-
Two-bunch seeding of soft X-ray free electron lasers
Authors:
E. Schneidmiller,
I. Zagorodnov
Abstract:
Seeded Free Electron Lasers (FELs) demonstrate a good performance and are successfully used in different user experiments in extreme ultraviolet and soft X-ray regimes. In this paper a simple modification of the seeding scenario is proposed relying on generation of two closely spaced bunches with very different properties: a low-current seeding bunch, and a high-current bunch that amplifies cohere…
▽ More
Seeded Free Electron Lasers (FELs) demonstrate a good performance and are successfully used in different user experiments in extreme ultraviolet and soft X-ray regimes. In this paper a simple modification of the seeding scenario is proposed relying on generation of two closely spaced bunches with very different properties: a low-current seeding bunch, and a high-current bunch that amplifies coherent radiation, produced by the seeding bunch. This approach eliminates different limitations and mitigates some harmful effects in the standard scenario. In particular, one can generate very high harmonic numbers with a moderate laser power in a simple high-gain harmonic generation (HGHG) scheme. Alternatively, in case of moderate harmonic numbers, one can strongly reduce the required laser power thus simplifying design of high repetition rate seeded FELs. An influence of beam dynamics effects (like nonlinearities of the longitudinal phase space of electron beams, coherent synchrotron radiation, longitudinal space charge, geometrical wakefields, microbunching instabilities etc.) on properties of output radiation (spectrum broadening, pedestals, stability) can be to a large extent reduced in the proposed scheme. In this paper we illustrate the operation of the two-bunch seeding scheme in HGHG configuration with realistic start-to-end simulations for the soft X-ray user facility FLASH. We show that nearly Fourier-limited multi-gigawatt pulses can be generated at 4 nm using the present compact design of the undulator system. With several thousand pulses per second this can be a unique source for photon science.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Wakefield assisted bunch compression in storage rings
Authors:
Sergey A. Antipov,
Ilya Agapov,
Igor Zagorodnov,
Francois Lemery
Abstract:
Equilibrium bunch lengths typical to modern day light sources of tens of picoseconds limit the spectral reach of superradiant approaches for exploring materials and biological samples. In particular, generation of terahertz radiation seems appealing for pump-probe experiments. Taking advantage of self-wakes generated by carefully chosen structure one can control the bunch length and shape the bunc…
▽ More
Equilibrium bunch lengths typical to modern day light sources of tens of picoseconds limit the spectral reach of superradiant approaches for exploring materials and biological samples. In particular, generation of terahertz radiation seems appealing for pump-probe experiments. Taking advantage of self-wakes generated by carefully chosen structure one can control the bunch length and shape the bunch profile to increase significantly the high-frequency spectral components. Numerical analysis indicates the presence of self-consistent steady states that can be obtained with passive corrugated or dielectric structures. This approach has potential applications for generating superradiant terahertz radiation and pulse sha** in circular accelerators.
△ Less
Submitted 27 April, 2023; v1 submitted 10 June, 2022;
originally announced June 2022.
-
Observation of harmonic lasing in the Angstrom regime at European XFEL
Authors:
E. A. Schneidmiller,
F. Brinker,
W. Decking,
L. Froehlich,
M. Guetg,
D. Noelle,
M. Scholz,
M. V. Yurkov,
I. Zagorodnov,
G. Geloni,
N. Gerasimova,
J. Gruenert,
J. Laksman,
J. Liu,
S. Karabekyan,
N. Kujala,
Th. Maltezopoulos,
I. Petrov,
L. Samoylova,
S. Serkez,
H. Sinn,
F. Wolff-Fabris
Abstract:
Harmonic lasing provides an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can generate a much more intense, stable, and narrow-band FEL beam. Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Sel…
▽ More
Harmonic lasing provides an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can generate a much more intense, stable, and narrow-band FEL beam. Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Self-Amplified Spontaneous Emission (SASE) FEL. This concept was tested at FLASH in the range of 4.5 - 15 nm and at PAL XFEL at 1 nm. In this paper we present recent results from the European XFEL where we successfully demonstrated harmonic lasing at 5.9 Angstrom and 2.8 Angstrom. In the latter case we obtained both 3rd and 5th harmonic lasing and, for the first time, operated a harmonic lasing cascade (5th-3rd-1st harmonics of the undulator). These results pave the way for reaching very high photon energies, up to 100 keV.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Accurate measurement of uncorrelated energy spread in electron beam
Authors:
Sergey Tomin,
Igor Zagorodnov,
Winfried Decking,
Nina Golubeva,
Matthias Scholz
Abstract:
We present measurements of slice energy spread at the injector section of the European X-Ray Free Electron Laser for an electron bunch with charge of 250 pC. Two methods considered in the paper are based on measurements at the dispersive section after a transverse deflecting structure (TDS). The first approach uses measurements at different beam energies. We show that with a proper scaling of the…
▽ More
We present measurements of slice energy spread at the injector section of the European X-Ray Free Electron Laser for an electron bunch with charge of 250 pC. Two methods considered in the paper are based on measurements at the dispersive section after a transverse deflecting structure (TDS). The first approach uses measurements at different beam energies. We show that with a proper scaling of the TDS voltage with the beam energy the rms error of the measurement is less than 0.3 keV for the energy spread of 6 keV. In the second approach we demonstrate that kee** the beam energy constant but adjusting only the optics we are able to simplify the measurement complexity and to reduce the rms error below 0.1 keV. The accuracy of the measurement is confirmed by numerical modelling including beam transport effects and collective beam dynamics of the electron beam. The slice energy spread measured at the European XFEL for the beam charge of 250 pC is nearly 3 times lower as the one reported recently at SwissFEL for the same cathode material and the beam charge of 200 pC.
