-
Coarse particulate matter air quality in East Asia: implications for fine particulate nitrate
Authors:
Shixian Zhai,
Daniel J. Jacob,
Drew C. Pendergrass,
Nadia K. Colombi,
Viral Shah,
Laura Hyesung Yang,
Qiang Zhang,
Shuxiao Wang,
Hwa** Kim,
Yele Sun,
**-Soo Choi,
**-Soo Park,
Gan Luo,
Fangqun Yu,
Jung-Hun Woo,
Younha Kim,
Jack E. Dibb,
Taehyoung Lee,
**-Seok Han,
Bruce E. Anderson,
Ke Li,
Hong Liao
Abstract:
Coarse particulate matter (PM) is a serious air pollution problem in East Asia. Analysis of air quality network observations in the North China Plain and the Seoul Metropolitan Area shows that it is mainly anthropogenic and has decreased by 21% over 2015-2019. This anthropogenic coarse PM is generally not included in air quality models but scavenges nitric acid to suppress the formation of fine pa…
▽ More
Coarse particulate matter (PM) is a serious air pollution problem in East Asia. Analysis of air quality network observations in the North China Plain and the Seoul Metropolitan Area shows that it is mainly anthropogenic and has decreased by 21% over 2015-2019. This anthropogenic coarse PM is generally not included in air quality models but scavenges nitric acid to suppress the formation of fine particulate (PM2.5) nitrate, a major contributor to PM2.5 pollution. Including it in the GEOS-Chem model decreases simulated PM2.5 nitrate to improve agreement with observations. Decreasing anthropogenic coarse PM over 2015-2019 directly increases PM2.5 nitrate in summer, offsetting the effect of other emission controls, while in winter it increases the sensitivity of PM2.5 nitrate to ammonia and sulfur dioxide emissions. Our work implies the need for stronger ammonia and nitrogen oxides emission controls to improve PM2.5 air quality as coarse PM continues to decrease.
△ Less
Submitted 21 December, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
Dynamics evolution of a solar active-region filament from quasi-static state to eruption: rolling motion, untwisting motion, material transfer, and chirality
Authors:
X. L. Yan,
Q. L. Li,
G. R. Chen,
Z. K. Xue,
L. Feng,
J. C. Wang,
L. H. Yang,
Y. Zhang
Abstract:
To better understand magnetic structure and eruptive process of solar filaments, a solar active-region filament (labeled F2) eruption associated with a B-class flare was investigated by using high-resolution H$α$ data from the 1 m New Vacuum Solar Telescope (NVST), combined with EUV observations of the Solar Dynamical Observatory (SDO). The filament F2 was disturbed by another filament (labeled F1…
▽ More
To better understand magnetic structure and eruptive process of solar filaments, a solar active-region filament (labeled F2) eruption associated with a B-class flare was investigated by using high-resolution H$α$ data from the 1 m New Vacuum Solar Telescope (NVST), combined with EUV observations of the Solar Dynamical Observatory (SDO). The filament F2 was disturbed by another filament (labeled F1) eruption that experienced a whip-like motion. Before the filament F2 eruption, the Dopplergrams show that the southern and the northern parts of the filament F2 body exhibit blueshift and redshift along the filament spine, simultaneously. It implies that the filament F2 was rolling from one side to the other. During the filament F2 eruption, the Doppler velocity shifts of the filament body are opposite to that before its eruption. It demonstrates that the filament body exhibits an untwisting motion, which can be also identified by tracing the movement of the eruptive filament threads. Moreover, it is found that the material of the filament F2 was transferred to the surrounding magnetic field loops, which is caused by magnetic reconnection between the filament F2 and the surrounding magnetic loops. According to the right-bearing threads of the filament F2 before its eruption, it can be deduced that the filament F2 is initially supported by a sheared arcade. The following observations reveal that the twisted magnetic structure of the filament F2 formed in the eruption phase.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Benchmarking boron carbide equation of state using computation and experiment
