Showing 1–22 of 22 results for author: Zobelli, A

Excitonic Absorption Signatures of Twisted Bilayer WSe$_{2}$ by Electron Energy-Loss Spectroscopy

Authors: Steffi Y. Woo, Alberto Zobelli, Robert Schneider, Ashish Arora, Johann A. Preuß, Benjamin J. Carey, Steffen Michaelis de Vasconcellos, Maurizia Palummo, Rudolf Bratschitsch, Luiz H. G. Tizei

Abstract: Moiré twist angle underpins the interlayer interaction of excitons in twisted van der Waals hetero- and homo-structures. The influence of twist angle on the excitonic absorption of twisted bilayer tungsten diselenide (WSe$_{2}$) has been investigated using electron energy-loss spectroscopy. Atomic-resolution imaging by scanning transmission electron microscopy was used to determine key structural… ▽ More Moiré twist angle underpins the interlayer interaction of excitons in twisted van der Waals hetero- and homo-structures. The influence of twist angle on the excitonic absorption of twisted bilayer tungsten diselenide (WSe$_{2}$) has been investigated using electron energy-loss spectroscopy. Atomic-resolution imaging by scanning transmission electron microscopy was used to determine key structural parameters, including the nanoscale measurement of the relative twist angle and stacking order. Detailed spectral analysis revealed a pronounced blueshift in the high-energy excitonic peak C with increasing twist angle, up to 200 meV when compared to the AA$^{\prime}$ stacking. The experimental findings have been discussed relative to first-principle calculations of the dielectric response of the AA$^{\prime}$ stacked bilayer WSe$_{2}$ as compared to monolayer WSe$_{2}$ by employing the \textit{GW} plus Bethe-Salpeter equation (BSE) approaches, resolving the origin of higher energy spectral features from ensembles of excitonic transitions, and thus any discrepancies between previous calculations. Furthermore, the electronic structure of moiré supercells spanning twist angles of $\sim$9.5-46.5$^{\circ}$ calculated by density functional theory (DFT) were unfolded, showing an uplifting of the conduction band minimum near the $Q$ point and minimal change in the upper valence band concurrently. The combined experiment/theory investigation provides valuable insight into the physical origins of high-energy absorption resonances in twisted bilayers, which enables to track the evolution of interlayer coupling from tuning of the exciton C transitions by absorption spectroscopy. △ Less

Submitted 22 December, 2022; originally announced December 2022.

On-surface synthesis and evolution of self-assembled poly($p$-phenylene) chains on Ag(111): a joint experimental and theoretical study

Authors: Viktoria V. Ivanovskaya, Alberto Zobelli, Andrea Basagni, Stefano Casalini, Luciano Colazzo, Francesco de Boni, Dimas G. de Oteyza, Mauro Sambi, Francesco Sedona

Abstract: The growth of controlled 1D carbon-based nanostructures on metal surfaces is a multistep process whose path, activation energies and intermediate metastable states strongly depend on the employed substrate. Whereas this process has been extensively studied on gold, less work has been dedicated to silver surfaces, which have a rather different catalytic activity. In this work, we present an experim… ▽ More The growth of controlled 1D carbon-based nanostructures on metal surfaces is a multistep process whose path, activation energies and intermediate metastable states strongly depend on the employed substrate. Whereas this process has been extensively studied on gold, less work has been dedicated to silver surfaces, which have a rather different catalytic activity. In this work, we present an experimental and theoretical investigation of the growth of poly-$p$-phenylene (PPP) chains and subsequent narrow graphene ribbons starting from 4,4''-dibromo-$p$-terphenyl molecular precursors deposited at the silver surface. By combing scanning tunneling microscopy (STM) imaging and density functional theory (DFT) simulations, we describe the molecular morphology and organization at different steps of the growth process and we discuss the stability and conversion of the encountered species on the basis of calculated thermodynamic quantities. Unlike the case of gold, at the debromination step we observe the appearance of organometallic molecules and chains, which can be explained by their negative formation energy in the presence of a silver adatom reservoir. At the dehydrogenation temperature the persistence of intercalated Br atoms hinders the formation of well-structured graphene ribbons, which are instead observed on gold, leading only to a partial lateral coupling of the PPP chains. We numerically derive very different activation energies for Br desorption from the Ag and Au surfaces, thereby confirming the importance of this process in defining the kinetics of the formation of molecular chains and graphene ribbons on different metal surfaces. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Electronic structure of folded hexagonal boron nitride

