-
Cavity quantum electro-optics: Microwave-telecom conversion in the quantum ground state
Authors:
William Hease,
Alfredo Rueda,
Rishabh Sahu,
Matthias Wulf,
Georg Arnold,
Harald G. L. Schwefel,
Johannes M. Fink
Abstract:
Fiber optic communication is the backbone of our modern information society, offering high bandwidth, low loss, weight, size and cost, as well as an immunity to electromagnetic interference. Microwave photonics lends these advantages to electronic sensing and communication systems, but - unlike the field of nonlinear optics - electro-optic devices so far require classical modulation fields whose v…
▽ More
Fiber optic communication is the backbone of our modern information society, offering high bandwidth, low loss, weight, size and cost, as well as an immunity to electromagnetic interference. Microwave photonics lends these advantages to electronic sensing and communication systems, but - unlike the field of nonlinear optics - electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations. Here we present a cavity electro-optic transceiver operating in a millikelvin environment with a mode occupancy as low as 0.025 $\pm$ 0.005 noise photons. Our system is based on a lithium niobate whispering gallery mode resonator, resonantly coupled to a superconducting microwave cavity via the Pockels effect. For the highest continuous wave pump power of 1.48 mW we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a total (internal) efficiency of 0.03 % (0.7 %) and an added output conversion noise of 5.5 photons. The high bandwidth of 10.7 MHz combined with the observed very slow heating rate of 1.1 noise photons s$^{-1}$ puts quantum limited pulsed microwave-optics conversion within reach. The presented device is versatile and compatible with superconducting qubits, which might open the way for fast and deterministic entanglement distribution between microwave and optical fields, for optically mediated remote entanglement of superconducting qubits, and for new multiplexed cryogenic circuit control and readout strategies.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Converting microwave and telecom photons with a silicon photonic nanomechanical interface
Authors:
G. Arnold,
M. Wulf,
S. Barzanjeh,
E. S. Redchenko,
A. Rueda,
W. J. Hease,
F. Hassani,
J. M. Fink
Abstract:
Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but - despite growing efforts and rapid progress - existing solutions to interface the microwave and optical domains lack either scalability or efficiency,…
▽ More
Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but - despite growing efforts and rapid progress - existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer connecting the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135 %) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams and includes an optomechanical gain of about 20 dB. The chip-scale device is fabricated from CMOS compatible materials and achieves a V$_π$ as low as 16 $μ$V for sub-nanowatt pump powers. Such power-efficient, ultra-sensitive and highly integrated hybrid interconnects might find applications ranging from quantum communication and RF receivers to magnetic resonance imaging.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Stationary Entangled Radiation from Micromechanical Motion
Authors:
S. Barzanjeh,
E. S. Redchenko,
M. Peruzzo,
M. Wulf,
D. P. Lewis,
G. Arnold,
J. M. Fink
Abstract:
Mechanical systems facilitate the development of a new generation of hybrid quantum technology comprising electrical, optical, atomic and acoustic degrees of freedom. Entanglement is the essential resource that defines this new paradigm of quantum enabled devices. Continuous variable (CV) entangled fields, known as Einstein-Podolsky-Rosen (EPR) states, are spatially separated two-mode squeezed sta…
▽ More
Mechanical systems facilitate the development of a new generation of hybrid quantum technology comprising electrical, optical, atomic and acoustic degrees of freedom. Entanglement is the essential resource that defines this new paradigm of quantum enabled devices. Continuous variable (CV) entangled fields, known as Einstein-Podolsky-Rosen (EPR) states, are spatially separated two-mode squeezed states that can be used to implement quantum teleportation and quantum communication. In the optical domain, EPR states are typically generated using nondegenerate optical amplifiers and at microwave frequencies Josephson circuits can serve as a nonlinear medium. It is an outstanding goal to deterministically generate and distribute entangled states with a mechanical oscillator. Here we observe stationary emission of path-entangled microwave radiation from a parametrically driven 30 micrometer long silicon nanostring oscillator, squeezing the joint field operators of two thermal modes by 3.40(37) dB below the vacuum level. This mechanical system correlates up to 50 photons/s/Hz giving rise to a quantum discord that is robust with respect to microwave noise. Such generalized quantum correlations of separable states are important for quantum enhanced detection and provide direct evidence for the non-classical nature of the mechanical oscillator without directly measuring its state. This noninvasive measurement scheme allows to infer information about otherwise inaccessible objects with potential implications in sensing, open system dynamics and fundamental tests of quantum gravity. In the near future, similar on-chip devices can be used to entangle subsystems on vastly different energy scales such as microwave and optical photons.
△ Less
Submitted 15 February, 2019; v1 submitted 16 September, 2018;
originally announced September 2018.
