Showing 1–31 of 31 results for author: Yildiz, H

ELMO2EDS: Transforming Educational Credentials into Self-Sovereign Identity Paradigm

Authors: Patrick Herbke, Hakan Yildiz

Abstract: Digital credentials in education make it easier for students to apply for a course of study, a new job, or change a higher education institute. Academic networks, such as EMREX, support the exchange of digital credentials between students and education institutes. Students can fetch results from one educational institute and apply for a course of study at another educational institute. Digital sig… ▽ More Digital credentials in education make it easier for students to apply for a course of study, a new job, or change a higher education institute. Academic networks, such as EMREX, support the exchange of digital credentials between students and education institutes. Students can fetch results from one educational institute and apply for a course of study at another educational institute. Digital signatures of the issuing institution can verify the authenticity of digital credentials. Each institution must provide the integration of EMREX using its identity management system. In this paper, we investigate how digital credentials can be integrated into the Self-Sovereign Identity ecosystem to overcome the known issues of academic networks. We examine known issues such as the authentication of students. Self-Sovereign Identity is a paradigm that gives individuals control of their digital identities. Based on our findings, we propose ELMO2EDS, a solution that 1) converts digital credentials from EMREX to a suitable Self-Sovereign Identy data format, 2) enables authenticating a student, and 3) enables issuing, storing, and verification of achieved study. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: Published at the 20th International Conference on Information Technology Based Higher Education and Training (ITHET) Antalya, Turkey

Orders of Magnitude Improved Cyclotron-Mode Cooling for Non-Destructive Spin Quantum Transition Spectroscopy with Single Trapped Antiprotons

Authors: B. M. Latacz, M. Fleck, J. I. Jaeger, G. Umbrazunas, B. P. Arndt, S. R. Erlewein, E. J. Wursten, J. A. Devlin, P. Micke, F. Abbass, D. Schweitzer, M. Wiesinger, C. Will, H. Yildiz, K. Blaum, Y. Matsuda, A. Mooser, C. Ospelkaus, A. Soter, W. Quint, J. Walz, Y. Yamazaki, C. Smorra, S. Ulmer

Abstract: We demonstrate efficient sub-thermal cooling of the modified cyclotron mode of a single trapped antiproton and reach particle temperatures $T_+=E_+/k_\text{B}$ below $200\,$mK in preparation times shorter than $500\,$s. This corresponds to the fastest resistive single-particle cyclotron cooling to sub-thermal temperatures ever demonstrated. By cooling trapped particles to such low energies, we dem… ▽ More We demonstrate efficient sub-thermal cooling of the modified cyclotron mode of a single trapped antiproton and reach particle temperatures $T_+=E_+/k_\text{B}$ below $200\,$mK in preparation times shorter than $500\,$s. This corresponds to the fastest resistive single-particle cyclotron cooling to sub-thermal temperatures ever demonstrated. By cooling trapped particles to such low energies, we demonstrate the detection of antiproton spin transitions with an error-rate $<0.000025$, more than three orders of magnitude better than in previous best experiments. This method will have enormous impact on multi-Penning-trap experiments that measure magnetic moments with single nuclear spins for tests of matter/antimatter symmetry, high-precision mass-spectrometry, and measurements of electron $g$-factors bound to highly-charged ions that test quantum electrodynamics. △ Less

Submitted 11 April, 2024; originally announced April 2024.

Image-current mediated sympathetic laser cooling of a single proton in a Penning trap down to 170 mK axial temperature

Authors: C. Will, M. Wiesinger, P. Micke, H. Yildiz, T. Driscoll, S. Kommu, F. Abbass, B. P. Arndt, B. B. Bauer, S. Erlewein, M. Fleck, J. I. Jäger, B. M. Latacz, A. Mooser, D. Schweitzer, G. Umbrazunas, E. Wursten, K. Blaum, J. A. Devlin, C. Ospelkaus, W. Quint, A. Soter, J. Walz, C. Smorra, S. Ulmer

Abstract: We demonstrate a new temperature record for image-current mediated sympathetic cooling of a single proton in a cryogenic Penning trap by laser-cooled $^9$Be$^+$. An axial mode temperature of 170 mK is reached, which is a 15-fold improvement compared to the previous best value. Our cooling technique is applicable to any charged particle, so that the measurements presented here constitute a mileston… ▽ More We demonstrate a new temperature record for image-current mediated sympathetic cooling of a single proton in a cryogenic Penning trap by laser-cooled $^9$Be$^+$. An axial mode temperature of 170 mK is reached, which is a 15-fold improvement compared to the previous best value. Our cooling technique is applicable to any charged particle, so that the measurements presented here constitute a milestone towards the next generation of high-precision Penning-trap measurements with exotic particles. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Comments: 7 pages, 4 figures

Metal-Optic Nanophotonic Modulators in Standard CMOS Technology

Authors: Mohamed ElKabbash, Sivan Trajtenberg-Mills, Isaac Harris, Saumil Bandyopadhyay, Mohamed I Ibrahim, Archer Wang, Xibi Chen, Cole Brabec, Hasan Z. Yildiz, Ruonan Han, Dirk Englund

Abstract: Integrating nanophotonics with electronics promises revolutionary applications, from LiDAR to holographic displays. Although silicon photonics is maturing, realizing active nanophotonics in the ubiquitous bulk CMOS processes remains challenging. We introduce a fabless approach to embed active nanophotonics in bulk CMOS by co-designing the back-end-of-line metal layers for optical functionality. Us… ▽ More Integrating nanophotonics with electronics promises revolutionary applications, from LiDAR to holographic displays. Although silicon photonics is maturing, realizing active nanophotonics in the ubiquitous bulk CMOS processes remains challenging. We introduce a fabless approach to embed active nanophotonics in bulk CMOS by co-designing the back-end-of-line metal layers for optical functionality. Using a 65nm CMOS process, we create plasmonic liquid crystal modulators with switching speeds 100x faster than commercial technologies. This zero-change nanophotonics method could equip mass-produced chips with optical communications, sensing and imaging. Embedding nanophotonics in the dominant electronics platform democratizes nanofabrication, spawning technologies from chip-scale LiDAR to holographic light-field displays. △ Less

Submitted 16 November, 2023; v1 submitted 6 October, 2023; originally announced October 2023.

