-
Higher order mode damper for low energy RHIC electron cooler SRF booster cavity
Authors:
A. Fedotov,
H. Hahn,
D. Holmes,
G. McIntyre,
C. Pai,
S. Seberg,
K. Smith,
R. Than,
P. Thieberger,
J. Tuozzolo,
Q. Wu,
T. Xin,
Wencan Xu,
A. Zaltsman
Abstract:
To improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon, the Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL. The Linac of LEReC is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with rms dp/p less than 5e-4. A 704 MHz superconducting radio frequency (SRF) booster cavity in this Linac provides up to 2.2 MeV accelerating voltage. With suc…
▽ More
To improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon, the Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL. The Linac of LEReC is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with rms dp/p less than 5e-4. A 704 MHz superconducting radio frequency (SRF) booster cavity in this Linac provides up to 2.2 MeV accelerating voltage. With such a low energy and very demanding energy spread requirement, control of Higher Order Modes (HOMs) in the cavities becomes critical and needs to be carefully evaluated to ensure minimum impact on the beam. In this paper, we report the multiphysics design of the HOM damper for this cavity to meet the energy spread requirement, as well as experimental results of the cavity with and without the HOM damper.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
Operation of the 56 MHz Superconducting RF Cavity in RHIC with Higher Order Mode Damper
Authors:
Q. Wu,
S. Belomestnykh,
I. Ben-Zvi,
M. Blaskiewicz,
T. Hayes,
K. Mernick,
F. Severino,
K. Smith,
A. Zaltsman
Abstract:
A 56 MHz superconducting RF cavity was designed and installed in the Relativistic Heavy Ion Collider (RHIC). It is the first superconducting quarter wave resonator (QWR) operating in a high-energy storage ring. We discuss herein the cavity operation with Au+Au collisions, and with asymmetrical Au+He3 collisions. The cavity is a storage cavity, meaning that it becomes active only at the energy of e…
▽ More
A 56 MHz superconducting RF cavity was designed and installed in the Relativistic Heavy Ion Collider (RHIC). It is the first superconducting quarter wave resonator (QWR) operating in a high-energy storage ring. We discuss herein the cavity operation with Au+Au collisions, and with asymmetrical Au+He3 collisions. The cavity is a storage cavity, meaning that it becomes active only at the energy of experiment, after the acceleration cycle is completed. With the cavity at 300 kV, an improvement in luminosity was detected from direct measurements, and the bunch length has been reduced. The uniqueness of the QWR demands an innovative design of the higher order mode dampers with high-pass filters, and a distinctive fundamental mode damper that enables the cavity to be bypassed during the acceleration stage.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
Design and test of 704 MHz and 2.1 GHz normal conducting cavities for Low Energy RHIC electron Cooler
Authors:
S. Belomestnykh,
J. M. Brennan,
J. C. Brutus,
G. McIntyre,
K. Mernick,
C. Pai,
K. Smith,
T. Xin,
A. Zaltsman,
V. Veshcherevich
Abstract:
The Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL to improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon. The linac of LEReC consists of a DC photoemission gun, one 704 MHz superconducting radio frequency (SRF) booster cavity, and three normal conducting cavities. It is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with peak-to-peak…
▽ More
The Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL to improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon. The linac of LEReC consists of a DC photoemission gun, one 704 MHz superconducting radio frequency (SRF) booster cavity, and three normal conducting cavities. It is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with peak-to-peak momentum spread dp/p of less than 7e4. Two of the three normal conducting cavities will be used in LEReC for energy spread correction. A single-cell 704 MHz cavity for energy de-chir** and a three-cell 2.1 GHz third harmonic cavity for RF curvature correction. In this paper, we present the designs and RF test results of these two cavities.
△ Less
Submitted 5 April, 2018;
originally announced April 2018.
-
Design of a High-bunch-charge 112-MHz Superconducting RF Photoemission Electron Source
Authors:
T. Xin,
J. C. Brutus,
Sergey A. Belomestnykh,
I. Ben-Zvi,
C. H. Boulware,
T. L. Grimm,
T. Hayes,
Vladimir N. Litvinenko,
K. Mernick,
G. Narayan,
P. Orfin,
I. Pinayev,
T. Rao,
F. Severino,
J. Skaritka,
K. Smith,
R. Than,
J. Tuozzolo,
E. Wang,
B. Xiao,
H. Xie,
A. Zaltsman
Abstract:
High-bunch-charge photoemission electron-sources operating in a continuous wave (CW) mode are required for many advanced applications of particle accelerators, such as electron coolers for hadron beams, electron-ion colliders, and free-electron lasers (FELs). Superconducting RF (SRF) has several advantages over other electron-gun technologies in CW mode as it offers higher acceleration rate and po…
▽ More
High-bunch-charge photoemission electron-sources operating in a continuous wave (CW) mode are required for many advanced applications of particle accelerators, such as electron coolers for hadron beams, electron-ion colliders, and free-electron lasers (FELs). Superconducting RF (SRF) has several advantages over other electron-gun technologies in CW mode as it offers higher acceleration rate and potentially can generate higher bunch charges and average beam currents. A 112 MHz SRF electron photoinjector (gun) was developed at Brookhaven National Laboratory (BNL) to produce high-brightness and high-bunch-charge bunches for the Coherent electron Cooling Proof-of-Principle (CeC PoP) experiment. The gun utilizes a quarter-wave resonator (QWR) geometry for assuring beam dynamics, and uses high quantum efficiency (QE) multi-alkali photocathodes for generating electrons.
△ Less
Submitted 27 August, 2016;
originally announced August 2016.
-
High-gradient High-charge CW Superconducting RF gun with CsK2Sb photocathode
Authors:
Igor Pinayev,
Vladimir N. Litvinenko,
Joseph Tuozzolo,
Jean Clifford Brutus,
Sergey Belomestnykh,
Chase Boulware,
Charles Folz,
David Gassner,
Terry Grimm,
Yue Hao,
James Jamilkowski,
Yichao **g,
Dmitry Kayran,
George Mahler,
Michael Mapes,
Toby Miller,
Geetha Narayan,
Brian Sheehy,
Triveni Rao,
John Skaritka,
Kevin Smith,
Louis Snydstrup,
Yatming Than,
Erdong Wang,
Gang Wang
, et al. (18 additional authors not shown)
Abstract:
High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun w…
▽ More
High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun with a record-high accelerating gradient at the CsK2Sb photocathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (i.e., 3 nC). We briefly describe the system and then detail our experimental results. This achievement opens new era in generating high-power electron beams with a very high brightness.
△ Less
Submitted 17 November, 2015;
originally announced November 2015.