Showing 1–50 of 64 results for author: Zhang, J A

Rethinking Waveform for 6G: Harnessing Delay-Doppler Alignment Modulation

Authors: Zhiqiang Xiao, Xianda Liu, Yong Zeng, J. Andrew Zhang, Shi **, Rui Zhang

Abstract: Waveform design has served as a cornerstone for each generation of mobile communication systems. The future sixth-generation (6G) mobile communication networks are expected to employ larger-scale antenna arrays and exploit higher-frequency bands for further boosting data transmission rate and providing ubiquitous wireless sensing. This brings new opportunities and challenges for 6G waveform design… ▽ More Waveform design has served as a cornerstone for each generation of mobile communication systems. The future sixth-generation (6G) mobile communication networks are expected to employ larger-scale antenna arrays and exploit higher-frequency bands for further boosting data transmission rate and providing ubiquitous wireless sensing. This brings new opportunities and challenges for 6G waveform design. In this article, by leveraging the super spatial resolution of large antenna arrays and the multi-path spatial sparsity of highfrequency wireless channels, we introduce a new approach for waveform design based on the recently proposed delay-Doppler alignment modulation (DDAM). In particular, DDAM makes a paradigm shift of waveform design from the conventional manner of tolerating channel delay and Doppler spreads to actively manipulating them. First, we review the fundamental constraints and performance limitations of orthogonal frequency division multiplexing (OFDM) and introduce new opportunities for 6G waveform design. Next, the motivations and basic principles of DDAM are presented, followed by its various extensions to different wireless system setups. Finally, the main design considerations for DDAM are discussed and the new opportunities for future research are highlighted. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Revealing the Trade-off in ISAC Systems: The KL Divergence Perspective

Authors: Zesong Fei, Shuntian Tang, Xinyi Wang, Fanghao Xia, Fan Liu, J. Andrew Zhang

Abstract: Integrated sensing and communication (ISAC) is regarded as a promising technique for 6G communication network. In this letter, we investigate the Pareto bound of the ISAC system in terms of a unified Kullback-Leibler (KL) divergence performance metric. We firstly present the relationship between KL divergence and explicit ISAC performance metric, i.e., demodulation error and probability of detecti… ▽ More Integrated sensing and communication (ISAC) is regarded as a promising technique for 6G communication network. In this letter, we investigate the Pareto bound of the ISAC system in terms of a unified Kullback-Leibler (KL) divergence performance metric. We firstly present the relationship between KL divergence and explicit ISAC performance metric, i.e., demodulation error and probability of detection. Thereafter, we investigate the impact of constellation and beamforming design on the Pareto bound via deep learning and semi-definite relaxation (SDR) techniques. Simulation results show the trade-off between sensing and communication performance in terms of bit error rate (BER) and probability of detection under different parameter set-ups. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Comments: 5 pages, 5 figures; submitted to IEEE journals for possible publication

Joint Near Field Uplink Communication and Localization Using Message Passing-Based Sparse Bayesian Learning

Authors: Fei Liu, Zhengdao Yuan, Qinghua Guo, Yuanyuan Zhang, Zhongyong Wang, J. Andrew Zhang

Abstract: This work deals with the problem of uplink communication and localization in an integrated sensing and communication system, where users are in the near field (NF) of antenna aperture due to the use of high carrier frequency and large antenna arrays at base stations. We formulate joint NF signal detection and localization as a problem of recovering signals with a sparse pattern. To solve the probl… ▽ More This work deals with the problem of uplink communication and localization in an integrated sensing and communication system, where users are in the near field (NF) of antenna aperture due to the use of high carrier frequency and large antenna arrays at base stations. We formulate joint NF signal detection and localization as a problem of recovering signals with a sparse pattern. To solve the problem, we develop a message passing based sparse Bayesian learning (SBL) algorithm, where multiple unitary approximate message passing (UAMP)-based sparse signal estimators work jointly to recover the sparse signals with low complexity. Simulation results demonstrate the effectiveness of the proposed method. △ Less

Submitted 14 April, 2024; originally announced April 2024.

Heuristic Solution to Joint Deployment and Beamforming Design for STAR-RIS Aided Networks

Authors: Bai Yan, Qi Zhao, ** Zhang, J. Andrew Zhang

Abstract: This paper tackles the deployment challenges of Simultaneous Transmitting and Reflecting Reconfigurable Intelligent Surface (STAR-RIS) in communication systems. Unlike existing works that use fixed deployment setups or solely optimize the location, this paper emphasizes the joint optimization of the location and orientation of STAR-RIS. This enables searching across all user grou** possibilities… ▽ More This paper tackles the deployment challenges of Simultaneous Transmitting and Reflecting Reconfigurable Intelligent Surface (STAR-RIS) in communication systems. Unlike existing works that use fixed deployment setups or solely optimize the location, this paper emphasizes the joint optimization of the location and orientation of STAR-RIS. This enables searching across all user grou** possibilities and fully boosting the system's performance. We consider a sum rate maximization problem with joint optimization and hybrid beamforming design. An offline heuristic solution is proposed for the problem, developed based on differential evolution and semi-definite programming methods. In particular, a point-point representation is proposed for characterizing and exploiting the user-grou**. A balanced grou** method is designed to achieve a desired user grou** with low complexity. Numerical results demonstrate the substantial performance gains achievable through optimal deployment design. △ Less

Submitted 14 April, 2024; originally announced April 2024.

Comments: 30 pages

Interference Management for Full-Duplex ISAC in B5G/6G Networks: Architectures, Challenges, and Solutions

Authors: Aimin Tang, Xudong Wang, J. Andrew Zhang

Abstract: Integrated sensing and communications (ISAC) has been visioned as a key technique for B5G/6G networks. To support monostatic sensing, a full-duplex radio is indispensable to extract echo signals from targets. Such a radio can also greatly improve network capacity via full-duplex communications. However, full-duplex radios in existing ISAC designs are mainly focused on wireless sensing, while the a… ▽ More Integrated sensing and communications (ISAC) has been visioned as a key technique for B5G/6G networks. To support monostatic sensing, a full-duplex radio is indispensable to extract echo signals from targets. Such a radio can also greatly improve network capacity via full-duplex communications. However, full-duplex radios in existing ISAC designs are mainly focused on wireless sensing, while the ability of full-duplex communications is usually ignored. In this article, we provide an overview of full-duplex ISAC (FD-ISAC), where a full-duplex radio is used for both wireless sensing and full-duplex communications in B5G/6G networks, with a focus on the fundamental interference management problem in such networks. First, different ISAC architectures are introduced, considering different full-duplex communication modes and wireless sensing modes. Next, the challenging issues of link-level interference and network-level interference are analyzed, illustrating a critical demand on interference management for FD-ISAC. Potential solutions to interference management are then reviewed from the perspective of radio architecture design, beamforming, mode selection, and resource allocation. The corresponding open problems are also highlighted. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: Accepted by IEEE Communications Magazine

Reproducing the Acoustic Velocity Vectors in a Circular Listening Area

Authors: Jiarui Wang, Thushara Abhayapala, Jihui Aimee Zhang, Prasanga Samarasinghe

Abstract: Acoustic velocity vectors are important for human's localization of sound at low frequencies. This paper proposes a sound field reproduction algorithm, which matches the acoustic velocity vectors in a circular listening area. In previous work, acoustic velocity vectors are matched either at sweet spots or on the boundary of the listening area. Sweet spots restrict listener's movement, whereas meas… ▽ More Acoustic velocity vectors are important for human's localization of sound at low frequencies. This paper proposes a sound field reproduction algorithm, which matches the acoustic velocity vectors in a circular listening area. In previous work, acoustic velocity vectors are matched either at sweet spots or on the boundary of the listening area. Sweet spots restrict listener's movement, whereas measuring the acoustic velocity vectors on the boundary requires complicated measurement setup. This paper proposes the cylindrical harmonic coefficients of the acoustic velocity vectors in a circular area (CHV coefficients), which are calculated from the cylindrical harmonic coefficients of the global pressure (global CHP coefficients) by using the sound field translation formula. The global CHP coefficients can be measured by a circular microphone array, which can be bought off-the-shelf. By matching the CHV coefficients, the acoustic velocity vectors are reproduced throughout the listening area. Hence, listener's movements are allowed. Simulations show that at low frequency, where the acoustic velocity vectors are the dominant factor for localization, the proposed reproduction method based on the CHV coefficients results in higher accuracy in reproduced acoustic velocity vectors when compared with traditional method based on the global CHP coefficients. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: Submitted to EUSIPCO 2024

Performance Bounds for Passive Sensing in Asynchronous ISAC Systems -- Appendices

Authors: **gbo Zhao, Zhaoming Lu, J. Andrew Zhang, Weicai Li, Yifeng Xiong, Zijun Han, Xiangming Wen, Tao Gu

Abstract: This document contains the appendices for our paper titled ``Performance Bounds for Passive Sensing in Asynchronous ISAC Systems." The appendices include rigorous derivations of key formulas, detailed proofs of the theorems and propositions introduced in the paper, and details of the algorithm tested in the numerical simulation for validation. These appendices aim to support and elaborate on the f… ▽ More This document contains the appendices for our paper titled ``Performance Bounds for Passive Sensing in Asynchronous ISAC Systems." The appendices include rigorous derivations of key formulas, detailed proofs of the theorems and propositions introduced in the paper, and details of the algorithm tested in the numerical simulation for validation. These appendices aim to support and elaborate on the findings and methodologies presented in the main text. All external references to equations, theorems, and so forth, are directed towards the corresponding elements within the main paper. △ Less

Submitted 29 March, 2024; v1 submitted 8 March, 2024; originally announced March 2024.

