-
The Energy Budget in the Jet of High-frequency Peaked BL Lacertae Objects
Authors:
X. Z. Zhao,
H. Y. Yang,
Y. G. Zheng,
S. J. Kang
Abstract:
Energy equipartition and the energy budget in the jet are import issues for the radiation mechanism of blazars. Early work predominantly concentrated on flat-spectrum radio quasars and a limited number of BL Lacertae objects (BL Lacs). In this paper, we compile 348 high-frequency peaked BL Lac objects (HBLs) based on the catalog of active galactic nuclei (4LAC-DR3) from Fermi-LAT, and employ \text…
▽ More
Energy equipartition and the energy budget in the jet are import issues for the radiation mechanism of blazars. Early work predominantly concentrated on flat-spectrum radio quasars and a limited number of BL Lacertae objects (BL Lacs). In this paper, we compile 348 high-frequency peaked BL Lac objects (HBLs) based on the catalog of active galactic nuclei (4LAC-DR3) from Fermi-LAT, and employ \textit{JetSet} to fit the spectral energy distributions (SEDs) of these HBLs in the framework of the one-zone lepton model. We aim to determine whether the energy budget is reasonable and whether the energy equipartition is satisfied in HBLs. The results of the statistical analysis suggest that: (1) SEDs of HBLs can be reproduced well by using the one-zone lepton model; however it cannot achieve the energy equalization, and the relativistic electron energy density is far greater than the magnetic field energy density, $U_{e} \gtrsim100 U_{B}$; (2) the majority of the HBLs are located in the $t_{cool}$$<$$t_{dyn}$ region (where the horizontal coordinate represents the jet power of electrons, while the ordinate indicates the ratio between the dynamic time scale to the cooling timescale), and the jet kinetic power of HBLs is greater than the jet power of radiation; there is a very low radiation efficiency, we deduce that HBLs may have optically thin advection-dominated accretion flows; (3) the $\logε_{B}$ of HBLs is less than zero, which indicates that the jet kinetic power of HBLs is not affected by Poynting flux; (4) the relationships with $U_{e} >U_{Syn}\sim U_{B}$, $L_{e}\sim L_{p}>L_{B}\sim L_{rad}$ and $\logε_{e}>0.5$ are established. These relations indicate that most of the energy of HBLs is stored in the population of low-energy electrons.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Towards Sustainable Ultrawide Bandgap Van der Waals Materials: An ab initio Screening Effort
Authors:
Chuin Wei Tan,
Linqiang Xu,
Chen Chen Er,
Siang-Piao Chai,
Boris Kozinsky,
Hui Ying Yang,
Shengyuan A. Yang,
**g Lu,
Yee Sin Ang
Abstract:
The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are un…
▽ More
The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are under threat of depletion and pose elevated risks to the environment. The role of material-level sustainability in computational screening efforts remains an open question thus far. Here we develop a general van der Waals materials screening framework imbued with sustainability-motivated search criteria. Using ultrawide bandgap (UWBG) materials as a backdrop -- an emerging materials class with great prospects in dielectric, power electronics, and ultraviolet device applications, we demonstrate how this screening framework results in 25 sustainable UWBG layered materials comprising only of low-risks elements. Our findings constitute a critical first-step towards reinventing a more sustainable electronics landscape beyond silicon, with the framework established in this work serving as a harbinger of sustainable 2D materials discovery.