△ Less
Submitted 22 March, 2021;
originally announced March 2021.
-
Experimental validation of collective effects modeling at injector section of x-ray free-electron laser
Authors:
Igor Zagorodnov,
Sergey Tomin,
Ye Chen,
Frank Brinker
Abstract:
We consider the collective beam dynamics at the injector section of the European XFEL. The results of the measurements for the longitudinal phase space (LPS) of the electron beam are compared with those obtained from numerical modeling. A new approach is proposed for the analysis of the self-field effects in the LPS measurements. It allows to determine accurately the synchronous RF phase in an acc…
▽ More
We consider the collective beam dynamics at the injector section of the European XFEL. The results of the measurements for the longitudinal phase space (LPS) of the electron beam are compared with those obtained from numerical modeling. A new approach is proposed for the analysis of the self-field effects in the LPS measurements. It allows to determine accurately the synchronous RF phase in an accelerating module and to subtract properly the RF curvature imprinted in the LPS. A further incorporation with the simulation made it possible to separate the collective effects originating from different sources and thus to quantify, individually, the impact of these effects on the beam dynamics. This includes the space-charge dominated beam dynamics in the RF gun as well as the collective effects dominated by the wake fields after the gun up to the end of the injector section. A new analytical model is also proposed for the short-range wake function of a finite chain of RF cavities and verified by both numerical analysis and experimental results. It is shown that the physical models used in the simulation of the beam dynamics after the gun allow to reduce the absolute error in the modeling of the correlated energy chirp by order of magnitude in comparison with the case when the collective effects after the gun are neglected.
△ Less
Submitted 28 December, 2020; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Axial representation of external electromagnetic fields for particle tracking in accelerators
Authors:
Igor Zagorodnov,
Martin Dohlus
Abstract:
We derive a power series representation of an arbitrary electromagnetic field near some axis through the coaxial field components on the axis. The obtained equations are compared with Fourier-Bessel series approach and verified by several examples. It is shown that for each azimuthal mode we need only two real functions on the axis in order to describe the field in a source free region near to it.…
▽ More
We derive a power series representation of an arbitrary electromagnetic field near some axis through the coaxial field components on the axis. The obtained equations are compared with Fourier-Bessel series approach and verified by several examples. It is shown that for each azimuthal mode we need only two real functions on the axis in order to describe the field in a source free region near to it. The representation of dipole mode in a superconducting radio-frequency gun is analyzed.
△ Less
Submitted 8 September, 2019;
originally announced September 2019.
-
Passive Ballistic Microbunching of Non-Ultrarelativistic Electron Bunches using Electromagnetic Wakefields in Dielectric-Lined Waveguides
Authors:
Francois Lemery,
Philippe Piot,
Gayane Amatuni,
Prach Boonpornprasert,
Ye Lining Chen,
James David Good,
Bagrat Grigoryan,
Matthias Gross,
Mikhail Krasilnikov,
Osip Lishilin,
Gregor Loisch,
Anne Oppelt,
Sebastian Philipp,
Houjun Qian,
Yves Renier,
Frank Stephan,
Igor Zagorodnov
Abstract:
Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this…
▽ More
Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this Letter we propose and experimentally demonstrate a passive microbunching technique capable of forming a picosecond bunch train at $\sim 6$~MeV. The method relies on the excitation of electromagnetic wakefields as the beam propagates through a dielectric-lined waveguide. Owing to the non-ultrarelativistic nature of the beam, the induced energy modulation eventually converts into a density modulation as the beam travels in a following free-space drift. The modulated beam is further accelerated to $\sim20$~MeV while preserving the imparted density modulation.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Impedances of Anisotropic Round and Rectangular Chambers
Authors:
Igor Zagorodnov
Abstract:
We consider the calculation of electromagnetic fields generated by an electron bunch passing through an anisotropic transversally non-homogeneous vacuum chamber of round or rectangular cross-section with translational symmetry in the beam direction. The described algorithms are implemented in a numerical code and cross-checked on several examples.
