-
Numerical Simulation of Coronal Waves interacting with Coronal Holes: I. Basic Features
Authors:
Isabell Piantschitsch,
Bojan Vrsnak,
Arnold Hanslmeier,
Birgit Lemmerer,
Astrid Veronig,
Aaron Hernandez-Perez,
Jasa Calogovic,
Tomislav Zic
Abstract:
We developed a new numerical code that is able to perform 2.5D simulations of a magnetohydrodynamic (MHD) wave propagation in the corona, and its interaction with a low density region, such as a coronal hole (CH). We show that the impact of the wave on the CH leads to different effects, such as reflection and transmission of the incoming wave, stationary features at the CH boundary, or formation o…
▽ More
We developed a new numerical code that is able to perform 2.5D simulations of a magnetohydrodynamic (MHD) wave propagation in the corona, and its interaction with a low density region, such as a coronal hole (CH). We show that the impact of the wave on the CH leads to different effects, such as reflection and transmission of the incoming wave, stationary features at the CH boundary, or formation of a density depletion. We present a comprehensive analysis of the morphology and kinematics of primary and secondary waves, that is, we describe in detail the temporal evolution of density, magnetic field, plasma flow velocity, phase speed and position of the wave amplitude. Effects like reflection, refraction and transmission of the wave strongly support the theory that large scale disturbances in the corona are fast MHD waves and build the major distinction to the competing pseudo-wave theory. The formation of stationary bright fronts was one of the main reasons for the development of pseudo-waves. Here we show that stationary bright fronts can be produced by the interactions of an MHD wave with a CH. We find secondary waves that are traversing through the CH and we show that one part of these traversing waves leaves the CH again, while another part is being reflected at the CH boundary inside the CH. We observe a density depletion that is moving in the opposite direction of the primary wave propagation. We show that the primary wave pushes the CH boundary to the right, caused by the wave front exerting dynamic pressure on the CH.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Understanding the Physical Nature of Coronal "EIT Waves"
Authors:
David M. Long,
D. Shaun Bloomfield,
Peng-Fei Chen,
Cooper Downs,
Peter T. Gallagher,
Ryun Young Kwon,
Kamalam Vanninathan,
Astrid M. Veronig,
Angelos Vourlidas,
Bojan Vrsnak,
Alexander Warmuth,
Tomislav Zic
Abstract:
For almost 20 years the physical nature of globally propagating waves in the solar corona (commonly called "EIT waves") has been controversial and subject to debate. Additional theories have been proposed over the years to explain observations that did not fit with the originally proposed fast-mode wave interpretation. However, the incompatibility of observations made using the Extreme-ultraviolet…
▽ More
For almost 20 years the physical nature of globally propagating waves in the solar corona (commonly called "EIT waves") has been controversial and subject to debate. Additional theories have been proposed over the years to explain observations that did not fit with the originally proposed fast-mode wave interpretation. However, the incompatibility of observations made using the Extreme-ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory with the fast-mode wave interpretation was challenged by differing viewpoints from the twin Solar Terrestrial Relations Observatory spacecraft and higher spatial/temporal resolution data from the Solar Dynamics Observatory. In this article, we reexamine the theories proposed to explain "EIT waves" to identify measurable properties and behaviours that can be compared to current and future observations. Most of us conclude that "EIT waves" are best described as fast-mode large-amplitude waves/shocks that are initially driven by the impulsive expansion of an erupting coronal mass ejection in the low corona.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
On the Propagation of a Geoeffective Coronal Mass Ejection during March 15 -- 17, 2015
Authors:
Yuming Wang,
Quanhao Zhang,
Jiajia Liu,
Chenglong Shen,
Fang Shen,
Zicai Yang,
T. Zic,
B. Vrsnak,
D. F. Webb,
Rui Liu,
S. Wang,
Jie Zhang,
Qiang Hu,
Bin Zhuang
Abstract:
The largest geomagnetic storm so far in the solar cycle 24 was produced by a fast coronal mass ejection (CME) originating on 2015 March 15. It was an initially west-oriented CME and expected to only cause a weak geomagnetic disturbance. Why did this CME finally cause such a large geomagnetic storm? We try to find some clues by investigating its propagation from the Sun to 1 AU. First, we reconstru…
▽ More
The largest geomagnetic storm so far in the solar cycle 24 was produced by a fast coronal mass ejection (CME) originating on 2015 March 15. It was an initially west-oriented CME and expected to only cause a weak geomagnetic disturbance. Why did this CME finally cause such a large geomagnetic storm? We try to find some clues by investigating its propagation from the Sun to 1 AU. First, we reconstruct the CME's kinematic properties in the corona from the SOHO and SDO imaging data with the aid of the graduated cylindrical shell (GCS) model. It is suggested that the CME propagated to the west $\sim$$33^\circ$$\pm$$10^\circ$ away from the Sun-Earth line with a speed of about 817 km s$^{-1}$ before leaving the field of view of the SOHO/LASCO C3 camera. A magnetic cloud (MC) corresponding to this CME was measured in-situ by the Wind spacecraft two days later. By applying two MC reconstruction methods, we infer the configuration of the MC as well as some kinematic information, which implies that the CME possibly experienced an eastward deflection on its way to 1 AU. However, due to the lack of observations from the STEREO spacecraft, the CME's kinematic evolution in interplanetary space is not clear. In order to fill this gap, we utilize numerical MHD simulation, drag-based CME propagation model (DBM) and the model for CME deflection in interplanetary space (DIPS) to recover the propagation process, especially the trajectory, of the CME from $30 R_S$ to 1 AU. It is suggested that the trajectory of the CME was deflected toward the Earth by about $12^\circ$, consistent with the implication from the MC reconstruction at 1 AU. This eastward deflection probably contributed to the CME's unexpected geoeffectiveness by pushing the center of the initially west-oriented CME closer to the Earth.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.
-
Heliospheric Propagation of Coronal Mass Ejections: Drag-Based Model Fitting
Authors:
T. Žic,
B. Vršnak,
M. Temmer
Abstract:
The so-called drag-based model (DBM) simulates analytically the propagation of coronal mass ejections (CMEs) in interplanetary space and allows the prediction of their arrival times and impact speeds at any point in the heliosphere ("target"). The DBM is based on the assumption that beyond a distance of about 20 solar radii from the Sun, the dominant force acting on CMEs is the "aerodynamic" drag…
▽ More
The so-called drag-based model (DBM) simulates analytically the propagation of coronal mass ejections (CMEs) in interplanetary space and allows the prediction of their arrival times and impact speeds at any point in the heliosphere ("target"). The DBM is based on the assumption that beyond a distance of about 20 solar radii from the Sun, the dominant force acting on CMEs is the "aerodynamic" drag force. In the standard form of DBM, the user provisionally chooses values for the model input parameters, by which the kinematics of the CME over the entire Sun--"target" distance range is defined. The choice of model input parameters is usually based on several previously undertaken statistical studies. In other words, the model is used by ad hoc implementation of statistics-based values of the input parameters, which are not necessarily appropriate for the CME under study. Furthermore, such a procedure lacks quantitative information on how well the simulation reproduces the coronagraphically observed kinematics of the CME, and thus does not provide an estimate of the reliability of the arrival prediction. In this paper we advance the DBM by adopting it in a form that employs the CME observations over a given distance range to evaluate the most suitable model input parameters for a given CME by means of the least-squares fitting. Furthermore, the new version of the model automatically responds to any significant change of the conditions in the ambient medium (solar wind speed, density, CME--CME interactions, etc.) by changing the model input parameters according to changes in the CME kinematics. The advanced DBM is shaped in a form that can be readily employed in an operational system for real-time space-weather forecasting by promptly adjusting to a successively expanding observational dataset, thus providing a successively improving prediction of the CME arrival.