Authors:
Shuai Zhang,
Michelle C. Marshall,
Lin H. Yang,
Philip A. Sterne,
Burkhard Militzer,
Markus Daene,
James A. Gaffney,
Andrew Shamp,
Tadashi Ogitsu,
Kyle Caspersen,
Amy E. Lazicki,
David Erskine,
Richard A. London,
Peter M. Celliers,
Joseph Nilsen,
Heather D. Whitley
Abstract:
Boron carbide (B$_4$C) is of both fundamental scientific and practical interest in inertial confinement fusion (ICF) and high energy density physics experiments. We report the results of a comprehensive computational study of the equation of state (EOS) of B$_4$C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up t…
▽ More
Boron carbide (B$_4$C) is of both fundamental scientific and practical interest in inertial confinement fusion (ICF) and high energy density physics experiments. We report the results of a comprehensive computational study of the equation of state (EOS) of B$_4$C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up to 61 megabar from planar shock experiments performed at the National Ignition Facility (NIF). Our computational methods include path integral Monte Carlo, activity expansion, as well as all-electron Green's function Korringa-Kohn-Rostoker and molecular dynamics that are both based on density functional theory. We calculate the pressure-internal energy EOS of B$_4$C over a broad range of temperatures ($\sim$6$\times$10$^3$--5$\times$10$^8$ K) and densities (0.025--50 g/cm$^{3}$). We assess that the largest discrepancies between theoretical predictions are $\lesssim$5% near the compression maximum at 1--2$\times10^6$ K. This is the warm-dense state in which the K shell significantly ionizes and has posed grand challenges to theory and experiment. By comparing with different EOS models, we find a Purgatorio model (LEOS 2122) that agrees with our calculations. The maximum discrepancies in pressure between our first-principles predictions and LEOS 2122 are $\sim$18% and occur at temperatures between 6$\times$10$^3$--2$\times$10$^5$ K, which we believe originate from differences in the ion thermal term and the cold curve that are modeled in LEOS 2122 in comparison with our first-principles calculations. In addition, we have developed three new equation of state models and applied them to 1D hydrodynamic simulations of a polar direct-drive NIF implosion, demonstrating that these new models are now available for future ICF design studies.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Triggering mechanism and material transfer of a failed solar filament eruption
Authors:
X. L. Yan,
Z. K. Xue,
X. Cheng,
J. Zhang,
J. C. Wang,
D. F. Kong,
L. H. Yang,
G. R. Chen,
X. S. Feng
Abstract:
Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$α$ images from the N…
▽ More
Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$α$ images from the New Vacuum Solar Telescope (NVST), supplemented by EUV observations of the Solar Dynamical Observatory (SDO). Before the filament eruption, a small bi-pole magnetic field emerged below the filament. And then magnetic reconnection between the filament and the emerging bi-pole magnetic field triggered the filament eruption. During the filament eruption, the untwisting motion of the filament can be clearly traced by the eruptive threads. Moreover, the foot-points of the eruptive threads are determined by tracing the descending filament materials. Note that the filament twisted structure and the right part of the eruptive filament threads cannot be seen before the filament eruption. These eruptive threads at the right part of the filament are found to be rooting in the weak negative polarities near the main negative sunspot. Moreover, a new filament formed in the filament channel due to material injection from the eruptive filament. The above observations and the potential field extrapolations are inclined to support that the filament materials were transferred into the overlying magnetic loops and the nearby filament channel by magnetic reconnection. These observations shed light on better understanding on the complexity of filament eruptions.
△ Less
Submitted 15 December, 2019;
originally announced December 2019.
