Showing 1–50 of 126 results for author: Zanetti, M

The Mu2e crystal and SiPM calorimeter: construction status

Authors: Nikolay Atanov, Vladimir Baranov, Leo Borrel, Caterina Bloise, Julian Budagov, Sergio Ceravol, Franco Cervelli, Francesco Colao, Marco Cordelli, Giovanni Corradi, Yuri Davydov, Stefano Di Falco, Eleonora Diociaiuti, Simone Donati, Bertrand Echenard, Carlo Ferrari, Ruben Gargiulo, Antonio Gioiosa, Simona Giovannella, Valerio Giusti, Vladimir Glagolev, Francesco Grancagnolo, Dariush Hampai, Fabio Happacher, David Hitlin , et al. (15 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilitie… ▽ More The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilities and an online trigger filter while improving the track reconstruction, requiring better than 10% energy and 500 ps timing resolutions for 100 MeV electrons. In this paper, we present the status of construction and the Quality Control (QC) performed on the produced crystals and photosensors, the development of the rad-hard electronics, and the most important results of the irradiation tests. Construction of the mechanics is also reported. Status and plans for the calorimeter assembly and its first commissioning are described. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 70, NO. 7, 2023

Triggerless data acquisition pipeline for Machine Learning based statistical anomaly detection

Authors: Gaia Grosso, Nicolò Lai, Matteo Migliorini, Jacopo Pazzini, Andrea Triossi, Marco Zanetti, Alberto Zucchetta

Abstract: This work describes an online processing pipeline designed to identify anomalies in a continuous stream of data collected without external triggers from a particle detector. The processing pipeline begins with a local reconstruction algorithm, employing neural networks on an FPGA as its first stage. Subsequent data preparation and anomaly detection stages are accelerated using GPGPUs. As a practic… ▽ More This work describes an online processing pipeline designed to identify anomalies in a continuous stream of data collected without external triggers from a particle detector. The processing pipeline begins with a local reconstruction algorithm, employing neural networks on an FPGA as its first stage. Subsequent data preparation and anomaly detection stages are accelerated using GPGPUs. As a practical demonstration of anomaly detection, we have developed a data quality monitoring application using a cosmic muon detector. Its primary objective is to detect deviations from the expected operational conditions of the detector. This serves as a proof-of-concept for a system that can be adapted for use in large particle physics experiments, enabling anomaly detection on datasets with reduced bias. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Technical Design Report for the LUXE Experiment

Authors: H. Abramowicz, M. Almanza Soto, M. Altarelli, R. Aßmann, A. Athanassiadis, G. Avoni, T. Behnke, M. Benettoni, Y. Benhammou, J. Bhatt, T. Blackburn, C. Blanch, S. Bonaldo, S. Boogert, O. Borysov, M. Borysova, V. Boudry, D. Breton, R. Brinkmann, M. Bruschi, F. Burkart, K. Büßer, N. Cavanagh, F. Dal Corso, W. Decking , et al. (109 additional authors not shown)

Abstract: This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger fiel… ▽ More This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger field and beyond. The further implications for the search of physics beyond the Standard Model are also discussed. △ Less

Submitted 2 August, 2023; v1 submitted 1 August, 2023; originally announced August 2023.

Fast kernel methods for Data Quality Monitoring as a goodness-of-fit test

Authors: Gaia Grosso, Nicolò Lai, Marco Letizia, Jacopo Pazzini, Marco Rando, Lorenzo Rosasco, Andrea Wulzer, Marco Zanetti

Abstract: We here propose a machine learning approach for monitoring particle detectors in real-time. The goal is to assess the compatibility of incoming experimental data with a reference dataset, characterising the data behaviour under normal circumstances, via a likelihood-ratio hypothesis test. The model is based on a modern implementation of kernel methods, nonparametric algorithms that can learn any c… ▽ More We here propose a machine learning approach for monitoring particle detectors in real-time. The goal is to assess the compatibility of incoming experimental data with a reference dataset, characterising the data behaviour under normal circumstances, via a likelihood-ratio hypothesis test. The model is based on a modern implementation of kernel methods, nonparametric algorithms that can learn any continuous function given enough data. The resulting approach is efficient and agnostic to the type of anomaly that may be present in the data. Our study demonstrates the effectiveness of this strategy on multivariate data from drift tube chamber muon detectors. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 16 pages, 7 figures

The Analytical Method algorithm for trigger primitives generation at the LHC Drift Tubes detector

Authors: G. Abbiendi, J. Alcaraz Maestre, A. Álvarez Fernández, B. Álvarez González, N. Amapane, I. Bachiller, L. Barcellan, C. Baldanza, C. Battilana, M. Bellato, G. Bencze, M. Benettoni, N. Beni, A. Benvenuti, A. Bergnoli, L. C. Blanco Ramos, L. Borgonovi, A. Bragagnolo, V. Cafaro, A. Calderon, E. Calvo, R. Carlin, C. A. Carrillo Montoya, F. R. Cavallo, J. M. Cela Ruiz , et al. (121 additional authors not shown)

Abstract: The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the s… ▽ More The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the signals will be forwarded asynchronously to the service cavern at full resolution. The new backend system will be in charge of building the trigger primitives of each chamber. These trigger primitives contain the information at chamber level about the muon candidates position, direction, and collision time, and are used as input in the L1 CMS trigger. The added functionalities will improve the robustness of the system against ageing. An algorithm based on analytical solutions for reconstructing the DT trigger primitives, called Analytical Method, has been implemented both as a software C++ emulator and in firmware. Its performance has been estimated using the software emulator with simulated and real data samples, and through hardware implementation tests. Measured efficiencies are 96 to 98\% for all qualities and time and spatial resolutions are close to the ultimate performance of the DT chambers. A prototype chain of the HL-LHC electronics using the Analytical Method for trigger primitive generation has been installed during Long Shutdown 2 of the LHC and operated in CMS cosmic data taking campaigns in 2020 and 2021. Results from this validation step, the so-called Slice Test, are presented. △ Less

Submitted 3 February, 2023; originally announced February 2023.

Comments: 16 pages, 11 figures

A fast and flexible machine learning approach to data quality monitoring

Authors: Gaia Grosso, Nicolò Lai, Marco Letizia, Jacopo Pazzini, Marco Rando, Andrea Wulzer, Marco Zanetti

Abstract: We present a machine learning based approach for real-time monitoring of particle detectors. The proposed strategy evaluates the compatibility between incoming batches of experimental data and a reference sample representing the data behavior in normal conditions by implementing a likelihood-ratio hypothesis test. The core model is powered by recent large-scale implementations of kernel methods, n… ▽ More We present a machine learning based approach for real-time monitoring of particle detectors. The proposed strategy evaluates the compatibility between incoming batches of experimental data and a reference sample representing the data behavior in normal conditions by implementing a likelihood-ratio hypothesis test. The core model is powered by recent large-scale implementations of kernel methods, nonparametric learning algorithms that can approximate any continuous function given enough data. The resulting algorithm is fast, efficient and agnostic about the type of potential anomaly in the data. We show the performance of the model on multivariate data from a drift tube chambers muon detector. △ Less

Submitted 10 March, 2023; v1 submitted 21 January, 2023; originally announced January 2023.

Comments: Accepted at the NeurIPS 2022 workshop: Machine Learning and the Physical Sciences. Full version at arXiv:2303.05413

Mid-infrared bi-directional reflectance spectroscopy of impact melt glasses and tektites

Authors: Andreas Morlok, Aleksandra N. Stojic, Iris Weber, Harald Hiesinger, Michael Zanetti, Joern Helbert

Abstract: We have analyzed 14 impact melt glass samples, covering the compositional range from highly felsic to mafic/basaltic, as part of our effort to provide mid-infrared spectra (7-14 micron) for MERTIS (Mercury Radiometer and Thermal Infrared Spectrometer), an instrument onboard of the ESA/JAXA BepiColombo mission. Since Mercury was exposed to many impacts in its history, and impact glasses are also… ▽ More We have analyzed 14 impact melt glass samples, covering the compositional range from highly felsic to mafic/basaltic, as part of our effort to provide mid-infrared spectra (7-14 micron) for MERTIS (Mercury Radiometer and Thermal Infrared Spectrometer), an instrument onboard of the ESA/JAXA BepiColombo mission. Since Mercury was exposed to many impacts in its history, and impact glasses are also common on other bodies, powders of tektites (Irghizite, Libyan Desert Glass, Moldavite, Muong Nong, Thailandite) and impact glasses (from the Dellen, El'gygytgyn, Lonar, Mien, Mistastin, and Popigai impact structures) were analyzed in four size fractions of (0-25, 25-63, 93-125 and 125-250 micron) from 2.5 to 19 micron in bi-directional reflectance. The characteristic Christiansen Feature (CF) is identified between 7.3 micron (Libyan Desert Glass) and 8.2 micron (Dellen). Most samples show mid-infrared spectra typical of highly amorphous material, dominated by a strong Reststrahlen Band (RB) between 8.9 micron (Libyan Desert Glass) and 10.3 micron (Dellen). Even substantial amounts of mineral fragments hardly affect this general band shape. Comparisons of the SiO2 content representing the felsic/mafic composition of the samples with the CF shows felsic/intermediate glass and tektites forming a big group, and comparatively mafic samples a second one. An additional sign of a highly amorphous state is the lack of features at wavelengths longer than about 15 micron. The tektites and two impact glasses, Irghizite and El'gygytgyn respectively, have much weaker water features than most of the other impact glasses. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Journal ref: Icarus (2016) volume 278, 162-179