Comments: 5 pages

Sensing in Bi-Static ISAC Systems with Clock Asynchronism: A Signal Processing Perspective

Authors: Kai Wu, Jacopo Pegoraro, Francesca Meneghello, J. Andrew Zhang, Jesus O. Lacruz, Joerg Widmer, Francesco Restuccia, Michele Rossi, Xiao**g Huang, Daqing Zhang, Giuseppe Caire, Y. Jay Guo

Abstract: Integrated Sensing and Communication (ISAC) has been identified as a pillar usage scenario for the impending 6G era. Bi-static sensing, a major type of sensing in ISAC, is promising to expedite ISAC in the near future, as it requires minimal changes to the existing network infrastructure. However, a critical challenge for bi-static sensing is clock asynchronism due to the use of different clocks a… ▽ More Integrated Sensing and Communication (ISAC) has been identified as a pillar usage scenario for the impending 6G era. Bi-static sensing, a major type of sensing in ISAC, is promising to expedite ISAC in the near future, as it requires minimal changes to the existing network infrastructure. However, a critical challenge for bi-static sensing is clock asynchronism due to the use of different clocks at far-separated transmitters and receivers. This causes the received signal to be affected by time-varying random phase offsets, severely degrading, or even failing, direct sensing. Hence, to effectively enable ISAC, considerable research has been directed toward addressing the clock asynchronism issue in bi-static sensing. This paper provides an overview of the issue and existing techniques developed in an ISAC background. Based on the review and comparison, we also draw insights into the future research directions and open problems, aiming to nurture the maturation of bi-static sensing in ISAC. △ Less

Submitted 24 June, 2024; v1 submitted 14 February, 2024; originally announced February 2024.

Comments: 20 pages, 6 figures, 1 table

Anchor-points Assisted Uplink Sensing in Perceptive Mobile Networks

Authors: Yanmo Hu, J. Andrew Zhang, Weibo Deng, Y. Jay Guo

Abstract: Uplink sensing in integrated sensing and communications (ISAC) systems, such as Perceptive Mobile Networks, is challenging due to the clock asynchronism between transmitter and receiver. Existing solutions typically require the presence of a dominating line-of-sight path and the knowledge of transmitter location at the receiver. In this paper, relaxing these requirements, we propose a novel and ef… ▽ More Uplink sensing in integrated sensing and communications (ISAC) systems, such as Perceptive Mobile Networks, is challenging due to the clock asynchronism between transmitter and receiver. Existing solutions typically require the presence of a dominating line-of-sight path and the knowledge of transmitter location at the receiver. In this paper, relaxing these requirements, we propose a novel and effective uplink sensing scheme with the assistance of static anchor points. Two major algorithms are proposed in the scheme. The first algorithm estimates the relative timing and carrier frequency offsets due to clock asynchronism, with respect to those at a randomly selected reference snapshot. Theoretical performance analysis is provided for the algorithm. The estimates from the first algorithm are then used to compensate for the offsets and generate the angle-Doppler maps. Using the maps, the second algorithm identifies the anchor points, and then locates the UE and dynamic targets. Feasibility of UE localization is also analyzed. Simulation results are provided and demonstrate the effectiveness of the proposed algorithms. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Comments: 14 pages, 12 figures, journal paper

Performance Bounds and Optimization for CSI-Ratio based Bi-static Doppler Sensing in ISAC Systems

Authors: Yanmo Hu, Kai Wu, J. Andrew Zhang, Weibo Deng, Y. Jay Guo

Abstract: Bi-static sensing is crucial for exploring the potential of networked sensing capabilities in integrated sensing and communications (ISAC). However, it suffers from the challenging clock asynchronism issue. CSI ratio-based sensing is an effective means to address the issue. Its performance bounds, particular for Doppler sensing, have not been fully understood yet. This work endeavors to fill the r… ▽ More Bi-static sensing is crucial for exploring the potential of networked sensing capabilities in integrated sensing and communications (ISAC). However, it suffers from the challenging clock asynchronism issue. CSI ratio-based sensing is an effective means to address the issue. Its performance bounds, particular for Doppler sensing, have not been fully understood yet. This work endeavors to fill the research gap. Focusing on a single dynamic path in high-SNR scenarios, we derive the closed-form CRB. Then, through analyzing the mutual interference between dynamic and static paths, we simplify the CRB results by deriving close approximations, further unveiling new insights of the impact of numerous physical parameters on Doppler sensing. Moreover, utilizing the new CRB and analyses, we propose novel waveform optimization strategies for noise- and interference-limited sensing scenarios, which are also empowered by closed-form and efficient solutions. Extensive simulation results are provided to validate the preciseness of the derived CRB results and analyses, with the aid of the maximum-likelihood estimator. The results also demonstrate the substantial enhanced Doppler sensing accuracy and the sensing capabilities for low-speed target achieved by the proposed waveform design. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Comments: 14 pages, 15 figures, journal paper

Waveform Design for MIMO-OFDM Integrated Sensing and Communication System: An Information Theoretical Approach

Authors: Zhiqing Wei, **ghui Piao, Xin Yuan, Huici Wu, J. Andrew Zhang, Zhiyong Feng, Lin Wang, ** Zhang

Abstract: Integrated sensing and communication (ISAC) is regarded as the enabling technology in the future 5th-Generation-Advanced (5G-A) and 6th-Generation (6G) mobile communication system. ISAC waveform design is critical in ISAC system. However, the difference of the performance metrics between sensing and communication brings challenges for the ISAC waveform design. This paper applies the unified perfor… ▽ More Integrated sensing and communication (ISAC) is regarded as the enabling technology in the future 5th-Generation-Advanced (5G-A) and 6th-Generation (6G) mobile communication system. ISAC waveform design is critical in ISAC system. However, the difference of the performance metrics between sensing and communication brings challenges for the ISAC waveform design. This paper applies the unified performance metrics in information theory, namely mutual information (MI), to measure the communication and sensing performance in multicarrier ISAC system. In multi-input multi-output orthogonal frequency division multiplexing (MIMO-OFDM) ISAC system, we first derive the sensing and communication MI with subcarrier correlation and spatial correlation. Then, we propose optimal waveform designs for maximizing the sensing MI, communication MI and the weighted sum of sensing and communication MI, respectively. The optimization results are validated by Monte Carlo simulations. Our work provides effective closed-form expressions for waveform design, enabling the realization of MIMO-OFDM ISAC system with balanced performance in communication and sensing. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Integrated Communication, Sensing, and Computation Framework for 6G Networks

Authors: Xu Chen, Zhiyong Feng, J. Andrew Zhang, Zhaohui Yang, Xin Yuan, Xinxin He, ** Zhang

Abstract: In the sixth generation (6G) era, intelligent machine network (IMN) applications, such as intelligent transportation, require collaborative machines with communication, sensing, and computation (CSC) capabilities. This article proposes an integrated communication, sensing, and computation (ICSAC) framework for 6G to achieve the reciprocity among CSC functions to enhance the reliability and latency… ▽ More In the sixth generation (6G) era, intelligent machine network (IMN) applications, such as intelligent transportation, require collaborative machines with communication, sensing, and computation (CSC) capabilities. This article proposes an integrated communication, sensing, and computation (ICSAC) framework for 6G to achieve the reciprocity among CSC functions to enhance the reliability and latency of communication, accuracy and timeliness of sensing information acquisition, and privacy and security of computing to realize the IMN applications. Specifically, the sensing and communication functions can merge into unified platforms using the same transmit signals, and the acquired real-time sensing information can be exploited as prior information for intelligent algorithms to enhance the performance of communication networks. This is called the computing-empowered integrated sensing and communications (ISAC) reciprocity. Such reciprocity can further improve the performance of distributed computation with the assistance of networked sensing capability, which is named the sensing-empowered integrated communications and computation (ICAC) reciprocity. The above ISAC and ICAC reciprocities can enhance each other iteratively and finally lead to the ICSAC reciprocity. To achieve these reciprocities, we explore the potential enabling technologies for the ICSAC framework. Finally, we present the evaluation results of crucial enabling technologies to show the feasibility of the ICSAC framework. △ Less

Submitted 4 October, 2023; originally announced October 2023.

Comments: 8 pages, 5 figures, submitted to IEEE VTM

Sensing Aided Covert Communications: Turning Interference into Allies

Authors: Xinyi Wang, Zesong Fei, Peng Liu, J. Andrew Zhang, Qingqing Wu, Nan Wu

Abstract: In this paper, we investigate the realization of covert communication in a general radar-communication cooperation system, which includes integrated sensing and communications as a special example. We explore the possibility of utilizing the sensing ability of radar to track and jam the aerial adversary target attempting to detect the transmission. Based on the echoes from the target, the extended… ▽ More In this paper, we investigate the realization of covert communication in a general radar-communication cooperation system, which includes integrated sensing and communications as a special example. We explore the possibility of utilizing the sensing ability of radar to track and jam the aerial adversary target attempting to detect the transmission. Based on the echoes from the target, the extended Kalman filtering technique is employed to predict its trajectory as well as the corresponding channels. Depending on the maneuvering altitude of adversary target, two channel state information (CSI) models are considered, with the aim of maximizing the covert transmission rate by jointly designing the radar waveform and communication transmit beamforming vector based on the constructed channels. For perfect CSI under the free-space propagation model, by decoupling the joint design, we propose an efficient algorithm to guarantee that the target cannot detect the transmission. For imperfect CSI due to the multi-path components, a robust joint transmission scheme is proposed based on the property of the Kullback-Leibler divergence. The convergence behaviour, tracking MSE, false alarm and missed detection probabilities, and covert transmission rate are evaluated. Simulation results show that the proposed algorithms achieve accurate tracking. For both channel models, the proposed sensing-assisted covert transmission design is able to guarantee the covertness, and significantly outperforms the conventional schemes. △ Less

Submitted 3 January, 2024; v1 submitted 21 July, 2023; originally announced July 2023.

