Showing 1–15 of 15 results for author: Yeoh, W K

Investigation of Electron-Phonon Coupling in Epitaxial Silicene by In-situ Raman Spectroscopy

Authors: **cheng Zhuang, Xun Xu, Yi Du, Kehui Wu, Lan Chen, Weichang Hao, Jiaou Wang, Wai Kong Yeoh, Xiaolin Wang, Shi Xue Dou

Abstract: In this letter, we report that the special coupling between Dirac fermion and lattice vibrations, in other words, electron-phonon coupling (EPC), in silicene layers on Ag(111) surface was probed by an in-situ Raman spectroscopy. We find the EPC is significantly modulated due to tensile strain, which results from the lattice mismatch between silicene and the substrate, and the charge do** from th… ▽ More In this letter, we report that the special coupling between Dirac fermion and lattice vibrations, in other words, electron-phonon coupling (EPC), in silicene layers on Ag(111) surface was probed by an in-situ Raman spectroscopy. We find the EPC is significantly modulated due to tensile strain, which results from the lattice mismatch between silicene and the substrate, and the charge do** from the substrate. The special phonon modes corresponding to two-dimensional electron gas scattering at edge sites in the silicene were identified. Detecting relationship between EPC and Dirac fermion through the Raman scattering will provide a direct route to investigate the exotic property in buckled two-dimensional honeycomb materials. △ Less

Submitted 16 February, 2015; originally announced February 2015.

Comments: 15 pages, 4 figures

Unabridged phase diagram for single-phased FeSexTe1-x thin films

Authors: **cheng Zhuang, Wai Kong Yeoh, Xiangyuan Cui, Xun Xu, Yi Du, Zhixiang Shi, Simon P. Ringer, Xiaolin Wang, Shi Xue Dou

Abstract: A complete phase diagram and its corresponding physical properties are essential prerequisites to understand the underlying mechanism of iron based superconductivity. For the structurally simplest 11 (FeSeTe) system, earlier attempts using bulk samples have not been able to do so due to the fabrication difficulties. Here, thin FeSexTe1-x films with the Se content covering the full range were fabri… ▽ More A complete phase diagram and its corresponding physical properties are essential prerequisites to understand the underlying mechanism of iron based superconductivity. For the structurally simplest 11 (FeSeTe) system, earlier attempts using bulk samples have not been able to do so due to the fabrication difficulties. Here, thin FeSexTe1-x films with the Se content covering the full range were fabricated by using pulsed laser deposition method. Crystal structure analysis shows that all films retain the tetragonal structure in room temperature. Significantly, the highest superconducting transition temperature (TC = 20 K) occurs in the newly discovered domain, 0.6 - 0.8. The single-phased superconducting dome for the full Se do** range is the first of its kind in iron chalcogenide superconductors. Our results present a new avenue to explore novel physics as well as to optimize superconductors. △ Less

Submitted 2 December, 2014; originally announced December 2014.

Journal ref: Scientific Reports 4, 7273 (2014)

Enhancement of Transition Temperature in FexSe0.5Te0.5 Film via Iron Vacancies

Authors: J. C. Zhuang, W. K. Yeoh, X. Y. Cui, J. H. Kim, D. Q. Shi, Z. X. Shi, S. P. Ringer, X. L. Wang, S. X. Dou

Abstract: The effects of iron deficiency in FexSe0.5Te0.5 thin films (0.8<x<1) on superconductivity and electronic properties have been studied. A significant enhancement of the superconducting transition temperature (TC) up to 21K was observed in the most Fe deficient film (x=0.8). Based on the observed and simulated structural variation results, there is a high possibility that Fe vacancies can be formed… ▽ More The effects of iron deficiency in FexSe0.5Te0.5 thin films (0.8<x<1) on superconductivity and electronic properties have been studied. A significant enhancement of the superconducting transition temperature (TC) up to 21K was observed in the most Fe deficient film (x=0.8). Based on the observed and simulated structural variation results, there is a high possibility that Fe vacancies can be formed in the FexSe0.5Te0.5 films. The enhancement of TC shows a strong relationship with the lattice strain effect induced by Fe vacancies. Importantly, the presence of Fe vacancies alters the charge carrier population by introducing electron charge carriers, with the Fe deficient film showing more metallic behavior than the defect-free film. Our study provides a means to enhance the superconductivity and tune the charge carriers via Fe vacancy, with no reliance on chemical do**. △ Less

