-
A note on weak conjugacy for homeomorphisms of surfaces
Authors:
Frédéric Le Roux,
Alejandro Passeggi,
Martin Sambarino,
Maxime Wolff
Abstract:
We explore the relation of weak conjugacy in the group of homeomorphisms isotopic to the identity, for surfaces.
We explore the relation of weak conjugacy in the group of homeomorphisms isotopic to the identity, for surfaces.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
A More Precise Measurement of the Radius of PSR J0740+6620 Using Updated NICER Data
Authors:
Alexander J. Dittmann,
M. Coleman Miller,
Frederick K. Lamb,
Isiah Holt,
Cecilia Chirenti,
Michael T. Wolff,
Slavko Bogdanov,
Sebastien Guillot,
Wynn C. G. Ho,
Sharon M. Morsink,
Zaven Arzoumanian,
Keith C. Gendreau
Abstract:
PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be $2.08\pm0.07\,\rm M_\odot$. Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. (2021) and Riley et al. (2021) reported measurements of the radius of PSR J0740+662…
▽ More
PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be $2.08\pm0.07\,\rm M_\odot$. Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. (2021) and Riley et al. (2021) reported measurements of the radius of PSR J0740+6620 based on Neutron Star Interior Composition Explorer (NICER) observations accumulated through 17 April 2020, and an exploratory analysis utilizing NICER background estimates and a data set accumulated through 28 December 2021 was presented in Salmi et al. (2022). Here we report an updated radius measurement, derived by fitting models of X-ray emission from the neutron star surface to NICER data accumulated through 21 April 2022, totaling $\sim1.1$ Ms additional exposure compared to the data set analyzed in Miller et al. (2021) and Riley et al. (2021), and to data from X-ray Multi-Mirror (XMM-Newton) observations. We find that the equatorial circumferential radius of PSR J0740+6620 is $12.92_{-1.13}^{+2.09}$ km (68% credibility), a fractional uncertainty $\sim83\%$ the width of that reported in Miller et al. (2021), in line with statistical expectations given the additional data. If we were to require the radius to be less than 16 km, as was done in Salmi et al. (2024), then our 68% credible region would become $R=12.76^{+1.49}_{-1.02}$ km, which is close to the headline result of Salmi et al. (2024). Our updated measurements, along with other laboratory and astrophysical constraints, imply a slightly softer equation of state than that inferred from our previous measurements.
△ Less
Submitted 30 June, 2024; v1 submitted 20 June, 2024;
originally announced June 2024.
-
The Radius of the High Mass Pulsar PSR J0740+6620 With 3.6 Years of NICER Data
Authors:
Tuomo Salmi,
Devarshi Choudhury,
Yves Kini,
Thomas E. Riley,
Serena Vinciguerra,
Anna L. Watts,
Michael T. Wolff,
Zaven Arzoumanian,
Slavko Bogdanov,
Deepto Chakrabarty,
Keith Gendreau,
Sebastien Guillot,
Wynn C. G. Ho,
Daniela Huppenkothen,
Renee M. Ludlam,
Sharon M. Morsink,
Paul S. Ray
Abstract:
We report an updated analysis of the radius, mass, and heated surface regions of the massive pulsar PSR J0740+6620 using NICER data from 2018 September 21 to 2022 April 21, a substantial increase in data set size compared to previous analyses. Using a tight mass prior from radio timing measurements and jointly modeling the new NICER data with XMM-Newton data, the inferred equatorial radius and gra…
▽ More
We report an updated analysis of the radius, mass, and heated surface regions of the massive pulsar PSR J0740+6620 using NICER data from 2018 September 21 to 2022 April 21, a substantial increase in data set size compared to previous analyses. Using a tight mass prior from radio timing measurements and jointly modeling the new NICER data with XMM-Newton data, the inferred equatorial radius and gravitational mass are $12.49_{-0.88}^{+1.28}$ km and $2.073_{-0.069}^{+0.069}$ $M_\odot$ respectively, each reported as the posterior credible interval bounded by the $16\,\%$ and $84\,\%$ quantiles, with an estimated systematic error $\lesssim 0.1$ km. This result was obtained using the best computationally feasible sampler settings providing a strong radius lower limit but a slightly more uncertain radius upper limit. The inferred radius interval is also close to the $R=12.76_{-1.02}^{+1.49}$ km obtained by Dittmann et al. 2024, when they require the radius to be less than $16$ km as we do. The results continue to disfavor very soft equations of state for dense matter, with $R<11.15$ km for this high mass pulsar excluded at the $95\,\%$ probability. The results do not depend significantly on the assumed cross-calibration uncertainty between NICER and XMM-Newton. Using simulated data that resemble the actual observations, we also show that our pipeline is capable of recovering parameters for the inferred models reported in this paper.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
The giant outburst of EXO 2030+375 II: Broadband spectroscopy and evolution
Authors:
R. Ballhausen,
P. Thalhammer,
P. Pradhan,
E. Sokolova-Lapa,
J. Stierhof,
K. Pottschmidt,
J. Wilms,
J. B. Coley,
P. Kretschmar,
F. Fuerst,
P. Becker,
B. West,
C. Malacaria,
