-
Proposal and demonstration of germanium-on-silicon lock-in pixels for indirect time-of-flight based three-dimensional sensing
Authors:
N. Na,
S. -L. Cheng,
H. -D. Liu,
M. -J. Yang,
C. -Y. Chen,
K. -C. Chu,
H. -W. Chen,
Y. -T. Chou,
C. -T. Lin,
W. -H. Liu,
C. -F. Liang,
C. -L. Chen,
S. -W. Chu,
B. -J. Chen,
Y. -F. Lyu,
S. -L. Chen
Abstract:
We propose the use of germanium-on-silicon technology for indirect time-of-flight based three-dimensional sensing, and demonstrate a novel lock-in pixel featuring high quantum efficiency and large frequency bandwidth. Compared to silicon pixels, germanium-on-silicon pixels simultaneously maintain a high quantum efficiency and a high demodulation contrast deep into GHz frequency regime, which enabl…
▽ More
We propose the use of germanium-on-silicon technology for indirect time-of-flight based three-dimensional sensing, and demonstrate a novel lock-in pixel featuring high quantum efficiency and large frequency bandwidth. Compared to silicon pixels, germanium-on-silicon pixels simultaneously maintain a high quantum efficiency and a high demodulation contrast deep into GHz frequency regime, which enable consistently superior depth accuracy in both indoor and outdoor scenarios. Physical model, numerical simulation, device fabrication and characterization, system performance comparison, and laser safety analysis are presented. Our work paves a new path to high-performance time-of-flight rangers and imagers, as well as potential adoption of lasers operated at a longer near infrared wavelength that falls outside of the operation window of silicon pixels.
△ Less
Submitted 15 June, 2020; v1 submitted 19 June, 2018;
originally announced June 2018.
-
Fast Instability Caused by Electron Cloud in Combined Function Magnets
Authors:
S. A. Antipov,
P. Adamson,
A. Burov,
S. Nagaitsev,
M. -J. Yang
Abstract:
One of the factors which may limit the intensity in the Fermilab Recycler is a fast transverse instability. It develops within a hundred turns and, in certain conditions, may lead to a beam loss. The high rate of the instability suggest that its cause is electron cloud. We studied the phenomena by observing the dynamics of stable and unstable beam, simulating numerically the build-up of the electr…
▽ More
One of the factors which may limit the intensity in the Fermilab Recycler is a fast transverse instability. It develops within a hundred turns and, in certain conditions, may lead to a beam loss. The high rate of the instability suggest that its cause is electron cloud. We studied the phenomena by observing the dynamics of stable and unstable beam, simulating numerically the build-up of the electron cloud, and developed an analytical model of an electron cloud driven instability with the electrons trapped in combined function di-poles. We found that beam motion can be stabilized by a clearing bunch, which confirms the electron cloud nature of the instability. The clearing suggest electron cloud trap** in Recycler combined function mag-nets. Numerical simulations show that up to 1% of the particles can be trapped by the magnetic field. Since the process of electron cloud build-up is exponential, once trapped this amount of electrons significantly increases the density of the cloud on the next revolution. In a Recycler combined function dipole this multi-turn accumulation allows the electron cloud reaching final intensities orders of magnitude greater than in a pure dipole. The estimated resulting instability growth rate of about 30 revolutions and the mode fre-quency of 0.4 MHz are consistent with experimental observations and agree with the simulation in the PEI code. The created instability model allows investigating the beam stability for the future intensity upgrades.
△ Less
Submitted 12 December, 2016;
originally announced December 2016.
-
Coalescing at 8 GeV in the Fermilab Main Injector
Authors:
D. J. Scott,
D. Capista,
B. Chase,
J. Dye,
I. Kourbanis,
K. Seiya,
M. -J. Yang
Abstract:
For Project X, it is planned to inject a beam of 3 10**11 particles per bunch into the Main Injector. To prepare for this by studying the effects of higher intensity bunches in the Main Injector it is necessary to perform coalescing at 8 GeV. The results of a series of experiments and simulations of 8 GeV coalescing are presented. To increase the coalescing efficiency adiabatic reduction of the 53…
▽ More
For Project X, it is planned to inject a beam of 3 10**11 particles per bunch into the Main Injector. To prepare for this by studying the effects of higher intensity bunches in the Main Injector it is necessary to perform coalescing at 8 GeV. The results of a series of experiments and simulations of 8 GeV coalescing are presented. To increase the coalescing efficiency adiabatic reduction of the 53 MHz RF is required, resulting in ~70% coalescing efficiency of 5 initial bunches. Data using wall current monitors has been taken to compare previous work and new simulations for 53 MHz RF reduction, bunch rotations and coalescing, good agreement between experiment and simulation was found. Possible schemes to increase the coalescing efficiency and generate even higher intensity bunches are discussed. These require improving the timing resolution of the low level RF and/or tuning the adiabatic voltage reduction of the 53 MHz.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.
