-
Helicity oscillations in Rayleigh-Bénard convection of liquid metal in a cell with aspect ratio 0.5
Authors:
R. Mitra,
F. Stefani,
V. Galindo,
S. Eckert,
M. Sieger,
T. Vogt,
T. Wondrak
Abstract:
In this paper, we present numerical and experimental results on helicity oscillations in a liquid-metal Rayleigh-Bénard (RB) convection cell, with an aspect ratio of 0.5. We find that helicity oscillations occur during transitions of flow states that are characterised by significant changes in the Reynolds number. Moreover, we also observe helicity oscillations at flow conditions where the tempora…
▽ More
In this paper, we present numerical and experimental results on helicity oscillations in a liquid-metal Rayleigh-Bénard (RB) convection cell, with an aspect ratio of 0.5. We find that helicity oscillations occur during transitions of flow states that are characterised by significant changes in the Reynolds number. Moreover, we also observe helicity oscillations at flow conditions where the temporal gradient of the change in the Reynolds number is significantly smaller than that of the helicity. Notably, the helicity oscillations observed during the transient double-roll state exhibit characteristics remarkably similar to those associated with the Tayler Instability.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Current Tomography -- Localization of void fractions in conducting liquids by measuring the induced magnetic flux density
Authors:
L. Krause,
N. Kumar,
T. Wondrak,
S. Gumhold,
S. Eckert,
K. Eckert
Abstract:
A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences i…
▽ More
A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences in electrical conductivity. Through an automated approach, an extensive data set of electric current density and conductivity distributions is generated, complemented with determined magnetic flux densities in the surroundings of the POC cell at virtual sensor positions. The generated data set serves as testing data for various reconstruction approaches. Based on the measurable magnetic flux density, solving Biot-Savarts law inversely is demonstrated and discussed with a model-based solution of an optimization problem, of which the gas bubble locations are derived.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Learning to reconstruct the bubble distribution with conductivity maps using Invertible Neural Networks and Error Diffusion
Authors:
Nishant Kumar,
Lukas Krause,
Thomas Wondrak,
Sven Eckert,
Kerstin Eckert,
Stefan Gumhold
Abstract:
Electrolysis is crucial for eco-friendly hydrogen production, but gas bubbles generated during the process hinder reactions, reduce cell efficiency, and increase energy consumption. Additionally, these gas bubbles cause changes in the conductivity inside the cell, resulting in corresponding variations in the induced magnetic field around the cell. Therefore, measuring these gas bubble-induced magn…
▽ More
Electrolysis is crucial for eco-friendly hydrogen production, but gas bubbles generated during the process hinder reactions, reduce cell efficiency, and increase energy consumption. Additionally, these gas bubbles cause changes in the conductivity inside the cell, resulting in corresponding variations in the induced magnetic field around the cell. Therefore, measuring these gas bubble-induced magnetic field fluctuations using external magnetic sensors and solving the inverse problem of Biot-Savart Law allows for estimating the conductivity in the cell and, thus, bubble size and location. However, determining high-resolution conductivity maps from only a few induced magnetic field measurements is an ill-posed inverse problem. To overcome this, we exploit Invertible Neural Networks (INNs) to reconstruct the conductivity field. Our qualitative results and quantitative evaluation using random error diffusion show that INN achieves far superior performance compared to Tikhonov regularization.
△ Less
Submitted 28 March, 2024; v1 submitted 4 July, 2023;
originally announced July 2023.
-
The Multivariate Extension of the Lomb-Scargle Method
Authors:
Martin Seilmayer,
Ferran Garcia Gonzalez,
Thomas Wondrak
Abstract:
The common methods of spectral analysis for multivariate ($n$-dimensional) time series, like discrete Frourier transform (FT) or Wavelet transform, are based on Fourier series to decompose discrete data into a set of trigonometric model components, e. g. amplitude and phase. Applied to discrete data with a finite range several limitations of (time discrete) FT can be observed which are caused by t…
▽ More
The common methods of spectral analysis for multivariate ($n$-dimensional) time series, like discrete Frourier transform (FT) or Wavelet transform, are based on Fourier series to decompose discrete data into a set of trigonometric model components, e. g. amplitude and phase. Applied to discrete data with a finite range several limitations of (time discrete) FT can be observed which are caused by the orthogonality mismatch of the trigonometric basis functions on a finite interval. However, in the general situation of non-equidistant or fragmented sampling FT based methods will cause significant errors in the parameter estimation. Therefore, the classical Lomb-Scargle method (LSM), which is not based on Fourier series, was developed as a statistical tool for one dimensional data to circumvent the inconsistent and erroneous parameter estimation of FT. The present work deduces LSM for $n$-dimensional data sets by a redefinition of the shifting parameter $τ$, to maintain orthogonality of the trigonometric basis. An analytical derivation shows, that $n$-D LSM extents the traditional 1D case preserving all the statistical benefits, such as the improved noise rejection. Here, we derive the parameter confidence intervals for LSM and compare it with FT. Applications with ideal test data and experimental data will illustrate and support the proposed method.
△ Less
Submitted 24 October, 2022; v1 submitted 28 January, 2020;
originally announced January 2020.