Authors: Anthony Impellizzeri, Michele Amato, Chris P. Ewels, Alberto Zobelli

Abstract: Folded regions are commonly encountered in a number of hexagonal boron nitride (h-BN) based bulk and nanostructured materials. Two types of structural modifications occur in folded h-BN layers: local curvature at the folded edges and interlayer shear of the layers which changes the stacking of the overlap** flat regions. In this work we discuss, via density functional theory simulations, the imp… ▽ More Folded regions are commonly encountered in a number of hexagonal boron nitride (h-BN) based bulk and nanostructured materials. Two types of structural modifications occur in folded h-BN layers: local curvature at the folded edges and interlayer shear of the layers which changes the stacking of the overlap** flat regions. In this work we discuss, via density functional theory simulations, the impact of these structural modifications on the ground state electronic structure of the pristine monolayer. We show that, depending on the fold orientation, the overlap** region might present different stacking configurations with subsequent variations of the fundamental band gap; further gap changes occur at the folded regions. The overall electronic structure of a BN folded monolayer can finally be described as a type-II junction between two wide gap semiconductors located at the curved and flat overlap** zones. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Journal ref: J. Phys. Chem. C 126, 17746 (2022)

Cathodoluminescence excitation spectroscopy: nanoscale imaging of excitation pathways

Authors: Nadezda Varkentina, Yves Auad, Steffi Y. Woo, Alberto Zobelli, Jean-Denis Blazit, Xiaoyan Li, Marcel Tencé, Kenji Watanabe, Takashi Taniguchi, Odile Stéphan, Mathieu Kociak, Luiz H. G. Tizei

Abstract: Following the lifespan of optical excitations from their creation to decay into photons is crucial in understanding materials optical properties. Macroscopically, techniques such as the photoluminescence excitation spectroscopy provide unique information on the photophysics of materials with applications as diverse as quantum optics or photovoltaics. Materials excitation and emission pathways are… ▽ More Following the lifespan of optical excitations from their creation to decay into photons is crucial in understanding materials optical properties. Macroscopically, techniques such as the photoluminescence excitation spectroscopy provide unique information on the photophysics of materials with applications as diverse as quantum optics or photovoltaics. Materials excitation and emission pathways are affected by nanometer scale variations directly impacting devices performances. However, they cannot be directly accessed, despite techniques, such as optical spectroscopies with free electrons, having the relevant spatial, spectral or time resolution. Here, we explore optical excitation creation and decay in two representative optical devices: plasmonic nanoparticles and luminescent 2D layers. The analysis of the energy lost by an exciting electron that is coincident in time with a visible-UV photon unveils the decay pathways from excitation towards light emission. This is demonstrated for phase-locked interactions, such as in localized surface plasmons, and non-phase-locked ones, such as the light emission by individual point defects. This newly developed cathodoluminescence excitation spectroscopy images energy transfer pathways at the nanometer scale. It widens the toolset available to explore nanoscale materials. △ Less

Submitted 8 July, 2022; v1 submitted 25 February, 2022; originally announced February 2022.

Band gap measurements of monolayer h-BN and insights into carbon-related point defects

Authors: Ricardo Javier Peña Román, Fábio J R Costa Costa, Alberto Zobelli, Christine Elias, Pierre Valvin, Guillaume Cassabois, Bernard Gil, Alex Summerfield, Tin S Cheng, Christopher J Mellor, Peter H Beton, Sergei V Novikov, Luiz F Zagonel

Abstract: Being a flexible wide band gap semiconductor, hexagonal boron nitride (h-BN) has great potential for technological applications like efficient deep ultraviolet light sources, building block for two-dimensional heterostructures and room temperature single photon emitters in the ultraviolet and visible spectral range. To enable such applications, it is mandatory to reach a better understanding of th… ▽ More Being a flexible wide band gap semiconductor, hexagonal boron nitride (h-BN) has great potential for technological applications like efficient deep ultraviolet light sources, building block for two-dimensional heterostructures and room temperature single photon emitters in the ultraviolet and visible spectral range. To enable such applications, it is mandatory to reach a better understanding of the electronic and optical properties of h-BN and the impact of various structural defects. Despite the large efforts in the last years, aspects such as the electronic band gap value, the exciton binding energy and the effect of point defects remained elusive, particularly when considering a single monolayer. Here, we directly measured the density of states of a single monolayer of h-BN epitaxially grown on highly oriented pyrolytic graphite, by performing low temperature scanning tunneling microscopy (STM) and spectroscopy (STS). The observed h-BN electronic band gap on defect-free regions is $(6.8\pm0.2)$ eV. Using optical spectroscopy to obtain the h-BN optical band gap, the exciton binding energy is determined as being of $(0.7\pm0.2)$ eV. In addition, the locally excited cathodoluminescence and photoluminescence show complex spectra that are typically associated to intragap states related to carbon defects. Moreover, in some regions of the monolayer h-BN we identify, using STM, point defects which have intragap electronic levels around 2.0 eV below the Fermi level. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Comments: 50 Pages, 8 Figures, 100+ references