We consider the calculation of electromagnetic fields generated by an electron bunch passing through an anisotropic transversally non-homogeneous vacuum chamber of round or rectangular cross-section with translational symmetry in the beam direction. The described algorithms are implemented in a numerical code and cross-checked on several examples.
△ Less
Submitted 29 May, 2018;
originally announced May 2018.
-
Analytical Impedance Models for Very Short Bunches
Authors:
Igor Zagorodnov
Abstract:
We discuss several analytical models for impedances of very short bunches. The approximate analytical models are compared with direct solution of Maxwells equations.
We discuss several analytical models for impedances of very short bunches. The approximate analytical models are compared with direct solution of Maxwells equations.
△ Less
Submitted 19 March, 2018;
originally announced March 2018.
-
Beam Dynamics and Tolerance Studies of the THz-driven Electron Linac for the AXSIS Experiment
Authors:
K. Galaydych,
R. Assmann,
U. Dorda,
B. Marchetti,
G. Vashchenko,
I. Zagorodnov
Abstract:
A dielectric-loaded linac powered by THz-pulses is one of the key parts of the "Attosecond X-ray Science: Imaging and Spectroscopy" (AXSIS) project at DESY, Hamburg. As in conventional accelerators, the AXSIS linac is designed to have phase velocity equal to the speed of light which, in this case, is realized by tuning the thickness of the dielectric layer and the radius of the vacuum channel. The…
▽ More
A dielectric-loaded linac powered by THz-pulses is one of the key parts of the "Attosecond X-ray Science: Imaging and Spectroscopy" (AXSIS) project at DESY, Hamburg. As in conventional accelerators, the AXSIS linac is designed to have phase velocity equal to the speed of light which, in this case, is realized by tuning the thickness of the dielectric layer and the radius of the vacuum channel. Therefore, structure fabrication errors will lead to a change in the beam dynamics and beam quality. Additionally, errors in the bunch injection will also affect the acceleration process and can cause beam loss on the linac wall. This paper numerically investigates the process of electron beam acceleration in the AXSIS linac, taking into account the aforementioned errors. Particle tracking simulations were done using the code ECHO, which uses a low-dispersive algorithm for the field calculation and was specially adapted for the dielectric-loaded accelerating structures.
△ Less
Submitted 26 February, 2018;
originally announced February 2018.
-
Automatic tuning of Free Electron Lasers
Authors:
I. Agapov,
G. Geloni,
S. Tomin,
I. Zagorodnov
Abstract:
Existing FEL facilities often suffer from stability issues: so electron orbit, transverse electron optics, electron bunch compression and other parameters have to be readjusted often to account for drifts in performance of various components. The tuning procedures typically employed in operation are often manual and lengthy. We have been develo** a combination of model-free and model-based autom…
▽ More
Existing FEL facilities often suffer from stability issues: so electron orbit, transverse electron optics, electron bunch compression and other parameters have to be readjusted often to account for drifts in performance of various components. The tuning procedures typically employed in operation are often manual and lengthy. We have been develo** a combination of model-free and model-based automatic tuning methods to meet the needs of present and upcoming XFEL facilities. Our approach has been implemented at FLASH \cite{flash} to achieve automatic SASE tuning using empirical control of orbit, electron optics and bunch compression. In this paper we describe our approach to empirical tuning, the software which implements it, and the results of using it at FLASH. We also discuss the potential of using machine learning and model-based techniques in tuning methods.
△ Less
Submitted 7 April, 2017;
originally announced April 2017.
-
Wakefields of a Beam near a Single Plate in a Flat Dechirper
Authors:
Karl Bane,
Gennady Stupakov,
Igor Zagorodnov
Abstract:
We give formulas for the longitudinal, transverse, and quad point charge wakes for a short bunch of electrons passing by one plate of a flat dechirper.
We give formulas for the longitudinal, transverse, and quad point charge wakes for a short bunch of electrons passing by one plate of a flat dechirper.
△ Less
Submitted 28 November, 2016;
originally announced November 2016.
