Showing 1–15 of 15 results for author: Wood, V

Phonon-driven wavefunction localization promotes room-temperature, pure single-photon emission in large organic-inorganic lead-halide quantum dots

Authors: Leon G. Feld, Simon C. Boehme, Sebastian Sabisch, Nadav Frenkel, Nuri Yazdani, Viktoriia Morad, Chenglian Zhu, Mariia Svyrydenko, Rui Tao, Maryna Bodnarchuk, Gur Lubin, Miri Kazes, Vanessa Wood, Dan Oron, Gabriele Rainò, Maksym V. Kovalenko

Abstract: In lead halide perovskites (APbX3), the effect of the A-site cation on optical and electronic properties has initially been thought to be marginal. Yet, evidence of beneficial effects on solar cell performance and light emission is accumulating. Here, we report that the A-cation in soft APbBr3 colloidal quantum dots (QDs) controls the phonon-induced localization of the exciton wavefunction. Insigh… ▽ More In lead halide perovskites (APbX3), the effect of the A-site cation on optical and electronic properties has initially been thought to be marginal. Yet, evidence of beneficial effects on solar cell performance and light emission is accumulating. Here, we report that the A-cation in soft APbBr3 colloidal quantum dots (QDs) controls the phonon-induced localization of the exciton wavefunction. Insights from ab initio molecular dynamics and single-particle fluorescence spectroscopy demonstrate that anharmonic lattice vibrations and the resulting polymorphism act as an additional confinement potential. Avoiding the trade-off between single-photon purity and optical stability faced by downsizing conventional QDs into the strong confinement regime, dynamical phonon-induced confinement in large organic-inorganic perovskite QDs enables bright (10^6 photons/s), stable (> 1h), and pure (> 95%) single-photon emission in a widely tuneable spectral range (495-745 nm). Strong electron-phonon interaction in soft perovskite QDs provides an unconventional route toward the development of scalable room-temperature quantum light sources. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Dynamic Retrieval Augmented Generation of Ontologies using Artificial Intelligence (DRAGON-AI)

Authors: Sabrina Toro, Anna V Anagnostopoulos, Sue Bello, Kai Blumberg, Rhiannon Cameron, Leigh Carmody, Alexander D Diehl, Damion Dooley, William Duncan, Petra Fey, Pascale Gaudet, Nomi L Harris, Marcin Joachimiak, Leila Kiani, Tiago Lubiana, Monica C Munoz-Torres, Shawn O'Neil, David Osumi-Sutherland, Aleix Puig, Justin P Reese, Leonore Reiser, Sofia Robb, Troy Ruem**, James Seager, Eric Sid , et al. (5 additional authors not shown)

Abstract: Background: Ontologies are fundamental components of informatics infrastructure in domains such as biomedical, environmental, and food sciences, representing consensus knowledge in an accurate and computable form. However, their construction and maintenance demand substantial resources and necessitate substantial collaboration between domain experts, curators, and ontology experts. We present Dyna… ▽ More Background: Ontologies are fundamental components of informatics infrastructure in domains such as biomedical, environmental, and food sciences, representing consensus knowledge in an accurate and computable form. However, their construction and maintenance demand substantial resources and necessitate substantial collaboration between domain experts, curators, and ontology experts. We present Dynamic Retrieval Augmented Generation of Ontologies using AI (DRAGON-AI), an ontology generation method employing Large Language Models (LLMs) and Retrieval Augmented Generation (RAG). DRAGON-AI can generate textual and logical ontology components, drawing from existing knowledge in multiple ontologies and unstructured text sources. Results: We assessed performance of DRAGON-AI on de novo term construction across ten diverse ontologies, making use of extensive manual evaluation of results. Our method has high precision for relationship generation, but has slightly lower precision than from logic-based reasoning. Our method is also able to generate definitions deemed acceptable by expert evaluators, but these scored worse than human-authored definitions. Notably, evaluators with the highest level of confidence in a domain were better able to discern flaws in AI-generated definitions. We also demonstrated the ability of DRAGON-AI to incorporate natural language instructions in the form of GitHub issues. Conclusions: These findings suggest DRAGON-AI's potential to substantially aid the manual ontology construction process. However, our results also underscore the importance of having expert curators and ontology editors drive the ontology generation process. △ Less

Submitted 12 June, 2024; v1 submitted 17 December, 2023; originally announced December 2023.