Ultra thin polymer foil cryogenic window for antiproton deceleration and storage

Authors: B. M. Latacz, B. P. Arndt, J. A. Devlin, S. R. Erlewein, M. Fleck, J. I. Jäger, P. Micke, G. Umbrazunas, E. Wursten, F. Abbass, D. Schweitzer, M. Wiesinger, C. Will, H. Yildiz, K. Blaum, Y. Matsuda, A. Mooser, C. Ospelkaus, C. Smorra, A. Sótér, W. Quint, J. Walz, Y. Yamazaki, S. Ulmer

Abstract: We present the design and characterisation of a cryogenic window based on an ultra-thin aluminised PET foil at T < 10K, which can withstand a pressure difference larger than 1bar at a leak rate < $1\times 10^{-9}$ mbar$\cdot$ l/s. Its thickness of approximately 1.7 $μ$m makes it transparent to various types of particles over a broad energy range. To optimise the transfer of 100keV antiprotons thro… ▽ More We present the design and characterisation of a cryogenic window based on an ultra-thin aluminised PET foil at T < 10K, which can withstand a pressure difference larger than 1bar at a leak rate < $1\times 10^{-9}$ mbar$\cdot$ l/s. Its thickness of approximately 1.7 $μ$m makes it transparent to various types of particles over a broad energy range. To optimise the transfer of 100keV antiprotons through the window, we tested the degrading properties of different aluminium coated PET foils of thicknesses between 900nm and 2160nm, concluding that 1760nm foil decelerates antiprotons to an average energy of 5 keV. We have also explicitly studied the permeation as a function of coating thickness and temperature, and have performed extensive thermal and mechanical endurance and stress tests. Our final design integrated into the experiment has an effective open surface consisting of 7 holes with 1 mm diameter and will transmit up to 2.5% of the injected 100keV antiproton beam delivered by the AD/ELENA-facility of CERN. △ Less

Submitted 24 August, 2023; originally announced August 2023.

Trap-integrated fluorescence detection based on silicon photomultipliers in a cryogenic Penning trap

Authors: Markus Wiesinger, Florian Stuhlmann, Matthew A. Bohman, Peter Micke, Christian Will, Hüseyin Yildiz, Fatma Abbass, Bela P. Arndt, Jack A. Devlin, Stefan Erlewein, Markus Fleck, Julia I. Jäger, Barbara M. Latacz, Daniel Schweitzer, Gilbertas Umbrazunas, Elise Wursten, Klaus Blaum, Yasuyuki Matsuda, Andreas Mooser, Wolfgang Quint, Anna Soter, Jochen Walz, Christian Smorra, Stefan Ulmer

Abstract: We present a fluorescence-detection system for laser-cooled 9Be+ ions based on silicon photomultipliers (SiPM) operated at 4 K and integrated into our cryogenic 1.9 T multi-Penning-trap system. Our approach enables fluorescence detection in a hermetically-sealed cryogenic Penning-trap chamber with limited optical access, where state-of-the-art detection using a telescope and photomultipliers at ro… ▽ More We present a fluorescence-detection system for laser-cooled 9Be+ ions based on silicon photomultipliers (SiPM) operated at 4 K and integrated into our cryogenic 1.9 T multi-Penning-trap system. Our approach enables fluorescence detection in a hermetically-sealed cryogenic Penning-trap chamber with limited optical access, where state-of-the-art detection using a telescope and photomultipliers at room temperature would be extremely difficult. We characterize the properties of the SiPM in a cryocooler at 4 K, where we measure a dark count rate below 1/s and a detection efficiency of 2.5(3) %. We further discuss the design of our cryogenic fluorescence-detection trap, and analyze the performance of our detection system by fluorescence spectroscopy of 9Be+ ion clouds during several runs of our experiment. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Comments: 12 pages, 11 figures

The incompleteness of the experimental searches for vector-like leptons at CERN

Authors: Feyza Baspehlivan, Burak Dagli, Hatice Duran Yildiz, Saleh Sultansoy

Abstract: There are strong phenomenological arguments favoring the existence of vector-like leptons and quarks in nature. In spite of extensive studies conducted in search of vector-like quarks, there are only a limited number of experimental studies on vector-like leptons. Moreover, these searches do not include all possible decay modes of vector-like leptons. Therefore, the analyses done so far are incomp… ▽ More There are strong phenomenological arguments favoring the existence of vector-like leptons and quarks in nature. In spite of extensive studies conducted in search of vector-like quarks, there are only a limited number of experimental studies on vector-like leptons. Moreover, these searches do not include all possible decay modes of vector-like leptons. Therefore, the analyses done so far are incomplete. In this letter, we highlight decay channels that are not covered by different experimental analyses, with a focus on L3, ATLAS, and CMS results. We argue that experimental analyses should be redone considering these shortcomings. △ Less

Submitted 7 November, 2023; v1 submitted 27 June, 2023; originally announced August 2023.

