-
Temperature dependence of photo-induced phase segregation in bromide-rich mixed halide perovskites
Authors:
Grigorii Verkhogliadov,
Ross Haroldson,
Dmitry Gets,
Anvar A. Zakhidov,
Sergey V. Makarov
Abstract:
Mixed halide perovskites undergo phase segregation, manifested as spectral red-shifting of photoluminescence spectra under illumination. In the iodine-bromide mixed perovskites, the origin of the low-energy luminescence is related to iodine-enriched domains formation. Such domains create favorable bands for the induced carrier funneling into them. Despite the phase segregation process is crucial f…
▽ More
Mixed halide perovskites undergo phase segregation, manifested as spectral red-shifting of photoluminescence spectra under illumination. In the iodine-bromide mixed perovskites, the origin of the low-energy luminescence is related to iodine-enriched domains formation. Such domains create favorable bands for the induced carrier funneling into them. Despite the phase segregation process is crucial for mixed halide perovskite-based optoelectronics, numerous gaps exist within the understanding of this phenomenon. One such gap pertains to the emergence of temporary and intermediate photoluminescence peaks during the initial stages of phase segregation. However, these peaks appear only within the first few seconds of illumination. Nevertheless, the decreasing temperature may prolong these initial stages. In this work, we carry out a detailed study of the temperature dependence of anion segregation in MAPbBr_2I and MAPbBr2.5I0.5 halide perovskites, to obtain a deeper comprehension of segregation processes, particularly during their initial stages. The temporal evolution of low-temperature photoluminescence reveals the undergoing of the intermediate stage during the segregation process and temperature-related phase transition from orthorhombic to tetragonal phase. To complement the phase segregation study, the temperature dependence of time-resolved photoluminescence spectroscopy is provided, allowing us to estimate the change in the photoluminescence lifetimes for the initial and segregated peaks with temperature.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
An improved model for describing the net carrier recombination rate in semiconductor devices
Authors:
M. L. Inche Ibrahim,
Anvar A. Zakhidov
Abstract:
Carrier recombination is a process that significantly influences the performance of semiconductor devices such as solar cells, photodiodes, and light-emitting diodes (LEDs). Therefore, a model that can accurately describe and quantify the net carrier recombination rate in semiconductor devices is important in order to further improve the performance of relevant semiconductor devices. The conventio…
▽ More
Carrier recombination is a process that significantly influences the performance of semiconductor devices such as solar cells, photodiodes, and light-emitting diodes (LEDs). Therefore, a model that can accurately describe and quantify the net carrier recombination rate in semiconductor devices is important in order to further improve the performance of relevant semiconductor devices. The conventional model for describing the net carrier recombination rate is derived based on the condition that there is no electric current in the considered semiconductor, which is true only when the semiconductor is not part of a semiconductor device, and hence is not connected to an external circuit. The conventional model is adopted and used for describing the net carrier recombination rate in semiconductors that are part of devices (i.e. in semiconductor devices). In this paper, we derive and propose a new model for describing the net carrier recombination rate in semiconductor devices. The newly proposed model is an improvement to the currently used model by considering the fact that electric current can flow in the semiconducting materials of semiconductor devices. We validate the proposed recombination model and show that the use of the proposed model can be crucial for modeling and analyzing the performance of optoelectronic devices such as solar cells and LEDs.
△ Less
Submitted 30 August, 2021; v1 submitted 23 August, 2021;
originally announced August 2021.
-
Bright and Color-Tunable Single Layer Perovskite Host-Ionic Guest Light Emitting Electrochemical Cells
Authors:
Aditya Mishra,
Stephen DiLuzio,
Masoud Alahbakhshi,
Austen Adams,
Melanie H. Bowler,
Qing Gu,
Anvar A. Zakhidov,
Stefan Bernhard,
Jason D. Slinker
Abstract:
Perovskite light emitting devices have drawn considerable attention for their favorable optoelectronic properties. High carrier mobilities make perovskites excellent candidates as host materials in electroluminescent devices. To achieve high performance in a simple single layer device, we employed a CsPbBr3 perovskite host and a novel ionic iridium complex guest along with a polyelectrolyte to dem…
▽ More
Perovskite light emitting devices have drawn considerable attention for their favorable optoelectronic properties. High carrier mobilities make perovskites excellent candidates as host materials in electroluminescent devices. To achieve high performance in a simple single layer device, we employed a CsPbBr3 perovskite host and a novel ionic iridium complex guest along with a polyelectrolyte to demonstrate efficient light emitting electrochemical cells (PeLECs). For an optimal guest/host blend, 10600 cd/m2 luminance at 11.6 cd/A and 9.04 Lm/W are achieved at 4.1 V. These devices showed voltage-dependent electroluminescence color proceeding from orange-red to green, facilitated by the reconfigurable ionic materials blend. Optimized devices exhibited stable operation under constant current driving, maintaining >630 cd/m2 emission for 40 h. Our rationally-designed ionic guest at an optimal concentration of the host produced efficient (>90%) Forster energy transfer and improved thin film morphological for high performance PeLEC operation enabled by ionic migration to interfaces
△ Less
Submitted 23 July, 2020;
originally announced July 2020.
