-
Sedimentation of a Spheroidal Particle in an Elastoviscoplastic Fluid
Authors:
Alie Abbasi Yazdi,
Gaetano DAvino
Abstract:
The sedimentation dynamics of a prolate spheroidal particle in an unbounded elastoviscoplastic (EVP) fluid is studied by direct finite element simulations under inertialess flow conditions. The Saramito-Giesekus constitutive equation is employed to model the suspending liquid. The Arbitrary Lagrangian-Eulerian formulation is used to handle the particle motion. The sedimentation, lift, and angular…
▽ More
The sedimentation dynamics of a prolate spheroidal particle in an unbounded elastoviscoplastic (EVP) fluid is studied by direct finite element simulations under inertialess flow conditions. The Saramito-Giesekus constitutive equation is employed to model the suspending liquid. The Arbitrary Lagrangian-Eulerian formulation is used to handle the particle motion. The sedimentation, lift, and angular velocities of spheroids with aspect ratio between 1 and 8 are computed as the initial orientation, Bingham, and Weissenberg numbers are varied. Similarly to the purely viscoelastic case, a spheroid in an EVP fluid rotates up to align its major axis with the applied force. As the Bingham number increases, the settling rate monotonically reduces while the angular velocity first increases and then decreases. The initial orientation has a relevant effect on the particle stoppage because of the different drag experienced by the spheroid as its orientation is varied. The yielded and unyielded regions around the spheroid reveal that, for particle oriented transversely to the force, the yielded envelope shrinks near the tips due to the fast spatial decay of the stresses, and unyielded regions appear along the surface of the particle, similar to the solid caps observed at the front and back of a sphere. Fluid plasticity enhances the negative wake phenomenon that is observed at Weissenberg numbers significantly lower than the purely viscoelastic case. Results of the drag correction coefficient for particles aligned with longest axis along the force are presented.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
The Ebb and Flow of Brand Loyalty: A 28-Year Bibliometric and Content Analysis
Authors:
Azin Yazdi,
Sunder Ramachandran,
Hoda Mohsenifard,
Khaled Nawaser,
Faraz Sasani,
Behrooz Gharleghi
Abstract:
Business research is facing the challenge of scattered knowledge, particularly in the realm of brand loyalty (BL). Although literature reviews on BL exist, they predominantly concentrate on the pre-sent state, neglecting future trends. Therefore, a comprehensive review is imperative to ascertain emerging trends in BL This study employs a bibliometric approach, analyzing 1,468 papers from the Scopu…
▽ More
Business research is facing the challenge of scattered knowledge, particularly in the realm of brand loyalty (BL). Although literature reviews on BL exist, they predominantly concentrate on the pre-sent state, neglecting future trends. Therefore, a comprehensive review is imperative to ascertain emerging trends in BL This study employs a bibliometric approach, analyzing 1,468 papers from the Scopus database. Various tools including R software, VOS viewer software, and Publish or Perish are utilized. The aim is to portray the knowledge map, explore the publication years, identify the top authors and their co-occurrence, reliable documents, institutions, subjects, research hotspots, and pioneering countries and universities in the study of BL. The qualitative section of this research identifies gaps and emerging trends in BL through Word Cloud charts, word growth analysis, and a review of highly cited articles from the past four years. Results showed that highly cited articles mention topics such as brand love, consumer-brand identification, and social networks and the U.S. had the most productions in this field. Besides, most citations were related to Keller with 1,173 citations. Furthermore, in the qualitative section, social networks and brand experiences were found to be of interest to researchers in the field. Finally, by introducing the antecedents and consequences of BL, the gaps and emerging trends in BL were identified, so as to present the di-rection of future research in this area.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Sedimentation and migration dynamics of a spherical particle in an elastoviscoplastic fluid near a wall
Authors:
Alie Abbasi Yazdi,
Gaetano D'Avino
Abstract:
The sedimentation of a spherical particle in an elastoviscoplastic fluid in proximity of a flat wall is investigated by direct numerical simulations. The governing equations under inertialess conditions are solved by the finite element method with an Arbitrary Lagrangian-Eulerian formulation to manage the particle motion. The fluid is modeled with the Giesekus constitutive equation modified as pro…
▽ More
The sedimentation of a spherical particle in an elastoviscoplastic fluid in proximity of a flat wall is investigated by direct numerical simulations. The governing equations under inertialess conditions are solved by the finite element method with an Arbitrary Lagrangian-Eulerian formulation to manage the particle motion. The fluid is modeled with the Giesekus constitutive equation modified as proposed by Saramito (2007).
