-
Quantum Mechanics of Particles Constrained to Spiral Curves with Application to Polyene Chains
Authors:
Eduardo V. S. Anjos,
Antonio C. Pavão,
Luiz C. B. da Silva,
Cristiano C. Bastos
Abstract:
Context: Due to advances in synthesizing lower dimensional materials there is the challenge of finding the wave equation that effectively describes quantum particles moving on 1D and 2D domains. Jensen and Koppe and Da Costa independently introduced a confining potential formalism showing that the effective constrained dynamics is subjected to a scalar geometry-induced potential; for the confineme…
▽ More
Context: Due to advances in synthesizing lower dimensional materials there is the challenge of finding the wave equation that effectively describes quantum particles moving on 1D and 2D domains. Jensen and Koppe and Da Costa independently introduced a confining potential formalism showing that the effective constrained dynamics is subjected to a scalar geometry-induced potential; for the confinement to a curve, the potential depends on the curve's curvature function.
Method: To characterize the $π$ electrons in polyenes, we follow two approaches. First, we utilize a weakened Coulomb potential associated with a spiral curve. The solution to the Schrödinger equation with Dirichlet boundary conditions yields Bessel functions, and the spectrum is obtained analytically. We employ the particle-in-a-box model in the second approach, incorporating effective mass corrections. The $π$-$π^*$ transitions of polyenes were calculated in good experimental agreement with both approaches, although with different wave functions.
△ Less
Submitted 6 June, 2024; v1 submitted 5 June, 2024;
originally announced June 2024.
-
Curves and surfaces making a constant angle with a parallel transported direction in Riemannian spaces
Authors:
Luiz C. B. da Silva,
Gilson S. Ferreira Jr,
José D. da Silva
Abstract:
In the last two decades, much effort has been dedicated to studying curves and surfaces according to their angle with a given direction. However, most findings were obtained using a case-by-case approach, and it is often unclear what are consequences of the specificities of the ambient manifold and what could be generic. In this work, we propose a theoretical framework to unify parts of these find…
▽ More
In the last two decades, much effort has been dedicated to studying curves and surfaces according to their angle with a given direction. However, most findings were obtained using a case-by-case approach, and it is often unclear what are consequences of the specificities of the ambient manifold and what could be generic. In this work, we propose a theoretical framework to unify parts of these findings. We study curves and surfaces by prescribing the angle they make with a parallel transported vector field. We show that the characterization of Euclidean helices in terms of their curvature and torsion is also valid in any Riemannian manifold. Among other properties, we prove that surfaces making a constant angle with a parallel transported direction are extrinsically flat ruled surfaces. We also investigate the relation between their geodesics and the so-called slant helices; we prove that surfaces of constant angle are the rectifying surface of a slant helix, i.e., the ruled surface with rulings given by the Darboux vector field of the directrix. We characterize rectifying surfaces of constant angle; in other words, when their geodesics are slant helices. As a corollary, we show that if every geodesic of a surface of constant angle is a slant helix, then the ambient manifold is flat. Finally, we characterize surfaces in the product of a Riemannian surface with the real line making a constant angle with the vertical real direction.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Catenaries in Riemannian Surfaces
Authors:
Luiz C. B. da Silva,
Rafael López
Abstract:
The concept of catenary has been recently extended to the sphere and the hyperbolic plane by the second author [López, arXiv:2208.13694]. In this work, we define catenaries on any Riemannian surface. A catenary on a surface is a critical point of the potential functional, where we calculate the potential with the intrinsic distance to a fixed reference geodesic. Adopting semi-geodesic coordinates…
▽ More
The concept of catenary has been recently extended to the sphere and the hyperbolic plane by the second author [López, arXiv:2208.13694]. In this work, we define catenaries on any Riemannian surface. A catenary on a surface is a critical point of the potential functional, where we calculate the potential with the intrinsic distance to a fixed reference geodesic. Adopting semi-geodesic coordinates around the reference geodesic, we characterize catenaries using their curvature. Finally, after revisiting the space-form catenaries, we consider surfaces of revolution (where a Clairaut relation is established), ruled surfaces, and the Grušin plane.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Catenaries and minimal surfaces of revolution in hyperbolic space
Authors:
Luiz C. B. da Silva,
Rafael López
Abstract:
We introduce the concept of extrinsic catenary in the hyperbolic plane. Working in the hyperboloid model, we define an extrinsic catenary as the shape of a curve hanging under its weight as seen from the ambient space. In other words, an extrinsic catenary is a critical point of the potential functional, where we calculate the potential with the extrinsic distance to a fixed reference plane in the…
▽ More
We introduce the concept of extrinsic catenary in the hyperbolic plane. Working in the hyperboloid model, we define an extrinsic catenary as the shape of a curve hanging under its weight as seen from the ambient space. In other words, an extrinsic catenary is a critical point of the potential functional, where we calculate the potential with the extrinsic distance to a fixed reference plane in the ambient Lorentzian space. We then characterize extrinsic catenaries in terms of their curvature and as a solution to a prescribed curvature problem involving certain vector fields. In addition, we prove that the generating curve of any minimal surface of revolution in the hyperbolic space is an extrinsic catenary with respect to an appropriate reference plane. Finally, we prove that one of the families of extrinsic catenaries admits an intrinsic characterization if we replace the extrinsic distance with the intrinsic length of horocycles orthogonal to a reference geodesic.
