-
Delayed Coding Scheme for Channels with Insertion, Deletion, and Substitution Errors
Authors:
Ryo Shibata,
Hiroyuki Yashima
Abstract:
We propose a new coding scheme, called the delayed coding (DC) scheme, for channels with insertion, deletion, and substitution (IDS) errors. The proposed scheme employs delayed encoding and non-iterative detection and decoding strategies to manage the transmission of multiple codewords in a linear code. In the DC scheme, a channel input sequence consists of subblocks of multiple codewords from the…
▽ More
We propose a new coding scheme, called the delayed coding (DC) scheme, for channels with insertion, deletion, and substitution (IDS) errors. The proposed scheme employs delayed encoding and non-iterative detection and decoding strategies to manage the transmission of multiple codewords in a linear code. In the DC scheme, a channel input sequence consists of subblocks of multiple codewords from the previous to current time instances. At the receiver side, the maximum a posteriori detection applies to the received sequences that contain information of the codeword at the current time instance, where priorly decoded codewords aid the detection. The channel code decoding is then performed, and extrinsic messages are exploited for the codeword estimations of the following time instances. We show that the rate achievable with the DC scheme over the IDS channel approaches the symmetric information rate of the channel. Moreover, we show the excellent asymptotic and finite-length performances of the DC scheme in conjunction with low-density parity-check codes.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
IRDFF-II: A New Neutron Metrology Library
Authors:
A. Trkov,
P. J. Griffin,
S. P. Simakov,
L. R. Greenwood,
K. I. Zolotarev,
R. Capote,
D. L. Aldama,
V. Chechev,
C. Destouches,
A. C. Kahler,
C. Konno,
M. Koštál,
M. Majerle,
E. Malambu,
M. Ohta,
V. G. Pronyaev,
V. Radulović,
S. Sato,
M. Schulc,
E. Šimečková,
I. Vavtar,
J. Wagemans,
M. White,
H. Yashima
Abstract:
High quality nuclear data is the most fundamental underpinning for all neutron metrology applications. This paper describes the release of version II of the International Reactor Dosimetry and Fusion File (IRDFF-II) that contains a consistent set of nuclear data for fission and fusion neutron metrology applications up to 60~MeV neutron energy. The library is intended to support: a) applications in…
▽ More
High quality nuclear data is the most fundamental underpinning for all neutron metrology applications. This paper describes the release of version II of the International Reactor Dosimetry and Fusion File (IRDFF-II) that contains a consistent set of nuclear data for fission and fusion neutron metrology applications up to 60~MeV neutron energy. The library is intended to support: a) applications in research reactors; b) safety and regulatory applications in the nuclear power generation in commercial fission reactors; and c) material damage studies in support of the research and development of advanced fusion concepts. The paper describes the contents of the library, documents the thorough verification process used in its preparation, and provides an extensive set of validation data gathered from a wide range of neutron benchmark fields. The new \mbox{IRDFF-II} library includes 119 metrology reactions, four cover material reactions to support self-shielding corrections, five metrology metrics used by the dosimetry community, and cumulative fission products yields for seven fission products in three different neutron energy regions. In support of characterizing the measurement of the residual nuclei from the dosimetry reactions and the fission product decay modes, the present document lists the recommended decay data, particle emission energies and probabilities for 68 activation products. It also includes neutron spectral characterization data for 29 neutron benchmark fields for the validation of the library contents. The IRDFF-II library and comprehensive documentation is available online at https://www-nds.iaea.org/IRDFF/. Evaluated cross sections can be compared with experimental data and other evaluations at https://www-nds.iaea.org/exfor/endf.htm. The new library is expected to become the international reference in neutron metrology for multiple applications.
△ Less
Submitted 21 October, 2019; v1 submitted 7 September, 2019;
originally announced September 2019.
-
Radionuclides in the Cooling Water Systems for the NuMi Beamline and the Antiproton Production Target Station at Fermilab
Authors:
Hiroshi Matsumura,
Akihiro Toyoda,
Kotaro Bessho,
Shun Sekimoto,
Hiroshi Yashima,
Yoshimi Kasugai,
Norihiro Matsuda,
Yukio Sakamoto,
Hiroshi Nakashima,
Koji Oishi,
David Boehnlein,
Gary Lauten,
Anthony Leveling,
Nikolai Mokhov,
Kamran Vaziri
Abstract:
At the 120-GeV proton accelerator facilities of Fermilab, USA, water samples were collected from the cooling water systems for the target, magnetic horn1, magnetic horn2, decay pipe, and hadron absorber at the NuMI beamline as well as from the cooling water systems for the collection lens, pulse magnet and collimator, and beam absorber at the antiproton production target station, just after the sh…
▽ More
At the 120-GeV proton accelerator facilities of Fermilab, USA, water samples were collected from the cooling water systems for the target, magnetic horn1, magnetic horn2, decay pipe, and hadron absorber at the NuMI beamline as well as from the cooling water systems for the collection lens, pulse magnet and collimator, and beam absorber at the antiproton production target station, just after the shutdown of the accelerators for a maintenance period. Specific activities of γ -emitting radionuclides and 3H in these samples were determined using high-purity germanium detectors and a liquid scintillation counter. The cooling water contained various radionuclides depending on both major and minor materials in contact with the water. The activity of the radionuclides depended on the presence of a deionizer. Specific activities of 3H were used to estimate the residual rates of 7Be. The estimated residual rates of 7Be in the cooling water were approximately 5% for systems without deionizers and less than 0.1% for systems with deionizers, although the deionizers function to remove 7Be from the cooling water.