-
A full vectorial map** of nanophotonic light fields
Authors:
B. le Feber,
J. E. Sipe,
M. Wulf,
L. Kuipers,
N. Rotenberg
Abstract:
Light is a union of electric and magnetic fields, and nowhere is their complex relationship more evident than in the near fields of nanophotonic structures. There, complicated electric and magnetic fields varying over subwavelength scales are generally present, leading to photonic phenomena such as extraordinary optical momentum, super-chiral fields, and a complex spatial evolution of optical sing…
▽ More
Light is a union of electric and magnetic fields, and nowhere is their complex relationship more evident than in the near fields of nanophotonic structures. There, complicated electric and magnetic fields varying over subwavelength scales are generally present, leading to photonic phenomena such as extraordinary optical momentum, super-chiral fields, and a complex spatial evolution of optical singularities. An understanding of such phenomena requires nanoscale measurements of the complete optical field vector. However, while it was recently demonstrated that near-field scanning optical microscopy is sensitive to the complete electromagnetic field, a separation of the different components required a priori knowledge of the sample. Here we introduce a robust algorithm that can disentangle all six electric and magnetic field components from a single near-field measurement, without any numerical modeling of the structure. As examples, we unravel the fields of two prototypical nanophotonic structures: a photonic crystal waveguide and a plasmonic nanowire. These results pave the way to new studies of complex photonic phenomena at the nanoscale, and for the design of structures that optimize the optical behavior that they exhibit.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Mechanical On-Chip Microwave Circulator
Authors:
S. Barzanjeh,
M. Wulf,
M. Peruzzo,
M. Kalaee,
P. B. Dieterle,
O. Painter,
J. M. Fink
Abstract:
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir e…
▽ More
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir engineered optomechanical interactions. Directional circulation is achieved with controlled phase-sensitive interference of six distinct electro-mechanical signal conversion paths. The presented circulator is compact, its silicon-on-insulator platform is compatible with both superconducting qubits and silicon photonics, and its noise performance is close to the quantum limit. With a high dynamic range, a tunable bandwidth of up to 30 MHz and an in-situ reconfigurability as beam splitter or wavelength converter, it could pave the way for superconducting qubit processors with integrated and multiplexed on-chip signal processing and readout.
△ Less
Submitted 6 June, 2017; v1 submitted 1 June, 2017;
originally announced June 2017.
-
A self-referenced single-electron quantized-current source
Authors:
Lukas Fricke,
Michael Wulf,
Bernd Kaestner,
Frank Hohls,
Philipp Mirovsky,
Brigitte Mackrodt,
Ralf Dolata,
Thomas Weimann,
Klaus Pierz,
Uwe Siegner,
Hans W. Schumacher
Abstract:
With the anticipated redefinition of the international system of units (SI) the base units will be linked to fundamental constants of nature [1]. As for the electrical base unit "Ampere", it will be linked to the elementary charge e, requiring a corresponding quantum standard [2, 3]. Many concepts for such a standard have been investigated [4-14] relying on controlling the time-dependent tunnellin…
▽ More
With the anticipated redefinition of the international system of units (SI) the base units will be linked to fundamental constants of nature [1]. As for the electrical base unit "Ampere", it will be linked to the elementary charge e, requiring a corresponding quantum standard [2, 3]. Many concepts for such a standard have been investigated [4-14] relying on controlling the time-dependent tunnelling of electrons. However, the stochastic nature of quantum mechanical tunnelling intrinsically evokes uncontrolled deviations from the nominally quantized current. Alternatively, the counting of electrons [15, 16] has been explored but is severely limited in current amplitude and uncertainty by the low detector bandwidth. The late M. Wulf proposed [17] that this fundamental problem of electrical quantum metrology could be overcome by combining serial single-electron pumps with charge detectors allowing the generation of a quantized current and the in-situ detection of its stochastic deviations. Here, we experimentally demonstrate such quantized-current generation with in-situ detection of tunnelling errors at low frequencies and a reduction of the total current uncertainty by more than one order of magnitude. After frequency scaling this should enable a validated primary standard for the redefined SI base unit Ampere.
△ Less
Submitted 19 December, 2013;
originally announced December 2013.
