-
Direct imaging of shock wave splitting in diamond at Mbar pressures
Authors:
S. S. Makarov,
S. A. Dyachkov,
T. A. Pikuz,
K. Katagiri,
V. V. Zhakhovsky,
N. A. Inogamov,
V. A. Khokhlov,
A. S. Martynenko,
B. Albertazzi,
G. Rigon,
P. Mabey,
N. Hartley,
Y. Inubushi,
K. Miyanishi,
K. Sueda,
T. Togashi,
M. Yabashi,
T. Yabuuchi,
R. Kodama,
S. A. Pikuz,
M. Koenig,
N. Ozaki
Abstract:
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under me…
▽ More
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under megabar (Mbar) pressure, even a solid with high strength exhibits plastic properties, causing the shock wave to split in two. This phenomenon is described by theoretical models, but without direct experimental measurements to confirm them, their validity is still in doubt. Here, we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicron spatial resolution, using the unique capabilities of the X-ray free-electron laser. The direct measurements allowed, for the first time, the fitting and validation of a strength model for diamond in the range of several Mbar by performing continuum mechanics simulations in 2D geometry. The presented experimental approach to the study of shock waves in solids opens up new possibilities for the direct verification and construction of the equations of state of matter in the ultra-high pressure range, which are relevant for the solution of a variety of problems in high energy density physics.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Laser-induced electron dynamics and surface modification in ruthenium thin films
Authors:
Fedor Akhmetov,
Igor Milov,
Sergey Semin,
Fabio Formisano,
Nikita Medvedev,
Jacobus M. Sturm,
Vasily V. Zhakhovsky,
Igor A. Makhotkin,
Alexey Kimel,
Marcelo Ackermann
Abstract:
We performed the experimental and theoretical study of the heating and damaging of ruthenium thin films induced by femtosecond laser irradiation. Results of an optical pump-probe thermoreflectance experiment with rotating sample allowing to significantly reduce heat accumulation in irradiated spot are presented. We show the evolution of surface morphology from growth of a heat-induced oxide layer…
▽ More
We performed the experimental and theoretical study of the heating and damaging of ruthenium thin films induced by femtosecond laser irradiation. Results of an optical pump-probe thermoreflectance experiment with rotating sample allowing to significantly reduce heat accumulation in irradiated spot are presented. We show the evolution of surface morphology from growth of a heat-induced oxide layer at low and intermediate laser fluences to cracking and grooving at high fluences. Theoretical analysis of pump-probe signal allows us to relate behavior of hot electrons in ruthenium to the Fermi smearing mechanism. The analysis of heating is performed with the two-temperature modeling and molecular dynamics simulation, results of which demonstrate that the calculated melting threshold is higher than experimental damage threshold. We attribute it to heat-induced surface stresses leading to cracking which accumulates to more severe damage morphology. Our results provide an upper limit for operational conditions for ruthenium optics and also direct to further studies of the Fermi smearing mechanism in other transition metals.
△ Less
Submitted 22 June, 2022; v1 submitted 17 June, 2022;
originally announced June 2022.
-
Subsonic and supersonic gas flows to condensation surface
Authors:
A. P. Kryukov,
V. V. Zhakhovsky,
V. Yu. Levashov
Abstract:
Intense heat-mass transfer in a gas flow to a condensation surface is studied with the consistent atomistic and kinetic theory methods. The simple moment method is utilized for solving the Boltzmann kinetic equation (BKE) for the nonequilibrium gas flow and its condensation, while molecular dynamics (MD) simulation of a similar flow is used for verification of BKE results. We demonstrate that BKE…
▽ More
Intense heat-mass transfer in a gas flow to a condensation surface is studied with the consistent atomistic and kinetic theory methods. The simple moment method is utilized for solving the Boltzmann kinetic equation (BKE) for the nonequilibrium gas flow and its condensation, while molecular dynamics (MD) simulation of a similar flow is used for verification of BKE results. We demonstrate that BKE can provide the steady flow profiles close to those obtained from MD simulations in both subsonic and supersonic regimes of steady gas flows. Surprisingly, the elementary theory of condensation is shown with BKE results to have a good accuracy in a wide range of gas flow parameters.