△ Less
Submitted 29 August, 2014;
originally announced September 2014.
-
Shielding Experiments Under JASMIN Collaboration at Fermilab(III) - Measurement of High-Energy Neutrons Penetrating a Thick Iron Shield from the Antiproton Production Target by AU Activation Method
Authors:
H. Matsumura,
N. Kinoshita,
H. Iwase,
A. Toyoda,
Y. Kasugai,
N. Matsuda,
Y. Sakamoto,
H. Nakashima,
H. Yashima,
N. Mokhov,
A. Leveling,
D. Boehlein,
K. Vaziri,
G. Lautenschlager,
W. Schmitt,
K. Oishi
Abstract:
In an antiproton production (Pbar) target station of the Fermi National Accelerator Laboratory (FNAL), the secondary particles produced by bombarding a target with 120-GeV protons are shielded by a thick iron shield. In order to obtain experimental data on high-energy neutron transport at more than 100-GeV-proton accelerator facilities, we indirectly measured more than 100-MeV neutrons at the outs…
▽ More
In an antiproton production (Pbar) target station of the Fermi National Accelerator Laboratory (FNAL), the secondary particles produced by bombarding a target with 120-GeV protons are shielded by a thick iron shield. In order to obtain experimental data on high-energy neutron transport at more than 100-GeV-proton accelerator facilities, we indirectly measured more than 100-MeV neutrons at the outside of the iron shield at an angle of 50° in the Pbar target station. The measurement was performed by using the Au activation method coupled with a low-background γ-ray counting system. As an indicator for the neutron flux, we determined the production rates of 8 spallation nuclides (196-Au, 188-Pt, 189-Ir, 185-Os, 175-Hf, 173-Lu, 171-Lu, and 169-Yb) in the Au activation detector. The measured production rates were compared with the theoretical production rates calculated using PHITS. We proved that the Au activation method can serve as a powerful tool for indirect measurements of more than 100-MeV neutrons that play a vital role in neutron transport. These results will be important for clarifying the problems in theoretical calculations of high-energy neutron transport.
△ Less
Submitted 1 May, 2012;
originally announced May 2012.
-
Shielding experiments by the JASMIN collaboration at Fermilab (II) - Radioactivity measurement induced by secondary particles from the anti-proton production target
Authors:
Hiroshi Yashima,
Norihiro Matsuda,
Yoshimi Kasugai,
Hiroshi Matsumura,
Hiroshi Iwase,
Norikazu Kinoshita,
David Boehnlein,
Gary Lauten,
Anthony Leveling,
Nikolai Mokhov,
Kamran Vaziri,
Koji Oishi,
Hiroshi Nakashima,
Yukio Sakamoto
Abstract:
The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consisting an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10**12 protons per s…
▽ More
The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consisting an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10**12 protons per second. Samples of Al, Nb, Cu, and Au were placed near the target to investigate the spatial and energy distribution of secondary particles emitted from it. After irradiation, the induced activities of the samples were measured by studying their gamma ray spectra using HPGe detectors. The production rates of 30 nuclides induced in Al, Nb, Cu, Au samples were obtained. These rates increase for samples placed in a forward (small angle) position relative to the target. The angular dependence of these reaction rates becomes larger for increasing threshold energy. These experimental results are compared with Monte Carlo calculations. The calculated results generally agree with the experimental results to within a factor of 2 to 3.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.
-
JASMIN: Japanese-American study of muon interactions and neutron detection
Authors:
Hiroshi Nakashima,
N. V. Mokhov,
Yoshimi Kasugai,
Norihiro Matsuda,
Yosuke Iwamoto,
Yukio Sakamoto,
Anthony F. Leveling,
David J. Boehnlein,
Kamran Vaziri,
Hiroshi Matsumura,
Masayuki Hagiwara,
Hiroshi Iwase,
Syuichi Ban,
Hideo Hirayama,
Takashi Nakamura,
Koji Oishi,
Nobuhiro Shigyo,
Hiroyuki Arakawa,
Tsuyoshi Kajimoto,
Kenji Ishibashi,
Hiroshi Yashima,
Shun Sekimoto,
Norikazu Kinoshita,
Hee-Seock Lee,
Koji Niita
Abstract:
Experimental studies of shielding and radiation effects at Fermi National Accelerator Laboratory (FNAL) have been carried out under collaboration between FNAL and Japan, aiming at benchmarking of simulation codes and study of irradiation effects for upgrade and design of new high-energy accelerator facilities. The purposes of this collaboration are (1) acquisition of shielding data in a proton bea…
▽ More
Experimental studies of shielding and radiation effects at Fermi National Accelerator Laboratory (FNAL) have been carried out under collaboration between FNAL and Japan, aiming at benchmarking of simulation codes and study of irradiation effects for upgrade and design of new high-energy accelerator facilities. The purposes of this collaboration are (1) acquisition of shielding data in a proton beam energy domain above 100 GeV; (2) further evaluation of predictive accuracy of the PHITS and MARS codes; (3) modification of physics models and data in these codes if needed; (4) establishment of irradiation field for radiation effect tests; and (5) development of a code module for improved description of radiation effects. A series of experiments has been performed at the Pbar target station and NuMI facility, using irradiation of targets with 120 GeV protons for antiproton and neutrino production, as well as the M-test beam line (M-test) for measuring nuclear data and detector responses. Various nuclear and shielding data have been measured by activation methods with chemical separation techniques as well as by other detectors such as a Bonner ball counter. Analyses with the experimental data are in progress for benchmarking the PHITS and MARS15 codes. In this presentation recent activities and results are reviewed.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
