-
Improvements of readout signal integrity in mid-infrared superconducting nanowire single photon detectors
Authors:
Sahil R. Patel,
Marco Colangelo,
Andrew D. Beyer,
Gregor G. Taylor,
Jason P. Allmaras,
Emma E. Wollman,
Matthew D. Shaw,
Karl K. Berggren,
Boris Korzh
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal as the critical currents become increasingly smaller. We overcome this trade-off with a new device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and getting close to saturation at 10.6 μm. This work provides a novel platform for pushing SNSPD sensitivity to longer wavelengths while improving the scalability of the readout electronics.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 $μ$m
Authors:
Gregor G. Taylor,
Alexander B. Walter,
Boris Korzh,
Bruce Bumble,
Sahil R. Patel,
Jason P. Allmaras,
Andrew D. Beyer,
Roger O'Brient,
Matthew D. Shaw,
Emma E. Wollman
Abstract:
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second.…
▽ More
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low noise and high timing resolution photon counting detection, effectively providing a new class of single-photon sensitive detector for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing and direct dark-matter detection.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared
Authors:
Jamie S. Luskin,
Ekkehart Schmidt,
Boris Korzh,
Andrew D. Beyer,
Bruce Bumble,
Jason P. Allmaras,
Alexander B. Walter,
Emma E. Wollman,
Lautaro Narváez,
Varun B. Verma,
Sae Woo Nam,
Ilya Charaev,
Marco Colangelo,
Karl K. Berggren,
Cristián Peña,
Maria Spiropulu,
Maurice Garcia-Sciveres,
Stephen Derenzo,
Matthew D. Shaw
Abstract:
Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experime…
▽ More
Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
High-speed detection of 1550 nm single photons with superconducting nanowire detectors
Authors:
Ioana Craiciu,
Boris Korzh,
Andrew D. Beyer,
Andrew Mueller,
Jason P. Allmaras,
Lautaro Narváez,
Maria Spiropulu,
Bruce Bumble,
Thomas Lehner,
Emma E. Wollman,
Matthew D. Shaw
Abstract:
Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-cou…
▽ More
Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-counts/s at 3 dB compression. The PEACOQ detector (Performance-Enhanced Array for Counting Optical Quanta) comprises a linear array of 32 straight superconducting niobium nitride nanowires which span the mode of an optical fiber. This design supports high count rates with minimal penalties for detection efficiency and timing jitter. We show how these trade-offs can be mitigated by implementing independent read-out for each nanowire and by using a temporal walk correction technique to reduce count-rate dependent timing jitter. These detectors make quantum communication practical on a 10 GHz clock.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Time-walk and jitter correction in SNSPDs at high count rates
Authors:
Andrew Mueller,
Emma E. Wollman,
Boris Korzh,
Andrew D. Beyer,
Lautaro Narvaez,
Ryan Rogalin,
Maria Spiropulu,
Matthew D. Shaw
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timin…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timing measurements. To compensate for this, we demonstrate a calibration method that correlates delays in detection events with the time elapsed between pulses. The increase in jitter at high rates can be largely canceled in software by applying corrections derived from the calibration process. We demonstrate our method with a single-pixel tungsten silicide SNSPD and show it decreases high count rate jitter. The technique is especially effective at removing a long tail that appears in the instrument response function at high count rates. At a count rate of 11.4 MCounts/s we reduce the full width at one percent maximum level (FW1%M) by 45%. The method therefore enables certain quantum communication protocols that are rate-limited by the (FW1%M) metric to operate almost twice as fast. \c{opyright} 2022. All rights reserved.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories
Authors:
Keshav Kapoor,
Si Xie,
Joaquin Chung,
Raju Valivarthi,
Cristián Peña,
Lautaro Narváez,
Neil Sinclair,
Jason P. Allmaras,
Andrew D. Beyer,
Samantha I. Davis,
Gabriel Fabre,
George Iskander,
Gregory S. Kanter,
Rajkumar Kettimuthu,
Boris Korzh,
Prem Kumar,
Nikolai Lauk,
Andrew Mueller,
Matthew Shaw,
Panagiotis Spentzouris,
Maria Spiropulu,
Jordan M. Thomas,
Emma E. Wollman
Abstract:
We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-t…
▽ More
We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
Picosecond synchronization system for quantum networks
Authors:
Raju Valivarthi,
Lautaro Narváez,
Samantha I. Davis,
Nikolai Lauk,
Cristián Peña,
Si Xie,
Jason P. Allmaras,
Andrew D. Beyer,
Boris Korzh,
Andrew Mueller,
Mandy Rominsky,
Matthew Shaw,
Emma E. Wollman,
Panagiotis Spentzouris,
Daniel Oblak,
Neil Sinclair,
Maria Spiropulu
Abstract:
The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system…
▽ More
The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
Impedance-matched differential superconducting nanowire detectors
Authors:
Marco Colangelo,
Boris Korzh,
Jason P. Allmaras,
Andrew D. Beyer,
Andrew S. Mueller,
Ryan M. Briggs,
Bruce Bumble,
Marcus Runyan,
Martin J. Stevens,
Adam N. McCaughan,
Di Zhu,
Stephen Smith,
Wolfgang Becker,
Lautaro Narváez,
Joshua C. Bienfang,
Simone Frasca,
Angel E. Velasco,
Cristián H. Peña,
Edward E. Ramirez,
Alexander B. Walter,
Ekkehart Schmidt,
Emma E. Wollman,
Maria Spiropulu,
Richard Mirin,
Sae Woo Nam
, et al. (2 additional authors not shown)
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Single-photon detection in the mid-infrared up to 10 micron wavelength using tungsten silicide superconducting nanowire detectors
Authors:
V. B. Verma,
B. Korzh,
A. B. Walter,
A. E. Lita,
R. M. Briggs,
M. Colangelo,
Y. Zhai,
E. E. Wollman,
A. D. Beyer,
J. P. Allmaras,
B. Bumble,
H. Vora,
D. Zhu,
E. Schmidt,
K. K. Berggren,
R. P. Mirin,
S. W. Nam,
M. D. Shaw
Abstract:
We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectros…
▽ More
We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectroscopy.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Teleportation Systems Towards a Quantum Internet
Authors:
Raju Valivarthi,
Samantha Davis,
Cristian Pena,
Si Xie,
Nikolai Lauk,
Lautaro Narvaez,
Jason P. Allmaras,
Andrew D. Beyer,
Yewon Gim,
Meraj Hussein,
George Iskander,
Hyunseong Linus Kim,
Boris Korzh,
Andrew Mueller,
Mandy Rominsky,
Matthew Shaw,
Dawn Tang,
Emma E. Wollman,
Christoph Simon,
Panagiotis Spentzouris,
Neil Sinclair,
Daniel Oblak,
Maria Spiropulu
Abstract:
Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of…
▽ More
Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of >=90% that are consistent with an analytical model of our system, which includes realistic imperfections. To demonstrate the compatibility of our setup with deployed quantum networks, we teleport qubits over 22 km of single-mode fiber while transmitting qubits over an additional 22 km of fiber. Our systems, which are compatible with emerging solid-state quantum devices, provide a realistic foundation for a high-fidelity quantum internet with practical devices.
△ Less
Submitted 28 July, 2020; v1 submitted 21 July, 2020;
originally announced July 2020.