MD confirms that a steady supersonic gas flow condensates on a surface at the distinctive temperature after formation of a standing shock front in reference to this surface, which can be interpreted as a permeable condensating piston. The last produces the shock compression but completely absorbs incoming gas flow in contrast to a common impermeable piston. The shock front divides the vapor flow on the supersonic and subsonic zones, and condensation of compressed gas happens in the subsonic regime. The complete and partial condensation regimes are discussed. It is shown that above the certain surface temperatures determined by the shock Hugoniot the runaway shock front stops an inflow gas and condensation is ceased.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Jet effusion from a metal droplet irradiated by a polarized ultrashort laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
P. M. Solyankin,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
C. -D. Ohl,
A. P. Shkurinov,
V. V. Medvedev
Abstract:
Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orienta…
▽ More
Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orientation is tied with polarization plane, rotation of which causes rotation of the cruciform jets by the same angle. To shed light on the experimental data we performed molecular dynamics simulation of droplet expansion induced by angle-dependent heating.
Our simulation shows that the jet directions are determined by an oriented angle-dependent energy distribution within a frontal hemisphere layer of droplet after absorption of linearly polarized light. As a result, the produced flow velocity field guided by surface tension forms two high-speed opposite jets oriented across the electric field vector as in our experiment.
A shock-wave pulse generated in the frontal layer has angle-dependent amplitude inherited from the oriented energy deposition. The release part of shock pulse produces a cavitation zone nearby the droplet center, and thus an expanding spherical shell is formed from the droplet. The flow velocities within a rearside hemisphere of the shell, produced after reflection of the shock wave from the rear side of droplet, generate two low-speed opposite jets oriented along the electric field vector. Thus we found that the cruciform jets are originated independently from the frontal and rear sides of droplet, and a pair of frontal jets is faster than a pair of rearside jets.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Laser ablation in liquid: bridge from a plasma stage to bubble formation
Authors:
N. A. Inogamov,
V. A. Khokhlov,
Yu. V. Petrov,
V. V. Zhakhovsky
Abstract:
Laser ablation through liquid is an important process that have to be studied for applications which use laser ablation in liquid (LAL) and laser shock peening (LSP). LAL is employed for production of suspensions of nanoparticles, while LSP is applied to increase hardness and fatique/corrosion resistance properties of a surface layer. A bubble appears in liquid around the laser spot focused at a t…
▽ More
Laser ablation through liquid is an important process that have to be studied for applications which use laser ablation in liquid (LAL) and laser shock peening (LSP). LAL is employed for production of suspensions of nanoparticles, while LSP is applied to increase hardness and fatique/corrosion resistance properties of a surface layer. A bubble appears in liquid around the laser spot focused at a target surface after strong enough laser pulse. In the paper we connect the early quasi-plane heated layer created by a pulse in liquid and the bubble forming at much later stages. In the previous works these early stage from one side and the late stage from another side existed mainly as independent entities. At least, quantitative links between them were unknown. We consider how the quasi-plane heated layer of liquid forms thank to thermal conduction, how gradually conduction becomes weaker, and how the heated layer of liquid nearly adiabatically expands to few orders of magnitude in volume during the drop of pressure. Our molecular dynamics simulations show that the heated layer is filled by the diffusive atomic metal-liquid mixture. Metal atoms began to condense into nanoparticles (NP) when they meet cold liquid outside the edge of a mixing zone. This process limits diffusive expansion of metal atoms, because diffusive ability of NP is less than this ability for individual atoms. Thus the mixture expands together with hot liquid, and the NPs approximately homogeneously fill an interior of a bubble.
△ Less
Submitted 20 October, 2019;
originally announced October 2019.
-
Liquid tin droplet fragmentation by ultra-short laser pulse
Authors:
S. Yu. Grigoryev,
S. A. Dyachkov,
V. A. Khokhlov,
V. V. Zhakhovsky,
A. N. Parshikov,
N. A. Inogamov
Abstract:
The fragmentation of a liquid metal droplet induced by a nanosecond laser pulse has been studied well. However, the fragmentation mechanism may be different, when a subpicosecond laser pulse is applied. To discover the details of the fragmentation process, we perform a hydrodynamic simulation of a liquid tin droplet irradiated by a femtosecond laser pulse. We have found that the pressure pulse ind…
▽ More
The fragmentation of a liquid metal droplet induced by a nanosecond laser pulse has been studied well. However, the fragmentation mechanism may be different, when a subpicosecond laser pulse is applied. To discover the details of the fragmentation process, we perform a hydrodynamic simulation of a liquid tin droplet irradiated by a femtosecond laser pulse. We have found that the pressure pulse induced by an instantaneous temperature growth in the skin layer propagates from the one side of the surface of a spherical droplet and focuses in its center; at the release a big cavity is formed at the center of a droplet; the pressure wave release at the backside surface may cause the spallation.
△ Less
Submitted 15 February, 2019; v1 submitted 15 December, 2018;
originally announced January 2019.
