Showing 51–100 of 102 results for author: Xiong, F

Searching spin-mass interaction using a diamagnetic levitated magnetic resonance force sensor

Authors: Fang Xiong, Tong Wu, Yingchun Leng, Rui Li, Changkui Duan, Xi Kong, Pu Huang, Zhengwei Li, Yu Gao, Xing Rong, Jiangfeng Du

Abstract: Axion-like particles (ALPs) are predicted to mediate exotic interactions between spin and mass. We propose an ALP-searching experiment based on the levitated micromechanical oscillator, which is one of the most sensitive sensors for spin-mass forces at a short distance. The proposed experiment tests the spin-mass resonant interaction between the polarized electron spins and a diamagnetically levit… ▽ More Axion-like particles (ALPs) are predicted to mediate exotic interactions between spin and mass. We propose an ALP-searching experiment based on the levitated micromechanical oscillator, which is one of the most sensitive sensors for spin-mass forces at a short distance. The proposed experiment tests the spin-mass resonant interaction between the polarized electron spins and a diamagnetically levitated microsphere. By periodically flip** the electron spins, the contamination from nonresonant background forces can be eliminated. The levitated microoscillator can prospectively enhance the sensitivity by nearly $10^3$ times over current experiments for ALPs with mass in the range 4 meV to 0.4 eV. △ Less

Submitted 7 March, 2021; v1 submitted 27 October, 2020; originally announced October 2020.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. Research 3, 013205 (2021)

Mechanical dissipation below 1$μ$Hz with a cryogenic diamagnetic-levitated micro-oscillator

Authors: Yingchun Leng, Rui Li, Xi Kong, Han Xie, Di Zheng, Peiran Yin, Fang Xiong, Tong Wu, Chang Kui Duan, Youwei Du, Zhang qi Yin, Pu Huang, Jiangfeng Du

Abstract: Ultralow dissipation plays an important role in sensing applications and exploring macroscopic quantum phenomena using micro-and nano-mechanical systems. We report a diamagnetic-levitated micro-mechanical oscillator operating at a low temperature of 3K with measured dissipation as low as 0.59 $μ$Hz and a quality factor as high as $2 \times 10^7$. To the best of our knowledge the achieved dissipati… ▽ More Ultralow dissipation plays an important role in sensing applications and exploring macroscopic quantum phenomena using micro-and nano-mechanical systems. We report a diamagnetic-levitated micro-mechanical oscillator operating at a low temperature of 3K with measured dissipation as low as 0.59 $μ$Hz and a quality factor as high as $2 \times 10^7$. To the best of our knowledge the achieved dissipation is the lowest in micro- and nano-mechanical systems to date, orders of magnitude improvement over the reported state-of-the-art systems based on different principles. The cryogenic diamagnetic-levitated oscillator described here is applicable to a wide range of mass, making it a good candidate for measuring both force and acceleration with ultra-high sensitivity. By virtue of the naturally existing strong magnetic gradient, this system has great potential in quantum spin mechanics study. △ Less

Submitted 18 August, 2020; v1 submitted 18 August, 2020; originally announced August 2020.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Applied 15, 024061 (2021)

ECML: An Ensemble Cascade Metric Learning Mechanism towards Face Verification

Authors: Fu Xiong, Yang Xiao, Zhiguo Cao, Yancheng Wang, Joey Tianyi Zhou, Jianxi Wu

Abstract: Face verification can be regarded as a 2-class fine-grained visual recognition problem. Enhancing the feature's discriminative power is one of the key problems to improve its performance. Metric learning technology is often applied to address this need, while achieving a good tradeoff between underfitting and overfitting plays the vital role in metric learning. Hence, we propose a novel ensemble c… ▽ More Face verification can be regarded as a 2-class fine-grained visual recognition problem. Enhancing the feature's discriminative power is one of the key problems to improve its performance. Metric learning technology is often applied to address this need, while achieving a good tradeoff between underfitting and overfitting plays the vital role in metric learning. Hence, we propose a novel ensemble cascade metric learning (ECML) mechanism. In particular, hierarchical metric learning is executed in the cascade way to alleviate underfitting. Meanwhile, at each learning level, the features are split into non-overlap** groups. Then, metric learning is executed among the feature groups in the ensemble manner to resist overfitting. Considering the feature distribution characteristics of faces, a robust Mahalanobis metric learning method (RMML) with closed-form solution is additionally proposed. It can avoid the computation failure issue on inverse matrix faced by some well-known metric learning approaches (e.g., KISSME). Embedding RMML into the proposed ECML mechanism, our metric learning paradigm (EC-RMML) can run in the one-pass learning manner. Experimental results demonstrate that EC-RMML is superior to state-of-the-art metric learning methods for face verification. And, the proposed ensemble cascade metric learning mechanism is also applicable to other metric learning approaches. △ Less

Submitted 11 July, 2020; originally announced July 2020.

Comments: Accepted to IEEE Transaction on Cybernetics

Studying Product Competition Using Representation Learning

Authors: Fanglin Chen, Xiao Liu, Davide Proserpio, Isamar Troncoso, Feiyu Xiong

Abstract: Studying competition and market structure at the product level instead of brand level can provide firms with insights on cannibalization and product line optimization. However, it is computationally challenging to analyze product-level competition for the millions of products available on e-commerce platforms. We introduce Product2Vec, a method based on the representation learning algorithm Word2V… ▽ More Studying competition and market structure at the product level instead of brand level can provide firms with insights on cannibalization and product line optimization. However, it is computationally challenging to analyze product-level competition for the millions of products available on e-commerce platforms. We introduce Product2Vec, a method based on the representation learning algorithm Word2Vec, to study product-level competition, when the number of products is large. The proposed model takes shop** baskets as inputs and, for every product, generates a low-dimensional embedding that preserves important product information. In order for the product embeddings to be useful for firm strategic decision making, we leverage economic theories and causal inference to propose two modifications to Word2Vec. First of all, we create two measures, complementarity and exchangeability, that allow us to determine whether product pairs are complements or substitutes. Second, we combine these vectors with random utility-based choice models to forecast demand. To accurately estimate price elasticities, i.e., how demand responds to changes in price, we modify Word2Vec by removing the influence of price from the product vectors. We show that, compared with state-of-the-art models, our approach is faster, and can produce more accurate demand forecasts and price elasticities. △ Less

Submitted 20 May, 2020; originally announced May 2020.

Comments: 8 pages, to be published in SIGIR '20

3DV: 3D Dynamic Voxel for Action Recognition in Depth Video

Authors: Yancheng Wang, Yang Xiao, Fu Xiong, Wenxiang Jiang, Zhiguo Cao, Joey Tianyi Zhou, Junsong Yuan

Abstract: To facilitate depth-based 3D action recognition, 3D dynamic voxel (3DV) is proposed as a novel 3D motion representation. With 3D space voxelization, the key idea of 3DV is to encode 3D motion information within depth video into a regular voxel set (i.e., 3DV) compactly, via temporal rank pooling. Each available 3DV voxel intrinsically involves 3D spatial and motion feature jointly. 3DV is then abs… ▽ More To facilitate depth-based 3D action recognition, 3D dynamic voxel (3DV) is proposed as a novel 3D motion representation. With 3D space voxelization, the key idea of 3DV is to encode 3D motion information within depth video into a regular voxel set (i.e., 3DV) compactly, via temporal rank pooling. Each available 3DV voxel intrinsically involves 3D spatial and motion feature jointly. 3DV is then abstracted as a point set and input into PointNet++ for 3D action recognition, in the end-to-end learning way. The intuition for transferring 3DV into the point set form is that, PointNet++ is lightweight and effective for deep feature learning towards point set. Since 3DV may lose appearance clue, a multi-stream 3D action recognition manner is also proposed to learn motion and appearance feature jointly. To extract richer temporal order information of actions, we also divide the depth video into temporal splits and encode this procedure in 3DV integrally. The extensive experiments on 4 well-established benchmark datasets demonstrate the superiority of our proposition. Impressively, we acquire the accuracy of 82.4% and 93.5% on NTU RGB+D 120 [13] with the cross-subject and crosssetup test setting respectively. 3DV's code is available at https://github.com/3huo/3DV-Action. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: Accepted by CVPR2020

Enhanced principle component method for fringe removal in cold atom images

Authors: Feng Xiong, Yun Long, Colin V. Parker

Abstract: Many powerful imaging techniques for cold atoms are based on determining the optical density by comparing a beam image having passed through the atom cloud to a reference image taken under similar conditions with no atoms. In practice the beam profile typically contains interference fringes whose phase is not stable between camera exposures. To reduce the error of these fringes in the computed opt… ▽ More Many powerful imaging techniques for cold atoms are based on determining the optical density by comparing a beam image having passed through the atom cloud to a reference image taken under similar conditions with no atoms. In practice the beam profile typically contains interference fringes whose phase is not stable between camera exposures. To reduce the error of these fringes in the computed optical density, an algorithm based on principle component analysis (PCA) is often employed. However, PCA is general purpose and not tailored to the specific case of interference fringes. Here we demonstrate an algorithm that takes advantage of the Fourier-space structure of interference fringes to further reduce the residual fringe signatures in the optical density. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Measuring Generalisation to Unseen Viewpoints, Articulations, Shapes and Objects for 3D Hand Pose Estimation under Hand-Object Interaction

Authors: Anil Armagan, Guillermo Garcia-Hernando, Seungryul Baek, Shreyas Hampali, Mahdi Rad, Zhaohui Zhang, Shipeng Xie, MingXiu Chen, Boshen Zhang, Fu Xiong, Yang Xiao, Zhiguo Cao, Junsong Yuan, Pengfei Ren, Weiting Huang, Haifeng Sun, Marek Hrúz, Jakub Kanis, Zdeněk Krňoul, Qingfu Wan, Shile Li, Linlin Yang, Dongheui Lee, Angela Yao, Weiguo Zhou , et al. (10 additional authors not shown)