-
Demonstration of a Thermally-Coupled Row-Column SNSPD Imaging Array
Authors:
Jason P. Allmaras,
Emma E. Wollman,
Andrew D. Beyer,
Ryan M. Briggs,
Boris A. Korzh,
Bruce Bumble,
Matthew D. Shaw
Abstract:
While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture…
▽ More
While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture with the channels of one layer oriented in rows and the second layer in columns, we demonstrate imaging capability in 16-pixel arrays with accurate spot tracking at the few photon level. We also explore the performance tradeoffs of orienting the top layer nanowires parallel and perpendicular to the bottom layer. The thermally-coupled row-column scheme is readily able to scale to the kilopixel size with existing readout systems, and when combined with other multiplexing architectures, has the potential to enable megapixel scale SNSPD imaging arrays.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
Readout of Superconducting Nanowire Single Photon Detectors through Forward Biased Optical Modulators
Authors:
Marc de Cea,
Emma E. Wollman,
Amir H. Atabaki,
Dodd J. Gray,
Matthew D. Shaw,
Rajeev J. Ram
Abstract:
Scalable, high speed data transfer between cryogenic (0.1-4 K) and room temperature environments is instrumental in a broad range of fields including quantum computing, superconducting electronics, single photon imaging and space-based communications. A promising approach to overcome the limitations of conventional wire-based readout is the use of optical fiber communication. Optical fiber present…
▽ More
Scalable, high speed data transfer between cryogenic (0.1-4 K) and room temperature environments is instrumental in a broad range of fields including quantum computing, superconducting electronics, single photon imaging and space-based communications. A promising approach to overcome the limitations of conventional wire-based readout is the use of optical fiber communication. Optical fiber presents a 100-1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and is also immune to electromagnetic interference, which allows routing of sensitive signals with improved robustness to noise and crosstalk. Most importantly, optical fibers allow for very high bandwidth densities (in the Tbps/mm$^2$ range) by carrying multiple signals through the same physical fiber (Wavelength Division Multiplexing, WDM). Here, we demonstrate for the first time optical readout of a superconducting nanowire single-photon detector (SNSPD) directly coupled to a CMOS photonic modulator, without the need for an interfacing device. By operating the modulator in the forward bias regime at a temperature of 3.6 K, we achieve very high modulation efficiency (1000-10,000 pm/V) and a low input impedance of 500 $Ω$ with a low power dissipation of 40 $μ$W. This allows us to obtain optical modulation with the low, millivolt-level signal generated by the SNSPD. Optical communication is becoming the preferred I/O solution in modern, room temperature high performance systems, and this work demonstrates its suitability for scalable cryogenic readout, which could help achieve the full potential of superconducting technologies.
△ Less
Submitted 29 January, 2020;
originally announced February 2020.
-
A kilopixel array of superconducting nanowire single-photon detectors
Authors:
Emma E. Wollman,
Varun B. Verma,
Adriana E. Lita,
William H. Farr,
Matthew D. Shaw,
Richard P. Mirin,
Sae Woo Nam
Abstract:
We present a 1024-element imaging array of superconducting nanowire single photon detectors (SNSPDs) using a 32x32 row-column multiplexing architecture. Large arrays are desirable for applications such as imaging, spectroscopy, or particle detection.