-
Corrugated structure insertion for extending the SASE bandwidth up to 3% at the European XFEL
Authors:
I. Zagorodnov,
G. Feng,
T. Limberg
Abstract:
The usage of x-ray free electron laser (XFEL) in femtosecond nanocrystallography involves sequential illumination of many small crystals of arbitrary orientation. Hence a wide radiation bandwidth will be useful in order to obtain and to index a larger number of Bragg peaks used for determination of the crystal orientation. Considering the baseline configuration of the European XFEL in Hamburg, and…
▽ More
The usage of x-ray free electron laser (XFEL) in femtosecond nanocrystallography involves sequential illumination of many small crystals of arbitrary orientation. Hence a wide radiation bandwidth will be useful in order to obtain and to index a larger number of Bragg peaks used for determination of the crystal orientation. Considering the baseline configuration of the European XFEL in Hamburg, and based on beam dynamics simulations, we demonstrate here that the usage of corrugated structures allows for a considerable increase in radiation bandwidth. Data collection with a 3% bandwidth, a few microjoule radiation pulse energy, a few femtosecond pulse duration, and a photon energy of 5.4 keV is possible. For this study we have developed an analytical modal representation of the short-range wake function of the flat corrugated structures for arbitrary offsets of the source and the witness particles.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.
-
Analytical Formulas for Short Bunch Wakes in a Flat Dechirper
Authors:
K. Bane,
G. Stupakov,
I. Zagorodnov
Abstract:
We develop analytical models of the longitudinal and transverse wakes, on and off axis for realistic structures, and then compare them with numerical calculations, and generally find good agreement. These analytical "first order" formulas approximate the droop at the origin of the longitudinal wake and of the slope of the transverse wakes; they represent an improvement in accuracy over earlier, "z…
▽ More
We develop analytical models of the longitudinal and transverse wakes, on and off axis for realistic structures, and then compare them with numerical calculations, and generally find good agreement. These analytical "first order" formulas approximate the droop at the origin of the longitudinal wake and of the slope of the transverse wakes; they represent an improvement in accuracy over earlier, "zeroth order" formulas. In example calculations for the RadiaBeam/LCLS dechirper using typical parameters, we find a 16\% droop in the energy chirp at the bunch tail compared to simpler calculations. With the beam moved to 200~$μ$m from one jaw in one dechiper section, one can achieve a 3~MV transverse kick differential over a 30~$μ$m length.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Calculation of wakefields in 2D rectangular structures
Authors:
I. Zagorodnov,
K. L. F Bane,
G. Stupakov
Abstract:
We consider the calculation of electromagnetic fields generated by an electron bunch passing through a vacuum chamber structure that, in general, consists of an entry pipe, followed by some kind of transition or cavity, and ending in an exit pipe. We limit our study to structures having rectangular cross-section, where the height can vary as function of longitudinal coordinate but the width and si…
▽ More
We consider the calculation of electromagnetic fields generated by an electron bunch passing through a vacuum chamber structure that, in general, consists of an entry pipe, followed by some kind of transition or cavity, and ending in an exit pipe. We limit our study to structures having rectangular cross-section, where the height can vary as function of longitudinal coordinate but the width and side walls remain fixed. For such structures, we derive a Fourier representation of the wake potentials through one-dimensional functions. A new numerical approach for calculating the wakes in such structures is proposed and implemented in the computer code ECHO(2D). The computation resource requirements for this approach are moderate and comparable to those for finding the wakes in 2D rotationally symmetric structures. Numerical examples obtained with the new numerical code are presented.
△ Less
Submitted 31 August, 2015; v1 submitted 31 July, 2015;
originally announced August 2015.
-
Perspectives of Imaging of Single Protein Molecules with the Present Design of the European XFEL. - Part I - X-ray Source, Beamlime Optics and Instrument Simulations
Authors:
Svitozar Serkez,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov,
Gianluca Geloni,
Oleksandr Yefanov
Abstract:
The Single Particles, Clusters and Biomolecules (SPB) instrument at the European XFEL is located behind the SASE1 undulator, and aims to support imaging and structure determination of biological specimen between about 0.1 micrometer and 1 micrometer size. The instrument is designed to work at photon energies from 3 keV up to 16 keV. This wide operation range is a cause for challenges to the focusi…
▽ More
The Single Particles, Clusters and Biomolecules (SPB) instrument at the European XFEL is located behind the SASE1 undulator, and aims to support imaging and structure determination of biological specimen between about 0.1 micrometer and 1 micrometer size. The instrument is designed to work at photon energies from 3 keV up to 16 keV. This wide operation range is a cause for challenges to the focusing optics. In particular, a long propagation distance of about 900 m between x-ray source and sample leads to a large lateral photon beam size at the optics. The beam divergence is the most important parameter for the optical system, and is largest for the lowest photon energies and for the shortest pulse duration (corresponding to the lowest charge). Due to the large divergence of nominal X-ray pulses with duration shorter than 10 fs, one suffers diffraction from mirror aperture, leading to a 100-fold decrease in fluence at photon energies around 4 keV, which are ideal for imaging of single biomolecules. The nominal SASE1 output power is about 50 GW. This is very far from the level required for single biomolecule imaging, even assuming perfect beamline and focusing efficiency. Here we demonstrate that the parameters of the accelerator complex and of the SASE1 undulator offer an opportunity to optimize the SPB beamline for single biomolecule imaging with minimal additional costs and time. Start to end simulations from the electron injector at the beginning of the accelerator complex up to the generation of diffraction data indicate that one can achieve diffraction without diffraction with about 0.5 photons per Shannon pixel at near-atomic resolution with 1e13 photons in a 4 fs pulse at 4 keV photon energy and in a 100 nm focus, corresponding to a fluence of 1e23 ph/cm^2. This result is exemplified using the RNA Pol II molecule as a case study.
