-
Post-melting encapsulation of glass microwires for multipath light waveguiding within phosphate glasses
Authors:
I. Konidakis,
F. Dragosli,
A. Cheruvathoor Poulose,
J. Kašlík,
A. Bakandristos,
R. Zboril,
E. Stratakis
Abstract:
Glass waveguides remain the fundamental component of advanced photonic circuits and with a significant role in other applications such as quantum information processing, light generation, imaging, data storage, and sensing platforms. Up to date, the fabrication of glass waveguides relies mainly on demanding chemical processes or on the employment of expensive ultrafast laser equipment. In this wor…
▽ More
Glass waveguides remain the fundamental component of advanced photonic circuits and with a significant role in other applications such as quantum information processing, light generation, imaging, data storage, and sensing platforms. Up to date, the fabrication of glass waveguides relies mainly on demanding chemical processes or on the employment of expensive ultrafast laser equipment. In this work, we demonstrate the feasibility of a simple, low-temperature, post-melting encapsulation procedure for the development of advanced glass waveguides. Namely, silver iodide phosphate glass microwires (MWs) are drawn from typical splat-quenched samples. Following this, the MWs are incorporated in a controlled manner within previously prepared transparent silver phosphate glass rectangular prisms. The composition of the employed glasses is chosen so that the host phosphate glass has a lower refractive index than the embedded MWs. In such case, the waveguide mechanism relies on the propagation of light inside the encapsulated higher refractive index MWs. Moreover, the presence of silver nanoparticles within the MWs enhances the light transmission due to scattering effects. Waveguide devices with either one or two incorporated MWs were fabricated. Remarkably, in the latter case, the transmission of light of different colors and in multipath direction is possible, rendering the developed waveguides outstanding candidates for various photonic circuits, optoelectronic, and smart sign glass applications.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Defect engineering over anisotropic brookite towards substrate-specific photo-oxidation of alcohols
Authors:
S. M. Hossein Hejazi,
Mahdi Shahrezaei,
Piotr Błoński,
Mattia Allieta,
Polina M. Sheverdyaeva,
Paolo Moras,
Zdeněk Baďura,
Sergii Kalytchuk,
Elmira Mohammadi,
Radek Zbořil,
Štěpán Kment,
Michal Otyepka,
Alberto Naldoni,
Paolo Fornasiero
Abstract:
Generally adopted design strategies for enhancing the photocatalytic activity are aimed at tuning properties such as the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The defective anisotropic brookite TiO2 photocatalyst f…
▽ More
Generally adopted design strategies for enhancing the photocatalytic activity are aimed at tuning properties such as the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The defective anisotropic brookite TiO2 photocatalyst functionalized with Pt nanocrystals are tested for alcohol photoreforming showing up to an 11-fold increase in methanol oxidation rate, compared to the unreduced one, whilst presenting much lower ethanol or isopropanol specific oxidation rates. We demonstrate that the alcohol oxidation and hydrogen evolution reactions are tightly related, and when the substrate-specific alcohol oxidation ability is increased, the hydrogen evolution is significantly boosted. The reduced anisotropic brookite shows up to twenty-six-fold higher specific photoactivity with respect to anatase and brookite with isotropic nanocrystals, reflecting the different type of defective catalytic sites formed depending on the TiO2 polymorph and its crystal shape. Advanced in-situ characterizations and theoretical investigations reveal that controlled engineering over oxygen vacancies and lattice strain produces large electron polarons hosting the substrate-specific active sites for alcohol photo-oxidation.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Nanoporous AuPt and AuPtAg alloy co-catalysts formed by dewetting-dealloying on ordered TiO2 nanotube surface lead to significantly enhanced photocatalytic H2 generation
Authors:
Nhat Truong Nguyen,
Selda Ozkan,
Ondrej Tomanec,
Xuemei Zhou,
Radek Zboril,
Patrik Schmuki
Abstract:
