-
Tuning load redistribution and damage near heterogeneous interfaces
Authors:
Christian Greff,
Paolo Moretti,
Michael Zaiser
Abstract:
We investigate interface failure of model materials representing architected thin films in contact with heterogeneous substrates. We find that, while systems with statistically isotropic distributions of impurities derive their fracture strength from the ability to develop rough detachment fronts, materials with hierarchical microstructures confine failure near a prescribed surface, where crack gr…
▽ More
We investigate interface failure of model materials representing architected thin films in contact with heterogeneous substrates. We find that, while systems with statistically isotropic distributions of impurities derive their fracture strength from the ability to develop rough detachment fronts, materials with hierarchical microstructures confine failure near a prescribed surface, where crack growth is arrested and crack surface correlations are suppressed. We develop a theory of network Green's functions for the systems at hand, and we find that the ability of hierarchical microstructures to control failure mode and locations comes at no performance cost in terms of peak stress and specific work of failure and derives from the quenched local anistotropy of the elastic interaction kernel.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Creep failure of hierarchical materials
Authors:
Mahshid Pournajar,
Paolo Moretti,
Seyyed Ahmad Hosseini,
Michael Zaiser
Abstract:
Creep failure of hierarchical materials is investigated by simulation of beam network models. Such models are idealizations of hierarchical fibrous materials where bundles of load-carrying fibers are held together by multi-level (hierarchical) cross-links. Failure of individual beams is assumed to be governed by stress-assisted thermal activation over local barriers, and beam stresses are computed…
▽ More
Creep failure of hierarchical materials is investigated by simulation of beam network models. Such models are idealizations of hierarchical fibrous materials where bundles of load-carrying fibers are held together by multi-level (hierarchical) cross-links. Failure of individual beams is assumed to be governed by stress-assisted thermal activation over local barriers, and beam stresses are computed by solving the global balance equations of linear and angular momentum across the network. Disorder is mimicked by a statistical distribution of barrier heights. Both initially intact samples and samples containing side notches of various length are considered. Samples with hierarchical cross-link patterns are simulated alongside reference samples where cross-links are placed randomly without hierarchical organization. The results demonstrate that hierarchical patterning may strongly increase creep strain and creep lifetime while reducing the lifetime variation. This is due to the fact that hierarchical patterning induces a failure mode that differs significantly from the standard scenario of failure by nucleation and growth of a critical crack. Characterization of this failure mode demonstrates good agreement between the present simulations and experimental findings on hierarchically patterned paper sheets.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Multiscale modeling of dislocations: Combining peridynamics with gradient elasticity
Authors:
Jonas Ritter,
Michael Zaiser
Abstract:
Modeling dislocations is an inherently multiscale problem as one needs to simultaneously describe the high stress fields near the dislocation cores, which depend on atomistic length scales, and a surface boundary value problem which depends on boundary conditions on the sample scale. We present a novel approach which is based on a peridynamic dislocation model to deal with the surface boundary val…
▽ More
Modeling dislocations is an inherently multiscale problem as one needs to simultaneously describe the high stress fields near the dislocation cores, which depend on atomistic length scales, and a surface boundary value problem which depends on boundary conditions on the sample scale. We present a novel approach which is based on a peridynamic dislocation model to deal with the surface boundary value problem. In this model, the singularity of the stress field at the dislocation core is regularized owing to the non-local nature of peridynamics. The effective core radius is defined by the peridynamic horizon which, for reasons of computational cost, must be chosen much larger than the lattice constant. This implies that dislocation stresses in the near-core region are seriously underestimated. By exploiting relationships between peridynamics and Mindlin-type gradient elasticity, we then show that gradient elasticity can be used to construct short-range corrections to the peridynamic stress field that yield a correct description of dislocation stresses from the atomic to the sample scale.
△ Less
Submitted 9 June, 2023;
originally announced June 2023.
-
Failure precursors and failure mechanisms in hierarchically patterned paper sheets in tensile and creep loading
Authors:
Mahshid Pournajar,
Tero Mäkinen,
Seyyed Ahmad Hosseini,
Paolo Moretti,
Mikko Alava,
Michael Zaiser
Abstract:
Quasi-brittle materials endowed with (statistically) self-similar hierarcical microstructures show distinct failure patterns that deviate from the standard scenario of damage accumulation followed by crack nucleation-and-growth. Here we study the failure of paper sheets with hierarchical slice patterns as well as non-hierarchical and unpatterned reference samples, considering both uncracked sample…
▽ More
Quasi-brittle materials endowed with (statistically) self-similar hierarcical microstructures show distinct failure patterns that deviate from the standard scenario of damage accumulation followed by crack nucleation-and-growth. Here we study the failure of paper sheets with hierarchical slice patterns as well as non-hierarchical and unpatterned reference samples, considering both uncracked samples and samples containing a macroscopic crack. Failure is studied under displacement-controlled tensile loading as well as under creep conditions. Acoustic emission records and surface strain patterns are recorded alongside stress-strain and creep curves. The measurements demonstrate that hierarchical patterning efficiently mitigates against strain localization and crack propagation. In tensile loading, this results in a significantly increased residual strength of cracked samples. Under creep conditions, for a given range of lifetimes hierarchically patterned samples are found to sustain larger creep strains at higher stress levels; their creep curves show unusual behavior characterized by multiple creep rate minima due to the repeated arrest of emergent localization bands.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Effects of disorder on deformation and failure of brittle porous materials
Authors:
Jonas Ritter,
Shucheta Shegufta,
Michael Zaiser
Abstract:
The mechanical behavior of porous materials depends strongly on porosity and pore geometry, but also on morphological parameters characterizing the spatial arrangement of pores. Here we use bond-based peridynamics to study effects of disorder on the deformation and failure behavior of brittle porous solids both in the quasi-static limit and in case of dynamic loading scenarios. We show that struct…
▽ More
The mechanical behavior of porous materials depends strongly on porosity and pore geometry, but also on morphological parameters characterizing the spatial arrangement of pores. Here we use bond-based peridynamics to study effects of disorder on the deformation and failure behavior of brittle porous solids both in the quasi-static limit and in case of dynamic loading scenarios. We show that structural disorder, which has a strong influence on stiffness, strength and toughness in the quasi-static limit, becomes less relevant under dynamic loading conditions.
△ Less
Submitted 27 March, 2023; v1 submitted 29 January, 2023;
originally announced January 2023.
-
An energetically consistent surface correction method for bond-based peridynamics
Authors:
Jonas Ritter,
Shucheta Shegufta,
Paul Steinmann,
Michael Zaiser
Abstract:
A novel surface correction method is proposed for bond based peridynamics which ensures energy consistency with a classical reference body for general affine deformations. This method is validated for simple geometries and then applied to a typical surface-dominated problem, namely the indentation of a surface in the shallow to moderate-depth regime.
A novel surface correction method is proposed for bond based peridynamics which ensures energy consistency with a classical reference body for general affine deformations. This method is validated for simple geometries and then applied to a typical surface-dominated problem, namely the indentation of a surface in the shallow to moderate-depth regime.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Predicting Creep Failure by Machine Learning -- Which Features Matter?
Authors:
Stefan Hiemer,
Paolo Moretti,
Stefano Zapperi,
Michael Zaiser
Abstract:
Spatial and temporal features are studied with respect to their predictive value for failure time prediction in subcritical failure with machine learning (ML). Data are generated from simulations of a novel, brittle random fuse model (RFM), as well as elasto-plastic finite element simulations (FEM) of a stochastic plasticity model with damage, both models considering stochastic thermally activated…
▽ More
Spatial and temporal features are studied with respect to their predictive value for failure time prediction in subcritical failure with machine learning (ML). Data are generated from simulations of a novel, brittle random fuse model (RFM), as well as elasto-plastic finite element simulations (FEM) of a stochastic plasticity model with damage, both models considering stochastic thermally activated damage/failure processes in disordered materials. Fuse networks are generated with hierarchical and nonhierarchical architectures. Random forests - a specific ML algorithm - allow us to measure the feature importance through a feature's average error reduction. RFM simulation data are found to become more predictable with increasing system size and temperature. Increasing the load or the scatter in local materials properties has the opposite effect. Damage accumulation in these models proceeds in stochastic avalanches, and statistical signatures such as avalanche rate or magnitude have been discussed in the literature as predictors of incipient failure. However, in the present study such features proved of no measurable use to the ML models, which mostly rely on global or local strain for prediction. This suggests the strain as viable quantity to monitor in future experimental studies as it is accessible via digital image correlation.
△ Less
Submitted 14 August, 2022;
originally announced August 2022.
