-
Hydrogen-induced tunable remanent polarization in a perovskite nickelate
Authors:
Yifan Yuan,
Michele Kotiuga,
Tae Joon Park,
Yuanyuan Ni,
Arnob Saha,
Hua Zhou,
Jerzy T. Sadowski,
Abdullah Al-Mahboob,
Haoming Yu,
Kai Du,
Minning Zhu,
Sunbin Deng,
Ravindra S. Bisht,
Xiao Lyu,
Chung-Tse Michael Wu,
Peide D. Ye,
Abhronil Sengupta,
Sang-Wook Cheong,
Xiaoshan Xu,
Karin M. Rabe,
Shriram Ramanathan
Abstract:
Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor do**, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an insulating phase with both metastable dipolar polarization and space-charge polarization. We then demonstrate transient negative differential ca…
▽ More
Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor do**, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an insulating phase with both metastable dipolar polarization and space-charge polarization. We then demonstrate transient negative differential capacitance in thin film capacitors. The space-charge polarization caused by long-range movement and trap** of protons dominates when the electric field exceeds the threshold value. First-principles calculations suggest the polarization originates from the polar structure created by H do**. We find that polarization decays within ~1 second which is an interesting temporal regime for neuromorphic computing hardware design, and we implement the transient characteristics in a neural network to demonstrate unsupervised learning. These discoveries open new avenues for designing novel ferroelectric materials and electrets using light-ion do**.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Tunable Circular Photogalvanic and Photovoltaic Effect in 2D Tellurium with Different Chirality
Authors:
Chang Niu,
Shouyuan Huang,
Neil Ghosh,
Pukun Tan,
Mingyi Wang,
Wenzhuo Wu,
Xianfan Xu,
Peide D. Ye
Abstract:
Chirality arises from the asymmetry of matters, where two counterparts are the mirror image of each other. The interaction between circular-polarization light and quantum materials is enhanced in chiral space groups due to the structural chirality. Tellurium (Te) possesses the simplest chiral crystal structure, with Te atoms covalently bonded into a spiral atomic chain (left- or right-handed) with…
▽ More
Chirality arises from the asymmetry of matters, where two counterparts are the mirror image of each other. The interaction between circular-polarization light and quantum materials is enhanced in chiral space groups due to the structural chirality. Tellurium (Te) possesses the simplest chiral crystal structure, with Te atoms covalently bonded into a spiral atomic chain (left- or right-handed) with a periodicity of three. Here, we investigate the tunable circular photo-electric responses in 2D Te field-effect transistor with different chirality, including the longitudinal circular photogalvanic effect induced by the radial spin texture (electron-spin polarization parallel to the electron momentum direction) and the circular photovoltaic induced by the chiral crystal structure (helical Te atomic chains). Our work demonstrates the controllable manipulation of the chirality degree of freedom in materials.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
A Gate-All-Around Single-Channel In2O3 Nanoribbon FET with Near 20 mA/μm Drain Current
Authors:
Zhuocheng Zhang,
Zehao Lin,
Pai-Ying Liao,
Vahid Askarpour,
Hongyi Dou,
Zhongxia Shang,
Adam Charnas,
Mengwei Si,
Sami Alajlouni,
**hyun Noh,
Ali Shakouri,
Haiyan Wang,
Mark Lundstrom,
Jesse Maassen,
Peide D. Ye
Abstract:
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielect…
▽ More
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielectric HfO2 of 5 nm. The record high drain current obtained from an In2O3 FET is about one order of magnitude higher than any conventional single-channel semiconductor FETs. This extraordinary drain current and its related on-state performance demonstrate ALD In2O3 is a promising oxide semiconductor channel with great opportunities in BEOL compatible monolithic 3D integration.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
A Nanometer-Thick Oxide Semiconductor Transistor with Ultra-High Drain Current
Authors:
Zehao Lin,
Mengwei Si,
Vahid Askarpour,
Chang Niu,
Adam Charnas,
Zhongxia Shang,
Yizhi Zhang,
Yaoqiao Hu,
Zhuocheng Zhang,
Pai-Ying Liao,
Kyeongjae Cho,
Haiyan Wang,
Mark Lundstrom,
Jesse Maassen,
Peide D. Ye
Abstract:
High drive current is a critical performance parameter in semiconductor devices for high-speed, low-power logic applications or high-efficiency, high-power, high-speed radio frequency (RF) analog applications. In this work, we demonstrate an In2O3 transistor grown by atomic layer deposition (ALD) at back-end-of-line (BEOL) compatible temperatures with a record high drain current exceeding 10 A/mm,…
▽ More
High drive current is a critical performance parameter in semiconductor devices for high-speed, low-power logic applications or high-efficiency, high-power, high-speed radio frequency (RF) analog applications. In this work, we demonstrate an In2O3 transistor grown by atomic layer deposition (ALD) at back-end-of-line (BEOL) compatible temperatures with a record high drain current exceeding 10 A/mm, the performance of which is 2-3 times better than all known transistors with semiconductor channels. A record high transconductance of 4 S/mm is also achieved among all transistors with a planar structure. It is found that a high carrier density and high electron velocity both contribute to this remarkably high on-state performance in ALD In2O3 transistors, which is made possible by the high-quality oxide/oxide interface, the metal-like charge-neutrality-level (CNL) alignment, and the high band velocities induced by the low density-of-state (DOS). Experimental Hall, I-V and split C-V measurements at room temperature confirm a high carrier density up to 6-7*10^13 /cm2 and a high velocity of about 10^7 cm/s. Ultra-thin oxide semiconductors, with a CNL located deep inside the conduction band, represent a promising new direction for the search of alternative channel materials for high-performance semiconductor devices.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
Scaled indium oxide transistors fabricated using atomic layer deposition
Authors:
Mengwei Si,
Zehao Lin,
Zhizhong Chen,
Xing Sun,
Haiyan Wang,
Peide D. Ye
Abstract:
In order to continue to improve integrated circuit performance and functionality, scaled transistors with short channel lengths and low thickness are needed. But the further scaling of silicon-based devices and the development of alternative semiconductor channel materials that are compatible with current fabrication processes is challenging. Here we report atomic-layer-deposited indium oxide tran…
▽ More
In order to continue to improve integrated circuit performance and functionality, scaled transistors with short channel lengths and low thickness are needed. But the further scaling of silicon-based devices and the development of alternative semiconductor channel materials that are compatible with current fabrication processes is challenging. Here we report atomic-layer-deposited indium oxide transistors with channel lengths down to 8 nm, channel thicknesses down to 0.5 nm and equivalent dielectric oxide thickness down to 0.84 nm. Due to the scaled device dimensions and low contact resistance, the devices exhibit high on-state currents of 3.1 A/mm at a drain voltage of 0.5 V and a transconductance of 1.5 S/mm at a drain voltage 1 V. Our devices are a promising alternative channel material for scaled transistors with back-end-of-line processing compatibility.
△ Less
Submitted 5 March, 2022;
originally announced March 2022.
-
Tunable Chirality-dependent Nonlinear Electrical Responses in 2D Tellurium
Authors:
Chang Niu,
Gang Qiu,
Yixiu Wang,
Pukun Tan,
Mingyi Wang,
Jie Jian,
Haiyan Wang,
Wenzhuo Wu,
Peide D. Ye
Abstract:
Tellurium (Te) is an elemental semiconductor with a simple chiral crystal structure. Te in a two-dimensional (2D) form synthesized by solution-based method shows excellent electrical, optical, and thermal properties. In this work, the chirality of hydrothermally grown 2D Te is identified and analyzed by hot sulfuric acid etching and high-angle tilted high-resolution scanning transmission electron…
▽ More
Tellurium (Te) is an elemental semiconductor with a simple chiral crystal structure. Te in a two-dimensional (2D) form synthesized by solution-based method shows excellent electrical, optical, and thermal properties. In this work, the chirality of hydrothermally grown 2D Te is identified and analyzed by hot sulfuric acid etching and high-angle tilted high-resolution scanning transmission electron microscopy. The gate-tunable nonlinear electrical responses, including the nonreciprocal electrical transport in the longitudinal direction and the nonlinear planar Hall effect in the transverse direction, are observed in 2D Te under a magnetic field. Moreover, the nonlinear electrical responses have opposite signs in left- and right-handed 2D Te due to the opposite spin polarizations ensured by the chiral symmetry. The fundamental relationship between the spin-orbit coupling and the crystal symmetry in two enantiomers provides a viable platform for realizing chirality-based electronic devices by introducing the chirality degree of freedom into electron transport.
△ Less
Submitted 12 September, 2023; v1 submitted 21 January, 2022;
originally announced January 2022.
-
Ionic control over ferroelectricity in 2D layered van der Waals capacitors
Authors:
Sabine M. Neumayer,
Mengwei Si,
Junkang Li,
Pai-Ying Liao,
Lei Tao,
Andrew O'Hara,
Sokrates T. Pantelides,
Peide D. Ye,
Petro Maksymovych,
Nina Balke
Abstract:
The van der Waals layered material CuInP2S6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneo…
▽ More
The van der Waals layered material CuInP2S6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the build-up of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by ~50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions.
△ Less
Submitted 19 January, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
Bilayer Quantum Hall States in an n-type Wide Tellurium Quantum Well
Authors:
Chang Niu,
Gang Qiu,
Yixiu Wang,
Mengwei Si,
Wenzhuo Wu,
Peide D. Ye
Abstract:
Tellurium (Te) is a narrow bandgap semiconductor with a unique chiral crystal structure. The topological nature of electrons in the Te conduction band can be studied by realizing n-type do** using atomic layer deposition (ALD) technique on two-dimensional (2D) Te film. In this work, we fabricated and measured the double-gated n-type Te Hall-bar devices, which can operate as two separate or coupl…
▽ More
Tellurium (Te) is a narrow bandgap semiconductor with a unique chiral crystal structure. The topological nature of electrons in the Te conduction band can be studied by realizing n-type do** using atomic layer deposition (ALD) technique on two-dimensional (2D) Te film. In this work, we fabricated and measured the double-gated n-type Te Hall-bar devices, which can operate as two separate or coupled electron layers controlled by the top gate and back gate. Profound Shubnikov-de Haas (SdH) oscillations are observed in both top and bottom electron layers. Landau level hybridization between two layers, compound and charge-transferable bilayer quantum Hall states at filling factor 4, 6, and 8 are analyzed. Our work opens the door for the study of Weyl physics in coupled bilayer systems of 2D materials.