Comments: 13 pages, 12 figures, submitted to IEEE journals for potential publication

Reproducing the Acoustic Velocity Vectors in a Spherical Listening Region

Authors: Jiarui Wang, Thushara Abhayapala, Jihui Aimee Zhang, Prasanga Samarasinghe

Abstract: Acoustic velocity vectors (AVVs) are related to the human's perception of sound at low frequencies and are widely used in Ambisonics. This paper proposes a spatial sound field reproduction algorithm called velocity matching, which reproduces the AVVs in the spherical listening region by matching the AVVs' spherical harmonic coefficients. Using the sound field translation formula, the spherical har… ▽ More Acoustic velocity vectors (AVVs) are related to the human's perception of sound at low frequencies and are widely used in Ambisonics. This paper proposes a spatial sound field reproduction algorithm called velocity matching, which reproduces the AVVs in the spherical listening region by matching the AVVs' spherical harmonic coefficients. Using the sound field translation formula, the spherical harmonic coefficients of the AVVs are derived from the spherical harmonic coefficients of the pressure, which can be measured by a higher-order microphone array. Unlike algorithms that only control the AVVs at discrete sweet spots, the proposed velocity matching algorithm manipulates the AVVs in the whole spherical listening region and allows the listener to move beyond the sweet spots. Simulations show the proposed velocity matching algorithm accurately reproduces the AVVs in the spherical listening region and requires fewer number of loudspeakers than pressure matching algorithm. △ Less

Submitted 6 June, 2024; v1 submitted 14 July, 2023; originally announced July 2023.

Comments: Submitted to IEEE Signal Processing Letters

Time-Domain Wideband Image Source Method for Spherical Microphone Arrays

Authors: Jiarui Wang, Prasanga Samarasinghe, Thushara Abhayapala, Jihui Aimee Zhang

Abstract: This paper presents the time-domain wideband spherical microphone array impulse response generator (TDW-SMIR generator), which is a time-domain wideband image source method (ISM) for generating the room impulse responses captured by an open spherical microphone array. To incorporate loudspeaker directivity, the TDW-SMIR generator considers a source that emits a sequence of spherical wave fronts wh… ▽ More This paper presents the time-domain wideband spherical microphone array impulse response generator (TDW-SMIR generator), which is a time-domain wideband image source method (ISM) for generating the room impulse responses captured by an open spherical microphone array. To incorporate loudspeaker directivity, the TDW-SMIR generator considers a source that emits a sequence of spherical wave fronts whose amplitudes are related to the loudspeaker directional impulse responses measured in the far-field. The TDW-SMIR generator uses geometric models to derive the time-domain signals recorded by the spherical microphone array. Comparisons are made with frequency-domain single band ISMs. Simulation results prove the results of the TDW-SMIR generator are similar to those of frequency-domain single band ISMs. △ Less

Submitted 9 August, 2023; v1 submitted 15 June, 2023; originally announced June 2023.

Comments: Accepted for publication in the IEEE 25th International Workshop on Multimedia Signal Processing (IEEE MMSP 2023)

Complex CNN CSI Enhancer for Integrated Sensing and Communications

Authors: Xu Chen, Zhiyong Feng, J. Andrew Zhang, Feifei Gao, Xin Yuan, Zhaohui Yang, ** Zhang

Abstract: In this paper, we propose a novel complex convolutional neural network (CNN) CSI enhancer for integrated sensing and communications (ISAC), which exploits the correlation between the sensing parameters (such as angle-of-arrival and range) and the channel state information (CSI) to significantly improve the CSI estimation accuracy and further enhance the sensing accuracy. Within the CNN CSI enhance… ▽ More In this paper, we propose a novel complex convolutional neural network (CNN) CSI enhancer for integrated sensing and communications (ISAC), which exploits the correlation between the sensing parameters (such as angle-of-arrival and range) and the channel state information (CSI) to significantly improve the CSI estimation accuracy and further enhance the sensing accuracy. Within the CNN CSI enhancer, we use the complex-valued computation layers to form the CNN, which maintains the phase information of CSI. We also transform the CSI into the sparse angle-delay domain, leading to heatmap images with prominent peaks that can be efficiently processed by CNN. Based on the enhanced CSI outputs, we further propose a novel biased fast Fourier transform (FFT)-based sensing scheme for improving the range sensing accuracy, by artificially introducing phase biasing terms. Extensive simulation results show that the ISAC complex CNN CSI enhancer can converge within 30 training epochs. The normalized mean square error (NMSE) of its CSI estimates is about 17 dB lower than that of the linear minimum mean square error (LMMSE) estimator, and the bit error rate (BER) of demodulation using the enhanced CSI estimation approaches that with perfect CSI. Finally, the range estimation MSE of the proposed biased FFT-based sensing method approaches that of the subspace-based sensing method, at a much lower complexity. △ Less

Submitted 19 June, 2023; v1 submitted 29 May, 2023; originally announced May 2023.

Comments: 13 pages, 15 figures, submitted to IEEE Journal of Selected Topics in Signal Processing

Sensing Aided Uplink Transmission in OTFS ISAC with Joint Parameter Association, Channel Estimation and Signal Detection

Authors: Xi Yang, Hang Li, Qinghua Guo, J. Andrew Zhang, Xiao**g Huang, Zhiqun Cheng

Abstract: In this work, we study sensing-aided uplink transmission in an integrated sensing and communication (ISAC) vehicular network with the use of orthogonal time frequency space (OTFS) modulation. To exploit sensing parameters for improving uplink communications, the parameters must be first associated with the transmitters, which is a challenging task. We propose a scheme that jointly conducts paramet… ▽ More In this work, we study sensing-aided uplink transmission in an integrated sensing and communication (ISAC) vehicular network with the use of orthogonal time frequency space (OTFS) modulation. To exploit sensing parameters for improving uplink communications, the parameters must be first associated with the transmitters, which is a challenging task. We propose a scheme that jointly conducts parameter association, channel estimation and signal detection by formulating it as a constrained bilinear recovery problem. Then we develop a message passing algorithm to solve the problem, leveraging the bilinear unitary approximate message passing (Bi-UAMP) algorithm. Numerical results validate the proposed scheme, which show that relevant performance bounds can be closely approached. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Vital Sign Monitoring in Dynamic Environment via mmWave Radar and Camera Fusion

Authors: Yingqi Wang, Zhongqin Wang, J. Andrew Zhang, Haimin Zhang, Min Xu

Abstract: Contact-free vital sign monitoring, which uses wireless signals for recognizing human vital signs (i.e, breath and heartbeat), is an attractive solution to health and security. However, the subject's body movement and the change in actual environments can result in inaccurate frequency estimation of heartbeat and respiratory. In this paper, we propose a robust mmWave radar and camera fusion system… ▽ More Contact-free vital sign monitoring, which uses wireless signals for recognizing human vital signs (i.e, breath and heartbeat), is an attractive solution to health and security. However, the subject's body movement and the change in actual environments can result in inaccurate frequency estimation of heartbeat and respiratory. In this paper, we propose a robust mmWave radar and camera fusion system for monitoring vital signs, which can perform consistently well in dynamic scenarios, e.g., when some people move around the subject to be tracked, or a subject waves his/her arms and marches on the spot. Three major processing modules are developed in the system, to enable robust sensing. Firstly, we utilize a camera to assist a mmWave radar to accurately localize the subjects of interest. Secondly, we exploit the calculated subject position to form transmitting and receiving beamformers, which can improve the reflected power from the targets and weaken the impact of dynamic interference. Thirdly, we propose a weighted multi-channel Variational Mode Decomposition (WMC-VMD) algorithm to separate the weak vital sign signals from the dynamic ones due to subject's body movement. Experimental results show that, the 90${^{th}}$ percentile errors in respiration rate (RR) and heartbeat rate (HR) are less than 0.5 RPM (respirations per minute) and 6 BPM (beats per minute), respectively. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems

Authors: Yongqing Xu, Yong Li, J. Andrew Zhang, Marco Di Renzo, Tony Q. S. Quek

Abstract: Integrated sensing and communications (ISAC) is an emerging critical technique for the next generation of communication systems. However, due to multiple performance metrics used for communication and sensing, the limited degrees-of-freedom (DoF) in optimizing ISAC systems poses a challenge. Reconfigurable intelligent surfaces (RIS) can introduce new DoF for beamforming in ISAC systems, thereby en… ▽ More Integrated sensing and communications (ISAC) is an emerging critical technique for the next generation of communication systems. However, due to multiple performance metrics used for communication and sensing, the limited degrees-of-freedom (DoF) in optimizing ISAC systems poses a challenge. Reconfigurable intelligent surfaces (RIS) can introduce new DoF for beamforming in ISAC systems, thereby enhancing the performance of communication and sensing simultaneously. In this paper, we propose two optimization techniques for beamforming in RIS-assisted ISAC systems. The first technique is an alternating optimization (AO) algorithm based on the semidefinite relaxation (SDR) method and a one-dimension iterative (ODI) algorithm, which can maximize the radar mutual information (MI) while imposing constraints on the communication rates. The second technique is an AO algorithm based on the Riemannian gradient (RG) method, which can maximize the weighted ISAC performance metrics. Simulation results verify the effectiveness of the proposed schemes. The AO-SDR-ODI method is shown to achieve better communication and sensing performance, than the AO-RG method, at a higher complexity. It is also shown that the mean-squared-error (MSE) of the estimates of the sensing parameters decreases as the radar MI increases. △ Less

Submitted 24 January, 2024; v1 submitted 3 March, 2023; originally announced March 2023.