-
A Comparative Study on Monte Carlo Simulations of Electron Emission from Liquid Water
Authors:
M. Mehnaz,
L. H. Yang,
Y. B. Zou,
B. Da,
S. F. Mao,
Z. J. Ding
Abstract:
Liquid water has been proved to be an excellent medium for specimen structure imaging by a scanning electron microscope. Knowledge of electron-water interaction physics and particularly the secondary electron yield is essential to the interpretation of the imaging contrast. However, very little is known up to now experimentally on the low energy electron interaction with liquid water because of ce…
▽ More
Liquid water has been proved to be an excellent medium for specimen structure imaging by a scanning electron microscope. Knowledge of electron-water interaction physics and particularly the secondary electron yield is essential to the interpretation of the imaging contrast. However, very little is known up to now experimentally on the low energy electron interaction with liquid water because of certain practical limitations. It is then important to gain some useful information about electron emission from water by a Monte Carlo (MC) simulation technique that can numerically model electron transport trajectories in water. In this study, we have performed MC simulations of electron emission from liquid water in the primary energy range of 50 eV-30 keV by using two different codes, i.e. a classical MC (CMC) code developed in our laboratory and the Geant4-DNA (G4DNA) code. The calculated secondary electron yield and electron backscattering coefficient are compared with experimental results wherever applicable to verify the validity of physical models for the electron-water interaction. The secondary electron yield vs. primary energy curves calculated by the two codes present the same generic curve shape as that of metals but in rather different absolute values. G4DNA yields the underestimated absolute values due to the application of one step thermalization model by setting a cutoff energy at 7.4 eV so that the low energy losses due to phonon excitations are omitted. Our CMC calculation of secondary electron yield is closer to the experimental data and the energy distribution is reasonable. It is concluded that a full dielectric function data at low energy loss values below 7.4 eV shall be employed in G4DNA model for the modeling of low energy electrons.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Equation of state of warm-dense boron nitride combining computation, modeling, and experiment
Authors:
Shuai Zhang,
Amy Lazicki,
Burkhard Militzer,
Lin H. Yang,
Kyle Caspersen,
Jim A. Gaffney,
Markus W. Däne,
John E. Pask,
Walter R. Johnson,
Abhiraj Sharma,
Phanish Suryanarayana,
Duane D. Johnson,
Andrey V. Smirnov,
Philip A. Sterne,
David Erskine,
Richard A. London,
Federica Coppari,
Damian Swift,
Joseph Nilsen,
Art J. Nelson,
Heather D. Whitley
Abstract:
The equation of state (EOS) of materials at warm dense conditions poses significant challenges to both theory and experiment. We report a combined computational, modeling, and experimental investigation leveraging new theoretical and experimental capabilities to investigate warm-dense boron nitride (BN). The simulation methodologies include path integral Monte Carlo (PIMC), several density functio…
▽ More
The equation of state (EOS) of materials at warm dense conditions poses significant challenges to both theory and experiment. We report a combined computational, modeling, and experimental investigation leveraging new theoretical and experimental capabilities to investigate warm-dense boron nitride (BN). The simulation methodologies include path integral Monte Carlo (PIMC), several density functional theory (DFT) molecular dynamics methods [plane-wave pseudopotential, Fermi operator expansion (FOE), and spectral quadrature (SQ)], activity expansion (ACTEX), and all-electron Green's function Korringa-Kohn-Rostoker (MECCA), and compute the pressure and internal energy of BN over a broad range of densities ($ρ$) and temperatures ($T$). Our experiments were conducted at the Omega laser facility and measured the Hugoniot of BN to unprecedented pressures (12--30 Mbar). The EOSs computed using different methods cross validate one another, and the experimental Hugoniot are in good agreement with our theoretical predictions. We assess that the largest discrepancies between theoretical predictions are $<$4% in pressure and $<$3% in energy and occur at $10^6$ K. We find remarkable consistency between the EOS from DFT calculations performed on different platforms and using different exchange-correlation functionals and those from PIMC using free-particle nodes. This provides strong evidence for the accuracy of both PIMC and DFT in the warm-dense regime. Moreover, SQ and FOE data have significantly smaller error bars than PIMC, and so represent significant advances for efficient computation at high $T$. We also construct tabular EOS models and clarify the ionic and electronic structure of BN over a broad $T-ρ$ range and quantify their roles in the EOS. The tabular models may be utilized for future simulations of laser-driven experiments that include BN as a candidate ablator material.
△ Less
Submitted 2 February, 2019;
originally announced February 2019.
