-
Wavelength-accurate and wafer-scale process for nonlinear frequency mixers in thin-film lithium niobate
Authors:
C. J. Xin,
Shengyuan Lu,
Jiayu Yang,
Amirhassan Shams-Ansari,
Boris Desiatov,
Letícia S. Magalhães,
Soumya S. Ghosh,
Erin McGee,
Dylan Renaud,
Nicholas Achuthan,
Arseniy Zvyagintsev,
David Barton III,
Neil Sinclair,
Marko Lončar
Abstract:
Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectri…
▽ More
Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectric poling, to fabrication tolerances. Here, we propose a scalable fabrication process aimed at improving the wavelength-accuracy of optical frequency mixers in TFLN. In contrast to the conventional pole-before-etch approach, we first define the waveguide in TFLN and then perform ferroelectric poling. This sequence allows for precise metrology before and after waveguide definition to fully capture the geometry imperfections. Systematic errors can also be calibrated by measuring a subset of devices to fine-tune the QPM design for remaining devices on the wafer. Using this method, we fabricated a large number of second harmonic generation devices aimed at generating 737 nm light, with 73% operating within 5 nm of the target wavelength. Furthermore, we also demonstrate thermo-optic tuning and trimming of the devices via cladding deposition, with the former bringing ~96% of tested devices to the target wavelength. Our technique enables the rapid growth of integrated quantum frequency converters, photon pair sources, and optical parametric amplifiers, thus facilitating the integration of TFLN-based nonlinear frequency mixers into more complex and functional photonic systems.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Pushing Least-Squares Deconvolution to the next level: application to binary stars
Authors:
A. Tkachenko,
V. Tsymbal,
Zvyagintsev,
H. Lehmann,
F. Petermann,
D. E. Mkrtichian
Abstract:
Eclipsing, spectroscopic double-lined (SB2) binaries remain to be the prime source of precise and accurate fundamental properties of stars. Furthermore, high-cadence spectroscopic observations of the eclipse phases allow us to resolve the Rossiter-McLaughlin effect whose modelling offers the means to probe spin-orbit misalignment in binaries.
In this study, we develop the LSDBinary algorithm tha…
▽ More
Eclipsing, spectroscopic double-lined (SB2) binaries remain to be the prime source of precise and accurate fundamental properties of stars. Furthermore, high-cadence spectroscopic observations of the eclipse phases allow us to resolve the Rossiter-McLaughlin effect whose modelling offers the means to probe spin-orbit misalignment in binaries.
In this study, we develop the LSDBinary algorithm that is capable of working with both in-eclipse and out-of-eclipse spectra of SB2 binaries as input and delivers the LSD profiles, LSD-based model spectra, and precise RVs of both binary components as output. We offer an option to account for the Rossiter-McLaughlin effect in the calculation of the initial guess LSD profiles and components' flux ratio such that the effect can be modelled within the algorithm itself.
We provide an extensive test of the LSDBinary software package on simulated spectra of artificial binaries. We study the effects of signal-to-noise-ratio of input spectra, resolving power of the instrument, uncertain atmospheric parameters of stars, and orbital properties of the binary system on the resulting LSD profiles and RVs measured from them. We find that atmospheric parameters have negligible effect on the shape of the computed LSD profiles while affecting mostly their global scaling. Our results are barely sensitive to signal-to-noise ratio of the input spectra provided they contain sufficient number of spectral lines, such as in A-type stars and later. Finally, the orbital inclination angle and components' radii ratio are found to have the largest effect on the shapes of the LSD profiles and RV curves extracted from them. The LSDBinary algorithm is specifically developed to perform detailed spectroscopic studies of eclipsing SB2 systems whose orbital configuration and components' atmospheric parameters are estimated by other means.
△ Less
Submitted 5 August, 2022;
originally announced August 2022.