Comments: 30 pages, 8 figures. This paper has been accepted by IEEE Transactions on Communications

Air-Ground Integrated Sensing and Communications: Opportunities and Challenges

Authors: Zesong Fei, Xinyi Wang, Nan Wu, **gxuan Huang, J. Andrew Zhang

Abstract: The air-ground integrated sensing and communications (AG-ISAC) network, which consists of unmanned aerial vehicles (UAVs) and ground terrestrial networks, offers unique capabilities and demands special design techniques. In this article, we provide a review on AG-ISAC, by introducing UAVs as ``relay'' nodes for both communications and sensing to resolve the power and computation constraints on UAV… ▽ More The air-ground integrated sensing and communications (AG-ISAC) network, which consists of unmanned aerial vehicles (UAVs) and ground terrestrial networks, offers unique capabilities and demands special design techniques. In this article, we provide a review on AG-ISAC, by introducing UAVs as ``relay'' nodes for both communications and sensing to resolve the power and computation constraints on UAVs. We first introduce an AG-ISAC framework, including the system architecture and protocol. Four potential use cases are then discussed, with the analysis on the characteristics and merits of AG-ISAC networks. The research on several critical techniques for AG-ISAC is then discussed. Finally, we present our vision of the challenges and future research directions for AG-ISAC, to facilitate the advancement of the technology. △ Less

Submitted 12 February, 2023; originally announced February 2023.

Comments: 7 pages, 4 figures. To appear in IEEE Communications Magazines

Practical Frequency-Hop** MIMO Joint Radar Communications: Design and Experiment

Authors: Jiangtao Liu, Kai Wu, Tao Su, J. Andrew Zhang

Abstract: Joint radar and communications (JRC) can realize two radio frequency (RF) functions using one set of resources, greatly saving hardware, energy and spectrum for wireless systems needing both functions. Frequency-hop** (FH) MIMO radar is a popular candidate for JRC, as the achieved communication symbol rate can greatly exceed radar pulse repetition frequency. However, practical transceiver imperf… ▽ More Joint radar and communications (JRC) can realize two radio frequency (RF) functions using one set of resources, greatly saving hardware, energy and spectrum for wireless systems needing both functions. Frequency-hop** (FH) MIMO radar is a popular candidate for JRC, as the achieved communication symbol rate can greatly exceed radar pulse repetition frequency. However, practical transceiver imperfections can fail many existing theoretical designs. In this work, we unveil for the first time the non-trivial impact of hardware imperfections on FH-MIMO JRC and analytically model the impact. We also design new waveforms and, accordingly, develop a low-complexity algorithm to jointly estimate the hardware imperfections of unsynchronized receiver. Moreover, employing low-cost software-defined radios and commercial off-the-shelf (COTS) products, we build the first FH-MIMO JRC experiment platform with radar and communications simultaneously validated over the air. Corroborated by simulation and experiment results, the proposed designs achieves high performances for both radar and communications. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 11 pages; 12 figures

Kalman Filter-based Sensing in Communication Systems with Clock Asynchronism

Authors: Xu Chen, Zhiyong Feng, J. Andrew Zhang, Xin Yuan, ** Zhang

Abstract: In this paper, we propose a novel Kalman Filter (KF)-based uplink (UL) joint communication and sensing (JCAS) scheme, which can significantly reduce the range and location estimation errors due to the clock asynchronism between the base station (BS) and user equipment (UE). Clock asynchronism causes time-varying time offset (TO) and carrier frequency offset (CFO), leading to major challenges in up… ▽ More In this paper, we propose a novel Kalman Filter (KF)-based uplink (UL) joint communication and sensing (JCAS) scheme, which can significantly reduce the range and location estimation errors due to the clock asynchronism between the base station (BS) and user equipment (UE). Clock asynchronism causes time-varying time offset (TO) and carrier frequency offset (CFO), leading to major challenges in uplink sensing. Unlike existing technologies, our scheme does not require knowing the location of the UE in advance, and retains the linearity of the sensing parameter estimation problem. We first estimate the angle-of-arrivals (AoAs) of multipaths and use them to spatially filter the CSI. Then, we propose a KF-based CSI enhancer that exploits the estimation of Doppler with CFO as the prior information to significantly suppress the time-varying noise-like TO terms in spatially filtered CSIs. Subsequently, we can estimate the accurate ranges of UE and the scatterers based on the KF-enhanced CSI. Finally, we identify the UE's AoA and range estimation and locate UE, then locate the dumb scatterers using the bi-static system. Simulation results validate the proposed scheme. The localization root mean square error of the proposed method is about 20 dB lower than the benchmarking scheme. △ Less

Submitted 19 June, 2023; v1 submitted 8 November, 2022; originally announced November 2022.

Comments: 13 pages, 16 figures, submitted to IEEE transactions on signal processing, under review

Downlink and Uplink Cooperative Joint Communication and Sensing

Authors: Xu Chen, Zhiyong Feng, J. Andrew Zhang, Zhiqing Wei, Xin Yuan, ** Zhang

Abstract: Downlink (DL) and uplink (UL) joint communication and sensing (JCAS) technologies have been individually studied for realizing sensing using DL and UL communication signals, respectively. Since the spatial environment and JCAS channels in the consecutive DL and UL JCAS time slots are generally unchanged, DL and UL JCAS may be jointly designed to achieve better sensing performance. In this paper, w… ▽ More Downlink (DL) and uplink (UL) joint communication and sensing (JCAS) technologies have been individually studied for realizing sensing using DL and UL communication signals, respectively. Since the spatial environment and JCAS channels in the consecutive DL and UL JCAS time slots are generally unchanged, DL and UL JCAS may be jointly designed to achieve better sensing performance. In this paper, we propose a novel DL and UL cooperative (DUC) JCAS scheme, including a unified multiple signal classification (MUSIC)-based JCAS sensing scheme for both DL and UL JCAS and a DUC JCAS fusion method. The unified MUSIC JCAS sensing scheme can accurately estimate AoA, range, and Doppler based on a unified MUSIC-based sensing module. The DUC JCAS fusion method can distinguish between the sensing results of the communication user and other dumb targets. Moreover, by exploiting the channel reciprocity, it can also improve the sensing and channel state information (CSI) estimation accuracy. Extensive simulation results validate the proposed DUC JCAS scheme. It is shown that the minimum location and velocity estimation mean square errors of the proposed DUC JCAS scheme are about 20 dB lower than those of the state-of-the-art separated DL and UL JCAS schemes. △ Less

Submitted 26 April, 2023; v1 submitted 8 November, 2022; originally announced November 2022.

Comments: 14 pages, 10 figures, submitted to IEEE Transactions on Vehicular Technology

Multiple Signal Classification Based Joint Communication and Sensing System

Authors: Xu Chen, Zhiyong Feng, Zhiqing Wei, Xin Yuan, ** Zhang, J. Andrew Zhang, Heng Yang

Abstract: Joint communication and sensing (JCS) has become a promising technology for mobile networks because of its higher spectrum and energy efficiency. Up to now, the prevalent fast Fourier transform (FFT)-based sensing method for mobile JCS networks is on-grid based, and the grid interval determines the resolution. Because the mobile network usually has limited consecutive OFDM symbols in a downlink (D… ▽ More Joint communication and sensing (JCS) has become a promising technology for mobile networks because of its higher spectrum and energy efficiency. Up to now, the prevalent fast Fourier transform (FFT)-based sensing method for mobile JCS networks is on-grid based, and the grid interval determines the resolution. Because the mobile network usually has limited consecutive OFDM symbols in a downlink (DL) time slot, the sensing accuracy is restricted by the limited resolution, especially for velocity estimation. In this paper, we propose a multiple signal classification (MUSIC)-based JCS system that can achieve higher sensing accuracy for the angle of arrival, range, and velocity estimation, compared with the traditional FFT-based JCS method. We further propose a JCS channel state information (CSI) enhancement method by leveraging the JCS sensing results. Finally, we derive a theoretical lower bound for sensing mean square error (MSE) by using perturbation analysis. Simulation results show that in terms of the sensing MSE performance, the proposed MUSIC-based JCS outperforms the FFT-based one by more than 20 dB. Moreover, the bit error rate (BER) of communication demodulation using the proposed JCS CSI enhancement method is significantly reduced compared with communication using the originally estimated CSI. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 30 pages, 10 figures, major revision to IEEE Transactions on Wireless Communications

Sensing-aided Uplink Channel Estimation for Joint Communication and Sensing

Authors: Xu Chen, Zhiyong Feng, J. Andrew Zhang, Zhiqing Wei, Xin Yuan, ** Zhang

Abstract: The joint communication and sensing (JCAS) technique has drawn great attention due to its high spectrum efficiency by using the same transmit signal for both communication and sensing. Exploiting the correlation between the uplink (UL) channel and the sensing results, we propose a sensing-aided Kalman filter (SAKF)-based channel state information (CSI) estimation method for UL JCAS, which exploits… ▽ More The joint communication and sensing (JCAS) technique has drawn great attention due to its high spectrum efficiency by using the same transmit signal for both communication and sensing. Exploiting the correlation between the uplink (UL) channel and the sensing results, we propose a sensing-aided Kalman filter (SAKF)-based channel state information (CSI) estimation method for UL JCAS, which exploits the angle-of-arrival (AoA) estimation to improve the CSI estimation accuracy. A Kalman filter (KF)-based CSI enhancement method is proposed to refine the least-square CSI estimation by exploiting the estimated AoA as the prior information. Simulation results show that the bit error rates (BER) of UL communication using the proposed SAKF-based CSI estimation method approach those using the minimum mean square error (MMSE) method, while at significantly reduced complexity. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 4 pages, 5 figures, IEEE letter