△ Less
Submitted 25 October, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Coupling between Antiferromagnetic and Spin Glass Orders in the Quasi-One-Dimensional Iron Telluride TaFe$_{1+x}$Te$_3$ ($x$=0.25)
Authors:
Y. Liu,
J. J. Bao,
C. Q. Xu,
W. H. Jiao,
H. Zhang,
L. C. Xu,
Zengwei Zhu,
H. Y. Yang,
Yonghui. Zhou,
Z. Ren,
P. K. Biswas,
S. K. Ghosh,
Zhaorong Yang,
X. Ke,
G. H. Cao,
Xiaofeng Xu
Abstract:
Understanding the interplay among different magnetic exchange interactions and its physical consequences, especially in the presence of itinerant electrons and disorders, remains one of the central themes in condensed matter physics. In this vein, the coupling between antiferromagnetic and spin glass orders may lead to large exchange bias, a property of potential broad technological applications.…
▽ More
Understanding the interplay among different magnetic exchange interactions and its physical consequences, especially in the presence of itinerant electrons and disorders, remains one of the central themes in condensed matter physics. In this vein, the coupling between antiferromagnetic and spin glass orders may lead to large exchange bias, a property of potential broad technological applications. In this article, we report the coexistence of antiferromagnetic order and spin glass behaviors in a quasi-one-dimensional iron telluride TaFe$_{1+x}$Te$_3$ ($x$=0.25). Its antiferromagnetism is believed to arise from the antiferromagnetic interchain coupling between the ferromagnetically aligned FeTe chains along the $b$-axis, while the spin glassy state stems from the disordered Fe interstitials. This dichotomic role of chain and interstitial sublattices is responsible for the large exchange bias observed at low temperatures, with the interstitial Fe acting as the uncompensated moment and its neighboring Fe chain providing the source for its pinning. This iron-based telluride may thereby represent a new paradigm to study the large family of transition metal chalcogenides whose magnetic order or even the dimensionality can be tuned to a large extent, forming a fertile playground to manipulate or switch the spin degrees of freedom thereof.
△ Less
Submitted 22 September, 2021;
originally announced September 2021.
-
Designing Efficient Metal Contacts to Two-Dimensional Semiconductors MoSi$_2$N$_4$ and WSi$_2$N$_4$ Monolayers
Authors:
Qianqian Wang,
Liemao Cao,
Shi-Jun Liang,
Weikang Wu,
Guangzhao Wang,
Ching Hua Lee,
Wee Liat Ong,
Hui Ying Yang,
Lay Kee Ang,
Shengyuan A. Yang,
Yee Sin Ang
Abstract:
Metal contacts to two-dimensional (2D) semiconductors are ubiquitous in modern electronic and optoelectronic devices. Such contacts are, however, often plagued by strong Fermi level pinning (FLP) effect which reduces the tunability of the Schottky barrier height (SBH) and degrades the performance of 2D-semiconductor-based devices. In this work, we show that monolayer MoSi$_2$N$_4$ and WSi$_2$N…
▽ More
Metal contacts to two-dimensional (2D) semiconductors are ubiquitous in modern electronic and optoelectronic devices. Such contacts are, however, often plagued by strong Fermi level pinning (FLP) effect which reduces the tunability of the Schottky barrier height (SBH) and degrades the performance of 2D-semiconductor-based devices. In this work, we show that monolayer MoSi$_2$N$_4$ and WSi$_2$N$_4$ - a recently synthesized 2D material class with exceptional mechanical and electronic properties - exhibit strongly suppressed FLP and wide-range tunable SBH when contacted by metals. An exceptionally large SBH slope parameter of S=0.7 is obtained, which outperform the vast majority of other 2D semiconductors. Such surprising behavior arises from the unique morphology of MoSi$_2$N$_4$ and WSi$_2$N$_4$. The outlying Si-N layer forms a native atomic layer that protects the semiconducting inner-core from the perturbance of metal contacts, thus suppressing the FLP. Our findings reveal the potential of MoSi$_2$N$_4$ and WSi$_2$N$_4$ monolayers as a novel 2D material platform for designing high-performance and energy-efficient 2D nanodevices.
△ Less
Submitted 23 December, 2020; v1 submitted 14 December, 2020;
originally announced December 2020.