Simulating noisy quantum channels via quantum state preparation algorithms

Authors: Marcelo S. Zanetti, Douglas F. Pinto, Marcos L. W. Basso, Jonas Maziero

Abstract: In Refs. [Phys. Rev. A 96, 062303 (2017)] and [Sci. China Phys. Mech. Astron. 61, 70311 (2018)], the authors reported an algorithm to simulate, in a circuit-based quantum computer, a general quantum channel (QC). However, the application of their algorithm is limited because it entails the solution of intricate non-linear systems of equations in order to obtain the quantum circuit to be implemente… ▽ More In Refs. [Phys. Rev. A 96, 062303 (2017)] and [Sci. China Phys. Mech. Astron. 61, 70311 (2018)], the authors reported an algorithm to simulate, in a circuit-based quantum computer, a general quantum channel (QC). However, the application of their algorithm is limited because it entails the solution of intricate non-linear systems of equations in order to obtain the quantum circuit to be implemented for the simulation. Motivated by this issue, in this article we identify and discuss a simple way to implement the simulation of QCs on any $d$-level quantum system through quantum state preparation algorithms, that have received much attention in the quantum information science literature lately. We exemplify the versatility of our protocol applying it to most well known qubit QCs, to some qudit QCs, and to simulate the effect of Lorentz transformations on spin states. We also regard the application of our protocol for initial mixed states. Most of the given application examples are demonstrated using IBM's quantum computers. △ Less

Submitted 2 May, 2023; v1 submitted 28 December, 2022; originally announced December 2022.

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 56, 115501 (2023)

Simulation of positive operator-valued measures and quantum instruments via quantum state preparation algorithms

Authors: Douglas F. Pinto, Marcelo S. Zanetti, Marcos L. W. Basso, Jonas Maziero

Abstract: In Ref. [Phys. Rev. A 100, 062317 (2019)], the authors reported an algorithm to implement, in a circuit-based quantum computer, a general quantum measurement (GQM) of a two-level quantum system, a qubit. Even though their algorithm seems right, its application involves the solution of an intricate non-linear system of equations in order to obtain the angles determining the quantum circuit to be im… ▽ More In Ref. [Phys. Rev. A 100, 062317 (2019)], the authors reported an algorithm to implement, in a circuit-based quantum computer, a general quantum measurement (GQM) of a two-level quantum system, a qubit. Even though their algorithm seems right, its application involves the solution of an intricate non-linear system of equations in order to obtain the angles determining the quantum circuit to be implemented for the simulation. In this article, we identify and discuss a simple way to circumvent this issue and implement GQMs on any $d$-level quantum system through quantum state preparation algorithms. Using some examples for one qubit, one qutrit and two qubits, we illustrate the easy of application of our protocol. Besides, we show how one can utilize our protocol for simulating quantum instruments, for which we also give an example. All our examples are demonstrated using IBM's quantum processors. △ Less

Submitted 9 February, 2023; v1 submitted 29 November, 2022; originally announced November 2022.

Journal ref: Phys. Rev. A 107, 022411 (2023)

Learning new physics efficiently with nonparametric methods

Authors: Marco Letizia, Gianvito Losapio, Marco Rando, Gaia Grosso, Andrea Wulzer, Maurizio Pierini, Marco Zanetti, Lorenzo Rosasco

Abstract: We present a machine learning approach for model-independent new physics searches. The corresponding algorithm is powered by recent large-scale implementations of kernel methods, nonparametric learning algorithms that can approximate any continuous function given enough data. Based on the original proposal by D'Agnolo and Wulzer (arXiv:1806.02350), the model evaluates the compatibility between exp… ▽ More We present a machine learning approach for model-independent new physics searches. The corresponding algorithm is powered by recent large-scale implementations of kernel methods, nonparametric learning algorithms that can approximate any continuous function given enough data. Based on the original proposal by D'Agnolo and Wulzer (arXiv:1806.02350), the model evaluates the compatibility between experimental data and a reference model, by implementing a hypothesis testing procedure based on the likelihood ratio. Model-independence is enforced by avoiding any prior assumption about the presence or shape of new physics components in the measurements. We show that our approach has dramatic advantages compared to neural network implementations in terms of training times and computational resources, while maintaining comparable performances. In particular, we conduct our tests on higher dimensional datasets, a step forward with respect to previous studies. △ Less

Submitted 5 April, 2022; originally announced April 2022.

Comments: 22 pages, 13 figures

Mu2e-II: Muon to electron conversion with PIP-II

Authors: K. Byrum, S. Corrodi, Y. Oksuzian, P. Winter, L. Xia, A. W. J. Edmonds, J. P. Miller, J. Mott, W. J. Marciano, R. Szafron, R. Bonventre, D. N. Brown, Yu. G. Kolomensky, O. Ning, V. Singh, E. Prebys, L. Borrel, B. Echenard, D. G. Hitlin, C. Hu, D. X. Lin, S. Middleton, F. C. Porter, L. Zhang, R. -Y. Zhu , et al. (83 additional authors not shown)

Abstract: An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for exa… ▽ More An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for examining the process on additional target materials. Mu2e-II is a proposed upgrade to Mu2e, with at least an additional order of magnitude in sensitivity to the conversion rate over Mu2e. The approach and challenges for this proposal are summarized. Mu2e-II may be regarded as the next logical step in a continued high-intensity muon program at FNAL. △ Less

Submitted 16 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021 46 pages 43 figures 7 tables

Report number: 20220310: [CONF-22-123]

The $D_sDK^*$ vertex in QCD Sum Rules: form factors and coupling constant

Authors: A. Cerqueira Jr, B. Osório Rodrigues, M. E. Bracco, C. M. Zanetti

Abstract: In this work we study the meson vertex $D_sDK^*$ using the QCD sum rules. We compute the three point correlation functions for the three cases of different off-shell mesons. The form factors for each case are fitted to the numerical calculation of the correlation functions and the coupling constant of the vertex is obtained by comparing the form factors at their respective off-shell meson pole.… ▽ More In this work we study the meson vertex $D_sDK^*$ using the QCD sum rules. We compute the three point correlation functions for the three cases of different off-shell mesons. The form factors for each case are fitted to the numerical calculation of the correlation functions and the coupling constant of the vertex is obtained by comparing the form factors at their respective off-shell meson pole. The result obtained for the coupling constant is $g_{D_sDK^*} = 2.29^{+0.65}_{-0.41}$. △ Less

Submitted 6 December, 2021; originally announced December 2021.

Comments: 21 pages, 5 figures

Journal ref: Braz J Phys 52, 12 (2022)

Learning New Physics from an Imperfect Machine

Authors: Raffaele Tito d'Agnolo, Gaia Grosso, Maurizio Pierini, Andrea Wulzer, Marco Zanetti

Abstract: We show how to deal with uncertainties on the Standard Model predictions in an agnostic new physics search strategy that exploits artificial neural networks. Our approach builds directly on the specific Maximum Likelihood ratio treatment of uncertainties as nuisance parameters for hypothesis testing that is routinely employed in high-energy physics. After presenting the conceptual foundations of o… ▽ More We show how to deal with uncertainties on the Standard Model predictions in an agnostic new physics search strategy that exploits artificial neural networks. Our approach builds directly on the specific Maximum Likelihood ratio treatment of uncertainties as nuisance parameters for hypothesis testing that is routinely employed in high-energy physics. After presenting the conceptual foundations of our method, we first illustrate all aspects of its implementation and extensively study its performances on a toy one-dimensional problem. We then show how to implement it in a multivariate setup by studying the impact of two typical sources of experimental uncertainties in two-body final states at the LHC. △ Less

Submitted 26 November, 2021; originally announced November 2021.

