-
On the vibrational properties of transition metal doped ZnO: surface, defect, and bandgap engineering
Authors:
Viviane M. A. Lage,
Carlos Rodríguez-Fernández,
Felipe S. Vieira,
Rafael T. da Silva,
Maria Inês B. Bernardi,
Maurício M de Lima Jr.,
Andrés Cantarero,
Hugo B. de Carvalho
Abstract:
We present a comprehensive study on the structure and optical properties of Mn-and Co-doped ZnO samples prepared via solid-state reaction method with different dopant concentrations and atmospheres. The samples were structural and chemically characterized via X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray excited photoelectron spectroscopy. The opt…
▽ More
We present a comprehensive study on the structure and optical properties of Mn-and Co-doped ZnO samples prepared via solid-state reaction method with different dopant concentrations and atmospheres. The samples were structural and chemically characterized via X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray excited photoelectron spectroscopy. The optical characterization was performed via Raman, photoluminescence, and diffuse photoreflectance spectroscopies. Emphasis was done on the studies of their vibrational properties. The structural data confirm the incorporation of Mn and Co ions into the wurtzite ZnO lattice. It is demonstrated that the usual observed additional bands in the Raman spectrum of transitional metal (TM) doped ZnO are related to structural damage, deriving from the do** process, and surface effects. The promoted surface optical phonons (SOP) are of Fröhlich character and, together with the longitudinal optical (LO) polar phonons, are directly dependent on the ZnO electronic structure. The enhancement of SOP and LO modes with TM-do** is explained in terms of nonhomogeneous do**, with the dopants concentrating mainly on the surface of grains, and a resonance effect due to the decrease of the ZnO bandgap promoted by the introduction of the 3d TM levels within the ZnO bandgap. We also discuss the origin of the controversial vibrational mode commonly observed in the Mn-doped ZnO system. It is stated that the observation of the analyzed vibrational properties is a signature of substitutional do** of the ZnO structure with tuning of ZnO optical absorption into the visible range of the electromagnetic spectrum.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Magnetization of Zn1-xCoxO nanoparticles: single-ion anisotropy and spin clustering
Authors:
X. Gratens,
B. de Abreu Silva,
M. I. B. Bernardi,
H. B. de Carvalho,
A. Franco Jr,
V. A. Chitta
Abstract:
The magnetization of Zn1-xCoxO (0.0055 < x < 0.073) nanoparticles has been measured as a function of temperature T (1.7 K < T , 10 K) and for magnetic field up to 65 kOe using a SQUID magnetometer. Samples were synthesized by three different growth methods: microwave-assisted hydrothermal, combustion reaction and sol-gel. For all studied samples, the magnetic properties derive from the antiferroma…
▽ More
The magnetization of Zn1-xCoxO (0.0055 < x < 0.073) nanoparticles has been measured as a function of temperature T (1.7 K < T , 10 K) and for magnetic field up to 65 kOe using a SQUID magnetometer. Samples were synthesized by three different growth methods: microwave-assisted hydrothermal, combustion reaction and sol-gel. For all studied samples, the magnetic properties derive from the antiferromagnetic (AF) spin clustering due to the Co2+ nearest neighbors. At T >= 6 K, the magnetization of the Co2+ ions has a Brillouin-type behavior, but below 6 K, it shows a notable deviation. We have shown that the observed deviation may be derived from single-ion anisotropy (SIA) with uniaxial symmetry. Results of fits show that the axial-SIA parameter D (typically D = 4.4 K) is slightly larger that the bulk value D = 3.97 K. No significant change of D has been observed as a function of the Co concentration or the growth process. For each sample, the SIA fit gave also the effective concentration (x) corresponding to the technical saturation value of the magnetization. Comparison of the concentration dependence of x with predictions based on cluster models shows an enhancement of the AF spin clustering independent of the growth method. This is ascribed to a clamped non-random distribution of the cobalt ions in the nanoparticles. The approach of the local concentration (xL) has been used to quantify the observed deviation from randomicity. Assuming a ZnO core/ Zn1-xCoxO shell nanoparticle, the thickness of the shell has been determined from the ratio xL/x.
△ Less
Submitted 12 May, 2022;
originally announced May 2022.