-
Enhanced fault-tolerance in biomimetic hierarchical materials -- a simulation study
Authors:
Seyyed Ahmad Hosseini,
Paolo Moretti,
Michael Zaiser
Abstract:
Hierarchical microstructures are often invoked to explain the high resilience and fracture toughness of biological materials such as bone and nacre. Biomimetic material models inspired by those structural arrangements face the obvious challenge of capturing their inherent multi-scale complexity, both in experiments and in simulations. To study the influence of hierarchical microstructural patterns…
▽ More
Hierarchical microstructures are often invoked to explain the high resilience and fracture toughness of biological materials such as bone and nacre. Biomimetic material models inspired by those structural arrangements face the obvious challenge of capturing their inherent multi-scale complexity, both in experiments and in simulations. To study the influence of hierarchical microstructural patterns in fracture behavior, we propose a large scale three-dimensional hierarchical beam-element simulation framework, where we generalize the constitutive behavior of Timoshenko beam elasticity and Maximum Distortion Energy Theory failure criteria to the complex case of hierarchical networks of approximately 5 million elements. We perform a statistical study of stress-strain relationships and fracture surface mophologies, and conclude that hierarchical systems are capable of arresting crack propagation, an ability that reduces their sensitivity to pre-existing damage and enhances their fault tolerance compared to reference generic fibrous materials.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Relating plasticity to dislocation properties by data analysis: scaling vs. machine learning approaches
Authors:
Stefan Hiemer,
Haidong Fan,
Michael Zaiser
Abstract:
Plasticity modelling has long been based on phenomenological models based on ad-hoc assuption of constitutive relations, which are then fitted to limited data. Other work is based on the consideration of physical mechanisms which seek to establish a physical foundation of the observed plastic deformation behavior through identification of isolated defect processes ('mechanisms') which are observed…
▽ More
Plasticity modelling has long been based on phenomenological models based on ad-hoc assuption of constitutive relations, which are then fitted to limited data. Other work is based on the consideration of physical mechanisms which seek to establish a physical foundation of the observed plastic deformation behavior through identification of isolated defect processes ('mechanisms') which are observed either experimentally or in simulations and then serve to formulate so-called physically based models. Neither of these approaches is adequate to capture the complexity of plastic deformation which belongs into the realm of emergent collective phenomena, and to understand the complex interplay of multiple deformation pathways which is at the core of modern high performance structural materials. Data based approaches offer alternative pathways towards plasticity modelling whose strengths and limitations we explore here for a simple example, namely the interplay between rate and dislocation density dependent strengthening mechanisms in fcc metals.
△ Less
Submitted 3 June, 2022;
originally announced June 2022.
-
A computationally efficient implementation of continuum dislocation dynamics: Formulation and application to ultrafine-grained Mg polycrystals
Authors:
Xi Luo,
Michael Zaiser
Abstract:
Continuum dislocation dynamics (CDD) represents the evolution of systems of curved and connected dislocation lines in terms of density-like field variables which include the volume density of loops (or 'curvature density') as an additional field. Since dislocation curvature represents a spatial derivative of the underlying discrete dislocation density tensor, the curvature field evolution equation…
▽ More
Continuum dislocation dynamics (CDD) represents the evolution of systems of curved and connected dislocation lines in terms of density-like field variables which include the volume density of loops (or 'curvature density') as an additional field. Since dislocation curvature represents a spatial derivative of the underlying discrete dislocation density tensor, the curvature field evolution equation of necessity contains numerically inconvenient higher-order derivatives of the density fields. We propose a simple approximation to express curvature in terms of density fields, and demonstrate its application to a benchmark problem in deformation of Mg polycrystals.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Predicting the failure of two-dimensional silica glasses
Authors:
Francesc Font-Clos,
Marco Zanchi,
Stefan Hiemer,
Silvia Bonfanti,
Roberto Guerra,
Michael Zaiser,
Stefano Zapperi
Abstract:
Being able to predict the failure of materials based on structural information is a fundamental issue with enormous practical and industrial relevance for the monitoring of devices and components. Thanks to recent advances in deep learning, accurate failure predictions are becoming possible even for strongly disordered solids, but the sheer number of parameters used in the process renders a physic…
▽ More
Being able to predict the failure of materials based on structural information is a fundamental issue with enormous practical and industrial relevance for the monitoring of devices and components. Thanks to recent advances in deep learning, accurate failure predictions are becoming possible even for strongly disordered solids, but the sheer number of parameters used in the process renders a physical interpretation of the results impossible. Here we address this issue and use machine learning methods to predict the failure of simulated two dimensional silica glasses from their initial undeformed structure. We then exploit Gradient-weighted Class Activation Map** (Grad-CAM) to build attention maps associated with the predictions, and we demonstrate that these maps are amenable to physical interpretation in terms of topological defects and local potential energies. We show that our predictions can be transferred to samples with different shape or size than those used in training, as well as to experimental images. Our strategy illustrates how artificial neural networks trained with numerical simulation results can provide interpretable predictions of the behavior of experimentally measured structures.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Atomistic aspects of load transfer and fracture in CNT-reinforced aluminium
Authors:
Samaneh Nasiri,
Kai Wang,
Mingjun Yang,
Julien Guénolé,
Qianqian Li,
Michael Zaiser
Abstract:
This paper describes atomistic simulations of deformation and fracture of Al reinforced with carbon nanotubes (CNTs). We use density functional theory (DFT) to understand the energetics of Al-graphene interfaces and gain reference data for the parameterization of Al-C empirical potentials. We then investigate the load transfer between CNTs and Al and its effect on composite strengthening. To this…
▽ More
This paper describes atomistic simulations of deformation and fracture of Al reinforced with carbon nanotubes (CNTs). We use density functional theory (DFT) to understand the energetics of Al-graphene interfaces and gain reference data for the parameterization of Al-C empirical potentials. We then investigate the load transfer between CNTs and Al and its effect on composite strengthening. To this end, we perform uniaxial tensile simulations of an Al crystal reinforced with CNTs of various volume fractions. We also study the interaction of the embedded CNTs with a crack. We show that the interaction between CNTs and Al is weak such that, under tensile loading, CNTs can easily slide inside the Al matrix and get pulled out from the cracked surface. This effect is almost independent of CNT length and volume fraction. Little load transfer and consequently no crack bridging are observed during the simulation of pristine CNTs threading the crack surfaces. CNTs that are geometrically fixated inside Al, on the other hand, can increase the fracture stress and enhance plastic dissipation in the matrix. CNTs located in front of a growing crack blunt the crack and induce plastic deformation of the Al matrix. Depending on the CNT orientation, these processes can either increase or decrease the failure stress of the composite.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Pinning of extended dislocations in atomically disordered crystals
Authors:
Aviral Vaid,
De'an Wei,
Erik Bitzek,
Samaneh Nasiri,
Michael Zaiser
Abstract:
In recent years there has been renewed interest in the behavior of dislocations in crystals that exhibit strong atomic scale disorder, as typical of compositionally complex single phase alloys. The behavior of dislocations in such crystals has been often studied in the framework of elastic manifold pinning in disordered systems. Here we discuss modifications of this framework that may need to be a…
▽ More
In recent years there has been renewed interest in the behavior of dislocations in crystals that exhibit strong atomic scale disorder, as typical of compositionally complex single phase alloys. The behavior of dislocations in such crystals has been often studied in the framework of elastic manifold pinning in disordered systems. Here we discuss modifications of this framework that may need to be adapted when dealing with extended dislocations that split into widely separated partials. We demonstrate that the presence of a stacking fault gives rise to an additional stress scale that needs to be compared with the pinning stress of elastic manifold theory to decide whether the partials are pinned individually or the dislocation is pinned as a whole. For the case of weakly interacting partial dislocations, we demonstrate the existence of multiple metastable states at stresses below the depinning threshold and analyze the stress evolution of the stacking fault width during loading. In addition we investigate how geometrical constraints can modulate the dislocation-solute interaction and enhance the pinning stress. We compare our theoretical arguments with results of atomistic and discrete (partial) dislocation dynamics (D(P)DD) simulations.
△ Less
Submitted 24 October, 2021;
originally announced October 2021.