-
CMB-S4: Forecasting Constraints on Primordial Gravitational Waves
Authors:
CMB-S4 Collaboration,
:,
Kevork Abazajian,
Graeme E. Addison,
Peter Adshead,
Zeeshan Ahmed,
Daniel Akerib,
Aamir Ali,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Mustafa A. Amin,
Adam Anderson,
Kam S. Arnold,
Peter Ashton,
Carlo Baccigalupi,
Debbie Bard,
Denis Barkats,
Darcy Barron,
Peter S. Barry,
James G. Bartlett,
Ritoban Basu Thakur,
Nicholas Battaglia,
Rachel Bean,
Chris Bebek
, et al. (212 additional authors not shown)
Abstract:
CMB-S4---the next-generation ground-based cosmic microwave background (CMB) experiment---is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. Among the science cases pursued with CMB-S4, the quest for detecting p…
▽ More
CMB-S4---the next-generation ground-based cosmic microwave background (CMB) experiment---is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. Among the science cases pursued with CMB-S4, the quest for detecting primordial gravitational waves is a central driver of the experimental design. This work details the development of a forecasting framework that includes a power-spectrum-based semi-analytic projection tool, targeted explicitly towards optimizing constraints on the tensor-to-scalar ratio, $r$, in the presence of Galactic foregrounds and gravitational lensing of the CMB. This framework is unique in its direct use of information from the achieved performance of current Stage 2--3 CMB experiments to robustly forecast the science reach of upcoming CMB-polarization endeavors. The methodology allows for rapid iteration over experimental configurations and offers a flexible way to optimize the design of future experiments given a desired scientific goal. To form a closed-loop process, we couple this semi-analytic tool with map-based validation studies, which allow for the injection of additional complexity and verification of our forecasts with several independent analysis methods. We document multiple rounds of forecasts for CMB-S4 using this process and the resulting establishment of the current reference design of the primordial gravitational-wave component of the Stage-4 experiment, optimized to achieve our science goals of detecting primordial gravitational waves for $r > 0.003$ at greater than $5σ$, or, in the absence of a detection, of reaching an upper limit of $r < 0.001$ at $95\%$ CL.
△ Less
Submitted 27 August, 2020;
originally announced August 2020.
-
Automated Measurements of Key Morphological Features of Human Embryos for IVF
Authors:
Brian D. Leahy,
Won-Dong Jang,
Helen Y. Yang,
Robbert Struyven,
Donglai Wei,
Zhe Sun,
Kylie R. Lee,
Charlotte Royston,
Liz Cam,
Yael Kalma,
Foad Azem,
Dalit Ben-Yosef,
Hanspeter Pfister,
Daniel Needleman
Abstract:
A major challenge in clinical In-Vitro Fertilization (IVF) is selecting the highest quality embryo to transfer to the patient in the hopes of achieving a pregnancy. Time-lapse microscopy provides clinicians with a wealth of information for selecting embryos. However, the resulting movies of embryos are currently analyzed manually, which is time consuming and subjective. Here, we automate feature e…
▽ More
A major challenge in clinical In-Vitro Fertilization (IVF) is selecting the highest quality embryo to transfer to the patient in the hopes of achieving a pregnancy. Time-lapse microscopy provides clinicians with a wealth of information for selecting embryos. However, the resulting movies of embryos are currently analyzed manually, which is time consuming and subjective. Here, we automate feature extraction of time-lapse microscopy of human embryos with a machine-learning pipeline of five convolutional neural networks (CNNs). Our pipeline consists of (1) semantic segmentation of the regions of the embryo, (2) regression predictions of fragment severity, (3) classification of the developmental stage, and object instance segmentation of (4) cells and (5) pronuclei. Our approach greatly speeds up the measurement of quantitative, biologically relevant features that may aid in embryo selection.