Concurrent Downlink and Uplink Joint Communication and Sensing for 6G Networks

Authors: Xu Chen, Zhiyong Feng, Zhiqing Wei, J. Andrew Zhang, Xin Yuan, ** Zhang

Abstract: Joint communication and sensing (JCAS) is a promising technology for 6th Generation (6G) mobile networks, such as intelligent vehicular networks, intelligent manufacturing, and so on. Equipped with two spatially separated antenna arrays, the base station (BS) can perform downlink active JCAS in a mono-static setup. This paper proposes a Concurrent Downlink and Uplink (CDU) JCAS system where the BS… ▽ More Joint communication and sensing (JCAS) is a promising technology for 6th Generation (6G) mobile networks, such as intelligent vehicular networks, intelligent manufacturing, and so on. Equipped with two spatially separated antenna arrays, the base station (BS) can perform downlink active JCAS in a mono-static setup. This paper proposes a Concurrent Downlink and Uplink (CDU) JCAS system where the BS can use the echo of transmitted dedicated signals for sensing in the uplink timeslot, while performing reliable uplink communication. A novel successive interference cancellation-based CDU JCAS processing method is proposed to enable the estimation of uplink communication symbols and downlink sensing parameters. Extensive simulation results verify the feasibility of the CDU JCAS system, showing a performance improvement of more than 10 dB compared to traditional JCAS methods while maintaining reliable uplink communication. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 5 pages, 5 figures, submitted to IEEE transactions on vehicular technology correspondence

Uplink Sensing Using CSI Ratio in Perceptive Mobile Networks

Authors: Zhitong Ni, J. Andrew Zhang, Kai Wu, Ren ** Liu

Abstract: Uplink sensing in perceptive mobile networks (PMNs), which uses uplink communication signals for sensing the environment around a base station, faces challenging issues of clock asynchronism and the requirement of a line-of-sight (LOS) path between transmitters and receivers. The channel state information (CSI) ratio has been applied to resolve these issues, however, current research on the CSI ra… ▽ More Uplink sensing in perceptive mobile networks (PMNs), which uses uplink communication signals for sensing the environment around a base station, faces challenging issues of clock asynchronism and the requirement of a line-of-sight (LOS) path between transmitters and receivers. The channel state information (CSI) ratio has been applied to resolve these issues, however, current research on the CSI ratio is limited to Doppler estimation in a single dynamic path. This paper proposes an advanced parameter estimation scheme that can extract multiple dynamic parameters, including Doppler frequency, angle-of-arrival (AoA), and delay, in a communication uplink channel and completes the localization of multiple moving targets. Our scheme is based on the multi-element Taylor series of the CSI ratio that converts a nonlinear function of sensing parameters to linear forms and enables the applications of traditional sensing algorithms. Using the truncated Taylor series, we develop novel multiple-signal-classification grid searching algorithms for estimating Doppler frequencies and AoAs and use the least-square method to obtain delays. Both experimental and simulation results are provided, demonstrating that our proposed scheme can achieve good performances for sensing both single and multiple dynamic paths, without requiring the presence of a LOS path. △ Less

Submitted 6 November, 2022; originally announced November 2022.

Simultaneous Beam and User Selection for the Beamspace mmWave/THz Massive MIMO Downlink

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Y. Jay Guo, Lajos Hanzo

Abstract: Beamspace millimeter-wave (mmWave) and terahertz (THz) massive MIMO constitute attractive schemes for next-generation communications, given their abundant bandwidth and high throughput. However, their user and beam selection problem has to be efficiently addressed. Inspired by this challenge, we develop low-complexity solutions explicitly. We introduce the dirty paper coding (DPC) into the joint u… ▽ More Beamspace millimeter-wave (mmWave) and terahertz (THz) massive MIMO constitute attractive schemes for next-generation communications, given their abundant bandwidth and high throughput. However, their user and beam selection problem has to be efficiently addressed. Inspired by this challenge, we develop low-complexity solutions explicitly. We introduce the dirty paper coding (DPC) into the joint user and beam selection problem. We unveil the compelling properties of the DPC sum rate in beamspace massive MIMO, showing its monotonic evolution against the number of users and beams selected. We then exploit its beneficial properties for substantially simplifying the joint user and beam selection problem. Furthermore, we develop a set of algorithms striking unique trade-offs for solving the simplified problem, facilitating simultaneous user and beam selection based on partial beamspace channels for the first time. Additionally, we derive the sum rate bound of the algorithms and analyze their complexity. Our simulation results validate the effectiveness of the proposed design and analysis, confirming their superiority over prior solutions. △ Less

Submitted 15 January, 2023; v1 submitted 20 August, 2022; originally announced August 2022.

Comments: 12 pages, 8 figures; to appear in IEEE Transactions on Communications

Joint Communications and Sensing Employing Optimized MIMO-OFDM Signals

Authors: Kai Wu, J. Andrew Zhang, Zhitong Ni, Xiao**g Huang, Y. Jay Guo, Shanzhi Chen

Abstract: Joint communication and sensing (JCAS) has the potential to improve the overall energy, cost and frequency efficiency of IoT systems. As a first effort, we propose to optimize the MIMO-OFDM data symbols carried by sub-carriers for better time- and spatial-domain signal orthogonality. This not only boosts the availability of usable signals for JCAS, but also significantly facilitates Internet-of-Th… ▽ More Joint communication and sensing (JCAS) has the potential to improve the overall energy, cost and frequency efficiency of IoT systems. As a first effort, we propose to optimize the MIMO-OFDM data symbols carried by sub-carriers for better time- and spatial-domain signal orthogonality. This not only boosts the availability of usable signals for JCAS, but also significantly facilitates Internet-of-Things (IoT) devices to perform high-quality sensing. We establish an optimization problem that modifies data symbols on sub-carriers to enhance the above-mentioned signal orthogonality. We also develop an efficient algorithm to solve the problem based on the majorization-minimization framework. Moreover, we discover unique signal structures and features from the newly modeled problem, which substantially reduce the complexity of majorizing the objective function. We also develop new projectors to enforce the feasibility of the obtained solution. Simulations show that, compared with the original communication waveform to achieve the same sensing performance, the optimized waveform can reduce the signal-to-noise ratio (SNR) requirement by 3~4.5 dB, while the SNR loss for the uncoded bit error rate is only 1~1.5 dB. △ Less

Submitted 20 August, 2022; originally announced August 2022.

Comments: 15 pages, 7 figures; submitted to an IEEE journal

Green Joint Communications and Sensing Employing Analog Multi-Beam Antenna Arrays

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Robert W. Heath Jr., Y. Jay Guo

Abstract: Joint communications and sensing (JCAS) is potentially a hallmark technology for the sixth generation mobile network (6G). Most existing JCAS designs are based on digital arrays, analog arrays with tunable phase shifters, or hybrid arrays, which are effective but are generally complicated to design and power inefficient. This article introduces the energy-efficient and easy-to-design multi-beam an… ▽ More Joint communications and sensing (JCAS) is potentially a hallmark technology for the sixth generation mobile network (6G). Most existing JCAS designs are based on digital arrays, analog arrays with tunable phase shifters, or hybrid arrays, which are effective but are generally complicated to design and power inefficient. This article introduces the energy-efficient and easy-to-design multi-beam antenna arrays (MBAAs) for JCAS. Using pre-designed and fixed analog devices, such as lens or Butler matrix, MBAA can simultaneously steer multiple beams yet with negligible power consumption compared with other techniques. Moreover, MBAAs enable flexible beam synthesis, accurate angle-of-arrival estimation, and easy handling/utilization of the beam squint effect. All these features have not been well captured by the JACS community yet. To promote the awareness of them, we intuitively illustrate them and also exploit them for constructing a multi-beam JCAS framework. Finally, the challenges and opportunities are discussed to foster the development of green JCAS systems. △ Less

Submitted 1 January, 2023; v1 submitted 20 August, 2022; originally announced August 2022.

Comments: to appear in IEEE Communications Magazine; 7 pages, 5 figures, 1 table

Tamperproof IoT with Blockchain

Authors: Guangsheng Yu, Ren ** Liu, J. Andrew Zhang, Y. Jay Guo

Abstract: We investigate the tamper-resistant property of Blockchain and its effectiveness for IoT systems. In particular, we implemented an IoT testbed, and built a Blockchain into the testbed. A number of tamper-resistance experiments were conducted and analyzed to corroborate the process of block validation in Blockchain. Our analysis and experimental results demonstrate the tamper-resistant capability o… ▽ More We investigate the tamper-resistant property of Blockchain and its effectiveness for IoT systems. In particular, we implemented an IoT testbed, and built a Blockchain into the testbed. A number of tamper-resistance experiments were conducted and analyzed to corroborate the process of block validation in Blockchain. Our analysis and experimental results demonstrate the tamper-resistant capability of Blockchain in securing trust in IoT systems. The demonstration video is provided at [1]. △ Less

Submitted 9 August, 2022; originally announced August 2022.

Comments: 3 pages, 5 figures

Frequency Hop** Joint Radar-Communications with Hybrid Sub-pulse Frequency and Duration

Authors: Linh Manh Hoang, J. Andrew Zhang, Diep N. Nguyen, Dinh Thai Hoang

Abstract: Frequency-hop** (FH) joint radar-communications (JRC) can offer excellent security for integrated sensing and communication systems. However, existing JRC schemes mainly embed information using only the sub-pulse frequencies and hence the data rate is limited. In this paper, we propose to use both sub-pulse frequencies and durations for information modulation, leading to higher communication dat… ▽ More Frequency-hop** (FH) joint radar-communications (JRC) can offer excellent security for integrated sensing and communication systems. However, existing JRC schemes mainly embed information using only the sub-pulse frequencies and hence the data rate is limited. In this paper, we propose to use both sub-pulse frequencies and durations for information modulation, leading to higher communication data rates. For information demodulation, we propose a novel scheme by using the time-frequency analysis (TFA) technique and a "you only look once" (YOLO)-based detection system. As such, our system does not require channel estimation, simplifying the transmission signal frame design. Simulation results demonstrate the effectiveness of our scheme, and show that it is robust against the Doppler shift and timing offset between the transceiver and the communication receiver. △ Less

Submitted 26 April, 2022; originally announced April 2022.

