-
Detecting Infrared Single Photons with Near-Unity System Detection Efficiency
Authors:
** Chang,
Johannes W. N. Los,
Jaime Oscar Tenorio-Pearl,
Niels Noordzij,
Ronan Gourgues,
Antonio Guardiani,
Julien R. Zichi,
Silvania F. Pereira,
H. Paul Urbach,
Val Zwiller,
Sander N. Dorenbos,
Iman Esmaeil Zadeh
Abstract:
Single photon detectors are indispensable tools in optics, from fundamental measurements to quantum information processing. The ability of superconducting nanowire single photon detectors to detect single photons with unprecedented efficiency, short dead time and high time resolution over a large frequency range enabled major advances in quantum optics. However, combining near-unity system detecti…
▽ More
Single photon detectors are indispensable tools in optics, from fundamental measurements to quantum information processing. The ability of superconducting nanowire single photon detectors to detect single photons with unprecedented efficiency, short dead time and high time resolution over a large frequency range enabled major advances in quantum optics. However, combining near-unity system detection efficiency with high timing performance remains an outstanding challenge. In this work, we show novel superconducting nanowire single photon detectors fabricated on membranes with 94-99.5 (plus minus 2.07%) system detection efficiency in the wavelength range 1280-1500 nm. The SiO2/Au membrane enables broadband absorption in small SNSPDs, offering high detection efficiency in combination with high timing performance. With low noise cryogenic amplifiers operated in the same cryostat, our efficient detectors reach timing jitter in the range of 15-26 ps. We discuss the prime challenges in optical design, device fabrication as well as accurate and reliable detection efficiency measurements to achieve high performance single-photon detection. As a result, the fast-develo** fields of quantum information science, quantum metrology, infrared imaging and quantum networks will greatly benefit from this far-reaching quantum detection technology.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Reconfigurable quantum photonics with on-chip detectors
Authors:
Samuel Gyger,
Julien Zichi,
Lucas Schweickert,
Ali W. Elshaari,
Stephan Steinhauer,
Saimon F. Covre da Silva,
Armando Rastelli,
Val Zwiller,
Klaus D. Jöns,
Carlos Errando-Herranz
Abstract:
Integrated quantum photonics offers a promising path to scale up quantum optics experiments by miniaturizing and stabilizing complex laboratory setups. Central elements of quantum integrated photonics are quantum emitters, memories, detectors, and reconfigurable photonic circuits. In particular, integrated detectors not only offer optical readout but, when interfaced with reconfigurable circuits,…
▽ More
Integrated quantum photonics offers a promising path to scale up quantum optics experiments by miniaturizing and stabilizing complex laboratory setups. Central elements of quantum integrated photonics are quantum emitters, memories, detectors, and reconfigurable photonic circuits. In particular, integrated detectors not only offer optical readout but, when interfaced with reconfigurable circuits, allow feedback and adaptive control, crucial for deterministic quantum teleportation, training of neural networks, and stabilization of complex circuits. However, the heat generated by thermally reconfigurable photonics is incompatible with heat-sensitive superconducting single-photon detectors, and thus their on-chip co-integration remains elusive. Here we show low-power microelectromechanical reconfiguration of integrated photonic circuits interfaced with superconducting single-photon detectors on the same chip. We demonstrate three key functionalities for photonic quantum technologies: 28 dB high-extinction routing of classical and quantum light, 90 dB high-dynamic range single-photon detection, and stabilization of optical excitation over 12 dB power variation. Our platform enables heat-load free reconfigurable linear optics and adaptive control, critical for quantum state preparation and quantum logic in large-scale quantum photonics applications.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
A platform for high performance photon correlation measurements
Authors:
Iman Esmaeil Zadeh,
Johannes W. N. Los,
Ronan B. M. Gourgues,
** Chang,
Ali W. Elshaari,
Julien Zichi,
Yuri J. van Staaden,
Jeroen Swens,
Nima Kalhor,
Antonio Guardiani,
Yun Meng,
Kai Zou,
Sergiy Dobrovolskiy,
Andreas W. Fognini,
Dennis R. Schaart,
Dan Dalacu,
Philip J. Poole,
Michael E. Reimer,
Xiaolong Hu,
Silvania F. Pereira,
Val Zwiller,
Sander N. Dorenbos
Abstract:
A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8-11\,nm) and improving the pattern fidelity of the nano-structure of the superconducting nanowire single-photon detectors (SNSPD),…
▽ More