-
Theoretical and experimental investigation of the equation of state of boron plasmas
Authors:
Shuai Zhang,
Burkhard Militzer,
Michelle C. Gregor,
Kyle Caspersen,
Lin H. Yang,
Tadashi Ogitsu,
Damian Swift,
Amy Lazicki,
D. Erskine,
Richard A. London,
P. M. Celliers,
Joseph Nilsen,
Philip A. Sterne,
Heather D. Whitley
Abstract:
We report a theoretical equation of state (EOS) table for boron across a wide range of temperatures (5.1$\times$10$^4$-5.2$\times$10$^8$ K) and densities (0.25-49 g/cm$^3$), and experimental shock Hugoniot data at unprecedented high pressures (5608$\pm$118 GPa). The calculations are performed with full, first-principles methods combining path integral Monte Carlo (PIMC) at high temperatures and de…
▽ More
We report a theoretical equation of state (EOS) table for boron across a wide range of temperatures (5.1$\times$10$^4$-5.2$\times$10$^8$ K) and densities (0.25-49 g/cm$^3$), and experimental shock Hugoniot data at unprecedented high pressures (5608$\pm$118 GPa). The calculations are performed with full, first-principles methods combining path integral Monte Carlo (PIMC) at high temperatures and density functional theory molecular dynamics (DFT-MD) methods at lower temperatures. PIMC and DFT-MD cross-validate each other by providing coherent EOS (difference $<$1.5 Hartree/boron in energy and $<$5% in pressure) at 5.1$\times$10$^5$ K. The Hugoniot measurement is conducted at the National Ignition Facility using a planar shock platform. The pressure-density relation found in our shock experiment is on top of the shock Hugoniot profile predicted with our first-principles EOS and a semi-empirical EOS table (LEOS 50). We investigate the self diffusivity and the effect of thermal and pressure-driven ionization on the EOS and shock compression behavior in high pressure and temperature conditions We study the performance sensitivity of a polar direct-drive exploding pusher platform to pressure variations based on comparison of the first-principles calculations with LEOS 50 via 1D hydrodynamic simulations. The results are valuable for future theoretical and experimental studies and engineering design in high energy density research. (LLNL-JRNL-748227)
△ Less
Submitted 30 April, 2018;
originally announced April 2018.
-
Anharmonicity-induced isostructural phase transition of Zirconium under pressure
Authors:
Elissaios Stavrou,
Lin H. Yang,
Per Soderlind,
Daniel Aberg,
Harry B. Radousky,
Michael R. Armstrong,
Jonathan L. Belof,
Martin Kunz,
Eran Greenberg,
Vitali B. Prakapenka,
David A. Young
Abstract:
We have performed a detailed x-ray diffraction structural study of Zr under pressure and unambiguously identify the existence of a first-order isostructural bcc-to-bcc phase transition near 58 GPa. First-principles quantum molecular dynamics lattice dynamics calculations support the existence of this phase transition, in excellent agreement with experimental results, triggered by anharmonic effect…
▽ More
We have performed a detailed x-ray diffraction structural study of Zr under pressure and unambiguously identify the existence of a first-order isostructural bcc-to-bcc phase transition near 58 GPa. First-principles quantum molecular dynamics lattice dynamics calculations support the existence of this phase transition, in excellent agreement with experimental results, triggered by anharmonic effects. Our results highlight the potential ubiquity of anharmonically driven isostructural transitions within the periodic table under pressure and calls for follow-up experimental and theoretical studies.
△ Less
Submitted 7 April, 2018;
originally announced April 2018.
-
Simultaneous observation of a flux rope eruption and magnetic reconnection during an X-class solar flare
Authors:
X. L. Yan,
L. H. Yang,
Z. K. Xue,
Z. X. Mei,
D. F. Kong,
J. C. Wang,
Q. L. Li
Abstract:
In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well obse…
▽ More
In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well observed in 131 Å observation. The scenario that can be created from these observations is very consistent with the predictions of some eruptive models. Except for the characteristics mentioned above in the process of the flare predicted by classical eruption models, the current sheet separating into several small current sheets is also observed at the final stage of the flux rope eruption. The quantitative calculation of the velocities and accelerations of the inflow, hot cusp structure, and post-flare loops is presented. The width of the current sheet is estimated to be about 3 $\times$ $10^{3}$ km. These observations are very useful to understand the process of solar eruptions.
△ Less
Submitted 8 January, 2018;
originally announced January 2018.
-
Successive X-class flares and coronal mass ejections driven by shearing motion and sunspot rotation in active region NOAA 12673
Authors:
X. L. Yan,
J. C. Wang,
G. M. Pan,
D. F. Kong,
Z. K. Xue,
L. H. Yang,
Q. L. Li,
X. S. Feng
Abstract:
We present a clear case study on the occurrence of two successive X-class flares including a decade-class flare (X9.3) and two coronal mass ejections (CMEs) triggered by shearing motion and sunspot rotation in active region NOAA 12673 on 2017 September 6. A shearing motion between the main sunspots with opposite polarities started on September 5 and even lasted after the second X-class flare on Se…
▽ More
We present a clear case study on the occurrence of two successive X-class flares including a decade-class flare (X9.3) and two coronal mass ejections (CMEs) triggered by shearing motion and sunspot rotation in active region NOAA 12673 on 2017 September 6. A shearing motion between the main sunspots with opposite polarities started on September 5 and even lasted after the second X-class flare on September 6. Moreover, the main sunspot with negative polarity rotated around its umbral center and another main sunspot with positive polarity also exhibited a slow rotation. The sunspot with negative polarity at the northwest of active region also began to rotate counter-clockwise before the onset of the first X-class flare. The successive formation and eruption of two S-shaped structures were closely related to the counter-clockwise rotation of three sunspots. It is also found that the rotation of sunspots is faster during four hours prior to the onset of the flares than the period before. The existence of a flux rope is found prior to the onset of two flares by using non-linear force free field extrapolation based on the vector magnetograms observed by SDO/HMI. These results suggest that shearing motion and sunspot rotation play an important role in the buildup of the free energy and the formation of flux ropes in the corona which produces solar flares and CMEs.