-
Pinning of dislocations in disordered alloys: Effects of dislocation orientation
Authors:
Michael Zaiser,
Ronghai Wu
Abstract:
The current interest in compositionally complex alloys including so called high entropy alloys has caused renewed interest in the general problem of solute hardening. It has been suggested that this problem can be addressed by treating the alloy as an effective medium containing a random distribution of dilatation and compression centers representing the volumetric misfit of atoms of different spe…
▽ More
The current interest in compositionally complex alloys including so called high entropy alloys has caused renewed interest in the general problem of solute hardening. It has been suggested that this problem can be addressed by treating the alloy as an effective medium containing a random distribution of dilatation and compression centers representing the volumetric misfit of atoms of different species. The mean square stresses arising from such a random distribution can be calculated analytically, their spatial correlations are strongly anisotropic and exhibit long-range tails with third-order power law decay. Here we discuss implications of the anisotropic and long-range nature of the correlation functions for the pinning of dislocations of arbitrary orientation. While edge dislocations are found to follow the standard pinning paradigm, for dislocations of near screw orientation we demonstrate the co-existence of two types of pinning energy minima.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Dislocation-CNT Interactions in Aluminium at the Atomic Level
Authors:
Samaneh Nasiri,
Michael Zaiser
Abstract:
The interaction between edge dislocations and carbon nanotubes (CNTs) embedded into an Al matrix is investigated. Both pristine and Ni-coated CNTs are considered. It is demonstrated that the embedded CNTs lead to a flow stress contribution equivalent to that of an array of non-shearable inclusions that are by-passed via the Orowan mechanism. The strain hardening mechanism associated with multiple…
▽ More
The interaction between edge dislocations and carbon nanotubes (CNTs) embedded into an Al matrix is investigated. Both pristine and Ni-coated CNTs are considered. It is demonstrated that the embedded CNTs lead to a flow stress contribution equivalent to that of an array of non-shearable inclusions that are by-passed via the Orowan mechanism. The strain hardening mechanism associated with multiple dislocation passes shows, however, characteristic differences from the Orowan picture that indicate that the embedded CNTs behave analogous to embedded voids.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Thermodynamic considerations on a class of dislocation-based constitutive models
Authors:
Ronghai Wu,
Michael Zaiser
Abstract:
Dislocations are the main carriers of plastic deformation in crystalline materials. Physically based constitutive equations of crystal plasticity typically incorporate dislocation mechanisms, using a dislocation density based description of dislocation microstructure evolution and plastic flow. Typically, such constitutive models are not formulated in a thermodynamic framework. Nevertheless, funda…
▽ More
Dislocations are the main carriers of plastic deformation in crystalline materials. Physically based constitutive equations of crystal plasticity typically incorporate dislocation mechanisms, using a dislocation density based description of dislocation microstructure evolution and plastic flow. Typically, such constitutive models are not formulated in a thermodynamic framework. Nevertheless, fundamental considerations of thermodynamic consistency impose constraints on the admissible range of model parameters and/or on the range of application of such models. In particular, it is mandatory to ensure that the internal energy increase associated with dislocation accumulation is properly accounted for in the local energy balance. We demonstrate on some examples taken from the literature how failure to do so can lead to constitutive equations that violate the first and second laws of thermodynamics either generally or in some particular limit cases, and we discuss how to formulate constraints that recover thermodynamic consistency.
△ Less
Submitted 27 June, 2021;
originally announced June 2021.
-
Prediction of creep failure time using machine learning
Authors:
Soumyajyoti Biswas,
David F. Castellanos,
Michael Zaiser
Abstract:
A subcritical load on a disordered material can induce creep damage. The creep rate in this case exhibits three temporal regimes viz. an initial decelerating regime followed by a steady-state regime and a stage of accelerating creep that ultimately leads to catastrophic breakdown. Due to the statistical regularities in the creep rate, the time evolution of creep rate has often been used to predict…
▽ More
A subcritical load on a disordered material can induce creep damage. The creep rate in this case exhibits three temporal regimes viz. an initial decelerating regime followed by a steady-state regime and a stage of accelerating creep that ultimately leads to catastrophic breakdown. Due to the statistical regularities in the creep rate, the time evolution of creep rate has often been used to predict residual lifetime until catastrophic breakdown. However, in disordered samples, these efforts met with limited success. Nevertheless, it is clear that as the failure is approached, the damage become increasingly spatially correlated, and the spatio-temporal patterns of acoustic emission, which serve as a proxy for damage accumulation activity, are likely to mirror such correlations. However, due to the high dimensionality of the data and the complex nature of the correlations it is not straightforward to identify the said correlations and thereby the precursory signals of failure. Here we use supervised machine learning to estimate the remaining time to failure of samples of disordered materials. The machine learning algorithm uses as input the temporal signal provided by a mesoscale elastoplastic model for the evolution of creep damage in disordered solids. Machine learning algorithms are well-suited for assessing the proximity to failure from the time series of the acoustic emissions of sheared samples. We show that materials are relatively more predictable for higher disorder while are relatively less predictable for larger system sizes. We find that machine learning predictions, in the vast majority of cases, perform substantially better than other prediction approaches proposed in the literature.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Multilayer Structures of Graphene and Pt Nanoparticles -- a Multiscale Computational Study
Authors:
Samaneh Nasiri,
Christian Greff,
Kai Wang,
Mingjun Yang,
Qianqian Li,
Paolo Moretti,
Michael Zaiser
Abstract:
We report results of a multiscale simulation study of multilayer structures consisting of graphene sheets with embedded Pt nanoparticles. Density functional theory is used to understand the energetics of Pt-graphene interfaces and provide reference data for the parameterization of a Pt-graphene interaction potential. Molecular dynamics simulations then provide the conformation and energetics of gr…
▽ More
We report results of a multiscale simulation study of multilayer structures consisting of graphene sheets with embedded Pt nanoparticles. Density functional theory is used to understand the energetics of Pt-graphene interfaces and provide reference data for the parameterization of a Pt-graphene interaction potential. Molecular dynamics simulations then provide the conformation and energetics of graphene sheets with embedded Pt nanoparticles of varying density, form and size. These results are interpreted using a continuum mechanical model of sheet deformation, and serve to parameterize a meso-scale Monte Carlo model to investigate the question under which conditions the free volume around the Pt nanoparticles forms a percolating cluster, such that the structures can be used in catalytic applications. We conclude with a discussion of potential applications of such multilayer structures.
△ Less
Submitted 25 April, 2020;
originally announced April 2020.
-
Strain rate dependency of dislocation plasticity
Authors:
Haidong Fan,
Jaafar A. El-Awady,
Qingyuan Wang,
Dierk Raabe,
Michael Zaiser
Abstract:
Dislocation slip is a general deformation mode and governs the strength of metals. Via discrete dislocation dynamics and molecular dynamics simulations, we investigate the strain rate and dislocation density dependence of the strength of bulk copper single crystals using 192 simulations spanning over 10 orders of magnitude in strain rate and 9 orders of magnitude in dislocation density. Based on t…
▽ More
Dislocation slip is a general deformation mode and governs the strength of metals. Via discrete dislocation dynamics and molecular dynamics simulations, we investigate the strain rate and dislocation density dependence of the strength of bulk copper single crystals using 192 simulations spanning over 10 orders of magnitude in strain rate and 9 orders of magnitude in dislocation density. Based on these large set of simulations and theoretical analysis, a new analytical relationship between material strength, dislocation density, strain rate and dislocation mobility is proposed, which is in excellent agreement with the current simulations as well as with experimental data. The results show that the material strength is a non-monotonic function of dislocation density and displays two universal regimes (first decreasing, then increasing) as the dislocation density increases. The first regime is a result of strain rate hardening, while the second regime is dominated by the classical Taylor forest hardening. Accordingly, the strength displays universally, as a function of strain rate, a rate-independent regime at low strain rates (governed by forest hardening) followed by a rate hardening regime at high strain rates (governed by strain rate hardening). All the results can be captured by a single scaling function. Finally, the fluctuations of dislocation flow are analyzed in terms of the strain rate dependent distribution of dislocation segment velocities. It is found that the fluctuations are governed by another universal scaling function and diverge in the rate independent limit, indicating a critical behavior. The current analysis provides a comprehensive understanding on how collective dislocation motions are governed by the competition between the internal elastic interactions of dislocations, and the stress required to drive dislocation fluxes at a given externally imposed strain rate.
△ Less
Submitted 20 March, 2020;
originally announced March 2020.