A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8-11\,nm) and improving the pattern fidelity of the nano-structure of the superconducting nanowire single-photon detectors (SNSPD), we fabricated devices demonstrating superior performance over all previously reported detectors in the combination of efficiency and time resolution. Our findings prove that small variations in the nanowire width, in the order of a few nanometers, can lead to a significant penalty on their temporal response. Addressing these issues, we consistently achieved high time resolution (best device 7.7\,ps, other devices $\sim$10-16\,ps) simultaneously with high system detection efficiencies ($80-90\%$) in the wavelength range of 780-1000\,nm, as well as in the telecom bands (1310-1550\,nm). The use of thicker films allowed us to fabricate large-area multi-pixel devices with homogeneous pixel performance. We first fabricated and characterized a $100\times100\, μm^2$ 16-pixel detector and showed there was little variation among individual pixels. Additionally, to showcase the power of our platform, we fabricated and characterized 4-pixel multimode fiber-coupled detectors and carried out photon correlation experiments on a nanowire quantum dot resulting in $g^2(0)$ values lower than 0.04. The multi-pixel detectors alleviate the need for beamsplitters and can be used for higher order correlations with promising prospects not only in the field of quantum optics, but also in bio-imaging applications, such as fluorescence microscopy and positron emission tomography.
△ Less
Submitted 22 March, 2020;
originally announced March 2020.
-
Multimode Fiber Coupled Superconducting Nanowire Single Photon Detectors with High Detection Efficiency and Time Resolution
Authors:
** Chang,
Iman Esmaeilzadeh,
Johannes W. N. Los,
Julien Zichi,
Andreas Fognini,
Monique Gevers,
Sander Dorenbos,
Silvania F. Pereira,
Paul Urbach,
Val Zwiller
Abstract:
In the past decade superconducting nanowire single photon detectors (SNSPDs) have gradually become an indispensable part of any demanding quantum optics experiment. Until now, most SNSPDs are coupled to single-mode fibers. SNSPDs coupled to multimode fibers have shown promising efficiencies but are yet to achieve high time resolution. For a number of applications ranging from quantum nano-photonic…
▽ More
In the past decade superconducting nanowire single photon detectors (SNSPDs) have gradually become an indispensable part of any demanding quantum optics experiment. Until now, most SNSPDs are coupled to single-mode fibers. SNSPDs coupled to multimode fibers have shown promising efficiencies but are yet to achieve high time resolution. For a number of applications ranging from quantum nano-photonics to bio-optics, high efficiency and high time-resolution are desired at the same time. In this paper, we demonstrate the role of polarization on the efficiency of multi-mode fiber coupled detectors, and show how it can be addressed. We fabricated high performance 20, 25 and 50μm diameter detectors targeted for visible, near infrared, and telecom wavelengths. A custom-built setup was used to simulate realistic experiments with randomized modes in the fiber. We simultaneously achieved system efficiency >80% and time resolution <20 ps and made large detectors that offer outstanding performances.
△ Less
Submitted 16 August, 2019;
originally announced August 2019.
-
Passively stable distribution of polarisation entanglement over 192 km of deployed optical fibre
Authors:
Sören Wengerowsky,
Siddarth Koduru Joshi,
Fabian Steinlechner,
Julien R. Zichi,
Bo Liu,
Thomas Scheidl,
Sergiy M. Dobrovolskiy,
René van der Molen,
Johannes W. N. Los,
Val Zwiller,
Marijn A. M. Versteegh,
Alberto Mura,
Davide Calonico,
Massimo Inguscio,
Anton Zeilinger,
André Xuereb,
Rupert Ursin
Abstract:
Quantum key distribution (QKD) based on entangled photon pairs holds the potential for repeater-based quantum networks connecting clients over long distance. We demonstrate long-distance entanglement distribution by means of polarisation-entangled photon pairs through two successive deployed 96 km-long telecommunications fibres in the same submarine cable. One photon of each pair was detected dire…
▽ More
Quantum key distribution (QKD) based on entangled photon pairs holds the potential for repeater-based quantum networks connecting clients over long distance. We demonstrate long-distance entanglement distribution by means of polarisation-entangled photon pairs through two successive deployed 96 km-long telecommunications fibres in the same submarine cable. One photon of each pair was detected directly after the source, while the other travelled the fibre cable in both directions for a total distance of 192 km and attenuation of 48 dB. The observed two-photon Bell state exhibited a fidelity 85% $\pm$ 2% and was stable over several hours. We employed neither active stabilisation of the quantum state nor chromatic dispersion compensation for the fibre.