Abstract: We study how well different types of approaches generalise in the task of 3D hand pose estimation under single hand scenarios and hand-object interaction. We show that the accuracy of state-of-the-art methods can drop, and that they fail mostly on poses absent from the training set. Unfortunately, since the space of hand poses is highly dimensional, it is inherently not feasible to cover the whole… ▽ More We study how well different types of approaches generalise in the task of 3D hand pose estimation under single hand scenarios and hand-object interaction. We show that the accuracy of state-of-the-art methods can drop, and that they fail mostly on poses absent from the training set. Unfortunately, since the space of hand poses is highly dimensional, it is inherently not feasible to cover the whole space densely, despite recent efforts in collecting large-scale training datasets. This sampling problem is even more severe when hands are interacting with objects and/or inputs are RGB rather than depth images, as RGB images also vary with lighting conditions and colors. To address these issues, we designed a public challenge (HANDS'19) to evaluate the abilities of current 3D hand pose estimators (HPEs) to interpolate and extrapolate the poses of a training set. More exactly, HANDS'19 is designed (a) to evaluate the influence of both depth and color modalities on 3D hand pose estimation, under the presence or absence of objects; (b) to assess the generalisation abilities w.r.t. four main axes: shapes, articulations, viewpoints, and objects; (c) to explore the use of a synthetic hand model to fill the gaps of current datasets. Through the challenge, the overall accuracy has dramatically improved over the baseline, especially on extrapolation tasks, from 27mm to 13mm mean joint error. Our analyses highlight the impacts of: Data pre-processing, ensemble approaches, the use of a parametric 3D hand model (MANO), and different HPE methods/backbones. △ Less

Submitted 10 September, 2020; v1 submitted 30 March, 2020; originally announced March 2020.

Comments: European Conference on Computer Vision (ECCV), 2020

Exact dynamics and thermalization of open quantum systems coupled to reservoir through particle exchanges

Authors: Fei-Lei Xiong, Wei-Min Zhang

Abstract: In this paper, we study the exact dynamics of general open systems interacting with its environment through particle exchanges. The paper includes two main results. First, by taking advantage of the propagating function in the coherent state representation, we solve the exact master equation, whose solution is expressed in terms of the Keldysh nonequilibrium Green functions. Second, in the dynamic… ▽ More In this paper, we study the exact dynamics of general open systems interacting with its environment through particle exchanges. The paper includes two main results. First, by taking advantage of the propagating function in the coherent state representation, we solve the exact master equation, whose solution is expressed in terms of the Keldysh nonequilibrium Green functions. Second, in the dynamical perspective, we provide a rigorous thermalization process of open quantum systems. △ Less

Submitted 21 March, 2020; originally announced March 2020.

Comments: 12 pages

Journal ref: Phys. Rev. A 102, 022215 (2020)

Simulation of Dynamical Quantum Phase Transition of the 1D Transverse Ising Model with a Double-chain Bose-Hubbard model

Authors: Ren Liao, Fangyu Xiong, Xuzong Chen

Abstract: We propose a spinless Bose-Hubbard model in an one-dimensional (1D) double-chain tilted lattice at unit filling per cell. A subspace of this model can be faithfully mapped to the 1D transverse Ising model through superexchange interaction with second-order perturbation theory. At a valid parameter region, numerical results show good agreement of these two models both on energy spectrums and correl… ▽ More We propose a spinless Bose-Hubbard model in an one-dimensional (1D) double-chain tilted lattice at unit filling per cell. A subspace of this model can be faithfully mapped to the 1D transverse Ising model through superexchange interaction with second-order perturbation theory. At a valid parameter region, numerical results show good agreement of these two models both on energy spectrums and correlation functions. And we show that the dynamical quantum phase transition of the effective 1D transverse Ising model can be simulated. With carefully designed procedures for producing the dynamical quantum phase transition of the 1D transverse Ising model from a Mott insulator, the rate function of the recurrence probability to the ground-state manifold shows the same nonanalyticality at periodic time points as theory predicts. Our results may give some inspirations on simulating 1D transverse Ising model with superexchange interaction and exploring its dynamical quantum phase transition in experiment. △ Less

Submitted 12 April, 2020; v1 submitted 4 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. A 103, 043312 (2021)

Exciton interaction induced spin splitting in MoS$_2$ monolayer

Authors: Yao Li, G. Li, Xiaokun Zhai, Shi Fu Xiong, Hongjun Liu, Xiao Wang, Haitao Chen, Ying Gao, Xiu Zhang, Tong Liu, Yuan Ren, Xuekai Ma, Hongbin Fu, T. Gao

Abstract: By pum** nonresonantly a MoS$_2$ monolayer at $13$ K under a circularly polarized cw laser, we observe exciton energy redshifts that break the degeneracy between B excitons with opposite spin. The energy splitting increases monotonically with the laser power reaching as much as $18$ meV, while it diminishes with the temperature. The phenomenon can be explained theoretically by considering simult… ▽ More By pum** nonresonantly a MoS$_2$ monolayer at $13$ K under a circularly polarized cw laser, we observe exciton energy redshifts that break the degeneracy between B excitons with opposite spin. The energy splitting increases monotonically with the laser power reaching as much as $18$ meV, while it diminishes with the temperature. The phenomenon can be explained theoretically by considering simultaneously the bandgap renormalization which gives rise to the redshift and exciton-exciton Coulomb exchange interaction which is responsible for the spin-dependent splitting. Our results offer a simple scheme to control the valley degree of freedom in MoS$_2$ monolayer and provide an accessible method in investigating many-body exciton exciton interaction in such materials. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Spin and charge transport in topological nodal-line semimetals

Authors: Yao Zhou, Feng Xiong, Weipeng Chen, ** An

Abstract: We study transport properties of topological Weyl nodal-line semimetals(NLSs). Starting from a minimal lattice model with a single nodal loop, and by focusing on a normal-metal-NLS-normal-metal junction, we investigate the dependence of the novel transport behavior on the orientation of the nodal loop. When the loop is parallel to the junction interfaces, the transmitted current is found to be nea… ▽ More We study transport properties of topological Weyl nodal-line semimetals(NLSs). Starting from a minimal lattice model with a single nodal loop, and by focusing on a normal-metal-NLS-normal-metal junction, we investigate the dependence of the novel transport behavior on the orientation of the nodal loop. When the loop is parallel to the junction interfaces, the transmitted current is found to be nearly fully spin-polarized. Correspondingly, there exists a spin orientation, along which the incident electrons would be totally reflected. An unusual resonance of half transmission with the participation of surface states also occurs for a pair of incident electrons with opposite spin orientations. All these phenomena have been shown to originate from the existence of a single forward-propagating mode in the NLS of the junction, and argued to survive in more generic multi-band Weyl NLSs. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Comments: 12 pages, 11 figures

Journal ref: Phys. Rev. B 101, 075125 (2020)

Maximum Likelihood Decoding of Convolutionally Coded Noncoherent ASK Signals in AWGN Channels

Authors: Arafat Al-Dweik, Fuqin Xiong

Abstract: In this work we develop the maximum likelihood detection (MLD) algorithm for noncoherent amplitude shift keying (NCASK) systems in additive white Gaussian noise (AWGN) channels. The developed algorithm was used to investigate the performance of the NCASK system with convolutional coding and soft-decision Viterbi decoding. Tight and simple upper bounds have been derived to describe the system perfo… ▽ More In this work we develop the maximum likelihood detection (MLD) algorithm for noncoherent amplitude shift keying (NCASK) systems in additive white Gaussian noise (AWGN) channels. The developed algorithm was used to investigate the performance of the NCASK system with convolutional coding and soft-decision Viterbi decoding. Tight and simple upper bounds have been derived to describe the system performance; simulation results have shown that the derived upper bounds are within 0.1 dB of the simulated points. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Journal ref: Proceedings of the IASTED International Conference WIRELESS AND OPTICAL COMMUNICATIONS, June 2001, Banff, Canada,

Double Anchor R-CNN for Human Detection in a Crowd

Authors: Kevin Zhang, Feng Xiong, Peize Sun, Li Hu, Boxun Li, Gang Yu

Abstract: Detecting human in a crowd is a challenging problem due to the uncertainties of occlusion patterns. In this paper, we propose to handle the crowd occlusion problem in human detection by leveraging the head part. Double Anchor RPN is developed to capture body and head parts in pairs. A proposal crossover strategy is introduced to generate high-quality proposals for both parts as a training augmenta… ▽ More Detecting human in a crowd is a challenging problem due to the uncertainties of occlusion patterns. In this paper, we propose to handle the crowd occlusion problem in human detection by leveraging the head part. Double Anchor RPN is developed to capture body and head parts in pairs. A proposal crossover strategy is introduced to generate high-quality proposals for both parts as a training augmentation. Features of coupled proposals are then aggregated efficiently to exploit the inherent relationship. Finally, a Joint NMS module is developed for robust post-processing. The proposed framework, called Double Anchor R-CNN, is able to detect the body and head for each person simultaneously in crowded scenarios. State-of-the-art results are reported on challenging human detection datasets. Our model yields log-average miss rates (MR) of 51.79pp on CrowdHuman, 55.01pp on COCOPersons~(crowded sub-dataset) and 40.02pp on CrowdPose~(crowded sub-dataset), which outperforms previous baseline detectors by 3.57pp, 3.82pp, and 4.24pp, respectively. We hope our simple and effective approach will serve as a solid baseline and help ease future research in crowded human detection. △ Less

Submitted 22 September, 2019; originally announced September 2019.