Comments: 5 pages

Integration of Radar Sensing into Communications with Asynchronous Transceivers

Authors: J. Andrew Zhang, Kai Wu, Xiao**g Huang, Y. Jay Guo, Daqing Zhang, Robert W. Heath Jr

Abstract: Clock asynchronism is a critical issue in integrating radar sensing into communication networks. It can cause ranging ambiguity and prevent coherent processing of dis-continuous measurements in integration with asynchronous transceivers. Should it be resolved, sensing can be efficiently realized in communication networks, requiring little network infrastructure and hardware changes. This article p… ▽ More Clock asynchronism is a critical issue in integrating radar sensing into communication networks. It can cause ranging ambiguity and prevent coherent processing of dis-continuous measurements in integration with asynchronous transceivers. Should it be resolved, sensing can be efficiently realized in communication networks, requiring little network infrastructure and hardware changes. This article provides a systematic overview of existing and potential new techniques for tackling this fundamental problem. We first review existing solutions, including using a fine-tuned global reference clock, and single-node-based and network-based techniques. We then examine open problems and research opportunities, offering insights into what may be better realized in each of the three solution areas. △ Less

Submitted 25 July, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 7, 3 figures, 3 tables

Fast and Accurate Linear Fitting for Incompletely Sampled Gaussian Function With a Long Tail

Authors: Kai Wu, J. Andrew Zhang, Y. Jay Guo

Abstract: Fitting experiment data onto a curve is a common signal processing technique to extract data features and establish the relationship between variables. Often, we expect the curve to comply with some analytical function and then turn data fitting into estimating the unknown parameters of a function. Among analytical functions for data fitting, Gaussian function is the most widely used one due to it… ▽ More Fitting experiment data onto a curve is a common signal processing technique to extract data features and establish the relationship between variables. Often, we expect the curve to comply with some analytical function and then turn data fitting into estimating the unknown parameters of a function. Among analytical functions for data fitting, Gaussian function is the most widely used one due to its extensive applications in numerous science and engineering fields. To name just a few, Gaussian function is highly popular in statistical signal processing and analysis, thanks to the central limit theorem [1]; Gaussian function frequently appears in the quantum harmonic oscillator, quantum field theory, optics, lasers, and many other theories and models in Physics [2]; moreover, Gaussian function is widely applied in chemistry for depicting molecular orbitals, in computer science for imaging processing and in artificial intelligence for defining neural networks. △ Less

Submitted 25 July, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: 7 pages; 3 figures; 2 tables; accepted to be published in IEEE Signal Processing Magazine. Simulation codes can be downloaded from the link provided in the paper. Should you use the codes in any way, please cite this work. Thanks for your interest

Integrated Human Activity Sensing and Communications

Authors: Xinyu Li, Yuanhao Cui, J. Andrew Zhang, Fan Liu, Daqing Zhang, Lajos Hanzo

Abstract: Advances in wireless communication and signal processing facilitate integrated sensing and communication a compelling technology that intrinsically combines sensing and communication functionalities for the dual purpose exploitation of wireless hardware resources and pursues mutual benefits. Consequently, the next generation communications network will be perceptive. In this article, we provide a… ▽ More Advances in wireless communication and signal processing facilitate integrated sensing and communication a compelling technology that intrinsically combines sensing and communication functionalities for the dual purpose exploitation of wireless hardware resources and pursues mutual benefits. Consequently, the next generation communications network will be perceptive. In this article, we provide a review of human related sensing in the context of ISAC. We first present a general ISAC receiver signal processing framework, with a focus on human activity recognition. Based on its specific spatial deployments, we then categorize ISAC HAR into monostatic, bistatic, and distributed deployments, and discuss their properties, critical research problems and solutions. To facilitate the system's realization and improve its recognition performance, we then explore the inherent connections between the physical layer system parameters and HAR performance metrics. Experimental results are presented for characterizing the sensing potentials of different ISAC systems. Finally, we review the technical challenges and identify the open research problems. △ Less

Submitted 27 July, 2022; v1 submitted 18 February, 2022; originally announced February 2022.

Multiple Correlated Jammers Nullification using LSTM-based Deep Dueling Neural Network

Authors: Linh Manh Hoang, Diep N. Nguyen, J. Andrew Zhang, Dinh Thai Hoang

Abstract: Suppressing the deliberate interference for wireless networks is critical to guarantee a reliable communication link. However, nullifying the jamming signals can be problematic when the correlations between transmitted jamming signals are deliberately varied over time. Specifically, recent studies reveal that by deliberately varying the correlations among jamming signals, attackers can effectively… ▽ More Suppressing the deliberate interference for wireless networks is critical to guarantee a reliable communication link. However, nullifying the jamming signals can be problematic when the correlations between transmitted jamming signals are deliberately varied over time. Specifically, recent studies reveal that by deliberately varying the correlations among jamming signals, attackers can effectively vary the jamming channels and thus their nullspace, even when the physical channels remain unchanged. That makes the beam-forming matrix derived from the nullspace of the jamming channels unable to suppress the jamming signals. Most existing solutions only consider unchanged correlations or heuristically adapt to the time-varying correlation problem by continuously monitoring the residual jamming signals before updating the beam-forming matrix. In this paper, we systematically formulate the optimization problem of the nullspace estimation and data transmission phases. Even ignoring the unknown strategy of the jammers and the challenging nullspace estimation process, the resulting problem is an integer programming problem, hence intractable to obtain its optimal solution. To tackle it and address the unknown strategy of the jammer, we reformulate the problem using a partially observable semi-Markov decision process (POSMDP) and then design a deep dueling Q-learning based framework to tune the duration of the nullspace estimation and data transmission phases. Extensive simulations demonstrate that the proposed techniques effectively deal with jamming signals whose correlations vary over time, and the range of correlations is unknown. Especially, our techniques do not require continuous monitoring of the residual jamming signals (after the nullification process) before updating the beam-forming matrix. As such, the system is more spectral-efficient and has a lower outage probability. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Comments: The paper is 30 pages long and contains 10 figures

MSC Class: 68M12 ACM Class: H.4.3

OTFS-Based Joint Communication and Sensing for Future Industrial IoT

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Y. Jay Guo

Abstract: Effective wireless communications are increasingly important in maintaining the successful closed-loop operation of mission-critical industrial Internet-of-Things (IIoT) applications. To meet the ever-increasing demands on better wireless communications for IIoT, we propose an orthogonal time-frequency space (OTFS) waveform-based joint communication and radio sensing (JCAS) scheme -- an energy-eff… ▽ More Effective wireless communications are increasingly important in maintaining the successful closed-loop operation of mission-critical industrial Internet-of-Things (IIoT) applications. To meet the ever-increasing demands on better wireless communications for IIoT, we propose an orthogonal time-frequency space (OTFS) waveform-based joint communication and radio sensing (JCAS) scheme -- an energy-efficient solution for not only reliable communications but also high-accuracy sensing. OTFS has been demonstrated to have higher reliability and energy efficiency than the currently popular IIoT communication waveforms. JCAS has also been highly recommended for IIoT, since it saves cost, power and spectrum compared to having two separate radio frequency systems. Performing JCAS based on OTFS, however, can be hindered by a lack of effective OTFS sensing. This paper is dedicated to filling this technology gap. We first design a series of echo pre-processing methods that successfully remove the impact of communication data symbols in the time-frequency domain, where major challenges, like inter-carrier and inter-symbol interference and noise amplification, are addressed. Then, we provide a comprehensive analysis of the signal-to-interference-plus-noise ratio (SINR) for sensing and optimize a key parameter of the proposed method to maximize the SINR. Extensive simulations show that the proposed sensing method approaches the maximum likelihood estimator with respect to the estimation accuracy of target parameters and manifests applicability to wide ranges of key system parameters. Notably, the complexity of the proposed method is only dominated by a two-dimensional Fourier transform. △ Less

Submitted 5 November, 2021; originally announced November 2021.

Comments: 17 pages, 6 figures; submitted to IEEE journal

Hybrid Beamforming for RIS-Aided Communications: Fitness Landscape Analysis and Niching Genetic Algorithm

Authors: Bai Yan, Qi Zhao, ** Zhang, J. Andrew Zhang, Xin Yao

Abstract: Reconfigurable Intelligent Surface (RIS) is a revolutionizing approach to provide cost-effective yet energy-efficient communications. The transmit beamforming of the base station (BS) and discrete phase shifts of the RIS are jointly optimized to provide high quality of service. However, existing works ignore the high dependence between the large number of phase shifts and estimate them separately,… ▽ More Reconfigurable Intelligent Surface (RIS) is a revolutionizing approach to provide cost-effective yet energy-efficient communications. The transmit beamforming of the base station (BS) and discrete phase shifts of the RIS are jointly optimized to provide high quality of service. However, existing works ignore the high dependence between the large number of phase shifts and estimate them separately, consequently, easily getting trapped into local optima. To investigate the number and distribution of local optima, we conduct a fitness landscape analysis on the sum rate maximization problems. Two landscape features, the fitness distribution correlation and autocorrelation, are employed to investigate the ruggedness of landscape. The investigation results indicate that the landscape exhibits a rugged, multi-modal structure, i.e., has many local peaks, particularly in the cases with large-scale RISs. To handle the multi-modal landscape structure, we propose a novel niching genetic algorithm to solve the sum rate maximization problem. Particularly, a niching technique, nearest-better clustering, is incorporated to partition the population into several neighborhood species, thereby locating multiple local optima and enhance the global search ability. We also present a minimum species size to further improve the convergence speed. Simulation results demonstrate that our method achieves significant capacity gains compared to existing algorithms, particularly in the cases with large-scale RISs. △ Less

Submitted 18 September, 2021; originally announced September 2021.