△ Less
Submitted 18 July, 2021;
originally announced July 2021.
-
The Critical Role of Charge Balance on the Memory Characteristics of Ferroelectric Field-Effect Transistors
Authors:
Mengwei Si,
Peide D. Ye
Abstract:
Ferroelectric field-effect transistors (Fe-FETs) with ferroelectric hafnium oxide (FE HfO2) as gate insulator are being extensively explored as a promising device candidate for three-dimensional (3D) NAND memory application. FE HfO2 exhibits long retention over 10 years, high endurance over 1012 cycles, high speed with sub-ns polarization switching, and high remnant polarization of 10-30 μC/cm2. H…
▽ More
Ferroelectric field-effect transistors (Fe-FETs) with ferroelectric hafnium oxide (FE HfO2) as gate insulator are being extensively explored as a promising device candidate for three-dimensional (3D) NAND memory application. FE HfO2 exhibits long retention over 10 years, high endurance over 1012 cycles, high speed with sub-ns polarization switching, and high remnant polarization of 10-30 μC/cm2. However, the performance of Fe-FETs is known to be much worse than FE HfO2 capacitors, which is not completely understood. In this work, we developed a comprehensive Fe-FET model based on a charge balance framework. The role of charge balance and the impact of leakage-assist-switching mechanism on the memory characteristics of Fe-FETs with M/FE/DE/S (Metal/Ferroelectric/Dielectric/Semiconductor) gate stack is studied. It is found that the FE/DE interface and DE layer instead of FE layer is critical to determine the memory characteristics of Fe-FETs, and experimental Fe-FETs can be well explained by this model, where the discrepancy between FE capacitors and Fe-FETs are successfully understood.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Multi-domain Polarization Switching in Hf0.5Zr0.5O2-Dielectric Stack: The Role of Dielectric Thickness
Authors:
Atanu K. Saha,
Mengwei Si,
Peide D. Ye,
Sumeet K. Gupta
Abstract:
We investigate the polarization switching mechanism in ferroelectric-dielectric (FE-DE) stacks and its dependence on the dielectric thickness (TDE). We fabricate HZO-Al2O3 (FE-DE) stack and experimentally demonstrate a decrease in remnant polarization and an increase in coercive voltage of the FE-DE stack with an increase in TDE. Using phase-field simulations, we show that an increase in TDE resul…
▽ More
We investigate the polarization switching mechanism in ferroelectric-dielectric (FE-DE) stacks and its dependence on the dielectric thickness (TDE). We fabricate HZO-Al2O3 (FE-DE) stack and experimentally demonstrate a decrease in remnant polarization and an increase in coercive voltage of the FE-DE stack with an increase in TDE. Using phase-field simulations, we show that an increase in TDE results in a larger number of reverse domains in the FE layer to suppress the depolarization field, which leads to a decrease in remanent polarization and an increase in coercive voltage. Further, the applied voltage-driven polarization switching suggests domain-nucleation dominant characteristics for low TDE, and domain-wall motion-induced behavior for higher TDE. In addition, we show that the hysteretic charge-voltage characteristics of the FE layer in the FE-DE stack exhibit a negative slope region due to the multi-domain polarization switching in the FE layer. Based on our analysis, the trends in charge-voltage characteristics of the FE-DE stack with respect to different TDE (which are out of the scope of single-domain models) can be described well with multi-domain polarization switching mechanisms.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
First Demonstration of Robust Tri-Gate \b{eta}-Ga2O3 Nano-membrane Field-Effect Transistors Operated Up to 400 °C
Authors:
Hagyoul Bae,
Tae Joon Park,
**hyun Noh,
Wonil Chung,
Mengwei Si,
Shriram Ramanathan,
Peide D. Ye
Abstract:
Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with a 50 nm fin structure. For high-quality interface between \b{eta}-Ga2O3 and gate dielectric, atomic layer-deposited 15-nm-thick alum…
▽ More
Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with a 50 nm fin structure. For high-quality interface between \b{eta}-Ga2O3 and gate dielectric, atomic layer-deposited 15-nm-thick aluminum oxide (Al2O3) was utilized with Tri-methyl-aluminum (TMA) self-cleaning surface treatment. The fabricated devices demonstrate extremely low subthreshold slope (SS) of 61 mV/dec, high drain current (IDS) ON/OFF ratio of 1.5 X 109, and negligible transfer characteristic hysteresis. We also experimentally demonstrated robustness of these devices with current-voltage (I-V) characteristics measured at temperatures up to 400 °C.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
Why In2O3 Can Make 0.7 nm Atomic Layer Thin Transistors?
Authors:
Mengwei Si,
Yaoqiao Hu,
Zehao Lin,
Xing Sun,
Adam Charnas,
Dongqi Zheng,
Xiao Lyu,
Haiyan Wang,
Kyeongjae Cho,
Peide D. Ye
Abstract:
In this work, we demonstrate enhancement-mode field-effect transistors by atomic-layer-deposited (ALD) amorphous In2O3 channel with thickness down to 0.7 nm. Thickness is found to be critical on the materials and electron transport of In2O3. Controllable thickness of In2O3 at atomic scale enables the design of sufficient 2D carrier density in the In2O3 channel integrated with the conventional diel…
▽ More
In this work, we demonstrate enhancement-mode field-effect transistors by atomic-layer-deposited (ALD) amorphous In2O3 channel with thickness down to 0.7 nm. Thickness is found to be critical on the materials and electron transport of In2O3. Controllable thickness of In2O3 at atomic scale enables the design of sufficient 2D carrier density in the In2O3 channel integrated with the conventional dielectric. The threshold voltage and channel carrier density are found to be considerably tuned by channel thickness. Such phenomenon is understood by the trap neutral level (TNL) model where the Fermi-level tends to align deeply inside the conduction band of In2O3 and can be modulated to the bandgap in atomic layer thin In2O3 due to quantum confinement effect, which is confirmed by density function theory (DFT) calculation. The demonstration of enhancement-mode amorphous In2O3 transistors suggests In2O3 is a competitive channel material for back-end-of-line (BEOL) compatible transistors and monolithic 3D integration applications.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Scaled Atomic-Layer-Deposited Indium Oxide Nanometer Transistors with Maximum Drain Current Exceeding 2 A/mm at Drain Voltage of 0.7 V
Authors:
Mengwei Si,
Zehao Lin,
Adam Charnas,
Peide D. Ye
Abstract:
In this work, we demonstrate scaled back-end-of-line (BEOL) compatible indium oxide (In2O3) transistors by atomic layer deposition (ALD) with channel thickness (Tch) of 1.0-1.5 nm, channel length (Lch) down to 40 nm, and equivalent oxide thickness (EOT) of 2.1 nm, with record high drain current of 2.0 A/mm at VDS of 0.7 V among all oxide semiconductors. Enhancement-mode In2O3 transistors with ID o…
▽ More
In this work, we demonstrate scaled back-end-of-line (BEOL) compatible indium oxide (In2O3) transistors by atomic layer deposition (ALD) with channel thickness (Tch) of 1.0-1.5 nm, channel length (Lch) down to 40 nm, and equivalent oxide thickness (EOT) of 2.1 nm, with record high drain current of 2.0 A/mm at VDS of 0.7 V among all oxide semiconductors. Enhancement-mode In2O3 transistors with ID over 1.0 A/mm at VDS of 1 V are also achieved by controlling the channel thickness down to 1.0 nm at atomic layer scale. Such high current density in a relatively low mobility amorphous oxide semiconductor is understood by the formation of high density 2D channel beyond 4E13 /cm2 at HfO2/In2O3 oxide/oxide interface.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Indium-Tin-Oxide Transistors with One Nanometer Thick Channel and Ferroelectric Gating
Authors:
Mengwei Si,
Joseph Andler,
Xiao Lyu,
Chang Niu,
Suman Datta,
Rakesh Agrawal,
Peide D. Ye
Abstract:
In this work, we demonstrate high performance indium-tin-oxide (ITO) transistors with the channel thickness down to 1 nm and ferroelectric Hf0.5Zr0.5O2 as gate dielectric. On-current of 0.243 A/mm is achieved on sub-micron gate-length ITO transistors with a channel thickness of 1 nm, while it increases to as high as 1.06 A/mm when the channel thickness increases to 2 nm. A raised source/drain stru…
▽ More
In this work, we demonstrate high performance indium-tin-oxide (ITO) transistors with the channel thickness down to 1 nm and ferroelectric Hf0.5Zr0.5O2 as gate dielectric. On-current of 0.243 A/mm is achieved on sub-micron gate-length ITO transistors with a channel thickness of 1 nm, while it increases to as high as 1.06 A/mm when the channel thickness increases to 2 nm. A raised source/drain structure with a thickness of 10 nm is employed, contributing to a low contact resistance of 0.15 Ωmm and a low contact resistivity of 1.1{\times}10-7 Ωcm2. The ITO transistor with a recessed channel and ferroelectric gating demonstrates several advantages over 2D semiconductor transistors and other thin film transistors, including large-area wafer-size nanometer thin film formation, low contact resistance and contact resistivity, atomic thin channel being immunity to short channel effects, large gate modulation of high carrier density by ferroelectric gating, high-quality gate dielectric and passivation formation, and a large bandgap for the low-power back-end-of-line (BEOL) CMOS application.