Submitted 7 July, 2014; originally announced July 2014.

Comments: 15 pages, 4 figures

Journal ref: Applied Physics Letters 104, 262601 (2014)

On the roles of graphene oxide do** for enhanced supercurrent in MgB2 based superconductors

Authors: W. K. Yeoh, X. Y. Cui, B. Gault, K. S. B. De Silva, X. Xu, H. W. Liu, H. W. Yen, D. Wong, P. Bao, D. J. Larson, I. Martin, W. X. Li, R. K. Zheng, X. L. Wang, S. X. Dou, S. P. Ringer

Abstract: Due to their graphene-like properties after oxygen reduction, incorporation of graphene oxide (GO) sheets into correlated-electron materials offers a new pathway for tailoring their properties. Fabricating GO nanocomposites with polycrystalline MgB2 superconductors leads to an order of magnitude enhancement of the supercurrent at 5 K/8 T and 20 K/4 T. Herein, we introduce a novel experimental appr… ▽ More Due to their graphene-like properties after oxygen reduction, incorporation of graphene oxide (GO) sheets into correlated-electron materials offers a new pathway for tailoring their properties. Fabricating GO nanocomposites with polycrystalline MgB2 superconductors leads to an order of magnitude enhancement of the supercurrent at 5 K/8 T and 20 K/4 T. Herein, we introduce a novel experimental approach to overcome the formidable challenge of performing quantitative microscopy and microanalysis of such composites, so as to unveil how GO do** influences the structure and hence the material properties. Atom probe microscopy and electron microscopy were used to directly image the GO within the MgB2, and we combined these data with computational simulations to derive the property-enhancing mechanisms. Our results reveal synergetic effects of GO, namely, via localized atomic (carbon and oxygen) do** as well as texturing of the crystals, which provide both inter and intra granular flux pinning. This study opens up new insights into how low-dimensional nanostructures can be integrated into composites to modify the overall properties, using a methodology amenable to a wide range of applications. △ Less

Submitted 19 May, 2014; originally announced May 2014.

Journal ref: Nanoscale, 2014,6, 6166-6172

Reaction method control of impurity scattering in C-doped MgB2, proving the role of defects besides C substitution level

Authors: S K Chen, K Y Tan, A S Halim, X Xu, K S B De Silva, W K Yeoh, S X Dou, A Kursumovic, J L MacManus-Driscoll

Abstract: In this study, Si and C were incorporated into polycrystalline MgB2 via in situ reaction of Mg and B with either SiC or with separate Si and C (Si+C). The electrical transport and magnetic properties of the two series of samples were compared. The corrected resistivity at 40K, Rho A(40K), is higher for the SiC reacted samples regardless of carbon (C) substitution level, indicating larger intragrai… ▽ More In this study, Si and C were incorporated into polycrystalline MgB2 via in situ reaction of Mg and B with either SiC or with separate Si and C (Si+C). The electrical transport and magnetic properties of the two series of samples were compared. The corrected resistivity at 40K, Rho A(40K), is higher for the SiC reacted samples regardless of carbon (C) substitution level, indicating larger intragrain scattering because of the simultaneous reaction between Mg and SiC and carbon substitution during the formation of MgB2. In addition, because of the cleaner reaction route for the SiC reacted samples, the calculated active area that carries current, AF, is twice that of the (Si+C) samples. On the other hand, the upper critical field, Hc2, was similar for both sets of samples despite their different C substitution levels which proves the importance of defect scattering in addition to C substitution level. Hence, the form of the precursor reactants is critical for tuning the form of Hc2(T). △ Less

Submitted 30 October, 2013; originally announced October 2013.