Comments: 11 pages, 5 figures, 3 tables

BASE-STEP: A transportable antiproton reservoir for fundamental interaction studies

Authors: C. Smorra, F. Abbass, M. Bohman, Y. Dutheil, A. Hobl, D. Popper, B. Arndt, B. B. Bauer, J. A. Devlin, S. Erlewein, M. Fleck, J. I. Jäger, B. M. Latacz, P. Micke, M. Schiffelholz, G. Umbrazunas, M. Wiesinger, C. Will, E. Wursten, H. Yildiz, K. Blaum, Y. Matsuda, A. Mooser, C. Ospelkaus, W. Quint , et al. (4 additional authors not shown)

Abstract: Currently, the only worldwide source of low-energy antiprotons is the AD/ELENA facility located at CERN. To date, all precision measurements on single antiprotons have been conducted at this facility and provide stringent tests of the fundamental interactions and their symmetries. However, the magnetic field fluctuations from the facility operation limit the precision of upcoming measurements. To… ▽ More Currently, the only worldwide source of low-energy antiprotons is the AD/ELENA facility located at CERN. To date, all precision measurements on single antiprotons have been conducted at this facility and provide stringent tests of the fundamental interactions and their symmetries. However, the magnetic field fluctuations from the facility operation limit the precision of upcoming measurements. To overcome this limitation, we have designed the transportable antiproton trap system BASE-STEP to relocate antiprotons to laboratories with a calm magnetic environment. We anticipate that the transportable antiproton trap will facilitate enhanced tests of CPT invariance with antiprotons, and provide new experimental possibilities of using transported antiprotons and other accelerator-produced exotic ions. We present here the technical design of the transportable trap system. This includes the transportable superconducting magnet, the cryogenic inlay consisting of the trap stack and the detection systems, and the differential pum** section to suppress the residual gas flow into the cryogenic trap chamber. △ Less

Submitted 19 April, 2023; originally announced April 2023.

Comments: To be submitted to Rev. Sci. Instruments

Journal ref: Review of Scientific Instruments 94, 113201 (2023)

Testing CPT Invariance by High-Precision Comparisons of Fundamental Properties of Protons and Antiprotons at BASE

Authors: E. J. Wursten, M. J. Borchert, J. A. Devlin, S. R. Erlewein, M. Fleck, J. A. Harrington, J. I. Jäger, B. M. Latacz, P. Micke, G. Umbrazunas, F. Abbass, M. Bohman, S. Kommu, D. Popper, M. Wiesinger, C. Will, H. Yildiz, K. Blaum, Y. Matsuda, A. Mooser, C. Ospelkaus, A. Soter, W. Quint, J. Walz, Y. Yamazaki , et al. (2 additional authors not shown)

Abstract: The BASE collaboration at the Antiproton Decelerator facility of CERN compares the fundamental properties of protons and antiprotons using advanced Penning-trap systems. In previous measurement campaigns, we measured the magnetic moments of the proton and the antiproton, reaching (sub-)parts-in-a-billion fractional uncertainty. In the latest campaign, we have compared the proton and antiproton cha… ▽ More The BASE collaboration at the Antiproton Decelerator facility of CERN compares the fundamental properties of protons and antiprotons using advanced Penning-trap systems. In previous measurement campaigns, we measured the magnetic moments of the proton and the antiproton, reaching (sub-)parts-in-a-billion fractional uncertainty. In the latest campaign, we have compared the proton and antiproton charge-to-mass ratios with a fractional uncertainty of 16 parts in a trillion. In this contribution, we give an overview of the measurement campaign, and detail how its results are used to constrain nine spin-independent coefficients of the Standard-Model Extension in the proton and electron sector. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Comments: Presented at the Ninth Meeting on CPT and Lorentz Symmetry, Bloomington, Indiana, May 17-26, 2022

A Tutorial on the Interoperability of Self-sovereign Identities

Authors: Hakan Yildiz, Axel Küpper, Dirk Thatmann, Sebastian Göndör, Patrick Herbke

Abstract: Self-sovereign identity is the latest digital identity paradigm that allows users, organizations, and things to manage identity in a decentralized fashion without any central authority controlling the process of issuing identities and verifying assertions. Following this paradigm, implementations have emerged in recent years, with some having different underlying technologies. These technological… ▽ More Self-sovereign identity is the latest digital identity paradigm that allows users, organizations, and things to manage identity in a decentralized fashion without any central authority controlling the process of issuing identities and verifying assertions. Following this paradigm, implementations have emerged in recent years, with some having different underlying technologies. These technological differences often create interoperability problems between software that interact with each other from different implementations. Although a common problem, there is no common understanding of self-sovereign identity interoperability. In the context of this tutorial, we create a definition of interoperability of self-sovereign identities to enable a common understanding. Moreover, due to the decentralized nature, interoperability of self-sovereign identities depends on multiple components, such as ones responsible for establishing trust or enabling secure communication between entities without centralized authorities. To understand those components and their dependencies, we also present a reference model that maps the required components and considerations that build up a self-sovereign identity implementation. The reference model helps address the question of how to achieve interoperability between different implementations. △ Less

Submitted 8 August, 2022; originally announced August 2022.