△ Less
Submitted 22 August, 2020;
originally announced August 2020.
-
Raman Response and Transport Properties of One-Dimensional van der Waals Tellurium Nanowires
Authors:
**g-Kai Qin,
Pai-Ying Liao,
Mengwei Si,
Shiyuan Gao,
Gang Qiu,
Jie Jian,
Qingxiao Wang,
Si-Qi Zhang,
Shouyuan Huang,
Adam Charnas,
Yixiu Wang,
Moon J. Kim,
Wenzhuo Wu,
Xianfan Xu,
Hai-Yan Wang,
Li Yang,
Yoke Khin Yap,
Peide D. Ye
Abstract:
Tellurium can form nanowires of helical atomic chains. Given their unique one-dimensional van der Waals structure, these nanowires are expected to show remarkably different physical and electronic properties than bulk tellurium. Here we show that few-chain and single-chain van der Waals tellurium nanowires can be isolated using carbon nanotube and boron nitride nanotube encapsulation. With the app…
▽ More
Tellurium can form nanowires of helical atomic chains. Given their unique one-dimensional van der Waals structure, these nanowires are expected to show remarkably different physical and electronic properties than bulk tellurium. Here we show that few-chain and single-chain van der Waals tellurium nanowires can be isolated using carbon nanotube and boron nitride nanotube encapsulation. With the approach, the number of atomic chains can be controlled by the inner diameter of the nanotube. The Raman response of the structures suggests that the interaction between a single-atomic tellurium chain and a carbon nanotube is weak, and that the inter-chain interaction becomes stronger as the number of chains increases. Compared with bare tellurium nanowires on SiO2, nanowires encapsulated in boron nitride nanotubes exhibit a dramatically enhanced current-carrying capacity, with a current density of 1.5*10^8 A cm-2, which exceeds that of most semiconducting nanowires. We also use our tellurium nanowires encapsulated in boron nitride nanotubes to create field-effect transistors that have a diameter of only 2 nm.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Ultrafast Photoinduced Band Splitting and Carrier Dynamics in Chiral Tellurium Nanosheets
Authors:
Giriraj Jnawali,
Yuan Xiang,
Samuel M. Linser,
Iraj Abbasian Shojaei,
Ruoxing Wang,
Gang Qiu,
Chao Lian,
Bryan M. Wong,
Wu Wenzhuo,
Peide D. Ye,
Yongsheng Leng,
Howard E. Jackson,
Leigh M. Smith
Abstract:
Trigonal tellurium (Te) is a chiral semiconductor that lacks both mirror and inversion symmetries, resulting in complex band structures with Weyl crossings and unique spin textures. Detailed time-resolved polarized reflectance spectroscopy is used to investigate its band structure and carrier dynamics. The polarized transient spectra reveal optical transitions between the uppermost spin-split H4 a…
▽ More
Trigonal tellurium (Te) is a chiral semiconductor that lacks both mirror and inversion symmetries, resulting in complex band structures with Weyl crossings and unique spin textures. Detailed time-resolved polarized reflectance spectroscopy is used to investigate its band structure and carrier dynamics. The polarized transient spectra reveal optical transitions between the uppermost spin-split H4 and H5 and the degenerate H6 valence bands (VB) and the lowest degenerate H6 conduction band (CB) as well as a higher energy transition at the L-point. Surprisingly, the degeneracy of the H6 CB (a proposed Weyl node) is lifted and the spin-split VB gap is reduced upon photoexcitation before relaxing to equilibrium as the carriers decay. Using ab initio density functional theory (DFT) calculations we conclude that the dynamic band structure is caused by a photoinduced shear strain in the Te film that breaks the screw symmetry of the crystal. The band-edge anisotropy is also reflected in the hot carrier decay rate, which is a factor of two slower along c-axis than perpendicular to it. The majority of photoexcited carriers near the band-edge are seen to recombine within 30 ps while higher lying transitions observed near 1.2 eV appear to have substantially longer lifetimes, potentially due to contributions of intervalley processes in the recombination rate. These new findings shed light on the strong correlation between photoinduced carriers and electronic structure in anisotropic crystals, which opens a potential pathway for designing novel Te-based devices that take advantage of the topological structures as well as strong spin-related properties.
△ Less
Submitted 20 July, 2020; v1 submitted 22 October, 2019;
originally announced October 2019.
-
Gate-tunable Strong Spin-orbit Interaction in Two-dimensional Tellurium Probed by Weak-antilocalization
Authors:
Chang Niu,
Gang Qiu,
Yixiu Wang,
Zhuocheng Zhang,
Mengwei Si,
Wenzhuo Wu,
Peide D. Ye
Abstract:
Tellurium (Te) has attracted great research interest due to its unique crystal structure since 1970s. However, the conduction band of Te is rarely studied experimentally because of the intrinsic p-type nature of Te crystal. By atomic layer deposited dielectric do** technique, we are able to access the conduction band transport properties of Te in a controlled fashion. In this paper, we report on…
▽ More
Tellurium (Te) has attracted great research interest due to its unique crystal structure since 1970s. However, the conduction band of Te is rarely studied experimentally because of the intrinsic p-type nature of Te crystal. By atomic layer deposited dielectric do** technique, we are able to access the conduction band transport properties of Te in a controlled fashion. In this paper, we report on a systematic study of weak-antilocalization (WAL) effect in n-type two-dimensional (2D) Te films. We find that the WAL agrees well with Iordanskii, Lyanda-Geller, and Pikus (ILP) theory. The gate and temperature dependent WAL reveals that Dyakonov-Perel (DP) mechanism is dominant for spin relaxation and phase relaxation is governed by electron-electron (e-e) interaction. Large phase coherence length near 600nm at T=1K is obtained, together with gate tunable spin-orbit interaction (SOI). Transition from weak-localization (WL) to weak-antilocalization (WAL) depending on gate bias is also observed. These results demonstrate that newly developed solution-based synthesized Te films provide a new controllable strong SOI 2D semiconductor with high potential for spintronic applications.
△ Less
Submitted 14 September, 2019;
originally announced September 2019.
-
Quantum Hall Effect of Weyl Fermions in Semiconducting n-type Tellurene
Authors:
Gang Qiu,
Chang Niu,
Yixiu Wang,
Mengwei Si,
Zhuocheng Zhang,
Wenzhuo Wu,
Peide D. Ye
Abstract:
Dirac and Weyl nodal materials can host low-energy relativistic quasiparticles. Under strong magnetic fields, the topological properties of Dirac/Weyl materials can directly manifest through quantum Hall states. However, most Dirac/Weyl nodes generically exist in semimetals without exploitable bandgaps due to their accidental band-crossing origin. Here we report the first experimental observation…
▽ More
Dirac and Weyl nodal materials can host low-energy relativistic quasiparticles. Under strong magnetic fields, the topological properties of Dirac/Weyl materials can directly manifest through quantum Hall states. However, most Dirac/Weyl nodes generically exist in semimetals without exploitable bandgaps due to their accidental band-crossing origin. Here we report the first experimental observation of Weyl fermions in a semiconductor. Tellurene, the 2D form of tellurium, possesses chiral crystal structure which induces unconventional Weyl nodes with a hedgehog-like radial spin texture near the conduction band edge. We synthesize high-quality n-type tellurene by a hydrothermal method with subsequent dielectric do** and detect a topologically non-trivial pi Berry phase in quantum Hall sequences. Our work expands the spectrum of Weyl matter into semiconductors and offers a new platform to design novel quantum devices by marrying the advantages of topological materials to versatile semiconductors.
△ Less
Submitted 26 April, 2020; v1 submitted 29 August, 2019;
originally announced August 2019.
-
A Critical Review of Recent Progress on Negative Capacitance Field-Effect Transistors
Authors:
Muhammad A. Alam,
Mengwei Si,
Peide D. Ye
Abstract:
The elegant simplicity of the device concept and the urgent need for a new "transistor" at the twilight of Moore's law have inspired many researchers in industry and academia to explore the physics and technology of negative capacitance field effect transistor (NC-FET). Although hundreds of papers have been published, the validity of quasi-static NC and the frequency-reliability limits of NC-FET a…
▽ More
The elegant simplicity of the device concept and the urgent need for a new "transistor" at the twilight of Moore's law have inspired many researchers in industry and academia to explore the physics and technology of negative capacitance field effect transistor (NC-FET). Although hundreds of papers have been published, the validity of quasi-static NC and the frequency-reliability limits of NC-FET are still being debated. The concept of NC - if conclusively demonstrated - will have broad impacts on device physics and technology development. Here, the authors provide a critical review of recent progress on NC-FETs research and some starting points for a coherent discussion.
△ Less
Submitted 9 March, 2019;
originally announced March 2019.
-
Room Temperature Electrocaloric Effect in Layered Ferroelectric CuInP2S6 for Solid State Refrigeration
Authors:
Mengwei Si,
Atanu K. Saha,
Pai-Ying Liao,
Shengjie Gao,
Sabine M. Neumayer,
Jie Jian,
**gkai Qin,
Nina Balke,
Haiyan Wang,
Petro Maksymovych,
Wenzhuo Wu,
Sumeet K. Gupta,
Peide D. Ye
Abstract:
A material with reversible temperature change capability under an external electric field, known as the electrocaloric effect (ECE), has long been considered as a promising solid-state cooling solution. However, electrocaloric (EC) performance of EC materials generally is not sufficiently high for real cooling applications. As a result, exploring EC materials with high performance is of great inte…
▽ More
A material with reversible temperature change capability under an external electric field, known as the electrocaloric effect (ECE), has long been considered as a promising solid-state cooling solution. However, electrocaloric (EC) performance of EC materials generally is not sufficiently high for real cooling applications. As a result, exploring EC materials with high performance is of great interest and importance. Here, we report on the ECE of ferroelectric materials with van der Waals layered structure (CuInP2S6 or CIPS in this work in particular). Over 60% polarization charge change is observed within a temperature change of only 10 K at Curie temperature. Large adiabatic temperature change (|ΔT|) of 3.3 K, isothermal entropy change (|ΔS|) of 5.8 J kg-1 K-1 at |ΔE|=142.0 kV cm-1 at 315 K (above and near room temperature) are achieved, with a large EC strength (|ΔT|/|ΔE|) of 29.5 mK cm kV-1. The ECE of CIPS is also investigated theoretically by numerical simulation and a further EC performance projection is provided.