We present a 1024-element imaging array of superconducting nanowire single photon detectors (SNSPDs) using a 32x32 row-column multiplexing architecture. Large arrays are desirable for applications such as imaging, spectroscopy, or particle detection.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Determining the depairing current in superconducting nanowire single-photon detectors
Authors:
S. Frasca,
B. Korzh,
M. Colangelo,
D. Zhu,
A. E. Lita,
J. P. Allmaras,
E. E. Wollman,
V. B. Verma,
A. E. Dane,
E. Ramirez,
A. D. Beyer,
S. W. Nam,
A. G. Kozorezov,
M. D. Shaw,
K. K. Berggren
Abstract:
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the resonance frequency of resonator style nanowire coplanar waveguides both in transmission and reflection configurations. Bias current dependent shifts in the measured…
▽ More
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the resonance frequency of resonator style nanowire coplanar waveguides both in transmission and reflection configurations. Bias current dependent shifts in the measured resonant frequency correspond to the change in the kinetic inductance, which can be compared with theoretical predictions. We demonstrate that the fast relaxation model described in the literature accurately matches our experimental data and provides a valuable tool for direct determination of the depairing current. Accurate and direct measurement of the depairing current is critical for nanowire quality analysis, as well as modeling efforts aimed at understanding the detection mechanism in SNSPDs.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
High-Speed Low-Crosstalk Detection of a $^{171}$Yb$^+$ Qubit using Superconducting Nanowire Single Photon Detectors
Authors:
Stephen Crain,
Clinton Cahall,
Geert Vrijsen,
Emma E. Wollman,
Matthew D. Shaw,
Varun B. Verma,
Sae Woo Nam,
Jungsang Kim
Abstract:
Qubits used in quantum computing tend to suffer from errors, either from the qubit interacting with the environment, or from imperfect control when quantum logic gates are applied. Fault-tolerant construction based on quantum error correcting codes (QECC) can be used to recover from such errors. Effective implementation of QECC requires a high fidelity readout of the ancilla qubits from which the…
▽ More
Qubits used in quantum computing tend to suffer from errors, either from the qubit interacting with the environment, or from imperfect control when quantum logic gates are applied. Fault-tolerant construction based on quantum error correcting codes (QECC) can be used to recover from such errors. Effective implementation of QECC requires a high fidelity readout of the ancilla qubits from which the error syndrome can be determined, without affecting the data qubits in which relevant quantum information is stored for processing. Here, we present a detection scheme for \yb trapped ion qubits, where we use superconducting nanowire single photon detectors and utilize photon time-of-arrival statistics to improve the fidelity and speed. Qubit shuttling allows for creating a separate detection region where an ancilla qubit can be measured without disrupting a data qubit. We achieve an average qubit state detection time of 11$μ$s with a fidelity of $99.931(6)\%$. The error due to the detection crosstalk, defined as the probability that the coherence of the data qubit is lost due to the process of detecting an ancilla qubit, is reduced to $\sim2\times10^{-5}$ by creating a separation of 370$μ$m between them.
△ Less
Submitted 19 May, 2019; v1 submitted 11 February, 2019;
originally announced February 2019.
-
Demonstrating sub-3 ps temporal resolution in a superconducting nanowire single-photon detector
Authors:
B. A. Korzh,
Q-Y. Zhao,
S. Frasca,
J. P. Allmaras,
T. M. Autry,
E. A. Bersin,
M. Colangelo,
G. M. Crouch,
A. E. Dane,
T. Gerrits,
F. Marsili,
G. Moody,
E. Ramirez,
J. D. Rezac,
M. J. Stevens,
E. E. Wollman,
D. Zhu,
P. D. Hale,
K. L. Silverman,
R. P. Mirin,
S. W. Nam,
M. D. Shaw,
K. K. Berggren
Abstract:
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs…
▽ More
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the highest efficiency time-resolving single-photon counting detectors available in the near infrared. As the detection mechanism in SNSPDs occurs on picosecond time scales, SNSPDs have been demonstrated with exquisite temporal resolution below 15 ps. We reduce this value to 2.7$\pm$0.2 ps at 400 nm and 4.6$\pm$0.2 ps at 1550 nm, using a specialized niobium nitride (NbN) SNSPD. The observed photon-energy dependence of the temporal resolution and detection latency suggests that intrinsic effects make a significant contribution.
△ Less
Submitted 18 April, 2018;
originally announced April 2018.