M. T. Wolff,
R. Rothschild,
R. Staubert
Abstract:
In 2021, the high-mass X-ray binary EXO 2030+375 underwent a giant X-ray outburst, the first since 2006, that reached a peak flux of ${\sim}600\,\mathrm{mCrab}$ (3-50\,keV). The goal of this work is to study the spectral evolution over the course of the outburst, search for possible cyclotron resonance scattering features (CRSFs), and to associate spectral components with the emission pattern of t…
▽ More
In 2021, the high-mass X-ray binary EXO 2030+375 underwent a giant X-ray outburst, the first since 2006, that reached a peak flux of ${\sim}600\,\mathrm{mCrab}$ (3-50\,keV). The goal of this work is to study the spectral evolution over the course of the outburst, search for possible cyclotron resonance scattering features (CRSFs), and to associate spectral components with the emission pattern of the accretion column. We used broadband spectra taken with the Nuclear Spectroscopic Telescope Array (NuSTAR), the Neutron Star Interior Composition Explorer (NICER), and Chandra near the peak and during the decline phase of the outburst. We describe the data with established empirical continuum models and perform pulse-phase-resolved spectroscopy. We compare the spectral evolution with pulse phase using a proposed geometrical emission model. We find a significant spectral hardening toward lower luminosity, a behavior that is expected for super-critical sources. The continuum shape and evolution cannot be described by a simple power-law model with exponential cutoff; it requires additional absorption or emission components. We can confirm the presence of a narrow absorption feature at ${\sim}10\,\mathrm{keV}$ in both NuSTAR observations. The absence of harmonics puts into question the interpretation of this feature as a CRSF. The empirical spectral components cannot be directly associated with identified emission components from the accretion column.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
GluPredKit: Development and User Evaluation of a Standardization Software for Blood Glucose Prediction
Authors:
Miriam K. Wolff,
Sam Royston,
Anders Lyngvi Fougner,
Hans Georg Schaathun,
Martin Steinert,
Rune Volden
Abstract:
Blood glucose prediction is an important component of biomedical technology for managing diabetes with automated insulin delivery systems. Machine learning and deep learning algorithms hold the potential to advance this technology. However, the lack of standardized methodologies impedes direct comparisons of emerging algorithms. This study addresses this challenge by develo** GluPredKit, a softw…
▽ More
Blood glucose prediction is an important component of biomedical technology for managing diabetes with automated insulin delivery systems. Machine learning and deep learning algorithms hold the potential to advance this technology. However, the lack of standardized methodologies impedes direct comparisons of emerging algorithms. This study addresses this challenge by develo** GluPredKit, a software platform designed to standardize the training, testing, and comparison of blood glucose prediction algorithms. GluPredKit features a modular, open-source architecture, complemented by a command-line interface, comprehensive documentation, and a video tutorial to enhance usability. To ensure the platform's effectiveness and user-friendliness, we conducted preliminary testing and a user study. In this study, four participants interacted with GluPredKit and provided feedback through the System Usability Scale (SUS) and open-ended questions. The findings indicate that GluPredKit effectively addresses the standardization challenge and offers high usability, facilitating direct comparisons between different algorithms. Additionally, it serves an educational purpose by making advanced methodologies more accessible. Future directions include continuously enhancing the software based on user feedback. We also invite community contributions to further expand GluPredKit with state-of-the-art components and foster a collaborative effort in standardizing blood glucose prediction research, leading to more comparable studies.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Exploring Waveform Variations among Neutron Star Ray-tracing Codes for Complex Emission Geometries
Authors:
Devarshi Choudhury,
Anna L. Watts,
Alexander J. Dittmann,
M. Coleman Miller,
Sharon M. Morsink,
Tuomo Salmi,
Serena Vinciguerra,
Slavko Bogdanov,
Sebastien Guillot,
Michael T. Wolff,
Zaven Arzoumanian
Abstract:
Pulse Profile Modeling (PPM), the technique used to infer mass, radius and geometric parameters for rotation-powered millisecond pulsars using data from the Neutron Star Interior Composition Explorer (NICER), relies on relativistic ray-tracing of thermal X-ray photons from hot spots on the neutron star surface to the observer. To verify our ray-tracing codes we have in the past conducted cross-tes…
▽ More