△ Less
Submitted 17 February, 2018; v1 submitted 7 January, 2018;
originally announced January 2018.
-
The eruption of a small-scale emerging flux rope as the driver of an M-class flare and a coronal mass ejection
Authors:
X. L. Yan,
C. W. Jiang,
Z. K. Xue,
J. C. Wang,
E. R. Priest,
L. H. Yang,
D. F. Kong,
W. D. Cao,
H. S. Ji
Abstract:
Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-…
▽ More
Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force free field (NLFFF) extrapolation as well as data-driven MHD modeling of the dynamic evolution of the coronal 3D magnetic field. During the emergence of the flux rope, rotation of satellite sunspots at the footpoints of the flux rope was observed. Meanwhile, the Lorentz force, magnetic energy, vertical current, and transverse fields were increasing during this phase. The free energy from the magnetic flux emergence and twisting magnetic fields is sufficient to power the M-class flare. These observations for the first time present the complete process from the emergence of the small-scale flux rope to the production of solar eruptions.
△ Less
Submitted 30 June, 2017;
originally announced July 2017.
-
The formation of an inverse S-shaped active-region filament driven by sunspot motion and magnetic reconnection
Authors:
X. L. Yan,
E. R. Priest,
Q. L. Guo,
Z. K. Xue,
J. C. Wang,
L. H. Yang
Abstract:
We present a detailed study of the formation of an inverse S-shaped filament prior to its eruption in active region NOAA 11884 from October 31 to November 2, 2013. In the initial stage, clockwise rotation of a small positive sunspot around the main negative trailing sunspot formed a curved filament. Then the small sunspot cancelled with negative magnetic flux to create a longer active-region filam…
▽ More
We present a detailed study of the formation of an inverse S-shaped filament prior to its eruption in active region NOAA 11884 from October 31 to November 2, 2013. In the initial stage, clockwise rotation of a small positive sunspot around the main negative trailing sunspot formed a curved filament. Then the small sunspot cancelled with negative magnetic flux to create a longer active-region filament with an inverse S-shape. At the cancellation site a brightening was observed in UV and EUV images and bright material was transferred to the filament. Later the filament erupted after cancellation of two opposite polarities under the upper part of the filament. Nonlinear force-free field (NLFFF) extrapolation of vector photospheric fields suggests that the filament may have a twisted structure, but this cannot be confirmed from the current observations.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Fine-scale structures and material flows of quiescent filaments observed by New Vacuum Solar Telescope
Authors:
X. L. Yan,
Z. K. Xue,
Y. Y. Xiang,
L. H. Yang
Abstract:
Study on the small-scale structures and material flows of solar quiescent filaments is very important for understanding the formation and equilibrium of solar filaments. Using the high resolution Hα data observed by the New Vacuum Solar Telescope (NVST), we present the structures of the barbs and the material flows along the threads across the spine in two quiescent filaments on 2013 September 29…
▽ More
Study on the small-scale structures and material flows of solar quiescent filaments is very important for understanding the formation and equilibrium of solar filaments. Using the high resolution Hα data observed by the New Vacuum Solar Telescope (NVST), we present the structures of the barbs and the material flows along the threads across the spine in two quiescent filaments on 2013 September 29 and on 2012 November 2, respectively. During the evolution of the filament barb, several parallel tube-shaped structures formed and the width of the structures ranges from about 2.3 Mm to 3.3 Mm. The parallel tube-shaped structures merged together accompanied with the material flows from the spine to the barb. Moreover, the boundary between the barb and surrounding atmosphere is very neat. The counter-streaming flows were not found to appear alternately in the adjacent threads of the filament. However, the large-scale patchy counter-streaming flows are detected in the filament. The flows in one patch of the filament have the same direction and the flows in the adjacent patch have opposite directions. The patches of two opposite flows with a size of about ten arcseconds exhibited alternately along the spine of the filament. The velocity of these material flows ranges from 5.6 km/s to 15.0 km/s. The material flows along the threads of the filament did not change their direction for about two hours and fourteen minutes during the evolution of the filament. Our results confirm that the large-scale counter-streaming flows with the certain width along the threads of solar filaments exist and are well coaligned with the threads.