△ Less
Submitted 11 June, 2023; v1 submitted 28 November, 2022;
originally announced November 2022.
-
Compatible director fields in $\mathbb{R}^3$
Authors:
Luiz C. B. da Silva,
Tal Bar,
Efi Efrati
Abstract:
The geometry and interactions between the constituents of a liquid crystal, which are responsible for inducing the partial order in the fluid, may locally favor an attempted phase that could not be realized in $\mathbb{R}^3$. While states that are incompatible with the geometry of $\mathbb{R}^3$ were identified more than 50 years ago, the collection of compatible states remained poorly understood…
▽ More
The geometry and interactions between the constituents of a liquid crystal, which are responsible for inducing the partial order in the fluid, may locally favor an attempted phase that could not be realized in $\mathbb{R}^3$. While states that are incompatible with the geometry of $\mathbb{R}^3$ were identified more than 50 years ago, the collection of compatible states remained poorly understood and not well characterized. Recently, the compatibility conditions for three-dimensional director fields were derived using the method of moving frames. These compatibility conditions take the form of six differential relations in five scalar fields locally characterizing the director field. In this work, we rederive these equations using a more transparent approach employing vector calculus. We then use these equations to characterize a wide collection of compatible phases.
△ Less
Submitted 14 February, 2023; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Catenaries and singular minimal surfaces in the simply isotropic space
Authors:
Luiz C. B. da Silva,
Rafael López
Abstract:
This paper investigates the hanging chain problem in the simply isotropic plane as well as its 2-dimensional analog in the simply isotropic space. The simply isotropic plane and space are two- and three-dimensional geometries equipped with a degenerate metric whose kernel has dimension 1. Although the metric is degenerate, the hanging chain and hanging surface problems are well-posed if we employ…
▽ More
This paper investigates the hanging chain problem in the simply isotropic plane as well as its 2-dimensional analog in the simply isotropic space. The simply isotropic plane and space are two- and three-dimensional geometries equipped with a degenerate metric whose kernel has dimension 1. Although the metric is degenerate, the hanging chain and hanging surface problems are well-posed if we employ the relative arc length and relative area to measure the weight. Here, the concepts of relative arc length and relative area emerge by seeing the simply isotropic geometry as a relative geometry. In addition to characterizing the simply isotropic catenary, i.e., the solutions of the hanging chain problem, we also prove that it is the generating curve of a minimal surface of revolution in the simply isotropic space. Finally, we obtain the 2-dimensional analog of the catenary, the so-called singular minimal surfaces, and determine the shape of a hanging surface of revolution in the simply isotropic space.
△ Less
Submitted 20 September, 2022; v1 submitted 4 September, 2022;
originally announced September 2022.
-
Characterization of manifolds of constant curvature by ruled surfaces
Authors:
Luiz C. B. da Silva,
José D. da Silva
Abstract:
We investigate ruled surfaces in 3d Riemannian manifolds, i.e., surfaces foliated by geodesics. In 3d space forms, we find the striction curve, distribution parameter, and the first and second fundamental forms, from which we obtain the Gaussian and mean curvatures. We also provide model-independent proof for the known fact that extrinsically flat surfaces in space forms are ruled. This proof allo…
▽ More
We investigate ruled surfaces in 3d Riemannian manifolds, i.e., surfaces foliated by geodesics. In 3d space forms, we find the striction curve, distribution parameter, and the first and second fundamental forms, from which we obtain the Gaussian and mean curvatures. We also provide model-independent proof for the known fact that extrinsically flat surfaces in space forms are ruled. This proof allows us to identify the necessary and sufficient condition the curvature tensor must satisfy for an extrinsically flat surface in a generic 3d manifold to be ruled. Further, we show that if a 3d manifold has an extrinsically flat surface tangent to any 2d plane and if they are all ruled surfaces, then the manifold is a space form. As an application, we prove that there must exist extrinsically flat surfaces in the Riemannian product of the hyperbolic plane, or sphere, with the reals, and that do not make a constant angle with the real direction.
△ Less
Submitted 20 September, 2022; v1 submitted 18 June, 2021;
originally announced June 2021.