-
UV superconducting nanowire single-photon detectors with high efficiency, low noise, and 4 K operating temperature
Authors:
Emma E. Wollman,
Varun B. Verma,
Andrew D. Beyer,
Ryan M. Briggs,
Francesco Marsili,
Jason P. Allmaras,
Adriana E. Lita,
Richard P. Mirin,
Sae Woo Nam,
Matthew D. Shaw
Abstract:
For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for…
▽ More
For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for wavelengths below 400 nm. Here, we describe the design, fabrication, and characterization of UV SNSPDs operating at wavelengths between 250 and 370 nm. The detectors have active areas up to 56 $μ$m in diameter, 70 - 80% efficiency, timing resolution down to 60 ps FWHM, blindness to visible and infrared photons, and dark count rates of ~ 0.25 counts/hr for a 56 $μ$m diameter pixel. By using the amorphous superconductor MoSi, these UV SNSPDs are also able to operate at temperatures up to 4.2 K. These performance metrics make UV SNSPDs ideal for applications in trapped-ion quantum information processing, lidar studies of the upper atmosphere, UV fluorescent-lifetime imaging microscopy, and photon-starved UV astronomy.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
Quantum nondemolition measurement of mechanical squeezed state beyond the 3 dB limit
Authors:
C. U. Lei,
A. J. Weinstein,
J. Suh,
E. E. Wollman,
A. Kronwald,
F. Marquardt,
A. A. Clerk,
K. C. Schwab
Abstract:
We use a reservoir engineering technique based on two-tone driving to generate and stabilize a quantum squeezed state of a micron-scale mechanical oscillator in a microwave optomechanical system. Using an independent backaction evading measurement to directly quantify the squeezing, we observe $4.7\pm0.9$ dB of squeezing below the zero-point level, surpassing the 3 dB limit of standard parametric…
▽ More
We use a reservoir engineering technique based on two-tone driving to generate and stabilize a quantum squeezed state of a micron-scale mechanical oscillator in a microwave optomechanical system. Using an independent backaction evading measurement to directly quantify the squeezing, we observe $4.7\pm0.9$ dB of squeezing below the zero-point level, surpassing the 3 dB limit of standard parametric squeezing techniques. Our measurements also reveal evidence for an additional mechanical parametric effect. The interplay between this effect and the optomechanical interaction enhances the amount of squeezing obtained in the experiment.
△ Less
Submitted 26 May, 2016; v1 submitted 26 May, 2016;
originally announced May 2016.
-
Quantum squeezing of motion in a mechanical resonator
Authors:
E. E. Wollman,
C. U. Lei,
A. J. Weinstein,
J. Suh,
A. Kronwald,
F. Marquardt,
A. A. Clerk,
K. C. Schwab
Abstract:
As a result of the quantum, wave-like nature of the physical world, a harmonic oscillator can never be completely at rest. Even in the quantum ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. In this work, using microwave frequency radiation pressure, we both prepare a micron-scale…
▽ More
As a result of the quantum, wave-like nature of the physical world, a harmonic oscillator can never be completely at rest. Even in the quantum ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. In this work, using microwave frequency radiation pressure, we both prepare a micron-scale mechanical system in a state near the quantum ground state and then manipulate its thermal fluctuations to produce a stationary, quadrature-squeezed state. We deduce that the variance of one motional quadrature is 0.80 times the zero-point level, or 1 dB of sub-zero-point squeezing. This work is relevant to the quantum engineering of states of matter at large length scales, the study of decoherence of large quantum systems, and for the realization of ultra-sensitive sensing of force and motion.
△ Less
Submitted 6 July, 2015;
originally announced July 2015.
-
Observation and interpretation of motional sideband asymmetry in a quantum electro-mechanical device
Authors:
A. J. Weinstein,
C. U. Lei,
E. E. Wollman,
J. Suh,
A. Metelmann,
A. A. Clerk,
K. C. Schwab
Abstract:
Quantum electro-mechanical systems offer a unique opportunity to probe quantum noise properties in macroscopic devices, properties which ultimately stem from the Heisenberg Uncertainty Principle. A simple example of this is expected to occur in a microwave parametric transducer, where mechanical motion generates motional sidebands corresponding to the up and down frequency-conversion of microwave…
▽ More
Quantum electro-mechanical systems offer a unique opportunity to probe quantum noise properties in macroscopic devices, properties which ultimately stem from the Heisenberg Uncertainty Principle. A simple example of this is expected to occur in a microwave parametric transducer, where mechanical motion generates motional sidebands corresponding to the up and down frequency-conversion of microwave photons. Due to quantum vacuum noise, the rates of these processes are expected to be unequal. We measure this fundamental imbalance in a microwave transducer coupled to a radio-frequency mechanical mode, cooled near the ground state of motion. We also discuss the subtle origin of this imbalance: depending on the measurement scheme, the imbalance is most naturally attributed to the quantum fluctuations of either the mechanical mode or of the electromagnetic field.
