-
Power-Efficient Sampling
Authors:
Satish Mulleti,
Timur Zirtiloglu,
Arman Tan,
Rabia Tugce Yazicigil,
Yonina C. Eldar
Abstract:
Analog-to-digital converters (ADCs) facilitate the conversion of analog signals into a digital format. While the specific designs and settings of ADCs can vary depending on their applications, it is crucial in many modern applications to minimize their power consumption. The significance of low-power ADCs is particularly evident in fields like mobile and handheld devices reliant on battery operati…
▽ More
Analog-to-digital converters (ADCs) facilitate the conversion of analog signals into a digital format. While the specific designs and settings of ADCs can vary depending on their applications, it is crucial in many modern applications to minimize their power consumption. The significance of low-power ADCs is particularly evident in fields like mobile and handheld devices reliant on battery operation. Key parameters of the ADCs that dictate the ADC's power are its sampling rate, dynamic range, and number of quantization bits. Typically, these parameters are required to be higher than a threshold value but can be reduced by using the structure of the signal and by leveraging preprocessing and the system application needs. In this review, we discuss four approaches relevant to a variety of applications.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
GRAND-EDGE: A Universal, Jamming-resilient Algorithm with Error-and-Erasure Decoding
Authors:
Furkan Ercan,
Kevin Galligan,
David Starobinski,
Muriel Medard,
Ken R. Duffy,
Rabia Tugce Yazicigil
Abstract:
Random jammers that overpower transmitted signals are a practical concern for many wireless communication protocols. As such, wireless receivers must be able to cope with standard channel noise and jamming (intentional or unintentional). To address this challenge, we propose a novel method to augment the resilience of the recent family of universal error-correcting GRAND algorithms. This method, c…
▽ More
Random jammers that overpower transmitted signals are a practical concern for many wireless communication protocols. As such, wireless receivers must be able to cope with standard channel noise and jamming (intentional or unintentional). To address this challenge, we propose a novel method to augment the resilience of the recent family of universal error-correcting GRAND algorithms. This method, called Erasure Decoding by Gaussian Elimination (EDGE), impacts the syndrome check block and is applicable to any variant of GRAND. We show that the proposed EDGE method naturally reverts to the original syndrome check function in the absence of erasures caused by jamming. We demonstrate this by implementing and evaluating GRAND-EDGE and ORBGRAND-EDGE. Simulation results, using a Random Linear Code (RLC) with a code rate of $105/128$, show that the EDGE variants lower both the Block Error Rate (BLER) and the computational complexity by up to five order of magnitude compared to the original GRAND and ORBGRAND algorithms. We further compare ORBGRAND-EDGE to Ordered Statistics Decoding (OSD), and demonstrate an improvement of up to three orders of magnitude in the BLER.
△ Less
Submitted 23 January, 2023;
originally announced January 2023.
-
Robust Task-Specific Beamforming with Low-Resolution ADCs for Power-Efficient Hybrid MIMO Receivers
Authors:
Eyyup Tasci,
Timur Zirtiloglu,
Alperen Yasar,
Yonina C. Eldar,
Nir Shlezinger,
Rabia Tugce Yazicigil
Abstract:
Multiple-input multiple-output (MIMO) systems exploit spatial diversity to facilitate multi-user communications with high spectral efficiency by beamforming. As MIMO systems utilize multiple antennas and radio frequency (RF) chains, they are typically costly to implement and consume high power. A common method to reduce the cost of MIMO receivers is utilizing less RF chains than antennas by employ…
▽ More
Multiple-input multiple-output (MIMO) systems exploit spatial diversity to facilitate multi-user communications with high spectral efficiency by beamforming. As MIMO systems utilize multiple antennas and radio frequency (RF) chains, they are typically costly to implement and consume high power. A common method to reduce the cost of MIMO receivers is utilizing less RF chains than antennas by employing hybrid analog/digital beamforming (HBF). However, the added analog circuitry involves active components whose consumed power may surpass that saved in RF chain reduction. An additional method to realize power-efficient MIMO systems is to use low-resolution analog-to-digital converters (ADCs), which typically compromises signal recovery accuracy. In this work, we propose a power-efficient hybrid MIMO receiver with low-quantization rate ADCs, by jointly optimizing the analog and digital processing in a hardware-oriented manner using task-specific quantization techniques. To mitigate power consumption on the analog front-end, we utilize efficient analog hardware architecture comprised of sparse low-resolution vector modulators, while accounting for their properties in design to maintain recovery accuracy and mitigate interferers in congested environments. To account for common mismatches induced by non-ideal hardware and inaccurate channel state information, we propose a robust mismatch aware design. Supported by numerical simulations and power analysis, our power-efficient MIMO receiver achieves comparable signal recovery performance to power-hungry fully-digital MIMO receivers using high-resolution ADCs. Furthermore, our receiver outperforms the task-agnostic HBF receivers with low-rate ADCs in recovery accuracy at lower power and successfully copes with hardware mismatches.