A horizontally scalable online processing system for trigger-less data acquisition

Authors: Matteo Migliorini, Jacopo Pazzini, Andrea Triossi, Marco Zanetti, Alberto Zucchetta

Abstract: The majority of high energy physics experiments rely on data acquisition and hardware-based trigger systems performing a number of stringent selections before storing data for offline analysis. The online reconstruction and selection performed at the trigger level are bound to the synchronous nature of the data acquisition system, resulting in a trade-off between the amount of data collected and t… ▽ More The majority of high energy physics experiments rely on data acquisition and hardware-based trigger systems performing a number of stringent selections before storing data for offline analysis. The online reconstruction and selection performed at the trigger level are bound to the synchronous nature of the data acquisition system, resulting in a trade-off between the amount of data collected and the complexity of the online reconstruction performed. Exotic physics processes, such as long-lived and slow-moving particles, are rarely targeted by online triggers as they require complex and nonstandard online reconstruction, usually incompatible with the time constraints of most data acquisition systems. The online trigger selection can thus impact as one of the main limiting factors to the experimental reach for exotic signatures. Alternative data acquisition solutions based on the continuous and asynchronous processing of the stream of data from the detectors are therefore foreseeable. Trigger-less data readout systems, paired with efficient streaming data processing solutions, can provide a viable alternative. In this document, an end-to-end implementation of a fully trigger-less data acquisition and online processing system is discussed. An easily scalable and deployable implementation of such an architecture is proposed, based on open-source distributed computing frameworks capable of performing asynchronous online processing of streaming data. The proposed schema can be suitable for deployment as a fully integrated system for small-scale experimental apparatus, or to complement the trigger-based data acquisition systems of larger experiments. A muon telescope setup consisting of a set of gaseous detectors is used as the experimental development testbed in this work, and a fully integrated online processing pipeline deployed on cloud computing resources is implemented and described. △ Less

Submitted 8 March, 2022; v1 submitted 9 November, 2021; originally announced November 2021.

Comments: 8 pages, 7 figures

A novel measurement of initial-state gluon radiation in hadron collisions using Drell-Yan events

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (375 additional authors not shown)

Abstract: A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γ^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In… ▽ More A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γ^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In a data sample corresponding to an integrated luminosity of 9.4 fb$^{-1}$ collected with the CDF Run II detector, $<p_T^{DY}>$ is measured as a function of the Z/$γ^*$ invariant mass. It is found that these two observables have a dependence, $<p_T^{DY}> = -8 + 2.2 \ln m_{DY}^2$ [GeV/c], where $m_{DY}$ is the value of the Z/$γ^*$ mass measured in units of GeV/$c^2$. This linear dependence is observed for the first time in this analysis. It may be exploited to model the effect of ISR and constrain its impact in other processes. △ Less

Submitted 28 October, 2021; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: 14 pages, 14 figures

Measurement of the charge asymmetry of electrons from the decays of $W$ bosons produced in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (376 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eν$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eν) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton mome… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eν$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eν) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton momentum carried by the quarks. This paper reports on the measurement of the electron-charge asymmetry using the full data set recorded by the Collider Detector at Fermilab in 2001--2011 and corresponding to 9.1~fb$^{-1}$ of integrated luminosity. The measurement significantly improves the precision of the Tevatron constraints on the parton-distribution functions of the proton. Numerical tables of the measurement are provided. △ Less

Submitted 2 November, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: 27 pages, 25 figures. To be published in PRD

Report number: FERMILAB-PUB-21-293-E

Muon detection in electron-positron annihilation for muon collider studies

Authors: N. Amapane, M. Antonelli, F. Anulli, G. Ballerini, L. Bandiera, N. Bartosik, M. Bauce, A. Bertolin, C. Biino, O. R. Blanco- Garcia, M. Boscolo, C. Brizzolari, A. Cappati, F. Casaburo, M. Casarsa, G. Cavoto, G. Cesarini, F. Collamati, G. Cotto, C. Curatolo, R. Di Nardo, F. Gonella, S. Hoh, M. Iafrati, F. Iacoangeli , et al. (21 additional authors not shown)

Abstract: The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,… ▽ More The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,the Low EMittance Muon Accelerator (LEMMA) collaboration has explored the muon pair production close to its kinematic threshold by annihilating 45 GeV positrons with electrons in a low Z material target. In this configuration, muons are emerging from the target with a naturally low-emittance. In this paper we describe the performance of a system, to study this production mechanism, that consists in several segmented absorbers with alternating active layers composed of fast Cherenkov detectors together with a muon identification technique based on this detector. Passive layers were made of tungsten. We collected data corresponding to muon and electron beams produced at the H2 line in the North Area of the European Organization for Nuclear Research (CERN) in September 2018. △ Less

Submitted 31 October, 2021; v1 submitted 26 May, 2021; originally announced May 2021.

Muon trigger with fast Neural Networks on FPGA, a demonstrator

Authors: Matteo Migliorini, Jacopo Pazzini, Andrea Triossi, Marco Zanetti, Alberto Zucchetta

Abstract: The online reconstruction of muon tracks in High Energy Physics experiments is a highly demanding task, typically performed with programmable logic boards, such as FPGAs. Complex analytical algorithms are executed in a quasi-real-time environment to identify, select and reconstruct local tracks in often noise-rich environments. A novel approach to the generation of local triggers based on an hybri… ▽ More The online reconstruction of muon tracks in High Energy Physics experiments is a highly demanding task, typically performed with programmable logic boards, such as FPGAs. Complex analytical algorithms are executed in a quasi-real-time environment to identify, select and reconstruct local tracks in often noise-rich environments. A novel approach to the generation of local triggers based on an hybrid combination of Artificial Neural Networks and analytical methods is proposed, targeting the muon reconstruction for drift tube detectors. The proposed algorithm exploits Neural Networks to solve otherwise computationally expensive analytical tasks for the unique identification of coherent signals and the removal of the geometrical ambiguities. The proposed approach is deployed on state-of-the-art FPGA and its performances are evaluated on simulation and on data collected from cosmic rays. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Comments: 14 pages, 13 figures

Storage Rings and Gravitational Waves: Summary and Outlook

Authors: A. Berlin, M. Brüggen, O. Buchmueller, P. Chen, R. T. D'Agnolo, R. Deng, J. R. Ellis, S. Ellis, G. Franchetti, A. Ivanov, J. M. Jowett, A. P. Kobushkin, S. Y. Lee, J. Liske, K. Oide, S. Rao, J. Wenninger, M. Wellenzohn, M. Zanetti, F. Zimmermann

Abstract: We report some highlights from the ARIES APEC workshop on ``Storage Rings and Gravitational Waves'' (SRGW2021), held in virtual space from 2 February to 18 March 2021, and sketch a tentative landscape for using accelerators and associated technologies for the detection or generation of gravitational waves. We report some highlights from the ARIES APEC workshop on ``Storage Rings and Gravitational Waves'' (SRGW2021), held in virtual space from 2 February to 18 March 2021, and sketch a tentative landscape for using accelerators and associated technologies for the detection or generation of gravitational waves. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Comments: 17 pages, 9 figures, highlights from the ARIES APEC workshop on "Storage Rings and Gravitational Waves"(SRGW2021)

Report number: KCL-PH-TH/2021-28, CERN-TH-2021-068

Conceptual Design Report for the LUXE Experiment

Authors: Halina Abramowicz, Uwe Hernandez Acosta, Massimo Altarelli, Ralph Assmann, Zhaoyu Bai, Ties Behnke, Yan Benhammou, Thomas Blackburn, Stewart Boogert, Oleksandr Borysov, Maryna Borysova, Reinhard Brinkmann, Marco Bruschi, Florian Burkart, Karsten Büßer, Niall Cavanagh, Oz Davidi, Winfried Decking, Umberto Dosselli, Nina Elkina, Alexander Fedotov, Miroslaw Firlej, Tomasz Fiutowski, Kyle Fleck, Mikhail Gostkin , et al. (66 additional authors not shown)

Abstract: This Conceptual Design Report describes LUXE (Laser Und XFEL Experiment), an experimental campaign that aims to combine the high-quality and high-energy electron beam of the European XFEL with a powerful laser to explore the uncharted terrain of quantum electrodynamics characterised by both high energy and high intensity. We will reach this hitherto inaccessible regime of quantum physics by analys… ▽ More This Conceptual Design Report describes LUXE (Laser Und XFEL Experiment), an experimental campaign that aims to combine the high-quality and high-energy electron beam of the European XFEL with a powerful laser to explore the uncharted terrain of quantum electrodynamics characterised by both high energy and high intensity. We will reach this hitherto inaccessible regime of quantum physics by analysing high-energy electron-photon and photon-photon interactions in the extreme environment provided by an intense laser focus. The physics background and its relevance are presented in the science case which in turn leads to, and justifies, the ensuing plan for all aspects of the experiment: Our choice of experimental parameters allows (i) effective field strengths to be probed at and beyond the Schwinger limit and (ii) a precision to be achieved that permits a detailed comparison of the measured data with calculations. In addition, the high photon flux predicted will enable a sensitive search for new physics beyond the Standard Model. The initial phase of the experiment will employ an existing 40 TW laser, whereas the second phase will utilise an upgraded laser power of 350 TW. All expectations regarding the performance of the experimental set-up as well as the expected physics results are based on detailed numerical simulations throughout. △ Less

Submitted 27 July, 2021; v1 submitted 3 February, 2021; originally announced February 2021.