Journal ref: Applied Soft Computing, 2022, 131: 109725

Single-Target Real-Time Passive WiFi Tracking

Authors: Zhongqin Wang, J. Andrew Zhang, Min Xu, Y. Jay Guo

Abstract: Device-free human tracking is an essential ingredient for ubiquitous wireless sensing. Recent passive WiFi tracking systems face the challenges of inaccurate separation of dynamic human components and time-consuming estimation of multi-dimensional signal parameters. In this work, we present a scheme named WiFi Doppler Frequency Shift (WiDFS), which can achieve single-target real-time passive track… ▽ More Device-free human tracking is an essential ingredient for ubiquitous wireless sensing. Recent passive WiFi tracking systems face the challenges of inaccurate separation of dynamic human components and time-consuming estimation of multi-dimensional signal parameters. In this work, we present a scheme named WiFi Doppler Frequency Shift (WiDFS), which can achieve single-target real-time passive tracking using channel state information (CSI) collected from commercial-off-the-shelf (COTS) WiFi devices. We consider the typical system setup including a transmitter with a single antenna and a receiver with three antennas; while our scheme can be readily extended to another setup. To remove the impact of transceiver asynchronization, we first apply CSI cross-correlation between each RX antenna pair. We then combine them to estimate a Doppler frequency shift (DFS) in a short-time window. After that, we leverage the DFS estimate to separate dynamic human components from CSI self-correlation terms of each antenna, thereby separately calculating angle-of-arrival (AoA) and human reflection distance for tracking. In addition, a hardware calibration algorithm is presented to refine the spacing between RX antennas and eliminate the hardware-related phase differences between them. A prototype demonstrates that WiDFS can achieve real-time tracking with a median position error of 72.32 cm in multipath-rich environments. △ Less

Submitted 13 September, 2021; originally announced September 2021.

Integrating Low-Complexity and Flexible Sensing into Communication Systems

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Y. Jay Guo

Abstract: Integrating sensing into standardized communication systems can potentially benefit many consumer applications that require both radio frequency functions. However, without an effective sensing method, such integration may not achieve the expected gains of cost and energy efficiency. Existing sensing methods, which use communication payload signals, either have limited sensing performance or suffe… ▽ More Integrating sensing into standardized communication systems can potentially benefit many consumer applications that require both radio frequency functions. However, without an effective sensing method, such integration may not achieve the expected gains of cost and energy efficiency. Existing sensing methods, which use communication payload signals, either have limited sensing performance or suffer from high complexity. In this paper, we develop a novel and flexible sensing framework which has a complexity only dominated by a Fourier transform and also provides the flexibility in adapting for different sensing needs. We propose to segment a whole block of echo signal evenly into sub-blocks; adjacent ones are allowed to overlap. We design a virtual cyclic prefix (VCP) for each sub-block that allows us to employ two common ways of removing communication data symbols and generate two types of range-Doppler maps (RDMs) for sensing. We perform a comprehensive analysis of the signal components in the RDMs, proving that their interference-plus-noise (IN) terms are approximately Gaussian distributed. The statistical properties of the distributions are derived, which leads to the analytical comparisons between the two RDMs as well as between the prior and our sensing methods. Moreover, the impact of the lengths of sub-block, VCP and overlap** signal on sensing performance is analyzed. Criteria for designing these lengths for better sensing performance are also provided. Extensive simulations validate the superiority of the proposed sensing framework over prior methods in terms of signal-to-IN ratios in RDMs, detecting performance and flexibility. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: 14 pages

Gridless Evolutionary Approach for Line Spectral Estimation with Unknown Model Order

Authors: Bai Yan, Qi Zhao, ** Zhang, J. Andrew Zhang, Xin Yao

Abstract: Gridless methods show great superiority in line spectral estimation. These methods need to solve an atomic $l_0$ norm (i.e., the continuous analog of $l_0$ norm) minimization problem to estimate frequencies and model order. Since this problem is NP-hard to compute, relaxations of atomic $l_0$ norm, such as nuclear norm and reweighted atomic norm, have been employed for promoting sparsity. However,… ▽ More Gridless methods show great superiority in line spectral estimation. These methods need to solve an atomic $l_0$ norm (i.e., the continuous analog of $l_0$ norm) minimization problem to estimate frequencies and model order. Since this problem is NP-hard to compute, relaxations of atomic $l_0$ norm, such as nuclear norm and reweighted atomic norm, have been employed for promoting sparsity. However, the relaxations give rise to a resolution limit, subsequently leading to biased model order and convergence error. To overcome the above shortcomings of relaxation, we propose a novel idea of simultaneously estimating the frequencies and model order by means of the atomic $l_0$ norm. To accomplish this idea, we build a multiobjective optimization model. The measurment error and the atomic $l_0$ norm are taken as the two optimization objectives. The proposed model directly exploits the model order via the atomic $l_0$ norm, thus breaking the resolution limit. We further design a variable-length evolutionary algorithm to solve the proposed model, which includes two innovations. One is a variable-length coding and search strategy. It flexibly codes and interactively searches diverse solutions with different model orders. These solutions act as step**stones that help fully exploring the variable and open-ended frequency search space and provide extensive potentials towards the optima. Another innovation is a model order pruning mechanism, which heuristically prunes less contributive frequencies within the solutions, thus significantly enhancing convergence and diversity. Simulation results confirm the superiority of our approach in both frequency estimation and model order selection. △ Less

Submitted 14 June, 2021; originally announced June 2021.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Journal ref: IEEE Transactions on Cybernetics, 2022, early access

Multiobjective Bilevel Evolutionary Approach for Off-Grid Direction-of-Arrival Estimation

Authors: Bai Yan, Qi Zhao, ** Zhang, J. Andrew Zhang, Xin Yao

Abstract: The source number identification is an essential step in direction-of-arrival (DOA) estimation. Existing methods may provide a wrong source number due to inferior statistical properties (in low SNR or limited snapshots) or modeling errors (caused by relaxing sparse penalties), especially in impulsive noise. To address this issue, we propose a novel idea of simultaneous source number identification… ▽ More The source number identification is an essential step in direction-of-arrival (DOA) estimation. Existing methods may provide a wrong source number due to inferior statistical properties (in low SNR or limited snapshots) or modeling errors (caused by relaxing sparse penalties), especially in impulsive noise. To address this issue, we propose a novel idea of simultaneous source number identification and DOA estimation. We formulate a multiobjective off-grid DOA estimation model to realize this idea, by which the source number can be automatically identified together with DOA estimation. In particular, the source number is properly exploited by the $l_0$ norm of im**ing signals without relaxations, guaranteeing accuracy. Furthermore, we design a multiobjective bilevel evolutionary algorithm to solve the proposed model. The source number identification and sparse recovery are simultaneously optimized at the on-grid (lower) level. A forward search strategy is developed to further refine the grid at the off-grid (upper) level. This strategy does not need linear approximations and can eliminate the off-grid gap with low computational complexity. Simulation results demonstrate the outperformance of our method in terms of source number and root mean square error. △ Less

Submitted 14 June, 2021; originally announced June 2021.

Comments: This paper has been submitted to an Elsevier journal for peer-review

Journal ref: Applied Soft Computing, 2021(113):107954

A Low-Complexity Method for FFT-based OFDM Sensing

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Y. Jay Guo

Abstract: OFDM sensing is gaining increasing popularity in wideband radar applications as well as in joint communication and radar/radio sensing (JCAS). As JCAS will potentially be integrated into future mobile networks where OFDM is crucial, OFDM sensing is envisioned to be ubiquitously deployed. A fast Fourier transform (FFT) based OFDM sensing (FOS) method was proposed a decade ago and has been regarded… ▽ More OFDM sensing is gaining increasing popularity in wideband radar applications as well as in joint communication and radar/radio sensing (JCAS). As JCAS will potentially be integrated into future mobile networks where OFDM is crucial, OFDM sensing is envisioned to be ubiquitously deployed. A fast Fourier transform (FFT) based OFDM sensing (FOS) method was proposed a decade ago and has been regarded as a de facto standard given its simplicity. In this article, we introduce an easy trick -- a pre-processing on target echo -- to further reduce the computational complexity of FOS without degrading key sensing performance. Underlying the trick is a newly disclosed feature of the target echo in OFDM sensing which, to the best of our knowledge, has not been effectively exploited yet. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Comments: 10 pages, 4 pages; submitted for potential publication

Accurate Frequency Estimation with Fewer DFT Interpolations based on Padé Approximation

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Y. Jay Guo

Abstract: Frequency estimation is a fundamental problem in many areas. The well-known A&M and its variant estimators have established an estimation framework by iteratively interpolating the discrete Fourier transform (DFT) coefficients. In general, those estimators require two DFT interpolations per iteration, have uneven initial estimation performance against frequencies, and are incompetent for small sam… ▽ More Frequency estimation is a fundamental problem in many areas. The well-known A&M and its variant estimators have established an estimation framework by iteratively interpolating the discrete Fourier transform (DFT) coefficients. In general, those estimators require two DFT interpolations per iteration, have uneven initial estimation performance against frequencies, and are incompetent for small sample numbers due to low-order approximations involved. Exploiting the iterative estimation framework of A&M, we unprecedentedly introduce the Padé approximation to frequency estimation, unveil some features about the updating function used for refining the estimation in each iteration, and develop a simple closed-form solution to solving the residual estimation error. Extensive simulation results are provided, validating the superiority of the new estimator over the state-the-art estimators in wide ranges of key parameters. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Comments: 6 pages, 5 figures; accepted with minor revisions for publication as a Correspondence in the IEEE Transactions on Vehicular Technology

An Overview of Signal Processing Techniques for Joint Communication and Radar Sensing

Authors: J. Andrew Zhang, Fan Liu, Christos Masouros, Robert W. Heath Jr., Zhiyong Feng, Le Zheng, Athina Petropulu

Abstract: Joint communication and radar sensing (JCR) represents an emerging research field aiming to integrate the above two functionalities into a single system, sharing a majority of hardware and signal processing modules and, in a typical case, sharing a single transmitted signal. It is recognised as a key approach in significantly improving spectrum efficiency, reducing device size, cost and power cons… ▽ More Joint communication and radar sensing (JCR) represents an emerging research field aiming to integrate the above two functionalities into a single system, sharing a majority of hardware and signal processing modules and, in a typical case, sharing a single transmitted signal. It is recognised as a key approach in significantly improving spectrum efficiency, reducing device size, cost and power consumption, and improving performance thanks to potential close cooperation of the two functions. Advanced signal processing techniques are critical for making the integration efficient, from transmission signal design to receiver processing. This paper provides a comprehensive overview of JCR systems from the signal processing perspective, with a focus on state-of-the-art. A balanced coverage on both transmitter and receiver is provided for three types of JCR systems, communication-centric, radar-centric, and joint design and optimization. △ Less

Submitted 25 February, 2021; originally announced February 2021.