△ Less
Submitted 20 July, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
Electrical Contact between an Ultrathin Topological Dirac Semimetal and a Two-Dimensional Material
Authors:
Liemao Cao,
Guanghui Zhou,
Qingyun Wu,
Shengyuan A. Yang,
Hui Ying Yang,
Yee Sin Ang,
L. K. Ang
Abstract:
Ultrathin films of topological Dirac semimetal, Na$_3$Bi, has recently been revealed as an unusual electronic materials with field-tunable topological phases. Here we investigate the electronic and transport properties of ultrathin Na$_3$Bi as an electrical contact to two-dimensional (2D) metal, i.e. graphene, and 2D semiconductor, i.e. MoS$_2$ and WS$_2$ monolayers. Using combined first-principle…
▽ More
Ultrathin films of topological Dirac semimetal, Na$_3$Bi, has recently been revealed as an unusual electronic materials with field-tunable topological phases. Here we investigate the electronic and transport properties of ultrathin Na$_3$Bi as an electrical contact to two-dimensional (2D) metal, i.e. graphene, and 2D semiconductor, i.e. MoS$_2$ and WS$_2$ monolayers. Using combined first-principle density functional theory and nonequilibrium Green's function simulation, we show that the electrical coupling between Na$_3$Bi bilayer thin film and graphene results in a notable interlayer charge transfer, thus inducing sizable $n$-type do** in the Na$_3$Bi/graphene heterostructures. In the case of MoS$_2$ and WS$_2$ monolayers, the lateral Schottky transport barrier is significantly lower than many commonly studied bulk metals, thus unraveling Na$_3$Bi bilayer as a high-efficiency electrical contact material for 2D semiconductors. These findings opens up an avenue of utilizing topological semimetal thin film as electrical contact to 2D materials, and further expands the family of 2D heterostructure devices into the realm of topological materials.
△ Less
Submitted 13 May, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Electrical homogeneity of large-area chemical vapor deposited multilayer hexagonal boron nitride sheets
Authors:
Fei Hui,
Wen**g Fang,
Wei Sun Fang,
Tewa Kpulun,
Haozhe Wang,
Hui Ying Yang,
Marco A. Villena,
Gary Harris,
**g Kong,
Mario Lanza
Abstract:
Hexagonal boron nitride (h-BN) is a two dimensional (2D) layered insulator with superior dielectric performance that offers excellent interaction with other 2D materials (e.g. graphene, MoS2). Large-area h-BN can be readily grown on metallic substrates via chemical vapor deposition (CVD), but the impact of local inhomogeneities on the electrical properties of the h-BN and their effect in electroni…
▽ More
Hexagonal boron nitride (h-BN) is a two dimensional (2D) layered insulator with superior dielectric performance that offers excellent interaction with other 2D materials (e.g. graphene, MoS2). Large-area h-BN can be readily grown on metallic substrates via chemical vapor deposition (CVD), but the impact of local inhomogeneities on the electrical properties of the h-BN and their effect in electronic devices is unknown. Here it is shown that the electrical properties of h-BN stacks grown on polycrystalline Pt vary a lot depending on the crystalline orientation of the Pt grain, but within the same grain the electrical properties of the h-BN are very homogeneous. The reason is that the thickness of the CVD-grown h-BN stack is different on each Pt grain. Conductive atomic force microscopy (CAFM) maps show that the tunneling current across the h-BN stack fluctuates up to 3 orders of magnitude from one Pt grain to another. However, probe station experiments reveal that the variability of electronic devices fabricated within the same Pt grain is surprisingly small. As cutting-edge electronic devices are ultra-scaled, and as the size of the metallic substrate grains can easily exceed 100 μm (in diameter), CVD-grown h-BN stacks may be useful to fabricate electronic devices with low variability.
△ Less
Submitted 30 November, 2018;
originally announced November 2018.