-
A comprehensive study on the processing of Co:ZnO ceramics: defect chemistry engineering and grain growth kinetics
Authors:
R. T. da Silva,
J. M. Morbec,
G. Rahman,
H. B. de Carvalho
Abstract:
In this report we present a systematic study on the preparation of Co:ZnO ceramics via standard solid-state route from different Co precursors (Co3O4, CoO and metallic Co) and atmospheres (O2 and Ar). Particular emphasis was done on the defect chemistry engineering and on the sintering growth kinetics. First-principles calculations based on density functional theory were employed to determine the…
▽ More
In this report we present a systematic study on the preparation of Co:ZnO ceramics via standard solid-state route from different Co precursors (Co3O4, CoO and metallic Co) and atmospheres (O2 and Ar). Particular emphasis was done on the defect chemistry engineering and on the sintering growth kinetics. First-principles calculations based on density functional theory were employed to determine the formation energy of the main point defects in ZnO and Co:ZnO systems. Based on the theoretical results a set of chemical reactions was proposed. A detailed microstructural characterization was performed in order to determine the degree of Co incorporation into the ZnO lattice. The samples prepared in Ar atmosphere and from metallic Co presents the highest Co solubility limit (lower apparent Co incorporation activation energy) due to the incongruent ZnO decomposition. The determination of the parameters of the sintering growth kinetics reveals that Co3O4 is the best sintering additive in order to achieve higher densities in both sintering atmospheres. The results give evidences that the sintering in O2 is effective in promoting zinc vacancies in the ZnO structure, while the sintering in Ar promotes zinc interstitial defects. Our findings give valuable contribution to the understanding of the preparation of Co-doped ZnO ceramics and the sintering growth kinetics, what would allow to improve the state of the art on the processing of the material at both bulk and nanometric scales.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
On the processing of anatase La-doped TiO2 nanopowders: structural phase transition and surface defect engineering
Authors:
M. P. Ferreira,
H. B. de Carvalho
Abstract:
The efforts in the optimization of the physical and chemical properties related to the photocatalytic efficiency of TiO2 nanoparticles relies mainly on defect engineering strategies, been the structural and the do** the most common ones. The do** of the anatase TiO2 structure with lanthanides elements potentially can turns the TiO2 optical absorption into the visible range increasing drastical…
▽ More
The efforts in the optimization of the physical and chemical properties related to the photocatalytic efficiency of TiO2 nanoparticles relies mainly on defect engineering strategies, been the structural and the do** the most common ones. The do** of the anatase TiO2 structure with lanthanides elements potentially can turns the TiO2 optical absorption into the visible range increasing drastically its photocatalytic efficiency. Here we show that the processing of TiO2 nanoparticles in oxygen atmosphere and the La do** stabilizes the anatase phase. The La incorporation takes place mainly in the surface of the nanoparticles leading to small nanoparticles as compared to the undoped TiO2. In spite of the effective La do**, the decrease of the energy bandgap is compensated by a quantum confinement effect related to the decrease in the nanoparticle size. However, the location of the La3+ ions on the surface of the nanoparticles induces a local concentration of oxygen vacancies that can increase the quantum efficiency of the system leading to higher photocatalytic activity.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Local and electronic structure of Sr1-xGdxTiO3 probed by X-ray absorption spectroscopy
Authors:
Alexandre Mesquita,
Elio Thizay Magnavita Oliveira,
Hugo Bonette de Carvalho
Abstract:
Gadolinium-doped strontium titanate is a typical perovskite structure material which has been studied due their thermomechanical, termoelectrical and electrochemical properties. In this study, local and electronic structure of Sr1-xGdxTiO3 samples were analyzed through X-ray absorption spectroscopy measurements. The results obtained with the adjustment of extended X-ray absorption fine structure (…
▽ More
Gadolinium-doped strontium titanate is a typical perovskite structure material which has been studied due their thermomechanical, termoelectrical and electrochemical properties. In this study, local and electronic structure of Sr1-xGdxTiO3 samples were analyzed through X-ray absorption spectroscopy measurements. The results obtained with the adjustment of extended X-ray absorption fine structure (EXAFS) spectra at Sr K-edge show that crystallographic model of Pm-3m space group is consistent with local structure around Sr atoms, as expected. This same analysis also reveals an increasing of the Debye-Waller as a function of the Gd content in some shells, which is associated with disorder induced by Sr vacancies due to the heterovalent Gd incorporation. EXAFS spectra at Gd LIII-edge for Sr1-xGdxTiO3 samples indicates regular GdO12 dodecahedra without displacement of Gd atoms from centrosymmetric position. A disorder was also identified in the shells beyond the first 12 O neighbors in which neither the crystallographic cubic structure of the SrTiO3 nor the orthorhombic structure of the GdTiO3 fits well. X-ray absorption near edge spectroscopy (XANES) spectrum at Ti LIII,II-edges shows an asymmetric peak because of the splitting between the eg orbitals of 3d band for SrTiO3 sample. The addition of Gd atoms to SrTiO3 structure cause an enlargement of this peak and this split is associated with a small displacement of Ti atoms from their centrosymmetric position. Several features of the XANES spectra at O k-edge for Sr1-xGdxTiO3 samples are affected by the increase of Gd concentration. According to our calculated projected density of states, these transitions are related to a reduction in the number of unoccupied O 2p - Ti 3d states caused by the split of Ti 3d band. Moreover, these XANES spectra also show a dependence of the increasing of the hybridization between O 2p and Gd 5d4f6s states.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