Comments: Submitted to IEEE Communications Surveys & Tutorials

Blade: A Blockchain-supported Architecture for Decentralized Services

Authors: Sebastian Göndör, Hakan Yildiz, Martin Westerkamp, Axel Küpper

Abstract: Decentralized services and applications provide a multitude of advantages for their users, such as improved privacy, control, and independence from third parties. Anyhow, decentralization comes at the cost of certain disadvantages, such as increased application complexity or communication overhead. This aggravates the development and deployment of decentralized services and applications. In this p… ▽ More Decentralized services and applications provide a multitude of advantages for their users, such as improved privacy, control, and independence from third parties. Anyhow, decentralization comes at the cost of certain disadvantages, such as increased application complexity or communication overhead. This aggravates the development and deployment of decentralized services and applications. In this paper we present Blade, a software platform that aims to ease the effort of development, deployment, and administration of decentralized services by implementing reusable solutions for recurring challenges developers are facing when designing decentralized service architectures. This includes functionality for e.g. identity management, access control, request handling, verification of authenticity and integrity, discovery, or routing. Blade implements all this functionality in a Blade server instance, which can be deployed on a lightweight device, such as a NAS, Raspberry Pi, or router at home. This allows users without expert knowledge to run a Blade instance with already existing hardware with little overhead. Blade supports polyglot Blade modules that implement extended functionality, such as interfaces, frontends, and business logic of decentralized applications, e.g. a decentralized instant messaging service or an online social network. Based on the Oracle GraalVM, Blade modules can be implemented in a variety of programming languages and utilize the functionality provided by the Blade server instance. Blade modules are published in a Ethereum-based decentralized marketplace from where they can be installed directly via the Blade instances... △ Less

Submitted 29 July, 2022; originally announced July 2022.

Comments: 12 pages

Towards Decentralized Identity Management in Multi-stakeholder 6G Networks

Authors: Sandro Rodriguez Garzon, Hakan Yildiz, Axel Küpper

Abstract: Trust-building mechanisms among network entities of different administrative domains will gain significant importance in 6G because a future mobile network will be operated cooperatively by a variety of different stakeholders rather than by a single mobile network operator. The use of trusted third party issued certificates for initial trust establishment in multi-stakeholder 6G networks is only a… ▽ More Trust-building mechanisms among network entities of different administrative domains will gain significant importance in 6G because a future mobile network will be operated cooperatively by a variety of different stakeholders rather than by a single mobile network operator. The use of trusted third party issued certificates for initial trust establishment in multi-stakeholder 6G networks is only advisable to a limited extent, as trusted third parties not only represent single point of failures or attacks, but they also cannot guarantee global independence due to national legislation and regulatory or political influence. This article proposes to decentralize identity management in 6G networks to enable secure mutual authentication between network entities of different trust domains without relying on a trusted third party and to empower network entities with the ability to shape and strengthen cross-domain trust relationships by the exchange of verifiable credentials. A reference model for decentralized identity management in 6G is given as an initial guide for the fundamental design of a common identity management system whose operation and governance are distributed equally across multiple trust domains of interconnected and multi-stakeholder 6G ecosystems. △ Less

Submitted 11 July, 2022; v1 submitted 1 March, 2022; originally announced March 2022.

Comments: Published at the 1st International Conference on 6G Networking (6GNet 2022) in Paris, France

Journal ref: 1st Int. Conf. on 6G Networking (2022) 1-8

Decentralized Identifiers and Self-sovereign Identity in 6G

Authors: Sandro Rodriguez Garzon, Hakan Yildiz, Axel Küpper

Abstract: A key challenge for mobile network operators in 6G is to bring together and orchestrate a variety of new emerging players of today's mobile ecosystems in order to provide economically viable and seamless mobile connectivity in form of a multi-stakeholder service. With each new player, be it a cloud, edge or hardware provider, the need for interfaces with secure authentication and authorization mec… ▽ More A key challenge for mobile network operators in 6G is to bring together and orchestrate a variety of new emerging players of today's mobile ecosystems in order to provide economically viable and seamless mobile connectivity in form of a multi-stakeholder service. With each new player, be it a cloud, edge or hardware provider, the need for interfaces with secure authentication and authorization mechanisms increases, as does the complexity and operational costs of the public key infrastructures required for the identity and key management. While today's centralized public key infrastructures have proven to be technically feasible in confined and trusted spaces, they do not provide the required security for access control once centralized identity providers must be avoided because of limited cross-domain interoperability, national data protection legislation, or geopolitical-strategic reasons. Recent decentralized identity management concepts, such as the W3C recommendation of Decentralized Identifiers, provide a secure, tamper-proof, and cross-domain identity management alternative for future multi-stakeholder 6G networks without relying on centralized identity provider or certification authorities. This article introduces the concept of Decentralized Identifiers together with the principles of Self-sovereign Identity and discusses opportunities and potential benefits of their application and usage for cross-domain and privacy-preserving identity and key management in 6G networks. △ Less

Submitted 4 August, 2022; v1 submitted 17 December, 2021; originally announced December 2021.

Comments: Preprint submitted to special issue Trust, Security and Privacy of 6G of IEEE Networks on the 15th of December 2021

Journal ref: IEEE Network, Volume: 36, Issue: 4, July/August 2022

Stabilizing of a Class of Underactuated Euler Lagrange System Using an Approximate Model

Authors: Huseyin Alpaslan Yildiz, Leyla Goren-Sumer

Abstract: The energy sha** method, Controlled Lagrangian, is a well-known approach to stabilize the under-actuated Euler Lagrange (EL) systems. In this approach, to construct a control rule, some nonlinear, nonhomogeneous partial differential equations (PDEs), which are called matching conditions, must be solved. In this paper, a method is proposed to obtain an approximate solution of these matching condi… ▽ More The energy sha** method, Controlled Lagrangian, is a well-known approach to stabilize the under-actuated Euler Lagrange (EL) systems. In this approach, to construct a control rule, some nonlinear, nonhomogeneous partial differential equations (PDEs), which are called matching conditions, must be solved. In this paper, a method is proposed to obtain an approximate solution of these matching conditions for a class of under-actuated EL systems. To develop the method, the potential energy matching condition is transformed to a set of linear PDEs using an approximation of inertia matrices. So the assignable potential energy function and the controlled inertia matrix, both are constructed as a common solution of these PDEs. Afterwards, the gyroscopic and dissipative forces are found as the solution of the kinetic energy matching condition. Finally, the control rule is constructed by adding energy sha** rule and additional dissipation injection to provide asymptotic stability. The stability analysis of the closed loop system which used the control rule derived with the proposed method is also given. To demonstrate the success of the proposed method, the stability problem of the inverted pendulum on a cart is considered. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Comments: 14 pages, 7 figures

