-
Resonant behavior and stability of a linear three-mirror cavity
Authors:
Paul Stevens,
Vincent Loriette,
Manuel Andia,
François Glotin,
Angélique Lartaux-Vollard,
Nicolas Leroy,
Aymeric van de Walle
Abstract:
The implementation of Fabry-Perot cavities in gravitational-wave detectors has been pivotal to improving their sensitivity, allowing the observation of an increasing number of cosmological events with higher signal-to-noise ratio. Notably, Fabry-Perot cavities play a key role in the frequency-dependent squeezing technique, which provides a reduction of quantum noise over the whole observation freq…
▽ More
The implementation of Fabry-Perot cavities in gravitational-wave detectors has been pivotal to improving their sensitivity, allowing the observation of an increasing number of cosmological events with higher signal-to-noise ratio. Notably, Fabry-Perot cavities play a key role in the frequency-dependent squeezing technique, which provides a reduction of quantum noise over the whole observation frequency spectrum. In this context, linear three-mirror cavities could be of interest because of the additional control that they can provide.
In this paper, we develop a complete model to describe the stability behavior and the properties of transmitted and reflected fields of a linear three-mirror cavity aiming to be used for design purposes. In particular, simulations are carried out to show the evolution of the characteristic "double-peak" as a function of cavity parameters, which is one of the key features of this system. We show that the double-peak shape is almost freely adjustable, either in terms of spacing between maxima, their relative height and their intrinsic width. This is made possible by changing the mirrors' reflectivity coefficients and their spacing. However, the amount of achievable realistic configurations is limited by the stability conditions of the cavity. In particular, if the middle mirror is not close enough to the center of the cavity, it could be difficult to obtain a stable three-mirror cavity. Different geometries have been studied to obtain a stable cavity system.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Ultralight vector dark matter search using data from the KAGRA O3GK run
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
I. Abouelfettouh,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi
, et al. (1778 additional authors not shown)
Abstract:
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we prese…
▽ More
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for $U(1)_{B-L}$ gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the $U(1)_{B-L}$ gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Search for Eccentric Black Hole Coalescences during the Third Observing Run of LIGO and Virgo
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi
, et al. (1750 additional authors not shown)
Abstract:
Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effect…
▽ More
Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass $M>70$ $M_\odot$) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities $0 < e \leq 0.3$ at $0.33$ Gpc$^{-3}$ yr$^{-1}$ at 90\% confidence level.
△ Less
Submitted 7 August, 2023;
originally announced August 2023.
-
Open data from the third observing run of LIGO, Virgo, KAGRA and GEO
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
A. Al-Jodah,
C. Alléné,
A. Allocca
, et al. (1719 additional authors not shown)
Abstract:
The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasti…
▽ More
The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasting 2 weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main dataset, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
A Survey on Deep Learning and Explainability for Automatic Report Generation from Medical Images
Authors:
Pablo Messina,
Pablo Pino,
Denis Parra,
Alvaro Soto,
Cecilia Besa,
Sergio Uribe,
Marcelo andía,
Cristian Tejos,
Claudia Prieto,
Daniel Capurro
Abstract:
Every year physicians face an increasing demand of image-based diagnosis from patients, a problem that can be addressed with recent artificial intelligence methods. In this context, we survey works in the area of automatic report generation from medical images, with emphasis on methods using deep neural networks, with respect to: (1) Datasets, (2) Architecture Design, (3) Explainability and (4) Ev…
▽ More
Every year physicians face an increasing demand of image-based diagnosis from patients, a problem that can be addressed with recent artificial intelligence methods. In this context, we survey works in the area of automatic report generation from medical images, with emphasis on methods using deep neural networks, with respect to: (1) Datasets, (2) Architecture Design, (3) Explainability and (4) Evaluation Metrics. Our survey identifies interesting developments, but also remaining challenges. Among them, the current evaluation of generated reports is especially weak, since it mostly relies on traditional Natural Language Processing (NLP) metrics, which do not accurately capture medical correctness.