△ Less
Submitted 31 July, 2014;
originally announced July 2014.
-
The Full Potential of the Baseline SASE Undulators of the European XFEL
Authors:
Ilya Agapov,
Gianluca Geloni,
Guangyao Feng,
Vitali Kocharyan,
Evgeni Saldin,
Svitozar Serkez,
Igor Zagorodnov
Abstract:
The output SASE characteristics of the baseline European XFEL, recently used in the TDRs of scientific instruments and X-ray optics, have been previously optimized assuming uniform undulators without considering the potential of undulator tapering in the SASE regime. Here we demonstrate that the performance of European XFEL sources can be significantly improved without additional hardware. The pro…
▽ More
The output SASE characteristics of the baseline European XFEL, recently used in the TDRs of scientific instruments and X-ray optics, have been previously optimized assuming uniform undulators without considering the potential of undulator tapering in the SASE regime. Here we demonstrate that the performance of European XFEL sources can be significantly improved without additional hardware. The procedure simply consists in the optimization of the undulator gap configuration for each X-ray beamline. Here we provide a comprehensive description of the soft X-ray photon beam properties as a function of wavelength and bunch charge. Based on nominal parameters for the electron beam, we demonstrate that undulator tapering allows one to achieve up to a tenfold increase in peak power and photon spectral density in the conventional SASE regime. We illustrate this fact for the SASE3 beamline. The FEL code Genesis has been extensively used for these studies. Based on these findings we suggest that the requirements for the SASE3 instrument (SCS, SQS) and for the SASE3 beam transport system be updated.
△ Less
Submitted 4 April, 2014;
originally announced April 2014.
-
Different Charges in the Same Bunch Train at the European XFEL
Authors:
Yauhen Kot,
Torsten Limberg,
Igor Zagorodnov
Abstract:
In this paper we have investigated the possibility of the operation of different charges in the bunch train for the nominal design of the XFEL injector and for the case that it is extended by an additional laser system on the cathode. We have examined the problem of similarity of beam optical functions for different bunch charges in a train. We report also about the sensitivity of the beam optical…
▽ More
In this paper we have investigated the possibility of the operation of different charges in the bunch train for the nominal design of the XFEL injector and for the case that it is extended by an additional laser system on the cathode. We have examined the problem of similarity of beam optical functions for different bunch charges in a train. We report also about the sensitivity of the beam optical functions on the chosen compression scenario and give an overview over the working points for the settings at the injector for single charge operation as well as combined working points for different bunch pairs.
△ Less
Submitted 21 November, 2013;
originally announced November 2013.
-
Nonlinear undulator tapering in conventional SASE regime at baseline electron beam parameters as a way to optimize the radiation characteristics of the European XFEL
Authors:
Svitozar Serkez,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov,
Gianluca Geloni
Abstract:
We demonstrate that the output radiation characteristics of the European XFEL sources at nominal operation point can be easily made significantly better than what is currently reported in the TDRs of scientific instruments and X-ray optics. In fact, the output SASE characteristics of the baseline European XFEL have been previously optimized assuming uniform undulators at a nominal operating point…
▽ More
We demonstrate that the output radiation characteristics of the European XFEL sources at nominal operation point can be easily made significantly better than what is currently reported in the TDRs of scientific instruments and X-ray optics. In fact, the output SASE characteristics of the baseline European XFEL have been previously optimized assuming uniform undulators at a nominal operating point of 5 kA peak current, without considering the potential of udulator tapering in the SASE regime. In order to illustrate this point, we analyze the case of an electron bunch with nominal parameters. Based on start-to-end simulations, we demonstrate that nonlinear undulator tapering allows one to achieve up to a tenfold increase in peak power and photon spectral density in the conventional SASE regime, without modification to the baseline design. The FEL code Genesis has been extensively used for these studies. In order to increase our confidence in simulation results, we cross-checked outcomes by reproducing simulations in the deep nonlinear SASE regime with tapered undulator using the code ALICE.
△ Less
Submitted 12 September, 2013;
originally announced September 2013.