The sedimentation, migration, and angular velocities are computed as a function of the particle-wall distance for various Weissenberg and Bingham numbers. The presence of a yield stress reduces the settling velocity and reverses the migration direction as compared to the purely viscoelastic case. The effect of the confining wall on the yielded and unyielded regions around the particle is investigated. The reversed particle migration phenomenon observed in the elastoviscoplastic fluid is attributed to the different shear rate distribution around the particle due to the presence of the yielded region. The negative wake behind the particle is discussed and related to the axial component of the viscoelastic stress.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Investigation the Effect of Velocity inlet and Carrying Fluid on the Flow inside Coronary Artery
Authors:
Mohammadreza Nezamirad,
Nasim Sabetpour,
Azadeh Yazdi,
Amirmasoud Hamedi
Abstract:
In this study OpenFOAM 4.4.2 was used to investigate flow inside the coronary artery of the heart. This step is the first step of our future project, which is to include conjugate heat transfer of the heart with three main coronary arteries. Three different velocities were used as inlet boundary conditions to see the effect of velocity increase on velocity, pressure, and wall shear of coronary art…
▽ More
In this study OpenFOAM 4.4.2 was used to investigate flow inside the coronary artery of the heart. This step is the first step of our future project, which is to include conjugate heat transfer of the heart with three main coronary arteries. Three different velocities were used as inlet boundary conditions to see the effect of velocity increase on velocity, pressure, and wall shear of coronary artery. Also, three different fluids namely the University of Wisconsin solution, Gelatin, and blood was used to investigate the effect of different fluids on flow inside coronary artery. A code based on Reynolds Stress Navier Stokes (RANS) equations was written and was implemented with the real boundary condition that was calculated based on MRI images. In order to improve the accuracy of the current numerical scheme, hex dominant mesh is utilized. When the inlet velocity increases to 0.5 m/s, velocity, wall shear stress, and pressure increase at the narrower parts.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Development of novel algorithm to visualize blood vessels on 3D ultrasound images during liver surgery
Authors:
Fatemeh Salehihafshejani,
Alireza Ahmadian,
Afshin Shoeibi,
Roohallah Alizadehsani,
Habibollah Dashti,
Niloofar Ayoobi Yazdi,
Abbas Khosravi,
Saeid Nahavandi
Abstract:
Volume visualization is a method that displays three-dimensional (3D) data in two-dimensional (2D) space. Using 3D datasets instead of 2D traditional images improves the visualization of anatomical structures, and volume visualization helps radiologists and surgeons to review large datasets comprehensively so that diagnosis and treatment can be enhanced. In liver surgery, blood vessel detection is…
▽ More
Volume visualization is a method that displays three-dimensional (3D) data in two-dimensional (2D) space. Using 3D datasets instead of 2D traditional images improves the visualization of anatomical structures, and volume visualization helps radiologists and surgeons to review large datasets comprehensively so that diagnosis and treatment can be enhanced. In liver surgery, blood vessel detection is important. Liver vessels have various shapes and due to the presence of noise in the ultrasound images, they can be confused with noise. Suboptimal images can sometimes lead to surgical errors where the surgeon may cut the blood vessel in error. The ultrasound system is versatile and portable and has the advantage of being able to be used in the operating theatre. Due to the nature of B-mode ultrasound, 1-D transfer function volume visualization of images cannot abrogate shadow artifacts. While multi-dimensional transfer function improves the ability to define features of interest, the high dimensionality in the parameter domain renders it unwieldy and difficult for clinicians to work with. To overcome these limitations, an algorithm for volume visualization that can provide effective 3D visualization of noisy B-mode ultrasound images, which can be useful for clinicians, is proposed. We propose a method that is appropriate for liver ultrasound images focusing on vessels and tumors (if present) in order to delineate their structure and positions clearly to preempt surgical error during operation. This method can prevent possible errors during liver surgery by providing more detailed high quality 3D images for clinicians. Key Words: Visualization, 3D ultrasound image, Volume Rendering, Liver surgery, Liver vessels.
△ Less
Submitted 19 August, 2020;
originally announced August 2020.