△ Less
Submitted 29 June, 2015;
originally announced June 2015.
-
Combined Multipoint Remote and In Situ Observations of the Asymmetric Evolution of a Fast Solar Coronal Mass Ejection
Authors:
T. Rollett,
C. Moestl,
M. Temmer,
R. A. Frahm,
J. A. Davies,
A. M. Veronig,
B. Vrsnak,
U. V. Amerstorfer,
C. J. Farrugia,
T. Zic,
T. L. Zhang
Abstract:
We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric image…
▽ More
We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric imagery from STEREO-A and B, we derived two different kinematical profiles for the CME by applying the novel constrained self-similar expansion method. In addition, we used a drag-based model to investigate the influence of the ambient solar wind on the CME's propagation. We found that two preceding CMEs heading in different directions disturbed the overall shape of the CME and influenced its propagation behavior. While the Venus-directed segment underwent a gradual deceleration (from ~2700 km/s at 15 R_sun to ~1500 km/s at 154 R_sun), the Earth-directed part showed an abrupt retardation below 35 R_sun (from ~1700 to ~900 km/s). After that, it was propagating with a quasi-constant speed in the wake of a preceding event. Our results highlight the importance of studies concerning the unequal evolution of CMEs. Forecasting can only be improved if conditions in the solar wind are properly taken into account and if attention is also paid to large events preceding the one being studied.
△ Less
Submitted 17 July, 2014;
originally announced July 2014.
-
Investigation on the Coronal Magnetic Field Using a Type II Solar Radio Burst
Authors:
V. Vasanth,
S. Umapathy,
B. Vršnak,
T. Žic,
O. Prakash
Abstract:
The Type-II solar radio burst recorded on 13 June 2010 by the radio spectrograph of the Hiraiso Solar Observatory was employed to estimate the magnetic-field strength in the solar corona. The burst was characterized by a well pronounced band-splitting, which we used to estimate the density jump at the shock and Alfven Mach number using the Rankine-Hugoniot relations. The plasma frequency of the Ty…
▽ More
The Type-II solar radio burst recorded on 13 June 2010 by the radio spectrograph of the Hiraiso Solar Observatory was employed to estimate the magnetic-field strength in the solar corona. The burst was characterized by a well pronounced band-splitting, which we used to estimate the density jump at the shock and Alfven Mach number using the Rankine-Hugoniot relations. The plasma frequency of the Type-II bursts is converted into height [R] in solar radii using the appropriate density model, then we estimated the shock speed [Vs], coronal Alfven velocity [Va], and the magnetic-field strength at different heights. The relative bandwidth of the band-split is found to be in the range 0.2 -- 0.25, corresponding to the density jump of X = 1.44 -- 1.56, and the Alfven Mach number of MA = 1.35 -- 1.45. The inferred mean shock speed was on the order of V ~ 667 km/s. From the dependencies V(R) and MA(R) we found that Alfven speed slightly decreases at R ~ 1.3 -- 1.5. The magnetic-field strength decreases from a value between 2.7 and 1.7 G at R ~ 1.3 -- 1.5 Rs depending on the coronal-density model employed. We find that our results are in good agreement with the empirical scaling by Dulk and McLean (Solar Phys. 57, 279, 1978) and Gopalswamy et al. (Astrophys. J. 744, 72, 2012). Our result shows that Type-II band splitting method is an important tool for inferring the coronal magnetic field, especially when independent measurements were made from white light observations.
△ Less
Submitted 8 May, 2013;
originally announced May 2013.