Report number: DESY 21-016

Learning Multivariate New Physics

Authors: Raffaele Tito D'Agnolo, Gaia Grosso, Maurizio Pierini, Andrea Wulzer, Marco Zanetti

Abstract: We discuss a method that employs a multilayer perceptron to detect deviations from a reference model in large multivariate datasets. Our data analysis strategy does not rely on any prior assumption on the nature of the deviation. It is designed to be sensitive to small discrepancies that arise in datasets dominated by the reference model. The main conceptual building blocks were introduced in Ref.… ▽ More We discuss a method that employs a multilayer perceptron to detect deviations from a reference model in large multivariate datasets. Our data analysis strategy does not rely on any prior assumption on the nature of the deviation. It is designed to be sensitive to small discrepancies that arise in datasets dominated by the reference model. The main conceptual building blocks were introduced in Ref. [1]. Here we make decisive progress in the algorithm implementation and we demonstrate its applicability to problems in high energy physics. We show that the method is sensitive to putative new physics signals in di-muon final states at the LHC. We also compare our performances on toy problems with the ones of alternative methods proposed in the literature. △ Less

Submitted 23 September, 2021; v1 submitted 27 December, 2019; originally announced December 2019.

Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC

Authors: G. Abbiendi, J. Alcaraz Maestre, A. Álvarez Fernández, B. Álvarez González, N. Amapane, I. Bachiller, J. M. Barcala, L. Barcellan, C. Battilana, M. Bellato, G. Bencze, M. Benettoni, N. Beni, A. Benvenuti, L. C. Blanco Ramos, A. Boletti, A. Bragagnolo, J. A. Brochero Cifuentes, V. Cafaro, A. Calderon, E. Calvo, A. Cappati, R. Carlin, C. A. Carrillo Montoya, F. R. Cavallo , et al. (118 additional authors not shown)

Abstract: The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irrad… ▽ More The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irradiation facility (GIF++), at large ($\sim$O(100)) acceleration factor, showed ageing effects resulting in a degradation of the DT cell performance. However, full CMS simulations have shown almost no impact in the muon reconstruction efficiency over the full barrel acceptance and for the full integrated luminosity. A second spare DT chamber was moved inside the GIF++ bunker in October 2017. The chamber was being irradiated at lower acceleration factors, and only 2 out of the 12 layers of the chamber were switched at working voltage when the radioactive source was active, being the other layers in standby. In this way the other non-aged layers are used as reference and as a precise and unbiased telescope of muon tracks for the efficiency computation of the aged layers of the chamber, when set at working voltage for measurements. An integrated dose equivalent to two times the expected integrated luminosity of the HL-LHC run has been absorbed by this second spare DT chamber and the final impact on the muon reconstruction efficiency is under study. Direct inspection of some extracted aged anode wires presented a melted resistive deposition of materials. Investigation on the outgassing of cell materials and of the gas components used at the GIF++ are underway. Strategies to mitigate the ageing effects are also being developed. From the long irradiation measurements of the second spare DT chamber, the effects of radiation in the performance of the DTs expected during the HL-LHC run will be presented. △ Less

Submitted 12 December, 2019; originally announced December 2019.

Comments: 10 pages, 7 figures, to be published in JINST, editor I. González Caballero

Report number: CMS CR-2019/159

Journal ref: JINST 14 C12010 (2019)

Study of muon pair production from positron annihilation at threshold energy

Authors: N. Amapane, M. Antonelli, F. Anulli, G. Ballerini, L. Bandiera, N. Bartosik, M. Bauce, A. Bertolin, C. Biino, O. R. Blanco-Garcia, M. Boscolo, C. Brizzolari, A. Cappati, M. Casarsa, G. Cavoto, F. Collamati, G. Cotto, C. Curatolo, R. Di Nardo, F. Gonella, S. Hoh, M. Iafrati, F. Iacoangeli, B. Kiani, D. Lucchesi , et al. (17 additional authors not shown)

Abstract: The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small… ▽ More The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small transverse emittance beams without any additional beam cooling. However most of the measurements available are performed at higher $\sqrt{s}$ values. It is therefore necessary to measure muons production in positron annihilation at threshold energy and compare the experimental results with the predictions in this specific energy regime. Apart from being a topic of physical interest by itself, these near to threshold measurements can have a sizeable impact on the estimation of the ultimate luminosity achievable in a muon collider with the LEMMA injection scheme. △ Less

Submitted 10 January, 2020; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 13 pages, 8 figures

Journal ref: 2020 JINST 15 P01036

Machine Learning Pipelines with Modern Big Data Tools for High Energy Physics

Authors: Matteo Migliorini, Riccardo Castellotti, Luca Canali, Marco Zanetti

Abstract: The effective utilization at scale of complex machine learning (ML) techniques for HEP use cases poses several technological challenges, most importantly on the actual implementation of dedicated end-to-end data pipelines. A solution to these challenges is presented, which allows training neural network classifiers using solutions from the Big Data and data science ecosystems, integrated with tool… ▽ More The effective utilization at scale of complex machine learning (ML) techniques for HEP use cases poses several technological challenges, most importantly on the actual implementation of dedicated end-to-end data pipelines. A solution to these challenges is presented, which allows training neural network classifiers using solutions from the Big Data and data science ecosystems, integrated with tools, software, and platforms common in the HEP environment. In particular, Apache Spark is exploited for data preparation and feature engineering, running the corresponding (Python) code interactively on Jupyter notebooks. Key integrations and libraries that make Spark capable of ingesting data stored using ROOT format and accessed via the XRootD protocol, are described and discussed. Training of the neural network models, defined using the Keras API, is performed in a distributed fashion on Spark clusters by using BigDL with Analytics Zoo and also by using TensorFlow, notably for distributed training on CPU and GPU resourcess. The implementation and the results of the distributed training are described in detail in this work. △ Less

Submitted 16 June, 2020; v1 submitted 23 September, 2019; originally announced September 2019.

Comments: This is a pre-print of an article published in Computing and Software for Big Science. The final authenticated version is available online at https://rdcu.be/b4Wk9

Journal ref: Comput Softw Big Sci 4, 8 (2020)

Positron driven muon source for a muon collider

Authors: D. Alesini, M. Antonelli, M. E. Biagini, M. Boscolo, O. R. Blanco-García, A. Ciarma, R. Cimino, M. Iafrati, A. Giribono, S. Guiducci, L. Pellegrino, M. Rotondo, C. Vaccarezza, A. Variola, A. Allegrucci, F. Anulli, M. Bauce, F. Collamati, G. Cavoto, G. Cesarini, F. Iacoangeli, R. Li Voti, A. Bacci, I. Drebot, P. Raimondi , et al. (33 additional authors not shown)

Abstract: The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an… ▽ More The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D. △ Less

Submitted 19 May, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Comments: 18 pages, 32 figures

Gamma Factory at CERN -- novel research tools made of light

Authors: W. Placzek, A. Abramov, S. E. Alden, R. Alemany Fernandez, P. S. Antsiferov, A. Apyan, H. Bartosik, E. G. Bessonov, N. Biancacci, J. Bieron, A. Bogacz, A. Bosco, R. Bruce, D. Budker, K. Cassou, F. Castelli, I. Chaikovska, C. Curatolo, P. Czodrowski, A. Derevianko, K. Dupraz, Y. Dutheil, K. Dzierzega, V. Fedosseev, N. Fuster Martinez , et al. (37 additional authors not shown)

Abstract: We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in… ▽ More We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in the particularly interesting gamma-ray energy domain of 0.1-400 MeV. In this energy range, the high-intensity photon beams can be used to produce secondary beams of polarised electrons, polarised positrons, polarised muons, neutrinos, neutrons and radioactive ions. New research opportunities in a wide domain of fundamental and applied physics can be opened by the Gamma Factory scientific programme based on the above primary and secondary beams. △ Less

Submitted 14 June, 2019; v1 submitted 21 March, 2019; originally announced March 2019.