-
Buckling of thin composite plates reinforced with randomly oriented, straight single-walled carbon nanotubes using B3-Spline finite strip method
Authors:
Hamid Foroughi,
Hamidreza Askarieh Yazdi,
Mojtaba Azhari
Abstract:
This paper is devoted to the mechanical buckling analysis of thin composite plates under straight single-walled carbon nanotubes reinforcement with uniform distribution and random orientations. In order to develop the fundamental equations, the B3-Spline finite strip method along with the classical plate theory is employed and the total potential energy is minimized which leads to an eigenvalue pr…
▽ More
This paper is devoted to the mechanical buckling analysis of thin composite plates under straight single-walled carbon nanotubes reinforcement with uniform distribution and random orientations. In order to develop the fundamental equations, the B3-Spline finite strip method along with the classical plate theory is employed and the total potential energy is minimized which leads to an eigenvalue problem. For deriving the effective modulus of thin composite plates reinforced with carbon nanotubes, the Mori-Tanaka method is used in which each straight carbon nanotube is modeled as a fiber with transversely isotropic elastic properties. The results of our numerical experiments including the critical buckling loads for rectangular thin composite plates reinforced by carbon nanotubes with various boundary conditions and different volume fractions of nanotubes are provided and the positive effect of using carbon nanotubes reinforcement in mechanical buckling of thin plates is illustrated.
△ Less
Submitted 28 February, 2018;
originally announced March 2018.
-
Glassy Dynamics of Brownian Particles with Velocity-Dependent Friction
Authors:
Anoosheh Yazdi,
Matthias Sperl
Abstract:
We consider a two-dimensional model system of Brownian particles in which slow particles are accelerated while fast particles are damped. The motion of the individual particles are described by a Langevin equation with Rayleigh-Helmholtz velocity dependent friction. In case of noninteracting particles, the time evolution equations lead to a non-Gaussian velocity distribution. The velocity dependen…
▽ More
We consider a two-dimensional model system of Brownian particles in which slow particles are accelerated while fast particles are damped. The motion of the individual particles are described by a Langevin equation with Rayleigh-Helmholtz velocity dependent friction. In case of noninteracting particles, the time evolution equations lead to a non-Gaussian velocity distribution. The velocity dependent friction allows negative values of the friction or energy intakes by slow particles which we consider as active motion, and also causes breaking of the fluctuation dissipation relation. Defining the effective temperature proportional to the second moment of velocity, it is shown that for a constant effective temperature the higher the noise strength, the lower are the number of active particles in the system. Using the Mori-Zwanzig formalism and the mode-coupling approximation, the equation of motion for the density auto-correlation function are derived. The equations are solved using the equilibrium structure factors. The integration-through-transients approach is used to derive a relation between the structure factor in the stationary state considering the interacting forces, and the conventional equilibrium static structure factor.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
-
Next-to-next-to-leading order QCD analysis of spin-dependent parton distribution functions and their uncertainties: Jacobi polynomials approach
Authors:
F. Taghavi Shahri,
Hamzeh Khanpour,
S. Atashbar Tehrani,
Z. Alizadeh Yazdi
Abstract:
We present a first QCD analysis of next-to-next-leading-order (NNLO) contributions of the spin-dependent parton distribution functions (PPDFs) in the nucleon and their uncertainties using the Jacobi polynomial approach. Having the NNLO contributions of the quark-quark and gluon-quark splitting functions in perturbative QCD (Nucl. Phys. B 889 (2014) 351-400), one can obtain the evolution of longitu…
▽ More
We present a first QCD analysis of next-to-next-leading-order (NNLO) contributions of the spin-dependent parton distribution functions (PPDFs) in the nucleon and their uncertainties using the Jacobi polynomial approach. Having the NNLO contributions of the quark-quark and gluon-quark splitting functions in perturbative QCD (Nucl. Phys. B 889 (2014) 351-400), one can obtain the evolution of longitudinally polarized parton densities of hadrons up to NNLO accuracy of QCD. A very large sets of recent and up-to-date experimental data of spin structure functions of the proton $g_1^p$, neutron $g_1^n$, and deuteron $g_1^d$ have been used in this analysis. The predictions for the NNLO calculations of the polarized parton distribution functions as well as the proton, neutron and deuteron polarized structure functions are compared with the corresponding results of the NLO approximation. We form a mutually consistent set of polarized PDFs due to the inclusion of the most available experimental data including the recently high-precision measurements from {\tt COMPASS16} experiments (Phys. Lett. B 753 (2016) 18-28). We have performed a careful estimation of the uncertainties using the most common and practical method, the Hessian method, for the polarized PDFs originating from the experimental errors. The proton, neutron and deuteron structure functions and also their first moments, $Γ^{\rm p, n, d}$, are in good agreement with the experimental data at small and large momentum fraction of $x$. We will discuss how our knowledge of spin-dependence structure functions can improve at small and large value of $x$ by the recent {\tt COMPASS16} measurements at CERN, the {\tt PHENIX} and {\tt STAR} measurements at RHIC, and at the future proposed colliders such as Electron-Ion collider (EIC).
△ Less
Submitted 23 June, 2016; v1 submitted 10 March, 2016;
originally announced March 2016.