-
Fundamental parameters and abundance analysis of the components in the SB2 system HD 60803
Authors:
T. Ryabchikova,
S. Zvyagintsev,
A. Tkachenko,
V. Tsymbal,
Yu. Pakhomov,
E. Semenko
Abstract:
We performed a detailed spectroscopic study of the SB2 system HD 60803 based on high-resolution spectra obtained with the different spectrographs. The analysis was done with two independent methods: a) the direct modelling of the observed binary spectrum by a sum of synthetic spectra varying a set of free parameters and minimizing a difference between the observed and theoretical spectra; b) spect…
▽ More
We performed a detailed spectroscopic study of the SB2 system HD 60803 based on high-resolution spectra obtained with the different spectrographs. The analysis was done with two independent methods: a) the direct modelling of the observed binary spectrum by a sum of synthetic spectra varying a set of free parameters and minimizing a difference between the observed and theoretical spectra; b) spectrum disentangling and an independent modelling of the individual components. Being applied to binary spectra from different spectrographs both methods converge to a consistent solution for the fundamental parameters of the HD 60803 components: $T_{\rm eff}$=6055$\pm$70 K, $\log{g}$=4.08$\pm$0.12, $ζ_{\rm RT}$=1.45$\pm$0.18 km s$^{-1}$, [M/H]=0.03$\pm$0.06 (primary), and $T_{\rm eff}$=6069$\pm$70 K, $\log{g}$=4.14$\pm$0.09, $ζ_{\rm RT}$=1.48$\pm$0.18 km s$^{-1}$, [M/H]=0.03$\pm$0.06 (secondary). Differential abundance analysis of the components did not reveal any significant difference in their chemical composition. Besides Li both components have solar atmospheric abundances. Li abundance exceeds the solar one by $\sim$2 dex, but it agrees with Li abundance in main-sequence late F-stars. Relative-to-solar abundances in both components slightly correlate with the condensation temperature the same way as was found in the solar analogs with/without detected giant planets. The estimated age of the system is 5.5$\pm$0.5 Gyr.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Measurements of the Charge Asymmetry of the Dalitz Plot Parameters for $K^{\pm}\toπ^{\pm}π^0π^0$ Decays
Authors:
G. A. Akopdzhanov,
V. B. Anikeev,
V. A. Bezzubov,
S. P. Denisov,
A. A. Durum,
Yu. V. Gilitsky,
S. N. Gurzhiev,
V. M. Korablev,
V. I. Koreshev,
A. V. Kozelov,
E. A. Kozlovsky,
V. I. Kurbakov,
V. V. Lipaev,
V. A. Onuchin,
A. M. Rybin,
Yu. M. Sapunov,
A. A. Schukin,
M. M. Soldatov,
D. A. Stoyanova,
K. I. Trushin,
I. A. Vasilyev,
V. I. Yakimchuk,
S. A. Zvyagintsev
Abstract:
The charge asymmetry of the g, h, and k Dalitz plot parameters for $K^{\pm}\toπ^{\pm}π^0π^0$ decays has been measured with 35 GeV/c hadron beams at the 70 GeV IHEP accelerator. The g, h and k values obtained appear to be identical for $K^{\pm}\toπ^{\pm}π^0π^0$ decays within the errors quoted. In particular, the charge asymmetry $A_g = (g^+ - g^-)/(g^+ + g^-)$ of the slope g is equal to…
▽ More
The charge asymmetry of the g, h, and k Dalitz plot parameters for $K^{\pm}\toπ^{\pm}π^0π^0$ decays has been measured with 35 GeV/c hadron beams at the 70 GeV IHEP accelerator. The g, h and k values obtained appear to be identical for $K^{\pm}\toπ^{\pm}π^0π^0$ decays within the errors quoted. In particular, the charge asymmetry $A_g = (g^+ - g^-)/(g^+ + g^-)$ of the slope g is equal to $(0.2 \pm 1.9)\cdot 10^{-3}$.
△ Less
Submitted 2 June, 2004;
originally announced June 2004.
-
Interpretation of intuitionistic solution of the vacuum Einstein equations in smooth topos
Authors:
A. K. Guts,
A. A. Zvyagintsev
Abstract:
The topos theory is a theory which is used for deciding a number of problems of theory of relativity, gravitation and quantum physics. In the article spherically symmetric solution of the vacuum Einstein equations in the Intuitionistic theory of Gravitation at different stages of smooth topos ${\bf Set}^{\bf L_{op}}$ is considered. Infinitesimal "weak" gravitational field can be strong at some s…
▽ More
The topos theory is a theory which is used for deciding a number of problems of theory of relativity, gravitation and quantum physics. In the article spherically symmetric solution of the vacuum Einstein equations in the Intuitionistic theory of Gravitation at different stages of smooth topos ${\bf Set}^{\bf L_{op}}$ is considered. Infinitesimal "weak" gravitational field can be strong at some stagies, for which we have the additional dimensions. For example, the cosmological constant is not constant with respect to additional dimensions. Signature of space-time metric can depend of density of vacuum and cosmological constant.
△ Less
Submitted 24 January, 2000;
originally announced January 2000.
-
Solution of the vacuum Einstein equations in Synthetic Differential Geometry of Kock-Lawvere
Authors:
Alexander K. Guts,
Artem A. Zvyagintsev
Abstract:
The topos theory is a theory which is used for deciding a number of problems of theory of relativity, gravitation and quantum physics. It is known that topos-theoretic geometry can be successfully developed within the framework of Synthetic Differential Geometry of Kock-Lawvere (SDG), the models of which are serving the toposes, i.e. categories possessing many characteristics of traditional Theo…
▽ More
The topos theory is a theory which is used for deciding a number of problems of theory of relativity, gravitation and quantum physics. It is known that topos-theoretic geometry can be successfully developed within the framework of Synthetic Differential Geometry of Kock-Lawvere (SDG), the models of which are serving the toposes, i.e. categories possessing many characteristics of traditional Theory of Sets. In the article by using ideas SDG, non-classical spherically symmetric solution of the vacuum Einstein equations is given.
△ Less
Submitted 5 October, 1999; v1 submitted 9 September, 1999;
originally announced September 1999.