Comments: accepted for publication

Report number: Supercond. Sci. Technol. 26 125018

Co-development of significant elastic and reversible plastic deformation in nanowires

Authors: Peite Bao, Yanbo Wang, Xiangyuan Cui, Qiang Gao, Hongwei Liu, Wai Kong Yeoh, Hung-Wei Yen, Xiaozhou Liao, Sichao Du, H. Hoe Tan, Chennupati Jagadish, ** Zou, Simon P. Ringer, Rongkun Zheng

Abstract: When a material is subjected to an applied stress, the material will experience recoverable elastic deformation followed by permanent plastic deformation at the point when the applied stress exceeds the yield stress of the material. Microscopically, the onset of the plasticity usually indicates the activation of dislocation motion, which is considered to be the primary mechanism of plastic deforma… ▽ More When a material is subjected to an applied stress, the material will experience recoverable elastic deformation followed by permanent plastic deformation at the point when the applied stress exceeds the yield stress of the material. Microscopically, the onset of the plasticity usually indicates the activation of dislocation motion, which is considered to be the primary mechanism of plastic deformation. Once plastic deformation is initiated, further elastic deformation is negligible owing to the limited increase in the flow stress caused by work hardening. Here we present experimental evidence and quantitative analysis of simultaneous development of significant elastic deformation and dislocation-based plastic deformation in single crystal GaAs nanowires (NWs) under bending deformation up to a total strain of ~ 6%. The observation is in sharp contrast to the previous notions regarding the deformation modes. Most of the plastic deformation recovers spontaneously when the external stress is released, and therefore resembles an elastic deformation process. △ Less

Submitted 12 March, 2013; originally announced March 2013.

Direct observation of local K variation and its correlation to electronic inhomogeneity in (Ba1-xKx)Fe2As2 Pnictide

Authors: W. K. Yeoh, B. Gault, X. Y. Cui, C. Zhu, M. P. Moody, L. Li, R. K. Zheng, W. X Li, X. L. Wang, S. X. Dou, C. T. Lin, S. P. Ringer

Abstract: Local fluctuations in the distribution of dopant atoms are a suspected cause of nanoscale electronic disorder or phase separation observed within the pnictide superconductors. Atom probe tomography results present the first direct observations of dopant nano-clustering in a K-doped 122-phase pnictides. First-principles calculations suggest the coexistence of static magnetism and superconductivity… ▽ More Local fluctuations in the distribution of dopant atoms are a suspected cause of nanoscale electronic disorder or phase separation observed within the pnictide superconductors. Atom probe tomography results present the first direct observations of dopant nano-clustering in a K-doped 122-phase pnictides. First-principles calculations suggest the coexistence of static magnetism and superconductivity on a lattice parameter length scale over a large range of do** concentrations. Collectively, our results provide evidence for a mixed scenario of phase coexistence and phase separation originating from variation of dopant atom experiments distroibutions. △ Less

Submitted 18 May, 2011; v1 submitted 3 April, 2011; originally announced April 2011.

Comments: 4 pages, 4 figures and 1 table, accepted by Physical Review Letter 2011

Journal ref: Phys. Rev. Lett. 106, 247002 (2011)

Graphene do** to enhance flux pinning and supercurrent carrying ability in magnesium diboride superconductor

Authors: X. Xu, S. X. Dou, X. L. Wang, J. H. Kim, J. A. Stride, M. Choucair, W. K. Yeoh, R. K. Zheng, S. P. Ringer