-
Constitutive modeling of the tension-compression behavior of gradient structured materials
Authors:
Jianfeng Zhao,
Xiaochong Lu,
**ling Liu,
Chen Bao,
Guozheng Kang,
Michael Zaiser,
Xu Zhang
Abstract:
Gradient structured (GS) metals processed by severe plastic deformation techniques can be designed to achieve simultaneously high strength and high ductility. Significant kinematic hardening is key to their excellent strain hardening capacity which results in a favorable strength-ductility combination. Unfortunately, no constitutive model has been established to simulate and analyze the characteri…
▽ More
Gradient structured (GS) metals processed by severe plastic deformation techniques can be designed to achieve simultaneously high strength and high ductility. Significant kinematic hardening is key to their excellent strain hardening capacity which results in a favorable strength-ductility combination. Unfortunately, no constitutive model has been established to simulate and analyze the characteristic kinematic hardening behavior of GS metal to understand the relationship between their microstructure and macroscopic response. In this work, we developed a deformation-mechanismbased strain gradient plasticity model considering the plasticity heterogeneities from the grain to the sample scale. A back stress model, which accounts for the dependency of dislocation pile-ups on grain size, is established to describe the cyclic deformation properties of GS materials. The established model unified the geometrically necessary dislocations accommodating internal plasticity heterogeneities, the resulting back stress and reversible dislocations during reverse loading into a strain gradient plasticity framework, without introducing excessive numbers of independent material parameters. A finite element implementation of the model quantitatively predicts the uniaxial tensile and tensile-compressive responses of a GS copper bar as well as of a reference sample with homogeneous grain size. It is found that GS copper exhibits enhanced kinematic hardening which results mainly from fine grains in the GS layer and contributes to the considerable ductility of the GS material. The model allows to investigate the mechanical response and optimize the properties of materials with various types of spatially heterogeneous grain microstructures.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
Avalanche dynamics in hierarchical fiber bundles
Authors:
Soumyajyoti Biswas,
Michael Zaiser
Abstract:
Heterogeneous materials are often organized in a hierarchical manner, where a basic unit is repeated over multiple scales.The structure then acquires a self-similar pattern. Examples of such structure are found in various biological and synthetic materials. The hierarchical structure can have significant consequences for the failure strength and the mechanical response of such systems. Here we con…
▽ More
Heterogeneous materials are often organized in a hierarchical manner, where a basic unit is repeated over multiple scales.The structure then acquires a self-similar pattern. Examples of such structure are found in various biological and synthetic materials. The hierarchical structure can have significant consequences for the failure strength and the mechanical response of such systems. Here we consider a fiber bundle model with hierarchical structure and study the effect of the self-similar arrangement on the avalanche dynamics exhibited by the model during the approach to failure. We show that the failure strength of the model generally decreases in a hierarchical structure, as opposed to the situation where no such hierarchy exists. However, we also report a special arrangement of the hierarchy for which the failure threshold could be substantially above that of a non hierarchical reference structure.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Statistical dynamics of early creep stages in disordered materials
Authors:
David Fernandez Castellanos,
Michael Zaiser
Abstract:
When materials are loaded below their short-term strength over extended periods, a slow time-dependent process known as creep deformation takes place. During creep deformation, the structural properties of a material evolve as a function of time. By means of a generic coarse-grained mesoscopic elastoplastic model which envisages deformation as a sequence of stochastically activated discrete events…
▽ More
When materials are loaded below their short-term strength over extended periods, a slow time-dependent process known as creep deformation takes place. During creep deformation, the structural properties of a material evolve as a function of time. By means of a generic coarse-grained mesoscopic elastoplastic model which envisages deformation as a sequence of stochastically activated discrete events, we study the creep deformation of disordered materials. We find that the structural evolution of the material during creep modifies not only the average material properties but also changes the statistics of those properties. We analyze the emergence of correlations in the strain localization and deformation activity patterns, the variation of the event rate and the evolution of the inter-event time distribution. We find that the event rate follows the Omori law of aftershocks, which is the discrete counterpart of Andrade's transient creep law, and that the exponent of these laws only depends on the microstructural heterogeneity. Finally, we find during the initial stages of transient creep a transition from Poisson distributed inter-event times towards a non-trivial power law distribution.
△ Less
Submitted 4 March, 2019; v1 submitted 1 March, 2019;
originally announced March 2019.
-
Grain boundary effect on nanoindentation: A multiscale discrete dislocation dynamics model
Authors:
Songjiang Lu,
Bo Zhang,
Xiangyu Li,
Junwen Zhao,
Michael Zaiser,
Haidong Fan,
Xu Zhang
Abstract:
Nanoindentation is a convenient method to investigate the mechanical properties of materials on small scales by utilizing low loads and small indentation depths. However, the effect of grain boundaries (GB) on the nanoindentation response remains unclear and needs to be studied by investigating in detail the interactions between dislocations and GBs during nanoindentation. In the present work, we…
▽ More
Nanoindentation is a convenient method to investigate the mechanical properties of materials on small scales by utilizing low loads and small indentation depths. However, the effect of grain boundaries (GB) on the nanoindentation response remains unclear and needs to be studied by investigating in detail the interactions between dislocations and GBs during nanoindentation. In the present work, we employ a three-dimensional multiscale modeling framework, which couples three-dimensional discrete dislocation dynamics (DDD) with the Finite Element method (FEM) to investigate GB effects on the nanoindentation behavior of an aluminum bicrystal. The interaction between dislocations and GB is physically modeled in terms of a penetrable GB, where piled-up dislocations can penetrate through the GB and dislocation debris at GBs can emit full dislocations into grains. In the simulation, we confirmed two experimentally observed phenomena, namely, pop-in events and the dependence of indentation hardness on the distance from GB. Two pop-in events were observed, of which the initial pop-in event is correlated with the activation and multiplication of dislocations, while the GB pop-in event results from dislocation transmission through the GB. By changing the distance between the indenter and GB, the simulation shows that the indentation hardness increases with decreasing GB-indenter distance. A quantitative model has been formulated which relates the dependency of indentation hardness on indentation depth and on GB-indenter distance to the back stress created by piled-up geometrically necessary dislocations in the plastic zone and to the additional constraint imposed by the GB on the plastic zone size.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
Microplasticity and yielding in crystals with heterogeneous dislocation distribution
Authors:
Xu Zhang,
Jian Xiong,
Haidong Fan,
Michael Zaiser
Abstract:
In this study, we use discrete dislocation dynamics (DDD) simulation to investigate the effect of heterogeneous dislocation density on the transition between quasi-elastic deformation and plastic flow in face-centered cubic single crystals. By analyzing the stress-strain curves of samples with an initial, axial dislocation density gradient, we arrive at the following conclusions: (i) in the regime…
▽ More
In this study, we use discrete dislocation dynamics (DDD) simulation to investigate the effect of heterogeneous dislocation density on the transition between quasi-elastic deformation and plastic flow in face-centered cubic single crystals. By analyzing the stress-strain curves of samples with an initial, axial dislocation density gradient, we arrive at the following conclusions: (i) in the regime of quasi-elastic deformation before the onset of plastic flow, the effective elastic modulus of the simulated samples falls significantly below the value for a dislocation-free crystal. This modulus reduction increases with decreasing dislocation density gradient: crystals with homogeneous dislocation distribution are thus weakest in the quasi-elastic regime; (ii) the transition towards plastic flow occurs first in regions of reduced dislocation density. Therefore, the overall yield stress decreases with increasing dislocation density gradient; (iii) crystals with dislocation density gradient exhibit a more pronounced hardening stage during which stress is re-distributed onto stronger regions with higher dislocation density until the sample flows at a constant flow stress that is approximately independent on dislocation density gradient. We interpret these findings in terms of a continuum dislocation dynamics inspired model of dislocation density evolution that accounts for inversive dislocation motions. The transition between quasi-elastic and plastic deformation is interpreted as a transition from inversive to non-inversive dislocation motion, and the initial differences in elastic modulus are related to a density dependent polarizability of the dislocation system. The subsequent plastic flow behavior is analyzed in terms of a modified version of Mughrabi's composite model.
△ Less
Submitted 29 December, 2018;
originally announced December 2018.
-
Graph theoretical approaches for the characterization of damage in hierarchical materials
Authors:
Paolo Moretti,
Jakob Renner,
Ali Safari,
Michael Zaiser
Abstract:
We discuss the relevance of methods of graph theory for the study of damage in simple model materials described by the random fuse model. While such methods are not commonly used when dealing with regular random lattices, which mimic disordered but statistically homogeneous materials, they become relevant in materials with microstructures that exhibit complex multi-scale patterns. We specifically…
▽ More
We discuss the relevance of methods of graph theory for the study of damage in simple model materials described by the random fuse model. While such methods are not commonly used when dealing with regular random lattices, which mimic disordered but statistically homogeneous materials, they become relevant in materials with microstructures that exhibit complex multi-scale patterns. We specifically address the case of hierarchical materials, whose failure, due to an uncommon fracture mode, is not well described in terms of either damage percolation or crack nucleation-and-growth. We show that in these systems, incipient failure is accompanied by an increase in eigenvector localization and a drop in topological dimension. We propose these two novel indicators as possible candidates to monitor a system in the approach to failure. As such, they provide alternatives to monitoring changes in the precursory avalanche activity, which is often invoked as a candidate for failure prediction in materials which exhibit critical-like behavior at failure, but may not work in the context of hierarchical materials which exhibit scale-free avalanche statistics even very far from the critical load.