△ Less
Submitted 12 February, 2015;
originally announced February 2015.
-
Spintronic properties and stability of the half-Heusler alloys LiMnZ (Z=N, P, Si)
Authors:
L. Damewood,
B. Busemeyer,
M. Shaughnessy,
C. Y. Fong,
L. H. Yang,
C. Felser
Abstract:
Li-based half-Heusler alloys have attracted much attention due to their potential applications in optoelectronics and because they carry the possibility of exhibiting large magnetic moments for spintronic applications. Due to their similarities to metastable zinc blende half-metals, the half-Heusler alloys $β$-LiMnZ (Z = N, P and Si) were systematically examined for their electric, magnetic and st…
▽ More
Li-based half-Heusler alloys have attracted much attention due to their potential applications in optoelectronics and because they carry the possibility of exhibiting large magnetic moments for spintronic applications. Due to their similarities to metastable zinc blende half-metals, the half-Heusler alloys $β$-LiMnZ (Z = N, P and Si) were systematically examined for their electric, magnetic and stability properties at optimized lattice constants and strained lattice constants that exhibit half-metallic properties. Other phases of the half-Heusler structure ($α$ and $γ$) are also reported here, but they are unlikely to be grown. The magnetic moments of these stable Li-based alloys are expected to reach as high as 4 $μ_{\mathrm{B}}$ per unit cell when Z = Si and 5 $μ_{\mathrm{B}}$ per unit cell when Z = N and P, however the antiferromagnetic spin configuration is energetically favored when Z is a pnictogen. $β$-LiMnSi at a lattice constant 14\% larger than its equilibrium lattice constant is a promising half-metal for spintronic applications due to its large magnetic moment and vibrational stability. The modified Slater--Pauling rule for these alloys is determined. Finally, a plausible method for develo** half-metallic Li$_x$MnZ at equilibrium, by tuning $x$, is investigated, but, unlike tetragonalization, this type of alloying introduces local structural changes that destroy the half-metallicity.
△ Less
Submitted 3 November, 2014; v1 submitted 27 January, 2013;
originally announced January 2013.
-
First principles studies of a Xe atom adsorbed on Nb(110) surface
Authors:
S. Dag,
M. Shaughnessy,
C. Y. Fong,
X. D. Zhu,
L. H. Yang
Abstract:
We study adsorption sites of a single Xe adatom on Nb(110) surface using a density functional theory approach: The on-top site is the most favorable position for the adsorption. We compare the binding features of the present study to earlier studies of a Xe adatom on close-packed (111) surface of face-centered cubic metals. The different features are attributed through a microscopic picture to the…
▽ More
We study adsorption sites of a single Xe adatom on Nb(110) surface using a density functional theory approach: The on-top site is the most favorable position for the adsorption. We compare the binding features of the present study to earlier studies of a Xe adatom on close-packed (111) surface of face-centered cubic metals. The different features are attributed through a microscopic picture to the less than half filled d-states in Nb.
△ Less
Submitted 22 January, 2012;
originally announced January 2012.
-
Why isn't the solar constant a constant?
Authors:
K. J. Li,
W. Feng,
J. C. Xu,
P. X. Gao,
L. H. Yang,
H. F. Liang,
L. S. Zhan
Abstract:
In order to probe the mechanism of variations of the Solar Constant on the inter-solar-cycle scale, total solar irradiance (TSI, the so-called Solar Constant) in the time interval of 7 November 1978 to 20 September 2010 is decomposed into three components through the empirical mode decomposition and time-frequency analyses. The first component is the rotation signal, counting up to 42.31% of the t…
▽ More
In order to probe the mechanism of variations of the Solar Constant on the inter-solar-cycle scale, total solar irradiance (TSI, the so-called Solar Constant) in the time interval of 7 November 1978 to 20 September 2010 is decomposed into three components through the empirical mode decomposition and time-frequency analyses. The first component is the rotation signal, counting up to 42.31% of the total variation of TSI, which is understood to be mainly caused by large magnetic structures, including sunspot groups. The second is an annual-variation signal, counting up to 15.17% of the total variation, the origin of which is not known at this point in time. Finally, the third is the inter-solar-cycle signal, counting up to 42.52%, which are inferred to be caused by the network magnetic elements in quiet regions, whose magnetic flux ranges from $(4.27-38.01)\times10^{19}$ Mx.
