Showing 151–200 of 394 results for author: Yamamoto, S

Physical and chemical fingerprint of protostellar disc formation

Authors: E. Artur de la Villarmois, J. K. Jørgensen, L. E. Kristensen, E. A. Bergin, D. Harsono, N. Sakai, E. F. van Dishoeck, S. Yamamoto

Abstract: (Abridged) The purpose of this paper is to explore and compare the physical and chemical structure of Class I low-mass protostellar sources on protoplanetary disc scales. We present a study of the dust and gas emission towards a representative sample of 12 Class I protostars from the Ophiuchus molecular cloud with the Atacama Large Millimeter/submillimeter Array (ALMA). The continuum at 0.87 mm an… ▽ More (Abridged) The purpose of this paper is to explore and compare the physical and chemical structure of Class I low-mass protostellar sources on protoplanetary disc scales. We present a study of the dust and gas emission towards a representative sample of 12 Class I protostars from the Ophiuchus molecular cloud with the Atacama Large Millimeter/submillimeter Array (ALMA). The continuum at 0.87 mm and molecular transitions from C17O, C34S, H13CO+, CH3OH, SO2 , and C2H were observed at high angular resolution (0.4", ~60 au diameter) towards each source. Disc and stellar masses are estimated from the continuum flux and position-velocity diagrams, and six of the sources show disc-like structures. Towards the more luminous sources, compact emission and large line widths are seen for transitions of SO2 that probe warm gas (Eu ~200 K). In contrast, C17O emission is detected towards the least evolved and less luminous systems. No emission of CH3OH is detected towards any of the continuum peaks, indicating an absence of warm CH3OH gas towards these sources. A power-law relation is seen between the stellar mass and the bolometric luminosity, corresponding to a mass accretion rate of (2.4 +/- 0.6) x 10^-7 Msun/year for the Class I sources. This mass accretion rate is lower than the expected value if the accretion is constant in time and rather points to a scenario of accretion occurring in bursts. The differentiation between C17O and SO2 suggests that they trace different physical components: C17O traces the densest and colder regions of the disc-envelope system, while SO2 may be associated with regions of higher temperature, such as accretion shocks. The lack of warm CH3OH emission suggests that there is no hot-core-like region around any of the sources and that the CH3OH column density averaged over the disc is low. △ Less

Submitted 30 April, 2019; originally announced April 2019.

Comments: 20 pages, 16 figures, 8 tables

Journal ref: A&A 626, A71 (2019)

A 3 mm Spectral Line Survey toward the Barred Spiral Galaxy NGC 3627

Authors: Yoshimasa Watanabe, Yuri Nishimura, Kazuo Sorai, Nami~Sakai, Nario Kuno, Satoshi Yamamoto

Abstract: We conduct spectral line survey observations in the 3 mm band toward a spiral arm, a bar-end, and a nuclear region of the nearby barred spiral galaxy NGC 3627 with the IRAM 30 m telescope and the Nobeyama 45 m telescope. Additional observations are performed toward the spiral arm and the bar-end in the 2 mm band. We detect 8, 11, and 9 molecular species in the spiral arm, the bar-end, and the nucl… ▽ More We conduct spectral line survey observations in the 3 mm band toward a spiral arm, a bar-end, and a nuclear region of the nearby barred spiral galaxy NGC 3627 with the IRAM 30 m telescope and the Nobeyama 45 m telescope. Additional observations are performed toward the spiral arm and the bar-end in the 2 mm band. We detect 8, 11, and 9 molecular species in the spiral arm, the bar-end, and the nuclear region, respectively. Star-formation activities are different among the three regions, and in particular, the nucleus of NGC 3627 is known as a LINER/Seyfert 2 type nucleus. In spite of these physical differences, the chemical composition shows impressive similarities among the three regions. This result means that the characteristic chemical composition associated with these regions is insensitive to the local physical conditions such as star formation rate, because such local effects are smeared out by extended quiescent molecular gas on scales of 1 kpc. Moreover, the observed chemical compositions are also found to be similar to those of molecular clouds in our Galaxy and the spiral arm of M51, whose elemental abundances are close to those in NGC 3627. Therefore, this study provides us with a standard template of the chemical composition of extended molecular clouds with the solar metalicity in nearby galaxies. △ Less

Submitted 28 April, 2019; originally announced April 2019.

Comments: Accepted for publication in The Astrophysical Journal Supplement Series, 10 figures, 10 tables

Pressure-induced superconductivity in layered pnictogen diselenide NdO$_{0.8}$F$_{0.2}$Sb$_{1-x}$Bi$_x$Se$_2$ (x = 0.3 and 0.7)

Authors: Ryo Matsumoto, Yosuke Goto, Sayaka Yamamoto, Kenta Sudo, Hidetomo Usui, Akira Miura, Chikako Moriyoshi, Yoshihiro Kuroiwa, Shintaro Adachi, Tetsuo Irifune, Hiroyuki Takeya, Hiromi Tanaka, Kazuhiko Kuroki, Yoshikazu Mizuguchi, Yoshihiko Takano

Abstract: Polycrystalline samples of layered pnictogen diselenide NdO0.8F0.2Sb1-xBixSe2 (x = 0 to 0.8) were successfully synthesized by solid-state reactions. Electrical resistivity in the synthesized samples was systematically decreased with an increase in Bi content x. Crystal structure analysis using synchrotron X-ray diffraction suggests that insulator to metal transition upon Bi do** correlates with… ▽ More Polycrystalline samples of layered pnictogen diselenide NdO0.8F0.2Sb1-xBixSe2 (x = 0 to 0.8) were successfully synthesized by solid-state reactions. Electrical resistivity in the synthesized samples was systematically decreased with an increase in Bi content x. Crystal structure analysis using synchrotron X-ray diffraction suggests that insulator to metal transition upon Bi do** correlates with anomalous change in c-axis length and/or corrugation in conducting layer. The emergence of superconductivity under high pressure is demonstrated using diamond anvil cell (DAC) with boron-doped diamond electrodes, for x = 0.3 and 0.7 as the representative samples. For Sb-rich one (x = 0.3), we observed a superconducting transition with Tconset = 5.3 K at 50 GPa, which is the first-ever report of the superconductivity in layered SbCh2-based (Ch: chalcogen) compounds. The Tconset of x = 0.3 increased with increasing pressure and reached 7.9 K at 70.8 GPa, followed by the gradual decrease in Tc up to 90 GPa. For Bi-rich one (x = 0.7), a superconducting transition with Tconset = 5.9 K was observed at 43.5 GPa, which is the almost comparable to that of x = 0.3; besides, upper critical field (Hc2) is evaluated to be ~10 T for x = 0.7, which is higher than that of x = 0.3 (Hc2 = 6.7 T at 50 GPa). △ Less

Submitted 1 October, 2019; v1 submitted 18 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. B 100, 094528 (2019)

Spin-wave thermodynamics of square-lattice antiferromagnets revisited

Authors: Shoji Yamamoto, Yusaku Noriki

Abstract: Modifying the conventional spin-wave theory in a novel manner based on the Wick decomposition, we present an elaborate thermodynamics of square-lattice quantum antiferromagnets. Our scheme is no longer accompanied by the notorious problem of an artificial transition to the paramagnetic state inherent in modified spin waves in the Hartree-Fock approximation. In the cases of spin $\frac{1}{2}$ and s… ▽ More Modifying the conventional spin-wave theory in a novel manner based on the Wick decomposition, we present an elaborate thermodynamics of square-lattice quantum antiferromagnets. Our scheme is no longer accompanied by the notorious problem of an artificial transition to the paramagnetic state inherent in modified spin waves in the Hartree-Fock approximation. In the cases of spin $\frac{1}{2}$ and spin $1$, various modified-spin-wave findings for the internal energy, specific heat, static uniform susceptibility, and dynamic structure factor are not only numerically compared with quantum Monte Carlo calculations and Lanczos exact diagonalizations but also analytically expanded into low-temperature series. Modified spin waves interacting via the Wick decomposition provide reliable thermodynamics over the whole temperature range of absolute zero to infinity. Adding higher-order spin couplings such as ring exchange interaction to the naivest Heisenberg Hamiltonian, we precisely reproduce inelastic-neutron-scattering measurements of the high-temperature-superconductor-parent antiferromagnet $\mathrm{La}_2\mathrm{CuO}_4$. Modifying Dyson-Maleev bosons combined with auxiliary pseudofermions also yields thermodynamics of square-lattice antiferromagnets free from thermal breakdown, but it is less precise unless temperature is sufficiently low. Applying all the schemes to layered antiferromagnets as well, we discuss the advantages and disadvantages of modified spin-wave and combined boson-pseudofermion representations. △ Less

Submitted 9 March, 2019; originally announced March 2019.

Comments: Phys. Rev. B, in press

Journal ref: Phys. Rev. B 99, 094412 (2019)

Data-driven Exploration of Pressure-Induced Superconductivity in AgIn$_{5}$Se$_{8}$

Authors: Ryo Matsumoto, Hiroshi Hara, Zhufeng Hou, Shintaro Adachi, Hiromi Tanaka, Sayaka Yamamoto, Yoshito Saito, Hiroyuki Takeya, Tetsuo Irifune, Kiyoyuki Terakura, Yoshihiko Takano

Abstract: Candidates compounds for new thermoelectric and superconducting materials, which have narrow band gap and flat bands near band edges, were exhaustively searched by a high-throughput first-principles calculation from an inorganic materials database named AtomWork. We focused on AgIn$_{5}$Se$_{8}$ which has high density of state near the Fermi level. AgIn$_{5}$Se$_{8}$ was successfully synthesized a… ▽ More Candidates compounds for new thermoelectric and superconducting materials, which have narrow band gap and flat bands near band edges, were exhaustively searched by a high-throughput first-principles calculation from an inorganic materials database named AtomWork. We focused on AgIn$_{5}$Se$_{8}$ which has high density of state near the Fermi level. AgIn$_{5}$Se$_{8}$ was successfully synthesized as single crystals using a melt and slow cooling method. The single-crystal X-ray diffraction analysis revealed the obtained crystal is high quality without deficiencies. The valence states in AgIn$_{5}$Se$_{8}$ were determined to be Ag1+, In3+ and Se2- in accordance with a formal charge by the core level X-ray photoelectron spectroscopy analysis. The electrical resistance was evaluated under high pressure using a diamond anvil cell with boron-doped diamond electrodes. Although the sample was insulator with a resistance of above 40 MΩ at ambient pressure, the resistance markedly decreased with increase of the pressure, and a pressure-induced superconducting transition was discovered at 3.4 K under 52.5 GPa. The transition temperature increased up to 3.7 K under further pressure of 74.0 GPa. △ Less

Submitted 26 February, 2019; originally announced February 2019.

