-
Topology optimization of blazed gratings under conical incidence
Authors:
Simon Ans,
Frédéric Zamkotsian,
Guillaume Demésy
Abstract:
A topology optimization method is presented and applied to a blazed diffraction grating in reflection under conical incidence. This type of gratings is meant to disperse the incident light on one particular diffraction order and this property is fundamental in spectroscopy. Conventionally, a blazed metallic grating is made of a sawtooth profile designed to work with the +/-1st diffraction order in…
▽ More
A topology optimization method is presented and applied to a blazed diffraction grating in reflection under conical incidence. This type of gratings is meant to disperse the incident light on one particular diffraction order and this property is fundamental in spectroscopy. Conventionally, a blazed metallic grating is made of a sawtooth profile designed to work with the +/-1st diffraction order in reflection. In this paper, we question this intuitive triangular pattern and look for optimal opto-geometric characteristics using topology optimization based on Finite Element modelling of Maxwell's equations. In practical contexts, the grating geometry is mono-periodic but it is enlightened by a 3D plane wave with a wavevector outside of the plane of invariance. Consequently, this study deals with the resolution of a direct and inverse problem using the Finite Element Method in this intermediate state between 2D and 3D: the so-called conical incidence. A multi-wavelength objective is used in order to obtain a broadband blazed effect. Finally, several numerical experiments are detailed. The results show that it is possible to reach a 98% diffraction efficiency on the -1st diffraction order if the optimization is performed on a single wavelength, and that the reflection integrated over the [400,1500]nm wavelength range can be 29% higher in absolute, 56% in relative, than that of the sawtooth blazed grating when using a multi-wavelength optimization criterion (from 52% to 81%).
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Space Project for Astrophysical and Cosmological Exploration (SPACE), an ESA stand-alone mission and a possible contribution to the Origins Space Telescope
Authors:
Denis Burgarella,
Andrew Bunker,
Rychard Bouwens,
Laurent Pagani,
Jose Afonso,
Hakim Atek,
Marc Audard,
Sylvie Cabrit,
Karina Caputi,
Laure Ciesla,
Christopher Conselice,
Asantha Cooray,
Giovanni Cresci,
Mirko Curti,
Jose Miguel Rodriguez Espinosa,
Marc Ferrari,
Chiaki Kobayashi,
Nadege Lagarde,
Jesus Gallego Maestro,
Roberto Maiolino,
Katarzyna Malek,
Filippo Mannucci,
Julien Montillaud,
Pascal Oesch,
Chris Pearson
, et al. (8 additional authors not shown)
Abstract:
We propose a new mission called Space Project for Astrophysical and Cosmological Exploration (SPACE) as part on the ESA long term planning Voyage 2050 programme. SPACE will study galaxy evolution at the earliest times, with the key goals of charting the formation of the heavy elements, measuring the evolution of the galaxy luminosity function, tracing the build-up of stellar mass in galaxies over…
▽ More
We propose a new mission called Space Project for Astrophysical and Cosmological Exploration (SPACE) as part on the ESA long term planning Voyage 2050 programme. SPACE will study galaxy evolution at the earliest times, with the key goals of charting the formation of the heavy elements, measuring the evolution of the galaxy luminosity function, tracing the build-up of stellar mass in galaxies over cosmic time, and finding the first super-massive black holes (SMBHs) to form. The mission will exploit a unique region of the parameter space, between the narrow ultra-deep surveys with HST and JWST, and shallow wide-field surveys such as Roman Space Telescope and EUCLID, and should yield by far the largest sample of any current or planned mission of very high redshift galaxies at z > 10 which are sufficiently bright for detailed follow-up spectroscopy. Crucially, we propose a wide-field spectroscopic near-IR + mid-IR capability which will greatly enhance our understanding of the first galaxies by detecting and identifying a statistical sample of the first galaxies and the first SMBH, and to chart the metal enrichment history of galaxies in the early Universe - potentially finding signatures of the very first stars to form from metal-free primordial gas. The wide-field and wavelength range of SPACE will also provide us a unique opportunity to study star formation by performing a wide survey of the Milky Way in the near-IR + mid-IR. This science project can be enabled either by a stand-alone ESA-led M mission or by an instrument for an L mission (with ESA and/or NASA, JAXA and other international space agencies) with a wide-field (sub-)millimetre capability at wavelength > 500 microns.