-
Condensation of laser produced gold plasma during expansion and cooling in water environment
Authors:
Yu. V. Petrov,
N. A. Inogamov,
V. V. Zhakhovsky,
V. A. Khokhlov
Abstract:
The ecologically best way to produce nanoparticles (NP) is based on laser ablation in liquid (LAL). In the considered here case the LAL means that a gold target is irradiated through transparent water. During and after irradiation the heated material from surface of a target forms a plume which expands into liquid.
In this paper we study a reach set of physical processes mixed with complicated h…
▽ More
The ecologically best way to produce nanoparticles (NP) is based on laser ablation in liquid (LAL). In the considered here case the LAL means that a gold target is irradiated through transparent water. During and after irradiation the heated material from surface of a target forms a plume which expands into liquid.
In this paper we study a reach set of physical processes mixed with complicated hydrodynamic phenomena which all accompany LAL. These theoretical and simulation investigations are very important for practical applications. Laser pulses with different durations $τ_L$ covering 5-th orders of magnitudes range from 0.1 ps to 0.5 ns and large absorbed fluences $F_{abs}$ near optical breakdown of liquid are compared. It is shown that the trajectory of the contact boundary with liquid at the middle and late stages after passing of the instant of maximum intensity of the longest pulse are rather similar for very different pulse durations (of course at comparable energies $F_{abs});$ we consider the pulses with a Gaussian temporal shape $I\propto \exp(-t^2/τ_L^2).$ We follow how hot (few eV range) dense gold plasma expands, cools down, intersects a saturation curve, and condenses into NPs.
These NPs appear first inside the water-gold diffusively mixed intermediate layer where gold vapor has the lowest temperature. Later in time pressure around the gold-water contact drops down below critical pressure for water. Thus NPs find themselves in gaseous water bubble where density of water gradually decreases to $10^{-4}-10^{-5}$ g/cm$\!^3$ at the instant of maximum expansion of a bubble.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Laser-induced ablation of metal in liquid
Authors:
Yu. V. Petrov,
V. A. Khokhlov,
V. V. Zhakhovsky,
N. A. Inogamov
Abstract:
Laser ablation in liquid (LAL) is important perspective way to compose nanoparticles (NP) necessary for modern technologies. LAL is not fully understood. Deep understanding is necessary to optimize processes and decrease high price of the LAL NPs.
Today there are two groups of studies: in one of them scientists go from analyzing of bubble dynamics (thus they proceed from the late stages), while…
▽ More
Laser ablation in liquid (LAL) is important perspective way to compose nanoparticles (NP) necessary for modern technologies. LAL is not fully understood. Deep understanding is necessary to optimize processes and decrease high price of the LAL NPs.
Today there are two groups of studies: in one of them scientists go from analyzing of bubble dynamics (thus they proceed from the late stages), while in another one scientists investigate early stages of ablation. In the present paper we consider the process as whole: from ablation and up to formation of a bubble and its inflation. Thus we cover extremely wide range of spatiotemporal scales. We consider role of absorbed energy and duration of pulse (femtosecond, multi-picosecond, nanosecond). Importance of supercritical states is emphasized. Diffusive atomic and hydrodynamic mixing due to Rayleigh-Taylor instability and their mutual interdependence are described. Liquid near contact with metal is heated by dissipation in strong shock and due to small but finite heat conduction in liquid; metal absorbing laser energy is hot and thus it serves as a heater for liquid. Spatial expansion and cooling of atomically mixed liquid and metal causes condensation of metal into NPs when pressure drops below critical pressure for metal. Development of bubble takes place during the next stages of decrease of pressure below critical parameters for liquid and below ambient pressure in liquid. Thin hot layer of liquid near contact expands in volume to many orders of magnitude filling the inflating bubble.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
Formation of solitary microstructure and ablation into transparent dielectric by a subnanosecond laser pulse
Authors:
V. A. Khokhlov,
N. A. Inogamov,
V. V. Zhakhovsky,
Yu. V. Petrov
Abstract:
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical mode…
▽ More
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical models and computer simulations by thermodynamic, hydrodynamic, and molecular dynamics codes in this direction. Absorbing light metal expanding into transparent solid or liquid dielectrics is considered. We analyze an interplay between diffusion, hydrodynamic instability, and decrease of surface tension down to zero value caused by strong heating and compression transferring matter into state of overcritical fluids. The primary NPs appear during expansion and cooling of diffusion zone when pressure in this zone drops below critical pressure for a metal. Long evolution from the overcritical states to states below a critical point for a metal and down to critical point of liquid and deeply down to surrounding pressure of 1 bar is followed. Conductive heating of liquid from hot metal is significant.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Expansion and fragmentation of liquid metal droplet by a short laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
D. K. Ilnitsky,
K. P. Migdal,
N. A. Inogamov,
A. Yu. Vinokhodov,
V. O. Kompanets,
Yu. V. Sidelnikov,
V. M. Krivtsun,
K. N. Koshelev,
