Showing 1–6 of 6 results for author: Yoshiki, W

Brillouin lasing in coupled silica toroid microcavities

Authors: Yoshihiro Honda, Wataru Yoshiki, Tomohiro Tetsumoto, Shun Fujii, Kentaro Furusawa, Norihiko Sekine, Takasumi Tanabe

Abstract: We demonstrate stimulated Brillouin scattering (SBS) lasing in a strongly coupled microcavity system. By coupling two silica toroid microcavities, we achieve large mode splitting of 11 GHz, whose frequency separation matches the Brillouin frequency shift of silica. The SBS light is resonantly amplified by pum** at the higher frequency side of the supermode splitting resonance. Since the mode spl… ▽ More We demonstrate stimulated Brillouin scattering (SBS) lasing in a strongly coupled microcavity system. By coupling two silica toroid microcavities, we achieve large mode splitting of 11 GHz, whose frequency separation matches the Brillouin frequency shift of silica. The SBS light is resonantly amplified by pum** at the higher frequency side of the supermode splitting resonance. Since the mode splitting is adjusted by changing the gap distance between the two cavities, our system does not require precise control of a mm-sized cavity diameter to match the free-spectral spacing with the Brillouin frequency shift. It also allows us to use a small cavity, hence our system has the potential to achieve the lasing threshold at a very low power. △ Less

Submitted 24 December, 2017; originally announced December 2017.

The effect on Kerr comb generation in a clockwise and counter-clockwise mode coupled microcavity

Authors: Shun Fujii, Atsuhiro Hori, Takumi Kato, Ryo Suzuki, Yusuke Okabe, Wataru Yoshiki, Akitoshi Chen-**nai, Takasumi Tanabe

Abstract: We study the impact of inherent mode coupling between clockwise (CW) and counter-clockwise (CCW) modes on Kerr comb generation in a small whispering-gallery mode microcavity. Our numerical analysis using a coupled Lugiato-Lefever equation reveals the range of the coupling strength in which a soliton pulse can be obtained in the CW direction. It also showed that CCW comb power depends on the coupli… ▽ More We study the impact of inherent mode coupling between clockwise (CW) and counter-clockwise (CCW) modes on Kerr comb generation in a small whispering-gallery mode microcavity. Our numerical analysis using a coupled Lugiato-Lefever equation reveals the range of the coupling strength in which a soliton pulse can be obtained in the CW direction. It also showed that CCW comb power depends on the coupling strength between the CW and CCW modes. In addition to the simulation, we conducted an experiment to confirm that the power ratio between the CW and CCW comb modes depends on the coupling strength, and the experimental results agree well with the simulation results. This study helps us to understand the relationship between CW and CCW mode coupling and Kerr comb generation, and the effect on soliton formation. △ Less

Submitted 28 September, 2017; originally announced September 2017.

Comments: 8 pages, 8 Figures

Journal ref: Opt. Express 25 (2017) 28969-28982

All-optical switching using Kerr effect in a silica toroid microcavity

Authors: Wataru Yoshiki, Takasumi Tanabe

Abstract: We demonstrate experimentally an all-optical switching operation using the Kerr effect in a silica toroid microcavity. Thanks to the small mode volume and high quality factor of the silica toroid microcavity, we achieved on-chip optical Kerr switching with an input power of 2 mW. This value is the smallest among all previously reported on-chip optical Kerr switches. We also show that this value ca… ▽ More We demonstrate experimentally an all-optical switching operation using the Kerr effect in a silica toroid microcavity. Thanks to the small mode volume and high quality factor of the silica toroid microcavity, we achieved on-chip optical Kerr switching with an input power of 2 mW. This value is the smallest among all previously reported on-chip optical Kerr switches. We also show that this value can be reduced to a few tens of uW by employing a mode with a Q factor of >2x10^7. △ Less

Submitted 10 July, 2014; originally announced July 2014.

Comments: 9 pages, 5 figures

Add-drop system for Kerr bistable memory in silicon nitride microrings

Authors: Wataru Yoshiki, Takasumi Tanabe

Abstract: We numerically studied the required conditions for achieving a memory operation based on Kerr bistability in the presence of the thermo-optic effect in silicon nitride microring cavity systems. By comparing a side-coupled system and an add-drop system, we found that the latter is needed to realize obtain Kerr bistable operation. In addition, we show the coupling coefficient range in which the memo… ▽ More We numerically studied the required conditions for achieving a memory operation based on Kerr bistability in the presence of the thermo-optic effect in silicon nitride microring cavity systems. By comparing a side-coupled system and an add-drop system, we found that the latter is needed to realize obtain Kerr bistable operation. In addition, we show the coupling coefficient range in which the memory operation does not suffer from the thermo-optic effect. △ Less

Submitted 27 August, 2013; originally announced August 2013.

Comments: 4 pages,4 figures

Rigorous analysis of bistable memory in silica toroid microcavity

Authors: Wataru Yoshiki, Takasumi Tanabe

Abstract: We model the nonlinear response of a silica toroid microcavity using coupled mode theory and a finite element method, and successfully obtain Kerr bistable operation that does not suffer from thermo-optic effect by optimizing the fiber-cavity coupling. Our analysis shows it is possible to demonstrate a Kerr bistable memory with a memory holding time of 500 ns at an extremely low energy consumption… ▽ More We model the nonlinear response of a silica toroid microcavity using coupled mode theory and a finite element method, and successfully obtain Kerr bistable operation that does not suffer from thermo-optic effect by optimizing the fiber-cavity coupling. Our analysis shows it is possible to demonstrate a Kerr bistable memory with a memory holding time of 500 ns at an extremely low energy consumption. △ Less

Submitted 6 August, 2012; originally announced August 2012.

Polygonal silica toroidal microcavity for controlled optical coupling

Authors: Takumi Kato, Wataru Yoshiki, Takasumi Tanabe

Abstract: We fabricated polygonal silica toroidal microcavities to achieve stable mechanical coupling with an evanescent coupler such as a tapered fiber. The polygonal cavity was fabricated by using a combination of isotropic etching, anisotropic etching and laser reflow. It offers both high and low coupling efficiencies with the cavity mode even when the coupler is in contact with the cavity, which offers… ▽ More We fabricated polygonal silica toroidal microcavities to achieve stable mechanical coupling with an evanescent coupler such as a tapered fiber. The polygonal cavity was fabricated by using a combination of isotropic etching, anisotropic etching and laser reflow. It offers both high and low coupling efficiencies with the cavity mode even when the coupler is in contact with the cavity, which offers the possibility of taking the device outside the laboratory. A numerical simulation showed that an octagonal silica toroidal microcavity had an optical quality factor of 8.8\times10^6. △ Less

Submitted 25 July, 2012; originally announced July 2012.

Comments: 13 pages, 4 figures