-
Visualization of the global flow structure in a modified Rayleigh-Benard setup using contactless inductive flow tomography
Authors:
Thomas Wondrak,
Josef Pal,
Frank Stefani,
Vladimir Galindo,
Sven Eckert
Abstract:
Rayleigh-Benard convection is not only a classical problem in fluid dynamics but plays also an important role in many metallurgical and crystal growth applications. The measurement of the flow field and of the dynamics of the emerging large-scale circulation in liquid metals is a challenging task due to the opaqueness and the high temperature of the melts. Contactless inductive flow tomography is…
▽ More
Rayleigh-Benard convection is not only a classical problem in fluid dynamics but plays also an important role in many metallurgical and crystal growth applications. The measurement of the flow field and of the dynamics of the emerging large-scale circulation in liquid metals is a challenging task due to the opaqueness and the high temperature of the melts. Contactless inductive flow tomography is a technique to visualize the mean three-dimensional flow structure in liquid metals by measuring the flow induced magnetic field perturbations under the influence of one or several applied magnetic fields. In this paper, we present first measurements of the flow induced magnetic field in a Rayleigh-Benard setup, which are also used to investigate the dynamics of the large-scale circulation. Additionally, we investigate numerically the quality of the reconstruction of the three-dimensional flow field for different sensor configurations.
△ Less
Submitted 16 February, 2017;
originally announced February 2017.
-
Forward and inverse problems in fundamental and applied magnetohydrodynamics
Authors:
Andre Giesecke,
Frank Stefani,
Thomas Wondrak,
Mingtian Xu
Abstract:
This Minireview summarizes the recent efforts to solve forward and inverse problems as they occur in different branches of fundamental and applied magnetohydrodynamics. As for the forward problem, the main focus is on the numerical treatment of induction processes, including self-excitation of magnetic fields in non-spherical domains and/or under the influence of non-homogeneous material parameter…
▽ More
This Minireview summarizes the recent efforts to solve forward and inverse problems as they occur in different branches of fundamental and applied magnetohydrodynamics. As for the forward problem, the main focus is on the numerical treatment of induction processes, including self-excitation of magnetic fields in non-spherical domains and/or under the influence of non-homogeneous material parameters. As an important application of the developed numerical schemes, the functioning of the von-Kármán-sodium (VKS) dynamo experiment is shown to depend crucially on the presence of soft-iron impellers. As for the inverse problem, the main focus is on the mathematical background and some first practical applications of the Contactless Inductive Flow Tomography (CIFT), in which flow induced magnetic field perturbations are utilized for the reconstruction of the velocity field. The promises of CIFT for flow field monitoring in the continuous casting of steel are substantiated by results obtained at a test rig with a low melting liquid metal. While CIFT is presently restricted to flows with low magnetic Reynolds numbers, some selected problems of non-linear inverse dynamo theory, with possible application to geo- and astrophysics, are also discussed.
△ Less
Submitted 14 December, 2012;
originally announced December 2012.
-
Numerical simulation of the Tayler instability in liquid metals
Authors:
Norbert Weber,
Vladimir Galindo,
Frank Stefani,
Tom Weier,
Thomas Wondrak
Abstract:
The electrical current through an incompressible, viscous and resistive liquid conductor produces an azimuthal magnetic field that becomes unstable when the corresponding Hartmann number exceeds a critical value in the order of 20. This Tayler instability, which is not only discussed as a key ingredient of a non-linear stellar dynamo model (Tayler-Spruit dynamo), but also as a limiting factor for…
▽ More
The electrical current through an incompressible, viscous and resistive liquid conductor produces an azimuthal magnetic field that becomes unstable when the corresponding Hartmann number exceeds a critical value in the order of 20. This Tayler instability, which is not only discussed as a key ingredient of a non-linear stellar dynamo model (Tayler-Spruit dynamo), but also as a limiting factor for the maximum size of large liquid metal batteries, was recently observed experimentally in a column of a liquid metal (Seilmayer et al., Phys. Rev. Lett. 108, 244501, 2012}. On the basis of an integro-differential equation approach, we have developed a fully three-dimensional numerical code, and have utilized it for the simulation of the Tayler instability at typical viscosities and resistivities of liquid metals. The resulting growth rates are in good agreement with the experimental data. We illustrate the capabilities of the code for the detailed simulation of liquid metal battery problems in realistic geometries.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
Integral equations in MHD: theory and application
Authors:
Frank Stefani,
Mingtian Xu,
Gunter Gerbeth,
Thomas Wondrak
Abstract:
The induction equation of kinematic magnetohydrodynamics is mathematically equivalent to a system of integral equations for the magnetic field in the bulk of the fluid and for the electric potential at its boundary. We summarize the recent developments concerning the numerical implementation of this scheme and its applications to various forward and inverse problems in dynamo theory and applied MH…
▽ More
The induction equation of kinematic magnetohydrodynamics is mathematically equivalent to a system of integral equations for the magnetic field in the bulk of the fluid and for the electric potential at its boundary. We summarize the recent developments concerning the numerical implementation of this scheme and its applications to various forward and inverse problems in dynamo theory and applied MHD.
△ Less
Submitted 9 November, 2011;
originally announced November 2011.