Absorption cross-section spectroscopy of single strong coupling system between plasmon and molecular exciton resonance using single silver nanoparticle dimer generating surface enhanced resonant Raman scattering

Authors: Tamitake Itoh, Yuko S. Yamamoto, Takayuki Okamoto

Abstract: This study investigated spectral changes in the absorption cross-sections of single strong coupling systems composed of single silver nanoparticle dimers and a few dye molecules during the quenching of surface-enhanced resonant Raman scattering (SERRS). The absorption cross-section was obtained by subtracting the scattering cross-section from an extinction cross-section. The spectral changes in th… ▽ More This study investigated spectral changes in the absorption cross-sections of single strong coupling systems composed of single silver nanoparticle dimers and a few dye molecules during the quenching of surface-enhanced resonant Raman scattering (SERRS). The absorption cross-section was obtained by subtracting the scattering cross-section from an extinction cross-section. The spectral changes in these cross-sections were evaluated using a classical hybridization model composed of a plasmon and a molecular exciton including a molecular multi-level property. The changes in the scattering and extinction cross-sections exhibit blue-shifts in their peak energy and increased peak intensities, respectively, during SERRS quenching. These properties are effectively reproduced in the model by decreasing the coupling energy. In particular, the peaks in the scattering and extinction cross-sections appear as peaks or dips in the absorption cross-sections depending on the degree of scattering loss, which reflects the dimer sizes. These results are useful for optimizing photophysical and photochemical effects mediated by the electronic excited states of strong coupling systems. △ Less

Submitted 22 February, 2019; originally announced February 2019.

Comments: 30 pages, 6 figures

Journal ref: Phys. Rev. B 99, 235409 (2019)

The Effect of Far-infrared Radiation on the Hyperfine Anomaly of the OH 18 cm Transition

Authors: Yuji Ebisawa, Nami Sakai, Karl M. Menten, Satoshi Yamamoto

Abstract: We present observations of the four hyperfine structure components of the OH 18 cm transition (1612, 1665, 1667 and 1720 MHz) toward Heiles Cloud 2 (HCL2) in Taurus and the dense cores L183 and L169. Toward the peculiar straight structure in the northern part of HCL2, the 1720 MHz line shows absorption against the cosmic microwave background at a velocity of $\sim$ 5.5 km s$^{-1}$, whereas the 161… ▽ More We present observations of the four hyperfine structure components of the OH 18 cm transition (1612, 1665, 1667 and 1720 MHz) toward Heiles Cloud 2 (HCL2) in Taurus and the dense cores L183 and L169. Toward the peculiar straight structure in the northern part of HCL2, the 1720 MHz line shows absorption against the cosmic microwave background at a velocity of $\sim$ 5.5 km s$^{-1}$, whereas the 1612 MHz line shows brighter emission than expected in local thermodynamic equilibrium (LTE). Such an intensity anomaly is also observed toward TMC-1 (CP), L183, and L169, where the 1612 MHz line is stronger and the 1720 MHz line is weaker than those expected under LTE. We conduct statistical equilibrium calculations considering the effect of far-infrared (FIR) radiation from surrounding clouds and find that the absorption feature of the 1720 MHz line can be reproduced by the following conditions: gas kinetic temperature lower than about 30 K, OH column density higher than 10$^{15}$ cm$^{-2}$, H$_2$ density lower than 10$^3$ cm$^{-3}$, and an ortho-to-para ratio of H$_2$ lower than 1. Therefore, the absorption feature of the 1720 MHz line is considered to trace relatively cold and dense gas that is surrounded by a warm envelope consisting of CO-dark molecular gas. △ Less

Submitted 29 January, 2019; originally announced January 2019.

Comments: 61 pages, 30 figures

Journal ref: ApJ 871 89 (2019)

Pressure-induced Superconductivity in Tin Sulfide

Authors: Ryo Matsumoto, Peng Song, Shintaro Adachi, Yoshito Saito, Hiroshi Hara, Kazuki Nakamura, Sayaka Yamamoto, Hiromi Tanaka, Tetsuo Irifune, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Tin sulfide (SnS) was successfully synthesized in single crystals by a melt and slow-cooling method. The obtained sample was characterized by an X-ray diffraction, an energy dispersive spectrometry, and an X-ray photoelectron spectroscopy. Electrical transport properties in SnS were investigated under high pressure using a diamond anvil cell with boron-doped metallic diamond electrodes and undoped… ▽ More Tin sulfide (SnS) was successfully synthesized in single crystals by a melt and slow-cooling method. The obtained sample was characterized by an X-ray diffraction, an energy dispersive spectrometry, and an X-ray photoelectron spectroscopy. Electrical transport properties in SnS were investigated under high pressure using a diamond anvil cell with boron-doped metallic diamond electrodes and undoped diamond insulating layer. We successfully observed an insulator to metal transition from 12.5 GPa and pressure-induced superconductivity at 5.8 K under 47.8 GPa as predicted by a theoretical calculation. △ Less

Submitted 21 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. B 99, 184502 (2019)

An unbiased spectral line survey observation toward the low-mass star-forming region L1527

Authors: Kento Yoshida, Nami Sakai, Yuri Nishimura, Tomoya Tokudome, Yoshimasa Watanabe, Takeshi Sakai, Shuro Takano, Satoshi Yamamoto

Abstract: An unbiased spectral line survey toward a solar-type Class 0/I protostar, IRAS04368+2557, in L1527 has been carried out in the 3 mm band with the Nobeyama 45 m telescope. L1527 is known as a warm carbon-chain chemistry (WCCC) source, which harbors abundant unsaturated organic species such as C$_n$H ($n = 3,\ 4,\ 5,\ldots$) in a warm and dense region near the protostar. The observation covers the f… ▽ More An unbiased spectral line survey toward a solar-type Class 0/I protostar, IRAS04368+2557, in L1527 has been carried out in the 3 mm band with the Nobeyama 45 m telescope. L1527 is known as a warm carbon-chain chemistry (WCCC) source, which harbors abundant unsaturated organic species such as C$_n$H ($n = 3,\ 4,\ 5,\ldots$) in a warm and dense region near the protostar. The observation covers the frequency range from 80 to 116 GHz. A supplementary observation has also been conducted in the 70 GHz band to observe fundamental transitions of deuterated species. In total, 69 molecular species are identified, among which 27 species are carbon-chain species and their isomers, including their minor isotopologues. This spectral line survey provides us with a good template of the chemical composition of the WCCC source. △ Less

Submitted 19 January, 2019; originally announced January 2019.

Comments: published online in PASJ

First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA

Authors: KAGRA Collaboration, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda , et al. (179 additional authors not shown)

Abstract: KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic… ▽ More KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors. △ Less

Submitted 11 January, 2019; originally announced January 2019.

Comments: 23 pages, 11 figures

Report number: JGW-P1809289

Journal ref: Classical and Quantum Gravity 36, 165008 (2019)

Vibration isolation system with a compact dam** system for power recycling mirrors of KAGRA

Authors: Y. Akiyama, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, V. Dattilo, K. Doi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (149 additional authors not shown)

Abstract: A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main st… ▽ More A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main stages allows for achieving sufficient dam** performance with a simple feedback as well as vibration isolation ratio. Three Type-Bp systems were installed in KAGRA, and were proved to satisfy the requirements on the dam** performance, and also on estimated residual displacement of the optics. △ Less

Submitted 10 January, 2019; originally announced January 2019.

Molecular-Cloud-Scale Chemical Composition III: Constraints of Average Physical Properties through Chemical Models

Authors: Nanase Harada, Yuri Nishimura, Yoshimasa Watanabe, Satoshi Yamamoto, Yuri Aikawa, Nami Sakai, Takashi Shimonishi

Abstract: It is important to understand the origin of molecular line intensities and chemical composition in the molecular-cloud scale in the Galactic sources because it serves as a benchmark to compare with the chemical compositions of extragalactic sources. Recent observations of the 3-mm spectra averaged over the 10-pc scale show similar spectral pattern among sources for molecular lines HCN, HCO$^+$, CC… ▽ More It is important to understand the origin of molecular line intensities and chemical composition in the molecular-cloud scale in the Galactic sources because it serves as a benchmark to compare with the chemical compositions of extragalactic sources. Recent observations of the 3-mm spectra averaged over the 10-pc scale show similar spectral pattern among sources for molecular lines HCN, HCO$^+$, CCH, HNC, HNCO, c-C$_3$H$_2$, CS, SO, N$_2$H$^+$, and CN. To constrain the average physical property emitting such spectral pattern, we model molecular spectra using a time-dependent gas-grain chemical model followed by a radiative transfer calculation. We use a grid of physical parameters such as the density $n=3 \times 10^2 - 3\times 10^4$ cm$^{-3}$, the temperature, $T=10-30$ K, the visual extinction $A_{\rm V} = 2,4,10$ mag, the cosmic-ray ionization rate $ζ= 10^{-17} - 10^{-16}$ s$^{-1}$, and the sulfur elemental abundance $S/H = 8\times 10^{-8} - 8\times 10^{-7}$. Comparison with the observed spectra indicates that spectra are well reproduced with the relatively low density of $n=(1-3) \times 10^3\,$cm$^{-3}$, $T=10\,$K, $ζ= 10^{-17}$ s$^{-1}$, and the short chemistry timescale of $10^5$ yrs. This short chemistry timescale may indicate that molecular clouds are constantly affected by the turbulence, and exposed to low-density, low $A_{\rm V}$ regions that "refreshes" the chemical clock by UV radiation. The relatively low density obtained is orders of magnitude lower than the commonly-quoted critical density in the optically thin case. Meanwhile, this range of density is consistent with results from recent observational analysis of molecular-cloud-scale map**. △ Less

Submitted 8 December, 2018; originally announced December 2018.

Comments: 30 pages, 21 figures, accepted for publication in The Astrophysical Journal

Conditional Video Generation Using Action-Appearance Captions

Authors: Shohei Yamamoto, Antonio Tejero-de-Pablos, Yoshitaka Ushiku, Tatsuya Harada

Abstract: The field of automatic video generation has received a boost thanks to the recent Generative Adversarial Networks (GANs). However, most existing methods cannot control the contents of the generated video using a text caption, losing their usefulness to a large extent. This particularly affects human videos due to their great variety of actions and appearances. This paper presents Conditional Flow… ▽ More The field of automatic video generation has received a boost thanks to the recent Generative Adversarial Networks (GANs). However, most existing methods cannot control the contents of the generated video using a text caption, losing their usefulness to a large extent. This particularly affects human videos due to their great variety of actions and appearances. This paper presents Conditional Flow and Texture GAN (CFT-GAN), a GAN-based video generation method from action-appearance captions. We propose a novel way of generating video by encoding a caption (e.g., "a man in blue jeans is playing golf") in a two-stage generation pipeline. Our CFT-GAN uses such caption to generate an optical flow (action) and a texture (appearance) for each frame. As a result, the output video reflects the content specified in the caption in a plausible way. Moreover, to train our method, we constructed a new dataset for human video generation with captions. We evaluated the proposed method qualitatively and quantitatively via an ablation study and a user study. The results demonstrate that CFT-GAN is able to successfully generate videos containing the action and appearances indicated in the captions. △ Less

Submitted 4 December, 2018; v1 submitted 4 December, 2018; originally announced December 2018.