-
Germagraphene as promising anode material for Lithium-ion batteries predicted from first-principles calculations
Authors:
Jun** Hu,
Chuying Ouyang,
Shengyuan A. Yang,
Hui Ying Yang
Abstract:
Finding electrode materials with high capacity is a key challenge for develo** Lithium-ion batteries (LIBs). Graphene was once expected to be a promising candidate, but it turns out to be too inert to interact with Li. Here, by using the first-principles calculations, we predict that Germanium doped graphene, termed as Germagraphene which has been achieved in recent experiment, is a promising LI…
▽ More
Finding electrode materials with high capacity is a key challenge for develo** Lithium-ion batteries (LIBs). Graphene was once expected to be a promising candidate, but it turns out to be too inert to interact with Li. Here, by using the first-principles calculations, we predict that Germanium doped graphene, termed as Germagraphene which has been achieved in recent experiment, is a promising LIB anode material. We find that at the optimal Ge concentration, which corresponds to the chemical formula C17Ge, the specific capacity for Germagraphene can be as high as 1734 mAh/g, over four times larger than graphite. We show that the material is conductive before and after Li adsorption. We also investigate the diffusion process of Li on Germagraphene, and find that the diffusion barrier is low (~0.151 eV), implying fast Li diffusion. The calculated average intercalation potential is very low (~0.03 V), which is beneficial for increasing the working voltage for the full-cells. In addition, during the process of Li intercalation, the lattice change for the material is quite small (~0.48%), implying good cycle performance. These results suggest that Germagraphene could be a promising high-capacity anode material for LIBs.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Three-dimensional honeycomb carbon: Junction line distortion and novel emergent fermions
Authors:
Jun** Hu,
Weikang Wu,
Chengyong Zhong,
Ning Liu,
Chuying Ouyang,
Hui Ying Yang,
Shengyuan A. Yang
Abstract:
Carbon enjoys a vast number of allotropic forms, each possessing unique properties determined by the lattice structures and bonding characters. Here, based on first-principles calculations, we propose a new three-dimensional carbon allotrope--hC28. We show that hC28 possesses exceptional energetic, dynamical, thermal, and mechanical stability. It is energetically more stable than most other synthe…
▽ More
Carbon enjoys a vast number of allotropic forms, each possessing unique properties determined by the lattice structures and bonding characters. Here, based on first-principles calculations, we propose a new three-dimensional carbon allotrope--hC28. We show that hC28 possesses exceptional energetic, dynamical, thermal, and mechanical stability. It is energetically more stable than most other synthesized or proposed carbon allotropes. The material has a relatively small bulk modulus, but is thermally stable at temperatures as high as 2000 K. The structural, mechanical, x-ray diffraction, and electronic properties are systematically investigated. Particularly, we show that its low-energy band structure hosts multiple unconventional emergent fermions, including the quadratic-contact-point fermions, the birefringent Dirac fermions, and the triple-point fermions. We construct effective models to characterize each kind of fermions. Our work not only discovers a new carbon allotropic form, it also reveals remarkable mechanical and electronic properties for this new material, which may pave the way towards both fundamental studies as well as practical applications.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Universal Scaling Laws in Schottky Heterostructures Based on Two-Dimensional Materials
Authors:
Yee Sin Ang,
Hui Ying Yang,
L. K. Ang
Abstract:
We identify a new universality in the carrier transport of two-dimensional(2D)-material-based Schottky heterostructures. We show that the reversed saturation current ($\mathcal{J}$) scales universally with temperature ($T$) as $ \log(\mathcal{J}/T^β) \propto -1/T$, with $β= 3/2$ for lateral Schottky heterostructures and $β= 1$ for vertical Schottky heterostructures, over a wide range of 2D systems…
▽ More
We identify a new universality in the carrier transport of two-dimensional(2D)-material-based Schottky heterostructures. We show that the reversed saturation current ($\mathcal{J}$) scales universally with temperature ($T$) as $ \log(\mathcal{J}/T^β) \propto -1/T$, with $β= 3/2$ for lateral Schottky heterostructures and $β= 1$ for vertical Schottky heterostructures, over a wide range of 2D systems including nonrelativistic electron gas, Rashba spintronic system, single and few-layer graphene, transition metal dichalcogenides and thin-films of topological solids. Such universalities originate from the strong coupling between the thermionic process and the in-plane carrier dynamics. Our model resolves some of the conflicting results from prior works and is in agreement with recent experiments. The universal scaling laws signal the breakdown of $β=2$ scaling in the classic diode equation widely-used over the past 60 years. Our findings shall provide a simple analytical scaling for the extraction of the Schottky barrier height in 2D-material-based heterostructure, thus paving way for both fundamental understanding of nanoscale interface physics and applied device engineering.