Large-Scale Bottom-Up Fabricated 3D Nonlinear Photonic Crystals

Authors: Viola Valentina Vogler-Neuling, Ülle-Linda Talts, Rebecca Ferraro, Helena Weigand, Giovanni Finco, Joel Winiger, Peter Benedek, Justine Kusch, Artemios Karvounis, Vanessa Wood, Jürg Leuthold, Rachel Grange

Abstract: Nonlinear optical effects are used to generate coherent light at wavelengths difficult to reach with lasers. Materials periodically poled or nanostructured in the nonlinear susceptibility in three spatial directions are called 3D nonlinear photonic crystals (NPhCs). They enable enhanced nonlinear optical conversion efficiencies, emission control, and simultaneous generation of nonlinear wavelength… ▽ More Nonlinear optical effects are used to generate coherent light at wavelengths difficult to reach with lasers. Materials periodically poled or nanostructured in the nonlinear susceptibility in three spatial directions are called 3D nonlinear photonic crystals (NPhCs). They enable enhanced nonlinear optical conversion efficiencies, emission control, and simultaneous generation of nonlinear wavelengths. The chemical inertness of efficient second-order nonlinear materials ($χ^{(2)}$) prohibited their nanofabrication until 2018. The current method is restricted to top-down laser-based techniques limiting the periodicity along z-axis to 10 um. We demonstrate the first bottom-up fabricated 3D NPhC in sol-gel derived barium titanate by soft-nanoimprint lithography: a woodpile with eight layers and periodicities of 1 um (xy-plane) and 300 nm (z-plane). The surface areas exceed $5.3\cdot 10^4$ um^2, which is two orders of magnitude larger than the state-of-the-art. This study is expected to initiate bottom-up fabrication of 3D NPhCs with a supremely strong and versatile nonlinear response. △ Less

Submitted 5 October, 2023; originally announced October 2023.

Comments: 11 pages, 4 figures

Sol-gel Barium Titanate Nanohole Array as a Nonlinear Metasurface and a Photonic Crystal

Authors: Ülle-Linda Talts, Helena C. Weigand, Grégoire Saerens, Peter Benedek, Joel Winiger, Vanessa Wood, Jürg Leuthold, Viola Vogler-Neuling, Rachel Grange

Abstract: The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows optical properties of a 2D photonic crystal and metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct so… ▽ More The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows optical properties of a 2D photonic crystal and metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct soft nanoimprint lithography with sol-gel derived barium titanate enabling critical dimensions of 120 nm with aspect ratios of 5. The nanohole array exhibits a photonic bandgap in the infrared range when probed along the slab axis while lattice resonant states are observed in out-of-plane transmission configuration. The enhanced light-matter interaction from the resonant structure enables to increase the second-harmonic generation in the near-UV by a factor of 18 illustrating the potential in the flexible fabrication technique for barium titanate photonic devices. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Facilitating Bioinformatics Reproducibility

Authors: Christopher R. Keefe, Matthew R. Dillon, Chloe Herman, Mary Jewell, Colin V. Wood, Evan Bolyen, J. Gregory Caporaso

Abstract: Study reproducibility is essential to corroborate, build on, and learn from the results of scientific research but is notoriously challenging in bioinformatics, which often involves large data sets and complex analytic workflows involving many different tools. Additionally many biologists aren't trained in how to effectively record their bioinformatics analysis steps to ensure reproducibility, so… ▽ More Study reproducibility is essential to corroborate, build on, and learn from the results of scientific research but is notoriously challenging in bioinformatics, which often involves large data sets and complex analytic workflows involving many different tools. Additionally many biologists aren't trained in how to effectively record their bioinformatics analysis steps to ensure reproducibility, so critical information is often missing. Software tools used in bioinformatics can automate provenance tracking of the results they generate, removing most barriers to bioinformatics reproducibility. Here we present an implementation of that idea, Provenance Replay, a tool for generating new executable code from results generated with the QIIME 2 bioinformatics platform, and discuss considerations for bioinformatics developers who wish to implement similar functionality in their software. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Comments: 5 pages, 2 figures