△ Less
Submitted 5 August, 2020; v1 submitted 29 July, 2020;
originally announced July 2020.
-
Probing the use of spectroscopy to determine the meteoritic analogues of meteors
Authors:
A. Drouard,
P. Vernazza,
S. Loehle,
J. Gattacceca,
J. Vaubaillon,
B. Zanda,
M. Birlan,
S. Bouley,
F. Colas,
M. Eberhart,
T. Hermann,
L. Jorda,
C. Marmo,
A. Meindl,
R. Oefele,
F. Zamkotsian,
F. Zander
Abstract:
Determining the source regions of meteorites is one of the major goals of current research in planetary science. Whereas asteroid observations are currently unable to pinpoint the source regions of most meteorite classes, observations of meteors with camera networks and the subsequent recovery of the meteorite may help make progress on this question. The main caveat of such an approach, however, i…
▽ More
Determining the source regions of meteorites is one of the major goals of current research in planetary science. Whereas asteroid observations are currently unable to pinpoint the source regions of most meteorite classes, observations of meteors with camera networks and the subsequent recovery of the meteorite may help make progress on this question. The main caveat of such an approach, however, is that the recovery rate of meteorite falls is low, implying that the meteoritic analogues of at least 80% of the observed falls remain unknown.
Aims: Spectroscopic observations of bolides may have the potential to mitigate this problem by classifying the incoming material.
Methods: To probe the use of spectroscopy to determine the meteoritic analogues of bolides, we collected emission spectra in the visible range (320-880nm) of five meteorite types (H,L,LL,CM,eucrite) acquired in atmospheric entry-like conditions in a plasma wind tunnel at the University of Stuttgart (Germany). A detailed spectral analysis including line identification and mass ratio determinations (Mg/Fe,Na/Fe) was subsequently performed on all spectra.
Results: Spectroscopy, via a simple line identification, allows us to distinguish the main meteorite classes (chondrites, achondrites and irons) but does not have the potential to distinguish for example an H from a CM chondrite.
Conclusions: The source location within the main belt of the different meteorite classes (H, L, LL, CM, etc.) should continue to be investigated via fireball observation networks. Spectroscopy of incoming bolides only marginally helps precisely classify the incoming material (iron meteorites only). To reach a statistically significant sample of recovered meteorites along with accurate orbits (>100) within a reasonable time frame (10-20 years), the optimal solution may be the spatial extension of existing fireball observation networks.
△ Less
Submitted 15 February, 2018; v1 submitted 13 February, 2018;
originally announced February 2018.
-
Deformable mirror interferometric analysis for the direct imagery of exoplanets
Authors:
Johan Mazoyer,
Raphaël Galicher,
Pierre Baudoz,
Patrick Lanzoni,
Frédéric Zamkotsian,
Gérard Rousset
Abstract:
Direct imaging of exoplanet systems requires the use of coronagraphs to reach high contrast levels (10^-8 to 10^-11) at small angular separations (0.1"). However, the performance of these devices is drastically limited by aberrations (in phase or in amplitude, introduced either by atmosphere or by the optics). Coronagraphs must therefore be combined with extreme adaptive optic systems, composed of…
▽ More
Direct imaging of exoplanet systems requires the use of coronagraphs to reach high contrast levels (10^-8 to 10^-11) at small angular separations (0.1"). However, the performance of these devices is drastically limited by aberrations (in phase or in amplitude, introduced either by atmosphere or by the optics). Coronagraphs must therefore be combined with extreme adaptive optic systems, composed of a focal plane wavefront sensor and of a high order deformable mirror. These adaptive optic systems must reach a residual error in the corrected wavefront of less than 0.1 nm (RMS) with a rate of 1 kHz. In addition, the surface defects of the deformable mirror, inherent from the fabrication process, must be limited in order to avoid the introduction of amplitude aberrations. An experimental high contrast bench has been developed at the Paris Observatory (LESIA). This bench includes a Boston Micromachine deformable mirror composed of 1024 actuators. For a precise analysis of its surface and performance, we characterized this mirror on the interferometric bench developed since 2004 at the Marseille Observatory (LAM). In this paper, we present this interferometric bench as well as the results of the analysis. This will include a precise surface characterization and a description of the behavior of the actuators, on a 10 by 10 actuator range (behavior of a single actuator, study of the cross-talk between neighbor actuators, influence of a stuck actuator) and on full mirror scale (general surface shape).