-
Counting statistics for electron capture in a dynamic quantum dot
Authors:
Lukas Fricke,
Michael Wulf,
Bernd Kaestner,
Vyacheslavs Kashcheyevs,
Janis Timoshenko,
Pavel Nazarov,
Frank Hohls,
Philipp Mirovsky,
Brigitte Mackrodt,
Ralf Dolata,
Thomas Weimann,
Klaus Pierz,
Hans W. Schumacher
Abstract:
We report non-invasive single-charge detection of the full probability distribution $P_n$ of the initialization of a quantum dot with $n$ electrons for rapid decoupling from an electron reservoir. We analyze the data in the context of a model for sequential tunneling pinch-off, which has generic solutions corresponding to two opposing mechanisms. One limit considers sequential "freeze out" of an a…
▽ More
We report non-invasive single-charge detection of the full probability distribution $P_n$ of the initialization of a quantum dot with $n$ electrons for rapid decoupling from an electron reservoir. We analyze the data in the context of a model for sequential tunneling pinch-off, which has generic solutions corresponding to two opposing mechanisms. One limit considers sequential "freeze out" of an adiabatically evolving grand canonical distribution, the other one is an athermal limit equivalent to the solution of a generalized decay cascade model. We identify the athermal capturing mechanism in our sample, testifying to the high precision of our combined theoretical and experimental methods. The distinction between the capturing mechanisms allows to derive efficient experimental strategies for improving the initialization.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
An error accounting algorithm for electron counting experiments
Authors:
Michael Wulf
Abstract:
Electron counting experiments attempt to provide a current of a known number of electrons per unit time. We propose architectures utilizing a few readily available electron-pumps or turnstiles with modest error rates of 1 part per $10^4$ with common sensitive electrometers to achieve the desirable accuracy of 1 part in $10^8$. This is achieved not by counting all transferred electrons but by count…
▽ More
Electron counting experiments attempt to provide a current of a known number of electrons per unit time. We propose architectures utilizing a few readily available electron-pumps or turnstiles with modest error rates of 1 part per $10^4$ with common sensitive electrometers to achieve the desirable accuracy of 1 part in $10^8$. This is achieved not by counting all transferred electrons but by counting only the errors of individual devices; these are less frequent and therefore readily recognized and accounted for. Our proposal thereby eases the route towards quantum based standards for current and capacitance.
△ Less
Submitted 4 September, 2012;
originally announced September 2012.
-
Alpaga: A Tool for Solving Parity Games with Imperfect Information
Authors:
Dietmar Berwanger,
Krishnendu Chatterjee,
Martin De Wulf,
Laurent Doyen,
Thomas A. Henzinger
Abstract:
Alpaga is a solver for two-player parity games with imperfect information. Given the description of a game, it determines whether the first player can ensure to win and, if so, it constructs a winning strategy. The tool provides a symbolic implementation of a recent algorithm based on antichains.
Alpaga is a solver for two-player parity games with imperfect information. Given the description of a game, it determines whether the first player can ensure to win and, if so, it constructs a winning strategy. The tool provides a symbolic implementation of a recent algorithm based on antichains.
△ Less
Submitted 29 January, 2009;
originally announced January 2009.
-
Error accounting in electron counting experiments
Authors:
Michael Wulf,
Alexander B. Zorin
Abstract:
Electron counting experiments attempt to provide a current of a known number of electrons per unit time. We propose architectures utilizing a few readily available electron-pumps or turnstiles with the typical error rates of 100 ppm with common sensitive electrometers to achieve the desirable accuracy of 1 part in 10 ppb. This is achieved not by counting all transferred electrons but by counting…
▽ More
Electron counting experiments attempt to provide a current of a known number of electrons per unit time. We propose architectures utilizing a few readily available electron-pumps or turnstiles with the typical error rates of 100 ppm with common sensitive electrometers to achieve the desirable accuracy of 1 part in 10 ppb. This is achieved not by counting all transferred electrons but by counting only the errors of individual devices; these are less frequent and therefore readily recognized and accounted for. We thereby ease the route towards quantum based standards for current and capacitance.
△ Less
Submitted 24 November, 2008;
originally announced November 2008.
-
Dispersive Manipulation of Paired Superconducting Qubits
Authors:
Xingxiang Zhou,
Michael Wulf,
Zhengwei Zhou,
Guangcan Guo,
Marc J. Feldman
Abstract:
We combine the ideas of qubit encoding and dispersive dynamics to enable robust and easy quantum information processing (QIP) on paired superconducting charge boxes sharing a common bias lead. We establish a decoherence free subspace on these and introduce universal gates by dispersive interaction with a LC resonator and inductive couplings between the encoded qubits. These gates preserve the co…
▽ More
We combine the ideas of qubit encoding and dispersive dynamics to enable robust and easy quantum information processing (QIP) on paired superconducting charge boxes sharing a common bias lead. We establish a decoherence free subspace on these and introduce universal gates by dispersive interaction with a LC resonator and inductive couplings between the encoded qubits. These gates preserve the code space and only require the established local symmetry and the control of the voltage bias.
△ Less
Submitted 16 July, 2003;
originally announced July 2003.
-
Non-closure of constraint algebra in N=1 supergravity
Authors:
Matthias Wulf
Abstract:
The algebra of constraints arising in the canonical quantization of N=1 supergravity in four dimensions is investigated. Using the holomorphic action, the structure functions of the algebra are given and it is shown that the algebra does not close formally for two chosen operator orderings.
The algebra of constraints arising in the canonical quantization of N=1 supergravity in four dimensions is investigated. Using the holomorphic action, the structure functions of the algebra are given and it is shown that the algebra does not close formally for two chosen operator orderings.
△ Less
Submitted 9 June, 1997; v1 submitted 17 June, 1996;
originally announced June 1996.