The effect of Maxwellian fluid on wave propagation in porous media

Authors: Weitao Sun, Fansheng Xiong

Abstract: This study investigates the effect of a Maxwellian fluid on the propagation of waves in poroelastic media. Based on a fractional derivative stress-strain relation, a viscous dissipation function is obtained to measure the viscoelastic fluid-solid coupling effect. With the viscous dissipation function, elastic waves propagation is formulated in poroelastic media saturated by a fractional derivative… ▽ More This study investigates the effect of a Maxwellian fluid on the propagation of waves in poroelastic media. Based on a fractional derivative stress-strain relation, a viscous dissipation function is obtained to measure the viscoelastic fluid-solid coupling effect. With the viscous dissipation function, elastic waves propagation is formulated in poroelastic media saturated by a fractional derivative Maxwellian fluid, and the analytical expression of the P- and S-wave dispersion/attenuation is presented. Numerical examples show that the fractional derivative Maxwell strain-stress relation has a significant influence on wave velocities and causes the fluid-solid coupling transition from a dissipative regime to an elastic regime. In addition, the predicted fluid velocities are consistent with the laboratory observations of viscoelastic fluids under an oscillating pressure gradient. The results indicate that a viscous-elastic fluid effect may account for the velocity oscillation observed in laboratory. The method elucidates dynamical differences for viscous and viscoelastic fluid in porous medium, which may be of great importance to unconventional oil/gas exploration industry as well as theoretical researches. △ Less

Submitted 19 December, 2019; v1 submitted 27 August, 2019; originally announced August 2019.

Comments: 25 pages, 11 figures

A2J: Anchor-to-Joint Regression Network for 3D Articulated Pose Estimation from a Single Depth Image

Authors: Fu Xiong, Boshen Zhang, Yang Xiao, Zhiguo Cao, Taidong Yu, Joey Tianyi Zhou, Junsong Yuan

Abstract: For 3D hand and body pose estimation task in depth image, a novel anchor-based approach termed Anchor-to-Joint regression network (A2J) with the end-to-end learning ability is proposed. Within A2J, anchor points able to capture global-local spatial context information are densely set on depth image as local regressors for the joints. They contribute to predict the positions of the joints in ensemb… ▽ More For 3D hand and body pose estimation task in depth image, a novel anchor-based approach termed Anchor-to-Joint regression network (A2J) with the end-to-end learning ability is proposed. Within A2J, anchor points able to capture global-local spatial context information are densely set on depth image as local regressors for the joints. They contribute to predict the positions of the joints in ensemble way to enhance generalization ability. The proposed 3D articulated pose estimation paradigm is different from the state-of-the-art encoder-decoder based FCN, 3D CNN and point-set based manners. To discover informative anchor points towards certain joint, anchor proposal procedure is also proposed for A2J. Meanwhile 2D CNN (i.e., ResNet-50) is used as backbone network to drive A2J, without using time-consuming 3D convolutional or deconvolutional layers. The experiments on 3 hand datasets and 2 body datasets verify A2J's superiority. Meanwhile, A2J is of high running speed around 100 FPS on single NVIDIA 1080Ti GPU. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Comments: Accepted by ICCV2019

CO~($J=1-0$) Observations toward Filamentary Molecular Clouds in the Galactic Region with $l = [169\arcdeg.75, 174\arcdeg.75], b = [-0\arcdeg.75, 0\arcdeg.5]$

Authors: Fang Xiong, Xuepeng Chen, Qizhou Zhang, Ji Yang, Min Fang, Miaomiao Zhang, Weihua Guo, Li Sun

Abstract: We present observations of the CO isotopologues ($^{12}$CO, $^{13}$CO, and C$^{18}$O) toward the Galactic region with $169\arcdeg.75 \leqslant l \leqslant 174\arcdeg.75$ and $-0\arcdeg.75 \leqslant b \leqslant 0\arcdeg.5$, using the Purple Mountain Observatory 13.7~m millimeter-wavelength telescope. Based on the $^{13}$CO~($J = 1-0$) data, we find five molecular clouds within the velocity range be… ▽ More We present observations of the CO isotopologues ($^{12}$CO, $^{13}$CO, and C$^{18}$O) toward the Galactic region with $169\arcdeg.75 \leqslant l \leqslant 174\arcdeg.75$ and $-0\arcdeg.75 \leqslant b \leqslant 0\arcdeg.5$, using the Purple Mountain Observatory 13.7~m millimeter-wavelength telescope. Based on the $^{13}$CO~($J = 1-0$) data, we find five molecular clouds within the velocity range between $-$25 and 8~km~s$^{-1}$ that are all characterized by conspicuous filamentary structures. We have identified eight filaments with a length of 6.38--28.45~pc, a mean H$_2$ column density of 0.70$\times$10$^{21}$--6.53$\times$10$^{21}$~cm$^{-2}$, and a line mass of 20.24--161.91~$M_\sun$ pc$^{-1}$, assuming a distance of $\sim$1.7~kpc. Gaussian fittings to the inner parts of the radial density profiles lead to a mean FWHM width of 1.13$\pm$0.01~pc. The velocity structures of most filaments present continuous distributions with slight velocity gradients. We find that turbulence is the dominant internal pressure to support the fragmentation of filaments instead of thermal pressure. Most filaments have virial parameters smaller than 2; thus, they are gravitationally bound. Four filaments have an LTE line mass close to the virial line mass. We further extract dense clumps using the $^{13}$CO data and find that 64$\%$ of the clumps are associated with the filaments. According to the complementary IR data, most filaments have associated Class~II young stellar objects. Class~I objects are mainly found to be located in the filaments with a virial parameter close to 1. Within two virialized filaments, $^{12}$CO outflows have been detected, indicating ongoing star-forming activity therein. △ Less

Submitted 21 August, 2019; v1 submitted 16 July, 2019; originally announced July 2019.

Comments: 50 pages, 25 figures, 5 tables. Published by Astrophysical Journal

Comparison of Shear and Compression Jammed Packings of Frictional Disks

Authors: F. Xiong, P. Wang, A. H. Clark, T. Bertrand, N. T. Ouellette, M. D. Shattuck, C. S. O'Hern

Abstract: We compare the structural and mechanical properties of mechanically stable (MS) packings of frictional disks in two spatial dimensions (2D) generated with isotropic compression and simple shear protocols from discrete element modeling (DEM) simulations. We find that the average contact number and packing fraction at jamming onset are similar (with relative deviations $< 0.5\%$) for MS packings gen… ▽ More We compare the structural and mechanical properties of mechanically stable (MS) packings of frictional disks in two spatial dimensions (2D) generated with isotropic compression and simple shear protocols from discrete element modeling (DEM) simulations. We find that the average contact number and packing fraction at jamming onset are similar (with relative deviations $< 0.5\%$) for MS packings generated via compression and shear. In contrast, the average stress anisotropy $\langle {\hat Σ}_{xy} \rangle = 0$ for MS packings generated via isotropic compression, whereas $\langle {\hat Σ}_{xy} \rangle >0$ for MS packings generated via simple shear. To investigate the difference in the stress state of MS packings, we develop packing-generation protocols to first unjam the MS packings, remove the frictional contacts, and then rejam them. Using these protocols, we are able to obtain rejammed packings with nearly identical particle positions and stress anisotropy distributions compared to the original jammed packings. However, we find that when we directly compare the original jammed packings and rejammed ones, there are finite stress anisotropy deviations $Δ{\hat Σ}_{xy}$. The deviations are smaller than the stress anisotropy fluctuations obtained by enumerating the force solutions within the null space of the contact networks generated via the DEM simulations. These results emphasize that even though the compression and shear jamming protocols generate packings with the same contact networks, there can be residual differences in the normal and tangential forces at each contact, and thus differences in the stress anisotropy. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Comments: 11 pages, 11 figures

Journal ref: Granular Matter 21 (2019) 109

Quasi-ballistic thermal transport across MoS$_2$ thin films

Authors: Aditya Sood, Feng Xiong, Shunda Chen, Ramez Cheaito, Feifei Lian, Mehdi Asheghi, Yi Cui, Davide Donadio, Kenneth E. Goodson, Eric Pop

Abstract: Layered two-dimensional (2D) materials have highly anisotropic thermal properties between the in-plane and cross-plane directions. In general, it is thought that cross-plane thermal conductivities ($κ_z$) are low, and therefore c-axis phonon mean free paths (MFPs) are small. Here, we measure $κ_z$ across MoS$_2$ films of varying thickness (20 to 240 nm) and uncover evidence of very long c-axis pho… ▽ More Layered two-dimensional (2D) materials have highly anisotropic thermal properties between the in-plane and cross-plane directions. In general, it is thought that cross-plane thermal conductivities ($κ_z$) are low, and therefore c-axis phonon mean free paths (MFPs) are small. Here, we measure $κ_z$ across MoS$_2$ films of varying thickness (20 to 240 nm) and uncover evidence of very long c-axis phonon MFPs at room temperature in these layered semiconductors. Experimental data obtained using time-domain thermoreflectance (TDTR) are in good agreement with first-principles density functional theory (DFT). These calculations reveal that ~50% of the heat is carried by phonons with MFP >200 nm, exceeding kinetic theory estimates by nearly two orders of magnitude. Because of quasi-ballistic effects, the $κ_z$ of nanometer thin films of MoS$_2$ scales with their thickness and the volumetric thermal resistance asymptotes to a non-zero value, ~10 m$^{2}$KGW$^{-1}$. This contributes as much as 30% to the total thermal resistance of a 20 nm thick film, the rest being limited by thermal interface resistance with the SiO$_2$ substrate and top-side aluminum transducer. These findings are essential for understanding heat flow across nanometer-thin films of MoS$_2$ for optoelectronic and thermoelectric applications. △ Less

Submitted 7 March, 2019; v1 submitted 22 February, 2019; originally announced February 2019.