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
MOEMS deformable mirror testing in cryo for future optical instrumentation
Authors:
Frederic Zamkotsian,
Patrick Lanzoni,
Rudy Barette,
Emmanuel Grassi,
Patrick Vors,
Michael Helmbrecht,
Franck Marchis,
Alex Teichman
Abstract:
MOEMS Deformable Mirrors (DM) are key components for next generation instruments with innovative adaptive optics systems, in existing telescopes and in the future ELTs. These DMs must perform at room temperature as well as in cryogenic and vacuum environment. Ideally, the MOEMS-DMs must be designed to operate in such environment. We present some major rules for designing / operating DMs in cryo an…
▽ More
MOEMS Deformable Mirrors (DM) are key components for next generation instruments with innovative adaptive optics systems, in existing telescopes and in the future ELTs. These DMs must perform at room temperature as well as in cryogenic and vacuum environment. Ideally, the MOEMS-DMs must be designed to operate in such environment. We present some major rules for designing / operating DMs in cryo and vacuum. We chose to use interferometry for the full characterization of these devices, including surface quality measurement in static and dynamical modes, at ambient and in vacuum/cryo. Thanks to our previous set-up developments, we placed a compact cryo-vacuum chamber designed for reaching 10-6 mbar and 160K, in front of our custom Michelson interferometer, able to measure performances of the DM at actuator/segment level as well as whole mirror level, with a lateral resolution of 2μm and a sub-nanometric z-resolution. Using this interferometric bench, we tested the Iris AO PTT111 DM: this unique and robust design uses an array of single crystalline silicon hexagonal mirrors with a pitch of 606μm, able to move in tip, tilt and piston with strokes from 5 to 7μm, and tilt angle in the range of +/-5mrad. They exhibit typically an open-loop flat surface figure as good as <20nm rms. A specific mount including electronic and opto-mechanical interfaces has been designed for fitting in the test chamber. Segment deformation, mirror sha**, open-loop operation are tested at room and cryo temperature and results are compared. The device could be operated successfully at 160K. An additional, mainly focus-like, 500 nm deformation is measured at 160K; we were able to recover the best flat in cryo by correcting the focus and local tip-tilts on some segments. Tests on DM with different mirror thicknesses (25μm and 50μm) and different coatings (silver and gold) are currently under way.
△ Less
Submitted 18 April, 2017; v1 submitted 12 April, 2017;
originally announced April 2017.
-
Investigation of faint galactic carbon stars from the first Byurakan spectral survey. III. Infrared characteristics
Authors:
K. S. Gigoyan,
A. Sarkissian,
C. Rossi,
D. Russeil,
G. Kostandyan,
M. Calabresi,
F. Zamkotsian,
M. Meftah
Abstract:
Infra-Red(IR) astronomical databases, namely, IRAS, 2MASS, WISE, and Spitzer, are used to analyze photometric data of 126 carbon stars whose spectra are visible in the First Byurakan Survey low-resolution spectral plates. Among these, six new objects, recently confirmed on the digitized FBS plates, are included. For three of them, moderate-resolution CCD optical spectra are also presented. In this…
▽ More
Infra-Red(IR) astronomical databases, namely, IRAS, 2MASS, WISE, and Spitzer, are used to analyze photometric data of 126 carbon stars whose spectra are visible in the First Byurakan Survey low-resolution spectral plates. Among these, six new objects, recently confirmed on the digitized FBS plates, are included. For three of them, moderate-resolution CCD optical spectra are also presented. In this work several IR color-color diagrams are studied. Early and late-type C stars are separated in the JHK Near-Infra-Red(NIR) color-color plots, as well as in the WISE W3-W4 versus W1-W2 diagram. Late N-type Asymptotic Giant Branch stars are redder in W1-W2, while early-types(CH and R giants) are redder in W3-W4 as expected. Objects with W2-W3 > 1.0 mag. show double-peaked spectral energy distribution, indicating the existence of the circumstellar envelopes around them. 26 N-type stars have IRAS Point Source Catalog(PSC) associations. For FBS 1812+455 IRAS Low-Resolution Spectra in the wavelength range 7.7 - 22.6micron and Spitzer Space Telescope Spectra in the range 5 - 38micro are presented clearly showing absorption features of C2H2(acetylene) molecule at 7.5 and 13.7micron , and the SiC(silicone carbide) emission at 11.3micron. The mass-loss rates for eight Mira-type variables are derived from the K-[12] color and from the pulsation periods. The reddest object among the targets is N-type C star FBS 2213+421, which belong to the group of the cold post-AGB R Coronae Borealis(R CrB) variables.