MSC Class: 93C10; 93D05 (Primary) 93D30 (Secondary)

Support Constrained Generator Matrices of Gabidulin Codes in Characteristic Zero

Authors: Hikmet Yildiz, Netanel Raviv, Babak Hassibi

Abstract: Gabidulin codes over fields of characteristic zero were recently constructed by Augot et al., whenever the Galois group of the underlying field extension is cyclic. In parallel, the interest in sparse generator matrices of Reed-Solomon and Gabidulin codes has increased lately, due to applications in distributed computations. In particular, a certain condition pertaining the intersection of zero en… ▽ More Gabidulin codes over fields of characteristic zero were recently constructed by Augot et al., whenever the Galois group of the underlying field extension is cyclic. In parallel, the interest in sparse generator matrices of Reed-Solomon and Gabidulin codes has increased lately, due to applications in distributed computations. In particular, a certain condition pertaining the intersection of zero entries at different rows, was shown to be necessary and sufficient for the existence of the sparsest possible generator matrix of Gabidulin codes over finite fields. In this paper we complete the picture by showing that the same condition is also necessary and sufficient for Gabidulin codes over fields of characteristic zero. Our proof builds upon and extends tools from the finite field case, combines them with a variant of the Schwartz-Zippel lemma over automorphisms, and provides a simple randomized construction algorithm whose probability of success can be arbitrarily close to one. In addition, potential applications for low-rank matrix recovery are discussed. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: ISIT'20

Gabidulin Codes with Support Constrained Generator Matrices

Authors: Hikmet Yildiz, Babak Hassibi

Abstract: Gabidulin codes are the first general construction of linear codes that are maximum rank distant (MRD). They have found applications in linear network coding, for example, when the transmitter and receiver are oblivious to the inner workings and topology of the network (the so-called incoherent regime). The reason is that Gabidulin codes can be used to map information to linear subspaces, which in… ▽ More Gabidulin codes are the first general construction of linear codes that are maximum rank distant (MRD). They have found applications in linear network coding, for example, when the transmitter and receiver are oblivious to the inner workings and topology of the network (the so-called incoherent regime). The reason is that Gabidulin codes can be used to map information to linear subspaces, which in the absence of errors cannot be altered by linear operations, and in the presence of errors can be corrected if the subspace is perturbed by a small rank. Furthermore, in distributed coding and distributed systems, one is led to the design of error correcting codes whose generator matrix must satisfy a given support constraint. In this paper, we give necessary and sufficient conditions on the support of the generator matrix that guarantees the existence of Gabidulin codes and general MRD codes. When the rate of the code is not very high, this is achieved with the same field size necessary for Gabidulin codes with no support constraint. When these conditions are not satisfied, we characterize the largest possible rank distance under the support constraints and show that they can be achieved by subcodes of Gabidulin codes. The necessary and sufficient conditions are identical to those that appear for MDS codes which were recently proven by Yildiz et al. and Lovett in the context of settling the GM-MDS conjecture. △ Less

Submitted 18 November, 2019; v1 submitted 22 March, 2019; originally announced March 2019.

Algorithms for Optimal Control with Fixed-Rate Feedback

Authors: Anatoly Khina, Yorie Nakahira, Yu Su, Hikmet Yıldız, Babak Hassibi

Abstract: We consider a discrete-time linear quadratic Gaussian networked control setting where the (full information) observer and controller are separated by a fixed-rate noiseless channel. The minimal rate required to stabilize such a system has been well studied. However, for a given fixed rate, how to quantize the states so as to optimize performance is an open question of great theoretical and practic… ▽ More We consider a discrete-time linear quadratic Gaussian networked control setting where the (full information) observer and controller are separated by a fixed-rate noiseless channel. The minimal rate required to stabilize such a system has been well studied. However, for a given fixed rate, how to quantize the states so as to optimize performance is an open question of great theoretical and practical significance. We concentrate on minimizing the control cost for first-order scalar systems. To that end, we use the Lloyd-Max algorithm and leverage properties of logarithmically-concave functions and sequential Bayesian filtering to construct the optimal quantizer that greedily minimizes the cost at every time instant. By connecting the globally optimal scheme to the problem of scalar successive refinement, we argue that its gain over the proposed greedy algorithm is negligible. This is significant since the globally optimal scheme is often computationally intractable. All the results are proven for the more general case of disturbances with logarithmically-concave distributions and rate-limited time-varying noiseless channels. We further extend the framework to event-triggered control by allowing to convey information via an additional "silent symbol", i.e., by avoiding transmitting bits; by constraining the minimal probability of silence we attain a tradeoff between the transmission rate and the control cost for rates below one bit per sample. △ Less

Submitted 13 September, 2018; originally announced September 2018.

Comments: Submitted to IEEE Transactions on Control of Network Systems

Optimum Linear Codes with Support Constraints over Small Fields

Authors: Hikmet Yildiz, Babak Hassibi

Abstract: We consider the problem of designing optimal linear codes (in terms of having the largest minimum distance) subject to a support constraint on the generator matrix. We show that the largest minimum distance can be achieved by a subcode of a Reed-Solomon code of small field size. As a by-product of this result, we settle the GM-MDS conjecture of Dau et. al. in the affirmative. We consider the problem of designing optimal linear codes (in terms of having the largest minimum distance) subject to a support constraint on the generator matrix. We show that the largest minimum distance can be achieved by a subcode of a Reed-Solomon code of small field size. As a by-product of this result, we settle the GM-MDS conjecture of Dau et. al. in the affirmative. △ Less

Submitted 9 March, 2018; originally announced March 2018.