△ Less
Submitted 13 September, 2019; v1 submitted 19 January, 2019;
originally announced January 2019.
-
Thermoelectric Performance of 2D Tellurium with Accumulation Contacts
Authors:
Gang Qiu,
Shouyuan Huang,
Mauricio Segovia,
Prabhu K. Venuthurumilli,
Yixiu Wang,
Wenzhuo Wu,
Xianfan Xu,
Peide D. Ye
Abstract:
Tellurium (Te) is an intrinsically p-type doped narrow bandgap semiconductor with excellent electrical conductivity and low thermal conductivity. Bulk trigonal Te has been theoretically predicted and experimentally demonstrated to be an outstanding thermoelectric material with high value of thermoelectric figure-of-merit ZT. In view of the recent progress in develo** synthesis route of two-dimen…
▽ More
Tellurium (Te) is an intrinsically p-type doped narrow bandgap semiconductor with excellent electrical conductivity and low thermal conductivity. Bulk trigonal Te has been theoretically predicted and experimentally demonstrated to be an outstanding thermoelectric material with high value of thermoelectric figure-of-merit ZT. In view of the recent progress in develo** synthesis route of two-dimensional (2D) tellurium thin films as well as the growing trend of exploiting nanostructures as thermoelectric devices, here for the first time we report excellent thermoelectric performance of tellurium nanofilms, with room temperature power factor of 31.7 μWcm-1K-2 and ZT value of 0.63. To further enhance the efficiency of harvesting thermoelectric power in nanofilm devices, thermoelectrical current map** was performed with a laser as a heating source, and we found high work function metals such as palladium can form rare accumulation-type metal-to-semiconductor contacts to 2D Te, which allows thermoelectrically generated carriers to be collected more efficiently. High-performance thermoelectric 2D Te devices have broad applications as energy harvesting devices or nanoscale Peltier coolers in microsystems.
△ Less
Submitted 26 December, 2018;
originally announced December 2018.
-
On the Ferroelectric Polarization Switching of Hafnium Zirconium Oxide in Ferroelectric/Dielectric Stack
Authors:
Mengwei Si,
Xiao Lyu,
Peide D. Ye
Abstract:
The ferroelectric polarization switching in ferroelectric hafnium zirconium oxide (Hf0.5Zr0.5O2, HZO) in the HZO/Al2O3 ferroelectric/dielectric stack is investigated systematically by capacitance-voltage and polarization-voltage measurements. The thickness of dielectric layer is found to have a determinant impact on the ferroelectric polarization switching of ferroelectric HZO. A suppression of fe…
▽ More
The ferroelectric polarization switching in ferroelectric hafnium zirconium oxide (Hf0.5Zr0.5O2, HZO) in the HZO/Al2O3 ferroelectric/dielectric stack is investigated systematically by capacitance-voltage and polarization-voltage measurements. The thickness of dielectric layer is found to have a determinant impact on the ferroelectric polarization switching of ferroelectric HZO. A suppression of ferroelectricity is observed with thick dielectric layer. In the gate stacks with thin dielectric layers, a full polarization switching of the ferroelectric layer is found possible by the proposed leakage-current-assist mechanism through the ultrathin dielectric layer. Theoretical simulation results agree well with experimental data. This work clarifies some of the critical parts of the long-standing confusions and debating related to negative capacitance field-effect transistors (NC-FETs) concepts and experiments.
△ Less
Submitted 24 June, 2019; v1 submitted 12 December, 2018;
originally announced December 2018.
-
A Ferroelectric Semiconductor Field-Effect Transistor
Authors:
Mengwei Si,
Atanu K. Saha,
Shengjie Gao,
Gang Qiu,
**gkai Qin,
Yuqin Duan,
Jie Jian,
Chang Niu,
Haiyan Wang,
Wenzhuo Wu,
Sumeet K. Gupta,
Peide D. Ye
Abstract:
Ferroelectric field-effect transistors employ a ferroelectric material as a gate insulator, the polarization state of which can be detected using the channel conductance of the device. As a result, the devices are of potential to use in non-volatile memory technology, but suffer from short retention times, which limits their wider application. Here we report a ferroelectric semiconductor field-eff…
▽ More
Ferroelectric field-effect transistors employ a ferroelectric material as a gate insulator, the polarization state of which can be detected using the channel conductance of the device. As a result, the devices are of potential to use in non-volatile memory technology, but suffer from short retention times, which limits their wider application. Here we report a ferroelectric semiconductor field-effect transistor in which a two-dimensional ferroelectric semiconductor, indium selenide (α-In2Se3), is used as the channel material in the device. α-In2Se3 was chosen due to its appropriate bandgap, room temperature ferroelectricity, ability to maintain ferroelectricity down to a few atomic layers, and potential for large-area growth. A passivation method based on the atomic-layer deposition of aluminum oxide (Al2O3) was developed to protect and enhance the performance of the transistors. With 15-nm-thick hafnium oxide (HfO2) as a scaled gate dielectric, the resulting devices offer high performance with a large memory window, a high on/off ratio of over 108, a maximum on-current of 862 μA μm-1, and a low supply voltage.
△ Less
Submitted 9 January, 2020; v1 submitted 7 December, 2018;
originally announced December 2018.
-
Imaging Carrier Inhomogeneities in Ambipolar Tellurene Field Effect Transistors
Authors:
Samuel Berweger,
Gang Qiu,
Yixiu Wang,
Benjamin Pollard,
Kristen L. Genter,
Robert Tyrell-Ead,
T. Mitch Wallis,
Wenzhuo Wu,
Peide D. Ye,
Pavel Kabos
Abstract:
Develo** van der Waals (vdW) homojunction devices requires materials with narrow bandgaps and simultaneously high hole and electron mobilities for bipolar transport, as well as methods to image and study spatial variations in carrier type and associated conductivity with nanometer spatial resolution. Here we demonstrate the general capability of near-field scanning microwave microscopy (SMM) to…
▽ More
Develo** van der Waals (vdW) homojunction devices requires materials with narrow bandgaps and simultaneously high hole and electron mobilities for bipolar transport, as well as methods to image and study spatial variations in carrier type and associated conductivity with nanometer spatial resolution. Here we demonstrate the general capability of near-field scanning microwave microscopy (SMM) to image and study the local carrier type and associated conductivity in operando by studying ambiploar field effect transistors (FETs) of the 1D vdW material tellurium in 2D form. To quantitatively understand electronic variations across the device, we produce nanometer resolved maps of the local carrier equivalence backgate voltage. We show that the global device conductivity minimum determined from transport measurements does not arise from uniform carrier neutrality, but rather from the continued coexistence of p-type regions at the device edge and n-type regions in the interior of our micron-scale devices. This work both underscores and addresses the need to image and understand spatial variations in the electronic properties of nanoscale devices.
△ Less
Submitted 3 November, 2018;
originally announced November 2018.