Multiple-Instance Learning by Boosting Infinitely Many Shapelet-based Classifiers

Authors: Daiki Suehiro, Kohei Hatano, Eiji Takimoto, Shuji Yamamoto, Kenichi Bannai, Akiko Takeda

Abstract: We propose a new formulation of Multiple-Instance Learning (MIL). In typical MIL settings, a unit of data is given as a set of instances called a bag and the goal is to find a good classifier of bags based on similarity from a single or finitely many "shapelets" (or patterns), where the similarity of the bag from a shapelet is the maximum similarity of instances in the bag. Classifiers based on a… ▽ More We propose a new formulation of Multiple-Instance Learning (MIL). In typical MIL settings, a unit of data is given as a set of instances called a bag and the goal is to find a good classifier of bags based on similarity from a single or finitely many "shapelets" (or patterns), where the similarity of the bag from a shapelet is the maximum similarity of instances in the bag. Classifiers based on a single shapelet are not sufficiently strong for certain applications. Additionally, previous work with multiple shapelets has heuristically chosen some of the instances as shapelets with no theoretical guarantee of its generalization ability. Our formulation provides a richer class of the final classifiers based on infinitely many shapelets. We provide an efficient algorithm for the new formulation, in addition to generalization bound. Our empirical study demonstrates that our approach is effective not only for MIL tasks but also for Shapelet Learning for time-series classification. △ Less

Submitted 9 December, 2018; v1 submitted 20 November, 2018; originally announced November 2018.

Comments: The preliminary version of this paper is arXiv:1709.01300. which only focuses on shapelet-based time-series classification but not Muptiple-Instance Learning. Note that the preliminary version has not been published

KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda, Y. Enomoto , et al. (169 additional authors not shown)

Abstract: The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Tel… ▽ More The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: 6 pages, 3 figures (quality of some figures has been reduced)

Report number: JGW-P1809243

Journal ref: Nature Astronomy 3, 35 (2019)

Automatic Paper Summary Generation from Visual and Textual Information

Authors: Shintaro Yamamoto, Yoshihiro Fukuhara, Ryota Suzuki, Shigeo Morishima, Hirokatsu Kataoka

Abstract: Due to the recent boom in artificial intelligence (AI) research, including computer vision (CV), it has become impossible for researchers in these fields to keep up with the exponentially increasing number of manuscripts. In response to this situation, this paper proposes the paper summary generation (PSG) task using a simple but effective method to automatically generate an academic paper summary… ▽ More Due to the recent boom in artificial intelligence (AI) research, including computer vision (CV), it has become impossible for researchers in these fields to keep up with the exponentially increasing number of manuscripts. In response to this situation, this paper proposes the paper summary generation (PSG) task using a simple but effective method to automatically generate an academic paper summary from raw PDF data. We realized PSG by combination of vision-based supervised components detector and language-based unsupervised important sentence extractor, which is applicable for a trained format of manuscripts. We show the quantitative evaluation of ability of simple vision-based components extraction, and the qualitative evaluation that our system can extract both visual item and sentence that are helpful for understanding. After processing via our PSG, the 979 manuscripts accepted by the Conference on Computer Vision and Pattern Recognition (CVPR) 2018 are available. It is believed that the proposed method will provide a better way for researchers to stay caught with important academic papers. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Comments: International Conference on Machine Vision 2018, Munich, Germany

Comparison of various methods to extract ringdown frequency from gravitational wave data

Authors: Hiroyuki Nakano, Tatsuya Narikawa, Ken-ichi Oohara, Kazuki Sakai, Hisa-aki Shinkai, Hirotaka Takahashi, Takahiro Tanaka, Nami Uchikata, Shun Yamamoto, Takahiro S. Yamamoto

Abstract: The ringdown part of gravitational waves in the final stage of merger of compact objects tells us the nature of strong gravity which can be used for testing the theories of gravity. The ringdown waveform, however, fades out in a very short time with a few cycles, and hence it is challenging for gravitational wave data analysis to extract the ringdown frequency and its dam** time scale. We here p… ▽ More The ringdown part of gravitational waves in the final stage of merger of compact objects tells us the nature of strong gravity which can be used for testing the theories of gravity. The ringdown waveform, however, fades out in a very short time with a few cycles, and hence it is challenging for gravitational wave data analysis to extract the ringdown frequency and its dam** time scale. We here propose to build up a suite of mock data of gravitational waves to compare the performance of various approaches developed to detect quasi-normal modes from a black hole. In this paper we present our initial results of comparisons of the following five methods; (1) plain matched filtering with ringdown part (MF-R) method, (2) matched filtering with both merger and ringdown parts (MF-MR) method, (3) Hilbert-Huang transformation (HHT) method, (4) autoregressive modeling (AR) method, and (5) neural network (NN) method. After comparing their performance, we discuss our future projects. △ Less

Submitted 6 June, 2019; v1 submitted 15 November, 2018; originally announced November 2018.

Comments: 15 pages, 4 figures

Journal ref: Phys. Rev. D 99, 124032 (2019)

Disconnected hadronic vacuum polarization contribution to the muon g-2 with HISQ

Authors: Shuhei Yamamoto, Carleton DeTar, Aida X. El-Khadra, Craig McNeile, Ruth S. Van de Water, Alejandro Vaquero

Abstract: We describe a computation of the contribution to the anomalous magnetic moment of the muon from the disconnected part of the hadronic vacuum polarization. We use the highly-improved staggered quark (HISQ) formulation for the current density with gauge configurations generated with four flavors of HISQ sea quarks. The computation is performed by stochastic estimation of the current density using th… ▽ More We describe a computation of the contribution to the anomalous magnetic moment of the muon from the disconnected part of the hadronic vacuum polarization. We use the highly-improved staggered quark (HISQ) formulation for the current density with gauge configurations generated with four flavors of HISQ sea quarks. The computation is performed by stochastic estimation of the current density using the truncated solver method combined with deflation of low-modes. The parameters are tuned to minimize the computational cost for a given target uncertainty in the current-current correlation function. The calculation presented here is carried out on a single gauge-field ensemble of size $32^3\times48$ with an approximate lattice spacing of $\sim0.15$ fm and with physical sea-quark masses. We describe the methodology and the analysis procedure △ Less

Submitted 2 November, 2019; v1 submitted 14 November, 2018; originally announced November 2018.

Comments: 7 pages, 4 figures, The 36th Annual International Symposium on Lattice Field Theory - LATTICE2018

Hermite integrator for high-order mesh-free schemes

Authors: Satoko Yamamoto, Junichiro Makino

Abstract: In most of mesh-free methods, the calculation of interactions between sample points or particles is the most time consuming. When we use mesh-free methods with high spatial orders, the order of the time integration should also be high. If we use usual Runge-Kutta schemes, we need to perform the interaction calculation multiple times per one time step. One way to reduce the number of interaction ca… ▽ More In most of mesh-free methods, the calculation of interactions between sample points or particles is the most time consuming. When we use mesh-free methods with high spatial orders, the order of the time integration should also be high. If we use usual Runge-Kutta schemes, we need to perform the interaction calculation multiple times per one time step. One way to reduce the number of interaction calculations is to use Hermite schemes, which use the time derivatives of the right hand side of differential equations, since Hermite schemes require smaller number of interaction calculations than RK schemes do to achieve the same order. In this paper, we construct a Hermite scheme for a mesh-free method with high spatial orders. We performed several numerical tests with fourth-order Hermite schemes and Runge-Kutta schemes. We found that, for both of Hermite and Runge-Kutta schemes, the overall error is determined by the error of spatial derivatives, for timesteps smaller than the stability limit. The calculation cost at the timestep size of the stability limit is smaller for Hermite schemes. Therefore, we conclude that Hermite schemes are more efficient than Runge-Kutta schemes and thus useful for high-order mesh-free methods for Lagrangian Hydrodynamics. △ Less

Submitted 20 November, 2018; v1 submitted 13 November, 2018; originally announced November 2018.

Comments: 22 pages, 16 figures, Accepted for publication in Pub. Astron. Soc. J

Investigating context features hidden in End-to-End TTS

Authors: Kohki Mametani, Tsuneo Kato, Seiichi Yamamoto

Abstract: Recent studies have introduced end-to-end TTS, which integrates the production of context and acoustic features in statistical parametric speech synthesis. As a result, a single neural network replaced laborious feature engineering with automated feature learning. However, little is known about what types of context information end-to-end TTS extracts from text input before synthesizing speech, an… ▽ More Recent studies have introduced end-to-end TTS, which integrates the production of context and acoustic features in statistical parametric speech synthesis. As a result, a single neural network replaced laborious feature engineering with automated feature learning. However, little is known about what types of context information end-to-end TTS extracts from text input before synthesizing speech, and the previous knowledge about context features is barely utilized. In this work, we first point out the model similarity between end-to-end TTS and parametric TTS. Based on the similarity, we evaluate the quality of encoder outputs from an end-to-end TTS system against eight criteria that are derived from a standard set of context information used in parametric TTS. We conduct experiments using an evaluation procedure that has been newly developed in the machine learning literature for quantitative analysis of neural representations, while adapting it to the TTS domain. Experimental results show that the encoder outputs reflect both linguistic and phonetic contexts, such as vowel reduction at phoneme level, lexical stress at syllable level, and part-of-speech at word level, possibly due to the joint optimization of context and acoustic features. △ Less

Submitted 25 February, 2019; v1 submitted 4 November, 2018; originally announced November 2018.