△ Less
Submitted 10 July, 2019;
originally announced July 2019.
-
High performance superconducting nanowire single photon detectors operating at temperature from 4 to 7 K
Authors:
Ronan Gourgues,
Johannes W. N. Los,
Julien Zichi,
** Chang,
Nima Kalhor,
Gabriele Bulgarini,
Sander N. Dorenbos,
Val Zwiller,
Iman Esmaeil Zadeh
Abstract:
We experimentally investigate the performance of NbTiN superconducting nanowire single photon detectors above the base temperature of a conventional Gifford-McMahon cryocooler (2.5 K). By tailoring design and thickness (8 - 13 nm) of the detectors, high performance, high operating temperature, single-photon detection from the visible to telecom wavelengths are demonstrated. At 4.3 K, a detection e…
▽ More
We experimentally investigate the performance of NbTiN superconducting nanowire single photon detectors above the base temperature of a conventional Gifford-McMahon cryocooler (2.5 K). By tailoring design and thickness (8 - 13 nm) of the detectors, high performance, high operating temperature, single-photon detection from the visible to telecom wavelengths are demonstrated. At 4.3 K, a detection efficiency of 82 % at 785 nm wavelength and a timing jitter of 30 $\pm$ 0.3 ps are achieved. In addition, for 1550 nm and similar operating temperature we measured a detection efficiency as high as 64 %. Finally, we show that at temperatures up to 7 K, unity internal efficiency is maintained for the visible spectrum. Our work is particularly important to allow for the large scale implementation of superconducting single photon detectors in combination with heat sources such as free-space optical windows, cryogenic electronics, microwave sources and active optical components for complex quantum optical experiments and bio-imaging.
△ Less
Submitted 21 June, 2019;
originally announced June 2019.
-
Nb$_x$Ti$_{1-x}$N low timing jitter single-photon detectors with unity internal efficiency at 1550 nm and 2.5 K
Authors:
Julien Zichi,
** Chang,
Stephan Steinhauer,
Kristina von Fieandt,
Johannes W. N. Los,
Gijs Visser,
Nima Kalhor,
Thomas Lettner,
Ali. W. Elshaari,
Iman Esmaeil Zadeh,
Val Zwiller
Abstract:
The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly…
▽ More
The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly at temperatures above 0.8 K. Devices made from niobium nitride and niobium titanium nitride allow to reach the best timing jitter, but in turn have stronger requirements in terms of film quality to achieve a high efficiency. Here we take advantage of the flexibility of reactive co-sputter deposition to tailor the composition of NbxTi1-xN superconducting films, and show that a Nb fraction of x = 0.62 allows for the fabrication of detectors from films as thick as 9 nm and covering an active area of 20 μm, with a wide detection saturation plateau at telecom wavelengths and in particular at 1550 nm. This is a signature of an internal detection efficiency saturation, achieved while maintaining the high time resolution associated with NbTiN and operation at 2.5K. With our optimized recipe, we reliably fabricated detectors with high critical current densities reaching a saturation plateau at 1550 nm with 80% system detection efficiency, and with a FWHM timing jitter as low as 19.47 ps.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Controlled integration of selected detectors and emitters in photonic integrated circuits
Authors:
Ronan Gourgues,
Iman Esmaeil Zadeh,
Ali W. Elshaari,
Gabriele Bulgarini,
Johannes W. N. Los,
Julien Zichi,
Dan Dalacu,
Philip J. Poole,
Sander N. Dorenbos,
Val Zwiller
Abstract:
Integration of superconducting nanowire single photon detectors and quantum sources with photonic waveguides is crucial for realizing advanced quantum integrated circuits. However, scalability is hindered by stringent requirements on high performance detectors. Here we overcome the yield limitation by controlled coupling of photonic channels to pre-selected detectors based on measuring critical cu…
▽ More
Integration of superconducting nanowire single photon detectors and quantum sources with photonic waveguides is crucial for realizing advanced quantum integrated circuits. However, scalability is hindered by stringent requirements on high performance detectors. Here we overcome the yield limitation by controlled coupling of photonic channels to pre-selected detectors based on measuring critical current, timing resolution, and detection efficiency. As a proof of concept of our approach, we demonstrate a hybrid on-chip full-transceiver consisting of a deterministically integrated detector coupled to a selected nanowire quantum dot through a filtering circuit made of a silicon nitride waveguide and a ring resonator filter, delivering 100 dB suppression of the excitation laser. In addition, we perform extensive testing of the detectors before and after integration in the photonic circuit and show that the high performance of the superconducting nanowire detectors, including timing jitter down to 23 $\pm$ 3 ps, is maintained. Our approach is fully compatible with wafer level automated testing in a cleanroom environment.