Journal ref: 2D Material 8 044001 (2021)

Nanoscale modification of WS$_2$ trion emission by its local electromagnetic environment

Authors: Noémie Bonnet, Hae Yeon Lee, Fuhui Shao, Steffi Y. Woo, Jean-Denis Blazit, Kenji Watanabe, Takashi Taniguchi, Alberto Zobelli, Odile Stéphan, Mathieu Kociak, Silvija Gradecak-Garaj, Luiz H. G. Tizei

Abstract: Structural, electronic, and chemical nanoscale modifications of transition metal dichalcogenide monolayers alter their optical properties, including the generation of single photon emitters. A key missing element for complete control is a direct spatial correlation of optical response to nanoscale modifications, due to the large gap in spatial resolution between optical spectroscopy and nanometer… ▽ More Structural, electronic, and chemical nanoscale modifications of transition metal dichalcogenide monolayers alter their optical properties, including the generation of single photon emitters. A key missing element for complete control is a direct spatial correlation of optical response to nanoscale modifications, due to the large gap in spatial resolution between optical spectroscopy and nanometer resolved techniques, such as transmission electron microscopy or scanning tunneling microscopy. Here, we bridge this gap by obtaining nanometer resolved optical properties using electron spectroscopy, specifically electron energy loss spectroscopy (EELS) for absorption and cathodoluminescence (CL) for emission, which were directly correlated to chemical and structural information. In an h-BN/WS$_2$/h-BN heterostructure, we observe local modulation of the trion (X$^{-}$) emission due to tens of nanometer wide dielectric patches, while the exciton, X$_A$, does not follow the same modulation. Trion emission also increases in regions where charge accumulation occurs, close to the carbon film supporting the heterostructures. Finally, localized exciton emission (L) detection is not correlated to strain variations above 1 $\%$, suggesting point defects might be involved in their formations. △ Less

Submitted 12 February, 2021; v1 submitted 11 February, 2021; originally announced February 2021.

Extrinsic do** in group IV hexagonal-diamond type crystals

Authors: Michele Amato, Thanayut Kaewmaraya, Alberto Zobelli

Abstract: Over the last few years, group IV hexagonal-diamond type crystals have acquired great attention in semiconductor physics thanks to the appearance of novel and very effective growth methods. However, many questions remain unaddressed on their extrinsic do** capability and on how it compares to those of diamond-like structures. This point is here investigated through numerical simulations conducte… ▽ More Over the last few years, group IV hexagonal-diamond type crystals have acquired great attention in semiconductor physics thanks to the appearance of novel and very effective growth methods. However, many questions remain unaddressed on their extrinsic do** capability and on how it compares to those of diamond-like structures. This point is here investigated through numerical simulations conducted in the framework of the Density Functional Theory (DFT). The comparative analysis for group III and V dopant atoms shows that: i) in diamond-type crystals the bulk sites symmetry ($T_d$) is preserved by do** while in hexagonal crystals the impurity site moves towards a higher ($T_d$) or lower ($C_{3v}$) symmetry configuration dependently on the valence of the dopant atoms; ii) for Si and Ge, group III impurities can be more easily introduced in the hexagonal-diamond phase, whose local $C_{3v}$ symmetry better accommodates the three-fold coordination of the impurity, while n-type impurities do not reveal any marked phase preference; iii) for C, both n and p dopants are more stable in the hexagonal-diamond structure than in the the cubic one, but this tendency is much more pronounced for n-type impurities. △ Less

Submitted 8 July, 2020; originally announced July 2020.

Spatial and spectral dynamics in STEM hyperspectral imaging using random scan patterns

Authors: Alberto Zobelli, Steffi Y. Woo, Luiz H. G. Tizei, Nathalie Brun, Anna Tararan, Xiaoyan Li, Odile Stéphan, Mathieu Kociak, Marcel Tencé

Abstract: The evolution of the scanning modules for scanning transmission electron microscopes (STEM) has realized the possibility to generate arbitrary scan pathways, an approach currently explored to improve acquisition speed and to reduce electron dose effects. In this work, we present the implementation of a random scan operating mode in STEM achieved at the hardware level via a custom scan control modu… ▽ More The evolution of the scanning modules for scanning transmission electron microscopes (STEM) has realized the possibility to generate arbitrary scan pathways, an approach currently explored to improve acquisition speed and to reduce electron dose effects. In this work, we present the implementation of a random scan operating mode in STEM achieved at the hardware level via a custom scan control module. A pre-defined pattern with fully shuffled raster order is used to sample the entire region of interest. Subsampled random sparse images can then be extracted at successive time frames, to which suitable image reconstruction techniques can be applied. With respect to the conventional raster scan mode, this method permits to limit dose accumulation effects, but also to decouple the spatial and temporal information in hyperspectral images. We provide some proofs of concept of the flexibility of the random scan operating mode, presenting examples of its applications in different spectro-microscopy contexts: atomically-resolved elemental maps with electron energy loss spectroscopy and nanoscale-cathodoluminescence spectrum images. By employing adapted post-processing tools, it is demonstrated that the method allows to precisely track and correct for sample instabilities and to follow spectral diffusion with a high spatial localization. △ Less

Submitted 17 September, 2019; originally announced September 2019.