△ Less
Submitted 16 February, 2017;
originally announced February 2017.
-
Improved achromatization of phase mask coronagraphs using colored apodization
Authors:
M. N'Diaye,
K. Dohlen,
S. Cuevas,
R. Soummer,
C. Sánchez-Pérez,
F. Zamkotsian
Abstract:
For direct imaging of exoplanets, a stellar coronagraph helps to remove the image of an observed bright star by attenuating the diffraction effects caused by the telescope aperture of diameter D. The Dual Zone Phase Mask (DZPM) coronagraph constitutes a promising concept since it theoretically offers a small inner working angle (IWA \sim λ_0/D), good achromaticity and high starlight rejection, typ…
▽ More
For direct imaging of exoplanets, a stellar coronagraph helps to remove the image of an observed bright star by attenuating the diffraction effects caused by the telescope aperture of diameter D. The Dual Zone Phase Mask (DZPM) coronagraph constitutes a promising concept since it theoretically offers a small inner working angle (IWA \sim λ_0/D), good achromaticity and high starlight rejection, typically reaching a 1e6 contrast at 5 λ_0/D from the star over a spectral bandwidth Δλ/λ_0 of 25% (similar to H-band). This last value proves to be encouraging for broadband imaging of young and warm Jupiter-like planets. Contrast levels higher than 1e6 are however required for the observation of older and/or less massive companions over a finite spectral bandwidth. An achromatization improvement of the DZPM coronagraph is therefore mandatory to reach such performance. In its design, the DZPM coronagraph uses a grey (or achromatic) apodization. We propose to replace it by a colored apodization to increase the performance of this coronagraphic system over a large spectral range. This innovative concept, called Colored Apodizer Phase Mask (CAPM) coronagraph, is defined with some design parameters optimized to reach the best contrast in the exoplanet search area. Once this done, we study the performance of the CAPM coronagraph in the presence of different errors to evaluate the sensitivity of our concept. A 2.5 mag contrast gain is estimated from the performance provided by the CAPM coronagraph with respect to that of the DZPM coronagraph. A 2.2e-8 intensity level at 5 λ_0/D separation is then theoretically achieved with the CAPM coronagraph in the presence of a clear circular aperture and a 25% bandwidth. In addition, our studies show that our concept is less sensitive to low than high-order aberrations for a given value of rms wavefront errors.
△ Less
Submitted 14 November, 2011;
originally announced November 2011.
-
Applications of DMDs for astrophysical research
Authors:
M. Robberto,
A. Cimatti,
A. Jacobsen,
F. Zamkotsian,
F. M. Zerbi
Abstract:
A long-standing problem of astrophysical research is how to simultaneously obtain spectra of thousands of sources randomly positioned in the field of view of a telescope. Digital Micromirror Devices, used as optical switches, provide a most powerful solution allowing to design a new generation of instruments with unprecedented capabilities. We illustrate the key factors (opto-mechanical, cryo-th…
▽ More
A long-standing problem of astrophysical research is how to simultaneously obtain spectra of thousands of sources randomly positioned in the field of view of a telescope. Digital Micromirror Devices, used as optical switches, provide a most powerful solution allowing to design a new generation of instruments with unprecedented capabilities. We illustrate the key factors (opto-mechanical, cryo-thermal, cosmic radiation environment,...) that constrain the design of DMD-based multi-object spectrographs, with particular emphasis on the IR spectroscopic channel onboard the EUCLID mission, currently considered by the European Space Agency for a 2017 launch date.
△ Less
Submitted 16 February, 2009;
originally announced February 2009.