-
Formation of Coronal Shock Waves
Authors:
S. Lulić,
B. Vršnak,
T. Žic,
I. W. Kienreich,
N. Muhr,
M. Temmer,
A. M. Veronig
Abstract:
Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out tha…
▽ More
Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out that these simple initial configurations result in piston/wave morphologies and kinematics that reproduce common characteristics of coronal waves. In the initial stage the wave and the expanding source-region cannot be clearly resolved. During the acceleration stage of the source-region inflation, the wave is driven by the piston expansion, so its amplitude and phase-speed increase, whereas the wavefront profile steepens. At a given point, a discontinuity forms in the wavefront profile. The time/distance required for the shock formation is shorter for a more impulsive source-region expansion. After the piston stops, the wave amplitude and phase-speed start decreasing. During the expansion, most of the source region becomes strongly rarified, which reproduces the coronal dimming left behind the eruption. On the other hand, the density increases at the source-region boundary, and stays enhanced even after the expansion stops, which might explain stationary brightenings that are sometimes observed at the edges of the erupted coronal structure. In addition, in the rear of the wave a weak density depletion develops, trailing the wave, which is sometimes observed as weak transient coronal dimming. Finally, we find a well defined relationship between the impulsiveness of the source-region expansion and the wave amplitude and phase speed. The results for the cylindrical piston are also compared with the outcome for a planar wave, to find out how different geometries affect the evolution of the wave.
△ Less
Submitted 12 March, 2013;
originally announced March 2013.
-
Characteristics of kinematics of a coronal mass ejection during the 2010 August 1 CME-CME interaction event
Authors:
Manuela Temmer,
Bojan Vrsnak,
Tanja Rollett,
Bianca Bein,
Curt A. de Koning,
Ying Liu,
Eckhard Bosman,
Jackie A. Davies,
Christian Möstl,
Tomislav Zic,
Astrid M. Veronig,
Volker Bothmer,
Richard Harrison,
Nariaki Nitta,
Mario Bisi,
Olga Flor,
Jonathan Eastwood,
Dusan Odstrcil,
Robert Forsyth
Abstract:
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in…
▽ More
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; ~1200 km/s) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; ~700 km/s). By applying a drag-based model we are able to reproduce the kinematical profile of CME2 suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag.
△ Less
Submitted 3 February, 2012;
originally announced February 2012.
-
Analytic modeling of the Moreton wave kinematics
Authors:
M. Temmer,
B. Vrsnak,
T. Zic,
A. M. Veronig
Abstract:
The issue whether Moreton waves are flare-ignited or CME-driven, or a combination of both, is still a matter of debate. We develop an analytical model describing the evolution of a large-amplitude coronal wave emitted by the expansion of a circular source surface in order to mimic the evolution of a Moreton wave. The model results are confronted with observations of a strong Moreton wave observe…
▽ More
The issue whether Moreton waves are flare-ignited or CME-driven, or a combination of both, is still a matter of debate. We develop an analytical model describing the evolution of a large-amplitude coronal wave emitted by the expansion of a circular source surface in order to mimic the evolution of a Moreton wave. The model results are confronted with observations of a strong Moreton wave observed in association with the X3.8/3B flare/CME event from January 17, 2005. Using different input parameters for the expansion of the source region, either derived from the real CME observations (assuming that the upward moving CME drives the wave), or synthetically generated scenarios (expanding flare region, lateral expansion of the CME flanks), we calculate the kinematics of the associated Moreton wave signature. Those model input parameters are determined which fit the observed Moreton wave kinematics best. Using the measured kinematics of the upward moving CME as the model input, we are not able to reproduce the observed Moreton wave kinematics. The observations of the Moreton wave can be reproduced only by applying a strong and impulsive acceleration for the source region expansion acting in a piston mechanism scenario. Based on these results we propose that the expansion of the flaring region or the lateral expansion of the CME flanks is more likely the driver of the Moreton wave than the upward moving CME front.
△ Less
Submitted 26 August, 2009;
originally announced August 2009.