△ Less
Submitted 30 November, 2022;
originally announced December 2022.
-
A General Security Approach for Soft-information Decoding against Smart Bursty Jammers
Authors:
Furkan Ercan,
Kevin Galligan,
Ken R. Duffy,
Muriel Medard,
David Starobinski,
Rabia Tugce Yazicigil
Abstract:
Malicious attacks such as jamming can cause significant disruption or complete denial of service (DoS) to wireless communication protocols. Moreover, jamming devices are getting smarter, making them difficult to detect. Forward error correction, which adds redundancy to data, is commonly deployed to protect communications against the deleterious effects of channel noise. Soft-information error cor…
▽ More
Malicious attacks such as jamming can cause significant disruption or complete denial of service (DoS) to wireless communication protocols. Moreover, jamming devices are getting smarter, making them difficult to detect. Forward error correction, which adds redundancy to data, is commonly deployed to protect communications against the deleterious effects of channel noise. Soft-information error correction decoders obtain reliability information from the receiver to inform their decoding, but in the presence of a jammer such information is misleading and results in degraded error correction performance. As decoders assume noise occurs independently to each bit, a bursty jammer will lead to greater degradation in performance than a non-bursty one. Here we establish, however, that such temporal dependencies can aid inferences on which bits have been subjected to jamming, thus enabling counter-measures. In particular, we introduce a pre-decoding processing step that updates log-likelihood ratio (LLR) reliability information to reflect inferences in the presence of a jammer, enabling improved decoding performance for any soft detection decoder. The proposed method requires no alteration to the decoding algorithm. Simulation results show that the method correctly infers a significant proportion of jamming in any received frame. Results with one particular decoding algorithm, the recently introduced ORBGRAND, show that the proposed method reduces the block-error rate (BLER) by an order of magnitude for a selection of codes, and prevents complete DoS at the receiver.
△ Less
Submitted 8 October, 2022;
originally announced October 2022.
-
A Low-Power Dual-Factor Authentication Unit for Secure Implantable Devices
Authors:
Saurav Maji,
Utsav Banerjee,
Samuel H Fuller,
Mohamed R Abdelhamid,
Phillip M Nadeau,
Rabia Tugce Yazicigil,
Anantha P Chandrakasan
Abstract:
This paper presents a dual-factor authentication protocol and its low-power implementation for security of implantable medical devices (IMDs). The protocol incorporates traditional cryptographic first-factor authentication using Datagram Transport Layer Security - Pre-Shared Key (DTLS-PSK) followed by the user's touch-based voluntary second-factor authentication for enhanced security. With a low-p…
▽ More
This paper presents a dual-factor authentication protocol and its low-power implementation for security of implantable medical devices (IMDs). The protocol incorporates traditional cryptographic first-factor authentication using Datagram Transport Layer Security - Pre-Shared Key (DTLS-PSK) followed by the user's touch-based voluntary second-factor authentication for enhanced security. With a low-power compact always-on wake-up timer and touch-based wake-up circuitry, our test chip consumes only 735 pW idle state power at 20.15 Hz and 2.5 V. The hardware accelerated dual-factor authentication unit consumes 8 $μ$W at 660 kHz and 0.87 V. Our test chip was coupled with commercial Bluetooth Low Energy (BLE) transceiver, DC-DC converter, touch sensor and coin cell battery to demonstrate standalone implantable operation and also tested using in-vitro measurement setup.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.