-
Single/Few Bunch Space Charge Effects at 8-GeV in the Fermilab Main Injector
Authors:
D. J. Scott,
D. Capista,
I. Kourbanis,
K. Seiya,
M. -J. Yang
Abstract:
For Project X, it is planned to inject a beam of 3x10**11 particles per bunch into the Main Injector. Therefore, at 8-GeV, there will be increased space charge tune shifts and an increased incoherent tune spread. In preparation for these higher intensity bunches exploratory studies have commenced looking at the transmission of different intensity bunches at different tunes. An experiment is descri…
▽ More
For Project X, it is planned to inject a beam of 3x10**11 particles per bunch into the Main Injector. Therefore, at 8-GeV, there will be increased space charge tune shifts and an increased incoherent tune spread. In preparation for these higher intensity bunches exploratory studies have commenced looking at the transmission of different intensity bunches at different tunes. An experiment is described with results for bunch intensities between 20 and 300 10**9 particles. To achieve the highest intensity bunches coalescing at 8-GeV is required, resulting in a longer bunch length. Comparisons show that similar transmission curves are obtained when the intensity and bunch length have increased by factors of 3.2 and 3.4 respectively, indicating the incoherent tune shifts are similar, as expected from theory. The results of these experiments will be used in conjugation with simulations to further study high intensity bunches in the Main Injector.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
A gap clearing kicker for Main Injector
Authors:
I. Kourbanis,
P. Adamson,
J. Biggs,
B. Brown,
D. Capista,
C. C. Jensen,
G. E. Krafczyk,
D. K. Morris,
D. Scott,
K. Seiya,
S. R. Ward,
G. Wu,
M. -J. Yang
Abstract:
Fermilab Main Injector has been operating at high Beam Power levels since 2008 when multi-batch slip stacking became operational. In order to maintain and increase the beam power levels the localized beam loss due to beam left over in the injection kicker gap during slip stacking needs to be addressed. A set of gap clearing kickers that kick any beam left in the injection gap to the beam abort hav…
▽ More
Fermilab Main Injector has been operating at high Beam Power levels since 2008 when multi-batch slip stacking became operational. In order to maintain and increase the beam power levels the localized beam loss due to beam left over in the injection kicker gap during slip stacking needs to be addressed. A set of gap clearing kickers that kick any beam left in the injection gap to the beam abort have been built. The kickers were installed in the summer of 2009 and became operational in November of 2010. The kicker performance and its effect on the beam losses will be described.
△ Less
Submitted 16 August, 2012;
originally announced August 2012.
-
Infrared anomalous Hall effect in SrRuO$_3$: Evidence for crossover to intrinsic behavior
Authors:
M. -H. Kim,
G. Acbas,
M. -H. Yang,
M. Eginligil,
P. Khalifah,
I. Ohkubo,
H. Christen,
D. Mandrus,
Z. Fang,
J. Cerne
Abstract:
The origin of the Hall effect in many itinerant ferromagnets is still not resolved, with an anomalous contribution from the sample magnetization that can exhibit extrinsic or intrinsic behavior. We report the first mid-infared (MIR) measurements of the complex Hall ($θ_H$), Faraday ($θ_F$), and Kerr ($θ_K$) angles, as well as the Hall conductivity ($σ_{xy}$) in a SrRuO$_3$ film in the 115-1400 m…
▽ More
The origin of the Hall effect in many itinerant ferromagnets is still not resolved, with an anomalous contribution from the sample magnetization that can exhibit extrinsic or intrinsic behavior. We report the first mid-infared (MIR) measurements of the complex Hall ($θ_H$), Faraday ($θ_F$), and Kerr ($θ_K$) angles, as well as the Hall conductivity ($σ_{xy}$) in a SrRuO$_3$ film in the 115-1400 meV energy range. The magnetic field, temperature, and frequency dependence of the Hall effect is explored. The MIR magneto-optical response shows very strong frequency dependence, including sign changes. Below 200 meV, the MIR $θ_H (T)$ changes sign between 120 and 150 K, as is observed in dc Hall measurements. Above 200 meV, the temperature dependence of $θ_H$ is similar to that of the dc magnetization and the measurements are in good agreement with predictions from a band calculation for the intrinsic anomalous Hall effect (AHE). The temperature and frequency dependence of the measured Hall effect suggests that whereas the behavior above 200 meV is consistent with an intrinsic AHE, the extrinsic AHE plays an important role in the lower energy response.
