-
Mm-wave specific challenges in designing 5G transceiver architectures and air-interfaces
Authors:
Mythri Hunukumbure,
Jian Luo,
Mario Castaneda,
Raffaele DErrico,
Per Zetterberg,
Ali A. Zaidi,
Jaakko Vihriala,
Domenico Giustiniano
Abstract:
The mm-wave spectrum will be of significant importance to 5G mobile systems. There are multiple challenges in designing transceiver architectures and air interfaces in this spectrum. This paper is an attempt to explain some of these challenges and their interactions as means of enabling robust system design in near future.
The mm-wave spectrum will be of significant importance to 5G mobile systems. There are multiple challenges in designing transceiver architectures and air interfaces in this spectrum. This paper is an attempt to explain some of these challenges and their interactions as means of enabling robust system design in near future.
△ Less
Submitted 15 March, 2018;
originally announced March 2018.
-
Impact of Major RF Impairments on mm-wave Communications using OFDM Waveforms
Authors:
Yaning Zou,
Per Zetterberg,
Ulf Gustavsson,
Tommy Svensson,
Ali Zaidi,
Tobias Kadur,
Wolfgang Rave,
Gerhard Fettweis
Abstract:
In this paper, we study the joint impact of three major RF im-pairments, namely, oscillator phase noise, power amplifier non-linearity and I/Q imbalance on the performance of a mm-wave communication link based on OFDM modulation. General im-pairment models are first derived for describing the joint effects in each TX, each RX as well as a mm-wave communication link. Based on the obtained signal mo…
▽ More
In this paper, we study the joint impact of three major RF im-pairments, namely, oscillator phase noise, power amplifier non-linearity and I/Q imbalance on the performance of a mm-wave communication link based on OFDM modulation. General im-pairment models are first derived for describing the joint effects in each TX, each RX as well as a mm-wave communication link. Based on the obtained signal models and initial air interface de-sign from the mmMAGIC project, we numerically evaluate the impact of RF impairments on channel estimation in terms of channel-to-noise ratio (CNR) and also channel fluctuation due to common phase error (CPE) caused by phase noise within the channel coherence time. Then the impact on the link performance in terms of maximum sum rate is evaluated using extensive com-puter simulations. The simulation results show that the used air interface design is generally robust to the presence of RF impair-ments. With regard to the use of high order modulation alphabet and implementation of low-power and low-cost RF transceivers in mm-wave communication, special attention needs to be paid on phase noise where the inter-carrier-interference (ICI) can become a major limiting factor.
△ Less
Submitted 14 May, 2017;
originally announced May 2017.
-
Phase-Noise Mitigation in OFDM by Best Match Trajectories
Authors:
Senay Negusse,
Per Zetterberg,
Peter Händel
Abstract:
This paper proposes a novel approach to phase-noise compensation. The basic idea is to approximate the phase-noise statistics by a finite number of realizations, i.e., a phase-noise codebook. The receiver then uses an augmented received signal model, where the codebook index is estimated along with other parameters. The realization of the basic idea depends on the details of the air interface, the…
▽ More
This paper proposes a novel approach to phase-noise compensation. The basic idea is to approximate the phase-noise statistics by a finite number of realizations, i.e., a phase-noise codebook. The receiver then uses an augmented received signal model, where the codebook index is estimated along with other parameters. The realization of the basic idea depends on the details of the air interface, the phase-noise statistics, the propagation scenario and the computational constraints. In this paper, we will focus on a MQAM-OFDM system with pilot sub-carriers within each OFDM symbol. The channel is frequency selective, fading and unknown. A decision-feedback method is employed to further enhance performance of the system. Simulation results are shown for uncoded and coded systems to illustrate the performance of the algorithm, which is also compared with previously employed methods. Our simulations show that for a 16-QAM coded OFDM system over a frequency selective Rayleigh fading channel affected by phase noise with root-mean-square (RMS) of 14.4 degrees per OFDM symbol, the proposed algorithm is 1.5dB from the ideal phase-noise free case at a BER of $10^{-4}$. The performance of the best reference scheme is 2.5dB from the ideal case at BER of $10^{-4}$. The proposed scheme is also computationally attractive.
△ Less
Submitted 13 April, 2015;
originally announced April 2015.