Effective co-catalysts are of key importance for photocatalytic H2 generation from aqueous environments. An attractive co-catalyst candidate are AuPt (metastable) alloys due to the synergistic electronic and chemical interaction of the constituents in the charge transfer and H2 evolution process. Here we introduce the fabrication of AuPt alloy nanoparticles with nanoporosity (pore size of 2-5 nm)…
▽ More
Effective co-catalysts are of key importance for photocatalytic H2 generation from aqueous environments. An attractive co-catalyst candidate are AuPt (metastable) alloys due to the synergistic electronic and chemical interaction of the constituents in the charge transfer and H2 evolution process. Here we introduce the fabrication of AuPt alloy nanoparticles with nanoporosity (pore size of 2-5 nm) fabricated on spaced TiO2 nanotubes. By dewetting a layered AgAuPt coating, we form AuPtAg alloy nanoparticles. From these alloys, Ag can selectively be dissolved leading to the desired nanoporous AuPt alloy particles with diameter in the range of 10-70 nm deposited as a gradient on the TiO2 nanotubes. A significant enhancement of photocatalytic H2 generation is obtained compared to the same loading of monometallic or nonporous alloy. The nanoporous AuPt particles provide not only a large surface area to volume ratio (and are thus more effective) but also show the intrinsic synergy of a AuPt alloy for H2 generation.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Amorphous Mo-Ta oxide nanotubes for long-term stable Mo oxide based supercapacitors
Authors:
Bowen **,
Seyedsina Hejazi,
Florian Pyczak,
Michael Oehring,
Shiva Mohajernia,
Stepan Kment,
Ondrej Tomanec,
Radek Zboril,
Nhat Truong Nguyen,
Min Yang,
Patrik Schmuki
Abstract:
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aque…
▽ More
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aqueous electrolytes prevents a practical use in high capacitance devices. In this work, we describe how to overcome this severe stability issue by forming amorphous molybdenum oxide/tantalum oxide nanotubes by anodic oxidation of a Mo-Ta alloy. The presence of a critical amount of Ta-oxide (> 20 at-%) prevents the electrochemical decay of the MoO3 phase and thus yields an extremely high stability. Due to the protection provided by tantalum oxide, no capacitance losses are measureable after 10000 charg-ing/discharging cycles.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Photoanodes Based on TiO$_2$ and $α$-Fe$_2$O$_3$ for Solar Water Splitting Superior Role of 1D Nanoarchitectures and of Combined Heterostructures
Authors:
Stepan Kment,
Francesca Riboni,
Sarka Pausova,
Lei Wang,
Lingyun Wang,
Hyungkyu Han,
Zdenek Hubicka,
Josef Krysa,
Patrik Schmuki,
Radek Zboril
Abstract:
Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO$_2$) and iron oxide (hematite, $α$-Fe$_2$O$_3$) are among the most investigated candidates as photoanode…
▽ More
Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO$_2$) and iron oxide (hematite, $α$-Fe$_2$O$_3$) are among the most investigated candidates as photoanode materials, mainly owing to their resistance to photocorrosion, non-toxicity, natural abundance, and low production cost. Major drawbacks are, however, an inherently low electrical conductivity and a limited hole diffusion length that significantly affect the performance of TiO$_2$ and $α$-Fe$_2$O$_3$ in PEC devices. To this regard, one-dimensional (1D) nanostructuring is typically applied as it provides several superior features such as a significant enlargement of the material surface area, extended contact between the semiconductor and the electrolyte and, most remarkably, preferential electrical transport that overall suppress charge carrier recombination and improve TiO$_2$ and $α$-Fe$_2$O$_3$ photo-electrocatalytic properties. The present review describes various synthetic methods, properties and PEC applications of 1D-photoanodes (nanotubes, nanorods, nanofibers, nanowires) based on titania, hematite, and on $α$-Fe$_2$O$_3$/TiO$_2$ heterostructures. Various routes towards modification and enhancement of PEC activity of 1D photoanodes are also discussed including do**, decoration with co-catalysts and heterojunction engineering. Finally, the challenges related to the optimization of charge transfer kinetics in both oxides are highlighted.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Influence of Ti$_3^+$ Defect-type on Heterogeneous Photocatalytic H$_2$ Evolution Activity of TiO$_2$