-
Moving frames and compatibility conditions for three-dimensional director fields
Authors:
Luiz C. B. da Silva,
Efi Efrati
Abstract:
The geometry and topology of the region in which a director field is embedded impose limitations on the kind of supported orientational order. These limitations manifest as compatibility conditions that relate the quantities describing the director field to the geometry of the embedding space. For example, in two dimensions (2D) the splay and bend fields suffice to determine a director uniquely (u…
▽ More
The geometry and topology of the region in which a director field is embedded impose limitations on the kind of supported orientational order. These limitations manifest as compatibility conditions that relate the quantities describing the director field to the geometry of the embedding space. For example, in two dimensions (2D) the splay and bend fields suffice to determine a director uniquely (up to rigid motions) and must comply with one relation linear in the Gaussian curvature of the embedding manifold. In 3D there are additional local fields describing the director, i.e. fields available to a local observer residing within the material, and a number of distinct ways to yield geometric frustration. So far it was unknown how many such local fields are required to uniquely describe a 3D director field, nor what are the compatibility relations they must satisfy. In this work, we address these questions directly. We employ the method of moving frames to show that a director field is fully determined by five local fields. These fields are shown to be related to each other and to the curvature of the embedding space through six differential relations. As an application of our method, we characterize all uniform distortion director fields, i.e., directors for which all the local characterizing fields are constant in space, in manifolds of constant curvature. The classification of such phases has been recently provided for directors in Euclidean space, where the textures correspond to foliations of space by parallel congruent helices. For non-vanishing curvature, we show that the pure twist phase is the only solution in positively curved space, while in the hyperbolic space uniform distortion fields correspond to foliations of space by (non-necessarily parallel) congruent helices. Further analysis is expected to allow to also construct of new non-uniform director fields.
△ Less
Submitted 28 April, 2021; v1 submitted 15 February, 2021;
originally announced February 2021.
-
Holomorphic representation of minimal surfaces in simply isotropic space
Authors:
Luiz C. B. da Silva
Abstract:
It is known that minimal surfaces in Euclidean space can be represented in terms of holomorphic functions. For example, we have the well-known Weierstrass representation, where part of the holomorphic data is chosen to be the stereographic projection of the normal of the corresponding surface, and also the Björling representation, where it is prescribed a curve on the surface and the unit normal o…
▽ More
It is known that minimal surfaces in Euclidean space can be represented in terms of holomorphic functions. For example, we have the well-known Weierstrass representation, where part of the holomorphic data is chosen to be the stereographic projection of the normal of the corresponding surface, and also the Björling representation, where it is prescribed a curve on the surface and the unit normal on this curve. In this work, we are interested in the holomorphic representation of minimal surfaces in simply isotropic space, a three-dimensional space equipped with a rank 2 metric of index zero. Since the isotropic metric is degenerate, a surface normal cannot be unequivocally defined based on metric properties only, which leads to distinct definitions of an isotropic normal. As a consequence, this may also lead to distinct forms of a Weierstrass and of a Björling representation. Here, we show how to represent simply isotropic minimal surfaces in accordance with the choice of an isotropic surface normal.
△ Less
Submitted 27 September, 2021; v1 submitted 26 January, 2021;
originally announced January 2021.
-
Construction of exact minimal parking garages: nonlinear helical motifs in optimally packed lamellar structures
Authors:
Luiz C. B. da Silva,
Efi Efrati
Abstract:
Minimal surfaces arise as energy minimizers for fluid membranes and are thus found in a variety of biological systems. The tight lamellar structures of the endoplasmic reticulum and plant thylakoids are composed of such minimal surfaces in which right and left handed helical motifs are embedded in stoichiometry suggesting global pitch balance. So far, the analytical treatment of helical motifs in…
▽ More
Minimal surfaces arise as energy minimizers for fluid membranes and are thus found in a variety of biological systems. The tight lamellar structures of the endoplasmic reticulum and plant thylakoids are composed of such minimal surfaces in which right and left handed helical motifs are embedded in stoichiometry suggesting global pitch balance. So far, the analytical treatment of helical motifs in minimal surfaces was limited to the small-slope approximation where motifs are represented by the graph of harmonic functions. However, in most biologically and physically relevant regimes the inter-motif separation is comparable with its pitch, and thus this approximation fails. Here, we present a recipe for constructing exact minimal surfaces with an arbitrary distribution of helical motifs, showing that any harmonic graph can be deformed into a minimal surface by exploiting lateral displacements only. We analyze in detail pairs of motifs of the similar and of opposite handedness and also an infinite chain of identical motifs with similar or alternating handedness. Last, we study the second variation of the area functional for collections of helical motifs with asymptotic helicoidal structure and show that in this subclass of minimal surfaces stability requires that the collection of motifs is pitch balanced.