-
Enhanced Operational Stability of Perovskite Light-Emitting Electrochemical Cells Leveraging Ionic Additives
Authors:
Aditya Mishra,
Masoud Alahbakhshi,
Ross Haroldson,
Lyndon D. Bastatas,
Qing Gu,
Anvar A. Zakhidov,
Jason D. Slinker
Abstract:
Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, the operational lifetime has remained a limiting factor for the continued progress of perovskite light emitting devices such as light emitting diodes (LEDs) and perovskite light emitting electrochemical cells (PeLECs). In this work, PeLECs utilizing an optimized fraction of LiPF6 salt additive e…
▽ More
Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, the operational lifetime has remained a limiting factor for the continued progress of perovskite light emitting devices such as light emitting diodes (LEDs) and perovskite light emitting electrochemical cells (PeLECs). In this work, PeLECs utilizing an optimized fraction of LiPF6 salt additive exhibit enhanced stability. At 0.5 wt% LiPF6, devices exhibit 100 h operation at high brightness in excess of 800 cd/m2 under constant current driving, achieving a maximum luminance of 3260 cd/m2 and power efficiency of 9.1 Lm/W. This performance extrapolates to a 6700 h luminance half-life from 100 cd/m2, a 5.6-fold improvement over devices with no lithium salt additive. Analysis under constant voltage driving reveals three current regimes, with lithium addition strongly enhancing current in the second and third regimes. The third regime correlates degradation of luminance with decreased current. These losses are mitigated by LiPF6 addition, an effect postulated to arise from preservation of perovskite structure. To further understand lithium salt addition, electrochemical impedance spectroscopy with equivalent circuit modeling is performed. Electrical double layer widths from ionic redistribution are minimized at 0.5wt% LiPF6 and inversely correlate with efficient performance.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Ionically gated perovskite solar cell with tunable carbon nanotube interface at thick fullerene electron transporting layer: comparison to gated OPV
Authors:
D. S. Saranin,
D. S. Muratov,
R. Haroldson,
A. G. Nasibulin,
A. R. Ishteev,
D. V. Kuznetsov,
M. N. Orlova,
S. I. Didenko,
A. A. Zakhidov
Abstract:
We demonstrate an ionically gated planar PS-PV solar cell with ultra-thick fullerene ETL with a porous CNT electron collector on top of it. Perovskite photovoltaic devices usually have undoped electron transport layers, usually thin like C60 due to its high resistance. Metallic low work function cathodes are extremely unstable in PS-PV due to reaction with halogens I-/Br-, and it would be desirabl…
▽ More
We demonstrate an ionically gated planar PS-PV solar cell with ultra-thick fullerene ETL with a porous CNT electron collector on top of it. Perovskite photovoltaic devices usually have undoped electron transport layers, usually thin like C60 due to its high resistance. Metallic low work function cathodes are extremely unstable in PS-PV due to reaction with halogens I-/Br-, and it would be desirable to have stable carbon cathodes on top of thick low resistance ETL for enhancing the stability of PS-PVs. We show that gating such top CNT cathode in ionic liquid, as part of a supercapacitor charged by Vg tunes the Fermi level of CNT by EDL charging, and causes lowering of a barrier at of C60/C70 ETL. Moreover, at higher gating voltage ions further propagates into fullerene by electrochemical n-do**, which increases dramatically PV performance by raising mostly two parameters: Isc and FF, resulting in PCE efficiency raised from 3 % to 11 %. N-do** of ETL strongly enhances charge collection by ETL and CNT raising Isc and lowering series resistance and thus increasing strongly PCE. Surprisingly Voc is not sensitive in PS-PV to external Vg gating, on the contrary, to strongly enhanced Voc in ionically gated organic PV, where it is the main gating effect. This insensitivity of Voc to lowering of the work function of Vg gated CNT electrode is a clear indication that Voc in PS-PV is determined by inner p-i-n junction formation in PS itself, via accumulation of its intrinsic mobile ionic species halogens and cations and their vacancies.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Bright and Efficient Perovskite Light Emitting Electrochemical Cells Leveraging Ionic Additives
Authors:
Masoud Alahbakhshi,
Aditya Mishra,
Ross Haroldson,
Arthur Ishteev,