Tailored nanoscale plasmon-enhanced vibrational electron spectroscopy

Authors: Luiz H. G. Tizei, Vahagn Mkhitaryan, Hugo Lourenço-Martins, Leonardo Scarabelli, Kenji Watanabe, Takashi Taniguchi, Marcel Tencé, Jean-Denis Blazit, Xiaoyan Li, Alexandre Gloter, Alberto Zobelli, Luis Líz-Marzan, F. Javier García de Abajo, Odile Stephan, Mathieu Kociak

Abstract: Vibrational optical spectroscopies can be enhanced by surface plasmons to reach molecular-sized limits of detection and characterization. The level of enhancement strongly depends on microscopic details of the sample that are generally missed by macroscopic techniques. Here we investigate phonons in h-BN by coupling them to silver-nanowire plasmons, whose energy is tuned by modifying the nanowire… ▽ More Vibrational optical spectroscopies can be enhanced by surface plasmons to reach molecular-sized limits of detection and characterization. The level of enhancement strongly depends on microscopic details of the sample that are generally missed by macroscopic techniques. Here we investigate phonons in h-BN by coupling them to silver-nanowire plasmons, whose energy is tuned by modifying the nanowire length. Specifically, we use electron beam milling to accurately and iteratively change the nanowire length, followed by electron energy-loss spectroscopy to reveal the plasmon-enhanced vibrational features of h-BN. This allows us to investigate otherwise hidden bulk phonons and observe strong plasmon-phonon coupling. The new milling-and-spectroscopy technique holds great potential for resolving vibrational features in material nanostructures. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Cubic BN optical gap and intragap optically active defects

Authors: Anna Tararan, Stefano di Sabatino, Matteo Gatti, Takashi Taniguchi, Kenji Watanabe, Lucia Reining, Luiz H. G. Tizei, Mathieu Kociak, Alberto Zobelli

Abstract: We report a comprehensive study on the optical properties of cubic boron nitride (c-BN) and its optically active defects. Using electron energy-loss spectroscopy (EELS) within a monochromated scanning transmission electron microscope (STEM) on the highest-quality crystals available, we demonstrate unequivocally that the optical-gap energy of c-BN slightly exceeds 10 eV. Further theoretical analysi… ▽ More We report a comprehensive study on the optical properties of cubic boron nitride (c-BN) and its optically active defects. Using electron energy-loss spectroscopy (EELS) within a monochromated scanning transmission electron microscope (STEM) on the highest-quality crystals available, we demonstrate unequivocally that the optical-gap energy of c-BN slightly exceeds 10 eV. Further theoretical analysis in the framework of the Bethe-Salpeter equation of many-body perturbation theory supports this result. The spatial localization of defect-related emissions has been investigated using nanometric resolved cathodoluminescence (nano-CL) in a STEM. By high-temperature annealing a c-BN powder, we have promoted phase transitions in nanometric domains which have been detected by the appearance of specific hexagonal-phase signatures in both EELS and CL spectra. A high number of intragap optically active centers are known in c-BN, but the literature is rather scattered and hence has been summarized here. For several emission lines we have obtained nano-CL maps which show emission spot sizes as small as few tens of nanometers. Finally, by coupling nano-CL to a Hanbury-Brown-Twiss intensity interferometer, we have addressed individual spots in order to identify the possible presence of single-photon sources. The observed CL bunching effect is compatible with a limited set of single-photon emitters and it permits obtaining emission lifetimes of the order of the nanosecond. △ Less

Submitted 29 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. B 98, 094106 (2018)

Revisiting Graphene Oxide Chemistry via Spatially-Resolved Electron Energy Loss Spectroscopy

Authors: Anna Tararan, Alberto Zobelli, Ana M. Benito, Wolfgang K. Maser, Odile Stéphan