Further Progress on the GM-MDS Conjecture for Reed-Solomon Codes

Authors: Hikmet Yildiz, Babak Hassibi

Abstract: Designing good error correcting codes whose generator matrix has a support constraint, i.e., one for which only certain entries of the generator matrix are allowed to be non-zero, has found many recent applications, including in distributed coding and storage, multiple access networks, and weakly secure data exchange. The dual problem, where the parity check matrix has a support constraint, comes… ▽ More Designing good error correcting codes whose generator matrix has a support constraint, i.e., one for which only certain entries of the generator matrix are allowed to be non-zero, has found many recent applications, including in distributed coding and storage, multiple access networks, and weakly secure data exchange. The dual problem, where the parity check matrix has a support constraint, comes up in the design of locally repairable codes. The central problem here is to design codes with the largest possible minimum distance, subject to the given support constraint on the generator matrix. An upper bound on the minimum distance can be obtained through a set of singleton bounds, which can be alternatively thought of as a cut-set bound. Furthermore, it is well known that, if the field size is large enough, any random generator matrix obeying the support constraint will achieve the maximum minimum distance with high probability. Since random codes are not easy to decode, structured codes with efficient decoders, e.g., Reed-Solomon codes, are much more desirable. The GM-MDS conjecture of Dau et al states that the maximum minimum distance over all codes satisfying the generator matrix support constraint can be obtained by a Reed Solomon code. If true, this would have significant consequences. The conjecture has been proven for several special case: when the dimension of the code k is less than or equal to five, when the number of distinct support sets on the rows of the generator matrix m, say, is less than or equal to three, or when the generator matrix is sparsest and balanced. In this paper, we report on further progress on the GM-MDS conjecture. In particular, we show that the conjecture is true for all m less than equal to six. This generalizes all previous known results (except for the sparsest and balanced case, which is a very special support constraint). △ Less

Submitted 24 January, 2018; originally announced January 2018.

Comments: Submitted to ISIT 2018

Compact Measurement Station for Low Energy Proton Beams

Authors: H. Yildiz, A. Ozbey, S. Oz, B. Yasatekin, G. Turemen, S. Ogur, E. Sunar, Y. A. Aydin, V. A. Dimov, G. Unel, A. Alacakir

Abstract: A compact, remote controlled, cost efficient diagnostic station has been developed to measure the charge, the profile and the emittance for low energy proton beams. It has been installed and tested in the proton beam line of the Project Prometheus at SANAEM of the Turkish Atomic Energy Authority. A compact, remote controlled, cost efficient diagnostic station has been developed to measure the charge, the profile and the emittance for low energy proton beams. It has been installed and tested in the proton beam line of the Project Prometheus at SANAEM of the Turkish Atomic Energy Authority. △ Less

Submitted 19 December, 2016; v1 submitted 27 July, 2016; originally announced July 2016.

Comments: 7 pages 2 columns

Manufacturing and the LLRF Tests of the SANAEM RFQ

Authors: G. Turemen, A. Alacakir, Y. Akgun, S. Bolukdemir, I. Kilic, B. Yasatekin, H. Yildiz, G. Unel

Abstract: The Turkish Atomic Energy Authority has been working on building an experimental proton beamline using local resources at the Saraykoy Nuclear Research and Training Center (SANAEM). The radio frequency quadrupole (RFQ) was manufactured after the completion of beam dynamics and 3D electromagnetic simulation studies. The vanes were machined using a three axis CNC machine. A CMM was used for both the… ▽ More The Turkish Atomic Energy Authority has been working on building an experimental proton beamline using local resources at the Saraykoy Nuclear Research and Training Center (SANAEM). The radio frequency quadrupole (RFQ) was manufactured after the completion of beam dynamics and 3D electromagnetic simulation studies. The vanes were machined using a three axis CNC machine. A CMM was used for both the acceptance tests of the vanes and their assembly. Production and assembly errors were found acceptable for this cavity, the very first one developed in Turkey. The aluminum vanes were copper coated by electroplating. The coated vanes were bolted and bonded with eight screws, eight pins and two different adhesives. A silver paste was used for RF sealing and a low vapor pressure epoxy was used for vacuum isolation. First LLRF tests of the RFQ were performed using the phase shift method with a bead-pull setup, a VNA, an N-type RF coupler and a pick-up loop. Cavity quality factor was measured with 3dB method for different RF sealing stages. This study summarizes the machining, assembling and the first LLRF tests of the SANAEM RFQ. △ Less

Submitted 23 June, 2016; v1 submitted 5 May, 2016; originally announced May 2016.

Comments: 4 pages, 7 figures, 1 table. Proceedings of the International Particle Accelerator Conference 2016 (IPAC'16), 8 - 13 May 2016, MOPOY051, p. 964

A Generalized Prefix Construction for OFDM Systems Over Quasi-Static Channels

Authors: T. Cooklev, H. Dogan, R. J. Cintra, H. Yildiz

Abstract: All practical OFDM systems require a prefix to eliminate inter-symbol interference at the receiver. Cyclic prefix (CP) and zero-padding are well-known prefix construction methods, the former being the most employed technique in practice due to its lower complexity. In this paper we construct an OFDM system with a generalized CP. It is shown that the proposed generalized prefix effectively makes th… ▽ More All practical OFDM systems require a prefix to eliminate inter-symbol interference at the receiver. Cyclic prefix (CP) and zero-padding are well-known prefix construction methods, the former being the most employed technique in practice due to its lower complexity. In this paper we construct an OFDM system with a generalized CP. It is shown that the proposed generalized prefix effectively makes the channel experienced by the packet different from the actual channel. Using an optimization procedure, lower bit error rates can be achieved, outperforming other prefix construction techniques. At the same time the complexity of the technique is comparable to the CP method. The presented simulation results show that the proposed technique not only outperforms the CP method, but is also more robust in the presence of channel estimation errors and mobility. The proposed method is appropriate for practical OFDM systems. △ Less

Submitted 26 January, 2016; originally announced January 2016.