Journal ref: Nano Lett. 2019

An electrochemical thermal transistor

Authors: Aditya Sood, Feng Xiong, Shunda Chen, Haotian Wang, Daniele Selli, **song Zhang, Connor J. McClellan, Jie Sun, Davide Donadio, Yi Cui, Eric Pop, Kenneth E. Goodson

Abstract: The ability to actively regulate heat flow at the nanoscale could be a game changer for applications in thermal management and energy harvesting. Such a breakthrough could also enable the control of heat flow using thermal circuits, in a manner analogous to electronic circuits. Here we demonstrate switchable thermal transistors with an order of magnitude thermal on/off ratio, based on reversible e… ▽ More The ability to actively regulate heat flow at the nanoscale could be a game changer for applications in thermal management and energy harvesting. Such a breakthrough could also enable the control of heat flow using thermal circuits, in a manner analogous to electronic circuits. Here we demonstrate switchable thermal transistors with an order of magnitude thermal on/off ratio, based on reversible electrochemical lithium intercalation in MoS2 thin films. We use spatially-resolved time-domain thermoreflectance to map the lithium ion distribution during device operation, and atomic force microscopy to show that the lithiated state correlates with increased thickness and surface roughness. First principles calculations reveal that the thermal conductance modulation is due to phonon scattering by lithium rattler modes, c-axis strain, and stacking disorder. This study lays the foundation for electrochemically-driven nanoscale thermal regulators, and establishes thermal metrology as a useful probe of spatio-temporal intercalant dynamics in nanomaterials. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Journal ref: Nature Communicationsvolume 9, Article number: 4510 (2018)

Material Based Object Tracking in Hyperspectral Videos: Benchmark and Algorithms

Authors: Fengchao Xiong, Jun Zhou, Yuntao Qian

Abstract: Traditional color images only depict color intensities in red, green and blue channels, often making object trackers fail in challenging scenarios, e.g., background clutter and rapid changes of target appearance. Alternatively, material information of targets contained in a large amount of bands of hyperspectral images (HSI) is more robust to these difficult conditions. In this paper, we conduct a… ▽ More Traditional color images only depict color intensities in red, green and blue channels, often making object trackers fail in challenging scenarios, e.g., background clutter and rapid changes of target appearance. Alternatively, material information of targets contained in a large amount of bands of hyperspectral images (HSI) is more robust to these difficult conditions. In this paper, we conduct a comprehensive study on how material information can be utilized to boost object tracking from three aspects: benchmark dataset, material feature representation and material based tracking. In terms of benchmark, we construct a dataset of fully-annotated videos, which contain both hyperspectral and color sequences of the same scene. Material information is represented by spectral-spatial histogram of multidimensional gradient, which describes the 3D local spectral-spatial structure in an HSI, and fractional abundances of constituted material components which encode the underlying material distribution. These two types of features are embedded into correlation filters, yielding material based tracking. Experimental results on the collected benchmark dataset show the potentials and advantages of material based object tracking. △ Less

Submitted 10 July, 2019; v1 submitted 10 December, 2018; originally announced December 2018.

Comments: Update results

Thermal Transport Across Graphene Step Junctions

Authors: Miguel Munoz Rojo, Zuanyi Li, Charles Sievers, Alex C. Bornstein, Eilam Yalon, Sanchit Deshmukh, Sam Vaziri, Myung-Ho Bae, Feng Xiong, Davide Donadio, Eric Pop

Abstract: Step junctions are often present in layered materials, i.e. where single-layer regions meet multi-layer regions, yet their effect on thermal transport is not understood to date. Here, we measure heat flow across graphene junctions (GJs) from monolayer to bilayer graphene, as well as bilayer to four-layer graphene for the first time, in both heat flow directions. The thermal conductance of the mono… ▽ More Step junctions are often present in layered materials, i.e. where single-layer regions meet multi-layer regions, yet their effect on thermal transport is not understood to date. Here, we measure heat flow across graphene junctions (GJs) from monolayer to bilayer graphene, as well as bilayer to four-layer graphene for the first time, in both heat flow directions. The thermal conductance of the monolayer-bilayer GJ device ranges from ~0.5 to 9.1x10^8 Wm-2K-1 between 50 K to 300 K. Atomistic simulations of such GJ device reveal that graphene layers are relatively decoupled, and the low thermal conductance of the device is determined by the resistance between the two dis-tinct graphene layers. In these conditions the junction plays a negligible effect. To prove that the decoupling between layers controls thermal transport in the junction, the heat flow in both directions was measured, showing no evidence of thermal asymmetry or rectification (within experimental error bars). For large-area graphene applications, this signifies that small bilayer (or multilayer) islands have little or no contribution to overall thermal transport. △ Less

Submitted 30 November, 2018; originally announced November 2018.

Journal ref: 2D Materials, 6, 011005 (2019)

Object Tracking in Hyperspectral Videos with Convolutional Features and Kernelized Correlation Filter

Authors: Kun Qian, Jun Zhou, Fengchao Xiong, Huixin Zhou, Juan Du

Abstract: Target tracking in hyperspectral videos is a new research topic. In this paper, a novel method based on convolutional network and Kernelized Correlation Filter (KCF) framework is presented for tracking objects of interest in hyperspectral videos. We extract a set of normalized three-dimensional cubes from the target region as fixed convolution filters which contain spectral information surrounding… ▽ More Target tracking in hyperspectral videos is a new research topic. In this paper, a novel method based on convolutional network and Kernelized Correlation Filter (KCF) framework is presented for tracking objects of interest in hyperspectral videos. We extract a set of normalized three-dimensional cubes from the target region as fixed convolution filters which contain spectral information surrounding a target. The feature maps generated by convolutional operations are combined to form a three-dimensional representation of an object, thereby providing effective encoding of local spectral-spatial information. We show that a simple two-layer convolutional networks is sufficient to learn robust representations without the need of offline training with a large dataset. In the tracking step, KCF is adopted to distinguish targets from neighboring environment. Experimental results demonstrate that the proposed method performs well on sample hyperspectral videos, and outperforms several state-of-the-art methods tested on grayscale and color videos in the same scene. △ Less

Submitted 28 October, 2018; originally announced October 2018.

Comments: Accepted by ICSM 2018

All-optical production of ${}^6\textrm{Li}$ molecular BEC in excited hyperfine levels

Authors: Yun Long, Feng Xiong, Vinod Gaire, Cameron Galigan, Colin V. Parker

Abstract: We present an all-optical method for achieving molecular Bose-Einstein condensates of ${}^6\textrm{Li}$. We demonstrate this with mixtures in the lowest two (1-2), and second lowest two (2-3) hyperfine states. For the 1-2 mixture, we can achieve condensate fractions of 36\%, with $9\times10^4$ atoms at $0.05\textrm{ }μ\textrm{K}$ temperature. For the 2-3 mixture, we have 28\% condensed with… ▽ More We present an all-optical method for achieving molecular Bose-Einstein condensates of ${}^6\textrm{Li}$. We demonstrate this with mixtures in the lowest two (1-2), and second lowest two (2-3) hyperfine states. For the 1-2 mixture, we can achieve condensate fractions of 36\%, with $9\times10^4$ atoms at $0.05\textrm{ }μ\textrm{K}$ temperature. For the 2-3 mixture, we have 28\% condensed with $3.2\times10^4$ atoms at $0.05\textrm{ }μ\textrm{K}$ temperature. We use mostly standard methods, but make a number of refinements in the magnetic bias coils compared with earlier work. Our method imposes minimal constraints on subsequent experiments by allowing plenty of optical access while requiring only one high-vacuum chamber. We use an optical system designed around minimizing the number of active elements, and we can accomplish slowing and sub-Doppler cooling with a single tapered amplifier △ Less

Submitted 17 September, 2018; originally announced September 2018.

Journal ref: Phys. Rev. A 98, 043626 (2018)

Predicting Learning Status in MOOCs using LSTM

Authors: Zhemin Liu, Feng Xiong, Kaifa Zou, Hongzhi Wang

Abstract: Real-time and open online course resources of MOOCs have attracted a large number of learners in recent years. However, many new questions were emerging about the high dropout rate of learners. For MOOCs platform, predicting the learning status of MOOCs learners in real time with high accuracy is the crucial task, and it also help improve the quality of MOOCs teaching. The prediction task in this… ▽ More Real-time and open online course resources of MOOCs have attracted a large number of learners in recent years. However, many new questions were emerging about the high dropout rate of learners. For MOOCs platform, predicting the learning status of MOOCs learners in real time with high accuracy is the crucial task, and it also help improve the quality of MOOCs teaching. The prediction task in this paper is inherently a time series prediction problem, and can be treated as time series classification problem, hence this paper proposed a prediction model based on RNNLSTMs and optimization techniques which can be used to predict learners' learning status. Using datasets provided by Chinese University MOOCs as the inputs of model, the average accuracy of model's outputs was about 90%. △ Less

Submitted 5 August, 2018; originally announced August 2018.

Comments: arXiv admin note: text overlap with arXiv:1402.1128 by other authors

Towards Good Practices on Building Effective CNN Baseline Model for Person Re-identification

Authors: Fu Xiong, Yang Xiao, Zhiguo Cao, Kaicheng Gong, Zhiwen Fang, Joey Tianyi Zhou

Abstract: Person re-identification is indeed a challenging visual recognition task due to the critical issues of human pose variation, human body occlusion, camera view variation, etc. To address this, most of the state-of-the-art approaches are proposed based on deep convolutional neural network (CNN), being leveraged by its strong feature learning power and classification boundary fitting capacity. Althou… ▽ More Person re-identification is indeed a challenging visual recognition task due to the critical issues of human pose variation, human body occlusion, camera view variation, etc. To address this, most of the state-of-the-art approaches are proposed based on deep convolutional neural network (CNN), being leveraged by its strong feature learning power and classification boundary fitting capacity. Although the vital role towards person re-identification, how to build effective CNN baseline model has not been well studied yet. To answer this open question, we propose 3 good practices in this paper from the perspectives of adjusting CNN architecture and training procedure. In particular, they are adding batch normalization after the global pooling layer, executing identity categorization directly using only one fully-connected, and using Adam as optimizer. The extensive experiments on 3 widely-used benchmark datasets demonstrate that, our propositions essentially facilitate the CNN baseline model to achieve the state-of-the-art performance without any other high-level domain knowledge or low-level technical trick. △ Less

Submitted 29 July, 2018; originally announced July 2018.