Jiyoung Moon,
Qing Gu,
Jason D. Slinker,
Anvar A. Zakhidov
Abstract:
Perovskite light-emitting diodes (PeLEDs) have drawn considerable attention for their favorable optoelectronic properties. Perovskite light-emitting electrochemical cells (PeLECs) _ devices that utilize mobile ions _ have recently been reported but have yet to reach the performance of the best PeLEDs. We leveraged a poly(ethylene oxide) electrolyte and lithium dopant in CsPbBr3 thin films to produ…
▽ More
Perovskite light-emitting diodes (PeLEDs) have drawn considerable attention for their favorable optoelectronic properties. Perovskite light-emitting electrochemical cells (PeLECs) _ devices that utilize mobile ions _ have recently been reported but have yet to reach the performance of the best PeLEDs. We leveraged a poly(ethylene oxide) electrolyte and lithium dopant in CsPbBr3 thin films to produce PeLECs of improved brightness and efficiency. In particular, we found that a single layer PeLEC from CsPbBr3:PEO:LiPF6 with 0.5% wt. LiPF6 produced highly efficient (22 cd/A) and bright (~15000 cd/m2) electroluminescence. To understand this improved performance among PeLECs, we characterized these perovskite thin films with photoluminescence (PL) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). These studies revealed that this optimal LiPF6 concentration improves electrical double layer formation, reduces the occurrence of voids, charge traps, and pinholes, and increases grain size and packing density.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
Single-particle Mie-resonant all-dielectric nanolasers
Authors:
Ekaterina Yu. Tiguntseva,
Kirill L. Koshelev,
Aleksandra D. Furasova,
Vladimir Yu. Mikhailovskii,
Elena V. Ushakova,
Denis G. Baranov,
Timur O. Shegai,
Anvar A. Zakhidov,
Yuri S. Kivshar,
Sergey V. Makarov
Abstract:
All-dielectric subwavelength structures utilizing Mie resonances provide a novel paradigm in nanophotonics for controlling and manipulating light. So far, only spontaneous emission enhancement was demonstrated with single dielectric nanoantennas, whereas stimulated emission was achieved only in large lattices supporting collective modes. Here, we demonstrate the first single-particle all-dielectri…
▽ More
All-dielectric subwavelength structures utilizing Mie resonances provide a novel paradigm in nanophotonics for controlling and manipulating light. So far, only spontaneous emission enhancement was demonstrated with single dielectric nanoantennas, whereas stimulated emission was achieved only in large lattices supporting collective modes. Here, we demonstrate the first single-particle all-dielectric monolithic nanolaser driven by Mie resonances in visible and near-IR frequency range. We employ halide perovskite CsPbBr$_3$ as both gain and resonator material that provides high optical gain (up to $\sim 10^4$ cm$^{-1}$) and allows simple chemical synthesis of nanocubes with nearly epitaxial quality. Our smallest non-plasmonic Mie-resonant single-mode nanolaser with the size of 420 nm operates at room temperatures and wavelength 535 nm with linewidth $\sim 3.5$ meV. These novel lasing nanoantennas can pave the way to multifunctional photonic designs for active control of light at the nanoscale.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes
Authors:
Patricia M. Martinez,
Arthur Ishteev,
Josef Velten,
Azin Fahimi,
Izabela Jurewicz,
Alan B. Dalton,
Ray H. Baughman,
Anvar A. Zakhidov
Abstract:
Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs wit…
▽ More
Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs within the MWNT aerogels increase, however, the final achievable transmittance depends on the initial transparency of the MWNT aerogels. At the same time, a strong decrease in sheet resistance is obtained when AgNWs form a percolated network along the MWNT aerogel. Additionally, anisotropic reduction in sheet resistance and polarized transmittance of AgNWs/MWNTs aerogel is achieved with this method. The final AgNWs/MWNTs hybrid TCEs transmittance and sheet resistance can be fine-tuned by spray-coating mechanisms or by the choice of initial MWNT aerogel density. Thus, a wide range of AgNWs/MWNTs hybrid TCEs with optimized optoelectronic properties can be achieved depending of the requirements needed. Finally, the free-standing AgNWs/MWNTs hybrid TCEs can be laminated onto a wide range of substrates without the need of a bonding aid.
△ Less
Submitted 18 January, 2019;
originally announced January 2019.
