Showing 1–8 of 8 results for author: da Silva, A K

Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys

Authors: Jaber Rezaei Mianroodi, Pratheek Shanthraj, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe

Abstract: Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based poten… ▽ More Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based potential used in MCMD, as well as CALPHAD data. Simulation results for Mn segregation to, and spinodal decomposition along, straight screw and edge dislocations as well as dislocation loops, are compared with characterization results from atom probe tomography (APT) for two Fe-Mn alloy compositions. In contrast to classical Volterra dislocation theory, both MPFCM and MCMD predict a non-zero hydrostatic stress field in screw cores. Being of much smaller magnitude than the hydrostatic stress in straight edge cores, much less solute segregates to screw than to edge cores. In addition, the segregated amount in screw cores is below the critical concentration of 0.157 for the onset of spinodal decomposition along the line. Results from MPFCM-based modeling imply that the concentration dependence of the solute misfit distortion and resulting dependence of the elastic energy density on concentration have the strongest effect. The maximum amount of Mn segregating to straight edge dislocations predicted by MPFCM agrees well with APT results. The MPFCM model for Fe-Mn predicts little or no variation in Mn concentration along a straight dislocation line, in contrast to the APT results. As shown by the example of a dislocation loop in the current work, a change in the hydrostatic stress along the line due to changing character of dislocation does lead to a corresponding variation in Mn concentration. Such a variation in Mn concentration can also then be expected along a dislocation line with kinks or jogs. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Machine learning-enabled high-entropy alloy discovery

Authors: Ziyuan Rao, PoYen Tung, Ruiwen Xie, Ye Wei, Hongbin Zhang, Alberto Ferrari, T. P. C. Klaver, Fritz Körmann, Prithiv Thoudden Sukumar, Alisson Kwiatkowski da Silva, Yao Chen, Zhiming Li, Dirk Ponge, Jörg Neugebauer, Oliver Gutfleisch, Stefan Bauer, Dierk Raabe

Abstract: High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of… ▽ More High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of novel high-entropy Invar alloys in a practically infinite compositional space, based on very sparse data. Our approach works as a closed-loop, integrating machine learning with density-functional theory, thermodynamic calculations, and experiments. After processing and characterizing 17 new alloys (out of millions of possible compositions), we identified 2 high-entropy Invar alloys with extremely low thermal expansion coefficients around 2*10-6 K-1 at 300 K. Our study thus opens a new pathway for the fast and automated discovery of high-entropy alloys with optimal thermal, magnetic and electrical properties. △ Less

Submitted 28 February, 2022; originally announced February 2022.

Chemo-Mechanical Phase-Field Modeling of Iron Oxide Reduction with Hydrogen

Authors: Yang Bai, Jaber Rezaei Mianroodi, Yan Ma, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe

Abstract: The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical react… ▽ More The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical reactions, solid state and defect-mediated diffusion (by oxygen and hydrogen species), several phase transformations, as well as massive volume shrinkage and mechanical stress buildup. In this work, a chemo-mechanically coupled phase-field (PF) model has been developed to explore the interplay between phase transformation, chemical reaction, species diffusion, large elasto-plastic deformation and microstructure evolution. Energetic constitutive relations of the model are based on the system free energy which is calibrated with the help of a thermodynamic database. The model has been first applied to the classical core-shell (wüstite-iron) structure. Simulations show that the phase transformation from wüstite to alpha-iron can result in high stress and rapidly decelerating reaction kinetics. Mechanical stresses can contribute elastic energy to the system, making phase transformation difficult. Thus slow reaction kinetics and low metallization are observed. However, if the stress becomes comparatively high, it can shift the shape of the free energy from a double-well to a single-well case and speed up the transformation. The model has been further applied to simulate an actual iron oxide specimen with its complex microstructure, characterized by electron microscopy. The simulation results show that isolated pores in the microstructure are filled with water vapor during reduction, an effect which influences the local reaction atmosphere and dynamics. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Phase Separation and Anomalous Volume Expansion in Frozen Microscale Eutectic Indium-Gallium upon Remelting

Authors: Se-Ho Kim, Leigh T. Stephenson, Alisson K. da Silva, Baptiste Gault, Ayman A. El-Zoka

Abstract: The eutectic Ga-In (EGaIn) alloy has low vapor pressure, low toxicity, high thermal and electrical conductivities, and thus has shown a great potential for smart material applications. For such applications, EGaIn is maintained above its melting point, below which it undergoes solidification and phase separation. A scientific understanding of the structural and compositional evolution during therm… ▽ More The eutectic Ga-In (EGaIn) alloy has low vapor pressure, low toxicity, high thermal and electrical conductivities, and thus has shown a great potential for smart material applications. For such applications, EGaIn is maintained above its melting point, below which it undergoes solidification and phase separation. A scientific understanding of the structural and compositional evolution during thermal cycling could help further assess the application range of low-melting-point fusible alloys. Here, we use an integrated suite of cryogenically-enabled advanced microscopy & microanalysis to better understand phase separation and (re)mixing processes in EGaIn. We reveal an overlooked thermal-stimulus-response behaviour for frozen mesoscale EGaIn at cryogenic temperatures, with a sudden volume expansion observed during in-situ heat-cycling, associated with the immiscibility between Ga and In during cooling and the formation of metastable Ga phases. These results emphasize the importance of the kinetics of rejuvenation, and open new paths for EGaIn as a self-healing material. △ Less

Submitted 16 March, 2022; v1 submitted 26 May, 2021; originally announced May 2021.

Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys

Authors: Paraskevas Kontis, Edouard Chauvet, Zirong Peng, Junyang He, Alisson Kwiatkowski da Silva, Dierk Raabe, Catherine Tassin, Jean-Jacques Blandin, Stéphane Abed, Rémy Dendievel, Baptiste Gault, Guilhem Martin

Abstract: There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an impediment to designing engineering parts for safety-critical applications. Here, we deploy a near-atomic-scale approach to investigate the details of the compositi… ▽ More There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an impediment to designing engineering parts for safety-critical applications. Here, we deploy a near-atomic-scale approach to investigate the details of the compositional decoration of grain boundaries in the coarse-grained, columnar microstructure in parts built from a non-weldable Ni-based superalloy by selective electron-beam melting. The progressive enrichment in Cr, Mo and B at grain boundaries over the course of the AM-typical successive solidification and remelting events, accompanied by solid-state diffusion, causes grain boundary segregation induced liquation. This observation is consistent with thermodynamic calculations. We demonstrate that by adjusting build parameters to obtain a fine-grained equiaxed or a columnar microstructure with grain width smaller than 100 $μ$m enables to avoid cracking, despite strong grain boundary segregation. We find that the spread of critical solutes to a higher total interfacial area, combined with lower thermal stresses, helps to suppress interfacial liquation. △ Less

Submitted 1 August, 2019; v1 submitted 23 May, 2019; originally announced May 2019.

Comments: Accepted version at Acta Materialia

Segregation--Assisted Spinodal and Transient Spinodal Phase Separation at Grain Boundaries

Authors: Reza Darvishi Kamachali, Alisson Kwiatkowski da Silva, Eunan McEniry, Dirk Ponge, Baptiste Gault, Joerg Neugebauer, Dierk Raabe

Abstract: Segregation to grain boundaries affects their cohesion, corrosion and embrittlement and plays a critical role in heterogeneous nucleation. In order to quantitatively study segregation and phase separation at grain boundaries, we derive a density-based phase-field model. In this model, we describe the grain boundary free energy based on available bulk thermodynamic data while an atomic grain bounda… ▽ More Segregation to grain boundaries affects their cohesion, corrosion and embrittlement and plays a critical role in heterogeneous nucleation. In order to quantitatively study segregation and phase separation at grain boundaries, we derive a density-based phase-field model. In this model, we describe the grain boundary free energy based on available bulk thermodynamic data while an atomic grain boundary density is obtained using atomistic simulations. To benchmark the performance of the model, we study Mn grain boundary segregation in the Fe--Mn system. 3D simulation results are compared against atom probe tomography measurements. We show that a continuous increase in the alloy composition results in a discontinuous jump in the Mn grain boundary segregation. This jump corresponds to an interfacial spinodal phase separation. For alloy compositions above the interfacial spinodal, we found a transient spinodal phase separation phenomenon which opens opportunities for knowledge-based microstructure design through the chemical manipulation of grain boundaries. The proposed density-based model provides a powerful tool to study thermodynamics and kinetics of segregation and phase separation at grain boundaries. △ Less

Submitted 14 November, 2019; v1 submitted 20 May, 2019; originally announced May 2019.

Comments: 36 Pages, 8 Figures, Full paper &Supplementary Information, 85 References

Journal ref: npj Comutational Materials (2020) 191

Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy

Authors: Huan Zhao, Frédéric De Geuser, Alisson Kwiatkowski da Silva, Agnieszka Szczepaniak, Baptiste Gault, Dirk Ponge, Dierk Raabe

Abstract: Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion cracking. Here, we elucidate the sequence of precipitation on grain boundaries in comparison to the bulk in a model Al-Zn-Mg-Cu alloy. We investigate the material… ▽ More Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion cracking. Here, we elucidate the sequence of precipitation on grain boundaries in comparison to the bulk in a model Al-Zn-Mg-Cu alloy. We investigate the material from the solution heat treated state (475{\textdegree}C), through the very early stages of aging to the peak aged state at 120{\textdegree}C and further into the overaged regime at 180{\textdegree}C. The process starts with solute enrichment on grain boundaries due to equilibrium segregation accompanied by solute depletion in their vicinity, the formation of Guinier--Preston (GP) zones in the solute-enriched grain boundary regions, and GP zones growth and transformation. The equilibrium segregation of solutes to grain boundaries during aging accelerates this sequence compared to the bulk. Analysis of the ~10 nm wide precipitate-free zones (PFZs) adjacent to the solute-enriched grain boundaries 2 shows that the depletion zones are determined by (i) interface equilibrium segregation; (ii) formation and coarsening of the grain boundary precipitates and (iii) the diffusion range of solutes in the matrix. In addition, we quantify the difference in kinetics between grain boundary and bulk precipitation. The precipitation kinetics, as observed in terms of volume fraction, average radius, and number density, is almost identical next to the depletion zone in the bulk and far inside the bulk grain remote from any grain boundary influence. This observation shows that the region influenced by the grain boundaries does not extend beyond the PFZs. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Journal ref: Acta Materialia, Elsevier, 2018, 156, pp.318 - 329

Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4

Authors: A. J. Breen, I. Mouton, W. Lu, S. Wang, A. Szczepaniak, P. Kontis, L. T. Stephenson, Y. Chang, A. K. da Silva, C. Liebscher, D. Raabe, T. B. Britton, M. Herbig, B. Gault

Abstract: Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HC… ▽ More Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HCP ζphase deuteride (ZrD0.25-0.5) has been observed. Furthermore, Sn is rejected from the deuterides and segregates to the deuteride/α-Zr reaction front. △ Less

Submitted 28 June, 2018; v1 submitted 26 June, 2018; originally announced June 2018.