-
Interference Alignment: Practical Challenges and Test-bed Implementation
Authors:
Nima Najari Moghadam,
Hamed Farhadi,
Per Zetterberg,
Majid Nasiri Khormuji,
Mikael Skoglund
Abstract:
Data traffic over wireless communication networks has experienced a tremendous growth in the last decade, and it is predicted to exponentially increase in the next decades. Enabling future wireless networks to fulfill this expectation is a challenging task both due to the scarcity of radio resources (e.g. spectrum and energy), and also the inherent characteristics of the wireless transmission medi…
▽ More
Data traffic over wireless communication networks has experienced a tremendous growth in the last decade, and it is predicted to exponentially increase in the next decades. Enabling future wireless networks to fulfill this expectation is a challenging task both due to the scarcity of radio resources (e.g. spectrum and energy), and also the inherent characteristics of the wireless transmission medium. Wireless transmission is in general subject to two phenomena: fading and interference. The elegant interference alignment concept reveals that with proper transmission signalling design, different interference signals can in fact be aligned together, such that more radio resources can be assigned to the desired transmission. Although interference alignment can achieve a larger data rate compared to orthogonal transmission strategies, several challenges should be addressed to enable the deployment of this technique in future wireless networks For instance, to perform interference alignment, normally, global channel state information (CSI) is required to be perfectly known at all terminals. Clearly, acquiring such channel knowledge is a challenging problem in practice and proper channel training and channel state feedback techniques need to be deployed. In addition, since the channels are time-varying proper adaptive transmission is needed. This chapter review recent advances in practical aspects of interference alignment. It also presents recent test-bed implementations of signal processing algorithms for the realization of interference alignment.
△ Less
Submitted 11 November, 2014; v1 submitted 10 November, 2014;
originally announced November 2014.
-
Interference Alignment (IA) and Coordinated Multi-Point (CoMP) overheads and RF impairments: testbed results
Authors:
Per Zetterberg
Abstract:
In this work we investigate the network MIMO techniques of interference alignment (IA) and fully adaptive joint transmission coordinated multipoint (CoMP) in an indoor very small cell environment. Our focus is on the overheads in a system with quantized channel state feedback from the receiver to the transmitter (based on the 802.11ac standard) and on the impact of non-ideal hardware. The indoor o…
▽ More
In this work we investigate the network MIMO techniques of interference alignment (IA) and fully adaptive joint transmission coordinated multipoint (CoMP) in an indoor very small cell environment. Our focus is on the overheads in a system with quantized channel state feedback from the receiver to the transmitter (based on the 802.11ac standard) and on the impact of non-ideal hardware. The indoor office scenario should be the most favourable case in terms of the required feedback rates due to the large coherence bandwidth and coherence time of the channel. The evaluations are done using a real-world wireless testbed with three BSs and three MSs all having two antennas. The signal to noise ratio in the measurements is very high, 35-60dB, due to the short transmission range. Under such conditions radio hardware impairments becomes a major limitation on the performance. We quantify the impact of these impairments. For a 23ms update interval the overhead is 2.5% and IA and CoMP improves the sum throughput 27% and 47% in average (over the reference schemes e.g. TDMA MIMO), under stationary conditions. When two people are walking in the measurement area the throughput improvements drops to 16% and 45%, respectively.
△ Less
Submitted 16 March, 2014; v1 submitted 14 January, 2014;
originally announced January 2014.
-
Interference Alignment (IA) and Coordinated Multi-Point (CoMP) with IEEE802.11ac feedback compression: testbed results
Authors:
Per Zetterberg
Abstract:
We have implemented interference alignment (IA) and joint transmission coordinated multipoint (CoMP) on a wireless testbed using the feedback compression scheme of the new 802.11ac standard. The performance as a function of the frequency domain granularity is assessed. Realistic throughput gains are obtained by probing each spatial modulation stream with ten different coding and modulation schemes…
▽ More
We have implemented interference alignment (IA) and joint transmission coordinated multipoint (CoMP) on a wireless testbed using the feedback compression scheme of the new 802.11ac standard. The performance as a function of the frequency domain granularity is assessed. Realistic throughput gains are obtained by probing each spatial modulation stream with ten different coding and modulation schemes. The gain of IA and CoMP over TDMA MIMO is found to be 26% and 71%, respectively under stationary conditions. In our dense indoor office deployment, the frequency domain granularity of the feedback can be reduced down to every 8th subcarrier (2.5MHz), without sacrificing performance.