△ Less
Submitted 18 February, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Invariant surfaces with coordinate finite-type Gauss map in simply isotropic space
Authors:
Alev Kelleci,
Luiz C. B. da Silva
Abstract:
We consider the extrinsic geometry of surfaces in simply isotropic space, a three-dimensional space equipped with a rank 2 metric of index zero. Since the metric is degenerate, a surface normal cannot be unequivocally defined based on metric properties only. To understand the contrast between distinct choices of an isotropic Gauss map, here we study surfaces with a Gauss map whose coordinates are…
▽ More
We consider the extrinsic geometry of surfaces in simply isotropic space, a three-dimensional space equipped with a rank 2 metric of index zero. Since the metric is degenerate, a surface normal cannot be unequivocally defined based on metric properties only. To understand the contrast between distinct choices of an isotropic Gauss map, here we study surfaces with a Gauss map whose coordinates are eigenfunctions of the surface Laplace-Beltrami operator. We take into account two choices, the so-called minimal and parabolic normals, and show that when applied to simply isotropic invariant surfaces the condition that the coordinates of the corresponding Gauss map are eigenfunctions leads to planes, certain cylinders, or surfaces with constant isotropic mean curvature. Finally, we also investigate (non-necessarily invariant) surfaces with harmonic Gauss map and show this characterizes constant mean curvature surfaces.
△ Less
Submitted 12 November, 2020; v1 submitted 25 April, 2020;
originally announced April 2020.
-
Curves orthogonal to a vector field in Euclidean spaces
Authors:
Luiz C. B. da Silva,
Gilson S. Ferreira Jr
Abstract:
A curve is rectifying if it lies on a moving hyperplane orthogonal to its curvature vector. In this work, we extend the main result of [Chen 2017, Tamkang J. Math. 48, 209] to any space dimension: we prove that rectifying curves are geodesics on hypercones. We later use this association to characterize rectifying curves that are also slant helices in three-dimensional space as geodesics of circula…
▽ More
A curve is rectifying if it lies on a moving hyperplane orthogonal to its curvature vector. In this work, we extend the main result of [Chen 2017, Tamkang J. Math. 48, 209] to any space dimension: we prove that rectifying curves are geodesics on hypercones. We later use this association to characterize rectifying curves that are also slant helices in three-dimensional space as geodesics of circular cones. In addition, we consider curves that lie on a moving hyperplane normal to (i) one of the normal vector fields of the Frenet frame and to (ii) a rotation minimizing vector field along the curve. The former class is characterized in terms of the constancy of a certain vector field normal to the curve, while the latter contains spherical and plane curves. Finally, we establish a formal map** between rectifying curves in an $(m + 2)$-dimensional space and spherical curves in an $(m + 1)$-dimensional space. A curve is rectifying if it lies on a moving hyperplane orthogonal to its curvature vector.
△ Less
Submitted 21 September, 2022; v1 submitted 7 August, 2019;
originally announced August 2019.
-
Differential geometry of invariant surfaces in simply isotropic and pseudo-isotropic spaces
Authors:
Luiz C. B. da Silva
Abstract:
We study invariant surfaces generated by one-parameter subgroups of simply and pseudo isotropic rigid motions. Basically, the simply and pseudo isotropic geometries are the study of a three-dimensional space equipped with a rank 2 metric of index zero and one, respectively. We show that the one-parameter subgroups of isotropic rigid motions lead to seven types of invariant surfaces, which then gen…
▽ More
We study invariant surfaces generated by one-parameter subgroups of simply and pseudo isotropic rigid motions. Basically, the simply and pseudo isotropic geometries are the study of a three-dimensional space equipped with a rank 2 metric of index zero and one, respectively. We show that the one-parameter subgroups of isotropic rigid motions lead to seven types of invariant surfaces, which then generalizes the study of revolution and helicoidal surfaces in Euclidean and Lorentzian spaces to the context of singular metrics. After computing the two fundamental forms of these surfaces and their Gaussian and mean curvatures, we solve the corresponding problem of prescribed curvature for invariant surfaces whose generating curves lie on a plane containing the degenerated direction.
△ Less
Submitted 15 November, 2020; v1 submitted 28 September, 2018;
originally announced October 2018.
-
Characterization of manifolds of constant curvature by spherical curves
Authors:
Luiz C. B. da Silva,
José D. da Silva
Abstract:
It is known that the so-called rotation minimizing (RM) frames allow for a simple and elegant characterization of geodesic spherical curves in Euclidean, hyperbolic, and spherical spaces through a certain linear equation involving the coefficients that dictate the RM frame motion (da Silva, da Silva in Mediterr J Math 15:70, 2018). Here, we shall prove the converse, i.e., we show that if all geode…
▽ More
It is known that the so-called rotation minimizing (RM) frames allow for a simple and elegant characterization of geodesic spherical curves in Euclidean, hyperbolic, and spherical spaces through a certain linear equation involving the coefficients that dictate the RM frame motion (da Silva, da Silva in Mediterr J Math 15:70, 2018). Here, we shall prove the converse, i.e., we show that if all geodesic spherical curves on a Riemannian manifold are characterized by a certain linear equation, then all the geodesic spheres with a sufficiently small radius are totally umbilical and, consequently, the given manifold has constant sectional curvature. We also furnish two other characterizations in terms of (i) an inequality involving the mean curvature of a geodesic sphere and the curvature function of their curves and (ii) the vanishing of the total torsion of closed spherical curves in the case of three-dimensional manifolds. Finally, we also show that the same results are valid for semi-Riemannian manifolds of constant sectional curvature.