DRT-based modelling framework for Li-ion cells

Authors: Pietro Iurilli, Claudio Brivio, Rafael E. Carrillo, Vanessa Wood

Abstract: The correct assessment of battery states is essential to maximize battery pack performances while ensuring reliable and safe operation. This work introduces EIS2MOD, a novel modelling framework for Li-ion cells based on Distribution of Relaxation Time (DRT). A physically based Electric Circuit Model (ECM) is developed starting from Electrochemical Impedance Spectroscopy (EIS) and Open Circuit Volt… ▽ More The correct assessment of battery states is essential to maximize battery pack performances while ensuring reliable and safe operation. This work introduces EIS2MOD, a novel modelling framework for Li-ion cells based on Distribution of Relaxation Time (DRT). A physically based Electric Circuit Model (ECM) is developed starting from Electrochemical Impedance Spectroscopy (EIS) and Open Circuit Voltage (OCV) measurements. DRT is applied to deconvolve the electrochemical phenomena from the EIS. The presented methodology is based on: i) DRT calculation from EIS, ii) DRT analysis for ECM configuration and iii) Model parameters extraction and fitting. The proposed framework is applied to large format Li-ion pouch cells, which are tested over the whole State of Charge (SoC) range and a wide temperature range (-10°C to 35°C). Different current profiles have been tested to validate the model, showing its high accuracy in reproducing the battery cell behavior (e.g. RMSE on the battery terminals voltage lower than 1.50% for driving cycle simulations at variable temperature and SoC). An additional advantage of EIS2MOD is its light computational load thus offering an attractive framework for battery management system implementation. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: 11 pages, 10 figures

Journal ref: IEEE Transactions on Industry Applications, Vol. 58, No. 2, pp 1429-1439, March-April 2022

Phonon-Mediated Attractive Interactions between Excitons in Lead-Halide-Perovskites

Authors: Nuri Yazdani, Maryna I. Bodnarchuk, Federica Bertolotti, Norberto Masciocchi, Ina Fureraj, Burak Guzelturk, Benjamin L. Cotts, Marc Zajac, Gabriele Rainò, Maximilian Jansen, Simon C. Boehme, Maksym Yarema, Ming-Fu Lin, Michael Kozina, Alexander Reid, Xiaozhe Shen, Stephen Weathersby, Xijie Wang, Eric Vauthey, Antonietta Guagliardi, Maksym V. Kovalenko, Vanessa Wood, Aaron Lindenberg

Abstract: Understanding the origin of electron-phonon coupling in lead-halide perovskites (LHP) is key to interpreting and leveraging their optical and electronic properties. Here we perform femtosecond-resolved, optical-pump, electron-diffraction-probe measurements to quantify the lattice reorganization occurring as a result of photoexcitation in LHP nanocrystals. Photoexcitation is found to drive a reduct… ▽ More Understanding the origin of electron-phonon coupling in lead-halide perovskites (LHP) is key to interpreting and leveraging their optical and electronic properties. Here we perform femtosecond-resolved, optical-pump, electron-diffraction-probe measurements to quantify the lattice reorganization occurring as a result of photoexcitation in LHP nanocrystals. Photoexcitation is found to drive a reduction in lead-halide octahedra tilts and distortions in the lattice, a result of deformation potential coupling to low energy optical phonons. Our results indicate particularly strong coupling in FAPbBr3, and far weaker coupling in CsPbBr3, highlighting differences in the dominant machanisms governing electron-phonon coupling in LHPs. We attribute the enhanced coupling in FAPbBr3 to its disordered crystal structure, which persists down to cryogenic temperatures. We find the reorganizations induced by each exciton in a multiexcitonic state constructively interfere, giving rise to a coupling strength which scales quadratically with the exciton number. This superlinear scaling induces phonon-mediated attractive interactions between excitations in LHPs. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Dynamic lattice distortions driven by surface trap** in semiconductor nanocrystals