△ Less
Submitted 14 December, 2018;
originally announced December 2018.
-
Cyclic-loading microstructure-property relations from a mesoscale perspective: An example of single crystal Nickel-based superalloys
Authors:
Ronghai Wu,
Michael Zaiser
Abstract:
Past models of stress-strain response under cyclic loading mainly rely on macroscopic equations which consider microstructure evolution indirectly or simply discard microstructure information. Modern materials science, on the other hand, seeks quantitive descriptions for the relations between microstrucutre and loading response. In the present work, we show a promising mesoscale phase-field framew…
▽ More
Past models of stress-strain response under cyclic loading mainly rely on macroscopic equations which consider microstructure evolution indirectly or simply discard microstructure information. Modern materials science, on the other hand, seeks quantitive descriptions for the relations between microstrucutre and loading response. In the present work, we show a promising mesoscale phase-field framework which can describe co-evolution of phase/grain and defect microstructures, reveal microstructure mechanisms and simultaneously predict deformation properties as a natural outcome of microstrucuture interactions. The energy functionals for phase/grain and defect microstructures are constructed, followed by functional variation which leads to governing equations. Applying the developed framework to high temperature cyclic loading of single crystal Nickel-based superalloys, the simulated results show that cyclic loading-microstructure-property relations can be principally revealed. In the short term perspective (in one cycle), dislocations move back and forth, leading to cyclic loops consistent with characteristics observed in experiments. The plastic strains are one order of magnitude smaller than total strains, which explains why the cyclic loops are very "thin". In the long term perspective, all $γγ'$ microstructures exhibit directional coarsening similar to creep under zero cyclic loading ratio, with the extent of rafting slight dependent on cyclic waveform, period, etc. The plastic strains are sensitive to cyclic loading conditions both in terms of curve shape and in terms of magnitude.
△ Less
Submitted 30 August, 2018;
originally announced August 2018.
-
Properties of dislocation lines in crystals with strong atomic-scale disorder
Authors:
Jianhui Zhai,
Michael Zaiser
Abstract:
We use a discrete dislocation dynamics (DDD) approach to study the motion of a dislocation under strong stochastic forces that may cause bending and roughening of the dislocation line on scales that are comparable to the dislocation core radius. In such situations, which may be relevant in high entropy alloys (HEA) exhibiting strong atomic scale disorder, standard scaling arguments based upon a li…
▽ More
We use a discrete dislocation dynamics (DDD) approach to study the motion of a dislocation under strong stochastic forces that may cause bending and roughening of the dislocation line on scales that are comparable to the dislocation core radius. In such situations, which may be relevant in high entropy alloys (HEA) exhibiting strong atomic scale disorder, standard scaling arguments based upon a line tension approximation may be no longer adequate and corrections to scaling need to be considered. We first study the wandering of the dislocation under thermal Langevin forces. This leads to a linear stochastic differential equation which can be exactly solved. From the Fourier modes of the thermalized dislocation line we can directly deduce the scale dependent effective line tension. We then use this information to investigate the wandering of a dislocation in a crystal with spatial, time-independent ('quenched') disorder. We establish the pinning length and show how this length can be used as a predictor of the flow stress. Implications for the determination of flow stresses in HEA from molecular dynamics simulations are discussed.
△ Less
Submitted 25 July, 2018;
originally announced July 2018.
-
Avalanche behavior in creep failure of disordered materials
Authors:
David Fernandez Castellanos,
Michael Zaiser
Abstract:
We present a mesoscale elastoplastic model of creep in disordered materials which considers temperature-dependent stochastic activation of localized deformation events which are mutually coupled by internal stresses, leading to collective avalanche dynamics. We generalize this stochastic plasticity model by introducing damage in terms of a local strength that decreases, on statistical average, wit…
▽ More
We present a mesoscale elastoplastic model of creep in disordered materials which considers temperature-dependent stochastic activation of localized deformation events which are mutually coupled by internal stresses, leading to collective avalanche dynamics. We generalize this stochastic plasticity model by introducing damage in terms of a local strength that decreases, on statistical average, with increasing local plastic strain. As a consequence the model captures failure in terms of strain localization in a catastrophic shear band concomitant with a finite-time singularity of the creep rate. The statistics of avalanches in the run-up to failure is characterized by a decreasing avalanche exponent $τ$ that, at failure, approaches the value $τ= 1.5$ typical of a critical branching process. The average avalanche rate exhibits an inverse Omori law as a function of the time-to-failure, whereas the distribution of inter-avalanche times turns out to be consistent with the ETAS model of earthquake statistics.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
Cell structure formation in a two-dimensional density-based dislocation dynamics model
Authors:
Ronghai Wu,
Michael Zaiser
Abstract:
Cellular patterns formed by self-organization of dislocations are a most conspicuous feature of dislocation microstructure evolution during plastic deformation. To elucidate the physical mechanisms underlying dislocation cell structure formation, we use a minimal model for the evolution of dislocation densities under load. By considering only two slip systems in a plane strain setting, we arrive a…
▽ More
Cellular patterns formed by self-organization of dislocations are a most conspicuous feature of dislocation microstructure evolution during plastic deformation. To elucidate the physical mechanisms underlying dislocation cell structure formation, we use a minimal model for the evolution of dislocation densities under load. By considering only two slip systems in a plane strain setting, we arrive at a model which is easily amenable to analytical stability analysis and numerical simulation. We use this model to establish analytical stability criteria for cell structures to emerge, to investigate the dynamics of the patterning process and establish the mechanism of pattern wavelength selection. This analysis demonstrates an intimate relationship between hardening and cell structure formation, which appears as an almost inevitable corollary to strain hardening itself. Specific mechanisms such as cross slip, by contrast, turn out to be incidental to the formation of cellular patterns.
△ Less
Submitted 17 July, 2020; v1 submitted 15 March, 2018;
originally announced March 2018.
-
Avalanche precursors of failure in hierarchical fuse networks
Authors:
Paolo Moretti,
Bastien Dietemann,
Michael Zaiser
Abstract:
We study precursors of failure in hierarchical random fuse network models which can be considered as idealizations of hierarchical (bio)materials where fibrous assemblies are held together by multi-level (hierarchical) cross-links. When such structures are loaded towards failure, the patterns of precursory avalanche activity exhibit generic scale invariance: Irrespective of load, precursor activit…
▽ More
We study precursors of failure in hierarchical random fuse network models which can be considered as idealizations of hierarchical (bio)materials where fibrous assemblies are held together by multi-level (hierarchical) cross-links. When such structures are loaded towards failure, the patterns of precursory avalanche activity exhibit generic scale invariance: Irrespective of load, precursor activity is characterized by power-law avalanche size distributions without apparent cut-off, with power-law exponents that decrease continuously with increasing load. This failure behavior and the ensuing super-rough crack morphology differ significantly from the findings in non-hierarchical structures.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Annihilation and sources in continuum dislocation dynamics (CDD)
Authors:
Mehran Monavari,
Michael Zaiser
Abstract:
Continuum dislocation dynamics (CDD) aims at representing the evolution of systems of curved and connected dislocation lines in terms of density-like field variables. Here we discuss how the processes of dislocation multiplication and annihilation can be described within such a framework. We show that both processes are associated with changes in the volume density of dislocation loops: dislocatio…
▽ More
Continuum dislocation dynamics (CDD) aims at representing the evolution of systems of curved and connected dislocation lines in terms of density-like field variables. Here we discuss how the processes of dislocation multiplication and annihilation can be described within such a framework. We show that both processes are associated with changes in the volume density of dislocation loops: dislocation annihilation needs to be envisaged in terms of the merging of dislocation loops, while conversely dislocation multiplication is associated with the generation of new loops. Both findings point towards the importance of including the volume density of loops (or 'curvature density') as an additional field variable into continuum models of dislocation density evolution. We explicitly show how this density is affected by loop mergers and loop generation. The equations which result for the lowest order CDD theory allow us, after spatial averaging and under the assumption of unidirectional deformation, to recover the classical theory of Kocks and Mecking for the early stages of work hardening.
△ Less
Submitted 2 March, 2018; v1 submitted 12 September, 2017;
originally announced September 2017.