-
Resonant Silicon Nanoparticles for Enhanced Light Harvesting in Halide Perovskite Solar Cells
Authors:
A. D. Furasova,
E. Calabró,
E. Lamanna,
E. Y. Tiguntseva,
E. Ushakova,
E. V. Ubyivovk,
V. Y. Mikhailovskii,
A. A. Zakhidov,
S. V. Makarov,
A. Di Carlo
Abstract:
Implementation of resonant colloidal nanoparticles for improving performance of organometal halide perovskites solar cells is highly prospective approach, because it is compatible with the solution processing techniques used for any organic materials. Previously, resonant metallic nanoparticles have been incorporated into perovskite solar cells for better light absorption and charge separation. Ho…
▽ More
Implementation of resonant colloidal nanoparticles for improving performance of organometal halide perovskites solar cells is highly prospective approach, because it is compatible with the solution processing techniques used for any organic materials. Previously, resonant metallic nanoparticles have been incorporated into perovskite solar cells for better light absorption and charge separation. However, high inherent optical losses and high reactivity of noble metals with halides in perovskites are main limiting factors for this approach. In turn, low-loss and chemically inert resonant silicon nanoparticles allow for light trap** and enhancement at nanoscale, being suitable for thin film photovoltaics. Here photocurrent and fill-factor enhancements in meso-superstructured organometal halide perovskite solar cells, incorporating resonant silicon nanoparticles between mesoporous TiO2 transport and active layers, are demonstrated. This results in a boost of the device efficiency up to 18.8\% and fill factor up to 79\%, being a record among the previously reported values on nanoparticles incorporation into CH3NH3PbI3 (MAPbI3) perovskites based solar cells. Theoretical modeling and optical characterization reveal the significant role of Si nanoparticles for increased light absorption in the active layer rather than for better charge separation. The proposed strategy is universal and can be applied in perovskite solar cells with various compositions, as well as in other optoelectronic devices.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Ionically Gated Small Molecule OPV: Interfacial do** of Charge collector and Transport layer
Authors:
Danila S. Saranin,
Abolfazl Mahmoodpoor,
Pavel M. Voroshilov,
Constantin R. Simovski,
Anvar A. Zakhidov
Abstract:
We demonstrate an improvement in the performance of organic photovoltaic (OPV) systems based on small molecules by ionic gating via controlled reversible n-do** of multi-wall carbon nanotube (MWCNT) coated on fullerenes ETL: C60 and C70. Such electric double layer charging (EDLC) do**, achieved by ionic liquid (IL) charging, allows tuning the electronic concentration in MWCNT and in the fuller…
▽ More
We demonstrate an improvement in the performance of organic photovoltaic (OPV) systems based on small molecules by ionic gating via controlled reversible n-do** of multi-wall carbon nanotube (MWCNT) coated on fullerenes ETL: C60 and C70. Such electric double layer charging (EDLC) do**, achieved by ionic liquid (IL) charging, allows tuning the electronic concentration in MWCNT and in the fullerene planar acceptor layers, increasing it by orders of magnitude. This leads to decreasing the series and increasing the shunt resistances of OPV and allows to use of thick (up to 200 nm) ETLs, increasing the durability and stability of OPV. Two stages of OPV enhancement are described, upon the increase of gating bias Vg: at small (or even zero) Vg the extended interface of IL and porous transparent MWCNT is charged by gating, and the fullerene charge collector is significantly improved, becoming an ohmic contact. This changes the S-shaped I-V curve via improving the electron collection by n-doped MWCNT cathode with ohmic interfacial contact. The I-V curves further improve at higher gating bias Vg due to the raising of the Fermi level and lowering of MWCNT work function. At the next qualitative stage, the acceptor fullerene layer becomes n-doped by electron injection from MWCNT while ions of IL penetrate into fullerene. At this step the internal built-in field is created within OPV, which helps exciton dissociation and charge separation/transport, increasing further the Jsc and the FF (Fill factor). Overall power conversion efficiency (PCE) increases nearly 50 times in CuPc/fullerene OPV with MWCNT cathode. The concept of ionically gated MWCNT-ETL interface is numerically simulated by the drift-diffusion model which allows to fit the observed I-V curves.
△ Less
Submitted 16 September, 2020; v1 submitted 28 May, 2018;
originally announced May 2018.