Comments: 12 pages; presented by W. Placzek at the XXV Cracow Epiphany Conference on Advances in Heavy Ion Physics, 8-11 January 2019, Cracow, Poland

Search for Higgs-like particles produced in association with bottom quarks in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φ$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified… ▽ More We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φ$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified as initiated by bottom quarks and corresponds to $5.4~\text{fb}^{-1}$ of integrated luminosity. In each event, the invariant mass of the two most energetic jets is studied by looking for deviations from the multijet background, which is modeled using data. No evidence is found for such particle. Exclusion upper limits ranging from 20 to 2 pb are set for the product of production cross sections times branching fraction for hypothetical $φ$ boson with mass between 100 and 300 GeV/$c^2$. These are the most stringent constraints to date. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: submitted to PRD

Report number: FERMILAB-PUB-19-067-PPD

Journal ref: Phys. Rev. D 99, 052001 (2019)

Using Big Data Technologies for HEP Analysis

Authors: Matteo Cremonesi, Claudio Bellini, Bianny Bian, Luca Canali, Vasileios Dimakopoulos, Peter Elmer, Ian Fisk, Maria Girone, Oliver Gutsche, Siew-Yan Hoh, Bo Jayatilaka, Viktor Khristenko, Andrea Luiselli, Andrew Melo, Evangelos Evangelos, Dominick Olivito, Jacopo Pazzini, Jim Pivarski, Alexey Svyatkovskiy, Marco Zanetti

Abstract: The HEP community is approaching an era were the excellent performances of the particle accelerators in delivering collision at high rate will force the experiments to record a large amount of information. The growing size of the datasets could potentially become a limiting factor in the capability to produce scientific results timely and efficiently. Recently, new technologies and new approaches… ▽ More The HEP community is approaching an era were the excellent performances of the particle accelerators in delivering collision at high rate will force the experiments to record a large amount of information. The growing size of the datasets could potentially become a limiting factor in the capability to produce scientific results timely and efficiently. Recently, new technologies and new approaches have been developed in industry to answer to the necessity to retrieve information as quickly as possible to analyze PB and EB datasets. Providing the scientists with these modern computing tools will lead to rethinking the principles of data analysis in HEP, making the overall scientific process faster and smoother. In this paper, we are presenting the latest developments and the most recent results on the usage of Apache Spark for HEP analysis. The study aims at evaluating the efficiency of the application of the new tools both quantitatively, by measuring the performances, and qualitatively, focusing on the user experience. The first goal is achieved by develo** a data reduction facility: working together with CERN Openlab and Intel, CMS replicates a real physics search using Spark-based technologies, with the ambition of reducing 1 PB of public data in 5 hours, collected by the CMS experiment, to 1 TB of data in a format suitable for physics analysis. The second goal is achieved by implementing multiple physics use-cases in Apache Spark using as input preprocessed datasets derived from official CMS data and simulation. By performing different end-analyses up to the publication plots on different hardware, feasibility, usability and portability are compared to the ones of a traditional ROOT-based workflow. △ Less

Submitted 21 January, 2019; originally announced January 2019.

QCD Sum Rules Approach to the $X,~Y$ and $Z$ States

Authors: Raphael M. Albuquerque, Jorgivan M. Dias, K. P. Khemchandani, A. Martinez Torres, Fernando S. Navarra, Marina Nielsen, Carina M. Zanetti

Abstract: In the past decade, due to the experimental observation of many charmonium-like states, there has been a revival of hadron spectroscopy. In particular, the experimental observation of charged charmonium-like, $Z_c$ states, and bottomonium-like, $Z_b$ states, represents a challenge since they can not be accommodated within the naive quark model. These charged states are good candidates of either te… ▽ More In the past decade, due to the experimental observation of many charmonium-like states, there has been a revival of hadron spectroscopy. In particular, the experimental observation of charged charmonium-like, $Z_c$ states, and bottomonium-like, $Z_b$ states, represents a challenge since they can not be accommodated within the naive quark model. These charged states are good candidates of either tetraquark or molecular states and their observation motivated a vigorous theoretical activity. This is a rapidly evolving field with enormous amount of new experimental information. In this work, we review the current experimental progress and investigate various theoretical interpretations of these candidates of the multiquark states. The present review is written from the perspective of the QCD sum rules approach, where we present the main steps of concrete calculations and compare the results with other approaches and with experimental data. △ Less

Submitted 12 June, 2019; v1 submitted 19 December, 2018; originally announced December 2018.

Comments: 90 pages, 27 figures; to be published in Journal of Physics G

Deep Learning for Quality Control of Subcortical Brain 3D Shape Models

Authors: Dmitry Petrov, Boris A. Gutman Egor Kuznetsov, Theo G. M. van Erp, Jessica A. Turner, Lianne Schmaal, Dick Veltman, Lei Wang, Kathryn Alpert, Dmitry Isaev, Artemis Zavaliangos-Petropulu, Christopher R. K. Ching, Vince Calhoun, David Glahn, Theodore D. Satterthwaite, Ole Andreas Andreassen, Stefan Borgwardt, Fleur Howells, Nynke Groenewold, Aristotle Voineskos, Joaquim Radua, Steven G. Potkin, Benedicto Crespo-Facorro, Diana Tordesillas-Gutierrez, Li Shen, Irina Lebedeva , et al. (48 additional authors not shown)

Abstract: We present several deep learning models for assessing the morphometric fidelity of deep grey matter region models extracted from brain MRI. We test three different convolutional neural net architectures (VGGNet, ResNet and Inception) over 2D maps of geometric features. Further, we present a novel geometry feature augmentation technique based on a parametric spherical map**. Finally, we present a… ▽ More We present several deep learning models for assessing the morphometric fidelity of deep grey matter region models extracted from brain MRI. We test three different convolutional neural net architectures (VGGNet, ResNet and Inception) over 2D maps of geometric features. Further, we present a novel geometry feature augmentation technique based on a parametric spherical map**. Finally, we present an approach for model decision visualization, allowing human raters to see the areas of subcortical shapes most likely to be deemed of failing quality by the machine. Our training data is comprised of 5200 subjects from the ENIGMA Schizophrenia MRI cohorts, and our test dataset contains 1500 subjects from the ENIGMA Major Depressive Disorder cohorts. Our final models reduce human rater time by 46-70%. ResNet outperforms VGGNet and Inception for all of our predictive tasks. △ Less

Submitted 4 September, 2018; v1 submitted 30 August, 2018; originally announced August 2018.

Comments: Accepted to Shape in Medical Imaging (ShapeMI) workshop at MICCAI 2018. arXiv admin note: substantial text overlap with arXiv:1707.06353

Measurement of the differential cross sections for $W$-boson production in association with jets in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron… ▽ More This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron and muon. The production cross sections are measured for each leptonic decay mode and combined after testing that the ratio of the $W(\rightarrow μν)+$jets cross section to the $W(\rightarrow eν)+$jets cross section agrees with the hypothesis of $e$-$μ$ lepton universality. The combination of measured cross sections, differential in the inclusive jet multiplicity ($W+\geqslant N$ jets with $N=1,\,2,\,3, \textrm{or }4$) and in the transverse energy of the leading jet, are compared with theoretical predictions. △ Less

Submitted 7 August, 2018; originally announced August 2018.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-18-371-E

Journal ref: Phys. Rev. D 98, 112005 (2018)

Search for standard-model Z and Higgs bosons decaying into a bottom-antibottom quark pair in proton-antiproton collisions at 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an… ▽ More The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an integrated luminosity of $5.4~\rm{fb}^{-1}$, is used to measure the $Z$-boson production cross section times branching ratio into $b\bar{b}$. The number of $Z\rightarrow b\bar{b}$ events is determined by fitting the dijet-mass distribution while constraining the dominant $b$-jet background, originating from QCD multijet events, with data. The result, $σ(p\bar{p} \rightarrow Z) \times \mathcal{B}(Z \rightarrow b\bar{b})= 1.11\pm 0.08(\text{stat}) \pm 0.14(\text{syst})~\text{nb}$, is the most precise measurement of this process, and is consistent with the standard-model prediction. The data set is also used to search for Higgs-boson production. No significant signal is expected in our data and the first upper limit on the cross section for the inclusive $p\bar p \rightarrow H\rightarrow b\bar b$ process at $\sqrt{s}=$1.96 TeV is set, corresponding to 33 times the expected standard-model cross section, or $σ= 40.6$ pb, at the 95\% confidence level. △ Less

Submitted 18 October, 2018; v1 submitted 3 July, 2018; originally announced July 2018.