Comments: Accepted to ICASSP 2019

Pressure-induced Insulator to Metal Transition of Mixed Valence Compound Ce(O,F)SbS$_{2}$

Authors: Ryo Matsumoto, Masanori Nagao, Masayuki Ochi, Hiromi Tanaka, Hiroshi Hara, Shintaro Adachi, Kazuki Nakamura, Ryo Murakami, Sayaka Yamamoto, Tetsuo Irifune, Hiroyuki Takeya, Isao Tanaka, Kazuhiko Kuroki, Yoshihiko Takano

Abstract: Transport properties of Ce$_{0.85}$F0.15SbS$_{2}$ and undoped CeOSbS$_{2}$ under high pressure were investigated experimentally and theoretically. Electrical resistivity measurements of the Ce$_{0.85}$F0.15SbS$_{2}$ single crystals were performed under various high pressures using a diamond anvil cell with boron-doped diamond electrodes. The samples showed the insulator to metal transition by appl… ▽ More Transport properties of Ce$_{0.85}$F0.15SbS$_{2}$ and undoped CeOSbS$_{2}$ under high pressure were investigated experimentally and theoretically. Electrical resistivity measurements of the Ce$_{0.85}$F0.15SbS$_{2}$ single crystals were performed under various high pressures using a diamond anvil cell with boron-doped diamond electrodes. The samples showed the insulator to metal transition by applying high pressure up to 30-40 GPa. On the other hand, the undoped CeOSbS$_{2}$ showed almost same transport property with the F-doped sample under high pressure. The valence state analysis using X-ray photoelectron spectroscopy revealed a simple valence state of Ce3+ in Ce$_{0.85}$F0.15SbS$_{2}$ and mixed valence state between Ce3+ and Ce4+ in undoped CeOSbS$_{2}$. The valence fluctuation in Ce carried out the comparable transport nature in the both samples. A band calculation suggests that the undoped CeOSbS$_{2}$ could be metallic under high pressure of 30 GPa in accordance with the experimental results. A superior thermoelectric property of power factor in CeOSbS$_{2}$ was estimated under high pressure around 20 GPa in comparison with that of ambient pressure. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Journal ref: J.Appl. Phys.125,075102, (2019)

Understanding Fake Faces

Authors: Ryota Natsume, Kazuki Inoue, Yoshihiro Fukuhara, Shintaro Yamamoto, Shigeo Morishima, Hirokatsu Kataoka

Abstract: Face recognition research is one of the most active topics in computer vision (CV), and deep neural networks (DNN) are now filling the gap between human-level and computer-driven performance levels in face verification algorithms. However, although the performance gap appears to be narrowing in terms of accuracy-based expectations, a curious question has arisen; specifically, "Face understanding o… ▽ More Face recognition research is one of the most active topics in computer vision (CV), and deep neural networks (DNN) are now filling the gap between human-level and computer-driven performance levels in face verification algorithms. However, although the performance gap appears to be narrowing in terms of accuracy-based expectations, a curious question has arisen; specifically, "Face understanding of AI is really close to that of human?" In the present study, in an effort to confirm the brain-driven concept, we conduct image-based detection, classification, and generation using an in-house created fake face database. This database has two configurations: (i) false positive face detections produced using both the Viola Jones (VJ) method and convolutional neural networks (CNN), and (ii) simulacra that have fundamental characteristics that resemble faces but are completely artificial. The results show a level of suggestive knowledge that indicates the continuing existence of a gap between the capabilities of recent vision-based face recognition algorithms and human-level performance. On a positive note, however, we have obtained knowledge that will advance the progress of face-understanding models. △ Less

Submitted 22 September, 2018; originally announced September 2018.

Comments: 11 pages, 3 figures, ECCV 2018 Workshop on Brain-Driven Computer Vision (BDCV)

The Co-evolution of Disk and Star in Embedded Stages: The Case of the Very Low-mass Protostar

Authors: Yuki Okoda, Yoko Oya, Nami Sakai, Yoshimasa Watanabe, Jes K. Jørgensen, Ewine F. van Dishoeck, Satoshi Yamamoto

Abstract: We have observed the CCH (N=3-2, J=7/2-5/2, F=4-3 and 3-2) and SO (6_7-5_6) emission at a 0"2 angular resolution toward the low-mass Class 0 protostellar source IRAS 15398-3359 with ALMA. The CCH emission traces the infalling-rotating envelope near the protostar with the outflow cavity extended along the northeast-southwest axis. On the other hand, the SO emission has a compact distribution around… ▽ More We have observed the CCH (N=3-2, J=7/2-5/2, F=4-3 and 3-2) and SO (6_7-5_6) emission at a 0"2 angular resolution toward the low-mass Class 0 protostellar source IRAS 15398-3359 with ALMA. The CCH emission traces the infalling-rotating envelope near the protostar with the outflow cavity extended along the northeast-southwest axis. On the other hand, the SO emission has a compact distribution around the protostar. The CCH emission is relatively weak at the continuum peak position, while the SO emission has a sharp peak there. Although the maximum velocity shift of the CCH emission is about 1 km s^-1 from the systemic velocity, a velocity shift higher than 2 km s^{-1} is seen for the SO emission. This high velocity component is most likely associated with the Keplerian rotation around the protostar. The protostellar mass is estimated to be 0.007^{+0.004}_{-0.003} from the velocity profile of the SO emission. With this protostellar mass, the velocity structure of the CCH emission can be explained by the model of the infalling-rotating envelope, where the radius of the centrifugal barrier is estimated to be 40 au from the comparison with the model. The disk mass evaluated from the dust continuum emission by assuming the dust temperature of 20 K-100 K is 0.1-0.9 times the stellar mass, resulting in the Toomre Q parameter of 0.4-5. Hence, the disk structure may be partly unstable. All these results suggest that a rotationally-supported disk can be formed in the earliest stages of the protostellar evolution. △ Less

Submitted 3 September, 2018; originally announced September 2018.

Data-driven Exploration of New Pressure-induced Superconductivity in PbBi$_2$Te$_4$ with Two Transition Temperatures

Authors: Ryo Matsumoto, Zhufeng Hou, Masanori Nagao, Shintaro Adachi, Hiroshi Hara, Hiromi Tanaka, Kazuki Nakamura, Ryo Murakami, Sayaka Yamamoto, Hiroyuki Takeya, Tetsuo Irifune, Kiyoyuki Terakura, Yoshihiko Takano

Abstract: Candidates compounds for new thermoelectric and superconducting materials, which have narrow band gap and flat bands near band edges, were exhaustively searched by the high-throughput first-principles calculation from an inorganic materials database named AtomWork. We focused on PbBi$_2$Te$_4$ which has the similar electronic band structure and the same crystal structure with those of a pressure-i… ▽ More Candidates compounds for new thermoelectric and superconducting materials, which have narrow band gap and flat bands near band edges, were exhaustively searched by the high-throughput first-principles calculation from an inorganic materials database named AtomWork. We focused on PbBi$_2$Te$_4$ which has the similar electronic band structure and the same crystal structure with those of a pressure-induced superconductor SnBi2Se4 explored by the same data-driven approach. The PbBi$_2$Te$_4$ was successfully synthesized as single crystals using a melt and slow cooling method. The core level X-ray photoelectron spectroscopy analysis revealed Pb2+, Bi3+ and Te2- valence states in PbBi$_2$Te$_4$. The thermoelectric properties of the PbBi$_2$Te$_4$ sample were measured at ambient pressure and the electrical resistivity was also evaluated under high pressure using a diamond anvil cell with boron-doped diamond electrodes. The resistivity decreased with increase of the pressure, and two pressure-induced superconducting transitions were discovered at 3.4 K under 13.3 GPa and at 8.4 K under 21.7 GPa. The data-driven approach shows promising power to accelerate the discovery of new thermoelectric and superconducting materials. △ Less

Submitted 23 August, 2018; originally announced August 2018.

Rotation in the NGC 1333 IRAS 4C Outflow

Authors: Yichen Zhang, Aya E. Higuchi, Nami Sakai, Yoko Oya, Ana Lopez-Sepulcre, Muneaki Imai, Takeshi Sakai, Yoshimasa Watanabe, Cecilia Ceccarelli, Bertrand Lefloch, Satoshi Yamamoto

Abstract: We report molecular line observations of the NGC 1333 IRAS 4C outflow in the Perseus Molecular Cloud with the Atacama Large Millimeter/Submillimeter Array. The CCH and CS emission reveal an outflow cavity structure with clear signatures of rotation with respect to the outflow axis. The rotation is detected from about 120 au up to about 1400 au above the envelope/disk mid-plane. As the distance to… ▽ More We report molecular line observations of the NGC 1333 IRAS 4C outflow in the Perseus Molecular Cloud with the Atacama Large Millimeter/Submillimeter Array. The CCH and CS emission reveal an outflow cavity structure with clear signatures of rotation with respect to the outflow axis. The rotation is detected from about 120 au up to about 1400 au above the envelope/disk mid-plane. As the distance to the central source increases, the rotation velocity of the outflow decreases while the outflow radius increases, which gives a flat specific angular momentum distribution along the outflow. The mean specific angular momentum of the outflow is about 100 au km/s. Based on reasonable assumptions on the outward velocity of the outflow and the protostar mass, we estimate the range of outflow launching radii to be 5-15 au. Such a launching radius rules out that this outflow is launched as an X-wind, but rather, it is more consistent to be a slow disk wind launched from relatively large radii on the disk. The radius of the centrifugal barrier is roughly estimated, and the role of the centrifugal barrier in the outflow launching is discussed. △ Less

Submitted 1 August, 2018; originally announced August 2018.

Comments: Accepted to ApJ. 29 pages, 8 figures

Pressure-induced Superconductivity in Sulfur-doped SnSe Single Crystal Using Boron-doped Diamond Electrode-prefabricated Diamond Anvil Cell

Authors: Ryo Matsumoto, Hiroshi Hara, Hiromi Tanaka, Kazuki Nakamura, Noriyuki Kataoka, Sayaka Yamamoto, Aichi Yamashita, Shintaro Adachi, Tetsuo Irifune, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Sulfur-doped SnSe single crystal was successfully synthesized using a melt and slow-cooling method. The chemical composition and valence state of the obtained sample were analyzed by X-ray photoelectron spectroscopy. The pressure range of a diamond anvil cell with boron-doped diamond electrodes was upgraded to 104 GPa using nano-polycrystalline diamond anvil to investigate a pressure effect for th… ▽ More Sulfur-doped SnSe single crystal was successfully synthesized using a melt and slow-cooling method. The chemical composition and valence state of the obtained sample were analyzed by X-ray photoelectron spectroscopy. The pressure range of a diamond anvil cell with boron-doped diamond electrodes was upgraded to 104 GPa using nano-polycrystalline diamond anvil to investigate a pressure effect for the sample. Electrical resistivity measurements of sulfur-doped SnSe single crystal showed the insulator-metal-superconductor transition by applying high pressure up to 75.9 GPa. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Depletion of 15N in the center of L1544: Early transition from atomic to molecular nitrogen?