Authors:
Shiva Mohajernia,
Pavlina Andryskova,
Giorgio Zoppellaro,
Seyedsina Hejazi,
Stepan Kment,
Radek Zboril,
Patrik Schmuki
Abstract:
Reduced titanium dioxide has recently attracted large attention, particularly for its unique co-catalyst-free H$_2$ heterogeneous photocatalytic application. The enhanced photocatalytic activity of the reduced TiO$_2$ was previously ascribed to the introduction of point crystal defects (mainly Ti$_3^+$ centers), which result in the formation of intrinsic co-catalytic centers and enhanced visible l…
▽ More
Reduced titanium dioxide has recently attracted large attention, particularly for its unique co-catalyst-free H$_2$ heterogeneous photocatalytic application. The enhanced photocatalytic activity of the reduced TiO$_2$ was previously ascribed to the introduction of point crystal defects (mainly Ti$_3^+$ centers), which result in the formation of intrinsic co-catalytic centers and enhanced visible light absorption. In this work, we systematically investigate the effect of different defects in the TiO$_{2-x}$ lattice on photocatalytic H$_2$ evolution. To introduce different types of defects, thermal annealing in air (oxidative), Ar (inert), Ar/H$_2$ (reducing), and H$_2$ (reducing) atmospheres were performed on commercially available anatase nanopowder. Then, the powders were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) to clarify the effect of treatment on material properties. Furthermore, the defect types were characterized by electron paramagnetic resonance (EPR) spectroscopy. We show that thermal annealing in different atmospheres can form different amounts of different defect types in the TiO$_2$ structure. The highest photocatalytic activation is achieved by annealing the anatase powder in a reducing atmosphere for an appropriate temperature/annealing time. By combining the results from H$_2$ generation and EPR analysis we show that the simultaneous presence of two types of defects, i.e. surface exposed Ti$_3^+$ and lattice embedded Ti$_3^+$ centers, in an optimum low concentration, is the determining factor for an optimized photocatalytic H$_2$ evolution rate. In fact, annealing anatase powder under the so-reported optimized conditions in reducing atmosphere leads to the generation of a considerable amount of H$_2$, with rates as high as 338 $μ$molh-1g-1.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Forming a highly active, homogeneously alloyed AuPt co-catalyst decoration on O2 nanotubes directly during anodic growth
Authors:
Haidong Bian,
Nhat Truong Nguyen,
JeongEun Yoo,
Seyedsina Hejazi,
Shiva Mohajernia,
Julian Mueller,
Erdmann Spiecker,
Hiroaki Tsuchiya,
Ondrej Tomanec,
Beatriz E. Sanabria-Arenas,
Radek Zboril,
Yang Yang Li,
Patrik Schmuki
Abstract:
Au and Pt do not form homogeneous bulk alloys as they are thermodynamically not miscible. However, we show that anodic TiO$_2$ nanotubes (NTs) can in-situ be uniformly decorated with homogeneous AuPt alloy nanoparticles (NPs) during their anodic growth. For this, a metallic Ti substrate containing low amounts of dissolved Au (0.1 at%) and Pt (0.1 at%) is used for anodizing. The matrix metal (Ti) i…
▽ More
Au and Pt do not form homogeneous bulk alloys as they are thermodynamically not miscible. However, we show that anodic TiO$_2$ nanotubes (NTs) can in-situ be uniformly decorated with homogeneous AuPt alloy nanoparticles (NPs) during their anodic growth. For this, a metallic Ti substrate containing low amounts of dissolved Au (0.1 at%) and Pt (0.1 at%) is used for anodizing. The matrix metal (Ti) is converted to oxide while at the oxide/metal interface direct noble metal particle formation and alloying of Au and Pt takes place; continuously these particles are then picked up by the growing nanotube wall. In our experiments the AuPt alloy NPs have an average size of 4.2 nm and, at the end of the anodic process, are regularly dispersed over the TiO$_2$ nanotubes. These alloyed AuPt particles act as excellent co-catalyst in photocatalytic H2 generation - with a H2 production of 12.04 μL h-1 under solar light. This represents a strongly enhanced activity as compared with TiO$_2$ NTs decorated with monometallic particles of Au (7 μL h-1) or Pt (9.96 μL h-1).