-
Glass transition of charged particles in two-dimensional confinement
Authors:
Anoosheh Yazdi,
Marco Heinen,
Alexei Ivlev,
Hartmut Löwen,
Matthias Sperl
Abstract:
The glass transition of mesoscopic charged particles in two-dimensional confinement is studied by mode-coupling theory. We consider two types of effective interactions between the particles, corresponding to two different models for the distribution of surrounding ions that are integrated out in coarse-grained descriptions. In the first model, a planar monolayer of charged particles is immersed in…
▽ More
The glass transition of mesoscopic charged particles in two-dimensional confinement is studied by mode-coupling theory. We consider two types of effective interactions between the particles, corresponding to two different models for the distribution of surrounding ions that are integrated out in coarse-grained descriptions. In the first model, a planar monolayer of charged particles is immersed in an unbounded isotropic bath of ions, giving rise to an isotropically screened Debye-Hückel- (Yukawa-) type effective interaction. The second, experimentally more relevant system is a monolayer of negatively charged particles that levitate atop a flat horizontal electrode, as frequently encountered in laboratory experiments with complex (dusty) plasmas. A steady plasma current towards the electrode gives rise to an anisotropic effective interaction potential between the particles, with an algebraically long-ranged in-plane decay. In a comprehensive parameter scan that covers the typical range of experimentally accessible plasma conditions, we calculate and compare the mode-coupling predictions for the glass transition in both kinds of systems.
△ Less
Submitted 23 February, 2015;
originally announced February 2015.
-
Glass-Transition Properties from Hard Spheres to Charged Point Particles
Authors:
Anoosheh Yazdi,
Alexei Ivlev,
Sergei Khrapak,
Hubertus Thomas,
Gregor E. Morfill,
Hartmut Löwen,
Adam Wysocki,
Matthias Sperl
Abstract:
The glass transition is investigated in three dimensions for single and double Yukawa potentials for the full range of control parameters. For vanishing screening parameter, the limit of the one-component plasma is obtained; for large screening parameters and high coupling strengths, the glass-transition properties crossover to the hard-sphere system. Between the two limits, the entire transition…
▽ More
The glass transition is investigated in three dimensions for single and double Yukawa potentials for the full range of control parameters. For vanishing screening parameter, the limit of the one-component plasma is obtained; for large screening parameters and high coupling strengths, the glass-transition properties crossover to the hard-sphere system. Between the two limits, the entire transition diagram can be described by analytical functions. Different from other potentials, the glass-transition and melting lines for Yukawa potentials are found to follow shifted but otherwise identical curves in control-parameter space.
△ Less
Submitted 28 January, 2014;
originally announced January 2014.
-
Transversity Distribution Functions in the Valon Model
Authors:
Z. Alizadeh Yazdi,
F. Taghavi-Shahri,
F. Arash,
M. E. Zomorrodian
Abstract:
By using the valon model, we calculate the Transverse Momentum Distribution functions, TMDs, inside the Nucleon. TMDs indicate the probability to find partons with spin aligned (anti- aligned) to the transversely polarized nucleon. The results are in good agreements with all available experimental data and also global fits.
By using the valon model, we calculate the Transverse Momentum Distribution functions, TMDs, inside the Nucleon. TMDs indicate the probability to find partons with spin aligned (anti- aligned) to the transversely polarized nucleon. The results are in good agreements with all available experimental data and also global fits.
△ Less
Submitted 13 April, 2014; v1 submitted 7 January, 2014;
originally announced January 2014.
-
Transverse Spin Structure Function g2(x, Q2 ) in the Valon model
Authors:
Z. Alizadeh Yazdi,
A. Tahamtan,
F. Taghavi-Shahri,
F. Arash,
M. E. Zomorrodian
Abstract:
The spin dependent structure function, g2ww(x,Q^2), is calculated in the valon model. A simple approach is given for the determination of the twist-3 part of the g2(x, Q^2) in Mellin space; thus, enabling us to obtain the full transverse structure function, g2(x, Q^2) for proton, neutron and the deuteron. In light of the new data, we have further calculated the transversely polarized structure fun…
▽ More
The spin dependent structure function, g2ww(x,Q^2), is calculated in the valon model. A simple approach is given for the determination of the twist-3 part of the g2(x, Q^2) in Mellin space; thus, enabling us to obtain the full transverse structure function, g2(x, Q^2) for proton, neutron and the deuteron. In light of the new data, we have further calculated the transversely polarized structure function of g23He(x, Q^2). Our results are checked against the experimental data and nice agreements are observed.
△ Less
Submitted 12 August, 2015; v1 submitted 5 March, 2012;
originally announced March 2012.