Divisibility hierarchy of open quantum systems

Authors: Fei-Lei Xiong, Zeng-Bing Chen

Abstract: In the theory of open quantum systems, divisibility of the system dynamical maps is related to memory effects in the dynamics. By decomposing the system Hilbert space as a direct sum of several Hilbert spaces, we study the relationship among the corresponding dynamical maps. It is shown that if the dynamical maps of the open system possess a chain of invariant subspaces, there exists a divisibilit… ▽ More In the theory of open quantum systems, divisibility of the system dynamical maps is related to memory effects in the dynamics. By decomposing the system Hilbert space as a direct sum of several Hilbert spaces, we study the relationship among the corresponding dynamical maps. It is shown that if the dynamical maps of the open system possess a chain of invariant subspaces, there exists a divisibility hierarchy for their corresponding dynamics. Two classes of examples are given for illustrating these hierarchical structures. One is the pure-dephasing dynamics, and the other is the decay dynamics. Our results offer a systematic approach to obtaining the divisibility conditions and non-Markovian witnesses for these dynamics. Moreover, as a new way of decomposing open quantum systems, it is worthy of further study. △ Less

Submitted 29 May, 2018; originally announced May 2018.

Comments: 8 pages

MoNet: Moments Embedding Network

Authors: Mengran Gou, Fei Xiong, Octavia Camps, Mario Sznaier

Abstract: Bilinear pooling has been recently proposed as a feature encoding layer, which can be used after the convolutional layers of a deep network, to improve performance in multiple vision tasks. Different from conventional global average pooling or fully connected layer, bilinear pooling gathers 2nd order information in a translation invariant fashion. However, a serious drawback of this family of pool… ▽ More Bilinear pooling has been recently proposed as a feature encoding layer, which can be used after the convolutional layers of a deep network, to improve performance in multiple vision tasks. Different from conventional global average pooling or fully connected layer, bilinear pooling gathers 2nd order information in a translation invariant fashion. However, a serious drawback of this family of pooling layers is their dimensionality explosion. Approximate pooling methods with compact properties have been explored towards resolving this weakness. Additionally, recent results have shown that significant performance gains can be achieved by adding 1st order information and applying matrix normalization to regularize unstable higher order information. However, combining compact pooling with matrix normalization and other order information has not been explored until now. In this paper, we unify bilinear pooling and the global Gaussian embedding layers through the empirical moment matrix. In addition, we propose a novel sub-matrix square-root layer, which can be used to normalize the output of the convolution layer directly and mitigate the dimensionality problem with off-the-shelf compact pooling methods. Our experiments on three widely used fine-grained classification datasets illustrate that our proposed architecture, MoNet, can achieve similar or better performance than with the state-of-art G2DeNet. Furthermore, when combined with compact pooling technique, MoNet obtains comparable performance with encoded features with 96% less dimensions. △ Less

Submitted 29 March, 2018; v1 submitted 20 February, 2018; originally announced February 2018.

Comments: Accepted in CVPR 2018

Boson-boson pure-dephasing model with non-Markovian properties

Authors: Fei-Lei Xiong, Li Li, Zeng-Bing Chen

Abstract: Understanding decoherence processes is crucial in the study of open quantum systems. In this paper, we discuss the mechanism of pure-dephasing process with a newly proposed boson-boson model, namely, a bosonic field coupled to another bosonic bath in thermal equilibrium. Our model is fully solvable and can reproduce the pure-dephasing process which is usually described by the well-known spin-boson… ▽ More Understanding decoherence processes is crucial in the study of open quantum systems. In this paper, we discuss the mechanism of pure-dephasing process with a newly proposed boson-boson model, namely, a bosonic field coupled to another bosonic bath in thermal equilibrium. Our model is fully solvable and can reproduce the pure-dephasing process which is usually described by the well-known spin-boson model, therefore offering a new perspective to understanding decoherence processes in open quantum systems of high dimension. We also show that this model admits a generically non-Markovian dynamics with respect to various different non-Markovian measures. △ Less

Submitted 10 February, 2018; originally announced February 2018.

Comments: 8 pages, 8 figures

Hopf-link multi-Weyl-loop topological semimetals

Authors: Yao Zhou, Feng Xiong, Xiangang Wan, ** An

Abstract: We construct a generic two-band model which can describe topological Weyl semimetals with multiple closed Weyl loops. All the existing multi-Weyl-loop semimetals including the nodal-net, or nodal-chain and Hopf-link states can be examined within one same framework. Based on a two-loop model, the corresponding drum-head surface states for these topologically different bulk states are studied and co… ▽ More We construct a generic two-band model which can describe topological Weyl semimetals with multiple closed Weyl loops. All the existing multi-Weyl-loop semimetals including the nodal-net, or nodal-chain and Hopf-link states can be examined within one same framework. Based on a two-loop model, the corresponding drum-head surface states for these topologically different bulk states are studied and compared with each other. The connection of our model with Hopf insulators is also discussed. Furthermore, to identify experimentally these topologically different Weyl semimetal states, especially distinguish the Hopf-link from unlinked ones, we also investigate their Landau levels. It is found that the Hopf-link state can be characterized by the existence of a quadruply degenerate zero-energy Landau band, regardless of the direction of the magnetic field. △ Less

Submitted 12 January, 2018; originally announced January 2018.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. B 97, 155140 (2018)

Temperature Dependent Thermal Boundary Conductance of Monolayer MoS$_2$ by Raman Thermometry

Authors: Eilam Yalon, Özgür Burak Aslan, Kirby K. H. Smithe, Connor J. McClellan, Saurabh V. Suryavanshi, Feng Xiong, Aditya Sood, Christopher M. Neumann, Xiaoqing Xu, Kenneth E. Goodson, Tony F. Heinz, Eric Pop

Abstract: The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS$_2$ with AlN and SiO$_2$, using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in suc… ▽ More The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS$_2$ with AlN and SiO$_2$, using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in such experiments, which we characterize here for the first time above room temperature. We obtain TBC ~ 15 MWm$^-$$^2$K$^-$$^1$ near room temperature, increasing as ~ T$^0$$^.$$^6$$^5$ in the range 300 - 600 K. The similar TBC of MoS$_2$ with the two substrates indicates that MoS$_2$ is the "softer" material with weaker phonon irradiance, and the relatively low TBC signifies that such interfaces present a key bottleneck in energy dissipation from 2D devices. Our approach is needed to correctly perform Raman thermometry of 2D materials, and our findings are key for understanding energy coupling at the nanoscale. △ Less

Submitted 8 February, 2020; v1 submitted 20 October, 2017; originally announced October 2017.

Journal ref: ACS Applied Materials & Interfaces (2017)

Spatiotemporal Modeling for Crowd Counting in Videos

Authors: Feng Xiong, Xingjian Shi, Dit-Yan Yeung

Abstract: Region of Interest (ROI) crowd counting can be formulated as a regression problem of learning a map** from an image or a video frame to a crowd density map. Recently, convolutional neural network (CNN) models have achieved promising results for crowd counting. However, even when dealing with video data, CNN-based methods still consider each video frame independently, ignoring the strong temporal… ▽ More Region of Interest (ROI) crowd counting can be formulated as a regression problem of learning a map** from an image or a video frame to a crowd density map. Recently, convolutional neural network (CNN) models have achieved promising results for crowd counting. However, even when dealing with video data, CNN-based methods still consider each video frame independently, ignoring the strong temporal correlation between neighboring frames. To exploit the otherwise very useful temporal information in video sequences, we propose a variant of a recent deep learning model called convolutional LSTM (ConvLSTM) for crowd counting. Unlike the previous CNN-based methods, our method fully captures both spatial and temporal dependencies. Furthermore, we extend the ConvLSTM model to a bidirectional ConvLSTM model which can access long-range information in both directions. Extensive experiments using four publicly available datasets demonstrate the reliability of our approach and the effectiveness of incorporating temporal information to boost the accuracy of crowd counting. In addition, we also conduct some transfer learning experiments to show that once our model is trained on one dataset, its learning experience can be transferred easily to a new dataset which consists of only very few video frames for model adaptation. △ Less

Submitted 25 July, 2017; originally announced July 2017.

Comments: Accepted by ICCV 2017

Spatially Resolved Thermometry of Resistive Memory Devices

Authors: Eilam Yalon, Sanchit Deshmukh, Miguel Muñoz Rojo, Feifei Lian, Christopher M. Neumann, Feng Xiong, Eric Pop

Abstract: The operation of resistive and phase-change memory (RRAM and PCM) is controlled by highly localized self-heating effects, yet detailed studies of their temperature are rare due to challenges of nanoscale thermometry. Here we show that the combination of Raman thermometry and scanning thermal microscopy (SThM) can enable such measurements with high spatial resolution. We report temperature-dependen… ▽ More The operation of resistive and phase-change memory (RRAM and PCM) is controlled by highly localized self-heating effects, yet detailed studies of their temperature are rare due to challenges of nanoscale thermometry. Here we show that the combination of Raman thermometry and scanning thermal microscopy (SThM) can enable such measurements with high spatial resolution. We report temperature-dependent Raman spectra of HfO$_2$, TiO$_2$ and Ge$_2$Sb$_2$Te$_5$ (GST) films, and demonstrate direct measurements of temperature profiles in lateral PCM devices. Our measurements reveal that electrical and thermal interfaces dominate the operation of such devices, uncovering a thermal boundary resistance of 30 m$^2$K$^{-1}$GW$^{-1}$ at GST-SiO$_2$ interfaces and an effective thermopower 350 $μ$V/K at GST-Pt interfaces. We also discuss possible pathways to apply Raman thermometry and SThM techniques to nanoscale and vertical resistive memory devices. △ Less

Submitted 7 June, 2017; originally announced June 2017.