Abstract: The type and distribution of oxygen functional groups in graphene oxide (GO) and reduced graphene oxide (RGO) remain still a subject of great debate. Local analytic techniques are required to access the chemistry of these materials at a nanometric scale. Electron energy loss spectroscopy in a scanning transmission electron microscope can provide the suitable resolution, but GO and RGO are extremel… ▽ More The type and distribution of oxygen functional groups in graphene oxide (GO) and reduced graphene oxide (RGO) remain still a subject of great debate. Local analytic techniques are required to access the chemistry of these materials at a nanometric scale. Electron energy loss spectroscopy in a scanning transmission electron microscope can provide the suitable resolution, but GO and RGO are extremely sensitive to electron irradiation. In this work we employ a dedicated experimental setup to reduce electron illumination below damage limit. GO oxygen maps obtained at a few nanometers scale show separated domains with different oxidation levels. The C/O ratio varies from about 4:1 to 1:1, the latter corresponding to a complete functionalization of the graphene flakes. In RGO the residual oxygen concentrates mostly in regions few tens nanometers wide. Specific energy-loss near-edge structures are observed for different oxidation levels. By combining these findings with first-principles simulations we propose a model for the highly oxidized domains where graphene is fully functionalized by hydroxyl groups forming a 2D-sp$^3$ carbon network analogous to that of graphane. △ Less

Submitted 12 December, 2016; originally announced December 2016.

Journal ref: Chem. Mater. 28, 3741 (2016)

Interplay between ferroic orders at the FeRh/BaTiO$_3$ interfaces

Authors: Viktoria V. Ivanovskaya, Alberto Zobelli, Alexandre Gloter, Manuel Bibes, Agnès Barthélémy

Abstract: It has been recently demonstrated that the magnetic state of FeRh can be controlled by electric fields in FeRh/BaTiO$_{\text{3}}$ heterostructures [R.O. Cherifi et al. Nature Mater. 13, 345 (2014)]. Voltage-controlled changes in the ferroelastic domain structure of BaTiO$_3$ appeared to drive this effect, with charge accumulation and depletion due to ferroelectricity playing a more elusive role. T… ▽ More It has been recently demonstrated that the magnetic state of FeRh can be controlled by electric fields in FeRh/BaTiO$_{\text{3}}$ heterostructures [R.O. Cherifi et al. Nature Mater. 13, 345 (2014)]. Voltage-controlled changes in the ferroelastic domain structure of BaTiO$_3$ appeared to drive this effect, with charge accumulation and depletion due to ferroelectricity playing a more elusive role. To make this electric-field control of magnetic order non-volatile, the contribution of ferroelectric field-effect must be further enhanced, which requires understanding the details of the interface between FeRh and BaTiO$_3$. Here we report on the atomic structure and electron screening at this interface through density functional theory simulations. We relate different screening capabilities for the antiferromagnetic and ferromagnetic states of FeRh to different density of states at the Fermi level of corresponding bulk structures. We predict that the stability of the ferroelectric state in adjacent very thin BaTiO$_3$ films will be affected by magnetic order in FeRh. This control of ferroelectricity by magnetism can be viewed as the reciprocal effect of the voltage-controlled magnetic order previously found for this system. △ Less

Submitted 17 December, 2014; originally announced December 2014.

Local electrical control of magnetic order and orientation by ferroelastic domain arrangements just above room temperature

Authors: L. C. Phillips, Ryan O. Cherifi, Viktoria Ivanovskaya, Alberto Zobelli, Ingrid C. Infante, Eric Jacquet, Nicolas Guiblin, Ahmet A. Unal, Florian Kronast, Brahim Dkhil, Agnes Barthelemy, Manuel Bibes, Sergio Valencia

Abstract: Ferroic materials (ferromagnetic, ferroelectric, ferroelastic) usually divide into domains with different orientations of their order parameter. Coupling different ferroic systems creates new functionalities, for instance the electrical control of macroscopic magnetic properties including magnetization and coercive field. Here we show that ferroelastic domains can be used to control both magnetic… ▽ More Ferroic materials (ferromagnetic, ferroelectric, ferroelastic) usually divide into domains with different orientations of their order parameter. Coupling different ferroic systems creates new functionalities, for instance the electrical control of macroscopic magnetic properties including magnetization and coercive field. Here we show that ferroelastic domains can be used to control both magnetic order and magnetization direction at the nanoscale with a voltage. We use element-specific x-ray imaging to map the magnetic domains as a function of temperature and voltage in epitaxial FeRh on ferroelastic BaTiO3. Exploiting the nanoscale phase-separation of FeRh, we locally interconvert between ferromagnetism and antiferromagnetism with a small electric field just above room temperature. Our results emphasize the importance of nanoscale ferroic domain structure to achieve enhanced coupling in artificial multiferroics. △ Less

Submitted 11 December, 2014; originally announced December 2014.