△ Less
Submitted 8 January, 2022; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Accurate laser frequency locking to optical frequency combs under low-signal-to-noise-ratio conditions
Authors:
C. Guo,
M. Favier,
N. Galland,
V. Cambier,
H. Álvarez-Martínez,
M. Lours,
L. De Sarlo,
M. Andia,
R. Le Targat,
S. Bize
Abstract:
We demonstrate a method for accurately locking the frequency of a continuous-wave laser to an optical frequency comb in conditions where the signal-to-noise ratio is low, too low to accommodate other methods. Our method is typically orders of magnitude more accurate than conventional wavemeters and can considerably extend the usable wavelength range of a given optical frequency comb. We illustrate…
▽ More
We demonstrate a method for accurately locking the frequency of a continuous-wave laser to an optical frequency comb in conditions where the signal-to-noise ratio is low, too low to accommodate other methods. Our method is typically orders of magnitude more accurate than conventional wavemeters and can considerably extend the usable wavelength range of a given optical frequency comb. We illustrate our method by applying it to the frequency control of a dipole lattice trap for an optical lattice clock, a representative case where our method provides significantly better accuracy than other methods.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Microwave preparation of two-dimensional fermionic spin mixtures
Authors:
B. Peaudecerf,
M. Andia,
M. Brown,
E. Haller,
S. Kuhr
Abstract:
We present a method for preparing a single two-dimensional sample of a two-spin mixture of fermionic potassium in a single antinode of an optical lattice, in a quantum-gas microscope apparatus. Our technique relies on spatially-selective microwave transitions in a magnetic field gradient. Adiabatic transfer pulses were optimized for high efficiency and minimal atom loss and heating due to spin-cha…
▽ More
We present a method for preparing a single two-dimensional sample of a two-spin mixture of fermionic potassium in a single antinode of an optical lattice, in a quantum-gas microscope apparatus. Our technique relies on spatially-selective microwave transitions in a magnetic field gradient. Adiabatic transfer pulses were optimized for high efficiency and minimal atom loss and heating due to spin-changing collisions. We have measured the dynamics of those loss processes, which are more pronounced in the presence of a spin mixture. As the efficient preparation of atoms in a single antinode requires a homogeneous transverse magnetic field, we developed a method to image and minimize the magnetic field gradients in the focal plane of the microscope.
△ Less
Submitted 25 January, 2019; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Observation of Extra Photon Recoil in a Distorted Optical Field
Authors:
Satyanarayana Bade,
Lionel Djadaojee,
Manuel Andia,
Pierre Cladé,
Saïda Guellati-Khélifa
Abstract:
Light carries momentum which induces on atoms a recoil for each photon absorbed. In vacuum, for a monochromatic beam of frequency $ν$, the global momentum per photon is bounded by general principles and is smaller than $h ν/c$ leading to a limit on the recoil. However, locally this limit can be broken. In this paper, we give a general formula to calculate the recoil in vacuum. We show that in a la…
▽ More
Light carries momentum which induces on atoms a recoil for each photon absorbed. In vacuum, for a monochromatic beam of frequency $ν$, the global momentum per photon is bounded by general principles and is smaller than $h ν/c$ leading to a limit on the recoil. However, locally this limit can be broken. In this paper, we give a general formula to calculate the recoil in vacuum. We show that in a laser beam with a distorted optical field, there are regions where the recoil can be higher than this limit. Using atoms placed in those regions we are able to measure directly the extra recoil.
△ Less
Submitted 20 December, 2018; v1 submitted 11 December, 2017;
originally announced December 2017.
-
Sub-Doppler laser cooling of 40K with Raman gray molasses on the D2 line
Authors:
G. D. Bruce,
E. Haller,
B. Peaudecerf,
D. A. Cotta,
M. Andia,
S. Wu,
M. Y. H. Johnson,
B. W. Lovett,
S. Kuhr
Abstract:
Gray molasses is a powerful tool for sub-Doppler laser cooling of atoms to low temperatures. For alkaline atoms, this technique is commonly implemented with cooling lasers which are blue-detuned from either the D1 or D2 line. Here we show that efficient gray molasses can be implemented on the D2 line of 40K with red-detuned lasers. We obtained temperatures of 48(2) microKelvin, which enables direc…
▽ More
Gray molasses is a powerful tool for sub-Doppler laser cooling of atoms to low temperatures. For alkaline atoms, this technique is commonly implemented with cooling lasers which are blue-detuned from either the D1 or D2 line. Here we show that efficient gray molasses can be implemented on the D2 line of 40K with red-detuned lasers. We obtained temperatures of 48(2) microKelvin, which enables direct loading of 9.2(3)*10^6 atoms from a magneto-optical trap into an optical dipole trap. We support our findings by a one-dimensional model and three-dimensional numerical simulations of the optical Bloch equations which qualitatively reproduce the experimentally observed cooling effects.
△ Less
Submitted 14 December, 2016;
originally announced December 2016.
-
Compact atomic gravimeter based on a pulsed and accelerated optical lattice
Authors:
Manuel Andia,
Raphael Jannin,
François Nez,
François Biraben,
Saïda Guellati-Khélifa,
Pierre Cladé
Abstract:
We present a new scheme of compact atomic gravimeter based on atom interferometry. Atoms are maintained against gravity using a sequence of coherent accelerations performed by the Bloch oscillations technique. We demonstrate a sensitivity of 4.8$\times 10^{-8}$ with an integration time of 4 min. Combining this method with an atomic elevator allows to measure the local gravity at different position…
▽ More
We present a new scheme of compact atomic gravimeter based on atom interferometry. Atoms are maintained against gravity using a sequence of coherent accelerations performed by the Bloch oscillations technique. We demonstrate a sensitivity of 4.8$\times 10^{-8}$ with an integration time of 4 min. Combining this method with an atomic elevator allows to measure the local gravity at different positions in the vacuum chamber. This method can be of relevance to improve the measurement of the Newtonian gravitational constant $G$.
△ Less
Submitted 6 September, 2013;
originally announced September 2013.