-
Proposal to generate 10 TW level femtosecond x-ray pulses from a baseline undulator in conventional SASE regime at the European XFEL
Authors:
Svitozar Serkez,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov,
Gianluca Geloni
Abstract:
Output characteristics of the European XFEL have been previously studied assuming an operation point at 5 kA peak current. In this paper we explore the possibility to go well beyond such nominal peak current level. In order to illustrate the potential of the European XFEL accelerator complex we consider a bunch with 0.25 nC charge, compressed up to a peak current of 45 kA. An advantage of operatin…
▽ More
Output characteristics of the European XFEL have been previously studied assuming an operation point at 5 kA peak current. In this paper we explore the possibility to go well beyond such nominal peak current level. In order to illustrate the potential of the European XFEL accelerator complex we consider a bunch with 0.25 nC charge, compressed up to a peak current of 45 kA. An advantage of operating at such high peak current is the increase of the x-ray output peak power without any modification to the baseline design. Based on start-to-end simulations, we demonstrate that such high peak current, combined with undulator tapering, allows one to achieve up to a 100-fold increase in a peak power in the conventional SASE regime, compared to the nominal mode of operation. In particular, we find that 10 TW-power level, femtosecond x-ray pulses can be generated in the photon energy range between 3 keV and 5 keV, which is optimal for single biomolecule imaging. Our simulations are based on the exploitation of all the 21 cells foreseen for the SASE3 undulator beamline, and indicate that one can achieve diffraction to the desired resolution with 15 mJ (corresponding to about 3e13 photons) in pulses of about 3 fs, in the case of a 100 nm focus at the photon energy of 3.5 keV.
△ Less
Submitted 2 August, 2013;
originally announced August 2013.
-
Purified SASE undulator configuration to enhance the performance of the soft x-ray beamline at the European XFEL
Authors:
Svitozar Serkez,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov,
Gianluca Geloni
Abstract:
The purified SASE (pSASE) undulator configuration recently proposed at SLAC promises an increase in the output spectral density of XFELs. In this article we study a straightforward implementation of this configuration for the soft x-ray beamline at the European XFEL. A few undulator cells, resonant at a subharmonic of the FEL radiation, are used in the middle of the exponential regime to amplify t…
▽ More
The purified SASE (pSASE) undulator configuration recently proposed at SLAC promises an increase in the output spectral density of XFELs. In this article we study a straightforward implementation of this configuration for the soft x-ray beamline at the European XFEL. A few undulator cells, resonant at a subharmonic of the FEL radiation, are used in the middle of the exponential regime to amplify the radiation, while simultaneously reducing the FEL bandwidth. Based on start-to-end simulations, we show that with the proposed configuration the spectral density in the photon energy range between 1.3 keV and 3 keV can be enhanced of an order of magnitude compared to the baseline mode of operation. This option can be implemented into the tunable-gap SASE3 baseline undulator without additional hardware, and it is complementary to the self-seeding option with grating monochromator proposed for the same undulator line, which can cover the photon energy range between about 0.26 keV and 1 keV.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
-
Extension of SASE bandwidth up to 2% as a way to increase the efficiency of protein structure determination by x-ray nanocrystallography at the European XFEL
Authors:
Svitozar Serkez,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov,
Gianluca Geloni,
Oleksander Yefanov
Abstract:
Femtosecond x-ray nanocrystallography exploiting XFEL radiation is an emerging method for protein structure determination using crystals with sizes ranging from a few tens to a few hundreds nanometers. Crystals are randomly hit by XFEL pulses, producing diffraction patterns at unknown orientations. One can determine these orientations by studying the diffraction patterns themselves, i.e. by indexi…
▽ More
Femtosecond x-ray nanocrystallography exploiting XFEL radiation is an emerging method for protein structure determination using crystals with sizes ranging from a few tens to a few hundreds nanometers. Crystals are randomly hit by XFEL pulses, producing diffraction patterns at unknown orientations. One can determine these orientations by studying the diffraction patterns themselves, i.e. by indexing the Bragg peaks. The number of indexed individual images and the SASE bandwidth are inherently linked, because increasing the number of Bragg peaks per individual image requires increasing the bandwidth of the spectrum. This calls for a few percent SASE bandwidth, resulting in an increase in the number of indexed images at the same number of hits. Based on start-to-end simulations for the baseline of the European XFEL, we demonstrate here that it is possible to achieve up to a tenfold increase in SASE bandwidth, compared with the nominal mode of operation. This provides a route for further increasing the efficiency of protein structure determination at the European XFEL. We illustrate this concept with simulations of lysozyme nanocrystals.
△ Less
Submitted 20 June, 2013;
originally announced June 2013.