Effects of Reducing Heat Treatment on the Structural and the Magnetic Properties of Mn:ZnO Ceramics
Authors:
V. M. Almeida Lage,
R. T. da Silva,
A. Mesquita,
M. P. F. de Godoy,
X. Gratens,
d V. A. Chitta,
H. B. de Carvalho
Abstract:
Polycrystalline bulk Mn:ZnO ceramics with Mn nominal concentrations of 6, 11, 17 and 22 at.% were prepared trough solid-state reaction method and subjected to a heat treatment in reducing atmosphere (Ar (95%) and H2 (5%)). The samples were studied with particular emphasis on their compositions, structural, and magnetic properties. A detailed microstructural and chemical analysis confirms the Mn do…
▽ More
Polycrystalline bulk Mn:ZnO ceramics with Mn nominal concentrations of 6, 11, 17 and 22 at.% were prepared trough solid-state reaction method and subjected to a heat treatment in reducing atmosphere (Ar (95%) and H2 (5%)). The samples were studied with particular emphasis on their compositions, structural, and magnetic properties. A detailed microstructural and chemical analysis confirms the Mn do** of the wurtzite ZnO structure mainly at the surface of the ZnO grains. For the samples with higher Mn content, the secondary phases ZnMn2O4 and Mn1-xZnxO (Zn-doped MnO) were detected for the as prepared and the heat treated samples, respectively. The structural change of the secondary phases under heat treatment, from ZnMn2O4 to Mn1-xZnxO, confirms the effectiveness of the heat treatment in to reduce the valence of the metallic ions and in the formation of oxygen vacancies into the system. In spite of the induced defects, the magnetic analysis present only a paramagnetic behavior with an antiferromagnetic coupling between the Mn ions. In the context of the bound magnetic polaron theory, it is concluded that oxygen vacancies are not the necessary defect to promote the desired ferromagnetic order at room temperature.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Defect Induced Room Temperature Ferromagnetism in High Quality Co-doped ZnO Bulk Samples
Authors:
M. P. F. de Godoy,
X. Gratens,
V. A. Chitta,
A. Mesquita,
M. M de Lima Jr.,
A. Cantarero,
G. Rahman,
J. M. Morbec,
H. B. de Carvalho
Abstract:
The nature of the often reported room temperature ferromagnetism in transition metal doped oxides is still a matter of huge debate. Herein we report on room temperature ferromagnetism in high quality Co-doped ZnO (Zn1-xCoxO) bulk samples synthesized via standard solid-state reaction route. Reference paramagnetic Co-doped ZnO samples with low level of structural defects are subjected to heat treatm…
▽ More
The nature of the often reported room temperature ferromagnetism in transition metal doped oxides is still a matter of huge debate. Herein we report on room temperature ferromagnetism in high quality Co-doped ZnO (Zn1-xCoxO) bulk samples synthesized via standard solid-state reaction route. Reference paramagnetic Co-doped ZnO samples with low level of structural defects are subjected to heat treatments in a reductive atmosphere in order to introduce defects in the samples in a controlled way. A detailed structural analysis is carried out in order to characterize the induced defects and their concentration. The magnetometry revealed the coexistence of a paramagnetic and a ferromagnetic phase at room temperature in straight correlation with the structural properties. The saturation magnetization is found to increase with the intensification of the heat treatment, and, therefore, with the increase of the density of induced defects. The magnetic behavior is fully explained in terms of the bound magnetic polaron model. Based on the experimental findings, supported by theoretical calculations, we attribute the origin of the observed defect-induced-ferromagnetism to the ferromagnetic coupling between the Co ions mediated by magnetic polarons due to zinc interstitial defects.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Electric field inversion asymmetry: Rashba and Stark effects for holes in resonant tunneling devices
Authors:
H. B. de Carvalho,
M. J. S. P. Brasil,
V. Lopez-Richard,
I. Camps,
Y. Galvao Gobato,
G. E. Marques,
L. C. O. Dacal,
M. Henini,
L. Eaves,
G. Hill
Abstract:
We report experimental evidence of excitonic spin-splitting, in addition to the conventional Zeeman effect, produced by a combination of the Rashba spin-orbit interaction, Stark shift and charge screening. The electric-field-induced modulation of the spin-splitting are studied during the charging and discharging processes of p-type GaAs/AlAs double barrier resonant tunneling diodes (RTD) under a…
▽ More
We report experimental evidence of excitonic spin-splitting, in addition to the conventional Zeeman effect, produced by a combination of the Rashba spin-orbit interaction, Stark shift and charge screening. The electric-field-induced modulation of the spin-splitting are studied during the charging and discharging processes of p-type GaAs/AlAs double barrier resonant tunneling diodes (RTD) under applied bias and magnetic field. The abrupt changes in the photoluminescence, with the applied bias, provide information of the charge accumulation effects on the device.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