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Templated Dewetting-Alloying of NiCu Bilayers on TiO$_2$ Nanotubes Enables Efficient Noble Metal-Free Photocatalytic $H_2$ Evolution
Authors:
Davide Spanu,
Sandro Recchia,
Shiva Mohajernia,
Ondrei Tomanec,
Stepan Kment,
Radek Zboril,
Patrik Schmukia,
Marco Altomare
Abstract:
Photocatalytic $H_2$ evolution reactions on pristine TiO$_2$ is characterized by low efficiencies due to trap** and recombination of charge carriers, and due to a sluggish kinetics of electron transfer. Noble metal (mainly Pt, Pd, Au) nanoparticles are typically decorated as cocatalyst on the TiO$_2$ surface to reach reasonable photocatalytic yields. However, owing to the high cost of noble meta…
▽ More
Photocatalytic $H_2$ evolution reactions on pristine TiO$_2$ is characterized by low efficiencies due to trap** and recombination of charge carriers, and due to a sluggish kinetics of electron transfer. Noble metal (mainly Pt, Pd, Au) nanoparticles are typically decorated as cocatalyst on the TiO$_2$ surface to reach reasonable photocatalytic yields. However, owing to the high cost of noble metals, alternative metal cocatalysts are being developed. Here we introduce an approach to fabricate an efficient noble metal free photocatalytic platform for $H_2$ evolution based on alloyed NiCu cocatalytic nanoparticles at the surface of anodic TiO$_2$ nanotube arrays. NiCu bilayers are deposited onto the TiO$_2$ nanotubes by plasma sputtering. A subsequent thermal treatment is carried out that leads to dewetting, that is, owing to surface diffusion the Ni and Cu sputtered layers simultaneously mix with each other and split into NiCu nanoparticles at the nanotube surface. The approach allows for a full control over key features of the alloyed nanoparticles such as their composition, work function and cocatalytic ability towards $H_2$ generation. Dewetted-alloyed cocatalytic nanoparticles composed of equal Ni and Cu amounts not only are significantly more reactive than pure Ni or Cu nanoparticles, but also lead to $H_2$ generation rates that can be comparable to those obtained by conventional noble metal (Pt) decoration of TiO$_2$ nanotube arrays.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Tailoring topological order and π-conjugation to engineer quasi-metallic polymers
Authors:
B. Cirera,
A. Sánchez-Grande,
B. de la Torre,
J. Santos,
S. Edalatmanesh,
E. Rodríguez-Sánchez,
K. Lauwaet,
B. Mallada-Faes,
R. Zbořil,
R. Miranda,
O. Gröning,
P. Jelínek,
N. Martín,
D. Écija
Abstract:
Topological band theory provides a conceptual framework to predict or even engineer robust metallic states at the boundaries of topologically distinct phases. The bulk-boundary correspondence requires that a topological electronic phase transition between two insulators must proceed via closing of the electronic gap. Therefore, it can provide a conceptual solution to the instability of metallic ph…
▽ More
Topological band theory provides a conceptual framework to predict or even engineer robust metallic states at the boundaries of topologically distinct phases. The bulk-boundary correspondence requires that a topological electronic phase transition between two insulators must proceed via closing of the electronic gap. Therefore, it can provide a conceptual solution to the instability of metallic phases in π-conjugated 1D polymers. In this work we predict and demonstrate that a clever design and on-surface synthesis of polymers consisting of 1D linearly bridged polyacene moieties, can position the resulting polymer near the topological transition from a trivial to a non-trivial quantum phase featuring a very narrow bandgap with in-gap zero-energy edge-states at the topologically non-trivial phase. We also reveal the fundamental connection between topological classes and electronic transformation of 1D π-conjugated polymers.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