△ Less
Submitted 24 June, 2019; v1 submitted 16 September, 2018;
originally announced September 2018.
-
Differential Geometry of Rotation Minimizing Frames, Spherical Curves, and Quantum Mechanics of a Constrained Particle
Authors:
Luiz C. B. da Silva
Abstract:
This thesis is devoted to the Differential Geometry of curves and surfaces along with applications in Quantum Mechanics. In the 1st part we introduce the well known Frenet frame. Later, we show that the curvature function is a lower bound for the scalar angular velocity of any other orthonormal moving frame, from which one defines Rotation Minimizing (RM) frames as the ones that achieve this minim…
▽ More
This thesis is devoted to the Differential Geometry of curves and surfaces along with applications in Quantum Mechanics. In the 1st part we introduce the well known Frenet frame. Later, we show that the curvature function is a lower bound for the scalar angular velocity of any other orthonormal moving frame, from which one defines Rotation Minimizing (RM) frames as the ones that achieve this minimum. Remarkably, RM frames are ideal to study spherical curves and allow us to characterize them through a simple linear equation. We also apply these ideas to curves that lie on level surfaces, by reinterpreting the problem in the context of a metric induced by a Hessian, which may fail to be positive or non-degenerate and naturally leads us to a Lorentz-Minkowski $\mathbb{E}_1^3$ or isotropic $\mathbb{I}^3$ space. Here we develop a systematic approach to construct RM frames and characterize spherical curves in $\mathbb{E}_1^3$ and $\mathbb{I}^3$ and furnish a criterion for a curve to lie on a level surface. Finally, we extend these tools to characterize geodesic spherical curves in hyperbolic and spherical spaces. In the 2nd part we apply the previous ideas in the quantum dynamics of a constrained particle. After describing the confining potential formalism, from which emerges a geometry-induced potential (GIP), we devote our attention to tubular surfaces to model curved nanotubes. The use of RM frames offers a simpler description for the constrained dynamics and allows us to show that the torsion of the centerline of a tube gives rise to a geometric phase. Later, we study the problem of prescribed GIP for surfaces. Here we explore the GIP for surfaces invariant by a 1-parameter group of isometries, i.e., cylindrical, revolution, and helicoidal surfaces. Finally, we devote a special attention to helicoidal minimal surfaces and prove the existence of geometry-induced bound and localized states.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Schrödinger formalism for a particle constrained to a surface in $\mathbb{R}_1^3$
Authors:
Renato Teixeira,
Eduardo S. G. Leandro,
Luiz C. B. da Silva,
Fernando Moraes
Abstract:
In this work it is studied the Schrödinger equation for a non-relativistic particle restricted to move on a surface $S$ in a three-dimensional Minkowskian medium $\mathbb{R}_1^3$, i.e., the space $\mathbb{R}^3$ equipped with the metric $\text{diag}(-1,1,1)$. After establishing the consistency of the interpretative postulates for the new Schrödinger equation, namely the conservation of probability…
▽ More
In this work it is studied the Schrödinger equation for a non-relativistic particle restricted to move on a surface $S$ in a three-dimensional Minkowskian medium $\mathbb{R}_1^3$, i.e., the space $\mathbb{R}^3$ equipped with the metric $\text{diag}(-1,1,1)$. After establishing the consistency of the interpretative postulates for the new Schrödinger equation, namely the conservation of probability and the hermiticity of the new Hamiltonian built out of the Laplacian in $\mathbb{R}_1^3$, we investigate the confining potential formalism in the new effective geometry. Like in the well-known Euclidean case, it is found a geometry-induced potential acting on the dynamics $V_S = - \frac{\hbar^{2}}{2m} \left(\varepsilon H^2-K\right)$ which, besides the usual dependence on the mean ($H$) and Gaussian ($K$) curvatures of the surface, has the remarkable feature of a dependence on the signature of the induced metric of the surface: $\varepsilon= +1$ if the signature is $(-,+)$, and $\varepsilon=1$ if the signature is $(+,+)$. Applications to surfaces of revolution in $\mathbb{R}^3_1$ are examined, and we provide examples where the Schrödinger equation is exactly solvable. It is hoped that our formalism will prove useful in the modeling of novel materials such as hyperbolic metamaterials, which are characterized by a hyperbolic dispersion relation, in contrast to the usual spherical (elliptic) dispersion typically found in conventional materials.