Theory-Independent Measure of Coherence

Authors: Liang-Liang Sun, Fei-Lei Xiong, Sixia Yu, Zeng-Bing Chen

Abstract: We provide a theory independent framework to quantify coherence. In comparison with Bell's theory independent approach to quantum nonlocality, we characterize a general coherence phenomenon with statistics arising from sequential measurements of observables that might not be compatible. By introducing a "decohered" state after the sharp measurement of some preferred observable, we quantify coheren… ▽ More We provide a theory independent framework to quantify coherence. In comparison with Bell's theory independent approach to quantum nonlocality, we characterize a general coherence phenomenon with statistics arising from sequential measurements of observables that might not be compatible. By introducing a "decohered" state after the sharp measurement of some preferred observable, we quantify coherence by either the difference of initial "superposed" state from the "decohered" state or the measurement outcome deviations when they subjected to further measurements. Applied to quantum mechanics, the outcome-difference measures yield two novel quantum coherence measures, one of which upper-bounds quantum interference visibility. In the Bell's scenario, we find a finite gap of coherences between a super non-local model and quantum mechanic and therefore our framework can help to single out quantum mechanics beyond non-locality. △ Less

Submitted 31 January, 2018; v1 submitted 2 May, 2017; originally announced May 2017.

Energy Dissipation in Monolayer MoS$_2$ Electronics

Authors: Eilam Yalon, Connor J. McClellan, Kirby K. H. Smithe, Miguel Muñoz Rojo, Runjie, Xu, Saurabh V. Suryavanshi, Alex J. Gabourie, Christopher M. Neumann, Feng Xiong, Amir B. Farimani, Eric Pop

Abstract: The advancement of nanoscale electronics has been limited by energy dissipation challenges for over a decade. Such limitations could be particularly severe for two-dimensional (2D) semiconductors integrated with flexible substrates or multi-layered processors, both being critical thermal bottlenecks. To shed light into fundamental aspects of this problem, here we report the first direct measuremen… ▽ More The advancement of nanoscale electronics has been limited by energy dissipation challenges for over a decade. Such limitations could be particularly severe for two-dimensional (2D) semiconductors integrated with flexible substrates or multi-layered processors, both being critical thermal bottlenecks. To shed light into fundamental aspects of this problem, here we report the first direct measurement of spatially resolved temperature in functioning 2D monolayer MoS$_2$ transistors. Using Raman thermometry we simultaneously obtain temperature maps of the device channel and its substrate. This differential measurement reveals the thermal boundary conductance (TBC) of the MoS$_2$ interface (14 $\pm$ 4 MWm$^-$$^2$K$^-$$^1$) is an order magnitude larger than previously thought, yet near the low end of known solid-solid interfaces. Our study also reveals unexpected insight into non-uniformities of the MoS$_2$ transistors (small bilayer regions), which do not cause significant self-heating, suggesting that such semiconductors are less sensitive to inhomogeneity than expected. These results provide key insights into energy dissipation of 2D semiconductors and pave the way for the future design of energy-efficient 2D electronics. △ Less

Submitted 26 April, 2017; originally announced April 2017.

Journal ref: Nano Letters (2017)

CO~($J = 1-0$) Observations of a Filamentary Molecular Cloud in the Galactic Region Centered at $l = 150\arcdeg, b = 3.5\arcdeg$

Authors: Fang Xiong, Xuepeng Chen, Ji Yang, Min Fang, Shaobo Zhang, Miaomiao Zhang, Xinyu Du, Wenshan Long

Abstract: We present large-field (4.25~$\times$~3.75 deg$^2$) map** observations toward the Galactic region centered at $l = 150\arcdeg, b = 3.5\arcdeg$ in the $J = 1-0$ emission line of CO isotopologues ($^{12}$CO, $^{13}$CO, and C$^{18}$O), using the 13.7 m millimeter-wavelength telescope of the Purple Mountain Observatory. Based on the $^{13}$CO observations, we reveal a filamentary cloud in the Local… ▽ More We present large-field (4.25~$\times$~3.75 deg$^2$) map** observations toward the Galactic region centered at $l = 150\arcdeg, b = 3.5\arcdeg$ in the $J = 1-0$ emission line of CO isotopologues ($^{12}$CO, $^{13}$CO, and C$^{18}$O), using the 13.7 m millimeter-wavelength telescope of the Purple Mountain Observatory. Based on the $^{13}$CO observations, we reveal a filamentary cloud in the Local Arm at a velocity range of $-$0.5 to 6.5~km~s$^{-1}$. This molecular cloud contains 1 main filament and 11 sub-filaments, showing the so-called "ridge-nest" structure. The main filament and three sub-filaments are also detected in the C$^{18}$O line. The velocity structures of most identified filaments display continuous distribution with slight velocity gradients. The measured median excitation temperature, line width, length, width, and linear mass of the filaments are $\sim$9.28~K, 0.85~km~s$^{-1}$, 7.30~pc, 0.79~pc, and 17.92~$M_\sun$~pc$^{-1}$, respectively, assuming a distance of 400~pc. We find that the four filaments detected in the C$^{18}$O line are thermally supercritical, and two of them are in the virialized state, and thus tend to be gravitationally bound. We identify in total 146 $^{13}$CO clumps in the cloud, about 77$\%$ of the clumps are distributed along the filaments. About 56$\%$ of the virialized clumps are found to be associated with the supercritical filaments. Three young stellar object (YSO) candidates are also identified in the supercritical filaments, based on the complementary infrared (IR) data. These results indicate that the supercritical filaments, especially the virialized filaments, may contain star-forming activities. △ Less

Submitted 23 March, 2017; v1 submitted 3 March, 2017; originally announced March 2017.

Comments: 48 pages, 24 figures, 3 tables. Published by Astrophysical Journal

Energy Trading between microgrids Individual Cost Minimization and Social Welfare Maximization

Authors: Zhenyu Qiao, Bo Yang, Qimin Xu, Fei Xiong, Cailian Chen, ** Guan, Bei Chen

Abstract: High penetration of renewable energy source makes microgrid (MGs) be environment friendly. However, the stochastic input from renewable energy resource brings difficulty in balancing the energy supply and demand. Purchasing extra energy from macrogrid to deal with energy shortage will increase MG energy cost. To mitigate intermittent nature of renewable energy, energy trading and energy storage wh… ▽ More High penetration of renewable energy source makes microgrid (MGs) be environment friendly. However, the stochastic input from renewable energy resource brings difficulty in balancing the energy supply and demand. Purchasing extra energy from macrogrid to deal with energy shortage will increase MG energy cost. To mitigate intermittent nature of renewable energy, energy trading and energy storage which can exploit diversity of renewable energy generation across space and time are efficient and cost-effective methods. But current energy storage control action will impact the future control action which brings challenge to energy management. In addition, due to MG participating energy trading as prosumer, it calls for an efficient trading mechanism. Therefore, this paper focuses on the problem of MG energy management and trading. Energy trading problem is formulated as a stochastic optimization one with both individual profit and social welfare maximization. Firstly a Lyapunov optimization based algorithm is developed to solve the stochastic problem. Secondly the double-auction based mechanism is provided to attract MG truthful bidding for buying and selling energy. Through theoretical analysis, we demonstrate that individual MG can achieve a time average energy cost close to offline optimum with tradeoff between storage capacity and energy trading cost. Meanwhile the social welfare is also asymptotically maximized under double auction. Simulation results based on real world data show the effectiveness of our algorithm. △ Less

Submitted 20 March, 2017; v1 submitted 9 February, 2017; originally announced February 2017.

Qudit hypergraph states and their properties

Authors: Fei-Lei Xiong, Yi-Zheng Zhen, Wen-Fei Cao, Kai Chen, Zeng-Bing Chen

Abstract: Hypergraph states, a generalization of graph states, constitute a large class of quantum states with intriguing non-local properties and have promising applications in quantum information science and technology. In this paper, we generalize hypergraph states to qudit hypergraph states, i.e., each vertex in the generalized hypergraph (multi-hypergraph) represents a $d$-level quantum system instead… ▽ More Hypergraph states, a generalization of graph states, constitute a large class of quantum states with intriguing non-local properties and have promising applications in quantum information science and technology. In this paper, we generalize hypergraph states to qudit hypergraph states, i.e., each vertex in the generalized hypergraph (multi-hypergraph) represents a $d$-level quantum system instead of a qubit. It is shown that multi-hypergraphs and $d$-level hypergraph states have a one-to-one correspondence. We prove that if one part of a multi-hypergraph is connected with the other part, the corresponding subsystems are entangled. More generally, the structure of a multi-hypergraph reveals the entanglement property of the corresponding quantum state. Furthermore, we discuss their relationship with some well-known state classes, e.g., real equally weighted states and stabilizer states. These states' responses to the generalized $Z$ ($X$) operations and $Z$ ($X$) measurements are studied. The Bell non-locality, an important resource in fulfilling many quantum information tasks, is also investigated. △ Less

Submitted 28 September, 2017; v1 submitted 26 January, 2017; originally announced January 2017.