Report number: FERMILAB-PUB-18-307-E-PPD

Journal ref: Phys. Rev. D 98, 072002 (2018)

A search for the exotic meson $X(5568)$ with the Collider Detector at Fermilab

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for the exotic meson $X(5568)$ decaying into the $B^0_s π^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the… ▽ More A search for the exotic meson $X(5568)$ decaying into the $B^0_s π^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the $X(5568) \rightarrow B^0_s \, π^{\pm}$ process. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Comments: 13 pages, 3 figures

Report number: FERMILAB-FN-1048-E

Journal ref: Phys. Rev. Lett. 120, 202006 (2018)

Machine Learning for Large-Scale Quality Control of 3D Shape Models in Neuroimaging

Authors: Dmitry Petrov, Boris A. Gutman, Shih-Hua, Yu, Theo G. M. van Erp, Jessica A. Turner, Lianne Schmaal, Dick Veltman, Lei Wang, Kathryn Alpert, Dmitry Isaev, Artemis Zavaliangos-Petropulu, Christopher R. K. Ching, Vince Calhoun, David Glahn, Theodore D. Satterthwaite, Ole Andreas Andreasen, Stefan Borgwardt, Fleur Howells, Nynke Groenewold, Aristotle Voineskos, Joaquim Radua, Steven G. Potkin, Benedicto Crespo-Facorro, Diana Tordesillas-Gutierrez , et al. (50 additional authors not shown)

Abstract: As very large studies of complex neuroimaging phenotypes become more common, human quality assessment of MRI-derived data remains one of the last major bottlenecks. Few attempts have so far been made to address this issue with machine learning. In this work, we optimize predictive models of quality for meshes representing deep brain structure shapes. We use standard vertex-wise and global shape fe… ▽ More As very large studies of complex neuroimaging phenotypes become more common, human quality assessment of MRI-derived data remains one of the last major bottlenecks. Few attempts have so far been made to address this issue with machine learning. In this work, we optimize predictive models of quality for meshes representing deep brain structure shapes. We use standard vertex-wise and global shape features computed homologously across 19 cohorts and over 7500 human-rated subjects, training kernelized Support Vector Machine and Gradient Boosted Decision Trees classifiers to detect meshes of failing quality. Our models generalize across datasets and diseases, reducing human workload by 30-70\%, or equivalently hundreds of human rater hours for datasets of comparable size, with recall rates approaching inter-rater reliability. △ Less

Submitted 7 August, 2017; v1 submitted 19 July, 2017; originally announced July 2017.

Comments: Arxiv version of the MICCAI 2017 Machine Learning in Medical Imaging workshop paper

A QCD sum rules calculation of the $η_c D^* D$ and $η_c D_s^* D_s$ form factors and strong coupling constants

Authors: B. Osório Rodrigues, M. E. Bracco, C. M. Zanetti

Abstract: We use the QCD sum rules for the three point correlation functions to compute the strong coupling constants of the meson vertices $η_c D^* D$ and $η_c D_s^* D_s$. We consider perturbative and non-perturbative contributions, working up to dimension five on the OPE. The vertices were studied considering that each one of its three mesons are off-shell alternately. The vertex coupling constant is eval… ▽ More We use the QCD sum rules for the three point correlation functions to compute the strong coupling constants of the meson vertices $η_c D^* D$ and $η_c D_s^* D_s$. We consider perturbative and non-perturbative contributions, working up to dimension five on the OPE. The vertices were studied considering that each one of its three mesons are off-shell alternately. The vertex coupling constant is evaluated through the extrapolation of the three different form factors. The results obtained for the coupling constants are $g_{η_c D^* D} = 5.23^{+1.80}_{-1.38}$ and $g_{η_c D_s^* D_s}=5.55^{+1.29}_{-1.55}$. △ Less

Submitted 7 July, 2017; originally announced July 2017.

Comments: 22 pages, 3 figures

Setting limits on Effective Field Theories: the case of Dark Matter

Authors: F. Pobbe, A. Wulzer, M. Zanetti

Abstract: The usage of Effective Field Theories (EFT) for LHC new physics searches is receiving increasing attention. It is thus important to clarify all the aspects related with the applicability of the EFT formalism in the LHC environment, where the large available energy can produce reactions that overcome the maximal range of validity, i.e. the cutoff, of the theory. We show that this does forbid to set… ▽ More The usage of Effective Field Theories (EFT) for LHC new physics searches is receiving increasing attention. It is thus important to clarify all the aspects related with the applicability of the EFT formalism in the LHC environment, where the large available energy can produce reactions that overcome the maximal range of validity, i.e. the cutoff, of the theory. We show that this does forbid to set rigorous limits on the EFT parameter space through a modified version of the ordinary binned likelihood hypothesis test, which we design and validate. Our limit-setting strategy can be carried on in its full-fledged form by the LHC experimental collaborations, or performed externally to the collaborations, through the Simplified Likelihood approach, by relying on certain approximations. We apply it to the recent CMS mono-jet analysis and derive limits on a Dark Matter (DM) EFT model. DM is selected as a case study because the limited reach on the DM production EFT Wilson coefficient and the structure of the theory suggests that the cutoff might be dangerously low, well within the LHC reach. However our strategy can also be applied to EFT's parametrising the indirect effects of heavy new physics in the Electroweak and Higgs sectors. △ Less

Submitted 9 May, 2017; v1 submitted 3 April, 2017; originally announced April 2017.

Measurement of the inclusive-isolated prompt-photon cross section in $p\bar{p}$ collisions using the full CDF data set

Authors: CDF Collaboration, T. Aaltonen, M. G. Albrow, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (374 additional authors not shown)

Abstract: A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a functio… ▽ More A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a function of photon transverse energy, $E_T^γ$, in the range 30$ < E_T^γ <$500GeV and in the pseudorapidity region $|η^γ|<$1.0. The results are compared with predictions from parton-shower Monte Carlo models at leading order in quantum chromodynamics (QCD) and from next-to-leading order perturbative QCD calculations. The latter show good agreement with the measured cross section. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Comments: submitted to Phys. Rev. D - RC

Report number: FERMILAB-PUB-17-053-PPD

Journal ref: Phys. Rev. D 96, 092003 (2017)

X, Y and Z States

Authors: M. Nielsen, R. M. Albuquerque, J. M. Dias, K. P. Khemchandani, A. Martinez Torres, F. S. Navarra, C. M. Zanetti

Abstract: Many new states in the charmonium mass region were recently discovered by BaBar, Belle, CLEO-c, CDF, D0, BESIII, LHCb and CMS Collaborations. We use the QCD Sum Rule approach to study the possible structure of some of these states. Many new states in the charmonium mass region were recently discovered by BaBar, Belle, CLEO-c, CDF, D0, BESIII, LHCb and CMS Collaborations. We use the QCD Sum Rule approach to study the possible structure of some of these states. △ Less

Submitted 10 November, 2016; originally announced November 2016.

Comments: Contribution for the proceedings of the "XII Quark Confinement and the Hadron Spectrum - CONF12" conference

Measurement of the $D^+$-meson production cross section at low transverse momentum in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: We report on a measurement of the $D^{+}$-meson production cross section as a function of transverse momentum ($p_T$) in proton-antiproton ($p\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb$^{-1}$ of integrated luminosity. We use $D^{+} \to K^-π^+π^+$ decays fully reconstruc… ▽ More We report on a measurement of the $D^{+}$-meson production cross section as a function of transverse momentum ($p_T$) in proton-antiproton ($p\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb$^{-1}$ of integrated luminosity. We use $D^{+} \to K^-π^+π^+$ decays fully reconstructed in the central rapidity region $|y|<1$ with transverse momentum down to 1.5 GeV/$c$, a range previously unexplored in $p\bar{p}$ collisions. Inelastic $p\bar{p}$-scattering events are selected online using minimally-biasing requirements followed by an optimized offline selection. The $K^-π^+π^+$ mass distribution is used to identify the $D^+$ signal, and the $D^+$ transverse impact-parameter distribution is used to separate prompt production, occurring directly in the hard scattering process, from secondary production from $b$-hadron decays. We obtain a prompt $D^+$ signal of 2950 candidates corresponding to a total cross section $σ(D^+, 1.5 < p_T < 14.5~\mbox{GeV/}c, |y|<1) = 71.9 \pm 6.8 (\mbox{stat}) \pm 9.3 (\mbox{syst})~μ$b. While the measured cross sections are consistent with theoretical estimates in each $p_T$ bin, the shape of the observed $p_T$ spectrum is softer than the expectation from quantum chromodynamics. The results are unique in $p\bar{p}$ collisions and can improve the shape and uncertainties of future predictions. △ Less

Submitted 27 October, 2016; originally announced October 2016.

Comments: 8 pages, 3 figures

Journal ref: Phys. Rev. D 95, 092006 (2017)

Measurement of the $WW$ and $WZ$ production cross section using final states with a charged lepton and heavy-flavor jets in the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We present a measurement of the total {\it WW} and {\it WZ} production cross sections in $p\bar{p}$ collision at $\sqrt{s}=1.96$ TeV, in a final state consistent with leptonic $W$ boson decay and jets originating from heavy-flavor quarks from either a $W$ or a $Z$ boson decay. This analysis uses the full data set collected with the CDF II detector during Run II of the Tevatron collider, correspond… ▽ More We present a measurement of the total {\it WW} and {\it WZ} production cross sections in $p\bar{p}$ collision at $\sqrt{s}=1.96$ TeV, in a final state consistent with leptonic $W$ boson decay and jets originating from heavy-flavor quarks from either a $W$ or a $Z$ boson decay. This analysis uses the full data set collected with the CDF II detector during Run II of the Tevatron collider, corresponding to an integrated luminosity of 9.4 fb$^{-1}$. An analysis of the dijet mass spectrum provides $3.7σ$ evidence of the summed production processes of either {\it WW} or {\it WZ} bosons with a measured total cross section of $σ_{WW+WZ} = 13.7\pm 3.9$~pb. Independent measurements of the {\it WW} and {\it WZ} production cross sections are allowed by the different heavy-flavor decay-patterns of the $W$ and $Z$ bosons and by the analysis of secondary-decay vertices reconstructed within heavy-flavor jets. The productions of {\it WW} and of {\it WZ} dibosons are independently seen with significances of $2.9σ$ and $2.1σ$, respectively, with total cross sections of $σ_{WW}= 9.4\pm 4.2$~pb and $σ_{WZ}=3.7^{+2.5}_{-2.2}$~pb. The measurements are consistent with standard-model predictions. △ Less

Submitted 31 July, 2016; v1 submitted 22 June, 2016; originally announced June 2016.