△ Less
Submitted 30 October, 2018; v1 submitted 18 May, 2018;
originally announced May 2018.
-
Surfaces of revolution with prescribed mean and skew curvatures in Lorentz-Minkowski space
Authors:
Luiz C. B. da Silva
Abstract:
In this work, we investigate the problem of finding surfaces in the Lorentz-Minkowski 3-space with prescribed skew ($S$) and mean ($H$) curvatures, which are defined through the discriminant of the characteristic polynomial of the shape operator and its trace, respectively. After showing that $H$ and $S$ can be interpreted in terms of the expected value and standard deviation of the normal curvatu…
▽ More
In this work, we investigate the problem of finding surfaces in the Lorentz-Minkowski 3-space with prescribed skew ($S$) and mean ($H$) curvatures, which are defined through the discriminant of the characteristic polynomial of the shape operator and its trace, respectively. After showing that $H$ and $S$ can be interpreted in terms of the expected value and standard deviation of the normal curvature seen as a random variable, we address the problem of prescribed curvatures for surfaces of revolution. For surfaces with a non-lightlike axis and prescribed $H$, the strategy consists in rewriting the equation for $H$, which is initially a nonlinear second order Ordinary Differential Equation (ODE), as a linear first order ODE with coefficients in a certain ring of hypercomplex numbers along the generating curves: complex numbers for curves on a spacelike plane and Lorentz numbers for curves on a timelike plane. We also solve the problem for surfaces of revolution with a lightlike axis by using a certain ODE with real coefficients. On the other hand, for the skew curvature problem, we rewrite the equation for $S$, which is initially a nonlinear second order ODE, as a linear first order ODE with real coefficients. In all the problems, we are able to find the parameterization for the generating curves in terms of certain integrals of $H$ and $S$.
△ Less
Submitted 26 September, 2021; v1 submitted 1 April, 2018;
originally announced April 2018.
-
The geometry of Gauss map and shape operator in simply isotropic and pseudo-isotropic spaces
Authors:
Luiz C. B. da Silva
Abstract:
In this work, we are interested in the differential geometry of surfaces in simply isotropic $\mathbb{I}^3$ and pseudo-isotropic $\mathbb{I}_{\mathrm{p}}^3$ spaces, which consists of the study of $\mathbb{R}^3$ equipped with a degenerate metric such as $\mathrm{d}s^2=\mathrm{d}x^2\pm\mathrm{d}y^2$. The investigation is based on previous results in the simply isotropic space [B. Pavković, Glas. Mat…
▽ More
In this work, we are interested in the differential geometry of surfaces in simply isotropic $\mathbb{I}^3$ and pseudo-isotropic $\mathbb{I}_{\mathrm{p}}^3$ spaces, which consists of the study of $\mathbb{R}^3$ equipped with a degenerate metric such as $\mathrm{d}s^2=\mathrm{d}x^2\pm\mathrm{d}y^2$. The investigation is based on previous results in the simply isotropic space [B. Pavković, Glas. Mat. Ser. III $\mathbf{15}$, 149 (1980); Rad JAZU $\mathbf{450}$, 129 (1990)], which point to the possibility of introducing an isotropic Gauss map taking values on a unit sphere of parabolic type and of defining a shape operator from it, whose determinant and trace give the known relative Gaussian and mean curvatures, respectively. Based on the isotropic Gauss map, a new notion of connection is also introduced, the \emph{relative connection} (\emph{r-connection}, for short). We show that the new curvature tensor in both $\mathbb{I}^3$ and $\mathbb{I}_{\mathrm{p}}^3$ does not vanish identically and is directly related to the relative Gaussian curvature. We also compute the Gauss and Codazzi-Mainardi equations for the $r$-connection and show that $r$-geodesics on spheres of parabolic type are obtained via intersections with planes passing through their center (focus). Finally, we show that admissible pseudo-isotropic surfaces are timelike and that their shape operator may fail to be diagonalizable, in analogy to Lorentzian geometry. We also prove that the only totally umbilical surfaces in $\mathbb{I}_{\mathrm{p}}^3$ are planes and spheres of parabolic type and that, in contrast to the $r$-connection, the curvature tensor associated with the isotropic Levi-Civita connection vanishes identically for $any$ pseudo-isotropic surface, as also happens in simply isotropic space.
△ Less
Submitted 31 May, 2019; v1 submitted 3 January, 2018;
originally announced January 2018.