Comments: 12 pages, 5 figures

Journal ref: Phys. Rev. A 97, 012323 (2018)

Large-field CO(1--0) observations toward the Galactic historical supernova remnants: a large cavity around Tycho's supernova remnant

Authors: Xuepeng Chen, Fang Xiong, Ji Yang

Abstract: The investigation of the interaction between the supernova remnants (SNRs) and interstellar gas is not only necessary to improve our knowledge of SNRs, but also to understand the nature of the progenitor systems. As a part of the Milky Way Imaging Scroll Painting CO line survey (MWISP), we study the interstellar gas surrounding the Galactic historical SNRs, using the PMO 13.7-meter telescope. In t… ▽ More The investigation of the interaction between the supernova remnants (SNRs) and interstellar gas is not only necessary to improve our knowledge of SNRs, but also to understand the nature of the progenitor systems. As a part of the Milky Way Imaging Scroll Painting CO line survey (MWISP), we study the interstellar gas surrounding the Galactic historical SNRs, using the PMO 13.7-meter telescope. In this work, we present large-field (3$^\circ$$\times$2$^\circ$) and high-sensitivity CO(1-0) molecular line observations toward Tycho's SNR. The CO observations reveal, from the outside in, large molecular clouds, stream-like structures, and an inner rim around Tycho's SNR. We derived the basic properties (column density, mass, and kinematics) of these objects based on the CO observations. The large molecular clouds individually show an arc toward the remnant center, outlining a large cavity with radii of $\sim$0.3$^\circ$$\times$0.6$^\circ$ (or 13 pc $\times$27 pc at a distance of 2.5 kpc) around the remnant. The CO line broadenings and asymmetries detected in the surrounding clouds, the observed expansion of the cavity, in concert with enhanced $^{12}$CO(2-1)/(1-0) intensity ratio detected in previous studies, suggest the interaction of the large cavity with a wind in the region. After excluding the scenario of a large bubble produced by bright massive stars, we suggest that the large cavity could be explained by accretion wind from the progenitor system of Tycho's supernova. Nevertheless, the possibility of the random distribution of a large cavity around Tycho's SNR cannot be ruled out thus far. Further observations are needed to confirm the physical association of the large cavity with Tycho's SNR. △ Less

Submitted 18 June, 2017; v1 submitted 18 August, 2016; originally announced August 2016.

Comments: 15 pages, 9 figures, updated according to the A&A proof

Journal ref: A&A 604, A13 (2017)

SANTA: Self-Aligned Nanotrench Ablation via Joule Heating for Probing Sub-20 nm Devices

Authors: Feng Xiong, Sanchit Deshmukh, Sungduk Hong, Yuan Dai, Ashkan Behnam, Feifei Lian, Eric Pop

Abstract: Manipulating materials at the nanometer scale is challenging, particularly if alignment with nanoscale electrodes is desired. Here we describe a lithography-free, self-aligned nanotrench ablation (SANTA) technique to create nanoscale trenches in a polymer like poly(methyl) methacrylate (PMMA). The nanotrenches are self-aligned with carbon nanotube (CNT) and graphene ribbon electrodes through a sim… ▽ More Manipulating materials at the nanometer scale is challenging, particularly if alignment with nanoscale electrodes is desired. Here we describe a lithography-free, self-aligned nanotrench ablation (SANTA) technique to create nanoscale trenches in a polymer like poly(methyl) methacrylate (PMMA). The nanotrenches are self-aligned with carbon nanotube (CNT) and graphene ribbon electrodes through a simple Joule heating process. Using simulations and experiments we investigate how the Joule power, ambient temperature, PMMA thickness, and substrate properties can improve the spatial resolution of this technique. We achieve sub-20 nm nanotrenches for the first time, by lowering the ambient temperature and reducing the PMMA thickness. We also demonstrate a functioning nanoscale resistive memory (RRAM) bit self-aligned with a CNT control device, achieved through the SANTA approach. This technique provides an elegant and inexpensive method to probe nanoscale devices using self-aligned electrodes, without the use of conventional alignment or lithography steps. △ Less

Submitted 16 June, 2016; originally announced June 2016.

Comments: 18 pages, 5 figures in the manuscript

Test of the universality of free fall with atoms in different spin orientations

Authors: Xiao-Chun Duan, Xiao-Bing Deng, Min-Kang Zhou, Ke Zhang, Wen-Jie Xu, Feng Xiong, Yao-Yao Xu, Cheng-Gang Shao, Jun Luo, Zhong-Kun Hu

Abstract: We report a test of the universality of free fall (UFF) by comparing the gravity acceleration of the $^{87}$Rb atoms in $m_F=+1$ versus that in $m_F=-1$, where the corresponding spin orientations are opposite. A Mach-Zehnder-type atom interferometer is exploited to sequentially measure the free fall acceleration of the atoms in these two magnetic sublevels, and the resultant E$\rm{\ddot{o}}$tv… ▽ More We report a test of the universality of free fall (UFF) by comparing the gravity acceleration of the $^{87}$Rb atoms in $m_F=+1$ versus that in $m_F=-1$, where the corresponding spin orientations are opposite. A Mach-Zehnder-type atom interferometer is exploited to sequentially measure the free fall acceleration of the atoms in these two magnetic sublevels, and the resultant E$\rm{\ddot{o}}$tv$\rm{\ddot{o}}$s ratio is ${η_S} =(0.2\pm1.2)\times 10^{-7}$. This also gives an upper limit of $1.1\times 10^{-21}$ GeV/m for possible gradient field of the spacetime torsion. The interferometer using atoms in $m_F=\pm 1$ is highly sensitive to the magnetic field inhomogeneity, and a double differential measurement method is developed to alleviate the inhomogeneity influence. Moreover, a proof experiment by modulating the magnetic field is performed, which validates the alleviation of the inhomogeneity influence in our test. △ Less

Submitted 20 February, 2016; originally announced February 2016.

Comments: 12 pages, 2 figures. arXiv admin note: substantial text overlap with arXiv:1503.00433

Joint Estimation of Reverberation Time and Direct-to-Reverberation Ratio from Speech using Auditory-Inspired Features

Authors: Feifei Xiong, Stefan Goetze, Bernd T. Meyer

Abstract: Blind estimation of acoustic room parameters such as the reverberation time $T_\mathrm{60}$ and the direct-to-reverberation ratio ($\mathrm{DRR}$) is still a challenging task, especially in case of blind estimation from reverberant speech signals. In this work, a novel approach is proposed for joint estimation of $T_\mathrm{60}$ and $\mathrm{DRR}$ from wideband speech in noisy conditions. 2D Gabor… ▽ More Blind estimation of acoustic room parameters such as the reverberation time $T_\mathrm{60}$ and the direct-to-reverberation ratio ($\mathrm{DRR}$) is still a challenging task, especially in case of blind estimation from reverberant speech signals. In this work, a novel approach is proposed for joint estimation of $T_\mathrm{60}$ and $\mathrm{DRR}$ from wideband speech in noisy conditions. 2D Gabor filters arranged in a filterbank are exploited for extracting features, which are then used as input to a multi-layer perceptron (MLP). The MLP output neurons correspond to specific pairs of $(T_\mathrm{60}, \mathrm{DRR})$ estimates; the output is integrated over time, and a simple decision rule results in our estimate. The approach is applied to single-microphone fullband speech signals provided by the Acoustic Characterization of Environments (ACE) Challenge. Our approach outperforms the baseline systems with median errors of close-to-zero and -1.5 dB for the $T_\mathrm{60}$ and $\mathrm{DRR}$ estimates, respectively, while the calculation of estimates is 5.8 times faster compared to the baseline. △ Less

Submitted 15 October, 2015; originally announced October 2015.

Comments: In Proceedings of the ACE Challenge Workshop - a satellite event of IEEE-WASPAA 2015 (arXiv:1510.00383)

Report number: ACEChallenge/2015/08

Nanoscale Phase Change Memory with Graphene Ribbon Electrodes

Authors: Ashkan Behnam, Feng Xiong, Andrea Cappelli, Ning C. Wang, Enrique A. Carrion, Sungduk Hong, Yuan Dai, Austin S. Lyons, Edmond K. Chow, Enrico Piccinini, Carlo Jacoboni, Eric Pop

Abstract: Phase change memory (PCM) devices are known to reduce in power consumption as the bit volume and contact area of their electrodes are scaled down. Here, we demonstrate two types of low-power PCM devices with lateral graphene ribbon electrodes: one in which the graphene is patterned into narrow nanoribbons and the other where the phase change material is patterned into nanoribbons. The sharp graphe… ▽ More Phase change memory (PCM) devices are known to reduce in power consumption as the bit volume and contact area of their electrodes are scaled down. Here, we demonstrate two types of low-power PCM devices with lateral graphene ribbon electrodes: one in which the graphene is patterned into narrow nanoribbons and the other where the phase change material is patterned into nanoribbons. The sharp graphene "edge" contacts enable switching with threshold voltages as low as ~3 V, low programming currents (<1 μA SET, <10 μA RESET) and ON/OFF ratios >100. Large-scale fabrication with graphene grown by chemical vapor deposition also enables the study of heterogeneous integration and that of variability for such nanomaterials and devices. △ Less

Submitted 20 August, 2015; originally announced August 2015.

Comments: submitted to Applied Physics Letters

Hysteresis-Free Nanosecond Pulsed Electrical Characterization of Top-Gated Graphene Transistors

Authors: Enrique A. Carrion, Andrey Y. Serov, Sharnali Islam, Ashkan Behnam, Akshay Malik, Feng Xiong, Massimiliano Bianchi, Roman Sordan, Eric Pop

Abstract: We measure top-gated graphene field effect transistors (GFETs) with nanosecond-range pulsed gate and drain voltages. Due to high-k dielectric or graphene imperfections, the drain current decreases ~10% over time scales of ~10 us, consistent with charge trap** mechanisms. Pulsed operation leads to hysteresis-free I-V characteristics, which are studied with pulses as short as 75 ns and 150 ns at t… ▽ More We measure top-gated graphene field effect transistors (GFETs) with nanosecond-range pulsed gate and drain voltages. Due to high-k dielectric or graphene imperfections, the drain current decreases ~10% over time scales of ~10 us, consistent with charge trap** mechanisms. Pulsed operation leads to hysteresis-free I-V characteristics, which are studied with pulses as short as 75 ns and 150 ns at the drain and gate, respectively. The pulsed operation enables reliable extraction of GFET intrinsic transconductance and mobility values independent of sweep direction, which are up to a factor of two higher than those obtained from simple DC characterization. We also observe drain-bias-induced charge trap** effects at lateral fields greater than 0.1 V/um. In addition, using modeling and capacitance-voltage measurements we extract charge trap densities up to 10^12 1/cm^2 in the top gate dielectric (here Al2O3). Our study illustrates important time- and field-dependent imperfections of top-gated GFETs with high-k dielectrics, which must be carefully considered for future developments of this technology △ Less

Submitted 31 March, 2014; originally announced April 2014.