-
Quantum Transport and Band Structure Evolution under High Magnetic Field in Few-Layer Tellurene
Authors:
Gang Qiu,
Yixiu Wang,
Yifan Nie,
Yong** Zheng,
Kyeongjae Cho,
Wenzhuo Wu,
Peide D. Ye
Abstract:
Quantum Hall effect (QHE) is a macroscopic manifestation of quantized states which only occurs in confined two-dimensional electron gas (2DEG) systems. Experimentally, QHE is hosted in high mobility 2DEG with large external magnetic field at low temperature. Two-dimensional van der Waals materials, such as graphene and black phosphorus, are considered interesting material systems to study quantum…
▽ More
Quantum Hall effect (QHE) is a macroscopic manifestation of quantized states which only occurs in confined two-dimensional electron gas (2DEG) systems. Experimentally, QHE is hosted in high mobility 2DEG with large external magnetic field at low temperature. Two-dimensional van der Waals materials, such as graphene and black phosphorus, are considered interesting material systems to study quantum transport, because it could unveil unique host material properties due to its easy accessibility of monolayer or few-layer thin films at 2D quantum limit. Here for the first time, we report direct observation of QHE in a novel low-dimensional material system: tellurene.High-quality 2D tellurene thin films were acquired from recently reported hydrothermal method with high hole mobility of nearly 3,000 cm2/Vs at low temperatures, which allows the observation of well-developed Shubnikov-de-Haas (SdH) oscillations and QHE. A four-fold degeneracy of Landau levels in SdH oscillations and QHE was revealed. Quantum oscillations were investigated under different gate biases, tilted magnetic fields and various temperatures, and the results manifest the inherent information of the electronic structure of Te. Anomalies in both temperature-dependent oscillation amplitudes and transport characteristics were observed which are ascribed to the interplay between Zeeman effect and spin-orbit coupling as depicted by the density functional theory (DFT) calculations.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
Thermodynamic Studies of \b{eta}-Ga2O3 Nanomembrane Field-Effect Transistors on a Sapphire Substrate
Authors:
Hong Zhou,
Kerry Maize,
**hyun Noh,
Ali Shakouri,
Peide D. Ye
Abstract:
The self-heating effect is a severe issue for high-power semiconductor devices, which degrades the electron mobility and saturation velocity, and also affects the device reliability. On applying an ultrafast and high-resolution thermoreflectance imaging technique, the direct self-heating effect and surface temperature increase phenomenon are observed on novel top-gate \b{eta}-Ga2O3 on insulator fi…
▽ More
The self-heating effect is a severe issue for high-power semiconductor devices, which degrades the electron mobility and saturation velocity, and also affects the device reliability. On applying an ultrafast and high-resolution thermoreflectance imaging technique, the direct self-heating effect and surface temperature increase phenomenon are observed on novel top-gate \b{eta}-Ga2O3 on insulator field-effect transistors. Here, we demonstrate that by utilizing a higher thermal conductivity sapphire substrate rather than a SiO2/Si substrate, the temperature rise above room temperature of \b{eta}-Ga2O3 on the insulator field-effect transistor can be reduced by a factor of 3 and thereby the self-heating effect is significantly reduced. Both thermoreflectance characterization and simulation verify that the thermal resistance on the sapphire substrate is less than 1/3 of that on the SiO2/Si substrate. Therefore, maximum drain current density of 535 mA/mm is achieved on the sapphire substrate, which is 70% higher than that on the SiO2/Si substrate due to reduced self-heating. Integration of \b{eta}-Ga2O3 channel on a higher thermal conductivity substrate opens a new route to address the low thermal conductivity issue of \b{eta}-Ga2O3 for power electronics applications.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Controlled Growth of a Large-Size 2D Selenium Nanosheet and Its Electronic and Optoelectronic Applications
Authors:
**gkai Qin,
Gang Qiu,
Jie Jian,
Hong Zhou,
Lingming Yang,
Adam Charnas,
Dmitry Y Zemlyanov,
Cheng-Yan Xu,
Xianfan Xu,
Wenzhuo Wu,
Haiyan Wang,
Peide D Ye
Abstract:
Selenium has attracted intensive attention as a promising material candidate for future optoelectronic applications. However, selenium has a strong tendency to grow into nanowire forms due to its anisotropic atomic structure, which has largely hindered the exploration of its potential applications. In this work, using a physical vapor deposition method, we have demonstrated the synthesis of large-…
▽ More
Selenium has attracted intensive attention as a promising material candidate for future optoelectronic applications. However, selenium has a strong tendency to grow into nanowire forms due to its anisotropic atomic structure, which has largely hindered the exploration of its potential applications. In this work, using a physical vapor deposition method, we have demonstrated the synthesis of large-size, high-quality 2D selenium nanosheets, the minimum thickness of which could be as thin as 5 nm. The Se nanosheet exhibits a strong in-plane anisotropic property, which is determined by angle-resolved Raman spectroscopy. Back-gating field-effect transistors based on a Se nanosheet exhibit p-type transport behaviors with on-state current density around 20 mA/mm at Vds = 3 V. Four-terminal field effect devices are also fabricated to evaluate the intrinsic hole mobility of the selenium nanosheet, and the value is determined to be 0.26 cm2 Vs at 300 K. The selenium nanosheet phototransistors show an excellent photoresponsivity of up to 263 A/W, with a rise time of 0.1 s and fall time of 0.12 s. These results suggest that crystal selenium as a 2D form of a 1D van der Waals solid opens up the possibility to explore device applications.
△ Less
Submitted 2 November, 2017;
originally announced November 2017.
-
$β$-Ga$_2$O$_3$ Nano-membrane Negative Capacitance Field-effect Transistor with Steep Subthreshold Slope for Wide Bandgap Logic Applications
Authors:
Mengwei Si,
Lingming Yang,
Hong Zhou,
Peide D. Ye
Abstract:
Steep-slope $β$-Ga$_2$O$_3$ nano-membrane negative capacitance field-effect transistors (NC-FETs) are demonstrated with ferroelectric hafnium zirconium oxide in gate dielectric stack. Subthreshold slope less than 60 mV/dec at room temperature is obtained for both forward and reverse gate voltage sweeps with a minimum value of 34.3 mV/dec at reverse gate voltage sweep and 53.1 mV/dec at forward gat…
▽ More
Steep-slope $β$-Ga$_2$O$_3$ nano-membrane negative capacitance field-effect transistors (NC-FETs) are demonstrated with ferroelectric hafnium zirconium oxide in gate dielectric stack. Subthreshold slope less than 60 mV/dec at room temperature is obtained for both forward and reverse gate voltage sweeps with a minimum value of 34.3 mV/dec at reverse gate voltage sweep and 53.1 mV/dec at forward gate voltage sweep at $V_{DS}$=0.5 V. Enhancement-mode operation with threshold voltage ~0.4 V is achieved by tuning the thickness of $β$-Ga$_2$O$_3$ membrane. Low hysteresis of less than 0.1 V is obtained. The steep-slope, low hysteresis and enhancement-mode $β$-Ga$_2$O$_3$ NC-FETs are promising as nFET candidate for future wide bandgap CMOS logic applications.
△ Less
Submitted 2 November, 2017;
originally announced November 2017.
-
1D van der Waals Material Tellurium: Raman Spectroscopy under Strain and Magneto-transport
Authors:
Yuchen Du,
Gang Qiu,
Yixiu Wang,
Mengwei Si,
Xianfan Xu,
Wenzhuo Wu,
Peide D. Ye
Abstract:
Experimental demonstrations of 1D van der Waals material tellurium have been presented by Raman spectroscopy under strain and magneto-transport. Raman spectroscopy measurements have been performed under strains along different principle axes. Pronounced strain response along c-axis is observed due to the strong intra-chain covalent bonds, while no strain response is obtained along a-axis due to th…
▽ More
Experimental demonstrations of 1D van der Waals material tellurium have been presented by Raman spectroscopy under strain and magneto-transport. Raman spectroscopy measurements have been performed under strains along different principle axes. Pronounced strain response along c-axis is observed due to the strong intra-chain covalent bonds, while no strain response is obtained along a-axis due to the weak inter-chain van der Waals interaction. Magneto-transport results further verify its anisotropic property, resulting in dramatically distinct magneto-resistance behaviors in terms of three different magnetic field directions. Specifically, phase coherence length extracted from weak antilocalization effect, L$_Φ$ ~ T$^{-0.5}$, claims its 2D transport characteristics when an applied magnetic field is perpendicular to the thin film. In contrast, L$_Φ$ ~ T$^{-0.33}$ is obtained from universal conductance fluctuations once the magnetic field is along c-axis of Te, indicating its nature of 1D transport along the helical atomic chains. Our studies, which are obtained on high quality single crystal tellurium thin film, appear to serve as strong evidences of its 1D van der Waals structure from experimental perspectives. It is the aim of this paper to address this special concept that differs from the previous well-studied 1D nanowires or 2D van der Waals materials.
△ Less
Submitted 23 April, 2017;
originally announced April 2017.
-
Steep-slope Hysteresis-free Negative Capacitance MoS2 Transistors
Authors:
Mengwei Si,
Chun-Jung Su,
Chunsheng Jiang,
Nathan J. Conrad,
Hong Zhou,
Kerry D. Maize,
Gang Qiu,
Chien-Ting Wu,
Ali Shakouri,
Muhammad A. Alam,
Peide D. Ye
Abstract:
The so-called Boltzmann Tyranny defines the fundamental thermionic limit of the subthreshold slope (SS) of a metal-oxide-semiconductor field-effect transistor (MOSFET) at 60 mV/dec at room temperature and, therefore, precludes the lowering of the supply voltage and the overall power consumption. Adding a ferroelectric negative capacitor to the gate stack of a MOSFET may offer a promising solution…
▽ More
The so-called Boltzmann Tyranny defines the fundamental thermionic limit of the subthreshold slope (SS) of a metal-oxide-semiconductor field-effect transistor (MOSFET) at 60 mV/dec at room temperature and, therefore, precludes the lowering of the supply voltage and the overall power consumption. Adding a ferroelectric negative capacitor to the gate stack of a MOSFET may offer a promising solution to bypassing this fundamental barrier. Meanwhile, two-dimensional (2D) semiconductors, such as atomically thin transition metal dichalcogenides (TMDs) due to their low dielectric constant, and ease of integration in a junctionless transistor topology, offer enhanced electrostatic control of the channel. Here, we combine these two advantages and demonstrate for the first time a molybdenum disulfide (MoS2) 2D steep slope transistor with a ferroelectric hafnium zirconium oxide layer (HZO) in the gate dielectric stack. This device exhibits excellent performance in both on- and off-states, with maximum drain current of 510 μA/μm, sub-thermionic subthreshold slope and is essentially hysteresis-free. Negative differential resistance (NDR) was observed at room temperature in the MoS2 negative capacitance field-effect-transistors (NC-FETs) as the result of negative capacitance due to the negative drain-induced-barrier-lowering (DIBL). High on-current induced self-heating effect was also observed and studied.
△ Less
Submitted 29 January, 2018; v1 submitted 22 April, 2017;
originally announced April 2017.
-
Field-effect transistors made from solution-grown two-dimensional tellurene
Authors:
Yixiu Wang,
Gang Qiu,
Ruoxing Wang,
Shouyuan Huang,
Qingxiao Wang,
Yuanyue Liu,
Yuchen Du,
William A. Goddard III,
Moon J. Kim,
Xianfan Xu,
Peide D. Ye,
Wenzhuo Wu
Abstract:
The reliable production of two-dimensional crystals is essential for the development of new technologies based on 2D materials. However, current synthesis methods suffer from a variety of drawbacks, including limitations in crystal size and stability. Here, we report the fabrication of large-area, high-quality 2D tellurium (tellurene) using a substrate-free solution process. Our approach can creat…
▽ More
The reliable production of two-dimensional crystals is essential for the development of new technologies based on 2D materials. However, current synthesis methods suffer from a variety of drawbacks, including limitations in crystal size and stability. Here, we report the fabrication of large-area, high-quality 2D tellurium (tellurene) using a substrate-free solution process. Our approach can create crystals with a process-tunable thickness, from monolayer to tens of nanometres, and with lateral sizes of up to 100 um. The chiral-chain van der Waals structure of tellurene gives rise to strong in-plane anisotropic properties and large thickness dependent shifts in Raman vibrational modes, which is not observed in other 2D layered materials. We also fabricate tellurene field-effect transistors, which exhibit air-stable performance at room temperature for over two months, on off ratios on the order of 106 and field-effect mobilities of around 700 cm2 per Vs. Furthermore, by scaling down the channel length and integrating with high-k dielectrics, transistors with a significant on-state current density of 1 A mm-1 are demonstrated.