-
Characterization of curves that lie on a geodesic sphere or on a totally geodesic hypersurface in a hyperbolic space or in a sphere
Authors:
Luiz C. B. da Silva,
José Deibsom da Silva
Abstract:
The consideration of the so-called rotation minimizing frames allows for a simple and elegant characterization of plane and spherical curves in Euclidean space via a linear equation relating the coefficients that dictate the frame motion. In this work, we extend these investigations to characterize curves that lie on a geodesic sphere or totally geodesic hypersurface in a Riemannian manifold of co…
▽ More
The consideration of the so-called rotation minimizing frames allows for a simple and elegant characterization of plane and spherical curves in Euclidean space via a linear equation relating the coefficients that dictate the frame motion. In this work, we extend these investigations to characterize curves that lie on a geodesic sphere or totally geodesic hypersurface in a Riemannian manifold of constant curvature. Using that geodesic spherical curves are normal curves, i.e., they are the image of an Euclidean spherical curve under the exponential map, we are able to characterize geodesic spherical curves in hyperbolic spaces and spheres through a non-homogeneous linear equation. Finally, we also show that curves on totally geodesic hypersurfaces, which play the role of hyperplanes in Riemannian geometry, should be characterized by a homogeneous linear equation. In short, our results give interesting and significant similarities between hyperbolic, spherical, and Euclidean geometries.
△ Less
Submitted 26 March, 2018; v1 submitted 23 July, 2017;
originally announced July 2017.
-
Rotation minimizing frames and spherical curves in simply isotropic and pseudo-isotropic 3-spaces
Authors:
Luiz C. B. da Silva
Abstract:
In this work, we are interested in the differential geometry of curves in the simply isotropic and pseudo-isotropic 3-spaces, which are examples of Cayley-Klein geometries whose absolute figure is given by a plane at infinity and a degenerate quadric. Motivated by the success of rotation minimizing (RM) frames in Euclidean and Lorentzian geometries, here we show how to build RM frames in isotropic…
▽ More
In this work, we are interested in the differential geometry of curves in the simply isotropic and pseudo-isotropic 3-spaces, which are examples of Cayley-Klein geometries whose absolute figure is given by a plane at infinity and a degenerate quadric. Motivated by the success of rotation minimizing (RM) frames in Euclidean and Lorentzian geometries, here we show how to build RM frames in isotropic geometries and apply them in the study of isotropic spherical curves. Indeed, through a convenient manipulation of osculating spheres described in terms of RM frames, we show that it is possible to characterize spherical curves via a linear equation involving the curvatures that dictate the RM frame motion. For the case of pseudo-isotropic space, we also discuss on the distinct choices for the absolute figure in the framework of a Cayley-Klein geometry and prove that they are all equivalent approaches through the use of Lorentz numbers (a complex-like system where the square of the imaginary unit is $+1$). Finally, we also show the possibility of obtaining an isotropic RM frame by rotation of the Frenet frame through the use of Galilean trigonometric functions and dual numbers (a complex-like system where the square of the imaginary unit vanishes).
△ Less
Submitted 24 June, 2019; v1 submitted 19 July, 2017;
originally announced July 2017.
-
Characterization of Spherical and Plane Curves Using Rotation Minimizing Frames
Authors:
Luiz C. B. da Silva
Abstract:
In this work, we study plane and spherical curves in Euclidean and Lorentz-Minkowski 3-spaces by employing rotation minimizing (RM) frames. By conveniently writing the curvature and torsion for a curve on a sphere, we show how to find the angle between the principal normal and an RM vector field for spherical curves. Later, we characterize plane and spherical curves as curves whose position vector…
▽ More
In this work, we study plane and spherical curves in Euclidean and Lorentz-Minkowski 3-spaces by employing rotation minimizing (RM) frames. By conveniently writing the curvature and torsion for a curve on a sphere, we show how to find the angle between the principal normal and an RM vector field for spherical curves. Later, we characterize plane and spherical curves as curves whose position vector lies, up to a translation, on a moving plane spanned by their unit tangent and an RM vector field. Finally, as an application, we characterize Bertrand curves and slant helices as curves whose so-called natural mates are spherical and general helices, respectively.
△ Less
Submitted 21 September, 2022; v1 submitted 5 June, 2017;
originally announced June 2017.