Authors: Burak Guzelturk, Benjamin L. Cotts, Dipti Jasrasaria, John P. Philbin, David A. Hanifi, Brent A. Koscher, Arunima D. Balan, Ethan Curling, Marc Zajac, Suji Park, Nuri Yazdani, Clara Nyby, Vladislav Kamysbayev, Stefan Fischer, Zach Nett, Xiaozhe Shen, Michael E. Kozina, Ming-Fu Lin, Alexander H. Reid, Stephen P. Weathersby, Richard D. Schaller, Vanessa Wood, Xijie Wang, Jennifer A. Dionne, Dmitri V. Talapin , et al. (4 additional authors not shown)

Abstract: Nonradiative processes limit optoelectronic functionality of nanocrystals and curb their device performance. Nevertheless, the dynamic structural origins of nonradiative relaxations in nanocrystals are not understood. Here, femtosecond electron diffraction measurements corroborated by atomistic simulations uncover transient lattice deformations accompanying radiationless electronic processes in se… ▽ More Nonradiative processes limit optoelectronic functionality of nanocrystals and curb their device performance. Nevertheless, the dynamic structural origins of nonradiative relaxations in nanocrystals are not understood. Here, femtosecond electron diffraction measurements corroborated by atomistic simulations uncover transient lattice deformations accompanying radiationless electronic processes in semiconductor nanocrystals. Investigation of the excitation energy dependence shows that hot carriers created by a photon energy considerably larger than the bandgap induce structural distortions at nanocrystal surfaces on few picosecond timescales associated with the localization of trapped holes. On the other hand, carriers created by a photon energy close to the bandgap result in transient lattice heating that occurs on a much longer 200 ps timescale, governed by an Auger heating mechanism. Elucidation of the structural deformations associated with the surface trap** of hot holes provides atomic-scale insights into the mechanisms deteriorating optoelectronic performance and a pathway towards minimizing these losses in nanocrystal devices. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Comments: 17 pages, 4 figures

Journal ref: Nature Communications (2021)

Phase Transitions in Germanium Telluride Nanoparticle Phase-Change Materials Studied by Time-Resolved X-Ray Diffraction

Authors: Ann-Katrin U. Michel, Felix Donat, Aurelia Siegfried, Olesya Yarema, Hanbing Fang, Maksym Yarema, Vanessa Wood, Christoph R. Müller, David J. Norris

Abstract: Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $α$ and $γ$) and one at high temperature (crystalline $β$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been… ▽ More Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $α$ and $γ$) and one at high temperature (crystalline $β$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been investigated as a phase-change material for photonics, thermoelectrics, ferroelectrics, and spintronics. Consequently, the temperature-dependent phase transitions in GeTe have been studied for bulk and thin-film GeTe, both fabricated by sputtering. Colloidal synthesis of nanoparticles offers a more flexible fabrication approach for amorphous and crystalline GeTe. These nanoparticles are known to exhibit size-dependent properties, such as an increased crystallization temperature for the amorphous-to-$α$ transition in sub-10\,nm GeTe particles. The $α$-to-$β$ phase transition is also expected to vary with size, but this effect has not yet been investigated for GeTe. Here, we report time-resolved X-ray diffraction of GeTe nanoparticles with different diameters and from different synthetic protocols. We observe a non-volatile amorphous-to-$α$ transition between 210$^{\circ}$C and 240$^{\circ}$C and a volatile $α$-to-$β$ transition between 370$^{\circ}$C and 420$^{\circ}$C. The latter transition was reversible and repeatable. While the transition temperatures are shifted relative to the values known for bulk GeTe, the nanoparticle-based samples still exhibit the same structural phases reported for sputtered GeTe. Thus, colloidal GeTe maintains the same general phase behavior as bulk GeTe while allowing for more flexible and accessible fabrication. Therefore, nanoparticle-based GeTe films show great potential for applications, such as in active photonics. △ Less

Submitted 20 November, 2020; originally announced November 2020.