△ Less
Submitted 24 April, 2018; v1 submitted 20 April, 2017;
originally announced April 2017.
-
\b{eta}-Ga2O3 on Insulator Field-effect Transistors with Drain Currents Exceeding 1.5 A/mm and Their Self-heating Effect
Authors:
Hong Zhou,
Kerry Maize,
Gang Qiu,
Ali Shakouri,
Peide D. Ye
Abstract:
We have demonstrated that depletion/enhancement-mode b-Ga2O3 on insulator field-effect transistors can achieve a record high drain current density of 1.5/1.0 A/mm by utilizing a highly doped b-Ga2O3 nano-membrane as the channel. b-Ga2O3 on insulator field-effect transistor (GOOI FET) shows a high on/off ratio of 1010 and low subthreshold slope of 150 mV/dec even with 300 nm thick SiO2. The enhance…
▽ More
We have demonstrated that depletion/enhancement-mode b-Ga2O3 on insulator field-effect transistors can achieve a record high drain current density of 1.5/1.0 A/mm by utilizing a highly doped b-Ga2O3 nano-membrane as the channel. b-Ga2O3 on insulator field-effect transistor (GOOI FET) shows a high on/off ratio of 1010 and low subthreshold slope of 150 mV/dec even with 300 nm thick SiO2. The enhancement-mode GOOI FET is achieved through surface depletion. An ultra-fast, high resolution thermo-reflectance imaging technique is applied to study the self-heating effect by directly measuring the local surface temperature. High drain current, low Rc, and wide bandgap make the b-Ga2O3 on insulator field-effect transistor a promising candidate for future power electronics applications.
△ Less
Submitted 9 November, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
High Performance Depletion/Enhancement-Mode beta-Ga2O3 on Insulator (GOOI) Field-effect Transistors with Record Drain Currents of 600/450 mA/mm
Authors:
Hong Zhou,
Mengwei Si,
Sami Alghmadi,
Gang Qiu,
Lingming Yang,
Peide D. Ye
Abstract:
In this letter, we report on high performance depletion/enhancement (D/E)-mode beta-Ga2O3 on insulator (GOOI) field-effect transistors (FETs) with record high drain currents (ID) of 600/450 mA/mm, which are nearly one order of magnitude higher than any other reported ID values. The threshold voltage (VT) can be modulated by varying the thickness of the beta-Ga2O3 films and the E-mode GOOI FET can…
▽ More
In this letter, we report on high performance depletion/enhancement (D/E)-mode beta-Ga2O3 on insulator (GOOI) field-effect transistors (FETs) with record high drain currents (ID) of 600/450 mA/mm, which are nearly one order of magnitude higher than any other reported ID values. The threshold voltage (VT) can be modulated by varying the thickness of the beta-Ga2O3 films and the E-mode GOOI FET can be simply achieved by shrinking the beta-Ga2O3 film thickness. Benefiting from the good interface between beta-Ga2O3 and SiO2 and wide bandgap of beta-Ga2O3, a negligible transfer characteristic hysteresis, high ID on/off ratio of 10^10, and low subthreshold swing of 140 mV/dec for a 300 nm thick SiO2 are observed. E-mode GOOI FET with source to drain spacing of 0.9 um demonstrates a breakdown voltage of 185 V and an average electric field (E) of 2 MV/cm, showing the great promise of GOOI FET for future power devices.
△ Less
Submitted 6 February, 2018; v1 submitted 16 December, 2016;
originally announced December 2016.
-
Performance Enhancement of Black Phosphorus Field-Effect Transistors by Chemical Do**
Authors:
Yuchen Du,
Lingming Yang,
Hong Zhou,
Peide D. Ye
Abstract:
In this letter, a new approach to chemically dope black phosphorus (BP) is presented, which significantly enhances the device performance of BP field-effect transistors for an initial period of 18 h, before degrading to previously reported levels. By applying 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), low ON-state resistance of 3.2 ohm.mm and high field-effect mobility of 229…
▽ More
In this letter, a new approach to chemically dope black phosphorus (BP) is presented, which significantly enhances the device performance of BP field-effect transistors for an initial period of 18 h, before degrading to previously reported levels. By applying 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), low ON-state resistance of 3.2 ohm.mm and high field-effect mobility of 229 cm2/Vs are achieved with a record high drain current of 532 mA/mm at a moderate channel length of 1.5 μm.
△ Less
Submitted 19 July, 2016;
originally announced July 2016.
-
Auxetic Black Phosphorus: A 2D Material with Negative Poisson's Ratio
Authors:
Yuchen Du,
Jesse Maassen,
Wangran Wu,
Zhe Luo,
Xianfan Xu,
Peide D. Ye
Abstract:
The Poisson's ratio of a material characterizes its response to uniaxial strain. Materials normally possess a positive Poisson's ratio - they contract laterally when stretched, and expand laterally when compressed. A negative Poisson's ratio is theoretically permissible but has not, with few exceptions of man-made bulk structures, been experimentally observed in any natural materials. Here, we sho…
▽ More
The Poisson's ratio of a material characterizes its response to uniaxial strain. Materials normally possess a positive Poisson's ratio - they contract laterally when stretched, and expand laterally when compressed. A negative Poisson's ratio is theoretically permissible but has not, with few exceptions of man-made bulk structures, been experimentally observed in any natural materials. Here, we show that the negative Poisson's ratio exists in the low-dimensional natural material black phosphorus, and that our experimental observations are consistent with first principles simulations. Through application of uniaxial strain along zigzag and armchair directions, we find that both interlayer and intralayer negative Poisson's ratios can be obtained in black phosphorus. The phenomenon originates from the puckered structure of its in-plane lattice, together with coupled hinge-like bonding configurations.
△ Less
Submitted 2 July, 2016;
originally announced July 2016.
-
Observation of Optical and Electrical In-plane Anisotropy in High-mobility Few-layer ZrTe5
Authors:
Gang Qiu,
Yuchen Du,
Adam Charnas,
Hong Zhou,
Shengyu **,
Zhe Luo,
Dmitry Zemlyanov,
Xianfan Xu,
Gary Cheng,
Peide D. Ye
Abstract:
Transition metal pentatelluride ZrTe5 is a versatile material in condensed-matter physics and has been intensively studied since the 1980s. The most fascinating feature of ZrTe5 is that it is a 3D Dirac semimetal which has linear energy dispersion in all three dimensions in momentum space. Structure-wise, ZrTe5 is a layered material held together by weak interlayer van der Waals force. The combina…
▽ More
Transition metal pentatelluride ZrTe5 is a versatile material in condensed-matter physics and has been intensively studied since the 1980s. The most fascinating feature of ZrTe5 is that it is a 3D Dirac semimetal which has linear energy dispersion in all three dimensions in momentum space. Structure-wise, ZrTe5 is a layered material held together by weak interlayer van der Waals force. The combination of its unique band structure and 2D atomic structure provides a fertile ground for more potential exotic physical phenomena in ZrTe5 related to 3D Dirac semimentals. However the physical properties of its few-layer form have yet to be thoroughly explored. Here we report strong optical and electrical in-plane anisotropy of mechanically exfoliated few-layer ZrTe5. Raman spectroscopy shows significant intensity change with sample orientations, and the behavior of angle-resolved phonon modes at the gamma point is explained by theoretical calculation. DC conductance measurement indicates a 50% of difference along different in-plane directions. The diminishing of resistivity anomaly in few-layer samples indicates the evolution of band structure with reduced thickness. Low-temperature Hall experiment sheds lights on more intrinsic anisotropic electrical transport, with hole mobility of 3,000 and 1,500 cm2/Vs along a-axis and c-axis respectively. Pronounced quantum oscillations in magneto-resistance are observed at low temperatures with highest electron mobility up to 44,000 cm2/Vs.
△ Less
Submitted 30 November, 2016; v1 submitted 25 June, 2016;
originally announced June 2016.
-
Weak Localization in Few-Layer Black Phosphorus
Authors:
Yuchen Du,
Adam T. Neal,
Hong Zhou,
Peide D. Ye
Abstract:
We have conducted a comprehensive investigation into the magneto-transport properties of few-layer black phosphorus in terms of phase coherence length, phase coherence time, and mobility via weak localization measurement and Hall-effect measurement. We present magnetoresistance data showing the weak localization effect in bare p-type few-layer black phosphorus and reveal its strong dependence on t…
▽ More
We have conducted a comprehensive investigation into the magneto-transport properties of few-layer black phosphorus in terms of phase coherence length, phase coherence time, and mobility via weak localization measurement and Hall-effect measurement. We present magnetoresistance data showing the weak localization effect in bare p-type few-layer black phosphorus and reveal its strong dependence on temperature and carrier concentration. The measured weak localization agrees well with the Hikami-Larkin-Nagaoka model and the extracted phase coherence length of 104 nm at 350 mK, decreasing as ~T^-0.51+-0.05 with increased temperature. Weak localization measurement allows us to qualitatively probe the temperature-dependent phase coherence time τ, which is in agreement with the theory of carrier interaction in the diffusive regime. We also observe the universal conductance fluctuation phenomenon in few-layer black phosphorus within moderate magnetic field and low temperature regime.
△ Less
Submitted 10 February, 2016;
originally announced February 2016.