△ Less
Submitted 3 January, 2012;
originally announced January 2012.
-
Comparison of two structures for transition-metal-based half Heusler alloys exhibiting fully compensated half metallicity
Authors:
Michael Shaughnessy,
C. Y. Fong,
Lin H. Yang,
Claudia Felser
Abstract:
We search for new fully compensated half metals, in which only one electronic spin channel is conducting and there exists no net magnetic moment. We focus on half Heusler alloys and we examine the physical consequence of different crystal structures found in the literature for these compounds, XMnZ, with a transition metal element, such as Cr, Mn, and Fe for X and a nonmetallic element, such as P,…
▽ More
We search for new fully compensated half metals, in which only one electronic spin channel is conducting and there exists no net magnetic moment. We focus on half Heusler alloys and we examine the physical consequence of different crystal structures found in the literature for these compounds, XMnZ, with a transition metal element, such as Cr, Mn, and Fe for X and a nonmetallic element, such as P, Sb and Si for Z. The structures differ in the placement of voids in the L2$_1$ structure of the full Heulser alloy. One structure has the void at (1/4, 3/4, 1/4)a and the other places the void at (0.0, 0.0, 1/2)a. The first structure is expected to have greater d-p hybridization between Mn and the Z atom. The other exhibits strong d-d hybridization between the nearest neighboring transition metal elements. Five XMnZ compounds are considered along with the previously studied CrMnSb in the second structure, which serves as a reference. Besides the CrMnSb, only one other alloy, MnMnSi, shows fully compensated half metallic properties in both structures. Both these alloys obey the Slater-Pauling electron counting rule for half Hesuler alloys. The differences between CrMnSb and MnMnSi in the two structures are discussed based on their atomic properties. In the search for fully compensated half metals in transition metal-based half Heusler alloys, we suggest using the counting rule as a guide.
△ Less
Submitted 18 August, 2011;
originally announced August 2011.
-
Studies of single do** of Mn and Fe in Si to deduce simple guidelines in selecting transition metal elements for growing Si-based spintronic materials
Authors:
Michael Shaughnessy,
C. Y. Fong,
Ryan Snow,
L. H. Yang,
X. S. Chen,
Z. M. Zhiang
Abstract:
Single do**s of Mn and Fe in Si are investigated using 8-, 64-, and 216-atom supercells and a first-principles method based on density functional theory. Between the two transition metal elements (TMEs), atom sizes play an essential role in determining the contraction or the expansion of neighboring atoms around the TME dopant at a substitutional site. At a tetrahedral interstitial site, there i…
▽ More
Single do**s of Mn and Fe in Si are investigated using 8-, 64-, and 216-atom supercells and a first-principles method based on density functional theory. Between the two transition metal elements (TMEs), atom sizes play an essential role in determining the contraction or the expansion of neighboring atoms around the TME dopant at a substitutional site. At a tetrahedral interstitial site, there is only expansion. Magnetic moments/TME at the two sites are calculated. Physical origins for these inter-related properties are discussed. A few suggestions about the growth of these Si-based alloys are given.
△ Less
Submitted 18 August, 2011; v1 submitted 20 November, 2009;
originally announced November 2009.