-
FALCON: a concept to extend adaptive optics corrections to cosmological fields
Authors:
Francois Hammer,
Mathieu Puech,
Francois Assemat,
Eric Gendron,
Frederic Sayede,
Philippe Laporte,
Michel Marteaud,
Arnaud Liotard,
Frederic Zamkotsian
Abstract:
FALCON is an original concept for a next generation spectrograph at ESO VLT or at future ELTs. It is a spectrograph including multiple small integral field units (IFUs) which can be deployed within a large field of view such as that of VLT/GIRAFFE. In FALCON, each IFU features an adaptive optics correction using off-axis natural reference stars in order to combine, in the 0.8-1.8 μm wavelength r…
▽ More
FALCON is an original concept for a next generation spectrograph at ESO VLT or at future ELTs. It is a spectrograph including multiple small integral field units (IFUs) which can be deployed within a large field of view such as that of VLT/GIRAFFE. In FALCON, each IFU features an adaptive optics correction using off-axis natural reference stars in order to combine, in the 0.8-1.8 μm wavelength range, spatial and spectral resolutions (0.1-0.15 arcsec and R=10000+/-5000). These conditions are ideally suited for distant galaxy studies, which should be done within fields of view larger than the galaxy clustering scales (4-9 Mpc), i.e. foV > 100 arcmin2. Instead of compensating the whole field, the adaptive correction will be performed locally on each IFU. This implies to use small miniaturized devices both for adaptive optics correction and wavefront sensing. Applications to high latitude fields imply to use atmospheric tomography because the stars required for wavefront sensing will be in most of the cases far outside the isoplanatic patch.
△ Less
Submitted 11 February, 2004;
originally announced February 2004.
-
The FALCON concept: multi-object spectroscopy combined with MCAO in near-IR
Authors:
F. Hammer,
F. Sayède,
E. Gendron,
T. Fusco,
D. Burgarella,
V. Cayatte,
JM. Conan,
F. Courbin,
H. Flores,
I. Guinouard,
L. Jocou,
A. Lançon,
G. Monnet,
M. Mouhcine,
F. Rigaud,
D. Rouan,
G. Rousset,
V. Buat,
F. Zamkotsian
Abstract:
A large fraction of the present-day stellar mass was formed between z=0.5 and z~3 and our understanding of the formation mechanisms at work at these epochs requires both high spatial and high spectral resolution: one shall simultaneously} obtain images of objects with typical sizes as small as 1-2kpc(~0''.1), while achieving 20-50 km/s (R >= 5000) spectral resolution. The obvious instrumental so…
▽ More
A large fraction of the present-day stellar mass was formed between z=0.5 and z~3 and our understanding of the formation mechanisms at work at these epochs requires both high spatial and high spectral resolution: one shall simultaneously} obtain images of objects with typical sizes as small as 1-2kpc(~0''.1), while achieving 20-50 km/s (R >= 5000) spectral resolution. The obvious instrumental solution to adopt in order to tackle the science goal is therefore a combination of multi-object 3D spectrograph with multi-conjugate adaptive optics in large fields. A partial, but still competitive correction shall be prefered, over a much wider field of view. This can be done by estimating the turbulent volume from sets of natural guide stars, by optimizing the correction to several and discrete small areas of few arcsec2 selected in a large field (Nasmyth field of 25 arcmin) and by correcting up to the 6th, and eventually, up to the 60th Zernike modes. Simulations on real extragalactic fields, show that for most sources (>80%), the recovered resolution could reach 0".15-0".25 in the J and H bands. Detection of point-like objects is improved by factors from 3 to >10, when compared with an instrument without adaptive correction. The proposed instrument concept, FALCON, is equiped with deployable mini-integral field units (IFUs), achieving spectral resolutions between R=5000 and 20000. Its multiplex capability, combined with high spatial and spectral resolution characteristics, is a natural ground based complement to the next generation of space telescopes.
△ Less
Submitted 18 September, 2001;
originally announced September 2001.
-
Multi-Object Spectroscopy in Space
Authors:
D. Burgarella,
V. Buat,
K. Dohlen,
F. Zamkotsian,
P. Mottier
Abstract:
From the scientific objectives of the Next Generation Space Telescope, this paper tries to constrain the design of the NGST Multi-Object Spectrograph. Several technical alternatives are presented that could address the requirements of the Design Reference Mission.
From the scientific objectives of the Next Generation Space Telescope, this paper tries to constrain the design of the NGST Multi-Object Spectrograph. Several technical alternatives are presented that could address the requirements of the Design Reference Mission.
△ Less
Submitted 16 July, 1998;
originally announced July 1998.