-
Towards High-Performance Two-Dimensional Black Phosphorus Optoelectronic Devices: the Role of Metal Contacts
Authors:
Yexin Deng,
Nathan J. Conrad,
Zhe Luo,
Han Liu,
Xianfan Xu,
Peide D. Ye
Abstract:
The metal contacts on 2D black phosphorus field-effect transistor and photodetectors are studied. The metal work functions can significantly impact the Schottky barrier at the metal-semiconductor contact in black phosphorus devices. Higher metal work functions lead to larger output hole currents in p-type transistors, while ambipolar characteristics can be observed with lower work function metals.…
▽ More
The metal contacts on 2D black phosphorus field-effect transistor and photodetectors are studied. The metal work functions can significantly impact the Schottky barrier at the metal-semiconductor contact in black phosphorus devices. Higher metal work functions lead to larger output hole currents in p-type transistors, while ambipolar characteristics can be observed with lower work function metals. Photodetectors with record high photoresponsivity (223 mA/W) are demonstrated on black phosphorus through contact-engineering.
△ Less
Submitted 25 March, 2015;
originally announced March 2015.
-
Anisotropic in-plane thermal conductivity observed in few-layer black phosphorus
Authors:
Zhe Luo,
Jesse Maassen,
Yexin Deng,
Yuchen Du,
Richard P. Garrelts,
Mark S. Lundstrom,
Peide D. Ye,
Xianfan Xu
Abstract:
Black phosphorus has been revisited recently as a new two-dimensional material showing potential applications in electronics and optoelectronics. Here we report the anisotropic in-plane thermal conductivity of suspended few-layer black phosphorus measured by micro-Raman spectroscopy. The armchair and zigzag thermal conductivities are ~20 and ~40 W m$^{-1}$ K$^{-1}$ for black phosphorus films thick…
▽ More
Black phosphorus has been revisited recently as a new two-dimensional material showing potential applications in electronics and optoelectronics. Here we report the anisotropic in-plane thermal conductivity of suspended few-layer black phosphorus measured by micro-Raman spectroscopy. The armchair and zigzag thermal conductivities are ~20 and ~40 W m$^{-1}$ K$^{-1}$ for black phosphorus films thicker than 15 nm, respectively, and decrease to ~10 and ~20 W m$^{-1}$ K$^{-1}$ as the film thickness is reduced, exhibiting significant anisotropy. The thermal conductivity anisotropic ratio is found to be ~2 for thick black phosphorus films and drops to ~1.5 for the thinnest 9.5-nm-thick film. Theoretical modeling reveals that the observed anisotropy is primarily related to the anisotropic phonon dispersion, whereas the intrinsic phonon scattering rates are found to be similar along the armchair and zigzag directions. Surface scattering in the black phosphorus films is shown to strongly suppress the contribution of long-mean-free-path acoustic phonons.
△ Less
Submitted 26 August, 2015; v1 submitted 20 March, 2015;
originally announced March 2015.
-
Semiconducting Black Phosphorus: Synthesis, Transport Properties and Electronic Applications
Authors:
Han Liu,
Yuchen Du,
Yexin Deng,
Peide D. Ye
Abstract:
Phosphorus is one of the most abundant elements preserved in earth, constructing with a fraction of ~0.1% of the earth crust. In general, phosphorus has several allotropes. The two most commonly seen allotropes, white and red phosphorus, are widely used in explosives and safety matches. In addition, black phosphorus, though rarely mentioned, is a layered semiconductor and have great potentials in…
▽ More
Phosphorus is one of the most abundant elements preserved in earth, constructing with a fraction of ~0.1% of the earth crust. In general, phosphorus has several allotropes. The two most commonly seen allotropes, white and red phosphorus, are widely used in explosives and safety matches. In addition, black phosphorus, though rarely mentioned, is a layered semiconductor and have great potentials in optical and electronic applications. Remarkably, this layered material can be reduced to one single atomic layer in the vertical direction owing to the van der Waals structure, known as phosphorene, where the physical properties can be tremendously different from its bulk counterpart. In this review article, we trace back to the 100 years research history on black phosphorus from the synthesis to material properties, and extend the topic from black phosphorus to phosphorene. The physical and transport properties are highlighted, aiming at further applications in electronic and optoelectronics devices.
△ Less
Submitted 31 October, 2014;
originally announced November 2014.
-
Contact Research Strategy for Emerging Molybdenum Disulfide and Other Two-Dimensional Field-effect Transistors
Authors:
Yuchen Du,
Lingming Yang,
Han Liu,
Peide D. Ye
Abstract:
Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for future thin film technology due to their high mobility and the exhibiting bandgaps. While many TMD filed-effect transistors (FETs) have been widely demonstrate…
▽ More
Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for future thin film technology due to their high mobility and the exhibiting bandgaps. While many TMD filed-effect transistors (FETs) have been widely demonstrated along with a significant progress to clearly understand the device physics, large contact resistance at metal/semiconductor interface still remain a challenge. From 2D device research point of view, how to minimize the Schottky barrier effects on contacts thus reduce the contact resistance of metals on 2D materials is very critical for the further development of the field. Here, we present a review of contact research on molybdenum disulfide and other TMD FETs from the fundamental understanding of metal-semiconductor interfaces on 2D materials. A clear contact research strategy on 2D semiconducting materials is developed for future high-performance 2D FETs with aggressively scaled dimensions.
△ Less
Submitted 29 October, 2014;
originally announced October 2014.
-
Chloride Molecular Do** Technique on 2D Materials: WS2 and MoS2
Authors:
Lingming Yang,
Kausik Majumdar,
Han Liu,
Yuchen Du,
Heng Wu,
Michael Hatzistergos,
P. Y. Hung,
Robert Tieckelmann,
Wilman Tsai,
Chris Hobbs,
Peide D. Ye
Abstract:
Low-resistivity metal-semiconductor (M-S) contact is one of the urgent challenges in the research of 2D transition metal dichalcogenides (TMDs). Here, we report a chloride molecular do** technique which greatly reduces the contact resistance (Rc) in the few-layer WS2 and MoS2. After do**, the Rc of WS2 and MoS2 have been decreased to 0.7 kohm*um and 0.5 kohm*um, respectively. The significant r…
▽ More
Low-resistivity metal-semiconductor (M-S) contact is one of the urgent challenges in the research of 2D transition metal dichalcogenides (TMDs). Here, we report a chloride molecular do** technique which greatly reduces the contact resistance (Rc) in the few-layer WS2 and MoS2. After do**, the Rc of WS2 and MoS2 have been decreased to 0.7 kohm*um and 0.5 kohm*um, respectively. The significant reduction of the Rc is attributed to the achieved high electron do** density thus significant reduction of Schottky barrier width. As a proof-ofconcept, high-performance few-layer WS2 field-effect transistors (FETs) are demonstrated, exhibiting a high drain current of 380 uA/um, an on/off ratio of 4*106, and a peak field-effect mobility of 60 cm2/V*s. This do** technique provides a highly viable route to diminish the Rc in TMDs, paving the way for high-performance 2D nano-electronic devices.
△ Less
Submitted 9 October, 2014;
originally announced October 2014.
-
Temporal and Thermal Stability of Al2O3-passivated Phosphorene MOSFETs
Authors:
Xi Luo,
Yaghoob Rahbarihagh,
James C. M. Hwang,
Han Liu,
Yuchen Du,
Peide D. Ye
Abstract:
This letter evaluates temporal and thermal stability of a state-of-the-art few-layer phosphorene MOSFET with Al2O3 surface passivation and Ti/Au top gate. As fabricated, the phosphorene MOSFET was stable in atmosphere for at least 100 h. With annealing at 200°C in dry nitrogen for 1 h, its drain current increased by an order of magnitude to approximately 100 mA/mm, which could be attributed to the…
▽ More
This letter evaluates temporal and thermal stability of a state-of-the-art few-layer phosphorene MOSFET with Al2O3 surface passivation and Ti/Au top gate. As fabricated, the phosphorene MOSFET was stable in atmosphere for at least 100 h. With annealing at 200°C in dry nitrogen for 1 h, its drain current increased by an order of magnitude to approximately 100 mA/mm, which could be attributed to the reduction of trapped charge in Al2O3 and/or Schottky barrier at the source and drain contacts. Thereafter, the drain current was stable between -50°C and 150°C up to at least 1000 h. These promising results suggest that environmental protection of phosphorene should not be a major concern, and passivation of phosphorene should focus on its effect on electronic control and transport as in conventional silicon MOSFETs. With cutoff frequencies approaching the gigahertz range, the present phosphorene MOSFET, although far from being optimized, can meet the frequency and stability requirements of most flexible electronics for which phosphorene is intrinsically advantageous due to its corrugated lattice structure.
△ Less
Submitted 3 October, 2014;
originally announced October 2014.
-
Device Perspective for Black Phosphorus Field-Effect Transistors: Contact Resistance, Ambipolar and Scaling
Authors:
Yuchen Du,
Han Liu,
Yexin Deng,
Peide D. Ye
Abstract:
Although monolayer black phosphorus (BP) or phosphorene has been successfully exfoliated and its optical properties have been explored, most of electrical performance of the devices is demonstrated on few-layer phosphorene and ultra-thin BP films. In this paper, we study the channel length scaling of ultra-thin BP field-effect transistors (FETs), and discuss a scheme for using various contact meta…
▽ More
Although monolayer black phosphorus (BP) or phosphorene has been successfully exfoliated and its optical properties have been explored, most of electrical performance of the devices is demonstrated on few-layer phosphorene and ultra-thin BP films. In this paper, we study the channel length scaling of ultra-thin BP field-effect transistors (FETs), and discuss a scheme for using various contact metals to change transistor characteristics. Through studying transistor behaviors with various channel lengths, the contact resistance can be extracted from the transfer length method (TLM). With different contact metals, we find out that the metal/BP interface has different Schottky barrier heights, leading to a significant difference in contact resistance, which is quite different from previous studies of transition metal dichalcogenides (TMDs) such as MoS2 where Fermi-level is strongly pinned near conduction band edge at metal/MoS2 interface. The nature of BP transistors are Schottky barrier FETs, where the on and off states are controlled by tuning the Schottky barriers at the two contacts. We also observe the ambipolar characteristics of BP transistors with enhanced n-type drain current and demonstrate that the p-type carriers can be easily shifted to n-type or vice versus by controlling the gate bias and drain bias, showing the potential to realize BP CMOS logic circuits.