Comments: 19 pages, 11 figures, accepted for publication on Physical Review D

Report number: FERMILAB-PUB-16-229-E

Journal ref: Phys. Rev. D 94, 032008 (2016)

Measurement of $\sin^2θ^{\rm lept}_{\rm eff}$ using $e^+e^-$ pairs from $γ^*/Z$ bosons produced in $p\bar{p}$ collisions at a center-of-momentum energy of 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, Drell-Yan lepton pairs are produced in the process $p \bar{p} \rightarrow e^+e^- + X$ through an intermediate $γ^*/Z$ boson. The forward-backward asymmetry in the polar-angle distribution of the $e^-$ as a function of the $e^+e^-$-pair mass is used to obtain $\sin^2θ^{\rm lept}_{\rm eff}$, the effective leptonic determination of the… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, Drell-Yan lepton pairs are produced in the process $p \bar{p} \rightarrow e^+e^- + X$ through an intermediate $γ^*/Z$ boson. The forward-backward asymmetry in the polar-angle distribution of the $e^-$ as a function of the $e^+e^-$-pair mass is used to obtain $\sin^2θ^{\rm lept}_{\rm eff}$, the effective leptonic determination of the electroweak-mixing parameter $\sin^2θ_W$. The measurement sample, recorded by the Collider Detector at Fermilab (CDF), corresponds to 9.4~fb$^{-1}$ of integrated luminosity from $p\bar{p}$ collisions at a center-of-momentum energy of 1.96 TeV, and is the full CDF Run II data set. The value of $\sin^2θ^{\rm lept}_{\rm eff}$ is found to be $0.23248 \pm 0.00053$. The combination with the previous CDF measurement based on $μ^+μ^-$ pairs yields $\sin^2θ^{\rm lept}_{\rm eff} = 0.23221 \pm 0.00046$. This result, when interpreted within the specified context of the standard model assuming $\sin^2 θ_W = 1 - M_W^2/M_Z^2$ and that the $W$- and $Z$-boson masses are on-shell, yields $\sin^2θ_W = 0.22400 \pm 0.00045$, or equivalently a $W$-boson mass of $80.328 \pm 0.024 \;{\rm GeV}/c^2$. △ Less

Submitted 10 June, 2016; v1 submitted 9 May, 2016; originally announced May 2016.

Report number: FERMILAB-PUB-16-165-E

Journal ref: Phys. Rev. D 93, 112016 (2016)

A QCD sum rule calculation of the $X^\pm(5568) \to B_{s}^0π^\pm$ decay width

Authors: J. M. Dias, K. P. Khemchandani, A. Martínez Torres, M. Nielsen, C. M. Zanetti

Abstract: To understand the nature of the $X(5568)$, recently observed in the mass spectrum of the $B_{s}^0π^\pm$ system by the D0 Collaboration, we have investigated, in a previous work, a scalar tetraquark (diquak-antidiquark) structure for it, within the two-point QCD sum rules method. The result found for its mass agrees well with the experimental value. Encouraged by this finding we now extend our calc… ▽ More To understand the nature of the $X(5568)$, recently observed in the mass spectrum of the $B_{s}^0π^\pm$ system by the D0 Collaboration, we have investigated, in a previous work, a scalar tetraquark (diquak-antidiquark) structure for it, within the two-point QCD sum rules method. The result found for its mass agrees well with the experimental value. Encouraged by this finding we now extend our calculations to obtain the decay width of $X(5568)$ to $B_{s}^0π^\pm$ using the three-point QCD sum rule. We obtain a value of $(20.4\pm8.7)\MeV$, which, on comparing with the experimental value of $21.9\pm6.4 (\mbox{sta})^{+5.0}_{-2.5}(\mbox{syst}) \MeV/c^2$, reinforces the scalar four quark nature of $X(5568)$. △ Less

Submitted 3 May, 2016; v1 submitted 7 March, 2016; originally announced March 2016.

Comments: Minor modifications made. Some new discussions and references added

A QCD sum rule study for a charged bottom-strange scalar meson

Authors: C. M. Zanetti, M. Nielsen, K. P. Khemchandani

Abstract: Using the QCD sum rule approach we investigate the possible four-quark structure for the new observed $B_{s}^0π^\pm$ narrow structure (D0). We use a diquak-antidiquark scalar current and work to the order of $m_s$ in full QCD, without relying on $1/m_Q$ expansion. Our study indicates that although it is possible to obtain a stable mass in agreement with the state found by the D0 collaboration, a m… ▽ More Using the QCD sum rule approach we investigate the possible four-quark structure for the new observed $B_{s}^0π^\pm$ narrow structure (D0). We use a diquak-antidiquark scalar current and work to the order of $m_s$ in full QCD, without relying on $1/m_Q$ expansion. Our study indicates that although it is possible to obtain a stable mass in agreement with the state found by the D0 collaboration, a more constraint analysis (simultaneous requirement of the OPE convergence and the dominance of the pole on the phenomenological side) leads to a higher mass. We also predict the masses of the bottom scalar tetraquark resonances with zero and two strange quarks. △ Less

Submitted 15 April, 2016; v1 submitted 29 February, 2016; originally announced February 2016.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. D 93, 096011 (2016)

Measurement of the forward-backward asymmetry of top-quark and antiquark pairs using the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: We measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy $\sqrt{s} = 1.96~\mathrm{TeV}$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $9.1~\rm{fb}^{-1}$. The asymmetry is characterized by the rapidity difference… ▽ More We measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy $\sqrt{s} = 1.96~\mathrm{TeV}$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $9.1~\rm{fb}^{-1}$. The asymmetry is characterized by the rapidity difference between top quarks and antiquarks ($Δy$), and measured in the final state with two charged leptons (electrons and muons). The inclusive asymmetry, corrected to the entire phase space at parton level, is measured to be $A_{\text{FB}}^{t\bar{t}} = 0.12 \pm 0.13$, consistent with the expectations from the standard-model (SM) and previous CDF results in the final state with a single charged lepton. The combination of the CDF measurements of the inclusive $A_{\text{FB}}^{t\bar{t}}$ in both final states yields $A_{\text{FB}}^{t\bar{t}}=0.160\pm0.045$, which is consistent with the SM predictions. We also measure the differential asymmetry as a function of $Δy$. A linear fit to $A_{\text{FB}}^{t\bar{t}}(|Δy|)$, assuming zero asymmetry at $Δy=0$, yields a slope of $α=0.14\pm0.15$, consistent with the SM prediction and the previous CDF determination in the final state with a single charged lepton. The combined slope of $A_{\text{FB}}^{t\bar{t}}(|Δy|)$ in the two final states is $α=0.227\pm0.057$, which is $2.0σ$ larger than the SM prediction. △ Less

Submitted 29 February, 2016; originally announced February 2016.

Comments: To be submitted to Phys. Rev. D

Report number: FERMILAB-PUB-16-045-E

Journal ref: Phys. Rev. D 93, 112005 (2016)

Measurement of the forward-backward asymmetry in low-mass bottom-quark pairs produced in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: We report a measurement of the forward-backward asymmetry, $A_{FB}$, in $b\bar{b}$ pairs produced in proton-antiproton collisions and identified by muons from semileptonic $b$-hadron decays. The event sample was collected at a center-of-mass energy of $\sqrt{s}=1.96$ TeV with the CDF II detector and corresponds to 6.9 fb$^{-1}$ of integrated luminosity. We obtain an integrated asymmetry of… ▽ More We report a measurement of the forward-backward asymmetry, $A_{FB}$, in $b\bar{b}$ pairs produced in proton-antiproton collisions and identified by muons from semileptonic $b$-hadron decays. The event sample was collected at a center-of-mass energy of $\sqrt{s}=1.96$ TeV with the CDF II detector and corresponds to 6.9 fb$^{-1}$ of integrated luminosity. We obtain an integrated asymmetry of $A_{FB}(b\bar{b})=(1.2 \pm 0.7)$\% at the particle level for $b$-quark pairs with invariant mass, $m_{b\bar{b}}$, down to $40$ GeV/$c^2$ and measure the dependence of $A_{FB}(b\bar{b})$ on $m_{b\bar{b}}$. The results are compatible with expectations from the standard model. △ Less

Submitted 25 January, 2016; originally announced January 2016.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-16-017-E

Measurement of the $B_c^{\pm}$ production cross section in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of… ▽ More We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of $8.7\,{\rm fb}^{-1}$. The ratio of the production cross sections times branching fractions for $B_c^+$ and $B_c^+$ mesons with momentum transverse to the beam greater than $6~\textrm{GeV}/c$ and rapidity magnitude smaller than 0.6 is $0.211\pm 0.012~\mbox{(stat)}^{+0.021}_{-0.020}~\mbox{(syst)}$. Using the known $B^+ \rightarrow J/ψK^+$ branching fraction, the known $B^+$ production cross section, and a selection of the predicted $B_c^+ \rightarrow J/ψμν$ branching fractions, the range for the total $B_c^+$ production cross section is estimated. △ Less

Submitted 26 March, 2016; v1 submitted 15 January, 2016; originally announced January 2016.