△ Less
Submitted 19 July, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
Hybrid Nodal Loop Metal: Unconventional Magnetoresponse and Material Realization
Authors:
Xiaoming Zhang,
Zhi-Ming Yu,
Yunhao Lu,
Xian-Lei Sheng,
Hui Ying Yang,
Shengyuan A. Yang
Abstract:
A nodal loop is formed by band crossing along a one-dimensional closed manifold, with each point on the loop a linear nodal point in the transverse dimensions and can be classified as type-I or type-II depending on the band dispersion. Here, we propose a class of nodal loops composed of both type-I and type-II points, which are hence termed as hybrid nodal loops. Based on firstprinciples calculati…
▽ More
A nodal loop is formed by band crossing along a one-dimensional closed manifold, with each point on the loop a linear nodal point in the transverse dimensions and can be classified as type-I or type-II depending on the band dispersion. Here, we propose a class of nodal loops composed of both type-I and type-II points, which are hence termed as hybrid nodal loops. Based on firstprinciples calculations, we predict the realization of such loops in the existing electride material Ca2As. For a hybrid loop, the Fermi surface consists of coexisting electron and hole pockets that touch at isolated points for an extended range of Fermi energies, without the need for fine-tuning. This leads to unconventional magnetic responses, including the zero-field magnetic breakdown and the momentum space Klein tunneling observable in the magnetic quantum oscillations, as well as the peculiar anisotropy in the cyclotron resonance.
△ Less
Submitted 2 February, 2018;
originally announced February 2018.
-
Coexistence of four-band nodal rings and triply-degenerate nodal points in centrosymmetric metal diborides
Authors:
Xiaoming Zhang,
Zhi-Ming Yu,
Xian-Lei Sheng,
Hui Ying Yang,
Shengyuan A. Yang
Abstract:
Topological metals with protected band-crossing points have been attracting great interest. Here we report novel topological band features in a family of metal diboride materials. Using first- principles calculations, we show that these materials are metallic, and close to Fermi level, there appears coexistence of one pair of nodal rings and one pair of triply-degenerate nodal points (TNPs). The n…
▽ More
Topological metals with protected band-crossing points have been attracting great interest. Here we report novel topological band features in a family of metal diboride materials. Using first- principles calculations, we show that these materials are metallic, and close to Fermi level, there appears coexistence of one pair of nodal rings and one pair of triply-degenerate nodal points (TNPs). The nodal ring here is distinct from the previously studied ones in that its formation requires four entangled bands, not just two as in previous cases, hence it is termed as a four-band nodal ring (FNR). Remarkably, we show that FNR features Dirac-cone-like surface states, in contrast to the usual drumhead surface states for two-band nodal rings. Due to the presence of inversion symmetry, the TNP here is also different from those discussed previously in inversion-asymmetric systems. Especially, when spin-orbit coupling is included, the TNP here transforms into a novel Dirac point that is close to the borderline between the type-I and type-II Dirac point categories. We discuss their respective symmetry protections, and construct effective models for their characterization. The large linear energy range (> 2 eV) in these materials should facilitate the experimental detection of the signatures of these nontrivial band crossings.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Theoretical prediction of MoN2 monolayer as a high capacity electrode material for metal ion batteries
Authors:
Xiaoming Zhang,
Zhiming Yu,
Shan-Shan Wang,
Shan Guan,
Hui Ying Yang,
Yugui Yao,
Shengyuan A. Yang
Abstract:
Benefited from the advantages on environmental benign, easy purification, and high thermal stability, the recently synthesized two-dimensional (2D) material MoN2 shows great potential for clean and renewable energy applications. Here, through first-principles calculations, we show that the monolayered MoN2 is promising to be a high capacity electrode material for metal ion batteries. Firstly, iden…
▽ More
Benefited from the advantages on environmental benign, easy purification, and high thermal stability, the recently synthesized two-dimensional (2D) material MoN2 shows great potential for clean and renewable energy applications. Here, through first-principles calculations, we show that the monolayered MoN2 is promising to be a high capacity electrode material for metal ion batteries. Firstly, identified by phonon dispersion and exfoliation energy calculations, MoN2 monolayer is proved to be structurally stable and could be exfoliated from its bulk counterpart in experiments. Secondly, all the studied metal atoms (Li, Na and K) can be adsorbed on MoN2 monolayer, with both pristine and doped MoN2 being metallic. Thirdly, the metal atoms possess moderate/low migration barriers on MoN2, which ensures excellent cycling performance as a battery electrode. In addition, the calculated average voltages suggest that MoN2 monolayer is suitable to be a cathode for Li-ion battery and anodes for Na-ion and K-ion batteries. Most importantly, as a cathode for Li-ion battery, MoN2 possesses a comparable average voltage but a 1-2 times larger capacity (432 mA h g-1) than usual commercial cathode materials; as an anode for Na-ion battery, the theoretical capacity (864 mA h g-1) of MoN2 is 2-5 times larger than typical 2D anode materials such as MoS2 and most MXenes. Finally we also provide an estimation of capacities for other transition-metal dinitrides materials. Our work suggests that the transition-metal dinitrides MoN2 is an appealing 2D electrode materials with high storage capacities.