-
Morphology and density of post-CME current sheets
Authors:
B. Vršnak,
G. Poletto,
E. Vujić,
A. Vourlidas,
Y. -K. Ko,
J. C. Raymond,
A. Ciaravella,
T. Žic,
D. F. Webb,
A. Bemporad,
F. Landini,
G. Schettino,
C. Jacobs,
S. T. Suess
Abstract:
Eruption of a coronal mass ejection (CME) drags and "opens" the coronal magnetic field, presumably leading to the formation of a large-scale current sheet and the field relaxation by magnetic reconnection. We analyze physical characteristics of ray-like coronal features formed in the aftermath of CMEs, to check if the interpretation of this phenomenon in terms of reconnecting current sheet is co…
▽ More
Eruption of a coronal mass ejection (CME) drags and "opens" the coronal magnetic field, presumably leading to the formation of a large-scale current sheet and the field relaxation by magnetic reconnection. We analyze physical characteristics of ray-like coronal features formed in the aftermath of CMEs, to check if the interpretation of this phenomenon in terms of reconnecting current sheet is consistent with the observations. The study is focused on measurements of the ray width, density excess, and coronal velocity field as a function of the radial distance. The morphology of rays indicates that they occur as a consequence of Petschek-like reconnection in the large scale current sheet formed in the wake of CME. The hypothesis is supported by the flow pattern, often showing outflows along the ray, and sometimes also inflows into the ray. The inferred inflow velocities range from 3 to 30 km s$^{-1}$, consistent with the narrow opening-angle of rays, adding up to a few degrees. The density of rays is an order of magnitude larger than in the ambient corona. The density-excess measurements are compared with the results of the analytical model in which the Petschek-like reconnection geometry is applied to the vertical current sheet, taking into account the decrease of the external coronal density and magnetic field with height. The model results are consistent with the observations, revealing that the main cause of the density excess in rays is a transport of the dense plasma from lower to larger heights by the reconnection outflow.
△ Less
Submitted 23 February, 2009;
originally announced February 2009.
-
Large amplitude oscillatory motion along a solar filament
Authors:
B. Vrsnak,
A. M. Veronig,
J. K. Thalmann,
T. Zic
Abstract:
Large amplitude oscillations of solar filaments is a phenomenon known for more than half a century. Recently, a new mode of oscillations, characterized by periodical plasma motions along the filament axis, was discovered. We analyze such an event, recorded on 23 January 2002 in Big Bear Solar Observatory H$α$ filtergrams, in order to infer the triggering mechanism and the nature of the restoring…
▽ More
Large amplitude oscillations of solar filaments is a phenomenon known for more than half a century. Recently, a new mode of oscillations, characterized by periodical plasma motions along the filament axis, was discovered. We analyze such an event, recorded on 23 January 2002 in Big Bear Solar Observatory H$α$ filtergrams, in order to infer the triggering mechanism and the nature of the restoring force. Motion along the filament axis of a distinct buldge-like feature was traced, to quantify the kinematics of the oscillatory motion. The data were fitted by a damped sine function, to estimate the basic parameters of the oscillations. In order to identify the triggering mechanism, morphological changes in the vicinity of the filament were analyzed. The observed oscillations of the plasma along the filament was characterized by an initial displacement of 24 Mm, initial velocity amplitude of 51 km/s, period of 50 min, and dam** time of 115 min. We interpret the trigger in terms of poloidal magnetic flux injection by magnetic reconnection at one of the filament legs. The restoring force is caused by the magnetic pressure gradient along the filament axis. The period of oscillations, derived from the linearized equation of motion (harmonic oscillator) can be expressed as $P=π\sqrt{2}L/v_{Aφ}\approx4.4L/v_{Aφ}$, where $v_{Aφ} =B_{\phi0}/\sqrt{μ_0ρ}$ represents the Alfvén speed based on the equilibrium poloidal field $B_{\phi0}$. Combination of our measurements with some previous observations of the same kind of oscillations shows a good agreement with the proposed interpretation.
△ Less
Submitted 12 July, 2007;
originally announced July 2007.