△ Less
Submitted 16 November, 2018; v1 submitted 30 October, 2018;
originally announced November 2018.
-
Improvement of the critical temperature of NbTiN films on III-nitride substrates
Authors:
Houssaine Machhadani,
Julien Zichi,
Catherine Bougerol,
Stéphane Lequien,
Jean-Luc Thomassin,
Nicolas Mollard,
Anna Mukhtarova,
Val Zwiller,
Jean-Michel Gérard,
Eva Monroy
Abstract:
In this paper, we study the impact of using III-nitride semiconductors (GaN, AlN) as substrates for ultrathin (11 nm) superconducting films of NbTiN deposited by reactive magnetron sputtering. The resulting NbTiN layers are (111)-oriented, fully relaxed, and they keep an epitaxial relation with the substrate. The higher critical superconducting temperature (Tc = 11.8 K) was obtained on AlN-on-sapp…
▽ More
In this paper, we study the impact of using III-nitride semiconductors (GaN, AlN) as substrates for ultrathin (11 nm) superconducting films of NbTiN deposited by reactive magnetron sputtering. The resulting NbTiN layers are (111)-oriented, fully relaxed, and they keep an epitaxial relation with the substrate. The higher critical superconducting temperature (Tc = 11.8 K) was obtained on AlN-on-sapphire, which was the substrate with smaller lattice mismatch with NbTiN. We attribute this improvement to a reduction of the NbTiN roughness, which appears associated to the relaxation of the lattice misfit with the substrate. On AlN-on-sapphire, superconducting nanowire single photon detectors (SNSPDs) were fabricated and tested, obtaining external quantum efficiencies that are in excellent agreement with theoretical calculations.
△ Less
Submitted 5 December, 2018; v1 submitted 9 October, 2018;
originally announced October 2018.
-
In-field entanglement distribution over a 96 km-long submarine optical fibre
Authors:
Sören Wengerowsky,
Siddarth Koduru Joshi,
Fabian Steinlechner,
Julien R. Zichi,
Sergiy. M. Dobrovolskiy,
René van der Molen,
Johannes W. N. Los,
Val Zwiller,
Marijn A. M. Versteegh,
Alberto Mura,
Davide Calonico,
Massimo Inguscio,
Hannes Hübel,
Anton Zeilinger,
André Xuereb,
Rupert Ursin
Abstract:
Techniques for the distribution of quantum-secured cryptographic keys have reached a level of maturity allowing them to be implemented in all kinds of environments, away from any form of laboratory infrastructure. Here, we detail the distribution of entanglement between Malta and Sicily over a 96 km-long submarine telecommunications optical fibre cable. We used this standard telecommunications fib…
▽ More
Techniques for the distribution of quantum-secured cryptographic keys have reached a level of maturity allowing them to be implemented in all kinds of environments, away from any form of laboratory infrastructure. Here, we detail the distribution of entanglement between Malta and Sicily over a 96 km-long submarine telecommunications optical fibre cable. We used this standard telecommunications fibre as a quantum channel to distribute polarisation-entangled photons and were able to observe around 257 photon pairs per second, with a polarisation visibility above 90%. Our experiment demonstrates the feasibility of using deployed submarine telecommunications optical fibres as long-distance quantum channels for polarisation-entangled photons. This opens up a plethora of possibilities for future experiments and technological applications using existing infrastructure.