Evidence for anisotropic dielectric properties of monoclinic hafnia using high-resolution TEM valence electron energy-loss spectroscopy and ab initio time-dependent density-functional theory

Authors: Cyril Guedj, Linda Hung, Alberto Zobelli, Philippe Blaise, Francesco Sottile, Valerio Olevano

Abstract: The effect of nanocrystal orientation on the energy loss spectra of monoclinic hafnia (m-HfO$_2$) is measured by high resolution transmission electron microscopy (HRTEM) and valence energy loss spectroscopy (VEELS) on high quality samples. For the same momentum-transfer directions, the dielectric properties are also calculated ab initio by time-dependent density-functional theory (TDDFT). Experime… ▽ More The effect of nanocrystal orientation on the energy loss spectra of monoclinic hafnia (m-HfO$_2$) is measured by high resolution transmission electron microscopy (HRTEM) and valence energy loss spectroscopy (VEELS) on high quality samples. For the same momentum-transfer directions, the dielectric properties are also calculated ab initio by time-dependent density-functional theory (TDDFT). Experiments and simulations evidence anisotropy in the dielectric properties of m-HfO$_2$, most notably with the direction-dependent oscillator strength of the main bulk plasmon. The anisotropic nature of m-HfO$_2$ may contribute to the differences among VEELS spectra reported in literature. The good agreement between the complex dielectric permittivity extracted from VEELS with nanometer spatial resolution, TDDFT modeling, and past literature demonstrates that the present HRTEM-VEELS device-oriented methodology is a possible solution to the difficult nanocharacterization challenges given in the International Technology Roadmap for Semiconductors. △ Less

Submitted 13 October, 2014; originally announced October 2014.

Comments: 5 pages, 3 figures

Journal ref: Appl. Phys. Lett. 105, 222904 (2014)

Direct evidence of tungsten clustering in W$_{\text{0.02}}$V$_{\text{0.98}}$O$_{\text{2}}$ thin films and its effect on the metal-to-insulator transition

Authors: Xiaoyan Li, Alexandre Gloter, Alberto Zobelli, Hui Gu, Xun Cao, ** **, Christian Colliex

Abstract: Substitutional tungsten do** of VO$_{\text{2}}$ thin films and its effect on the metal-to-insulator transition are investigated by means of X-ray diffraction, Cs-corrected scanning transmission electron microscope (STEM) and ab-initio simulations. The W$_{\text{0.02}}$V$_{\text{0.98}}$O$_{\text{2}}$ thin films deposited on (001) sapphire are studied in both planar and transverse geometries. The… ▽ More Substitutional tungsten do** of VO$_{\text{2}}$ thin films and its effect on the metal-to-insulator transition are investigated by means of X-ray diffraction, Cs-corrected scanning transmission electron microscope (STEM) and ab-initio simulations. The W$_{\text{0.02}}$V$_{\text{0.98}}$O$_{\text{2}}$ thin films deposited on (001) sapphire are studied in both planar and transverse geometries. The tungsten atoms are distinguishable from the V atoms in the Z-sensitive high angle annular dark field (HAADF) STEM image and their nature is further confirmed by electron energy loss spectroscopy (EELS). The W dopants are found to substitute in the V sites and form local clusters at first neighbour, preferentially along the <010>$_{\text{R}}$ directions. Ab-initio modeling for this 2 at.% W doped VO$_{\text{2}}$ confirms the experimentally found W clustering mechanism to be the most stable substitutional configuration and it demonstrates that the binding energy of such cluster is 0.18 eV. Driving forces for short range ordering are also obtained along the <011>$_{\text{R}}$ and <110>$_{\text{R}}$ directions. Strong energetic penalty is found for the <001>$_{\text{R}}$ direction. Simulations indicate that the clustering helps in stabilizing the tetragonal structure, while a diluted W dopant induces more structural distortion and V-V pairing.This suggests that the clustering mechanism plays a critical role in the transition temperature evolution with the W dopants. △ Less

Submitted 13 April, 2014; originally announced April 2014.

Journal ref: Acta Materialia 80, 16 (2014)

Excitons and stacking order in h-BN

Authors: Romain Bourrellier, Michele Amato, Luiz Henrique Galvão Tizei, Christine Giorgetti, Alexandre Gloter, Malcolm I. Heggie, Katia March, Odile Stéphan, Lucia Reining, Mathieu Kociak, Alberto Zobelli