Authors: Kenji Furuya, Yoshimasa Watanabe, Takeshi Sakai, Yuri Aikawa, Satoshi Yamamoto

Abstract: We performed sensitive observations of the N15ND+(1-0) and 15NND+(1-0) lines toward the prestellar core L1544 using the IRAM 30m telescope. The lines are not detected down to 3 sigma levels in 0.2 km/s channels of around 6 mK. The non-detection provides the lower limit of the 14N/15N ratio for N2D+ of ~700-800, which is much higher than the elemental abundance ratio in the local ISM of ~200-300. T… ▽ More We performed sensitive observations of the N15ND+(1-0) and 15NND+(1-0) lines toward the prestellar core L1544 using the IRAM 30m telescope. The lines are not detected down to 3 sigma levels in 0.2 km/s channels of around 6 mK. The non-detection provides the lower limit of the 14N/15N ratio for N2D+ of ~700-800, which is much higher than the elemental abundance ratio in the local ISM of ~200-300. The result indicates that N2 is depleted in 15N in the central part of L1544, because N2D+ preferentially traces the cold dense gas, and because it is a daughter molecule of N2. In-situ chemistry is unlikely responsible for the 15N depletion in N2; neither low-temperature gas phase chemistry nor isotope selective photodissociation of N2 explains the 15N depletion; the former prefers transferring 15N to N2, while the latter requires the penetration of interstellar FUV photons into the core center. The most likely explanation is that 15N is preferentially partitioned into ices compared to 14N via the combination of isotope selective photodissociation of N2 and grain surface chemistry in the parent cloud of L1544 or in the outer regions of L1544 which are not fully shielded from the interstellar FUV radiation. The mechanism is the most efficient at the chemical transition from atomic to molecular nitrogen. In other words, our result suggests that the gas in the central part of L1544 already went trough the transition from atomic to molecular nitrogen in the earlier evolutionary stage, and that N2 is currently the primary form of gas-phase nitrogen. △ Less

Submitted 14 July, 2018; originally announced July 2018.

Comments: 5 pages, 2 figures, 2 tables, Accepted for publication in A&A Letters

Sign identification of electron and hole out-of-plane g factors by utilizing nuclear spin switch in single quantum nanostructures

Authors: R. Matsusaki, R. Kaji, S. Yamamoto, S. Adachi

Abstract: The electron and hole g factors are the key quantities for the spin manipulations in semiconductor quantum nanostructures. However, for the individual nanostructures, the separate determination including the signs of those g factors is difficult by using some methods adopted conventionally in bulks and quantum wells. We report a convenient optical method for the sign identification of out-of-plane… ▽ More The electron and hole g factors are the key quantities for the spin manipulations in semiconductor quantum nanostructures. However, for the individual nanostructures, the separate determination including the signs of those g factors is difficult by using some methods adopted conventionally in bulks and quantum wells. We report a convenient optical method for the sign identification of out-of-plane g factors in the individual quantum nanostructures, which utilizes the optically-induced nuclear spin switch. The method is demonstrated in typical single self-assembled In$_{0.75}$Al$_{0.25}$As/Al$_{0.3}$Ga$_{0.7}$As quantum dots and InAs/GaAs quantum rings, where the g factors with the opposite sign for electron and the same sign for hole are proved. △ Less

Submitted 3 July, 2018; originally announced July 2018.

Comments: 6 pages, 3 figures

Sub-arcsecond Kinematic Structure of the Outflow in the Vicinity of the Protostar in L483

Authors: Yoko Oya, Nami Sakai, Yoshimasa Watanabe, Ana Lopez-Sepulcre, Cecilia Ceccarelli, Bertrand Lefloch, Satoshi Yamamoto

Abstract: The bipolar outflow associated with the Class 0 low-mass protostellar source (IRAS 18148-0440) in L483 has been studied in the CCH and CS line emission at 245 and 262 GHz, respectively. Sub-arcsecond resolution observations of these lines have been conducted with ALMA. Structures and kinematics of the outflow cavity wall are investigated in the CS line, and are analyzed by using a parabolic model… ▽ More The bipolar outflow associated with the Class 0 low-mass protostellar source (IRAS 18148-0440) in L483 has been studied in the CCH and CS line emission at 245 and 262 GHz, respectively. Sub-arcsecond resolution observations of these lines have been conducted with ALMA. Structures and kinematics of the outflow cavity wall are investigated in the CS line, and are analyzed by using a parabolic model of an outflow. We constrain the inclination angle of the outflow to be from 75 degree to 90 degree, i.e. the outflow is blowing almost perpendicular to the line of sight. Comparing the outflow parameters derived from the model analysis with those of other sources, we confirm that the opening angle of the outflow and the gas velocity on its cavity wall correlate with the dynamical timescale of the outflows. Moreover, a hint of a rotating motion of the outflow cavity wall is found. Although the rotation motion is marginal, the specific angular momentum of the gas on the outflow cavity wall is evaluated to be comparable to or twice that of the infalling-rotating envelope of L483. △ Less

Submitted 27 June, 2018; originally announced June 2018.

A multiline study of a high-mass young stellar object in the Small Magellanic Cloud with ALMA: The detection of methanol gas at 0.2 solar metallicity

Authors: Takashi Shimonishi, Yoshimasa Watanabe, Yuri Nishimura, Yuri Aikawa, Satoshi Yamamoto, Takashi Onaka, Nami Sakai, Akiko Kawamura

Abstract: We report the results of subparsec-scale submillimeter observations towards an embedded high-mass young stellar object in the Small Magellanic Cloud (SMC) with ALMA. Complementary infrared data obtained with the AKARI satellite and the Gemini South telescope are also presented. The target infrared point source is spatially resolved into two dense molecular cloud cores; one is associated with a hig… ▽ More We report the results of subparsec-scale submillimeter observations towards an embedded high-mass young stellar object in the Small Magellanic Cloud (SMC) with ALMA. Complementary infrared data obtained with the AKARI satellite and the Gemini South telescope are also presented. The target infrared point source is spatially resolved into two dense molecular cloud cores; one is associated with a high-mass young stellar object (YSO core), while another is not associated with an infrared source (East core). The two cores are dynamically associated but show different chemical characteristics. Emission lines of CS, C33S, H2CS, SO, SO2, CH3OH, H13CO+, H13CN, SiO, and dust continuum are detected from the observed region. Tentative detection of HDS is also reported. The first detection of CH3OH in the SMC has a strong impact on our understanding of the formation of complex organic molecules in metal-poor environments. The gas temperature is estimated to be ~10 K based on the rotation analysis of CH3OH lines. The fractional abundance of CH3OH gas in the East core is estimated to be (0.5-1.5) x 10^(-8), which is comparable with or marginally higher than those of similar cold sources in our Galaxy despite a factor of five lower metallicity in the SMC. This work provides observational evidence that an organic molecule like CH3OH, which is largely formed on grain surfaces, can be produced even in a significantly lower metallicity environment compared to the solar neighborhood. A possible origin of cold CH3OH gas in the observed dense core is discussed. △ Less

Submitted 10 July, 2018; v1 submitted 19 June, 2018; originally announced June 2018.

Comments: Accepted for publication in ApJ, 18 pages, 8 figures, 3 tables

Ohno-type identities for multiple harmonic sums

Authors: Shin-ichiro Seki, Shuji Yamamoto

Abstract: We establish Ohno-type identities for multiple harmonic ($q$-)sums which generalize Hoffman's identity and Bradley's identity. Our result leads to a new proof of the Ohno-type relation for $\mathcal{A}$-finite multiple zeta values recently proved by Hirose, Imatomi, Murahara and Saito. As a further application, we give certain sum formulas for $\mathcal{A}_2$- or $\mathcal{A}_3$-finite multiple ze… ▽ More We establish Ohno-type identities for multiple harmonic ($q$-)sums which generalize Hoffman's identity and Bradley's identity. Our result leads to a new proof of the Ohno-type relation for $\mathcal{A}$-finite multiple zeta values recently proved by Hirose, Imatomi, Murahara and Saito. As a further application, we give certain sum formulas for $\mathcal{A}_2$- or $\mathcal{A}_3$-finite multiple zeta values. △ Less

Submitted 8 August, 2018; v1 submitted 12 June, 2018; originally announced June 2018.

Comments: 14 pages, Some minor corrections

MSC Class: 11M32; 11B65

A new proof of the duality of multiple zeta values and its generalizations

Authors: Shin-ichiro Seki, Shuji Yamamoto

Abstract: We give a new proof of the duality of multiple zeta values, which makes no use of the iterated integrals. The same method is also applicable to Ohno's relation for ($q$-)multiple zeta values. We give a new proof of the duality of multiple zeta values, which makes no use of the iterated integrals. The same method is also applicable to Ohno's relation for ($q$-)multiple zeta values. △ Less

Submitted 2 February, 2019; v1 submitted 12 June, 2018; originally announced June 2018.

Comments: 5 pages, to appear in Int. J. Number Theory

MSC Class: 11M32; 11B65

Open Set Domain Adaptation by Backpropagation

Authors: Kuniaki Saito, Shohei Yamamoto, Yoshitaka Ushiku, Tatsuya Harada

Abstract: Numerous algorithms have been proposed for transferring knowledge from a label-rich domain (source) to a label-scarce domain (target). Almost all of them are proposed for a closed-set scenario, where the source and the target domain completely share the class of their samples. We call the shared class the \doublequote{known class.} However, in practice, when samples in target domain are not labele… ▽ More Numerous algorithms have been proposed for transferring knowledge from a label-rich domain (source) to a label-scarce domain (target). Almost all of them are proposed for a closed-set scenario, where the source and the target domain completely share the class of their samples. We call the shared class the \doublequote{known class.} However, in practice, when samples in target domain are not labeled, we cannot know whether the domains share the class. A target domain can contain samples of classes that are not shared by the source domain. We call such classes the \doublequote{unknown class} and algorithms that work well in the open set situation are very practical. However, most existing distribution matching methods for domain adaptation do not work well in this setting because unknown target samples should not be aligned with the source. In this paper, we propose a method for an open set domain adaptation scenario which utilizes adversarial training. A classifier is trained to make a boundary between the source and the target samples whereas a generator is trained to make target samples far from the boundary. Thus, we assign two options to the feature generator: aligning them with source known samples or rejecting them as unknown target samples. This approach allows extracting features that separate unknown target samples from known target samples. Our method was extensively evaluated in domain adaptation setting and outperformed other methods with a large margin in most settings. △ Less

Submitted 6 July, 2018; v1 submitted 27 April, 2018; originally announced April 2018.