Abstract: It has been shown that graphene do** is sufficient to lead to an improvement in the critical current density - field performance (Jc(B)), with little change in the transition temperature in MgB2. At 3.7 at% graphene do** of MgB2 an optimal enhancement in Jc(B) was reached by a factor of 30 at 5 K and 10 T, compared to the un-doped sample. The results suggested that effective carbon substitut… ▽ More It has been shown that graphene do** is sufficient to lead to an improvement in the critical current density - field performance (Jc(B)), with little change in the transition temperature in MgB2. At 3.7 at% graphene do** of MgB2 an optimal enhancement in Jc(B) was reached by a factor of 30 at 5 K and 10 T, compared to the un-doped sample. The results suggested that effective carbon substitutions by grapheme, 2D nature of grapheme and the strain effect induced by difference thermal coefficient between single grapheme sheet and MgB2 superconductor may play an important role in flux pinning enhancement. △ Less

Submitted 27 January, 2010; originally announced January 2010.

Mechanism of enhancement of electromagnetic properties of MgB2 by nano-SiC do**

Authors: S. X. Dou, O. Shcherbakova, W. K. Yeoh, J. H. Kim, S. Soltanian, X. L. Wang, C. Senatore, R. Flukiger, M. Dhalle, O. Husnjak, E. Babic

Abstract: A comparative study of pure, SiC, and C doped MgB2 wires has revealed that the SiC do** allowed C substitution and MgB2 formation to take place simultaneously at low temperatures. C substitution enhances Hc2, while the defects, small grain size and nanoinclusions induced by C incorporation and low temperature processing are responsible for the improvement in Jc. The irreversibility field (Hirr… ▽ More A comparative study of pure, SiC, and C doped MgB2 wires has revealed that the SiC do** allowed C substitution and MgB2 formation to take place simultaneously at low temperatures. C substitution enhances Hc2, while the defects, small grain size and nanoinclusions induced by C incorporation and low temperature processing are responsible for the improvement in Jc. The irreversibility field (Hirr) for the SiC doped sample reached the benchmarking value of 10 T at 20 K, exceeding that of NbTi at 4.2 K. This dual reaction model also enables us to predict desirable dopants for enhancing the performance properties of MgB2. △ Less

Submitted 1 March, 2007; v1 submitted 16 January, 2007; originally announced January 2007.

Comments: 15 pages, 4 figures, 1 table. accepted for publication in Physical Review Letter

Journal ref: Phys. Rev. Lett. 98, 097002 (2007)

Improvement of Critical Current Density and Upper Critical Field in MgB2 using Carbohydrate

Authors: J. H. Kim, M. S. A. Hossain, X. Xu, W. K. Yeoh, D. Q. Shi, S. X. Dou, S. Ryu, M. Rindfleisch, M. Tomsic

Abstract: We evaluated the do** effects of carbohydrate (malic acid, C4H6O5), from 0wt% to 30wt% of total MgB2, on the phase, lattice parameters, critical temperature, resistivity, and upper critical field of MgB2 superconductor. The lattice parameters calculated show a large decrease in the a-axis for MgB2 + C4H6O5 samples, but no change in the c-axis. This is an indication of the carbon substitution i… ▽ More We evaluated the do** effects of carbohydrate (malic acid, C4H6O5), from 0wt% to 30wt% of total MgB2, on the phase, lattice parameters, critical temperature, resistivity, and upper critical field of MgB2 superconductor. The lattice parameters calculated show a large decrease in the a-axis for MgB2 + C4H6O5 samples, but no change in the c-axis. This is an indication of the carbon substitution into boron coming from C4H6O5, resulting in enhancement of resistivity, critical current density, and upper critical field. Specifically, the critical current density value of 25000 Acm2 at 5 K and 8 T for the MgB2 + 30wt% C4H6O5 sample is higher than that of the un-doped MgB2 by a factor of 21. In addition, resistivity value for all the MgB2 + C4H6O5 samples ranged from 80 to 90 microohm centimeter at 40 K, which is higher than for un-doped MgB2. The increased resistivity indicates increased impurity scattering due to carbon, resulting in enhanced upper critical field. △ Less

Submitted 18 December, 2006; originally announced December 2006.