△ Less
Submitted 11 April, 2014;
originally announced April 2014.
-
Measuring mass-loss rates and constraining shock physics using X-ray line profiles of O stars from the Chandra archive
Authors:
David H. Cohen,
Emma E. Wollman,
Maurice A. Leutenegger,
Jon O. Sundqvist,
Alex W. Fullerton,
Janos Zsargo,
Stanley P. Owocki
Abstract:
We quantitatively investigate the extent of wind absorption signatures in the X-ray grating spectra of all non-magnetic, effectively single O stars in the Chandra archive via line profile fitting. Under the usual assumption of a spherically symmetric wind with embedded shocks, we confirm previous claims that some objects show little or no wind absorption. However, many other objects do show asymme…
▽ More
We quantitatively investigate the extent of wind absorption signatures in the X-ray grating spectra of all non-magnetic, effectively single O stars in the Chandra archive via line profile fitting. Under the usual assumption of a spherically symmetric wind with embedded shocks, we confirm previous claims that some objects show little or no wind absorption. However, many other objects do show asymmetric and blue shifted line profiles, indicative of wind absorption. For these stars, we are able to derive wind mass-loss rates from the ensemble of line profiles, and find values lower by an average factor of 3 than those predicted by current theoretical models, and consistent with H-alpha if clum** factors of f_cl ~ 20 are assumed. The same profile fitting indicates an onset radius of X-rays typically at r ~ 1.5 R_star, and terminal velocities for the X-ray emitting wind component that are consistent with that of the bulk wind. We explore the likelihood that the stars in the sample that do not show significant wind absorption signatures in their line profiles have at least some X-ray emission that arises from colliding wind shocks with a close binary companion. The one clear exception is zeta Oph, a weak-wind star that appears to simply have a very low mass-loss rate. We also reanalyse the results from the canonical O supergiant zeta Pup, using a solar-metallicity wind opacity model and find Mdot = 1.8 \times 10^{-6} M_sun/yr, consistent with recent multi-wavelength determinations.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Mechanically Detecting and Avoiding the Quantum Fluctuations of a Microwave Field
Authors:
J. Suh,
A. J. Weinstein,
C. U. Lei,
E. E. Wollman,
S. K. Steinke,
P. Meystre,
A. A. Clerk,
K. C. Schwab
Abstract:
During the theoretical investigation of the ultimate sensitivity of gravitational wave detectors through the 1970's and '80's, it was debated whether quantum fluctuations of the light field used for detection, also known as photon shot noise, would ultimately produce a force noise which would disturb the detector and limit the sensitivity. Carlton Caves famously answered this question with "They d…
▽ More
During the theoretical investigation of the ultimate sensitivity of gravitational wave detectors through the 1970's and '80's, it was debated whether quantum fluctuations of the light field used for detection, also known as photon shot noise, would ultimately produce a force noise which would disturb the detector and limit the sensitivity. Carlton Caves famously answered this question with "They do." With this understanding came ideas how to avoid this limitation by giving up complete knowledge of the detector's motion. In these back-action evading (BAE) or quantum non-demolition (QND) schemes, one manipulates the required quantum measurement back-action by placing it into a component of the motion which is unobserved and dynamically isolated. Using a superconducting, electro-mechanical device, we realize a sensitive measurement of a single motional quadrature with imprecision below the zero-point fluctuations of motion, detect both the classical and quantum measurement back-action, and demonstrate BAE avoiding the quantum back-action from the microwave photons by 9 dB. Further improvements of these techniques are expected to provide a practical route to manipulate and prepare a squeezed state of motion with mechanical fluctuations below the quantum zero-point level, which is of interest both fundamentally and for the detection of very weak forces.