Comments: 19 pages

Journal ref: IEEE Transactions on Vehicular Technology, vol. 60, no. 8, 3684-3693, 2011

Current Status of the SANAEM RFQ Accelerator Beamline

Authors: G. Turemen, B. Yasatekin, S. Ogur, V. Yildiz, O. Mete, S. Oz, A. Ozbey, H. Yildiz, F. Yaman, Y. Akgun, A. Alacakir, S. Bolukdemir, A. Bozbey, A. Sahin, G. Unel, S. Erhan

Abstract: The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability… ▽ More The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability tests are ongoing for the Inductively Coupled Plasma ion source. The measured magnetic field maps of the Low Energy Beam Transport solenoids are being used for matching various beam configurations of the ion source to the RFQ by computer simulations. The installation of the low energy diagnostics box was completed in Q1 of 2015. The production of the RFQ cavity was started with aluminum 7075-T6 which will be subsequently coated by Copper to reduce the RF (Ohmic) losses. On the RF side, the development of the hybrid power supply based on solid state and tetrode amplifiers continues. All RF transmission components have already produced with the exception of the circulator and the power coupling antenna which are in the manufacturing and design phases, respectively. The acceptance tests of the produced RF components are ongoing. This work summarizes the design, production and test phases of the above-mentioned SPP proton beamline components. △ Less

Submitted 30 September, 2015; v1 submitted 28 April, 2015; originally announced April 2015.

Comments: 3 pages, 6 figures. Proceedings of the International Particle Accelerator Conference 2015 (IPAC'15), 3-8 May 2015, THPF103, p. 3952

Status of the SPP RFQ project

Authors: G. Turemen, B. Yasatekin, H. Yildiz, A. Alacakir, G. Unel

Abstract: The SPP project at TAEK will use a 352.2 MHz 4-vane Radio Frequency Quadrupole (RFQ) to accelerate H+ ions from 20 keV to 1.5 MeV. With the design already complete, the project is at the test production phase. To this effect, a so called "cold model" of 50 cm length has been produced to validate the design approach, to perform the low power RF tests and to evaluate possible production errors. This… ▽ More The SPP project at TAEK will use a 352.2 MHz 4-vane Radio Frequency Quadrupole (RFQ) to accelerate H+ ions from 20 keV to 1.5 MeV. With the design already complete, the project is at the test production phase. To this effect, a so called "cold model" of 50 cm length has been produced to validate the design approach, to perform the low power RF tests and to evaluate possible production errors. This study will report on the current status of the low energy beam transport line (LEBT) and RFQ cavity of the SPP project. It will also discuss the design and manufacturing of the RF power supply and its transmission line. In addition, the test results from some of the LEBT components will be shown and the final RFQ design will be shared. △ Less

Submitted 28 April, 2015; v1 submitted 27 August, 2014; originally announced August 2014.

Comments: 3 pages, 7 figures, 2 tables. Proceedings of the Linear Accelerator Conference 2014 (LINAC'14), 31 Aug - 5 Sep 2014, THPP067, p. 1004

Convex Hulls under Uncertainty

Authors: Pankaj K. Agarwal, Sariel Har-Peled, Subhash Suri, Hakan Yildiz, Wuzhou Zhang

Abstract: We study the convex-hull problem in a probabilistic setting, motivated by the need to handle data uncertainty inherent in many applications, including sensor databases, location-based services and computer vision. In our framework, the uncertainty of each input site is described by a probability distribution over a finite number of possible locations including a \emph{null} location to account for… ▽ More We study the convex-hull problem in a probabilistic setting, motivated by the need to handle data uncertainty inherent in many applications, including sensor databases, location-based services and computer vision. In our framework, the uncertainty of each input site is described by a probability distribution over a finite number of possible locations including a \emph{null} location to account for non-existence of the point. Our results include both exact and approximation algorithms for computing the probability of a query point lying inside the convex hull of the input, time-space tradeoffs for the membership queries, a connection between Tukey depth and membership queries, as well as a new notion of $\some$-hull that may be a useful representation of uncertain hulls. △ Less

Submitted 25 June, 2014; originally announced June 2014.

First Look at the Physics Case of TLEP

Authors: M. Bicer, H. Duran Yildiz, I. Yildiz, G. Coignet, M. Delmastro, T. Alexopoulos, C. Grojean, S. Antusch, T. Sen, H. -J. He, K. Potamianos, S. Haug, A. Moreno, A. Heister, V. Sanz, G. Gomez-Ceballos, M. Klute, M. Zanetti, L. -T. Wang, M. Dam, C. Boehm, N. Glover, F. Krauss, A. Lenz, M. Syphers , et al. (106 additional authors not shown)

Abstract: The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is a… ▽ More The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is among the most attractive solutions proposed so far. It has a clean experimental environment, produces high luminosity for top-quark, Higgs boson, W and Z studies, accommodates multiple detectors, and can reach energies up to the t-tbar threshold and beyond. It will enable measurements of the Higgs boson properties and of Electroweak Symmetry-Breaking (EWSB) parameters with unequalled precision, offering exploration of physics beyond the Standard Model in the multi-TeV range. Moreover, being the natural precursor of the VHE-LHC, a 100 TeV hadron machine in the same tunnel, it builds up a long-term vision for particle physics. Altogether, the combination of TLEP and the VHE-LHC offers, for a great cost effectiveness, the best precision and the best search reach of all options presently on the market. This paper presents a first appraisal of the salient features of the TLEP physics potential, to serve as a baseline for a more extensive design study. △ Less

Submitted 11 December, 2013; v1 submitted 28 August, 2013; originally announced August 2013.