Comments: Accepted by ECCV2018

Chemical survey toward young stellar objects in the Perseus molecular cloud complex

Authors: Aya E. Higuchi, Nami Sakai, Yoshimasa Watanabe, Ana Lopez-Sepulcre, Kento Yoshida, Yoko Oya, Muneaki Imai, Yichen Zhang, Cecilia Ceccarelli, Bertrand Lefloch, Claudio Codella, Rafael Bachiller, Tomoya Hirota, Takeshi Sakai, Satoshi Yamamoto

Abstract: Chemical diversity of the gas in low-mass protostellar cores is widely recognized. In order to explore its origin, a survey of chemical composition toward 36 Class 0/I protostars in the Perseus molecular cloud complex, which are selected in an unbiased way under certain physical conditions, has been conducted with IRAM 30 m and NRO 45 m telescope. Multiple lines of C2H, c-C3H2 and CH3OH have been… ▽ More Chemical diversity of the gas in low-mass protostellar cores is widely recognized. In order to explore its origin, a survey of chemical composition toward 36 Class 0/I protostars in the Perseus molecular cloud complex, which are selected in an unbiased way under certain physical conditions, has been conducted with IRAM 30 m and NRO 45 m telescope. Multiple lines of C2H, c-C3H2 and CH3OH have been observed to characterize the chemical composition averaged over a 1000 au scale around the protostar. The derived beam-averaged column densities show significant chemical diversity among the sources, where the column density ratios of C2H/CH3OH are spread out by 2 orders of magnitude. From previous studies, the hot corino sources have abundant CH3OH but deficient C2H, their C2H/CH3OH column density ratios being relatively low. In contrast, the warm-carbon-chain chemistry (WCCC) sources are found to reveal the high C2H/CH3OH column density ratios. We find that the majority of the sources have intermediate characters between these two distinct chemistry types. A possible trend is seen between the C2H/CH3OH ratio and the distance of the source from the edge of a molecular cloud. The sources located near cloud edges or in isolated clouds tend to have a high C2H/CH3OH ratio. On the other hand, the sources having a low C2H/CH3OH ratio tend to be located in inner regions of the molecular cloud complex. This result gives an important clue to an understanding of the origin of the chemical diversity of protostellar cores in terms of environmental effects. △ Less

Submitted 23 April, 2018; originally announced April 2018.

Comments: Accepted for publication in ApJS

ALMA Observations of the IRDC Clump G34.43+00.24 MM3: Complex Organic and Deuterated Molecules

Authors: Takeshi Sakai, Takahiro Yanagida, Kenji Furuya, Yuri Aikawa, Patricio Sanhueza, Nami Sakai, Tomoya Hirota, James M. Jackson, Satoshi Yamamoto

Abstract: We have observed complex organic molecules (COMs) and deuterated species toward a hot core/corino (HC) associated with the infrared dark cloud (IRDC) clump G34.43+00.24 MM3 with the Atacama Large Millimeter/submillimeter Array (ALMA). We have detected six normal-COMs (CH3OH, CH3CHO, CH3CH2CN, CH3OCH3, HCOOCH3, and NH2CHO), one deuterated-COM (CH2DCN), and two deuterated fundamental molecules (D2CO… ▽ More We have observed complex organic molecules (COMs) and deuterated species toward a hot core/corino (HC) associated with the infrared dark cloud (IRDC) clump G34.43+00.24 MM3 with the Atacama Large Millimeter/submillimeter Array (ALMA). We have detected six normal-COMs (CH3OH, CH3CHO, CH3CH2CN, CH3OCH3, HCOOCH3, and NH2CHO), one deuterated-COM (CH2DCN), and two deuterated fundamental molecules (D2CO and DNC) toward G34.43+00.24 MM3 HC. None of these lines, except for CH3OH, are detected toward the shocked regions in our data, which suggests that COMs do not originate in shocks. The abundance of the COMs relative to CH3OH in G34.43+00.24 MM3 HC is found to be similar to those in high-mass hot cores, rather than those in hot corinos in low-mass star-forming regions. This result suggests that the physical conditions of the warm-up phase of G34.43+00.24 MM3 HC are similar to those of high-mass sources. On the other hand, the D2CO abundance relative to CH$_3$OH in G34.43+00.24 MM3 HC is higher than that of other hot cores, and seems to be comparable to that of hot corinos. The relatively high D2CO/CH3OH ratio of G34.43+00.24 MM3 HC implies a long cold starless phase of G34.43+00.24 MM3 HC. △ Less

Submitted 30 March, 2018; originally announced March 2018.

Comments: accepted to ApJ

Astrochemical evolution along star formation: Overview of the IRAM Large Program ASAI

Authors: B. Lefloch, R. Bachiller, C. Ceccarelli, J. Cernicharo, C. Codella, A. Fuente, C. Kahane, A. López-Sepulcre, M. Tafalla, C. Vastel, E. Caux, M. González-García, E. Bianchi, A. Gómez-Ruiz, J. Holdship, E. Mendoza, J. Ospina-Zamudio, L. Podio, D. Quénard, E. Roueff, N. Sakai, S. Viti, S. Yamamoto, K. Yoshida, C. Favre , et al. (5 additional authors not shown)

Abstract: Evidence is mounting that the small bodies of our Solar System, such as comets and asteroids, have at least partially inherited their chemical composition from the first phases of the Solar System formation. It then appears that the molecular complexity of these small bodies is most likely related to the earliest stages of star formation. It is therefore important to characterize and to understand… ▽ More Evidence is mounting that the small bodies of our Solar System, such as comets and asteroids, have at least partially inherited their chemical composition from the first phases of the Solar System formation. It then appears that the molecular complexity of these small bodies is most likely related to the earliest stages of star formation. It is therefore important to characterize and to understand how the chemical evolution changes with solar-type protostellar evolution. We present here the Large Program "Astrochemical Surveys At IRAM" (ASAI). Its goal is to carry out unbiased millimeter line surveys between 80 and 272 GHz of a sample of ten template sources, which fully cover the first stages of the formation process of solar-type stars, from prestellar cores to the late protostellar phase. In this article, we present an overview of the surveys and results obtained from the analysis of the 3 mm band observations. The number of detected main isotopic species barely varies with the evolutionary stage and is found to be very similar to that of massive star-forming regions. The molecular content in O- and C- bearing species allows us to define two chemical classes of envelopes, whose composition is dominated by either a) a rich content in O-rich complex organic molecules, associated with hot corino sources, or b) a rich content in hydrocarbons, typical of Warm Carbon Chain Chemistry sources. Overall, a high chemical richness is found to be present already in the initial phases of solar-type star formation. △ Less

Submitted 27 March, 2018; originally announced March 2018.

Comments: 19 pages, 7 figures, 5 Tables

Development of the poloidal Charge eXchange Recombination Spectroscopy system in Heliotron J

Authors: X. X. Lu, S. Kobayashi, T. Harada, S. Tanohira, K. Ida, S. Nishimura, Y. Narushima, D. L. Yu, L. Zang, K. Nagasaki, S. Kado, H. Okada, T. Minami, S. Ohshima, S. Yamamoto, Y. Yonemura, N. Haji, S. Watanabe, H. Okazaki, T. Kanazawa, P. Adulsiriswad, A. Ishizawa, Y. Nakamura, S. Konoshima, T. Mizuuchi

Abstract: A Charge eXchange Recombination Spectroscopy (CXRS) system designed to measure the poloidal rotation velocity is developed in Heliotron J. The poloidal CXRS system measures the carbon emission line (C VI, n=8-7, 529.05nm) and the Doppler shift of the emission line provides the information of plasma rotation velocity. A high throughput photographic-lens monochromator (F/2.8) with 0.73nm/mm dispersi… ▽ More A Charge eXchange Recombination Spectroscopy (CXRS) system designed to measure the poloidal rotation velocity is developed in Heliotron J. The poloidal CXRS system measures the carbon emission line (C VI, n=8-7, 529.05nm) and the Doppler shift of the emission line provides the information of plasma rotation velocity. A high throughput photographic-lens monochromator (F/2.8) with 0.73nm/mm dispersion is adopted to achieve high rotation velocity and temporal resolution. Since two heating neutral beams from two tangential injectors (NBI) are used as the diagnostic beams, a wide observation range (0.26<r/a<0.92) is covered by 15 sightlines with a high spatial resolution(d<r/a> < 0.06) at peripheral region (r/a>0.6). The system design and the calibration method are presented. The initial results of poloidal rotation measurement show an electron diamagnetic rotation in an NBI heated plasma, while an ion diamagnetic rotation is observed when ECH is additionally applied. The evaluated radial electric field profile shows a positive Er at plasma core region in the ECH+NBI plasma, and a negative Er in the NBI heated plasma. △ Less

Submitted 22 March, 2018; originally announced March 2018.

Comments: With 20 pages, 10 figures

MSC Class: 82D10 (Primary); 76Xxx (Secondary)

Unified evaluation of surface-enhanced resonance Raman scattering and fluorescence under strong coupling regime

Authors: Tamitake Itoh, Yuko S. Yamamoto

Abstract: We demonstrate importance of molecular multiple excitons and higher-order plasmons for both enhancement and quenching of resonance Raman and fluorescence of single dye molecule located at plasmonic hotspot under strong coupling regime. The multiple excitons induce complicated spectral changes in plasmon resonance and higher-order plasmons yield drastic quenching for both resonant Raman and fluores… ▽ More We demonstrate importance of molecular multiple excitons and higher-order plasmons for both enhancement and quenching of resonance Raman and fluorescence of single dye molecule located at plasmonic hotspot under strong coupling regime. The multiple excitons induce complicated spectral changes in plasmon resonance and higher-order plasmons yield drastic quenching for both resonant Raman and fluorescence. A coupled oscillator model composed of plasmon and multiple excitons reproduces the complicated spectral changes. Purcell factors derived from higher-order plasmons reproduce the drastic quenching with considering ultra-fast surface enhanced fluorescence. △ Less

Submitted 3 March, 2018; originally announced March 2018.

Comments: 18 pages, 4 figures

MSC Class: 78-05

Journal ref: The Journal of chemical physics 149 (24), 244701 (2018)

Chemistry of a newly detected circumbinary disk in Ophiuchus

Authors: E. Artur de la Villarmois, L. E. Kristensen, J. K. Jørgensen, E. A. Bergin, C. Brinch, S. Frimann, D. Harsono, N. Sakai, S. Yamamoto

Abstract: (Abridged) Astronomers recently started discovering exoplanets around binary systems. Therefore, understanding the formation and evolution of circumbinary disks is crucial for a complete scenario of planet formation. The aim of this paper is to present the detection of a circumbinary disk around Oph-IRS67 and analyse its structure. We present high-angular-resolution (0.4", 60 AU) observations of C… ▽ More (Abridged) Astronomers recently started discovering exoplanets around binary systems. Therefore, understanding the formation and evolution of circumbinary disks is crucial for a complete scenario of planet formation. The aim of this paper is to present the detection of a circumbinary disk around Oph-IRS67 and analyse its structure. We present high-angular-resolution (0.4", 60 AU) observations of C17O, H13CO+ , C34S, SO2, C2H and c-C3H2 molecular transitions with ALMA at 0.8 mm. The spectrally and spatially resolved maps reveal the kinematics of the circumbinary disk as well as its chemistry. Molecular abundances are estimated using RADEX. The continuum emission reveals the presence of a circumbinary disk around the two sources. This disk has a diameter of ~620 AU and is well traced by C17O and H13CO+ emission. C2H and c-C3H2 trace a higher-density region which is spatially offset from the sources (~430 AU). Finally, SO2 shows compact emission around one of the sources, Oph-IRS67 B. The molecular transitions which trace the circumbinary disk are consistent with a Keplerian profile on disk scales (< 200 AU) and an infalling profile for envelope scales (> 200 AU). The Keplerian fit leads to a mass of 2.2 Msun. Inferred CO abundances w.r.t. H2 are comparable to the canonical ISM value of 2.7e-4. This study proves the first detection of the circumbinary disk associated with Oph-IRS67. The disk is chemically differentiated from the nearby high-density region. The lack of methanol emission suggests the extended disk dominates the mass budget in the inner- most regions of the protostellar envelope, generating a flat density profile where less material is exposed to high temperatures. Thus, complex organic molecules would be associated with lower column densities. Finally, Oph-IRS67 is a promising candidate for the detection of both circumstellar disks with higher-angular-resolution observations. △ Less

Submitted 26 February, 2018; originally announced February 2018.