Comments: 4 page, 5 figures, ASC2006 conference

Report number: number 1LS04

Enhancement of in-field Jc in MgB2/Fe wire using single and multi-walled nanotubes

Authors: J. H. Kim, W. K. Yeoh, M. J. Qin, X. Xu, S. X. Dou, P. Munroe, H. Kumakura, T. Nakane, C. H. Jiang

Abstract: We investigated the do** effects of SWCNTs and MWCNTs on the Tc, lattice parameters, Jc(B), microstructure, and Hc2 of MgB2/Fe wire. These effects systematically showed the following sequence for Tc and the a-axis: the SWCNT doped wire < the MWshortCNT doped wire < the MWlongCNT doped wire < un-doped wire, while Jc(B) followed the sequence of the SWCNT doped wire > the MWshortCNT doped wire >… ▽ More We investigated the do** effects of SWCNTs and MWCNTs on the Tc, lattice parameters, Jc(B), microstructure, and Hc2 of MgB2/Fe wire. These effects systematically showed the following sequence for Tc and the a-axis: the SWCNT doped wire < the MWshortCNT doped wire < the MWlongCNT doped wire < un-doped wire, while Jc(B) followed the sequence of the SWCNT doped wire > the MWshortCNT doped wire > the MWlongCNT doped wire > un-doped wire. A dominating mechanism behind all these findings is the level of C substitution for B in the lattice. The best Jc(B) and Hc2 were obtained on SWCNT doped wire because the level of C substitution for B in this wire is higher than all others. △ Less

Submitted 21 July, 2006; originally announced July 2006.

Comments: 18 pages, 4 figures, 2 tables. accepted by applied physics letters

The do** effect of multiwall carbon nanotube on MgB2/Fe superconductor wire

Authors: J. H. Kim, W. K. Yeoh, M. J. Qin, X. Xu, S. X. Dou

Abstract: We evaluated the do** effect of two types of multiwall carbon nanotube (CNT) with different aspect ratios on MgB2/Fe monofilament wires. Relationships between microstructure, magnetic critical current density (Jc), critical temperature (Tc), upper critical field (Hc2), and irreversibility field (Hirr) for pure and CNT doped wires were systematically studied for sintering temperature from 650oC… ▽ More We evaluated the do** effect of two types of multiwall carbon nanotube (CNT) with different aspect ratios on MgB2/Fe monofilament wires. Relationships between microstructure, magnetic critical current density (Jc), critical temperature (Tc), upper critical field (Hc2), and irreversibility field (Hirr) for pure and CNT doped wires were systematically studied for sintering temperature from 650oC to 1000oC. As the sintering temperature increased, Tc for short CNT doped sample slightly decreased, while Tc for long CNT doped sample increased. This indicates better reactivity between MgB2 and short CNT due to its small aspect ratio and substitution of carbon (C) from short CNT for boron (B) occurs. In addition, short CNT doped samples sintered at the high temperatures of 900oC and 1000oC exhibited excellent Jc, and that value was approximately 104 A/cm2 in fields up to 8 T at 5 K. This suggests that short CNT is a promising carbon source for MgB2 superconductor with excellent Jc. In particular, inclusion of nanosized MgO particles and substitution of C into the MgB2 lattice could result in strong flux pinning centers. △ Less

Submitted 21 March, 2006; originally announced March 2006.