On-Surface Structural and Electronic Properties of Spontaneously Formed Tb$_2$Pc$_3$ Single Molecule Magnets
Authors:
Jack Hellerstedt,
Aleš Cahlík,
Martin Švec,
Bruno de la Torre,
María Moro-Lagares,
Barbora Papoušková,
Giorgio Zoppellaro,
**o Mutombo,
Mario Ruben,
Radek Zbořil,
Pavel Jelinek
Abstract:
The single molecule magnet (SMM) bis(phthalocyaninato)terbium (III) (TbPc$_2$) has attracted steady research attention as an exemplar system for realizing molecule-based spin electronics. In this paper, we report on the spontaneous formation of Tb$_2$Pc$_3$ species from TbPc$_2$ precursors via sublimation in ultrahigh vacuum (UHV) onto an Ag(111) surface. The molecules on the surface are inspected…
▽ More
The single molecule magnet (SMM) bis(phthalocyaninato)terbium (III) (TbPc$_2$) has attracted steady research attention as an exemplar system for realizing molecule-based spin electronics. In this paper, we report on the spontaneous formation of Tb$_2$Pc$_3$ species from TbPc$_2$ precursors via sublimation in ultrahigh vacuum (UHV) onto an Ag(111) surface. The molecules on the surface are inspected using combined scanning tunneling (STM) and non-contact atomic force microscopies (nc-AFM) at 5 Kelvin. Submolecular resolution and height dependent measurements supported by density functional theory (DFT) calculations unambiguously show the presence of both TbPc$_2$ and Tb$_2$Pc$_3$ species. The synthesis of Tb$_2$Pc$_3$ species under UHV conditions is independently confirmed by chemical analysis. The high-resolution AFM imaging allows us to register the orientation of the topmost Pc ligand in both Tb$_2$Pc$_3$ and TbPc$_2$ relative to the underlying Ag(111) surface. Measurements of the electronic structure reveal the selective appearance of a Kondo signature with temperature $\sim$ 30K in the Tb$_2$Pc$_3$ species, localized to the Pc ligand lobes. We attribute the presence of the Kondo resonance on select Tb$_2$Pc$_3$ molecules to the orientation of internal molecular ligands. High-resolution AFM imaging identifies geometric distortions between Tb$_2$Pc$_3$ molecules with and without the Kondo effect, the result of the complex interplay between structural and electronic differences.
△ Less
Submitted 10 May, 2018;
originally announced May 2018.
-
Submolecular resolution by variation of IETS amplitude and its relation to AFM/STM signal
Authors:
Bruno de la Torre,
Martin Švec,
Giuseppe Foti,
Ondřej Krejčí,
Prokop Hapala,
Aran Garcia-Lekue,
Thomas Frederiksen,
Radek Zbořil,
Andrés Arnau,
Héctor Vázquez,
Pavel Jelínek
Abstract:
Here we show scanning tunnelling microscopy (STM), non-contact atomic force microscopy (AFM) and inelastic electron tunnelling spectroscopy (IETS) measurements on organic molecule with a CO- terminated tip at 5K. The high-resolution contrast observed simultaneously in all channels unam- biguously demonstrates the common imaging mechanism in STM/AFM/IETS, related to the lateral bending of the CO-fu…
▽ More
Here we show scanning tunnelling microscopy (STM), non-contact atomic force microscopy (AFM) and inelastic electron tunnelling spectroscopy (IETS) measurements on organic molecule with a CO- terminated tip at 5K. The high-resolution contrast observed simultaneously in all channels unam- biguously demonstrates the common imaging mechanism in STM/AFM/IETS, related to the lateral bending of the CO-functionalized tip. The IETS spectroscopy reveals that the submolecular con- trast at 5K consists of both renormalization of vibrational frequency and variation of the amplitude of IETS signal. This finding is also corroborated by first principles simulations. We extend accord- ingly the probe-particle AFM/STM/IETS model to include these two main ingredients necessary to reproduce the high-resolution IETS contrast. We also employ the first principles simulations to get more insight into different response of frustrated translation and rotational modes of CO-tip during imaging.