△ Less
Submitted 26 October, 2009; v1 submitted 23 October, 2009;
originally announced October 2009.
-
Determination of the infrared complex magneto-conductivity tensor in itinerant ferromagnets from Faraday and Kerr measurements
Authors:
M. -H. Kim,
G. Acbas,
M. -H. Yang,
I. Ohkubo,
H. Christen,
D. Mandrus,
M. A. Scarpulla,
O. D. Dubon,
Z. Schlesinger,
P. Khalifah,
J. Cerne
Abstract:
We present measurement and analysis techniques that allow the complete complex magneto-conductivity tensor to be determined from mid-infrared (11-1.6 micron; 100-800 meV) measurements of the complex Faraday (theta_F) and Kerr (theta_K) angles. Since this approach involves measurement of the geometry (orientation axis and ellipticity of the polarization) of transmitted and reflected light, no abs…
▽ More
We present measurement and analysis techniques that allow the complete complex magneto-conductivity tensor to be determined from mid-infrared (11-1.6 micron; 100-800 meV) measurements of the complex Faraday (theta_F) and Kerr (theta_K) angles. Since this approach involves measurement of the geometry (orientation axis and ellipticity of the polarization) of transmitted and reflected light, no absolute transmittance or reflectance measurements are required. Thick film transmission and reflection equations are used to convert the complex theta_F and theta_K into the complex longitudinal conductivity sigma_xx and the complex transverse (Hall) conductivity sigma_xy. theta_F and theta_K are measured in a Ga_(1-x)Mn_xAs and SrRuO_3 films. The resulting sigma_xx is compared to the values obtained from conventional transmittance and reflectance measurements, as well as the results from Kramers-Kronig analysis of reflectance measurements on similar films.
△ Less
Submitted 5 April, 2007; v1 submitted 9 January, 2007;
originally announced January 2007.
-
Infrared Hall Effect in the electron-doped high Tc cuprate Pr(2-x)Ce(x)CuO(4)
Authors:
A. Zimmers,
L. Shi,
D. C. Schmadel,
W. M. Fisher,
R. L. Greene,
H. D. Drew,
M. Houseknecht,
G. Acbas,
M. -H. Kim,
M. -H. Yang,
J. Cerne,
J. Lin,
A. Millis
Abstract:
The electron-doped cuprate Pr(2-x)Ce(x)CuO(4) is investigated using infrared magneto-optical measurements. The optical Hall conductivity sigma_{xy} shows a strong do**, frequency and temperature dependence consistent with the presence of a temperature and do**-dependent coherent backscattering amplitude which doubles the electronic unit cell. The data suggest that the coherent backscattering…
▽ More
The electron-doped cuprate Pr(2-x)Ce(x)CuO(4) is investigated using infrared magneto-optical measurements. The optical Hall conductivity sigma_{xy} shows a strong do**, frequency and temperature dependence consistent with the presence of a temperature and do**-dependent coherent backscattering amplitude which doubles the electronic unit cell. The data suggest that the coherent backscattering vanishes at a quantum critical point inside the superconducting dome and is associated with the commensurate antiferromagnetic order observed by other workers. Using a spectral weight analysis we have further investigated the Fermi-liquid like behavior of the overdoped sample. The observed Hall-conductance spectral weight is about 10 times less than that predicted by band theory, raising the fundamental question concerning the effect of Mott and antiferromagnetic correlations on the Hall conductance of strongly correlated materials.
△ Less
Submitted 21 December, 2006; v1 submitted 4 October, 2005;
originally announced October 2005.
-
From one to two dimensions in quantum spin systems
Authors:
A. Fledderjohann,
K. -H. Mütter,
M. -S. Yang,
M. Karbach
Abstract:
We study the first derivative of the staggered magnetization squared $dm^†(θ)^2/dθ$ and the second derivative $d^2e_0(θ)/dθ^2$ of the ground state energy per site. The parameter $θ$ controls the anisotropy between horizontal and vertical couplings in a two-dimensional (2D) spin-1/2 antiferromagnetic Heisenberg model. It is shown, that both derivatives diverge at $θ=1$, where the anisotropic 2D m…
▽ More
We study the first derivative of the staggered magnetization squared $dm^†(θ)^2/dθ$ and the second derivative $d^2e_0(θ)/dθ^2$ of the ground state energy per site. The parameter $θ$ controls the anisotropy between horizontal and vertical couplings in a two-dimensional (2D) spin-1/2 antiferromagnetic Heisenberg model. It is shown, that both derivatives diverge at $θ=1$, where the anisotropic 2D model reduces to the 1D model.
△ Less
Submitted 4 November, 1997;
originally announced November 1997.