Comments: 18 pages, 7 figures

Magnetic field processing to enhance critical current densities of MgB2 superconductors

Authors: S. X. Dou, W. K. Yeoh, O. Shcherbakova, J. Horvat, M. J. Qin, Y. Li, Z. M. Ren, P. Munroe

Abstract: Magnetic field of up to 12 T was applied during the sintering process of pure MgB2 and carbon nanotube (CNT) doped MgB2 wires. We have demonstrated that magnetic field processing results in grain refinement, homogeneity and significant enhancement in Jc(H) and Hirr. The Jc of pure MgB2 wire increased by up to a factor of 3 to 4 and CNT doped MgB2 by up to an order of magnitude in high field regi… ▽ More Magnetic field of up to 12 T was applied during the sintering process of pure MgB2 and carbon nanotube (CNT) doped MgB2 wires. We have demonstrated that magnetic field processing results in grain refinement, homogeneity and significant enhancement in Jc(H) and Hirr. The Jc of pure MgB2 wire increased by up to a factor of 3 to 4 and CNT doped MgB2 by up to an order of magnitude in high field region respectively, compared to that of the non-field processed samples. Hirr for CNT doped sample reached 7.7 T at 20 K. Magnetic field processing reduces the resistivity in CNT doped MgB2, straightens the entangled CNT and improves the adherence between CNTs and MgB2 matrix. No crystalline alignment of MgB2 was observed. This method can be easily scalable for a continuous production and represents a new milestone in the development of MgB2 superconductors and related systems. △ Less

Submitted 10 January, 2006; originally announced January 2006.

Interaction between superconductor and ferromagnetic domains in iron sheath: peak effect in MgB2/Fe wires

Authors: J. Horvat, W. K. Yeoh, L. M. Miller

Abstract: Interaction between the superconductor and ferromagnet in MgB2/Fe wires results in either a plateau or a peak effect in the field dependence of transport critical current, Ic(H). This is in addition to magnetic shielding of external field. Current theoretical models cannot account for the observed peak effect in Ic(H). This paper shows that the theoretical explanation of the peak effect should b… ▽ More Interaction between the superconductor and ferromagnet in MgB2/Fe wires results in either a plateau or a peak effect in the field dependence of transport critical current, Ic(H). This is in addition to magnetic shielding of external field. Current theoretical models cannot account for the observed peak effect in Ic(H). This paper shows that the theoretical explanation of the peak effect should be sought in terms of interaction between superconductor and magnetic domain structure, obtained after re-magnetization of the iron sheath by the self-field of the current. There is a minimum value of critical current, below which the re-magnetization of the iron sheath and peak effect in Ic(H) are not observed. △ Less

Submitted 21 July, 2005; originally announced July 2005.

Journal ref: Appl. Phys. Lett. 87, 102503 (2005)

Effect of carbon nanotube do** on critical current density of MgB2 superconductor

Authors: S. X. Dou, W. K. Yeoh, J. Horvat, M. Ionescu

Abstract: The effect of do** MgB2 with carbon nanotubes on transition temperature, lattice parameters, critical current density and flux pinning was studied for MgB2-xCx with x = 0, 0.05, 0.1, 0.2 and 0.3. The carbon substitution for B was found to enhance Jc in magnetic fields but depress Tc. The depression of Tc, which is caused by the carbon substitution for B, increases with increasing do** level,… ▽ More The effect of do** MgB2 with carbon nanotubes on transition temperature, lattice parameters, critical current density and flux pinning was studied for MgB2-xCx with x = 0, 0.05, 0.1, 0.2 and 0.3. The carbon substitution for B was found to enhance Jc in magnetic fields but depress Tc. The depression of Tc, which is caused by the carbon substitution for B, increases with increasing do** level, sintering temperature and duration. By controlling the extent of the substitution and addition of carbon nanotubes we can achieve the optimal improvement on critical current density and flux pinning in magnetic fields while maintaining the minimum reduction in Tc. Under these conditions, Jc was enhanced by two orders of magnitude at 8T and 5K and 7T and 10K. Jc was more than 10,000A/cm2 at 20K and 4T and 5K and 8.5T, respectively. △ Less

Submitted 9 October, 2003; originally announced October 2003.

Journal ref: Appl. Phys. Lett. 83, 4996 (2003)