△ Less
Submitted 29 October, 2014; v1 submitted 19 August, 2014;
originally announced August 2014.
-
Two-Dimensional TaSe2 Metallic Crystals: Spin-Orbit Scattering Length and Breakdown Current Density
Authors:
Adam T. Neal,
Yuchen Du,
Han Liu,
Peide D. Ye
Abstract:
We have determined the spin-orbit scattering length of two-dimensional layered 2H-TaSe2 metallic crystals by detailed characterization of the weak anti-localization phenomena in this strong spin-orbit interaction material. By fitting the observed magneto-conductivity, the spin-orbit scattering length for 2H-TaSe2 is determined to be 17 nm in the few-layer films. This small spin-orbit scattering le…
▽ More
We have determined the spin-orbit scattering length of two-dimensional layered 2H-TaSe2 metallic crystals by detailed characterization of the weak anti-localization phenomena in this strong spin-orbit interaction material. By fitting the observed magneto-conductivity, the spin-orbit scattering length for 2H-TaSe2 is determined to be 17 nm in the few-layer films. This small spin-orbit scattering length is comparable to that of Pt, which is widely used to study the spin Hall effect, and indicates the potential of TaSe2 for use in spin Hall effect devices. In addition to strong spin-orbit coupling, a material must also support large charge currents to achieve spin-transfer-torque via the spin Hall effect. Therefore, we have characterized the room temperature breakdown current density of TaSe2 in air, where the best breakdown current density reaches 3.7$\times$10$^7$ A/cm$^2$. This large breakdown current further indicates the potential of TaSe2 for use in spin-torque devices and two-dimensional device interconnect applications.
△ Less
Submitted 16 August, 2014;
originally announced August 2014.
-
Black Phosphorus-Monolayer MoS2 van der Waals Heterojunction P-N Diode
Authors:
Yexin Deng,
Zhe Luo,
Nathan J. Conrad,
Han Liu,
Yongji Gong,
Sina Najmaei,
Pulickel M. Ajayan,
Jun Lou,
Xianfan Xu,
Peide D. Ye
Abstract:
Phosphorene, an elemental 2D material, which is the monolayer of black phosphorus, has been mechanically exfoliated recently. In its bulk form, black phosphorus shows high carrier mobility (~10000 cm2/Vs) and a ~0.3 eV direct bandgap. Well-behaved p-type field-effect transistors with mobilities of up to 1000 cm2/Vs, as well as phototransistors, have been demonstrated on few-layer black phosphorus,…
▽ More
Phosphorene, an elemental 2D material, which is the monolayer of black phosphorus, has been mechanically exfoliated recently. In its bulk form, black phosphorus shows high carrier mobility (~10000 cm2/Vs) and a ~0.3 eV direct bandgap. Well-behaved p-type field-effect transistors with mobilities of up to 1000 cm2/Vs, as well as phototransistors, have been demonstrated on few-layer black phosphorus, showing its promise for electronics and optoelectronics applications due to its high hole mobility and thickness-dependence direct bandgap. However, p-n junctions, the basic building blocks of modern electronic and optoelectronic devices, have not yet been realized based on black phosphorus. In this paper, we demonstrate a gate tunable p-n diode based on a p-type black phosphorus/n-type monolayer MoS2 van der Waals p-n heterojunction. Upon illumination, these ultra-thin p-n diodes show a maximum photodetection responsivity of 418 mA/W at the wavelength of 633 nm, and photovoltaic energy conversion with an external quantum efficiency of 0.3%. These p-n diodes show promise for broadband photodetection and solar energy harvesting.
△ Less
Submitted 13 July, 2014;
originally announced July 2014.
-
High-Performance MoS2 Field-Effect Transistors Enabled by Chloride Do**: Record Low Contact Resistance (0.5 kohm*um) and Record High Drain Current (460 uA/um)
Authors:
Lingming Yang,
Kausik Majumdar,
Yuchen Du,
Han Liu,
Heng Wu,
Michael Hatzistergos,
Py Hung,
Robert Tieckelmann,
Wilman Tsai,
Chris Hobbs,
Peide D. Ye
Abstract:
In this paper, we report a novel chemical do** technique to reduce the contact resistance (Rc) of transition metal dichalcogenides (TMDs) - eliminating two major roadblocks (namely, do** and high Rc) towards demonstration of high-performance TMDs field-effect transistors (FETs). By using 1,2 dichloroethane (DCE) as the do** reagent, we demonstrate an active n-type do** density > 2*1019 cm-…
▽ More
In this paper, we report a novel chemical do** technique to reduce the contact resistance (Rc) of transition metal dichalcogenides (TMDs) - eliminating two major roadblocks (namely, do** and high Rc) towards demonstration of high-performance TMDs field-effect transistors (FETs). By using 1,2 dichloroethane (DCE) as the do** reagent, we demonstrate an active n-type do** density > 2*1019 cm-3 in a few-layer MoS2 film. This enabled us to reduce the Rc value to a record low number of 0.5 kohm*um, which is ~10x lower than the control sample without do**. The corresponding specific contact resistivity (pc) is found to decrease by two orders of magnitude. With such low Rc, we demonstrate 100 nm channel length (Lch) MoS2 FET with a drain current (Ids) of 460 uA/um at Vds = 1.6 V, which is twice the best value reported so far on MoS2 FETs.
△ Less
Submitted 17 June, 2014;
originally announced June 2014.
-
The Effect of Dielectric Cap** on Few-Layer Phosphorene Transistors: Tuning the Schottky Barrier Heights
Authors:
Han Liu,
Adam T. Neal,
Mengwei Si,
Yuchen Du,
Peide D. Ye
Abstract:
Phosphorene is a unique single elemental semiconductor with two-dimensional layered structures. In this letter, we study the transistor behavior on mechanically exfoliated few-layer phosphorene with the top-gate. We achieve a high on-current of 144 mA/mm and hole mobility of 95.6 cm2/Vs. We deposit Al2O3 by atomic layer deposition (ALD) and study the effects of dielectric cap**. We observe that…
▽ More
Phosphorene is a unique single elemental semiconductor with two-dimensional layered structures. In this letter, we study the transistor behavior on mechanically exfoliated few-layer phosphorene with the top-gate. We achieve a high on-current of 144 mA/mm and hole mobility of 95.6 cm2/Vs. We deposit Al2O3 by atomic layer deposition (ALD) and study the effects of dielectric cap**. We observe that the polarity of the transistors alternated from p-type to ambipolar with Al2O3 grown on the top. We attribute this transition to the changes for the effective Schottky barrier heights for both electrons and holes at the metal contact edges, which is originated from fixed charges in the ALD dielectric.
△ Less
Submitted 12 May, 2014;
originally announced May 2014.
-
MoS2 Field-effect Transistors with Graphene/Metal Heterocontacts
Authors:
Yuchen Du,
Lingming Yang,
**gyun Zhang,
Han Liu,
Kausik Majumdar,
Paul D. Kirsch,
Peide D. Ye
Abstract:
For the first time, n-type few-layer MoS2 field-effect transistors with graphene/Ti as the hetero-contacts have been fabricated, showing more than 160 mA/mm drain current at 1 μm gate length with an on-off current ratio of 107. The enhanced electrical characteristic is confirmed in a nearly 2.1 times improvement in on-resistance and a 3.3 times improvement in contact resistance with hetero-contact…
▽ More
For the first time, n-type few-layer MoS2 field-effect transistors with graphene/Ti as the hetero-contacts have been fabricated, showing more than 160 mA/mm drain current at 1 μm gate length with an on-off current ratio of 107. The enhanced electrical characteristic is confirmed in a nearly 2.1 times improvement in on-resistance and a 3.3 times improvement in contact resistance with hetero-contacts compared to the MoS2 FETs without graphene contact layer. Temperature dependent study on MoS2/graphene hetero-contacts has been also performed, still unveiling its Schottky contact nature. Transfer length method and a devised I-V method have been introduced to study the contact resistance and Schottky barrier height in MoS2/graphene /metal hetero-contacts structure.
△ Less
Submitted 10 May, 2014; v1 submitted 21 March, 2014;
originally announced March 2014.
-
Phosphorene: A New 2D Material with High Carrier Mobility
Authors:
Han Liu,
Adam T. Neal,
Zhen Zhu,
David Tomanek,
Peide D. Ye
Abstract:
Preceding the current interest in layered materials for electronic applications, research in the 1960's found that black phosphorus combines high carrier mobility with a fundamental band gap. We introduce its counterpart, dubbed few-layer phosphorene, as a new 2D p-type material. Same as graphene and MoS2, phosphorene is flexible and can be mechanically exfoliated. We find phosphorene to be stable…
▽ More
Preceding the current interest in layered materials for electronic applications, research in the 1960's found that black phosphorus combines high carrier mobility with a fundamental band gap. We introduce its counterpart, dubbed few-layer phosphorene, as a new 2D p-type material. Same as graphene and MoS2, phosphorene is flexible and can be mechanically exfoliated. We find phosphorene to be stable and, unlike graphene, to have an inherent, direct and appreciable band-gap that depends on the number of layers. Our transport studies indicate a carrier mobility that reflects its structural anisotropy and is superior to MoS2. At room temperature, our phosphorene field-effect transistors with 1.0 um channel length display a high on-current of 194 mA/mm, a high hole field-effect mobility of 286 cm2/Vs, and an on/off ratio up to 1E4. We demonstrate the possibility of phosphorene integration by constructing the first 2D CMOS inverter of phosphorene PMOS and MoS2 NMOS transistors.
△ Less
Submitted 16 January, 2014;
originally announced January 2014.