Abstract: The strong excitonic emission at 5.75 eV of hexagonal boron nitride (h-BN) makes this material one of the most promising candidate for light emitting devices in the far ultraviolet (UV). However, single excitons occur only in perfect monocrystals that are extremely hard to synthesize, while regular h-BN samples present a complex emission spectrum with several additional peaks. The microscopic orig… ▽ More The strong excitonic emission at 5.75 eV of hexagonal boron nitride (h-BN) makes this material one of the most promising candidate for light emitting devices in the far ultraviolet (UV). However, single excitons occur only in perfect monocrystals that are extremely hard to synthesize, while regular h-BN samples present a complex emission spectrum with several additional peaks. The microscopic origin of these additional emissions has not yet been understood. In this work we address this problem using an experimental and theoretical approach that combines nanometric resolved cathodoluminescence, high resolution transmission electron microscopy and state of the art theoretical spectroscopy methods. We demonstrate that emission spectra are strongly inhomogeneus within individual flakes and that additional excitons occur at structural deformations, such as faceted plane folds, that lead to local changes of the h-BN stacking order. △ Less

Submitted 9 January, 2014; originally announced January 2014.

Journal ref: ACS Photonics 1, 857 (2014)

Graphene edge structures: Folding, scrolling, tubing, rippling and twisting

Authors: Viktoria V. Ivanovskaya, Philipp Wagner, Alberto Zobelli, Irene Suarez-Martinez, Abu Yaya, Christopher P. Ewels

Abstract: Conventional three-dimensional crystal lattices are terminated by surfaces, which can demonstrate complex rebonding and rehybridisation, localised strain and dislocation formation. Two dimensional crystal lattices, of which graphene is the archetype, are terminated by lines. The additional available dimension at such interfaces opens up a range of new topological interface possibilities. We show t… ▽ More Conventional three-dimensional crystal lattices are terminated by surfaces, which can demonstrate complex rebonding and rehybridisation, localised strain and dislocation formation. Two dimensional crystal lattices, of which graphene is the archetype, are terminated by lines. The additional available dimension at such interfaces opens up a range of new topological interface possibilities. We show that graphene sheet edges can adopt a range of topological distortions depending on their nature. Rehybridisation, local bond reordering, chemical functionalisation with bulky, charged, or multi-functional groups can lead to edge buckling to relieve strain, folding, rolling and even tube formation. We discuss the topological possibilities at a 2D graphene edge, and under what circumstances we expect different edge topologies to occur. Density functional calculations are used to explore in more depth different graphene edge types. △ Less

Submitted 20 July, 2012; originally announced July 2012.

Comments: Additional figure in published version

Journal ref: Carbon Nanostructures, 2012, GraphITA 2011, p. 75-85

A comparative study of density functional and density functional tight binding calculations of defects in graphene

Authors: Alberto Zobelli, Viktoria V. Ivanovskaya, Philipp Wagner, Irene Suarez-Martinez, Abu Yaya, Chris P. Ewels

Abstract: The density functional tight binding approach (DFTB) is well adapted for the study of point and line defects in graphene based systems. After briefly reviewing the use of DFTB in this area, we present a comparative study of defect structures, energies and dynamics between DFTB results obtained using the dftb+ code, and density functional results using the localised Gaussian orbital code, AIMPRO. D… ▽ More The density functional tight binding approach (DFTB) is well adapted for the study of point and line defects in graphene based systems. After briefly reviewing the use of DFTB in this area, we present a comparative study of defect structures, energies and dynamics between DFTB results obtained using the dftb+ code, and density functional results using the localised Gaussian orbital code, AIMPRO. DFTB accurately reproduces structures and energies for a range of point defect structures such as vacancies and Stone-Wales defects in graphene, as well as various unfunctionalised and hydroxylated graphene sheet edges. Migration barriers for the vacancy and Stone-Wales defect formation barriers are accurately reproduced using a nudged elastic band approach. Finally we explore the potential for dynamic defect simulations using DFTB, taking as an example electron irradiation damage in graphene. △ Less

Submitted 13 July, 2012; originally announced July 2012.

Journal ref: Phys. Status Solidi B 249, 276 (2012)

Low energy graphene edge termination via small diameter nanotube formation

Authors: Viktoria V. Ivanovskaya, Alberto Zobelli, Philipp Wagner, Malcolm I. Heggie, Patrick R. Briddon, Mark J. Rayson, Chris P. Ewels

Abstract: We demonstrate that free graphene sheet edges can curl back on themselves,reconstructing as nanotubes. This results in lower formation energies than any other non-functionalised edge structure reported to date in the literature. We determine the critical tube size and formation barrier and compare with density functional simulations of other edge terminations including a new reconstructed Klein ed… ▽ More We demonstrate that free graphene sheet edges can curl back on themselves,reconstructing as nanotubes. This results in lower formation energies than any other non-functionalised edge structure reported to date in the literature. We determine the critical tube size and formation barrier and compare with density functional simulations of other edge terminations including a new reconstructed Klein edge. Simulated high resolution electron microscopy images show why such rolled edges may be difficult to detect. Rolled zigzag edges serve as metallic conduction channels, separated from the neighbouring bulk graphene by a chain of insulating sp$^3$-carbon atoms, and introduce Van Hove singularities into the graphene density of states. △ Less

Submitted 4 July, 2011; originally announced July 2011.