△ Less
Submitted 20 September, 2016;
originally announced September 2016.
-
Borophene as an extremely high capacity electrode material for Li-ion and Na-ion batteries
Authors:
Xiaoming Zhang,
Jun** Hu,
Yingchun Cheng,
Hui Ying Yang,
Yugui Yao,
Shengyuan A. Yang
Abstract:
Two-dimensional (2D) materials as electrodes is believed to be the trend for future Li-ion and Na-ion batteries technologies. Here, by using first-principles methods, we predict that the recently reported borophene (2D born sheet) can serve as an ideal electrode material with high electrochemical performance for both Li-ion and Na-ion batteries. The calculations are performed on the two experiment…
▽ More
Two-dimensional (2D) materials as electrodes is believed to be the trend for future Li-ion and Na-ion batteries technologies. Here, by using first-principles methods, we predict that the recently reported borophene (2D born sheet) can serve as an ideal electrode material with high electrochemical performance for both Li-ion and Na-ion batteries. The calculations are performed on the two experimentally stable borophene structures, namely \b{eta}12 and \c{hi}3 structures. The optimized Li and Na adsorption sites are identified, and the host materials are found to maintain good electric conductivity before and after adsorption. Besides advantages including small diffusion barriers and low average open-circuit voltages, most remarkably, the storage capacity can be as high as 1984 mA h g-1 in \b{eta}12 borophene and 1240 mA h g-1 in \c{hi}3 borophene for both Li and Na, which is several times higher than the commercial graphite electrode and is the highest among all the 2D materials discovered to date. Our results highly support that borophenes can be appealing anode materials for both Li-ion and Na-ion batteries with extremely high power density.
△ Less
Submitted 5 August, 2016;
originally announced August 2016.
-
Study on a prototype of the large dimensional refractive lens for the future large field-of-view IACT
Authors:
T. L. Chen,
Z. Wang,
Q. Gao,
C. Liu,
Y. Zhang,
H. B. Hu,
H. Cai,
X. Y. Zhang,
H. Y. Yang,
Y. Shi,
Danzengluobu,
M. Y. Liu,
Z. Y. Feng,
Y. L. Feng,
Y. Q. Guo,
Q. B. Gou,
Z. Tian,
Y. X. Xiao
Abstract:
In gamma ray astronomy, the energy range from sub-100GeV to TeV is crucial due to where there is a gap between space experiments and ground-based ones. In addition, observations in this energy range are expected to provide more details about the high energy emission from GRBs,and thus to understand EBL. Based on the observation results and the related knowledge, scientists may be able to unveil th…
▽ More
In gamma ray astronomy, the energy range from sub-100GeV to TeV is crucial due to where there is a gap between space experiments and ground-based ones. In addition, observations in this energy range are expected to provide more details about the high energy emission from GRBs,and thus to understand EBL. Based on the observation results and the related knowledge, scientists may be able to unveil the mysteries of galaxy formation and the evolution of early universe. One of the principal issues for next generation Imaging Atmospheric Cherenkov Telescopes (IACT) is to achieve larger field of view (FoV). In this work, we report a refractive water convex lens as light collector to test the feasibility of a new generation of IACT, and some preliminary test results on the optical properties (the focal length, spot size, transmittance, etc.) of a 0.9 m diameter water lens, the photodetectors and DAQ system of a prototype are presented and discussed.