Comments: 19 pages, 14 figures, 6 tables

Journal ref: A&A 614, A26 (2018)

Seeds of Life in Space (SOLIS). III. Zooming into the methanol peak of the pre-stellar core L1544

Authors: Anna Punanova, Paola Caselli, Siyi Feng, Ana Chacón-Tanarro, Cecilia Ceccarelli, Roberto Neri, Francesco Fontani, Izaskun Jiménez-Serra, Charlotte Vastel, Luca Bizzocchi, Andy Pon, Anton I. Vasyunin, Silvia Spezzano, Pierre Hily-Blant, Leonardo Testi, Serena Viti, Satoshi Yamamoto, Felipe Alves, Rafael Bachiller, Nadia Balucani, Eleonora Bianchi, Sandrine Bottinelli, Emmanuel Caux, Rumpa Choudhury, Claudio Codella , et al. (19 additional authors not shown)

Abstract: Towards the pre-stellar core L1544, the methanol (CH$_3$OH) emission forms an asymmetric ring around the core centre, where CH$_3$OH is mostly in solid form, with a clear peak 4000~au to the north-east of the dust continuum peak. As part of the NOEMA Large Project SOLIS (Seeds of Life in Space), the CH$_3$OH peak has been spatially resolved to study its kinematics and physical structure and to inv… ▽ More Towards the pre-stellar core L1544, the methanol (CH$_3$OH) emission forms an asymmetric ring around the core centre, where CH$_3$OH is mostly in solid form, with a clear peak 4000~au to the north-east of the dust continuum peak. As part of the NOEMA Large Project SOLIS (Seeds of Life in Space), the CH$_3$OH peak has been spatially resolved to study its kinematics and physical structure and to investigate the cause behind the local enhancement. We find that methanol emission is distributed in a ridge parallel to the main axis of the dense core. The centroid velocity increases by about 0.2~km~s$^{-1}$ and the velocity dispersion increases from subsonic to transonic towards the central zone of the core, where the velocity field also shows complex structure. This could be indication of gentle accretion of material onto the core or interaction of two filaments, producing a slow shock. We measure the rotational temperature and show that methanol is in local thermodynamic equilibrium (LTE) only close to the dust peak, where it is significantly depleted. The CH$_3$OH column density, $N_{tot}({\rm CH_3OH})$, profile has been derived with non-LTE radiative transfer modelling and compared with chemical models of a static core. The measured $N_{tot}({\rm CH_3OH})$ profile is consistent with model predictions, but the total column densities are one order of magnitude lower than those predicted by models, suggesting that the efficiency of reactive desorption or atomic hydrogen tunnelling adopted in the model may be overestimated; or that an evolutionary model is needed to better reproduce methanol abundance. △ Less

Submitted 2 February, 2018; originally announced February 2018.

Comments: 19 pages, 18 figures. Accepted by ApJ

Chemical and Physical Picture of IRAS 16293-2422 Source B at a Sub-arcsecond Scale Studied with ALMA

Authors: Yoko Oya, Kana Moriwaki, Shusuke Onishi, Nami Sakai, Ana López-Sepulcre, Cécile Favre, Yoshimasa Watanabe, Cecilia Ceccarelli, Bertrand Lefloch, Satoshi Yamamoto

Abstract: We have analyzed the OCS, H$_2$CS, CH$_3$OH, and HCOOCH$_3$ data observed toward the low-mass protostar IRAS 16293--2422 Source B at a sub-arcsecond resolution with ALMA. A clear chemical differentiation is seen in their distributions; OCS and H$_2$CS are extended with a slight rotation signature, while CH$_3$OH and HCOOCH$_3$ are concentrated near the protostar. Such a chemical change in the vici… ▽ More We have analyzed the OCS, H$_2$CS, CH$_3$OH, and HCOOCH$_3$ data observed toward the low-mass protostar IRAS 16293--2422 Source B at a sub-arcsecond resolution with ALMA. A clear chemical differentiation is seen in their distributions; OCS and H$_2$CS are extended with a slight rotation signature, while CH$_3$OH and HCOOCH$_3$ are concentrated near the protostar. Such a chemical change in the vicinity of the protostar is similar to the companion (Source A) case. The extended component is interpreted by the infalling-rotating envelope model with a nearly face-on configuration. The radius of the centrifugal barrier of the infalling-rotating envelope is roughly evaluated to be ($30-50$) au. The observed lines show the inverse P-Cygni profile, indicating the infall motion with in a few 10 au from the protostar. The nearly pole-on geometry of the outflow lobes is inferred from the SiO distribution, and thus, the infalling and outflowing motions should coexist along the line-of-sight to the protostar. This implies that the infalling gas is localized near the protostar and the current launching points of the outflow have an offset from the protostar. A possible mechanism for this configuration is discussed. △ Less

Submitted 14 January, 2018; v1 submitted 12 January, 2018; originally announced January 2018.

Comments: 49 pages, 20 figures

Construction of KAGRA: an Underground Gravitational Wave Observatory

Authors: T. Akutsu, M. Ando, S. Araki, A. Araya, T. Arima, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, L. Baiotti, M. A. Barton, D. Chen, K. Cho, K. Craig, R. DeSalvo, K. Doi, K. Eda, Y. Enomoto, R. Flaminio, S. Fujibayashi, Y. Fujii, M. -K. Fujimoto, M. Fukushima, T. Furuhata , et al. (202 additional authors not shown)

Abstract: Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet… ▽ More Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel. △ Less

Submitted 11 December, 2017; v1 submitted 30 November, 2017; originally announced December 2017.

Comments: Resolution of some figures has been decreased from its original version submitted to a journal

Journal ref: Progress of Theoretical and Experimental Physics, Vol 2018, 1, 013F01

Hierarchical Video Generation from Orthogonal Information: Optical Flow and Texture

Authors: Katsunori Ohnishi, Shohei Yamamoto, Yoshitaka Ushiku, Tatsuya Harada

Abstract: Learning to represent and generate videos from unlabeled data is a very challenging problem. To generate realistic videos, it is important not only to ensure that the appearance of each frame is real, but also to ensure the plausibility of a video motion and consistency of a video appearance in the time direction. The process of video generation should be divided according to these intrinsic diffi… ▽ More Learning to represent and generate videos from unlabeled data is a very challenging problem. To generate realistic videos, it is important not only to ensure that the appearance of each frame is real, but also to ensure the plausibility of a video motion and consistency of a video appearance in the time direction. The process of video generation should be divided according to these intrinsic difficulties. In this study, we focus on the motion and appearance information as two important orthogonal components of a video, and propose Flow-and-Texture-Generative Adversarial Networks (FTGAN) consisting of FlowGAN and TextureGAN. In order to avoid a huge annotation cost, we have to explore a way to learn from unlabeled data. Thus, we employ optical flow as motion information to generate videos. FlowGAN generates optical flow, which contains only the edge and motion of the videos to be begerated. On the other hand, TextureGAN specializes in giving a texture to optical flow generated by FlowGAN. This hierarchical approach brings more realistic videos with plausible motion and appearance consistency. Our experiments show that our model generates more plausible motion videos and also achieves significantly improved performance for unsupervised action classification in comparison to previous GAN works. In addition, because our model generates videos from two independent information, our model can generate new combinations of motion and attribute that are not seen in training data, such as a video in which a person is doing sit-up in a baseball ground. △ Less

Submitted 1 December, 2017; v1 submitted 27 November, 2017; originally announced November 2017.

Comments: Our supplemental material is available on http://www.mi.t.u-tokyo.ac.jp/assets/publication/hierarchical_video_generation_sup/ Accepted to AAAI2018

First demonstration of gamma-ray imaging using balloon-borne emulsion telescope

Authors: Hiroki Rokujo, Shigeki Aoki, Kaname Hamada, Toshio Hara, Tatsuki Inoue, Katsumi Ishiguro, Atsushi Iyono, Hiroaki Kawahara, Koichi Kodama, Ryosuke Komatani, Masahiro Komatsu, Tetsuya Kosaka, Fukashi Mizutani, Motoaki Miyanishi, Kunihiro Morishima, Misaki Morishita, Mitsuhiro Nakamura, Toshiyuki Nakano, Akira Nishio, Kimio Niwa, Naoto Otsuka, Keita Ozaki, Osamu Sato, Emi Shibayama, Satoru Takahashi , et al. (8 additional authors not shown)

Abstract: We promote the precise gamma-ray observation project Gamma-Ray Astro-Imager with Nuclear Emulsion (GRAINE), which uses balloon-borne emulsion gamma-ray telescopes. The emulsion telescope realizes observations with high angular resolution, polarization sensitivity, and large aperture area in the 0.01--100 GeV energy region. Herein, we report the data analysis of emulsion tracks and the first demons… ▽ More We promote the precise gamma-ray observation project Gamma-Ray Astro-Imager with Nuclear Emulsion (GRAINE), which uses balloon-borne emulsion gamma-ray telescopes. The emulsion telescope realizes observations with high angular resolution, polarization sensitivity, and large aperture area in the 0.01--100 GeV energy region. Herein, we report the data analysis of emulsion tracks and the first demonstration of gamma-ray imaging via an emulsion telescope by using the flight data from the balloon experiment performed in 2015 (GRAINE 2015). The emulsion films were scanned by the latest read-out system for a total area of 41 m$^2$ in three months, and then the gamma-ray event selection was automatically processed. Millions of electron-pair events are accumulated in the balloon-borne emulsion telescope. The emulsion telescope detected signals from a calibration source (gamma rays from the interaction of cosmic rays with an aluminum plate) with a high significance during the balloon observation and created a gamma-ray image consistent with the source size and the expected angular resolution in the energy range of 100--300 MeV. The flight performance obtained in the GRAINE 2015 experiment proves that balloon-borne emulsion telescope experiments with larger area are feasible while maintaining expected imaging performance. △ Less

Submitted 21 April, 2018; v1 submitted 5 November, 2017; originally announced November 2017.