Comments: To appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 107, 065502 (2011)

BN domains included into carbon nanotubes: role of interface

Authors: Viktoriya V. Ivanovskaya, Alberto Zobelli, Odile Stephan, Patrick R. Briddon, Christian Colliex

Abstract: We present a density functional theory study on the shape and arrangement of small BN domains embedded into single-walled carbon nanotubes. We show a strong tendency for the BN hexagons formation at the simultaneous inclusion of B and N atoms within the walls of carbon nanotubes. The work emphasizes the importance of a correct description of the BN-C frontier. We suggest that BN-C interface will… ▽ More We present a density functional theory study on the shape and arrangement of small BN domains embedded into single-walled carbon nanotubes. We show a strong tendency for the BN hexagons formation at the simultaneous inclusion of B and N atoms within the walls of carbon nanotubes. The work emphasizes the importance of a correct description of the BN-C frontier. We suggest that BN-C interface will be formed preferentially with the participation of N-C bonds. Thus, we propose a new way of stabilizing the small BN inclusions through the formation of nitrogen terminated borders. The comparison between the obtained results and the available experimental data on formation of BN plackets within the single walled carbon nanotubes is presented. The mirror situation of inclusion of carbon plackets within single walled BN nanotubes is considered within the proposed formalism. Finally, we show that the inclusion of small BN plackets inside the CNTs strongly affects the electronic character of the initial systems, opening a band gap. The nitrogen excess in the BN plackets introduces donor states in the band gap and it might thus result in a promising way for n-do** single walled carbon nanotubes. △ Less

Submitted 9 July, 2009; originally announced July 2009.

Journal ref: J. Phys. Chem. C 113, 16603 (2009)

Ab initio study of bilateral do** within the MoS2-NbS2 system

Authors: Viktoriya V. Ivanovskaya, Alberto Zobelli, Alexandre Gloter, Nathalie Brun, Virginie Serin, Christian Colliex

Abstract: We present a systematic study on the stability and the structural and electronic properties of mixed molybdenum-niobium disulphides. Using density functional theory we investigate bilateral do** with up to 25 % of MoS2 (NbS2) by Nb (Mo) atoms, focusing on the precise arrangement of dopants within the host lattices. We find that over the whole range of considered concentrations, Nb do** of Mo… ▽ More We present a systematic study on the stability and the structural and electronic properties of mixed molybdenum-niobium disulphides. Using density functional theory we investigate bilateral do** with up to 25 % of MoS2 (NbS2) by Nb (Mo) atoms, focusing on the precise arrangement of dopants within the host lattices. We find that over the whole range of considered concentrations, Nb do** of MoS2 occurs through a substitutional mechanism. For Mo in NbS2 both interstitial and substitutional do** can co-exist, depending upon the particular synthesis conditions. The analysis of the structural and electronic modifications of the perfect bulk systems due to the do** is presented. We show that substitutional Nb atoms introduce electron holes to the MoS2, leading to a semiconductor-metal transition. On the other hand, the Mo do** of Nb2, does not alter the metallic behavior of the initial system. The results of the present study are compared with available experimental data on mixed MoS2-NbS2 (bulk and nanoparticles). △ Less

Submitted 9 June, 2008; originally announced June 2008.

Comments: 7 pages, 6 figures

Journal ref: Phys. Rev. B 78, 134104 (2008)

Sha** single walled nanotubes

Authors: Alberto Zobelli, Alexandre Gloter, Chris P. Ewels, Christian Colliex

Abstract: We show that electron irradiation in a dedicated scanning transmission microscope can be used as a nano-electron-lithography technique allowing the controlled resha** of single walled carbon and boron nitride nanotubes. The required irradiation conditions have been optimised on the basis of total knock-on cross sections calculated within density functional based methods. It is then possible to… ▽ More We show that electron irradiation in a dedicated scanning transmission microscope can be used as a nano-electron-lithography technique allowing the controlled resha** of single walled carbon and boron nitride nanotubes. The required irradiation conditions have been optimised on the basis of total knock-on cross sections calculated within density functional based methods. It is then possible to induce morphological modifications, such as a change of the tube chirality, by removing severals tens of atoms with a nanometrical spatial resolution. These irradiation techniques could open new opportunities for nano-engeneering a large variety of nanostructured materials. △ Less

Submitted 6 September, 2007; originally announced September 2007.

Comments: article + supporting materials

Journal ref: Phys. Rev. B 77, 045410 (2008)