-
Moving frames and the characterization of curves that lie on a surface
Authors:
Luiz C. B. da Silva
Abstract:
In this work we are interested in the characterization of curves that belong to a given surface. To the best of our knowledge, there is no known general solution to this problem. Indeed, a solution is only available for a few examples: planes, spheres, or cylinders. Generally, the characterization of such curves, both in Euclidean ($E^3$) and in Lorentz-Minkowski ($E_1^3$) spaces, involves an ODE…
▽ More
In this work we are interested in the characterization of curves that belong to a given surface. To the best of our knowledge, there is no known general solution to this problem. Indeed, a solution is only available for a few examples: planes, spheres, or cylinders. Generally, the characterization of such curves, both in Euclidean ($E^3$) and in Lorentz-Minkowski ($E_1^3$) spaces, involves an ODE relating curvature and torsion. However, by equip** a curve with a relatively parallel moving frame, Bishop was able to characterize spherical curves in $E^3$ through a linear equation relating the coefficients which dictate the frame motion. Here we apply these ideas to surfaces that are implicitly defined by a smooth function, $Σ=F^{-1}(c)$, by reinterpreting the problem in the context of the metric given by the Hessian of $F$, which is not always positive definite. So, we are naturally led to the study of curves in $E_1^3$. We develop a systematic approach to the construction of Bishop frames by exploiting the structure of the normal planes induced by the casual character of the curve, present a complete characterization of spherical curves in $E_1^3$, and apply it to characterize curves that belong to a non-degenerate Euclidean quadric. We also interpret the casual character that a curve may assume when we pass from $E^3$ to $E_1^3$ and finally establish a criterion for a curve to lie on a level surface of a smooth function, which reduces to a linear equation when the Hessian is constant.
△ Less
Submitted 17 July, 2017; v1 submitted 18 July, 2016;
originally announced July 2016.
-
Topological Approach to Microcanonical Thermodynamics and Phase Transition of Interacting Classical Spins
Authors:
F A N Santos,
L C B da Silva,
M D Coutinho-Filho
Abstract:
We propose a topological approach suitable to establish a connection between thermodynamics and topology in the microcanonical ensemble. Indeed, we report on results that point to the possibility of describing {\it interacting classical spin systems} in the thermodynamic limit, including the occurrence of a phase transition, using topology arguments only. Our approach relies on Morse theory, throu…
▽ More
We propose a topological approach suitable to establish a connection between thermodynamics and topology in the microcanonical ensemble. Indeed, we report on results that point to the possibility of describing {\it interacting classical spin systems} in the thermodynamic limit, including the occurrence of a phase transition, using topology arguments only. Our approach relies on Morse theory, through the determination of the critical points of the potential energy, which is the proper Morse function. Our main finding is to show that, in the context of the studied classical models, the Euler characteristic $χ(E)$ embeds the necessary features for a correct description of several magnetic thermodynamic quantities of the systems, such as the magnetization, correlation function, susceptibility, and critical temperature. Despite the classical nature of the studied models, such quantities are those that do not violate the laws of thermodynamics [with the proviso that Van der Waals loop states are mean field (MF) artifacts]. We also discuss the subtle connection between our approach using the Euler entropy, defined by the logarithm of the modulus of $χ(E)$ per site, and that using the {\it Boltzmann} microcanonical entropy. Moreover, the results suggest that the loss of regularity in the Morse function is associated with the occurrence of unstable and metastable thermodynamic solutions in the MF case. The reliability of our approach is tested in two exactly soluble systems: the infinite-range and the short-range $XY$ models in the presence of a magnetic field. In particular, we confirm that the topological hypothesis holds for both the infinite-range ($T_c \neq 0$) and the short-range ($T_c = 0$) $XY$ models. Further studies are very desirable in order to clarify the extension of the validity of our proposal.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
Quantum mechanics of a constrained particle and the problem of prescribed geometry-induced potential
Authors:
L. C. B. da Silva,
C. C. Bastos,
F. G. Ribeiro
Abstract:
The experimental techniques have evolved to a stage where various examples of nanostructures with non-trivial shapes have been synthesized, turning the dynamics of a constrained particle and the link with geometry into a realistic and important topic of research. Some decades ago, a formalism to deduce a meaningful Hamiltonian for the confinement was devised, showing that a geometry-induced potent…
▽ More
The experimental techniques have evolved to a stage where various examples of nanostructures with non-trivial shapes have been synthesized, turning the dynamics of a constrained particle and the link with geometry into a realistic and important topic of research. Some decades ago, a formalism to deduce a meaningful Hamiltonian for the confinement was devised, showing that a geometry-induced potential (GIP) acts upon the dynamics. In this work we study the problem of prescribed GIP for curves and surfaces in Euclidean space $\mathbb{R}^3$, i.e., how to find a curved region with a potential given {\it a priori}. The problem for curves is easily solved by integrating Frenet equations, while the problem for surfaces involves a non-linear 2nd order partial differential equation (PDE). Here, we explore the GIP for surfaces invariant by a 1-parameter group of isometries of $\mathbb{R}^3$, which turns the PDE into an ordinary differential equation (ODE) and leads to cylindrical, revolution, and helicoidal surfaces. Helicoidal surfaces are particularly important, since they are natural candidates to establish a link between chirality and the GIP. Finally, for the family of helicoidal minimal surfaces, we prove the existence of geometry-induced bound and localized states and the possibility of controlling the change in the distribution of the probability density when the surface is subjected to an extra charge.
△ Less
Submitted 3 September, 2018; v1 submitted 1 February, 2016;
originally announced February 2016.