△ Less
Submitted 14 December, 2013;
originally announced December 2013.
-
Measurement of the electronic thermal conductance channels and heat capacity of graphene at low temperature
Authors:
K. C. Fong,
Emma Wollman,
Harish Ravi,
Wei Chen,
Aash Clerk,
M. D. Shaw,
H. G. LeDuc,
K. C. Schwab
Abstract:
The ability to transport energy is a fundamental property of the two-dimensional Dirac fermions in graphene. Electronic thermal transport in this system is relatively unexplored and is expected to show unique fundamental properties and to play an important role in future applications of graphene, including opto-electronics, plasmonics, and ultra-sensitive bolometry. Here we present measurements of…
▽ More
The ability to transport energy is a fundamental property of the two-dimensional Dirac fermions in graphene. Electronic thermal transport in this system is relatively unexplored and is expected to show unique fundamental properties and to play an important role in future applications of graphene, including opto-electronics, plasmonics, and ultra-sensitive bolometry. Here we present measurements of bipolar, electron-diffusion and electron-phonon thermal conductances, and infer the electronic specific heat, with a minimum value of 10 $k_{\rm{B}}$ ($10^{-22}$ JK$^{-1}$) per square micron. We test the validity of the Wiedemann-Franz law and find the Lorenz number equals $1.32\times(π^2/3)(k_{\rm{B}}/e)^2$. The electron-phonon thermal conductance has a temperature power law $T^2$ at high do** levels, and the coupling parameter is consistent with recent theory, indicating its enhancement by impurity scattering. We demonstrate control of the thermal conductance by electrical gating and by suppressing the diffusion channel using superconducting electrodes, which sets the stage for future graphene-based single microwave photon detection.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Chandra X-ray spectroscopy of the very early O supergiant HD 93129A: constraints on wind shocks and the mass-loss rate
Authors:
David H. Cohen,
Marc Gagné,
Maurice A. Leutenegger,
James P. MacArthur,
Emma E. Wollman,
Jon O. Sundqvist,
Alex W. Fullerton,
Stanley P. Owocki
Abstract:
We present analysis of both the resolved X-ray emission line profiles and the broadband X-ray spectrum of the O2 If* star HD 93129A, measured with the Chandra HETGS. This star is among the earliest and most massive stars in the Galaxy, and provides a test of the embedded wind shock scenario in a very dense and powerful wind. A major new result is that continuum absorption by the dense wind is the…
▽ More
We present analysis of both the resolved X-ray emission line profiles and the broadband X-ray spectrum of the O2 If* star HD 93129A, measured with the Chandra HETGS. This star is among the earliest and most massive stars in the Galaxy, and provides a test of the embedded wind shock scenario in a very dense and powerful wind. A major new result is that continuum absorption by the dense wind is the primary cause of the hardness of the observed X-ray spectrum, while intrinsically hard emission from colliding wind shocks contributes less than 10% of the X-ray flux. We find results consistent with the predictions of numerical simulations of the line-driving instability, including line broadening indicating an onset radius of X-ray emission of several tenths Rstar. Helium-like forbidden-to-intercombination line ratios are consistent with this onset radius, and inconsistent with being formed in a wind-collision interface with the star's closest visual companion at a distance of ~100 AU. The broadband X-ray spectrum is fit with a dominant emission temperature of just kT = 0.6 keV along with significant wind absorption. The broadband wind absorption and the line profiles provide two independent measurements of the wind mass-loss rate: Mdot = 5.2_{-1.5}^{+1.8} \times 10^{-6} Msun/yr and Mdot = 6.8_{-2.2}^{+2.8} \times 10^{-6} Msun/yr, respectively. This is the first consistent modeling of the X-ray line profile shapes and broadband X-ray spectral energy distribution in a massive star, and represents a reduction of a factor of 3 to 4 compared to the standard H-alpha mass-loss rate that assumes a smooth wind.