V. V. Medvedev
Abstract:
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentati…
▽ More
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentation we perform simulation of liquid-tin droplet expansion produced by the initial conditions similar to those in experiment using the smoothed particle hydrodynamics (SPH) method. Simulation demonstrates that a thin heated surface layer generates a ultrashort shock wave propagating from the frontal side to rear side of the droplet. Convergence of such shock wave followed by a rarefaction tale to the droplet center results in the cavitation of material inside the central region by the strong tensile stress. Reflection of the shock wave from the rear side of droplet produces another region of highly stretched material where the spallation may occur producing a thin spallation layer moving with a velocity higher than expansion of the central shell after cavitation. It is shown both experimentally and numerically that the threshold laser intensity necessary for the spallation is higher than the threshold required to induce cavitation in the central region of droplet. Thus, the regime of asymmetrical expansion is realized if the laser intensity exceeds the spallation threshold. The transverse and longitudinal expansion velocities obtained in SPH simulations of different regimes of expansion are agreed well with our experimental data.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Parallel SPH modeling using dynamic domain decomposition and load balancing displacement of Voronoi subdomains
Authors:
M. S. Egorova,
S. A. Dyachkov,
A. N. Parshikov,
V. V. Zhakhovsky
Abstract:
A highly adaptive load balancing algorithm for parallel simulations using particle methods, such as molecular dynamics and smoothed particle hydrodynamics (SPH), is developed. Our algorithm is based on the dynamic spatial decomposition of simulated material samples between Voronoi subdomains, where each subdomain with all its particles is handled by a single computational process which is typicall…
▽ More
A highly adaptive load balancing algorithm for parallel simulations using particle methods, such as molecular dynamics and smoothed particle hydrodynamics (SPH), is developed. Our algorithm is based on the dynamic spatial decomposition of simulated material samples between Voronoi subdomains, where each subdomain with all its particles is handled by a single computational process which is typically run on a single CPU core of a multiprocessor computing cluster.
The algorithm displaces the positions of neighbor Voronoi subdomains in accordance with the local load imbalance between the corresponding processes. It results in particle transfers from heavy-loaded processes to less-loaded ones. Iteration of the algorithm puts into alignment the processor loads. Convergence to a well-balanced decomposition from imbalanced one is improved by the usage of multi-body terms in the balancing displacements.
The high adaptability of the balancing algorithm to simulation conditions is illustrated by SPH modeling of the dynamic behavior of materials under extreme conditions, which are characterized by large pressure and velocity gradients, as a result of which the spatial distribution of particles varies greatly in time. The higher parallel efficiency of our algorithm in such conditions is demonstrated by comparison with the corresponding static decomposition of the computational domain. Our algorithm shows almost perfect strong scalability in tests using from tens to several thousand processes.
△ Less
Submitted 8 June, 2018; v1 submitted 14 May, 2018;
originally announced May 2018.
-
Laser-induced Translative Hydrodynamic Mass Snapshots: map** at nanoscale
Authors:
X. W. Wang,
A. A. Kuchmizhak,
X. Li,
S. Juodkazis,
O. B. Vitrik,
Yu. N. Kulchin,
V. V. Zhakhovsky,
P. A. Danilov,
A. A. Ionin,
S. I. Kudryashov,
A. A. Rudenko,
N. A. Inogamov
Abstract:
Nanoscale thermally assisted hydrodynamic melt perturbations induced by ultrafast laser energy deposition in noble-metal films produce irreversible nanoscale translative mass redistributions and results in formation of radially-symmetric frozen surface structures. We demonstrate that the final three-dimensional (3D) shape of the surface structures formed after resolidification of the molten part o…
▽ More
Nanoscale thermally assisted hydrodynamic melt perturbations induced by ultrafast laser energy deposition in noble-metal films produce irreversible nanoscale translative mass redistributions and results in formation of radially-symmetric frozen surface structures. We demonstrate that the final three-dimensional (3D) shape of the surface structures formed after resolidification of the molten part of the film is shown to be governed by incident laser fluence and, more importantly, predicted theoretically via molecular dynamics modeling. Considering the underlying physical processes associated with laser-induced energy absorption, electron-ion energy exchange, acoustic relaxation and hydrodynamic flows, the theoretical approach separating slow and fast physical processes and combining hybrid analytical two-temperature calculations, scalable molecular-dynamics simulations, and a semi-analytical thin-shell model was shown to provide accurate prediction of the final nanoscale solidified morphologies, fully consistent with direct electron-microscopy visualization of nanoscale focused ion-beam cuts of the surface structures produced at different incident laser fluences. Finally, these results are in reasonable quantitative agreement with mass distribution profiles across the surface nanostructures, provided by their noninvasive and non-destructive nanoscale characterization based on energy-dispersive x-ray fluorescence spectroscopy, operating at variable electron-beam energies.