Comments: 43 pages, 18 figures, 11 tables, 85 references. Changes with respect to version V2: The comments from the JHEP referee are now included

Journal ref: JHEP 01 (2014) 164

The TAC IR FEL Oscillator Facility Project

Authors: B. Ketenoglu, A. Aksoy, O. Yavas, M. Tural, O. Karsli, S. Ozkorucuklu, P. Arikan, E. Kasap, H. Yildiz, B. Bilen, H. Aksakal, I. Tapan

Abstract: The TAC (Turkish Accelerator Center) IR FEL Oscillator facility, which has been supported by Turkish State Planning Organization (SPO) since 2006, will be based on a 15-40 MeV electron linac accompanying two different undulators with 2.5 cm and 9 cm periods in order to obtain IR FEL ranging between 2-250 microns. The electron linac will consist of two sequenced modules, each housing two 9-cell s… ▽ More The TAC (Turkish Accelerator Center) IR FEL Oscillator facility, which has been supported by Turkish State Planning Organization (SPO) since 2006, will be based on a 15-40 MeV electron linac accompanying two different undulators with 2.5 cm and 9 cm periods in order to obtain IR FEL ranging between 2-250 microns. The electron linac will consist of two sequenced modules, each housing two 9-cell superconducting TESLA cavities for cw operation. It is planned that the TAC IR FEL facility will be completed in 2012 at Golbasi campus of Ankara University. This facility will give an opportunity to the scientists and industry to use FEL in research and development in Turkey and our region. In this study, the results of optimization studies and present plans about construction process of the facility are presented. △ Less

Submitted 12 November, 2009; originally announced November 2009.

Comments: 3 pages, 11 figures, FEL09 Conference, August 23-28, 2009, Liverpool, UK

Anomalous resonant production of the fourth family up type quarks at the LHC

Authors: I. T. Cakir, H. Duran Yildiz, O. Cakir, G. Unel

Abstract: Considering the present limits on the masses of fourth family quarks from the Tevatron experiments, the fourth family quarks are expected to have mass larger than the top quark. Due to their expected large mass they could have different dynamics than the quarks of three families of the Standard Model. The resonant production of the fourth family up type quark t' has been studied via anomalous pr… ▽ More Considering the present limits on the masses of fourth family quarks from the Tevatron experiments, the fourth family quarks are expected to have mass larger than the top quark. Due to their expected large mass they could have different dynamics than the quarks of three families of the Standard Model. The resonant production of the fourth family up type quark t' has been studied via anomalous production subprocess gq_i-->t' (where q_i=u,c) at the LHC with the center of mass energy 10 TeV and 14 TeV. The signatures of such process are discussed within the SM decay modes. The sensitivity to anomalous coupling κ/Λ=0.1 TeV^(-1) can be reached at \sqrt{s}=10 TeV and L_int=100 pb^(-1). △ Less

Submitted 7 August, 2009; v1 submitted 2 August, 2009; originally announced August 2009.

Comments: 14 pages, 13 figures, 7 tables

Journal ref: Phys.Rev.D80:095009,2009

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Authors: The ATLAS Collaboration, G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim, A. Abdesselam, O. Abdinov, B. Abi, M. Abolins, H. Abramowicz, B. S. Acharya, D. L. Adams, T. N. Addy, C. Adorisio, P. Adragna, T. Adye, J. A. Aguilar-Saavedra, M. Aharrouche, S. P. Ahlen, F. Ahles, A. Ahmad, H. Ahmed, G. Aielli, T. Akdogan , et al. (2587 additional authors not shown)

Abstract: A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on… ▽ More A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN. △ Less

Submitted 14 August, 2009; v1 submitted 28 December, 2008; originally announced January 2009.

Single Production of Fourth Family Quarks at the LHC

Authors: O. Cakir, I. Turk Cakir, H. Duran Yildiz, R. Mehdiyev

Abstract: We study the single production of the fourth family quarks through the process pp--> Q'jX at the Large Hadron Collider (LHC). We have calculated the decay widths and branching ratios of the fourth family quarks (b' and t') in the mass range 300-800 GeV. The cross sections of signal and background processes have been calculated in a Monte Carlo framework. It is shown that the LHC can discover sin… ▽ More We study the single production of the fourth family quarks through the process pp--> Q'jX at the Large Hadron Collider (LHC). We have calculated the decay widths and branching ratios of the fourth family quarks (b' and t') in the mass range 300-800 GeV. The cross sections of signal and background processes have been calculated in a Monte Carlo framework. It is shown that the LHC can discover single t' and b' quarks if the CKM matrix elements |V_{t'q}|,|V_{qb'}|>=0.01. △ Less

Submitted 11 February, 2008; v1 submitted 2 January, 2008; originally announced January 2008.

Comments: 16 pages, 7 figures, 6 tables

Journal ref: Eur.Phys.J.C56:537-543,2008

Anomalous single production of the fourth generation charged leptons at future ep colliders

Authors: A. K. Ciftci, R. Ciftci, H. Duran Yildiz, S. Sultansoy

Abstract: Possible single productions of the fourth standard model family charged leptons via anomalous interactions at the future ep colliders are studied. Signatures of such anomalous processes and backgrounds are discussed in detail. Possible single productions of the fourth standard model family charged leptons via anomalous interactions at the future ep colliders are studied. Signatures of such anomalous processes and backgrounds are discussed in detail. △ Less

Submitted 18 December, 2006; originally announced December 2006.

Comments: 7 pages, 5 figures

Journal ref: Mod.Phys.Lett.A23:1047-1054,2008