△ Less
Submitted 1 March, 2018;
originally announced March 2018.
-
A stable wavelength-tunable triggered source of single photons and cascaded photon pairs at the telecom C-band
Authors:
Katharina D. Zeuner,
Matthias Paul,
Thomas Lettner,
Carl Reuterskiöld Hedlund,
Lucas Schweickert,
Stephan Steinhauer,
Lily Yang,
Julien Zichi,
Mattias Hammar,
Klaus D. Jöns,
Val Zwiller
Abstract:
The implementation of fiber-based long-range quantum communication requires tunable sources of single photons at the telecom C-band. Stable and easy-to-implement wavelength- tunability of individual sources is crucial to (i) bring remote sources into resonance, to (ii) define a wavelength standard and to (iii) ensure scalability to operate a quantum repeater. So far, the most promising sources for…
▽ More
The implementation of fiber-based long-range quantum communication requires tunable sources of single photons at the telecom C-band. Stable and easy-to-implement wavelength- tunability of individual sources is crucial to (i) bring remote sources into resonance, to (ii) define a wavelength standard and to (iii) ensure scalability to operate a quantum repeater. So far, the most promising sources for true, telecom single photons are semiconductor quantum dots, due to their ability to deterministically and reliably emit single and entangled photons. However, the required wavelength-tunability is hard to attain. Here, we show a stable wavelength-tunable quantum light source by integrating strain-released InAs quantum dots on piezoelectric substrates. We present triggered single-photon emission at 1.55 μm with a multiphoton emission probability as low as 0.097, as well as photon pair emission from the radiative biexciton-exciton cascade. We achieve a tuning range of 0.25 nm which will allow to spectrally overlap remote quantum dots or tuning distant quantum dots into resonance with quantum memories. This opens up realistic avenues for the implementation of photonic quantum information processing applications at telecom wavelengths.
△ Less
Submitted 4 January, 2018;
originally announced January 2018.
-
On-demand generation of background--free single photons from a solid-state source
Authors:
Lucas Schweickert,
Klaus D. Jöns,
Katharina D. Zeuner,
Saimon Filipe Covre da Silva,
Huiying Huang,
Thomas Lettner,
Marcus Reindl,
Julien Zichi,
Rinaldo Trotta,
Armando Rastelli,
Val Zwiller
Abstract:
True on--demand high--repetition--rate single--photon sources are highly sought after for quantum information processing applications. However, any coherently driven two-level quantum system suffers from a finite re-excitation probability under pulsed excitation, causing undesirable multi--photon emission. Here, we present a solid--state source of on--demand single photons yielding a raw second--o…
▽ More
True on--demand high--repetition--rate single--photon sources are highly sought after for quantum information processing applications. However, any coherently driven two-level quantum system suffers from a finite re-excitation probability under pulsed excitation, causing undesirable multi--photon emission. Here, we present a solid--state source of on--demand single photons yielding a raw second--order coherence of $g^{(2)}(0)=(7.5\pm1.6)\times10^{-5}$ without any background subtraction nor data processing. To this date, this is the lowest value of $g^{(2)}(0)$ reported for any single--photon source even compared to the previously best background subtracted values. We achieve this result on GaAs/AlGaAs quantum dots embedded in a low--Q planar cavity by employing (i) a two--photon excitation process and (ii) a filtering and detection setup featuring two superconducting single--photon detectors with ultralow dark-count rates of $(0.0056\pm0.0007) s^{-1}$ and $(0.017\pm0.001) s^{-1}$, respectively. Re--excitation processes are dramatically suppressed by (i), while (ii) removes false coincidences resulting in a negligibly low noise floor.
△ Less
Submitted 15 October, 2018; v1 submitted 19 December, 2017;
originally announced December 2017.