-
Quantum model of phonon transport and heat conductivity in carbon nanoclusters and nanotubes
Authors:
E. Ya. Glushko,
V. N. Evteev,
M. V. Moiseenko,
N. A. Slusarenko,
A. A. Zakhidov
Abstract:
A complex approach phonon quantum discrete model (PQDM) was developed to describe dynamics, kinetics and statistics of phonons in carbon nanostructures with zero-chirality of both zig-zag and armchair geometry. The model allows include into the pure phonon problem existing interaction with others subsystems: electrons, photons, impurities and defects. We predict that planar C- structures are geo…
▽ More
A complex approach phonon quantum discrete model (PQDM) was developed to describe dynamics, kinetics and statistics of phonons in carbon nanostructures with zero-chirality of both zig-zag and armchair geometry. The model allows include into the pure phonon problem existing interaction with others subsystems: electrons, photons, impurities and defects. We predict that planar C- structures are geometrically stable and may bridge interelectrode space in strong external electric field. The exact solution of generalized thermal conductivity (TC) equation was obtained for nanotubes. Temperature distribution along the tube was derived analytically. The diagonalization procedure for the case ofstrong ph-ph interaction was proposed. It was shown the quadratic increasing of heat conductivity with the growth of the phonon mean free path (PMFP). Heat capacitance and the entropy of carbon linear tubes were calculated as the function of temperature. Our theoretical approach explains the nature of good TC in carbon and carbon-like materials by existing of the soft vibration branch (low frequency radial breathing mode phonons with high density of states at thermal energies) accompanied by structure hardness (high frequency $φ$- and z-branches) providing big PMFP. TC coefficient for high conducting channel in surrounding medium was calculated. The mechanism of heat conductivity temperature dam** was analyzed. Two competitive tendencies produce TC maximum at intermediate temperatures (100-300)K. It was shown the strongly non-linear increasing of effective heat conductivity with the growth nanotubes concentration. It was shown that insertion of armchair nanotube inside a medium or its coating by polyacetilene molecule considerably changes the structure of radial breathing phonons.
△ Less
Submitted 19 June, 2003;
originally announced June 2003.
-
Evidence for Braggoriton Excitations in Opal Photonic Crystals Infiltrated with Highly Polarizable Dyes
Authors:
N. Eradat,
A. Y. Sivachenko,
M. E. Raikh,
Z. V. Vardeny,
A. A. Zakhidov,
R. H. Baughman
Abstract:
We studied angle-dependent reflectivity spectra of opal photonic crystals infiltrated with cyanine dyes, which are highly polarizable media with very large Rabi frequency. We show that when resonance conditions between the exciton-polariton of the infiltrated dye and Bragg frequencies exist, then the Bragg stop band decomposes into two reflectivity bands with a semi-transparent spectral range in…
▽ More
We studied angle-dependent reflectivity spectra of opal photonic crystals infiltrated with cyanine dyes, which are highly polarizable media with very large Rabi frequency. We show that when resonance conditions between the exciton-polariton of the infiltrated dye and Bragg frequencies exist, then the Bragg stop band decomposes into two reflectivity bands with a semi-transparent spectral range in between that is due to light propagation inside the gap caused by the existence of braggoriton excitations. These novel excitations result from the interplay interaction between the Bragg gap with spatial modulation origin and the polariton gap due to the excitons, and may lead to optical communication traffic inside the gap of photonic crystals via channel waveguiding.
△ Less
Submitted 9 May, 2001;
originally announced May 2001.
-
Anomalous Coherent Backscattering of Light from Opal Photonic Crystals
Authors:
J. Huang,
N. Eradat,
M. E. Raikh,
Z. V. Vardeny,
A. A. Zakhidov,
R. H. Baughman
Abstract:
We studied coherent backscattering (CBS) of light from opal photonic crystals in air at different incident inclination angles, wavelengths and along various [hkl] directions inside the opals. Similar to previously obtained CBS cones from various random media, we found that when Bragg condition with the incident light beam is not met then the CBS cones from opals show a triangular line shape in e…
▽ More
We studied coherent backscattering (CBS) of light from opal photonic crystals in air at different incident inclination angles, wavelengths and along various [hkl] directions inside the opals. Similar to previously obtained CBS cones from various random media, we found that when Bragg condition with the incident light beam is not met then the CBS cones from opals show a triangular line shape in excellent agreement with light diffusion theory. At Bragg condition, however, we observed a dramatic broadening of the opal CBS cones that depends on the incident angle and [hkl] direction. This broadening is explained as due to the light intensity decay in course of propagation along the Bragg direction {\em before the first} and {\em after the last} scattering events. We modified the CBS theory to incorporate the attenuation that results from the photonic band structure of the medium. Using the modified theory we extract from our CBS data the light mean free path and Bragg attenuation length at different [hkl]. Our study shows that CBS measurements are a unique experimental technique to explore photonic crystals with disorder, when other spectroscopical methods become ambiguous due to disorder-induced broadening.
△ Less
Submitted 9 June, 2000;
originally announced June 2000.