-
Proposal for a scheme to generate 10 TW-level femtosecond x-ray pulses for imaging single protein molecules at the European XFEL
Authors:
Svitozar Serkez,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov,
Gianluca Geloni,
Oleksander Yefanov
Abstract:
Single biomolecular imaging using XFEL radiation is an emerging method for protein structure determination using the "diffraction before destruction" method at near atomic resolution. Crucial parameters for such bio-imaging experiments are photon energy range, peak power, pulse duration, and transverse coherence. The largest diffraction signals are achieved at the longest wavelength that supports…
▽ More
Single biomolecular imaging using XFEL radiation is an emerging method for protein structure determination using the "diffraction before destruction" method at near atomic resolution. Crucial parameters for such bio-imaging experiments are photon energy range, peak power, pulse duration, and transverse coherence. The largest diffraction signals are achieved at the longest wavelength that supports a given resolution, which should be better than 0.3 nm. We propose a configuration which combines self-seeding and undulator tapering techniques with the emittance-spoiler method in order to increase the XFEL output peak power and to shorten the pulse duration up to a level sufficient for performing bio-imaging of single protein molecules at the optimal photon energy range, i.e. around 4 keV. Experiments at the LCLS confirmed the feasibility of these three new techniques. Based on start-to-end simulations we demonstrate that self-seeding, combined with undulator tapering, allows one to achieve up to a 100-fold increase in peak-power. A slotted foil in the last bunch compressor is added for x-ray pulse duration control. Simulations indicate that one can achieve diffraction to the desired resolution with 50 mJ (corresponding to 1e14 photons) per 10 fs pulse at 3.5 keV photon energy in a 100 nm focus. This result is exemplified using the photosystem I membrane protein as a case study.
△ Less
Submitted 4 June, 2013;
originally announced June 2013.
-
Scheme for generating and transporting THz radiation to the X-ray experimental hall at the European XFEL
Authors:
Winfried Decking,
Gianluca Geloni,
Vitali Kocharyan,
Evgeni Saldin,
Igor Zagorodnov
Abstract:
The design of a THz edge radiation source for the European XFEL is presented. We consider generation of THz radiation from the spent electron beam downstream of the SASE2 undulator in the electron beam dump area. In this way, the THz output must propagate at least for 250 meters through the photon beam tunnel to the experimental hall to reach the SASE2 X-ray hutches. We propose to use an open beam…
▽ More
The design of a THz edge radiation source for the European XFEL is presented. We consider generation of THz radiation from the spent electron beam downstream of the SASE2 undulator in the electron beam dump area. In this way, the THz output must propagate at least for 250 meters through the photon beam tunnel to the experimental hall to reach the SASE2 X-ray hutches. We propose to use an open beam waveguide such as an iris guide as transmission line. In order to efficiently couple radiation into the iris transmission line, generation of the THz radiation pulse can be performed directly within the iris guide. The line transporting the THz radiation to the SASE2 X-ray hutches introduces a path delay of about 20 m. Since THz pump/X-ray probe experiments should be enabled, we propose to exploit the European XFEL baseline multi-bunch mode of operation, with 222 ns electron bunch separation, in order to cope with the delay between THz and X-ray pulses. We present start-to-end simulations for 1 nC bunch operation-parameters, optimized for THz pump/X-ray probe experiments. Detailed characterization of the THz and SASE X-ray radiation pulses is performed. Highly focused THz beams will approach the high field limit of 1 V/atomic size.
△ Less
Submitted 15 December, 2011;
originally announced December 2011.
-
A Semi-Analytical Modelling of Multistage Bunch Compression with Collective Effects
Authors:
Igor Zagorodnov,
Martin Dohlus
Abstract:
In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given.
In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given.
△ Less
Submitted 6 July, 2010;
originally announced July 2010.
-
High Frequency Impedances in European XFEL
Authors:
Martin Dohlus,
Igor Zagorodnov,
Olga Zagorodnova
Abstract:
The method of the optical approximation is used to estimate the high frequency impedances of different vacuum chamber transitions of the European XFEL beam line. The approximations of the longitudinal impedances are obtained in terms of simple one-dimensional integrals. The transverse impedances are written in analytical closed form. The analytical results are compared with the results obtained by…
▽ More
The method of the optical approximation is used to estimate the high frequency impedances of different vacuum chamber transitions of the European XFEL beam line. The approximations of the longitudinal impedances are obtained in terms of simple one-dimensional integrals. The transverse impedances are written in analytical closed form. The analytical results are compared with the results obtained by numerical solution of Maxwell's equations.
△ Less
Submitted 4 June, 2010;
originally announced June 2010.
-
Explicit TE/TM Scheme for Particle Beam Simulations
Authors:
M. Dohlus,
I. Zagorodnov
Abstract:
In this paper we propose an explicit two-level conservative scheme based on a TE/TM like splitting of the field components in time. Its dispersion properties are adjusted to accelerator problems. It is simpler and faster than the implicit version [1]. It does not have dispersion in the longitudinal direction and the dispersion properties in the transversal plane are improved. The explicit charac…
▽ More
In this paper we propose an explicit two-level conservative scheme based on a TE/TM like splitting of the field components in time. Its dispersion properties are adjusted to accelerator problems. It is simpler and faster than the implicit version [1]. It does not have dispersion in the longitudinal direction and the dispersion properties in the transversal plane are improved. The explicit character of the new scheme allows a uniformly stable conformal method without iterations and the scheme can be parallelized easily. It assures energy and charge conservation. A version of this explicit scheme for rotationally symmetric structures is free from the progressive time step reducing for higher order azimuthal modes as it takes place for Yee's explicit method used in the most popular electrodynamics codes.