Comments: 28 pages, 25 figures, and 20 tables. This version is consistent with paper published in Phys. Rev. D on March 1, 2016

Report number: FERMILAB-PUB-16-008-E-PPD

Journal ref: Phys. Rev. D 93, 052001 (2016)

Search for a Low-Mass Neutral Higgs Boson with Suppressed Couplings to Fermions Using Events with Multiphoton Final States

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for a Higgs boson with suppressed couplings to fermions, $h_f$, assumed to be the neutral, lower-mass partner of the Higgs boson discovered at the Large Hadron Collider, is reported. Such a Higgs boson could exist in extensions of the standard model with two Higgs doublets, and could be produced via $p\bar{p} \to H^\pm h_f \to W^* h_f h_f \to 4γ+ X$, where $H^\pm$ is a charged Higgs boson… ▽ More A search for a Higgs boson with suppressed couplings to fermions, $h_f$, assumed to be the neutral, lower-mass partner of the Higgs boson discovered at the Large Hadron Collider, is reported. Such a Higgs boson could exist in extensions of the standard model with two Higgs doublets, and could be produced via $p\bar{p} \to H^\pm h_f \to W^* h_f h_f \to 4γ+ X$, where $H^\pm$ is a charged Higgs boson. This analysis uses all events with at least three photons in the final state from proton-antiproton collisions at a center-of-mass energy of 1.96~TeV collected by the Collider Detector at Fermilab, corresponding to an integrated luminosity of 9.2~${\rm fb}^{-1}$. No evidence of a signal is observed in the data. Values of Higgs-boson masses between 10 and 100 GeV/$c^2$ are excluded at 95\% Bayesian credibility. △ Less

Submitted 4 January, 2016; originally announced January 2016.

Comments: Submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-15-578-E

Journal ref: Phys. Rev. D 93, 112010 (2016)

Fuel burnup analysis of the TRIGA Mark II Reactor at the University of Pavia

Authors: Davide Chiesa, Massimiliano Clemenza, Stefano Pozzi, Ezio Previtali, Monica Sisti, Daniele Alloni, Giovanni Magrotti, Sergio Manera, Michele Prata, Andrea Salvini, Antonio Cammi, Matteo Zanetti, Alberto Sartori

Abstract: A time evolution model was developed to study fuel burnup for the TRIGA Mark II reactor at the University of Pavia. The results were used to predict the effects of a complete core reconfiguration and the accuracy of this prediction was tested experimentally. We used the Monte Carlo code MCNP5 to reproduce system neutronics in different operating conditions and to analyse neutron fluxes in the reac… ▽ More A time evolution model was developed to study fuel burnup for the TRIGA Mark II reactor at the University of Pavia. The results were used to predict the effects of a complete core reconfiguration and the accuracy of this prediction was tested experimentally. We used the Monte Carlo code MCNP5 to reproduce system neutronics in different operating conditions and to analyse neutron fluxes in the reactor core. The software that took care of time evolution, completely designed in-house, used the neutron fluxes obtained by MCNP5 to evaluate fuel consumption. This software was developed specifically to keep into account some features that differentiate experimental reactors from power ones, such as the daily ON/OFF cycle and the long fuel lifetime. These effects can not be neglected to properly account for neutron poison accumulation. We evaluated the effect of 48 years of reactor operation and predicted a possible new configuration for the reactor core: the objective was to remove some of the fuel elements from the core and to obtain a substantial increase in the Core Excess reactivity value. The evaluation of fuel burnup and the reconfiguration results are presented in this paper. △ Less

Submitted 18 November, 2015; originally announced November 2015.

Comments: to be submitted to Annals of Nuclear Energy

Journal ref: Annals of Nuclear Energy 96 (2016) 270-276

JUNO Conceptual Design Report

Authors: T. Adam, F. An, G. An, Q. An, N. Anfimov, V. Antonelli, G. Baccolo, M. Baldoncini, E. Baussan, M. Bellato, L. Bezrukov, D. Bick, S. Blyth, S. Boarin, A. Brigatti, T. Brugière, R. Brugnera, M. Buizza Avanzini, J. Busto, A. Cabrera, H. Cai, X. Cai, A. Cammi, D. Cao, G. Cao , et al. (372 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants in Guangdong, China. The experimental hall, spanning more than 50 meters, is under a granite mountain of over 700 m overburden. Within six years of running, the dete… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants in Guangdong, China. The experimental hall, spanning more than 50 meters, is under a granite mountain of over 700 m overburden. Within six years of running, the detection of reactor antineutrinos can resolve the neutrino mass hierarchy at a confidence level of 3-4$σ$, and determine neutrino oscillation parameters $\sin^2θ_{12}$, $Δm^2_{21}$, and $|Δm^2_{ee}|$ to an accuracy of better than 1%. The JUNO detector can be also used to study terrestrial and extra-terrestrial neutrinos and new physics beyond the Standard Model. The central detector contains 20,000 tons liquid scintillator with an acrylic sphere of 35 m in diameter. $\sim$17,000 508-mm diameter PMTs with high quantum efficiency provide $\sim$75% optical coverage. The current choice of the liquid scintillator is: linear alkyl benzene (LAB) as the solvent, plus PPO as the scintillation fluor and a wavelength-shifter (Bis-MSB). The number of detected photoelectrons per MeV is larger than 1,100 and the energy resolution is expected to be 3% at 1 MeV. The calibration system is designed to deploy multiple sources to cover the entire energy range of reactor antineutrinos, and to achieve a full-volume position coverage inside the detector. The veto system is used for muon detection, muon induced background study and reduction. It consists of a Water Cherenkov detector and a Top Tracker system. The readout system, the detector control system and the offline system insure efficient and stable data acquisition and processing. △ Less

Submitted 28 September, 2015; v1 submitted 28 August, 2015; originally announced August 2015.

Comments: 328 pages, 211 figures

Measurement of vector boson plus $D^{*}(2010)^+$ meson production in $\bar{p}p$ collisions at $\sqrt{s}=1.96\, {\rm TeV}$

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: A measurement of vector boson ($V$) production in conjunction with a $D^{*}(2010)^+$ meson is presented. Using a data sample corresponding to $9.7\, {\rm fb}^{-1}$ of ^Mproton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96\rm~ TeV$ produced by the Fermilab Tevatron, we reconstruct $V+D^{*+}$ samples with the CDF~II detector. The $D^{*+}$ is fully reconstructed in the… ▽ More A measurement of vector boson ($V$) production in conjunction with a $D^{*}(2010)^+$ meson is presented. Using a data sample corresponding to $9.7\, {\rm fb}^{-1}$ of ^Mproton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96\rm~ TeV$ produced by the Fermilab Tevatron, we reconstruct $V+D^{*+}$ samples with the CDF~II detector. The $D^{*+}$ is fully reconstructed in the $D^{*}(2010)^+ \rightarrow D^{0}(\to K^-π^+)π^+$ decay mode. This technique is sensitive to the associated production of vector boson plus charm or bottom mesons. We measure the ratio of production cross sections $σ(W+D^{*})/σ(W)$ = $[1.75\pm 0.13 {\rm (stat)}\pm 0.09 {\rm (syst)}]\% $ and $σ(Z+D^{*})/σ(Z)$ = $[1.5\pm 0.4 {\rm (stat)} \pm 0.2 {\rm (syst)}]\% $ and perform a differential measurement of $dσ(W+D^{*})/dp_T(D^{*})$. Event properties are utilized to determine the fraction of $V+D^{*}(2010)^+$ events originating from different production processes. The results are in agreement with the predictions obtained with the {\sc pythia} program, limiting possible contribution from non-standard-model physics processes. △ Less

Submitted 22 March, 2016; v1 submitted 27 August, 2015; originally announced August 2015.

Report number: FERMILAB-PUB-15-368

Journal ref: Phys. Rev. D 93, 052012 (2016)