△ Less
Submitted 4 May, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Two-temperature equations of state for d-band metals irradiated by femtosecond laser pulses
Authors:
K. P. Migdal,
N. A. Inogamov,
Yu. V. Petrov,
V. V. Zhakhovsky
Abstract:
The cold curves for energy and pressure of Copper, Iron, and Tantalum were obtained using methods of the density functional theory. We consider hydrostatic and uniaxial deformations in the range from double compression of the initial volume per atom to double stretching. The presence of allotropic transformation from $α$ - phase of Iron to the hexaferrum with the growth of pressure is observed. In…
▽ More
The cold curves for energy and pressure of Copper, Iron, and Tantalum were obtained using methods of the density functional theory. We consider hydrostatic and uniaxial deformations in the range from double compression of the initial volume per atom to double stretching. The presence of allotropic transformation from $α$ - phase of Iron to the hexaferrum with the growth of pressure is observed. In the case of hydrostatic deformations we also have obtained analogous cold curves, but with non-zero electronic temperatures in the range up to 5 eV. The similar volume and electronic temperature ranges have been considered recently. The behavior of electronic internal energy, pressure, and density of states was investigated in the volume and temperature ranges called above. The maximum hydrostatic strains and the types of lattice instabilities were theoretically predicted for the considered metals. The influence of high electronic temperature on the electronic heat conductivity and electric resistivity has been provided for d-band metals by the approach based on the solution of Boltzmann kinetic equation in $τ$-approximation. This data is compared with the results of quantum molecular dynamics for Gold.
△ Less
Submitted 11 July, 2017; v1 submitted 2 February, 2017;
originally announced February 2017.
-
Simulations of short pulse laser-matter interaction
Authors:
N. A. Inogamov,
V. V. Zhakhovsky
Abstract:
Studies of ultra-fast laser-matter interaction are important for many applications. Such interaction triggers extreme physical processes which are localized in the range from $\sim 10$ nanometers to micron spatial scales and develo** within picosecond$-$nanosecond time range. Thus the experimental observations are difficult and methods of applied mathematics are necessary to understand these pro…
▽ More
Studies of ultra-fast laser-matter interaction are important for many applications. Such interaction triggers extreme physical processes which are localized in the range from $\sim 10$ nanometers to micron spatial scales and develo** within picosecond$-$nanosecond time range. Thus the experimental observations are difficult and methods of applied mathematics are necessary to understand these processes. Here we describe our simulation approaches and present solutions for a laser problem significant for applications. Namely, the processes of melting, a liquid jet formation, and its rupture are considered. Motion with the jet is caused by a short $\sim 0.1-1$ ps pulse illuminating a small spot on a surface of a thin $\sim 10-100$ nm film deposited onto substrate.
△ Less
Submitted 17 January, 2017;
originally announced January 2017.
-
Spallative ablation of dielectrics by X-ray laser
Authors:
N. A. Inogamov,
V. V. Zhakhovsky,
A. Ya. Faenov,
V. A. Khokhlov,
V. V. Shepelev,
I. Yu. Skobelev,
Y. Kato,
M. Tanaka,
T. A. Pikuz,
M. Kishimoto,
M. Ishino,
M. Nishikino,
Y. Fukuda,
S. V. Bulanov,
T. Kawachi,
Yu. V. Petrov,
S. I. Anisimov,
V. E. Fortov
Abstract:
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $τ_L$ is shorter than acoustic relaxation time $t_s$ is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless to wavelength. While the physics…
▽ More
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $τ_L$ is shorter than acoustic relaxation time $t_s$ is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless to wavelength. While the physics of electron-ion relaxation on wavelength and various electron spectra of substances: there are spectra with an energy gap in semiconductors and dielectrics opposed to gapless continuous spectra in metals. The paper describes entire sequence of thermomechanical processes from expansion, nucleation, foaming, and nanostructuring to spallation with particular attention to spallation by X-ray pulse.
△ Less
Submitted 21 December, 2009; v1 submitted 16 December, 2009;
originally announced December 2009.