Spectrally-resolved dielectric function of amorphous and crystalline GeTe nanoparticle thin films

Authors: Ann-Katrin U. Michel, Marilyne Sousa, Maksym Yarema, Olesya Yarema, Vladimir Ovuka, Nolan Lassaline, Vanessa Wood, David J. Norris

Abstract: Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typi… ▽ More Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typically fabricated as thin films via sputtering, which is costly, requires advanced equipment, and limits the sample and device design. Here, we investigate a simpler and more flexi-ble approach for applications in tunable photonics: the use of sub-10 nm colloidal PCM nanoparticles (NPs). We report the optical properties of amorphous and crystalline germanium telluride (GeTe) NP thin films from the infrared to the ultraviolet spectral range. Using spectroscopic ellipsometry with support from cross-sectional scanning electron microscopy, atomic force microscopy, and absorption spectroscopy, we extract refractive indices n, extinction coefficients k, and band gaps Eg and compare to values known for sputtered GeTe thin films. We find a decrease of n and k and an increase of Eg for NP-based GeTe films, yielding insights into size-dependent property changes for nanoscale PCMs. Furthermore, our results reveal the suitability of GeTe NPs for tunable photonics in the near-infrared and visible spectral range. Finally, we studied sample reproducibility and aging of our NP films. We found that the colloidally-prepared PCM thin films were stable for at least two months stored under nitrogen, further supporting the great promise of these materials in applications. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: Optical Materials Engineering Laboratory, ETH Zurich, 8092 Zurich, Switzerland. IBM Research-Zurich, Rüschlikon, Switzerland. Materials and Device Engineering Group, Department of Information Technology and Electrical Engineering, ETH Zurich, 8092 Zurich, Switzerland

Charge Transport in Semiconductors Assembled from Nanocrystals

Authors: Nuri Yazdani, Samuel Andermatt, Maksym Yarema, Vasco Farto, Mohammad Hossein Bani-Hashemian, Sebastian Volk, Weyde Lin, Olesya Yarema, Mathieu Luisier, Vanessa Wood

Abstract: The potential of semiconductors assembled from nanocrystals (NC semiconductors) has been demonstrated for a broad array of electronic and optoelectronic devices, including transistors, light emitting diodes, solar cells, photodetectors, thermoelectrics, and phase charge memory cells. Despite the commercial success of nanocrystals as optical absorbers and emitters, applications involving charge tra… ▽ More The potential of semiconductors assembled from nanocrystals (NC semiconductors) has been demonstrated for a broad array of electronic and optoelectronic devices, including transistors, light emitting diodes, solar cells, photodetectors, thermoelectrics, and phase charge memory cells. Despite the commercial success of nanocrystals as optical absorbers and emitters, applications involving charge transport through NC semiconductors have eluded exploitation due to the inability for predictive control of their electronic properties. Here, we perform large-scale, ab-initio simulations to understand carrier transport, generation, and trap** in NC-based semiconductors from first principles. We use these findings to build the first predictive model for charge transport in NC semiconductors, which we validate experimentally. Our work reveals that we have been thinking about transport in NC semiconductors incorrectly. Our new insights provide a path for systematic engineering of NC semiconductors, which in fact offer previously unexplored opportunities for tunability not achievable in other semiconductor systems. △ Less

Submitted 6 January, 2020; v1 submitted 20 September, 2019; originally announced September 2019.

Comments: 4 figures at the bottom of document

Topological and Network Analysis of Lithium Ion Battery Components: The Importance of Pore Space Connectivity for Cell Operation

Authors: Marie Francine Lagadec, Raphael Zahn, Simon Müller, Vanessa Wood

Abstract: The structure of lithium ion battery components, such as electrodes and separators, are commonly characterised in terms of their porosity and tortuosity. The ratio of these values gives the effective transport of lithium ions in the electrolyte-filled pore spaces, which can be used to determine the ionic resistivity and corresponding voltage losses. Here, we show that these microstructural charact… ▽ More The structure of lithium ion battery components, such as electrodes and separators, are commonly characterised in terms of their porosity and tortuosity. The ratio of these values gives the effective transport of lithium ions in the electrolyte-filled pore spaces, which can be used to determine the ionic resistivity and corresponding voltage losses. Here, we show that these microstructural characteristics are not sufficient. Analysis of tomographic data of commercial separators reveals that different polyolefin separators have similar porosity and through-plane tortuosity, which, in the homogenised picture of lithium ion cell operation, would imply that these different separators exhibit similar performance. However, numerical diffusion simulations indicate that this is not the case. We demonstrate that the extent to which lithium ion concentration gradients are induced or smoothed by the separator structure is linked to pore space connectivity, a parameter that can be determined by topological or network based analysis of separators. These findings enable us to propose how to design separator microstructures that are safer and accommodate fast charge and discharge. △ Less

Submitted 23 May, 2018; originally announced June 2018.