△ Less
Submitted 8 January, 2009;
originally announced January 2009.
-
Impedance Calculations of Non-Axisymmetric Transitions Using the Optical Approximation
Authors:
K. L. F. Bane,
G. Stupakov,
I. Zagorodnov
Abstract:
In a companion report, we have derived a method for finding the impedance at high frequencies of vacuum chamber transitions that are short compared to the catch-up distance, in a frequency regime that (in analogy to geometric optics for light) we call the optical regime. In this report we apply the method to various non-axisymmetric geometries such as irises/short collimators in a beam pipe, ste…
▽ More
In a companion report, we have derived a method for finding the impedance at high frequencies of vacuum chamber transitions that are short compared to the catch-up distance, in a frequency regime that (in analogy to geometric optics for light) we call the optical regime. In this report we apply the method to various non-axisymmetric geometries such as irises/short collimators in a beam pipe, step-in transitions, step-out transitions, and more complicated transitions of practical importance. Most of our results are analytical, with a few given in terms of a simple one dimensional integral. Our results are compared to wakefield simulations with the time-domain, finite-difference program ECHO, and excellent agreement is found.
△ Less
Submitted 19 March, 2007;
originally announced March 2007.
-
Optical approximation in the theory of geometric impedance
Authors:
G. Stupakov,
K. L. F. Bane,
I. Zagorodnov
Abstract:
In this paper we introduce an optical approximation into the theory of impedance calculation, one valid in the limit of high frequencies. This approximation neglects diffraction effects in the radiation process, and is conceptually equivalent to the approximation of geometric optics in electromagnetic theory. Using this approximation, we derive equations for the longitudinal impedance for arbitr…
▽ More
In this paper we introduce an optical approximation into the theory of impedance calculation, one valid in the limit of high frequencies. This approximation neglects diffraction effects in the radiation process, and is conceptually equivalent to the approximation of geometric optics in electromagnetic theory. Using this approximation, we derive equations for the longitudinal impedance for arbitrary offsets, with respect to a reference orbit, of source and test particles. With the help of the Panofsky-Wenzel theorem we also obtain expressions for the transverse impedance (also for arbitrary offsets). We further simplify these expressions for the case of the small offsets that are typical for practical applications. Our final expressions for the impedance, in the general case, involve two dimensional integrals over various cross-sections of the transition. We further demonstrate, for several known axisymmetric examples, how our method is applied to the calculation of impedances. Finally, we discuss the accuracy of the optical approximation and its relation to the diffraction regime in the theory of impedance.
△ Less
Submitted 16 March, 2007;
originally announced March 2007.
-
Indirect methods for wake potential integration
Authors:
Igor Zagorodnov
Abstract:
The development of the modern accelerator and free-electron laser projects requires to consider wake fields of very short bunches in arbitrary three dimensional structures. To obtain the wake numerically by direct integration is difficult, since it takes a long time for the scattered fields to catch up to the bunch. On the other hand no general algorithm for indirect wake field integration is av…
▽ More
The development of the modern accelerator and free-electron laser projects requires to consider wake fields of very short bunches in arbitrary three dimensional structures. To obtain the wake numerically by direct integration is difficult, since it takes a long time for the scattered fields to catch up to the bunch. On the other hand no general algorithm for indirect wake field integration is available in the literature so far. In this paper we review the known indirect methods to compute wake potentials in rotationally symmetric and cavity-like three dimensional structures. For arbitrary three dimensional geometries we introduce several new techniques and test them numerically.
△ Less
Submitted 6 June, 2006;
originally announced June 2006.
-
A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components
Authors:
M. Woods,
R. Erickson,
J. Frisch,
C. Hast,
R. K. Jobe,
L. Keller,
T. Markiewicz,
T. Maruyama,
D. McCormick,
J. Nelson,
T. Nelson,
N. Phinney,
T. Raubenheimer,
M. Ross,
A. Seryi,
S. Smith,
Z. Szalata,
P. Tenenbaum,
M. Woodley,
D. Angal-Kalinin,
C. Beard,
C. Densham,
J. Greenhalgh,
F. Jackson,
A. Kalinin
, et al. (36 additional authors not shown)
Abstract:
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out expe…
▽ More
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.
△ Less
Submitted 24 May, 2005;
originally announced May 2005.