△ Less
Submitted 17 October, 2017;
originally announced October 2017.
-
Space weathering simulations through controlled growth of iron nanoparticles on olivine
Authors:
T. Kohout,
J. Čuda,
J. Filip,
D. Britt,
T. Bradley,
J. Tuček,
R. Skála,
G. Kletetschka,
J. Kašlík,
O. Malina,
K. Šišková,
R. Zbořil
Abstract:
Airless planetary bodies are directly exposed to space weathering. The main spectral effects of space weathering are darkening, reduction in intensity of silicate mineral absorption bands, and an increase in the spectral slope towards longer wavelengths (reddening). Production of nanophase metallic iron (npFe$^{0}$) during space weathering plays major role in these spectral changes. A laboratory p…
▽ More
Airless planetary bodies are directly exposed to space weathering. The main spectral effects of space weathering are darkening, reduction in intensity of silicate mineral absorption bands, and an increase in the spectral slope towards longer wavelengths (reddening). Production of nanophase metallic iron (npFe$^{0}$) during space weathering plays major role in these spectral changes. A laboratory procedure for the controlled production of npFe$^{0}$ in silicate mineral powders has been developed. The method is based on a two-step thermal treatment of low-iron olivine, first in ambient air and then in hydrogen atmosphere. Through this process, a series of olivine powder samples was prepared with varying amounts of npFe$^{0}$ in the 7-20 nm size range. A logarithmic trend is observed between amount of npFe$^{0}$ and darkening, reduction of 1 μm olivine absorption band, reddening, and 1 μm band width. Olivine with a population of physically larger npFe$^{0}$ particles follows spectral trends similar to other samples, except for the reddening trend. This is interpreted as the larger, ~40-50 nm sized, npFe$^{0}$ particles do not contribute to the spectral slope change as efficiently as the smaller npFe$^{0}$ fraction. A linear trend is observed between the amount of npFe$^{0}$ and 1 μm band center position, most likely caused by Fe$^{2+}$ disassociation from olivine structure into npFe$^{0}$ particles.
△ Less
Submitted 14 May, 2014; v1 submitted 10 April, 2014;
originally announced April 2014.
-
Band gaps and structural properties of graphene halides and their derivates: A hybrid functional study with localized orbital basis sets
Authors:
František Karlický,
Radek Zbořil,
Michal Otyepka
Abstract:
DFT calculations of the electronic structure of graphane and stoichiometrically halogenated graphene derivatives (fluorographene and other analogous graphene halides) show (i) localized orbital basis sets can be successfully and effectively used for such 2D materials; (ii) several functionals predict that the band gap of graphane is greater than that of fluorographene, whereas HSE06 gives the oppo…
▽ More
DFT calculations of the electronic structure of graphane and stoichiometrically halogenated graphene derivatives (fluorographene and other analogous graphene halides) show (i) localized orbital basis sets can be successfully and effectively used for such 2D materials; (ii) several functionals predict that the band gap of graphane is greater than that of fluorographene, whereas HSE06 gives the opposite trend; (iii) HSE06 functional predicts quite good values of band gaps w.r.t benchmark theoretical and experimental data; (iv) the zero band gap of graphene is opened by hydrogenation and halogenation and strongly depends on the chemical composition of mixed graphene halides; (v) the stability of graphene halides decreases sharply with increasing size of the halogen atom - fluorographene is stable, whereas graphene iodide spontaneously decomposes. In terms of band gap and stability, the C2FBr, and C2HBr derivatives seem to be promising materials, e.g., for (opto)electronics applications, because their band gaps are similar to those of conventional semiconductors, and they are expected to be stable under ambient conditions. The results indicate that other fluorinated compounds (CaHbFc and CaFbYc, Y = Cl, Br, I) are stable insulators.
△ Less
Submitted 19 September, 2012;
originally announced September 2012.