Comments: 21 pages, 18 figures

Seeds Of Life In Space (SOLIS): The organic composition diversity at 300--1000 au scale in Solar-type star forming regions

Authors: C. Ceccarelli, P. Caselli, F. Fontani, R. Neri, A. Lopez-Sepulcre, C. Codella, S. Feng, I. Jimenez-Serra, B. Lefloch, J. E. Pineda, C. Vastel, F. Alves, R. Bachiller, N. Balucani, E. Bianchi, L. Bizzocchi, S. Bottinelli, E. Caux, A. Chacon-Tanarro, R. Choudhury, A. Coutens, F. Dulieu, C. Favre, P. Hily-Blant, J. Holdship , et al. (21 additional authors not shown)

Abstract: Complex organic molecules have been observed for decades in the interstellar medium. Some of them might be considered as small bricks of the macromolecules at the base of terrestrial life. It is hence particularly important to understand organic chemistry in Solar-like star forming regions. In this article, we present a new observational project: SOLIS (Seeds Of Life In Space). This is a Large Pro… ▽ More Complex organic molecules have been observed for decades in the interstellar medium. Some of them might be considered as small bricks of the macromolecules at the base of terrestrial life. It is hence particularly important to understand organic chemistry in Solar-like star forming regions. In this article, we present a new observational project: SOLIS (Seeds Of Life In Space). This is a Large Project at the IRAM-NOEMA interferometer, and its scope is to image the emission of several crucial organic molecules in a sample of Solar-like star forming regions in different evolutionary stage and environments. Here, we report the first SOLIS results, obtained from analysing the spectra of different regions of the Class 0 source NGC1333-IRAS4A, the protocluster OMC-2 FIR4, and the shock site L1157-B1. The different regions were identified based on the images of formamide (NH2CHO) and cyanodiacetylene (HC5N) lines. We discuss the observed large diversity in the molecular and organic content, both on large (3000-10000 au) and relatively small (300-1000 au) scales. Finally, we derive upper limits to the methoxy fractional abundance in the three observed regions of the same order of magnitude of that measured in few cold prestellar objects, namely ~10^-12-10^-11 with respect to H2 molecules. △ Less

Submitted 28 October, 2017; originally announced October 2017.

Comments: Accepted for publication on The Astrophysical Journal

The status of KAGRA underground cryogenic gravitational wave telescope

Authors: KAGRA Collaboration, T. Akutsu, M. Ando, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, M. A. Barton, K. Cannon, K. Craig, W. Creus, K. Doi, K. Eda, Y. Enomoto, R. Flaminio, Y. Fujii, M. -K. Fujimoto, T. Furuhata, S. Haino, K. Hasegawa, K. Hashino, K. Hayama, S. Hirobayashi , et al. (126 additional authors not shown)

Abstract: KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial ph… ▽ More KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial phase operation of the interferometer with a simple 3-km Michelson configuration have been completed. The first cryogenic operation is expected in 2018, and the observing runs with a full interferometer are expected in 2020s. The basic interferometer configuration and the current status of KAGRA are described. △ Less

Submitted 13 October, 2017; originally announced October 2017.

Comments: 7 pages, 2 figures. Proceedings for XV International Conference on Topics in Astroparticle and Underground Physics (TAUP2017), Sudbury, July 24-28, 2017

Report number: JGW-P1707191

Journal ref: J. Phys.: Conf. Ser. 1342, 012014 (2020)

Investigation of in-plane nuclear field formation in single self-assembled quantum dots

Authors: S. Yamamoto, R. Matsusaki, R. Kaji, S. Adachi

Abstract: We studied the formation mechanism of the in-plane nuclear field in single self-assembled In$_{0.75}$Al$_{0.25}$As/Al$_{0.3}$Ga$_{0.7}$As quantum dots. The Hanle curves with an anomalously large width and hysteretic behavior at the critical transverse magnetic field were observed in many single quantum dots grown in the same QD sample. In order to explain the anomalies in the Hanle curve indicatin… ▽ More We studied the formation mechanism of the in-plane nuclear field in single self-assembled In$_{0.75}$Al$_{0.25}$As/Al$_{0.3}$Ga$_{0.7}$As quantum dots. The Hanle curves with an anomalously large width and hysteretic behavior at the critical transverse magnetic field were observed in many single quantum dots grown in the same QD sample. In order to explain the anomalies in the Hanle curve indicating the formation of a large nuclear field perpendicular to the photo-injected electron spin polarization, we propose a new model based on the current phenomenological model for dynamic nuclear spin polarization. The model includes the effects of the nuclear quadrupole interaction and the sign inversion between in-plane and out-of-plane g-factors, and the model calculations reproduce successfully the characteristics of the observed anomalies in the Hanle curves. △ Less

Submitted 1 October, 2017; originally announced October 2017.

Comments: 7 pages, 6 figures

Journal ref: Phys. Rev. B 97, 075309 (2018)

Boosting the kernelized shapelets: Theory and algorithms for local features

Authors: Daiki Suehiro, Kohei Hatano, Eiji Takimoto, Shuji Yamamoto, Kenichi Bannai, Akiko Takeda

Abstract: We consider binary classification problems using local features of objects. One of motivating applications is time-series classification, where features reflecting some local closeness measure between a time series and a pattern sequence called shapelet are useful. Despite the empirical success of such approaches using local features, the generalization ability of resulting hypotheses is not fully… ▽ More We consider binary classification problems using local features of objects. One of motivating applications is time-series classification, where features reflecting some local closeness measure between a time series and a pattern sequence called shapelet are useful. Despite the empirical success of such approaches using local features, the generalization ability of resulting hypotheses is not fully understood and previous work relies on a bunch of heuristics. In this paper, we formulate a class of hypotheses using local features, where the richness of features is controlled by kernels. We derive generalization bounds of sparse ensembles over the class which is exponentially better than a standard analysis in terms of the number of possible local features. The resulting optimization problem is well suited to the boosting approach and the weak learning problem is formulated as a DC program, for which practical algorithms exist. In preliminary experiments on time-series data sets, our method achieves competitive accuracy with the state-of-the-art algorithms with small parameter-tuning cost. △ Less

Submitted 6 September, 2017; v1 submitted 5 September, 2017; originally announced September 2017.

Comments: 16 pages, 1 figures

Molecular-Cloud-Scale Chemical Composition II: Map** Spectral Line Survey toward W3(OH) in the 3 mm Band

Authors: Yuri Nishimura, Yoshimasa Watanabe, Nanase Harada, Takashi Shimonishi, Nami Sakai, Yuri Aikawa, Akiko Kawamura, Satoshi Yamamoto

Abstract: In order to study a molecular-cloud-scale chemical composition, we have conducted a map** spectral line survey toward the Galactic molecular cloud W3(OH), which is one of the most active star forming regions in the Perseus arm, with the NRO 45 m telescope. We have observed the area of 16' $\times$ 16', which corresponds to 9.0 pc $\times$ 9.0 pc. The observed frequency ranges are 87--91, 96--103… ▽ More In order to study a molecular-cloud-scale chemical composition, we have conducted a map** spectral line survey toward the Galactic molecular cloud W3(OH), which is one of the most active star forming regions in the Perseus arm, with the NRO 45 m telescope. We have observed the area of 16' $\times$ 16', which corresponds to 9.0 pc $\times$ 9.0 pc. The observed frequency ranges are 87--91, 96--103, and 108--112 GHz. We have prepared the spectrum averaged over the observed area, in which 8 molecular species CCH, HCN, HCO$^+$, HNC, CS, SO, C$^{18}$O, and $^{13}$CO are identified. On the other hand, the spectrum of the W3(OH) hot core observed at a 0.17 pc resolution shows the lines of various molecules such as OCS, H$_2$CS CH$_3$CCH, and CH$_3$CN, in addition to the above species. In the spatially averaged spectrum, emission of the species concentrated just around the star-forming core such as CH$_3$OH and HC$_3$N is fainter than in the hot core spectrum, whereas emission of the species widely extended over the cloud such as CCH is relatively brighter. We have classified the observed area into 5 subregions according to the integrated intensity of $^{13}$CO, and have evaluated the contribution to the averaged spectrum from each subregion. The CCH, HCN, HCO$^+$, and CS lines can be seen even in the spectrum of the subregion with the lowest $^{13}$CO integrated intensity range ($< 10$ K km s$^{-1}$). Thus, the contributions of the spatially extended emission is confirmed to be dominant in the spatially averaged spectrum. △ Less

Submitted 31 August, 2017; originally announced August 2017.

Comments: 21 pages, 16 figures, 5 tables. Accepted for publication in ApJ

Discovery of Striking Difference of Molecular-Emission-Line Richness in the Potential Proto-Binary System NGC 2264 CMM3

Authors: Yoshimasa Watanabe, Nami Sakai, Ana Lopez-Sepulcre, Takeshi Sakai, Tomoya Hirota, Sheng-Yuan Liu, Yu-Nung Su, Satoshi Yamamoto

Abstract: We have conducted an interferometric line survey in the 0.8 mm band toward the young high-mass protostar candidate NGC 2264 CMM3 with ALMA. CMM3 is resolved into the two continuum peaks, CMM3A and CMM3B, at an angular separation of 0.9". Thus, CMM3 is found to be a binary system candidate. We have detected molecular outflows associated with CMM3A and CMM3B each, indicating active star formation. I… ▽ More We have conducted an interferometric line survey in the 0.8 mm band toward the young high-mass protostar candidate NGC 2264 CMM3 with ALMA. CMM3 is resolved into the two continuum peaks, CMM3A and CMM3B, at an angular separation of 0.9". Thus, CMM3 is found to be a binary system candidate. We have detected molecular outflows associated with CMM3A and CMM3B each, indicating active star formation. In addition to the two peaks, six faint continuum peaks are detected around CMM3A and CMM3B, most of which are thought to be evolved low-mass protostars. CMM3A is found to be rich in molecular line emission including complex organic molecules such as HCOOCH3 and CH3OCH3. The emission of complex organic molecules is distributed within a compact region around the continuum peak of CMM3A. Hence, CMM3A apparently harbors a hot core. On the other hand, CMM3B is deficient in molecular line emission, although its continuum flux is almost comparable to that of CMM3A. Possible origins of the striking difference between CMM3A and CMM3B are discussed. △ Less

Submitted 24 August, 2017; originally announced August 2017.

Comments: Accepted for publication in ApJ, 7 figures, 2 tables