-
Deterministic and stochastic models of dislocation patterning
Authors:
Ronghai Wu,
Daniel Tüzes,
Péter Dusán Ispánovity,
István Groma,
Michael Zaiser
Abstract:
We study a continuum model of dislocation transport in order to investigate the formation of heterogeneous dislocation patterns. We propose a physical mechanism which relates the formation of heterogeneous patterns to the dynamics of a driven system which tries to minimize an internal energy functional while subject to dynamic constraints and state dependent friction. This leads us to a novel inte…
▽ More
We study a continuum model of dislocation transport in order to investigate the formation of heterogeneous dislocation patterns. We propose a physical mechanism which relates the formation of heterogeneous patterns to the dynamics of a driven system which tries to minimize an internal energy functional while subject to dynamic constraints and state dependent friction. This leads us to a novel interpretation which resolves the old 'energetic vs. dynamic' controversy regarding the physical origin of dislocation patterns. We demonstrate the robustness of the developed patterning scenario by considering the simplest possible case (plane strain, single slip) yet implementing the dynamics of the dislocation density evolution in two very different manners, namely (i) a hydrodynamic formulation which considers transport equations that are continuous in space and time while assuming a linear stress dependency of dislocation motion, and (ii) a stochastic cellular automaton implementation which assumes spatially and temporally discrete transport of discrete 'packets' of dislocation density which move according to an extremal dynamics. Despite the huge differences between both kinds of models, we find that the emergent patterns are mutually consistent and in agreement with the prediction of a linear stability analysis of the continuum model. We also show how different types of initial conditions lead to different intermediate evolution scenarios which, however, do not affect the properties of the fully developed patterns.
△ Less
Submitted 18 August, 2017;
originally announced August 2017.
-
Determining Cosserat constants of 2D cellular solids from beam models
Authors:
Stefan Liebenstein,
Michael Zaiser
Abstract:
We present results of a two-scale model of disordered cellular materials where we describe the microstructure in an idealized manner using a beam network model and then make a transition to a Cosserat-type continuum model describing the same material on the macroscopic scale. In such scale transitions, normally either bottom-up homogenization approaches or top-down reverse modelling strategies are…
▽ More
We present results of a two-scale model of disordered cellular materials where we describe the microstructure in an idealized manner using a beam network model and then make a transition to a Cosserat-type continuum model describing the same material on the macroscopic scale. In such scale transitions, normally either bottom-up homogenization approaches or top-down reverse modelling strategies are used in order to match the macro-scale Cosserat continuum to the micro-scale beam network. Here we use a different approach that is based on an energetically consistent continuization scheme that uses data from the beam network model in order to determine continuous stress and strain variables in a set of control volumes defined on the scale of the individual microstructure elements (cells) in such a manner that they form a continuous tessellation of the material domain. Stresses and strains are determined independently in all control volumes, and constitutive parameters are obtained from the ensemble of control volume data using a least-square error criterion. We show that this approach yields material parameters that are for regular honeycomb structures in close agreement with analytical results. For strongly disordered cellular structures, the thus parametrized Cosserat continuum produces results that reproduce the behavior of the micro-scale beam models both in view of the observed strain patterns and in view of the macroscopic response, including its size dependence.
△ Less
Submitted 14 August, 2017; v1 submitted 11 August, 2017;
originally announced August 2017.
-
A continuum approach to combined $γ/γ'$ evolution and dislocation plasticity in Nickel-based superalloys
Authors:
Ronghai Wu,
Michael Zaiser,
Stefan Sandfeld
Abstract:
Creep in single crystal Nickel-based superalloys has been a topic of interest since decades, and nowadays simulations are more and more able to complement experiments. In these alloys, the $γ/γ'$ phase microstructure co-evolves with the system of dislocations under load, and understanding the mutual interactions is essential for understanding the resulting creep properties. Predictive modeling thu…
▽ More
Creep in single crystal Nickel-based superalloys has been a topic of interest since decades, and nowadays simulations are more and more able to complement experiments. In these alloys, the $γ/γ'$ phase microstructure co-evolves with the system of dislocations under load, and understanding the mutual interactions is essential for understanding the resulting creep properties. Predictive modeling thus requires multiphysics frameworks capable of modeling and simulating both the phase and defect microstructures. To do so, we formulate a coupled model of phase-field evolution and continuum dislocation dynamics which adequately accounts for both statistically stored and geometrically necessary dislocations. The simulated $γ/γ'$ phase microstructure with four $γ'$ variants and co-evolving dislocation microstructure is found to be in good agreement with experimental observations. The creep strain curve is obtained as a natural by-product of the microstructure evolution equations without the need for additional parameter fitting. We perform simulations of $γ/γ'$ evolution for different dislocation densities and establish the driving forces for microstructure evolution by analyzing in detail the changes in different contributions to the elastic and chemical energy density. Together with comparisons between simulated and experimental creep curves this investigation reveals the mechanisms controlling the process of directional coarsening (rafting) and demonstrates that the kinetics of rafting significantly depends on characteristics of the dislocation microstructure. In addition to rafting under constant load, we investigate the effect of changes in loading conditions and explore the possibility of improving creep properties by pre-rafting along a different loading path.
△ Less
Submitted 8 February, 2017;
originally announced February 2017.
-
Size and Disorder Effects in Elasticity of Cellular Structures: From Discrete Models to Continuum Representations
Authors:
Stefan Liebenstein,
Stefan Sandfeld,
Michael Zaiser
Abstract:
Open cellular solids usually possess random microstructures that may contain a characteristic length scale, such as the cell size. This gives rise to size dependent mechanical properties where large systems behave differently from small systems. Furthermore, these structures are often irregular, which not only affects the size dependent behaviour but also leads to significant property variations a…
▽ More
Open cellular solids usually possess random microstructures that may contain a characteristic length scale, such as the cell size. This gives rise to size dependent mechanical properties where large systems behave differently from small systems. Furthermore, these structures are often irregular, which not only affects the size dependent behaviour but also leads to significant property variations among different microstructure realizations. The computational model for cellular microstructures is based on networks of Timoshenko beams. It is a computationally efficient approach allowing to obtain statistically representative averages from computing large numbers of realizations. For detailed analysis of the underlying deformation mechanisms an energetically consistent continuization method was developed which links the forces and displacements of discrete beam networks to equivalent spatially continuous stress and strain fields. This method is not only useful for evaluation and visualization purposes but also allows to perform ensemble averages of, e.g., continuous stress patterns - an analysis approach which is highly beneficial for comparisons and statistical analysis of microstructures with respect to different degrees of structural disorder.
△ Less
Submitted 2 January, 2018; v1 submitted 12 April, 2016;
originally announced April 2016.
-
Disorder is good for you: The influence of local disorder on strain localization and ductility of strain softening materials
Authors:
Dániel Tüzes,
Michael Zaiser,
Péter Dusán Ispánovity
Abstract:
We formulate a generic concept model for the deformation of a locally disordered, macroscopically homogeneous material which undergoes irreversible strain softening during plastic deformation. We investigate the influence of the degree of microstructural heterogeneity and disorder on the concomitant strain localization process (formation of a macroscopic shear band). It is shown that increased mic…
▽ More
We formulate a generic concept model for the deformation of a locally disordered, macroscopically homogeneous material which undergoes irreversible strain softening during plastic deformation. We investigate the influence of the degree of microstructural heterogeneity and disorder on the concomitant strain localization process (formation of a macroscopic shear band). It is shown that increased microstructural heterogeneity delays strain localization and leads to an increase of the plastic regime in the macroscopic stress-strain curves. The evolving strain localization patterns are characterized and compared to models of shear band formation published in the literature.
△ Less
Submitted 6 April, 2016;
originally announced April 2016.
-
The role of weakest links and system size scaling in multiscale modeling of stochastic plasticity
Authors:
Péter Dusán Ispánovity,
Dániel Tüzes,
Péter Szabó,
Michael Zaiser,
István Groma
Abstract:
Plastic deformation of crystalline and amorphous matter often involves intermittent local strain burst events. To understand the physical background of the phenomenon a minimal stochastic mesoscopic model was introduced, where microstructural details are represented by a fluctuating local yielding threshold. In the present paper, we propose a method for determining this yield stress distribution b…
▽ More
Plastic deformation of crystalline and amorphous matter often involves intermittent local strain burst events. To understand the physical background of the phenomenon a minimal stochastic mesoscopic model was introduced, where microstructural details are represented by a fluctuating local yielding threshold. In the present paper, we propose a method for determining this yield stress distribution by lower scale discrete dislocation dynamics simulations and using a weakest link argument. The success of scale-linking is demonstrated on the stress-strain curves obtained by the resulting mesoscopic and the discrete dislocation models. As shown by various scaling relations they are statistically equivalent and behave identically in the thermodynamic limit. The proposed technique is expected to be applicable for different microstructures and amorphous materials, too.
△ Less
Submitted 7 April, 2016; v1 submitted 6 April, 2016;
originally announced April 2016.