Comments: to appear in IEEE Transactions on Electron Devices (2014)

Direct observation of nanometer-scale Joule and Peltier effects in phase change memory devices

Authors: Kyle L. Grosse, Feng Xiong, Sungduk Hong, William P. King, Eric Pop

Abstract: We measure power dissipation in phase change memory (PCM) devices by scanning Joule ex-pansion microscopy (SJEM) with ~50 nm spatial and 0.2 K temperature resolution. The temperature rise in the Ge2Sb2Te5 (GST) is dominated by Joule heating, but at the GST-TiW contacts it is a combination of Peltier and current crowding effects. Comparison of SJEM and electrical characterization with simulations o… ▽ More We measure power dissipation in phase change memory (PCM) devices by scanning Joule ex-pansion microscopy (SJEM) with ~50 nm spatial and 0.2 K temperature resolution. The temperature rise in the Ge2Sb2Te5 (GST) is dominated by Joule heating, but at the GST-TiW contacts it is a combination of Peltier and current crowding effects. Comparison of SJEM and electrical characterization with simulations of the PCM devices uncovers a thermopower ~350 uV/K for 25 nm thick films of face centered-cubic crystallized GST, and contact resistance ~2.0 x 10^-8 Ohm-m2. Knowledge of such nanoscale Joule, Peltier, and current crowding effects is essential for energy-efficient design of future PCM technology. △ Less

Submitted 21 May, 2013; originally announced May 2013.

Comments: includes supplement

Journal ref: Applied Physics Letters, vol. 102, p. 193503 (2013)

Ballistic to diffusive crossover of heat flow in graphene ribbons

Authors: Myung-Ho Bae, Zuanyi Li, Zlatan Aksamija, Pierre N. Martin, Feng Xiong, Zhun-Yong Ong, Irena Knezevic, Eric Pop

Abstract: Heat flow in nanomaterials is an important area of study, with both fundamental and technological implications. However, little is known about heat flow in two-dimensional (2D) devices or interconnects with dimensions comparable to the phonon mean free path (mfp). Here, we find that short, quarter-micron graphene samples reach ~35% of the ballistic heat conductance limit up to room temperature, en… ▽ More Heat flow in nanomaterials is an important area of study, with both fundamental and technological implications. However, little is known about heat flow in two-dimensional (2D) devices or interconnects with dimensions comparable to the phonon mean free path (mfp). Here, we find that short, quarter-micron graphene samples reach ~35% of the ballistic heat conductance limit up to room temperature, enabled by the relatively large phonon mfp (~100 nm) in substrate-supported graphene. In contrast, patterning similar samples into nanoribbons (GNRs) leads to a diffusive heat flow regime that is controlled by ribbon width and edge disorder. In the edge-controlled regime, the GNR thermal conductivity scales with width approximately as ~W^{1.8+/-0.3}, being about 100 W/m/K in 65-nm-wide GNRs, at room temperature. Manipulation of device dimensions on the scale of the phonon mfp can be used to achieve full control of their heat-carrying properties, approaching fundamentally limited upper or lower bounds. △ Less

Submitted 3 April, 2013; originally announced April 2013.

Comments: Nature Communications, DOI: 10.1038/ncomms2755 (2013)

Journal ref: Nature Communications 4, 1734 (2013)

Influence of initial size on higher cumulant ratios of net-proton number fluctuations

Authors: Fengbo Xiong, Lizhu Chen, Lin Li, Zhiming Li, Yuanfang Wu

Abstract: With the help of AMPT default model, we study the influence of initial size (centrality of collisions) on higher cumulant ratios of net-proton distributions. If the centrality is presented by impact parameter, there is a strong centrality dependent, in particular, in those peripheral collisions. This dependence is slightly reduced if the centrality is presented by number of participant, or charged… ▽ More With the help of AMPT default model, we study the influence of initial size (centrality of collisions) on higher cumulant ratios of net-proton distributions. If the centrality is presented by impact parameter, there is a strong centrality dependent, in particular, in those peripheral collisions. This dependence is slightly reduced if the centrality is presented by number of participant, or charged multiplicity. However, the dynamical ratios are almost centrality independent. So the centrality dependence of dynamical ratios at RHIC beam energy scan are presented. △ Less

Submitted 28 February, 2013; originally announced March 2013.

Comments: 3 pages, 2 figures

Effects of Tip-Nanotube Interactions on Atomic Force Microscopy Imaging of Carbon Nanotubes

Authors: Rouholla Alizadegan, Albert D. Liao, Feng Xiong, Eric Pop, K. Jimmy Hsia

Abstract: We examine the effect of van der Waals (vdW) interactions between atomic force microscope (AFM) tips and individual carbon nanotubes (CNTs) supported on SiO2. Molecular dynamics (MD) simulations reveal how CNTs deform during AFM measurement, irrespective of the AFM tip material. The apparent height of a single- (double-) walled CNT can be used to estimate its diameter up to ~2 nm (~3 nm), but for… ▽ More We examine the effect of van der Waals (vdW) interactions between atomic force microscope (AFM) tips and individual carbon nanotubes (CNTs) supported on SiO2. Molecular dynamics (MD) simulations reveal how CNTs deform during AFM measurement, irrespective of the AFM tip material. The apparent height of a single- (double-) walled CNT can be used to estimate its diameter up to ~2 nm (~3 nm), but for larger diameters the CNT cross-section is no longer circular. Our simulations were compared against CNT dimensions obtained from AFM measurements and resonant Raman spectroscopy, with good agreement for the smaller CNT di-ameters. In general, AFM measurements of large-diameter CNTs must be interpreted with care, but the reliability of the approach is improved if knowledge of the number of CNT walls is avail-able, or if additional verification (e.g. by optical techniques) can be obtained. △ Less

Submitted 6 July, 2012; originally announced July 2012.

Journal ref: Nano Res. 2012, 5(4): 235-247

Statistical and dynamical fluctuations of Binder ratios in heavy ion collisions

Authors: Zhiming Li, Fengbo Xiong, Yuanfang Wu

Abstract: Higher moments of net-proton Binder ratio, which is suggested to be a good experimental measurement to locate the QCD critical point, is measured in relativistic heavy ion collisions. We firstly estimate the effect of statistical fluctuations of the third and forth order Binder ratios. Then the dynamical Binder ratio is proposed and investigated in both transport and statistical models. The energy… ▽ More Higher moments of net-proton Binder ratio, which is suggested to be a good experimental measurement to locate the QCD critical point, is measured in relativistic heavy ion collisions. We firstly estimate the effect of statistical fluctuations of the third and forth order Binder ratios. Then the dynamical Binder ratio is proposed and investigated in both transport and statistical models. The energy dependence of dynamical Binder ratios with different system sizes at RHIC beam scan energies are presented and discussed. △ Less

Submitted 31 January, 2013; v1 submitted 13 September, 2011; originally announced September 2011.

Comments: 5 pages, 3 figures

Journal ref: J. Phys. G: Nucl. Part. Phys. 39 (2012) 085101

Inducing Chalcogenide Phase Change with Ultra-Narrow Carbon Nanotube Heaters

Authors: Feng Xiong, Albert Liao, Eric Pop

Abstract: Carbon nanotube (CNT) heaters with sub-5 nm diameter induce highly localized phase change in Ge2Sb2Te5 (GST) chalcogenide. A significant reduction in resistance of test structures is measured as the GST near the CNT heater crystallizes. Effective GST heating occurs at currents as low as 25 uA, significantly lower than in conventional phase change memory with metal electrodes (0.1-0.5 mA). Atomic… ▽ More Carbon nanotube (CNT) heaters with sub-5 nm diameter induce highly localized phase change in Ge2Sb2Te5 (GST) chalcogenide. A significant reduction in resistance of test structures is measured as the GST near the CNT heater crystallizes. Effective GST heating occurs at currents as low as 25 uA, significantly lower than in conventional phase change memory with metal electrodes (0.1-0.5 mA). Atomic force microscopy reveals nucleation sites associated with phase change in GST around the CNT heater. Finite element simulations confirm electrical characteristics consistent with the experiments, and reveal the current and phase distribution in GST. △ Less

Submitted 26 December, 2009; v1 submitted 24 October, 2009; originally announced October 2009.

Journal ref: Appl. Phys. Lett. 95, 243103 (2009)

3He Spin-Dependent Cross Sections and Sum Rules

Authors: E94010 Collaboration, K. Slifer, M. Amarian, L. Auerbach, T. Averett, J. Berthot, P. Bertin, B. Bertozzi, T. Black, E. Brash, D. Brown, E. Burtin, J. Calarco, G. Cates, Z. Chai, J. -P. Chen, Seonho Choi, E. Chudakov, C. Ciofi degli Atti, E. Cisbani, C. W. de Jager, A. Deur, R. DiSalvo, S. Dieterich, P. Djawotho , et al. (88 additional authors not shown)

Abstract: We present a measurement of the spin-dependent cross sections for the \vec{^3He}(\vec{e},e')X} reaction in the quasielastic and resonance regions at four-momentum transfer 0.1 < Q^2< 0.9 GeV^2. The spin-structure functions have been extracted and used to evaluate the nuclear Burkhardt--Cottingham and extended GDH sum rules for the first time. Impulse approximation and exact three-body Faddeev ca… ▽ More We present a measurement of the spin-dependent cross sections for the \vec{^3He}(\vec{e},e')X} reaction in the quasielastic and resonance regions at four-momentum transfer 0.1 < Q^2< 0.9 GeV^2. The spin-structure functions have been extracted and used to evaluate the nuclear Burkhardt--Cottingham and extended GDH sum rules for the first time. Impulse approximation and exact three-body Faddeev calculations are also compared to the data in the quasielastic region. △ Less

Submitted 11 July, 2008; v1 submitted 14 March, 2008; originally announced March 2008.

Comments: Final version

Journal ref: Phys.Rev.Lett.101:022303,2008