△ Less
Submitted 25 April, 2011;
originally announced April 2011.
-
X-ray spectral diagnostics of activity in massive stars
Authors:
David H. Cohen,
Emma E. Wollman,
Maurice A. Leutenegger
Abstract:
X-rays give direct evidence of instabilities, time-variable structure, and shock heating in the winds of O stars. The observed broad X-ray emission lines provide information about the kinematics of shock-heated wind plasma, enabling us to test wind-shock models. And their shapes provide information about wind absorption, and thus about the wind mass-loss rates. Mass-loss rates determined from X-ra…
▽ More
X-rays give direct evidence of instabilities, time-variable structure, and shock heating in the winds of O stars. The observed broad X-ray emission lines provide information about the kinematics of shock-heated wind plasma, enabling us to test wind-shock models. And their shapes provide information about wind absorption, and thus about the wind mass-loss rates. Mass-loss rates determined from X-ray line profiles are not sensitive to density-squared clum** effects, and indicate mass-loss rate reductions of factors of 3 to 6 over traditional diagnostics that suffer from density-squared effects. Broad-band X-ray spectral energy distributions also provide mass-loss rate information via soft X-ray absorption signatures. In some cases, the degree of wind absorption is so high that the hardening of the X-ray SED can be quite significant. We discuss these results as applied to the early O stars zeta Pup (O4 If), 9 Sgr (O4 V((f))), and HD 93129A (O2 If*).
△ Less
Submitted 28 September, 2010;
originally announced September 2010.
-
A mass-loss rate determination for zeta Puppis from the quantitative analysis of X-ray emission line profiles
Authors:
David H. Cohen,
Maurice A. Leutenegger,
Emma E. Wollman,
Janos Zsargó,
D. John Hillier,
Richard H. D. Townsend,
Stanley P. Owocki
Abstract:
We fit every emission line in the high-resolution Chandra grating spectrum of zeta Pup with an empirical line profile model that accounts for the effects of Doppler broadening and attenuation by the bulk wind. For each of sixteen lines or line complexes that can be reliably measured, we determine a best-fitting fiducial optical depth, tau_* = kappa*Mdot/4{pi}R_{\ast}v_{\infty}, and place confide…
▽ More
We fit every emission line in the high-resolution Chandra grating spectrum of zeta Pup with an empirical line profile model that accounts for the effects of Doppler broadening and attenuation by the bulk wind. For each of sixteen lines or line complexes that can be reliably measured, we determine a best-fitting fiducial optical depth, tau_* = kappa*Mdot/4{pi}R_{\ast}v_{\infty}, and place confidence limits on this parameter. These sixteen lines include seven that have not previously been reported on in the literature. The extended wavelength range of these lines allows us to infer, for the first time, a clear increase in tau_* with line wavelength, as expected from the wavelength increase of bound-free absorption opacity. The small overall values of tau_*, reflected in the rather modest asymmetry in the line profiles, can moreover all be fit simultaneously by simply assuming a moderate mass-loss rate of 3.5 \pm 0.3 \times 10^{-6} Msun/yr, without any need to invoke porosity effects in the wind. The quoted uncertainty is statistical, but the largest source of uncertainty in the derived mass-loss rate is due to the uncertainty in the elemental abundances of zeta Pup, which affects the continuum opacity of the wind, and which we estimate to be a factor of two. Even so, the mass-loss rate we find is significantly below the most recent smooth-wind H-alpha mass-loss rate determinations for zeta Pup, but is in line with newer determinations that account for small-scale wind clum**. If zeta Pup is representative of other massive stars, these results will have important implications for stellar and galactic evolution.
△ Less
Submitted 3 March, 2010;
originally announced March 2010.