-
Dislocation patterning in a 2D continuum theory of dislocations
Authors:
Istvan Groma,
Michael Zaiser,
Peter Dusan Ispanovity
Abstract:
Understanding the spontaneous emergence of dislocation patterns during plastic deformation is a long standing challenge in dislocation theory. During the past decades several phenomenological continuum models of dislocation patterning were proposed, but few of them (if any) are derived from microscopic considerations through systematic and controlled averaging procedures. In this paper we present…
▽ More
Understanding the spontaneous emergence of dislocation patterns during plastic deformation is a long standing challenge in dislocation theory. During the past decades several phenomenological continuum models of dislocation patterning were proposed, but few of them (if any) are derived from microscopic considerations through systematic and controlled averaging procedures. In this paper we present a 2D continuum theory that is obtained by systematic averaging of the equations of motion of discrete dislocations. It is shown that in the evolution equations of the dislocation densities diffusion like terms neglected in earlier considerations play a crucial role in the length scale selection of the dislocation density fluctuations. It is also shown that the formulated continuum theory can be derived from an averaged energy functional using the framework of phase field theories. However, in order to account for the flow stress one has in that case to introduce a nontrivial dislocation mobility function, which proves to be crucial for the instability leading to patterning.
△ Less
Submitted 7 February, 2016; v1 submitted 28 January, 2016;
originally announced January 2016.
-
Universality of Avalanche Exponents in Plastic Deformation of Disordered Solids
Authors:
Zoe Budrikis,
David Fernandez-Castellanos,
Stefan Sandfeld,
Michael Zaiser,
Stefano Zapperi
Abstract:
Plastic yield of amorphous solids occurs by power law distributed slip avalanches whose universality is still debated. Determination of the power law exponents from experiments and molecular dynamics simulations is hampered by limited statistical sampling. On the other hand, while existing elasto-plastic depinning models give precise exponent values, these models to date have been limited to a sca…
▽ More
Plastic yield of amorphous solids occurs by power law distributed slip avalanches whose universality is still debated. Determination of the power law exponents from experiments and molecular dynamics simulations is hampered by limited statistical sampling. On the other hand, while existing elasto-plastic depinning models give precise exponent values, these models to date have been limited to a scalar approximation of plasticity which is difficult to reconcile with the statistical isotropy of amorphous materials. Here we introduce for the first time a fully tensorial mesoscale model for the elasto-plasticity of disordered media that can not only reproduce a wide variety of shear band patterns observed experimentally for different deformation modes, but also captures the avalanche dynamics of plastic flow in disordered materials. Slip avalanches are characterized by universal distributions which are quantitatively different from mean field predictions, both regarding the exponents and regarding the form of the scaling functions, and which are independent of system dimensionality (2D vs 3D), boundary and loading conditions, and uni-or biaxiality of the stress state. We also measure average avalanche shapes, which are equally universal and inconsistent with mean field predictions. Our results provide strong evidence that the universality class of plastic yield in amorphous materials is distinct from that of mean field depinning.
△ Less
Submitted 28 October, 2016; v1 submitted 19 November, 2015;
originally announced November 2015.
-
Continuum Representation of Systems of Dislocation Lines: A General Method for Deriving Closed-Form Evolution Equations
Authors:
Mehran Monavari,
Stefan Sandfeld,
Michael Zaiser
Abstract:
Plasticity is governed by the evolution of, in general anisotropic, systems of dislocations. We seek to faithfully represent this evolution in terms of density-like variables which average over the discrete dislocation microstructure. Starting from T. Hochrainer's continuum theory of dislocations (CDD), we introduce a methodology based on the 'Maximum Information Entropy Principle' (MIEP) for deri…
▽ More
Plasticity is governed by the evolution of, in general anisotropic, systems of dislocations. We seek to faithfully represent this evolution in terms of density-like variables which average over the discrete dislocation microstructure. Starting from T. Hochrainer's continuum theory of dislocations (CDD), we introduce a methodology based on the 'Maximum Information Entropy Principle' (MIEP) for deriving closed-form evolution equations for dislocation density measures of different order. These equations provide an optimum representation of the kinematic properties of systems of curved and connected dislocation lines with the information contained in a given set of density measures. The performance of the derived equations is benchmarked against other models proposed in the literature, using discrete dislocation dynamics simulations as a reference. As a benchmark problem we study dislocations moving in a highly heterogeneous, persistent slip-band-like geometry. We demonstrate that excellent agreement with discrete simulations can be obtained in terms of a very small number of averaged dislocation fields containing information about the edge and screw components of the total and excess (geometrically necessary) dislocation densities. From these the full dislocation orientation distribution which emerges as dislocations move through a channel-wall structure can be faithfully reconstructed.
△ Less
Submitted 19 May, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
Local density approximation for the energy functional of three-dimensional dislocation systems
Authors:
Michael Zaiser
Abstract:
The elastic energy functional of a system of discrete dislocation lines is well known from dislocation theory. In this paper we demonstrate how the discrete functional can be used to systematically derive approximations which express the elastic energy in terms of dislocation density-like variables which average over the discrete dislocation configurations and represent the dislocation system on s…
▽ More
The elastic energy functional of a system of discrete dislocation lines is well known from dislocation theory. In this paper we demonstrate how the discrete functional can be used to systematically derive approximations which express the elastic energy in terms of dislocation density-like variables which average over the discrete dislocation configurations and represent the dislocation system on scales above the spacing of the individual dislocation lines. We study the simple case of two-dimensional systems of straight dislocation lines before we proceed to derive energy functionals for systems of three-dimensionally curved dislocation lines pertaining to a single, as well as to multiple slip systems. We then illustrate several applications of the theory including Debye screening of dislocations in two and three dimensions, and the derivation of back stress and friction stress terms entering the stress balance from the free energy functionals.
△ Less
Submitted 5 November, 2015; v1 submitted 14 August, 2015;
originally announced August 2015.
-
Statistical Analysis and Stochastic Dislocation-Based Modelling of Microplasticity
Authors:
Olga Kapetanou,
Vasilis Koutsos,
Efstathios Theotokoglou,
Daniel Weygand,
Michael Zaiser
Abstract:
Plastic deformation in microscale differs from the macroscopic plasticity in two respects: (i) the flow stress of small samples depends on their size (ii) the scatter of plasticity increases significantly. In this work we focus on the scatter of plasticity. We statistically characterize the deformation process of micropillars under tension using results from discrete dislocation dynamics (DDD) sim…
▽ More
Plastic deformation in microscale differs from the macroscopic plasticity in two respects: (i) the flow stress of small samples depends on their size (ii) the scatter of plasticity increases significantly. In this work we focus on the scatter of plasticity. We statistically characterize the deformation process of micropillars under tension using results from discrete dislocation dynamics (DDD) simulations. We then propose a stochastic microplasticity model which uses the extracted information from the above statistical characterization to make statistical predictions regarding the micropillar stress-strain curves. This model aims to map the complex dynamics of interacting dislocations onto a stochastic processes involving the continuum variables of stress and strain. Therefore, it combines a classical continuum description of the elastic-plastic problem with a stochastic description of the discrete dislocation dynamics. We compare the model predictions with the underlying DDD simulations and outline potential future applications of the same modelling approach.
△ Less
Submitted 7 March, 2015; v1 submitted 28 January, 2015;
originally announced January 2015.
-
Pattern formation in a minimal model of continuum dislocation plasticity
Authors:
Stefan Sandfeld,
Michael Zaiser
Abstract:
The spontaneous emergence of heterogeneous dislocation patterns is a conspicuous feature of plastic deformation and strain hardening of crystalline solids. Despite long-standing efforts in the materials science and physics of defect communities, there is no general consensus regarding the physical mechanism which leads to the formation of dislocation patterns. In order to establish the fundamental…
▽ More
The spontaneous emergence of heterogeneous dislocation patterns is a conspicuous feature of plastic deformation and strain hardening of crystalline solids. Despite long-standing efforts in the materials science and physics of defect communities, there is no general consensus regarding the physical mechanism which leads to the formation of dislocation patterns. In order to establish the fundamental mechanism, we formulate an extremely simplified, minimal model to investigate the formation of patterns based on the continuum theory of fluxes of curved dislocations. We demonstrate that strain hardening as embodied in a Taylor-type dislocation density dependence of the flow stress, in conjunction with the structure of the kinematic equations that govern dislocation motion under the action of external stresses, is already sufficient for the formation of dislocation patterns that are consistent with the principle of similitude.
△ Less
Submitted 5 May, 2015; v1 submitted 14 January, 2015;
originally announced January 2015.