Comments: Main article on pages on pages 1-8, supporting information on pages 9-15

Influence of the Surface of a Nanocrystal on its Electronic and Phononic Properties

Authors: Nuri Yazdani, Deniz Bozyigit, Kantawong Vuttivorakulchai, Mathieu Luisier, Vanessa Wood

Abstract: Over the past thirty years, it has been consistently observed that surface engineering of colloidal nanocrystals (NC) is key to their performance parameters. In the case of lead chalcogenide NCs, for example, replacing thiols with halide anion surface termination has been shown to increase power conversion efficiency in NC-based solar cells. To gain insight into the origins of these improvements,… ▽ More Over the past thirty years, it has been consistently observed that surface engineering of colloidal nanocrystals (NC) is key to their performance parameters. In the case of lead chalcogenide NCs, for example, replacing thiols with halide anion surface termination has been shown to increase power conversion efficiency in NC-based solar cells. To gain insight into the origins of these improvements, we perform ab initio molecular dynamics (AIMD) on experimentally-relevant sized lead sulfide (PbS) NCs constructed with thiol or Cl, Br, and I anion surfaces. The surface of both the thiol- and halide-terminated NCs exhibit low and high-energy phonon modes with large thermal displacements not present in bulk PbS; however, halide anion surface termination reduces the overlap of the electronic wavefunctions with these vibration modes. These findings suggest that electron-phonon interactions will be reduced in the halide terminated NCs, a conclusion that is supported by analyzing the time-dependent evolution of the electronic energies and wavefunctions extracted from the AIMD. This work explains why electron-phonon interactions are crucial to charge carrier dynamics in NCs and how surface engineering can be applied to systematically control their electronic and phononic properties. Furthermore, we propose that the computationally efficient approach of gauging electron-phonon interaction implemented here can be used to guide the design of application-specific surface terminations for arbitrary nanomaterials. △ Less

Submitted 29 November, 2016; originally announced November 2016.

Journal ref: Nano Lett., 2018, 18, 4, 2233-2242

Non-Resonant Thermal Admittance Spectroscopy

Authors: Deniz Bozyigit, Vanessa Wood

Abstract: Thermal Admittance Spectroscopy (TAS) as become a popular technique to determine trap state density and energetic position in semiconductors. In the limit of a large number of trap states ($>10^{16} \text{cm}^{-3}$), Fermi-level pinning undermines the assumptions used in the analysis of TAS data, which leads to a significant underestimation of the trap state density. Here, we develop the tools to… ▽ More Thermal Admittance Spectroscopy (TAS) as become a popular technique to determine trap state density and energetic position in semiconductors. In the limit of a large number of trap states ($>10^{16} \text{cm}^{-3}$), Fermi-level pinning undermines the assumptions used in the analysis of TAS data, which leads to a significant underestimation of the trap state density. Here, we develop the tools to detect and account for the occurrence of Fermi-level pinning in TAS measurements. △ Less

Submitted 12 December, 2014; originally announced December 2014.

Comments: This report is related to the PhD thesis of Deniz Bozyigit, submitted to ETH Zurich

Nanophotonic Luminescent Solar Concentrators

Authors: I. Rousseau, V. Wood

Abstract: We investigate the connection between photonic local density of states and luminescent solar concentrator (LSC) performance in two manufacturable nanocavity LSC structures, a bilayer slab and a slab photonic crystal. Finite-difference time-domain electromagnetic simulations show that the waveguided luminescence photon flux can be enhanced up to 30% for the photonic crystal design over a convention… ▽ More We investigate the connection between photonic local density of states and luminescent solar concentrator (LSC) performance in two manufacturable nanocavity LSC structures, a bilayer slab and a slab photonic crystal. Finite-difference time-domain electromagnetic simulations show that the waveguided luminescence photon flux can be enhanced up to 30% for the photonic crystal design over a conventional LSC operating in the ray optic limit assuming the same number of excited lumophores. Further photonic engineering could realize an increase of up to one order of magnitude in the flux of waveguided luminescence. △ Less

Submitted 5 July, 2013; v1 submitted 4 July, 2013; originally announced July 2013.

Comments: 4 pages, 3 figures