-
Origin of large moments in Mn$_x$Si$_{1-x}$ at small x
Authors:
Michael Shaughnessy,
C. Y. Fong,
Ryan Snow,
Kai Liu,
John Pask,
Lin H. Yang
Abstract:
Recently, the magnetic moment/Mn, $M$, in Mn$_x$Si$_{1-x}$ was measured to be 5.0 $μ_B$/Mn, at $x$ =0.1%. To understand this observed $M$, we investigate several Mn$_x$Si$_{1-x}$ models of alloys using first-principles density functional methods. The only model giving $M = 5.0$ was a 513-atom cell having the Mn at a substitutional site, and Si at a second-neighbor interstitial site. The observed…
▽ More
Recently, the magnetic moment/Mn, $M$, in Mn$_x$Si$_{1-x}$ was measured to be 5.0 $μ_B$/Mn, at $x$ =0.1%. To understand this observed $M$, we investigate several Mn$_x$Si$_{1-x}$ models of alloys using first-principles density functional methods. The only model giving $M = 5.0$ was a 513-atom cell having the Mn at a substitutional site, and Si at a second-neighbor interstitial site. The observed large moment is a consequence of the weakened d-p hybridization between the Mn and one of its nearest neighbor Si atoms, resulting from the introduction of the second-neighbor interstitial Si. Our result suggests a way to tune the magnetic moments of transition metal doped semiconductors.
△ Less
Submitted 18 June, 2009;
originally announced June 2009.
-
Half metallic digital ferromagnetic heterostructure composed of a $δ$-doped layer of Mn in Si
Authors:
M. C. Qian,
C. Y. Fong,
Kai Liu,
Warren E. Pickett,
J. E. Pask,
L. H. Yang
Abstract:
We propose and investigate the properties of a digital ferromagnetic heterostructure (DFH) consisting of a $δ$-doped layer of Mn in Si, using \textit{ab initio} electronic-structure methods. We find that (i) ferromagnetic order of the Mn layer is energetically favorable relative to antiferromagnetic, and (ii) the heterostructure is a two-dimensional half metallic system. The metallic behavior is…
▽ More
We propose and investigate the properties of a digital ferromagnetic heterostructure (DFH) consisting of a $δ$-doped layer of Mn in Si, using \textit{ab initio} electronic-structure methods. We find that (i) ferromagnetic order of the Mn layer is energetically favorable relative to antiferromagnetic, and (ii) the heterostructure is a two-dimensional half metallic system. The metallic behavior is contributed by three majority-spin bands originating from hybridized Mn-$d$ and nearest-neighbor Si-$p$ states, and the corresponding carriers are responsible for the ferromagnetic order in the Mn layer. The minority-spin channel has a calculated semiconducting gap of 0.25 eV. Analysis of the total and partial densities of states, band structure, Fermi surfaces and associated charge density reveals the marked two-dimensional nature of the half metallicity. The band lineup is found to be favorable for retaining the half metal character to near the Curie temperature ($T_{C}$). Being Si based and possibly having a high $T_{C}$ as suggested by an experiment on dilutely doped Mn in Si, the heterostructure may be of special interest for integration into mature Si technologies for spintronic applications.
△ Less
Submitted 28 November, 2005; v1 submitted 10 August, 2005;
originally announced August 2005.
-
Structural and electronic properties of pentacene molecule and molecular pentacene solid
Authors:
R. G. Endres,
C. Y. Fong,
L. H. Yang,
G. Witte,
Ch. Woll
Abstract:
The structural and electronic properties of a single pentacene molecule and a pentacene molecular crystal, an organic semiconductor, are examined by a first-principles method based on the generalized gradient approximation of density functional theory. Calculations were carried out for a triclinic unit cell containing two pentacene molecules. The bandwidths of the valence and conduction bands wh…
▽ More
The structural and electronic properties of a single pentacene molecule and a pentacene molecular crystal, an organic semiconductor, are examined by a first-principles method based on the generalized gradient approximation of density functional theory. Calculations were carried out for a triclinic unit cell containing two pentacene molecules. The bandwidths of the valence and conduction bands which determine the charge migration mechanism are found to depend strongly on the crystallographic direction. Along the triclinic reciprocal lattice vectors A and B which are orientated approximately perpendicular to the molecular axes the maximal valence (conduction) band width amounts to only 75 (59) meV, even smaller values are obtained for the C direction parallel to molecular axes even less. Along the stacking directions A+B and A-B, however, the maximal valence (conduction) band width is found to reach 145 (260) meV. The value for the conduction band width is larger than estimates for the polaron binding energy but significantly smaller than recent results obtained by semiempirical methods. The single molecule has a HOMO-LUMO gap of about 1.1 eV as deduced from the Kohn-Sham eigenvalue differences. When using the self-consistent field method, which is expected to yield more reliable results, a value of 1.64 eV is obtained. The theoretical value for the band gap in the molecular solid amounts to 1.0 eV at the Gamma-point.
△ Less
Submitted 19 November, 2002;
originally announced November 2002.