-
Using a Metasurface to Enhance the Radiation Efficiency of Subterahertz Antennas Printed on Thick Substrates
Authors:
Yevhen M. Yashchyshyn,
Peter L. Tokarsky
Abstract:
This study investigates the possibility of increasing the radiation efficiency of printed antennas and arrays by suppressing their inherent surface waves using a metasurface made of quad-split rings (QSR). A symmetrical resonant microstrip dipole and a four-element series-fed dipole array printed on an infinite grounded dielectric layer (layer thickness: 0.2 mm; relative permittivity: 9.4; tan del…
▽ More
This study investigates the possibility of increasing the radiation efficiency of printed antennas and arrays by suppressing their inherent surface waves using a metasurface made of quad-split rings (QSR). A symmetrical resonant microstrip dipole and a four-element series-fed dipole array printed on an infinite grounded dielectric layer (layer thickness: 0.2 mm; relative permittivity: 9.4; tan delta: 0.0005) were simulated with FEKO 2022 software. Conducted at 100-116 GHz, the numerical results revealed extremely low radiation efficiencies of approximately 31% and 40% for the studied dipole and dipole array, respectively, which resulted from the presence of surface waves in the dielectric. However, placing only one QSR near each dipole arm triggered an increase in radiation efficiency by 2.5 times (up to 75%). The use of a metasurface in the form of two small QSR arrays triggered a pronounced improvement in radiation efficiency, reaching 93.6% and 96.5% for the studied dipole and dipole array, respectively. Analysis of the electric field distribution images showed that this enhancement resulted from surface wave suppression.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Efficient Absorption of Terahertz Radiation in Graphene Polymer Composites
Authors:
Zahra Barani,
Kamil Stelmaszczyk,
Fariborz Kargar,
Yevhen Yashchyshyn,
Grzegorz Cywiński,
Sergey Rumyantsev,
Alexander A. Balandin
Abstract:
We demonstrate that polymer composites with a low loading of graphene, below 1.2 wt. %, are efficient as electromagnetic absorbers in the THz frequency range. The epoxy-based graphene composites were tested at frequencies from 0.25 THz to 4 THz, revealing total shielding effectiveness of 85 dB (1 mm thickness) with graphene loading of 1.2 wt. % at the frequency f=1.6 THz. The THz radiation is most…
▽ More
We demonstrate that polymer composites with a low loading of graphene, below 1.2 wt. %, are efficient as electromagnetic absorbers in the THz frequency range. The epoxy-based graphene composites were tested at frequencies from 0.25 THz to 4 THz, revealing total shielding effectiveness of 85 dB (1 mm thickness) with graphene loading of 1.2 wt. % at the frequency f=1.6 THz. The THz radiation is mostly blocked by absorption rather than reflection. The efficiency of the THz radiation shielding by the lightweight, electrically insulating composites, increases with increasing frequency. Our results suggest that even the thin-film or spray coatings of graphene composites with thickness in the few-hundred-micrometer range can be sufficient for blocking THz radiation in many practical applications.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Electrically-Insulating Flexible Films with Quasi-One-Dimensional van-der-Waals Fillers as Efficient Electromagnetic Shields
Authors:
Zahra Barani,
Fariborz Kargar,
Yassamin Ghafouri,
Subhajit Ghosh,
Konrad Godziszewski,
Saba Seyedmahmoudbaraghani,
Yevhen Yashchyshyn,
Grzegorz Cywiński,
Sergey Rumyantsev,
Tina T. Salguero,
Alexander A. Balandin
Abstract:
We report polymer composite films containing fillers comprised of quasi-one-dimensional (1D) van der Waals materials, specifically transition metal trichalcogenides containing 1D structural motifs that enable their exfoliation into bundles of atomic threads. These nanostructures are characterized by extremely large aspect ratios of up to 10^6. The polymer composites with low loadings of quasi-1D T…
▽ More
We report polymer composite films containing fillers comprised of quasi-one-dimensional (1D) van der Waals materials, specifically transition metal trichalcogenides containing 1D structural motifs that enable their exfoliation into bundles of atomic threads. These nanostructures are characterized by extremely large aspect ratios of up to 10^6. The polymer composites with low loadings of quasi-1D TaSe3 fillers (below 3 vol. %) revealed excellent electromagnetic interference shielding in the X-band GHz and EHF sub-THz frequency ranges, while remaining DC electrically insulating. The unique electromagnetic shielding characteristics of these films are attributed to effective coupling of the electromagnetic waves to the high-aspect-ratio electrically-conductive TaSe3 atomic-thread bundles even when the filler concentration is below the electrical percolation threshold. These novel films are promising for high-frequency communication technologies, which require electromagnetic shielding films that are flexible, lightweight, corrosion resistant, electrically insulating and inexpensive.
△ Less
Submitted 20 January, 2021;
originally announced January 2021.
-
Graphene Composites as Efficient Electromagnetic Absorbers in the Extremely High Frequency Band
Authors:
Zahra Barani,
Fariborz Kargar,
Konrad Godziszewski,
Adil Rehman,
Yevhen Yashchyshyn,
Sergey Rumyantsev,
Grzegorz Cywiński,
Wojciech Knap,
Alexander A. Balandin
Abstract:
We report on the synthesis of the epoxy-based composites with graphene fillers and testing their electromagnetic shielding efficiency by the quasi-optic free-space method in the extremely high frequency (EHF) band (220 - 325 GHz). The curing adhesive composites were produced by a scalable technique with a mixture of single-layer and few-layer graphene layers of a few-micron lateral dimensions. It…
▽ More
We report on the synthesis of the epoxy-based composites with graphene fillers and testing their electromagnetic shielding efficiency by the quasi-optic free-space method in the extremely high frequency (EHF) band (220 - 325 GHz). The curing adhesive composites were produced by a scalable technique with a mixture of single-layer and few-layer graphene layers of a few-micron lateral dimensions. It was found that the electromagnetic transmission, T, is low even at small concentrations of graphene fillers: T<1% at frequency of 300 GHz for a composite with only 1 wt% of graphene. The main shielding mechanism in composites with the low graphene loading is absorption. The composites of 1 mm thickness and graphene loading of 8 wt% provide excellent electromagnetic shielding of 70 dB in the sub-terahertz EHF frequency with negligible energy reflection to the environment. The developed lightweight adhesive composites with graphene fillers can be used as electromagnetic absorbers in the high-frequency microwave radio relays, microwave remote sensors, millimeter wave scanners, and wireless local area networks.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