-
Propagating compaction bands in confined compression of snow: Experiment and Modelling
Authors:
T. W. Barraclough,
J. R. Blackford,
S. Liebenstein,
S. Sandfeld,
T. J. Stratford,
G. Weinländer,
M. Zaiser
Abstract:
We show that the plastic deformation of snow under uniaxial compression is characterized by complex spatio-temporal strain localization phenomena. Deformation is characterized by repeated nucleation and propagation of compaction bands. Compaction bands are also observed during the very first stage of compression of solid foams where a single band moves across the sample at approximately constant s…
▽ More
We show that the plastic deformation of snow under uniaxial compression is characterized by complex spatio-temporal strain localization phenomena. Deformation is characterized by repeated nucleation and propagation of compaction bands. Compaction bands are also observed during the very first stage of compression of solid foams where a single band moves across the sample at approximately constant stress. However, snow differs from these materials as repeated nucleation and propagation of bands occurs throughout the subsequent hardening stage until the end of the deformation experiment. Band nucleation and/or reflection of bands at the sample boundaries are accompanied by stress drops which punctuate the stress strain curve. A constitutive model is proposed which quantitatively reproduces all features of this oscillatory deformation mode. To this end, a well-established compressive plasticity framework for solid foams is generalized to account for shear softening behavior, time dependence of microstructure (`rapid sintering') and non-locality of damage processes in snow.
△ Less
Submitted 16 December, 2014;
originally announced January 2015.
-
Scaling Properties of Dislocation Simulations in the Similitude Regime
Authors:
Michael Zaiser,
Stefan Sandfeld
Abstract:
Dislocation systems exhibit well known scaling properties such as the Taylor relationship between flow stress and dislocation density, and the "law of similitude" linking the flow stress to the characteristic wavelength of dislocation patterns. Here we discuss the origin of these properties, which can be related to generic invariance properties of the equations of evolution of discrete dislocation…
▽ More
Dislocation systems exhibit well known scaling properties such as the Taylor relationship between flow stress and dislocation density, and the "law of similitude" linking the flow stress to the characteristic wavelength of dislocation patterns. Here we discuss the origin of these properties, which can be related to generic invariance properties of the equations of evolution of discrete dislocation systems, and their implications for a wide class of models of dislocation microstructure evolution. We demonstrate that under certain conditions dislocation simulations carried out at different stress, dislocation density, and strain rate can be considered as equivalent, and we study the range of deformation conditions ("similitude regime") over which this equivalence can be expected to hold. In addition, we discuss the restrictions imposed by the formulated invariance properties for density-based, nonlocal or stochastic models of dislocation microstructure evolution, and for dislocation patterns and size effects.
△ Less
Submitted 7 August, 2014; v1 submitted 1 April, 2014;
originally announced April 2014.
-
Deformation Patterns and Surface Morphology in a Minimal Model of Amorphous Plasticity
Authors:
Stefan Sandfeld,
Michael Zaiser
Abstract:
We investigate a minimal model of the plastic deformation of amorphous materials. The material elements are assumed to exhibit ideally plastic behavior (J2 plasticity). Structural disorder is considered in terms of random variations of the local yield stresses. Using a finite element implementation of this simple model, we simulate the plane-strain deformation of long thin rods loaded in tension.…
▽ More
We investigate a minimal model of the plastic deformation of amorphous materials. The material elements are assumed to exhibit ideally plastic behavior (J2 plasticity). Structural disorder is considered in terms of random variations of the local yield stresses. Using a finite element implementation of this simple model, we simulate the plane-strain deformation of long thin rods loaded in tension. The resulting strain patterns are statistically characterized in terms of their spatial correlation functions. Studies of the corresponding surface morphology reveal a non-trivial Hurst exponent of approx. 0.8, indicating the presence of long range correlations in the deformation patterns. The simulated deformation patterns and surface morphology exhibit persistent features which emerge already at the very onset of plastic deformation, while subsequent evolution is characterized by growth in amplitude without major morphology changes. The findings are compared to experimental observations.
△ Less
Submitted 28 February, 2014; v1 submitted 20 December, 2013;
originally announced December 2013.
-
Avalanches in 2D Dislocation Systems: Plastic Yielding is not Depinning
Authors:
Péter Dusán Ispánovity,
Lasse Laurson,
Michael Zaiser,
István Groma,
Stefano Zapperi,
Mikko J. Alava
Abstract:
We study the properties of strain bursts (dislocation avalanches) occurring in two-dimensional discrete dislocation dynamics models under quasistatic stress-controlled loading. Contrary to previous suggestions, the avalanche statistics differs fundamentally from predictions obtained for the depinning of elastic manifolds in quenched random media. Instead, we find an exponent τ=1 of the power-law d…
▽ More
We study the properties of strain bursts (dislocation avalanches) occurring in two-dimensional discrete dislocation dynamics models under quasistatic stress-controlled loading. Contrary to previous suggestions, the avalanche statistics differs fundamentally from predictions obtained for the depinning of elastic manifolds in quenched random media. Instead, we find an exponent τ=1 of the power-law distribution of slip or released energy, with a cut-off that increases exponentially with the applied stress and diverges with system size at all stresses. These observations demonstrate that the avalanche dynamics of 2D dislocation systems is scale-free at every applied stress and, therefore, can not be envisaged in terms of critical behavior associated with a depinning transition.
△ Less
Submitted 12 July, 2013;
originally announced July 2013.
-
Some Limitations of Dislocation Walls as Models for Plastic Boundary Layers
Authors:
Michael Zaiser,
Istvan Groma
Abstract:
It has recently become popular to analyze the behavior of excess dislocations in plastic deformation under the assumption that such dislocations are arranged into walls with periodic dislocation spacing along the wall direction. This assumption is made plausible by the fact that periodic walls represent minimum energy arrangements for dislocations of the same sign, and it allows to use the analyti…
▽ More
It has recently become popular to analyze the behavior of excess dislocations in plastic deformation under the assumption that such dislocations are arranged into walls with periodic dislocation spacing along the wall direction. This assumption is made plausible by the fact that periodic walls represent minimum energy arrangements for dislocations of the same sign, and it allows to use the analytically known short-ranged stress fields of such walls for analyzing the structure of plastic boundary layers. Here we show that unfortunately both the idea that dislocation walls are low-energy configurations and the properties of their interactions depend critically on the assumption of a periodic arrangement of dislocations within the walls. Once this assumption is replaced by a random arrangement, the properties of dislocation walls change completely.
△ Less
Submitted 10 September, 2011;
originally announced September 2011.
-
Critical behavior and size dependence in dislocation plasticity
Authors:
Valentina Beato,
Michael Zaiser,
Stefano Zapperi
Abstract:
Microcrystals deform very differently from their macroscopic counterparts, displaying a size-dependent yield stress and intermittent plastic strain bursts. Here we demonstrate that size effects and strain bursts may be just two different signatures of fundamental collective phenomena that govern the dynamics of dislocation systems on all scales. We confirm this conjecture by demonstrating agreemen…
▽ More
Microcrystals deform very differently from their macroscopic counterparts, displaying a size-dependent yield stress and intermittent plastic strain bursts. Here we demonstrate that size effects and strain bursts may be just two different signatures of fundamental collective phenomena that govern the dynamics of dislocation systems on all scales. We confirm this conjecture by demonstrating agreement between the results of 2D and 3D dislocation dynamics simulations and experimental results on compressed micropillars. Our results indicate that many peculiarities of small-sample plasticity may arise from the finite-size scaling properties of collective dislocation dynamics, rather than from changes in the physical mechanisms governing dislocation motion.
△ Less
Submitted 3 April, 2012; v1 submitted 17 June, 2011;
originally announced June 2011.
-
Size scaling of strength in thin film delamination
Authors:
Michael Zaiser
Abstract:
We investigate by numerical simulation the system size dependence of the shear delamination strength of thin elastic films. The films are connected to a rigid substrate by a disordered interface containing a pre-existing crack. The size dependence of the strength of this system is found to depend crucially on the crack shape. For circular cracks, we observe a crossover between a size-independent r…
▽ More
We investigate by numerical simulation the system size dependence of the shear delamination strength of thin elastic films. The films are connected to a rigid substrate by a disordered interface containing a pre-existing crack. The size dependence of the strength of this system is found to depend crucially on the crack shape. For circular cracks, we observe a crossover between a size-independent regime at large crack radii which is controlled by propagation of the pre-existing crack, and a size-dependent regime at small radii which is dominated by nucleation of new cracks in other locations. For cracks of finite width that span the system transversally, we observe for all values of the crack length a logarithmic system size dependence of the failure stress. The results are interpreted in terms of extreme value statistics.
△ Less
Submitted 20 January, 2011; v1 submitted 4 January, 2011;
originally announced January 2011.