△ Less
Submitted 19 February, 2014; v1 submitted 5 November, 2013;
originally announced November 2013.
-
Capacity Limits and Multiplexing Gains of MIMO Channels with Transceiver Impairments
Authors:
Emil Björnson,
Per Zetterberg,
Mats Bengtsson,
Björn Ottersten
Abstract:
The capacity of ideal MIMO channels has a high-SNR slope that equals the minimum of the number of transmit and receive antennas. This letter analyzes if this result holds when there are distortions from physical transceiver impairments. We prove analytically that such physical MIMO channels have a finite upper capacity limit, for any channel distribution and SNR. The high-SNR slope thus collapses…
▽ More
The capacity of ideal MIMO channels has a high-SNR slope that equals the minimum of the number of transmit and receive antennas. This letter analyzes if this result holds when there are distortions from physical transceiver impairments. We prove analytically that such physical MIMO channels have a finite upper capacity limit, for any channel distribution and SNR. The high-SNR slope thus collapses to zero. This appears discouraging, but we prove the encouraging result that the relative capacity gain of employing MIMO is at least as large as with ideal transceivers.
△ Less
Submitted 1 May, 2014; v1 submitted 18 September, 2012;
originally announced September 2012.
-
Optimal Coordinated Beamforming in the Multicell Downlink with Transceiver Impairments
Authors:
Emil Björnson,
Per Zetterberg,
Mats Bengtsson
Abstract:
Physical wireless transceivers suffer from a variety of impairments that distort the transmitted and received signals. Their degrading impact is particularly evident in modern systems with multiuser transmission, high transmit power, and low-cost devices, but their existence is routinely ignored in the optimization literature for multicell transmission. This paper provides a detailed analysis of c…
▽ More
Physical wireless transceivers suffer from a variety of impairments that distort the transmitted and received signals. Their degrading impact is particularly evident in modern systems with multiuser transmission, high transmit power, and low-cost devices, but their existence is routinely ignored in the optimization literature for multicell transmission. This paper provides a detailed analysis of coordinated beamforming in the multicell downlink. We solve two optimization problems under a transceiver impairment model and derive the structure of the optimal solutions. We show numerically that these solutions greatly reduce the impact of impairments, compared with beamforming developed for ideal transceivers. Although the so-called multiplexing gain is zero under transceiver impairments, we show that the gain of multiplexing can be large at practical SNRs.
△ Less
Submitted 4 September, 2012;
originally announced September 2012.
-
An Experimental Investigation of SIMO, MIMO, Interference-Alignment (IA) and Coordinated Multi-Point (CoMP)
Authors:
Per Zetterberg,
Nima N. Moghadam
Abstract:
In this paper we present experimental implementations of interference alignment (IA) and coordinated multi-point transmission (CoMP). We provide results for a system with three base-stations and three mobile-stations all having two antennas. We further employ OFDM modulation, with high-order constellations, and measure many positions both line-of-sight and non-line-of-sight under interference limi…
▽ More
In this paper we present experimental implementations of interference alignment (IA) and coordinated multi-point transmission (CoMP). We provide results for a system with three base-stations and three mobile-stations all having two antennas. We further employ OFDM modulation, with high-order constellations, and measure many positions both line-of-sight and non-line-of-sight under interference limited conditions. We find the CoMP system to perform better than IA at the cost of a higher back-haul capacity requirement. During the measurements we also logged the channel estimates for off-line processing. We use these channel estimates to calculate the performance under ideal conditions. The performance estimates obtained this way is substantially higher than what is actually observed in the end-to-end transmissions---in particular in the CoMP case where the theoretical performance is very high. We find the reason for this discrepancy to be the impact of dirty-RF effects such as phase-noise and non-linearities. We are able to model the dirty-RF effects to some extent. These models can be used to simulate more complex systems and still account for the dirty-RF effects (e.g., systems with tens of mobiles and base-stations). Both IA and CoMP perform better than reference implementations of single-user SIMO and MIMO in our measurements.
△ Less
Submitted 15 November, 2011;
originally announced November 2011.