Comments: 18 pages, 3 figures, journal

Journal ref: IEEE Journal of Selected Topics in Signal Processing, 2021

Joint Estimation of Multipath Angles and Delays for Millimeter-Wave Cylindrical Arrays with Hybrid Front-ends

Authors: Zhipeng Lin, Tiejun Lv, Wei Ni, J. Andrew Zhang, Jie Zeng, Ren ** Liu

Abstract: Accurate channel parameter estimation is challenging for wideband millimeter-wave (mmWave) large-scale hybrid arrays, due to beam squint and much fewer radio frequency (RF) chains than antennas. This paper presents a novel joint delay and angle estimation approach for wideband mmWave fully-connected hybrid uniform cylindrical arrays. We first design a new hybrid beamformer to reduce the dimension… ▽ More Accurate channel parameter estimation is challenging for wideband millimeter-wave (mmWave) large-scale hybrid arrays, due to beam squint and much fewer radio frequency (RF) chains than antennas. This paper presents a novel joint delay and angle estimation approach for wideband mmWave fully-connected hybrid uniform cylindrical arrays. We first design a new hybrid beamformer to reduce the dimension of received signals on the horizontal plane by exploiting the convergence of the Bessel function, and to reduce the active beams in the vertical direction through preselection. The important recurrence relationship of the received signals needed for subspace-based angle and delay estimation is preserved, even with substantially fewer RF chains than antennas. Then, linear interpolation is generalized to reconstruct the received signals of the hybrid beamformer, so that the signals can be coherently combined across the whole band to suppress the beam squint. As a result, efficient subspace-based algorithm algorithms can be developed to estimate the angles and delays of multipath components. The estimated delays and angles are further matched and correctly associated with different paths in the presence of non-negligible noises, by putting forth perturbation operations. Simulations show that the proposed approach can approach the Cramér-Rao lower bound (CRLB) of the estimation with a significantly lower computational complexity than existing techniques. △ Less

Submitted 21 February, 2021; originally announced February 2021.

Comments: Accepted by IEEE Transactions on Wireless Communications, 15 pages, 7 figures

Low-Complexity Frequency Domain Equalization over Fast Fading Channels

Authors: Hongyang Zhang, Xiao**g Huang, J. Andrew Zhang

Abstract: Wireless communications over fast fading channels are challenging, requiring either frequent channel tracking or complicated signaling schemes such as orthogonal time frequency space (OTFS) modulation. In this paper, we propose low-complexity frequency domain equalizations to combat fast fading, based on novel discrete delay-time and frequency-Doppler channel models. Exploiting the circular stripe… ▽ More Wireless communications over fast fading channels are challenging, requiring either frequent channel tracking or complicated signaling schemes such as orthogonal time frequency space (OTFS) modulation. In this paper, we propose low-complexity frequency domain equalizations to combat fast fading, based on novel discrete delay-time and frequency-Doppler channel models. Exploiting the circular stripe diagonal nature of the frequency-Doppler channel matrix, we introduce low-complexity frequency domain minimum mean square error (MMSE) equalization for OTFS systems with fully resolvable Doppler spreads. We also demonstrate that the proposed MMSE equalization is applicable to conventional orthogonal frequency division multiplexing (OFDM) and single carrier frequency domain equalization (SC-FDE) systems with short signal frames and partially resolvable Doppler spreads. After generalizing the input-output data symbol relationship, we analyze the equalization performance via channel matrix eigenvalue decomposition and derive a closed-form expression for the theoretical bit-error-rate. Simulation results for OTFS, OFDM, and SC-FDE modulations verify that the proposed low-complexity frequency domain equalization methods can effectively exploit the time diversity over fast fading channels. Even with partially resolvable Doppler spread, the conventional SC-FDE can achieve performance close to OTFS, especially in fast fading channels with a dominating line-of-sight path. △ Less

Submitted 27 November, 2020; originally announced November 2020.

Waveform Optimization with Multiple Performance Metrics for Broadband Joint Communication and Radar Sensing

Authors: Zhitong Ni, J. Andrew Zhang, Kai Yang, Xiao**g Huang, Theodoros A. Tsiftsis

Abstract: Joint communication and radar sensing (JCAS) integrates communication and radar/radio sensing into one system, sharing one transmitted signal. In this paper, we investigate JCAS waveform optimization underlying communication signals, where a base station detects radar targets and communicates with mobile users simultaneously. We first develop individual novel waveform optimization problems for com… ▽ More Joint communication and radar sensing (JCAS) integrates communication and radar/radio sensing into one system, sharing one transmitted signal. In this paper, we investigate JCAS waveform optimization underlying communication signals, where a base station detects radar targets and communicates with mobile users simultaneously. We first develop individual novel waveform optimization problems for communications and sensing, respectively. For communications, we propose a novel lower bound of sum rate by integrating multi-user interference and effective channel gain into one metric that simplifies the optimization of the sum rate. For radar sensing, we consider optimizing one of two metrics, the mutual information or the Cramer-Rao bound. Then, we formulate the JCAS problem by optimizing the communication metric under different constraints of the radar metric, and we obtain both closed-form solutions and iterative solutions to the non-convex JCAS optimization problem. Numerical results are provided and verify the proposed optimization solutions. △ Less

Submitted 22 November, 2020; originally announced November 2020.

Uplink Sensing in Perceptive Mobile Networks with Asynchronous Transceivers

Authors: Zhitong Ni, J. Andrew Zhang, Xiao**g Huang, Kai Yang, **hong Yuan

Abstract: Perceptive mobile network (PMN) is a recently proposed next-generation network that integrates radar sensing into communication. One major challenge for realizing sensing in PMNs is how to deal with spatially-separated asynchronous transceivers. The asynchrony between sensing receiver and transmitter will cause both timing offsets (TOs) and carrier frequency offsets (CFOs) and lead to degraded sen… ▽ More Perceptive mobile network (PMN) is a recently proposed next-generation network that integrates radar sensing into communication. One major challenge for realizing sensing in PMNs is how to deal with spatially-separated asynchronous transceivers. The asynchrony between sensing receiver and transmitter will cause both timing offsets (TOs) and carrier frequency offsets (CFOs) and lead to degraded sensing accuracy in both ranging and velocity measurements. In this paper, we propose an uplink sensing scheme for PMNs with asynchronous transceivers, targeting at resolving the sensing ambiguity and improving the sensing accuracy. We first adopt a cross-antenna cross-correlation (CACC) operation to remove the sensing ambiguity associated with both TOs and CFOs. Without sensing ambiguity, both actual propagation delay and actual Doppler frequency of multiple targets can be obtained using CACC outputs. To exploit the redundancy of the CACC outputs and reduce the complexity, we then propose a novel mirrored-MUSIC algorithm, which halves the number of unknown parameters to be estimated, for obtaining actual values of delays and Doppler frequencies. Finally, we propose a high-resolution angles-of-arrival (AoAs) estimation algorithm, which jointly processes all measurements from spatial, temporal, and frequency domains. The proposed AoAs estimation algorithm can achieve significantly higher estimation accuracy than that of using samples from the spatial domain only. We also derive the theoretical mean-square-error of the proposed algorithms. Numerical results are provided and validate the effectiveness of the proposed scheme. △ Less

Submitted 18 November, 2020; originally announced November 2020.

Frequency-Hop** MIMO Radar-Based Communications: An Overview

Authors: Kai Wu, J. Andrew Zhang, Xiao**g Huang, Y. Jay Guo

Abstract: Enabled by the advancement in radio frequency technologies, the convergence of radar and communication systems becomes increasingly promising and is envisioned as a key feature of future 6G networks. Recently, the frequency-hop** (FH) MIMO radar is introduced to underlay dual-function radar-communication (DFRC) systems. Superior to many previous radar-centric DFRC designs, the symbol rate of FH-… ▽ More Enabled by the advancement in radio frequency technologies, the convergence of radar and communication systems becomes increasingly promising and is envisioned as a key feature of future 6G networks. Recently, the frequency-hop** (FH) MIMO radar is introduced to underlay dual-function radar-communication (DFRC) systems. Superior to many previous radar-centric DFRC designs, the symbol rate of FH-MIMO radar-based DFRC (FH-MIMO DFRC) can exceed the radar pulse repetition frequency. However, many practical issues, particularly those regarding effective data communications, are unexplored/unsolved. To promote the awareness and general understanding of the novel DFRC, this article is devoted to providing a timely introduction of FH-MIMO DFRC. We comprehensively review many essential aspects of the novel DFRC: channel/signal models, signaling strategies, modulation/demodulation processing and channel estimation methods, to name a few. We also highlight major remaining issues in FH-MIMO DFRC and suggest potential solutions to shed light on future research works. △ Less

Submitted 19 October, 2020; originally announced October 2020.

Comments: 9 pages, 8 figures