△ Less
Submitted 6 September, 2015;
originally announced September 2015.
-
Continuum variable entangled state generated by an asymmetric beam splitter
Authors:
H. Y. Fan Y. L. Yang
Abstract:
The generating entangled state by using a 50/50 beamsplitter has been discussed in the literature before . In this paper we explore how to use an asymmetric beam-splitter to produce a new kind of entangled state. We construct such kind of states theoretically and then prove that they make up a complete and orthonormal representation in two-mode Fock space. Its application in finding new squeezin…
▽ More
The generating entangled state by using a 50/50 beamsplitter has been discussed in the literature before . In this paper we explore how to use an asymmetric beam-splitter to produce a new kind of entangled state. We construct such kind of states theoretically and then prove that they make up a complete and orthonormal representation in two-mode Fock space. Its application in finding new squeezing operator and new squeezed state is introduced.
△ Less
Submitted 13 November, 2005;
originally announced November 2005.
-
First limit on WIMP cross section with low background CsI(Tl) crystal detector
Authors:
Kims Collaboration,
H. S. Lee,
H. Bhang,
S. Y. Kim,
J. Lee,
J. H. Lee,
J. W. Kwak,
S. S. Myung,
M. J. Lee,
S. C. Kim,
J. H. Choi,
S. K. Kim,
T. Y. Kim,
H. Park,
H. Y. Yang,
J. I. Lee,
Y. D. Kim,
M. J. Hwang,
Y. J. Kwon,
I. S. Hahn,
H. J. Kim,
D. He,
J. J. Zhu,
J. Li
Abstract:
The Korea Invisible Mass Search (KIMS) collaboration has been carrying out WIMP search experiment with CsI(T$\ell$)crystal detectors at the YanYang Underground Laboratory. A successful reduction of the internal background of the crystal is done and a good pulse shape discrimination is achieved. We report the first result on WIMP search obtained with 237 kg$\cdot$days data using one full-size CsI…
▽ More
The Korea Invisible Mass Search (KIMS) collaboration has been carrying out WIMP search experiment with CsI(T$\ell$)crystal detectors at the YanYang Underground Laboratory. A successful reduction of the internal background of the crystal is done and a good pulse shape discrimination is achieved. We report the first result on WIMP search obtained with 237 kg$\cdot$days data using one full-size CsI(T$\ell$)crystal of 6.6 kg mass.
△ Less
Submitted 5 December, 2005; v1 submitted 5 September, 2005;
originally announced September 2005.
-
Neutron beam test of CsI crystal for dark matter search
Authors:
H. Park,
D. H. Choi,
I. S. Hahn,
M. J. Hwang,
W. G. Kang,
H. J. Kim,
J. H. Kim,
S. C. Kim,
S. K. Kim,
T. Y. Kim,
Y. D. Kim,
Y. J. Kwon,
H. S. Lee,
J. H. Lee,
M. H. Lee,
S. E. Lee,
S. H. Noh,
I. H. Park,
E. S. Seo,
E. Won,
H. Y. Yang,
M. S. Yang,
I. Yu
Abstract:
We have studied the response of Tl-doped and Na-doped CsI crystals to nuclear recoils and $γ$'s below 10 keV. The response of CsI crystals to nuclear recoil was studied with mono-energetic neutrons produced by the $^3$H(p,n)$^3$He reaction. This was compared to the response to Compton electrons scattered by 662 keV $γ$-ray. Pulse shape discrimination between the response to these $γ$'s and nucle…
▽ More
We have studied the response of Tl-doped and Na-doped CsI crystals to nuclear recoils and $γ$'s below 10 keV. The response of CsI crystals to nuclear recoil was studied with mono-energetic neutrons produced by the $^3$H(p,n)$^3$He reaction. This was compared to the response to Compton electrons scattered by 662 keV $γ$-ray. Pulse shape discrimination between the response to these $γ$'s and nuclear recoils was studied, and quality factors were estimated. The quenching factors for nuclear recoils were derived for both CsI(Na) and CsI(Tl) crystals.
△ Less
Submitted 13 February, 2002;
originally announced February 2002.