Pulse Profile Modeling (PPM), the technique used to infer mass, radius and geometric parameters for rotation-powered millisecond pulsars using data from the Neutron Star Interior Composition Explorer (NICER), relies on relativistic ray-tracing of thermal X-ray photons from hot spots on the neutron star surface to the observer. To verify our ray-tracing codes we have in the past conducted cross-tests for simple hot spot geometries, focusing primarily on the implementation of the space-time model. In this paper, we present verification for test problems that explore the more complex hot spot geometries that are now being employed in the NICER PPM analyses. We conclude that the accuracy of our computed waveforms is in general sufficiently high for analyses of current NICER data sets. We have however identified some extreme configurations where extra care may be needed.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
NICER Discovery that SRGA J144459.2-604207 is an Accreting Millisecond X-ray Pulsar
Authors:
Mason Ng,
Paul S. Ray,
Andrea Sanna,
Tod E. Strohmayer,
Alessandro Papitto,
Giulia Illiano,
Arianna C. Albayati,
Diego Altamirano,
Tuğba Boztepe,
Tolga Güver,
Deepto Chakrabarty,
Zaven Arzoumanian,
D. J. K. Buisson,
Elizabeth C. Ferrara,
Keith C. Gendreau,
Sebastien Guillot,
Jeremy Hare,
Gaurava K. Jaisawal,
Christian Malacaria,
Michael T. Wolff
Abstract:
We present the discovery, with the Neutron Star Interior Composition Explorer (NICER), that SRGA J144459.2-604207 is a 447.9 Hz accreting millisecond X-ray pulsar (AMXP), which underwent a four-week long outburst starting on 2024 February 15. The AMXP resides in a 5.22 hr binary, orbiting a low-mass companion donor with $M_d>0.1M_\odot$. We report on the temporal and spectral properties from NICER…
▽ More
We present the discovery, with the Neutron Star Interior Composition Explorer (NICER), that SRGA J144459.2-604207 is a 447.9 Hz accreting millisecond X-ray pulsar (AMXP), which underwent a four-week long outburst starting on 2024 February 15. The AMXP resides in a 5.22 hr binary, orbiting a low-mass companion donor with $M_d>0.1M_\odot$. We report on the temporal and spectral properties from NICER observations during the early days of the outburst, from 2024 February 21 through 2024 February 23, during which NICER also detected a type-I X-ray burst that exhibited a plateau lasting ~6 s. The spectra of the persistent emission were well described by an absorbed thermal blackbody and power-law model, with blackbody temperature $kT\approx0.9{\rm\,keV}$ and power-law photon index $Γ\approx1.9$. Time-resolved burst spectroscopy confirmed the thermonuclear nature of the burst, where an additional blackbody component reached a maximum temperature of nearly $kT\approx3{\rm\,keV}$ at the peak of the burst. We discuss the nature of the companion as well as the type-I X-ray burst.
△ Less
Submitted 14 May, 2024; v1 submitted 30 April, 2024;
originally announced May 2024.
-
On the impact of the vertical structure of Martian water ice clouds on nadir atmospheric retrievals from simultaneous EMM/EXI and TGO/ACS-MIR observations
Authors:
Aurélien Stcherbinine,
Michael J. Wolff,
Christopher S. Edwards,
Oleg Korablev,
Anna Fedorova,
Alexander Trokhimovskiy
Abstract:
Retrieving the optical depth of the Martian clouds ($τ_\mathrm{cld}$) is a powerful way to monitor their spatial and temporal evolution. However, such retrievals from nadir imagery rely on several assumptions, including the vertical structure of the clouds in the atmosphere. Here we compare the results of cloud optical depth retrievals from the Emirates eXploration Imager (EXI) onboard the Emirate…
▽ More
Retrieving the optical depth of the Martian clouds ($τ_\mathrm{cld}$) is a powerful way to monitor their spatial and temporal evolution. However, such retrievals from nadir imagery rely on several assumptions, including the vertical structure of the clouds in the atmosphere. Here we compare the results of cloud optical depth retrievals from the Emirates eXploration Imager (EXI) onboard the Emirates Mars Mission (EMM) "Hope" orbiter performed using an empirical cloud profile (typically used in similar studies) and using derived cloud profiles obtained from near-simultaneous Solar Occultation observations from the Middle-Infrared channel of the Atmospheric Chemistry Suite (ACS) instrument onboard the ESA Trace Gas Orbiter (TGO). We show that the latitudinal dependence of the cloud vertical profiles can have a strong impact on the nadir retrievals; neglecting it can lead to a significant underestimation of $τ_\mathrm{cld}$ in the polar regions (up to 25 %). We also discuss the impact of a vertically-dependent particle size profile, as previous studies have shown the presence of very small water ice particles at the top of the clouds. From this analysis, we provide recommendations for the improvement of water ice cloud parameterization in radiative transfer algorithms in nadir atmospheric retrievals.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Cohere3D: Exploiting Temporal Coherence for Unsupervised Representation Learning of Vision-based Autonomous Driving
Authors:
Yichen Xie,
Hongge Chen,
Gregory P. Meyer,
Yong Jae Lee,
Eric M. Wolff,
Masayoshi Tomizuka,
Wei Zhan,
Yuning Chai,
Xin Huang
Abstract:
Due to the lack of depth cues in images, multi-frame inputs are important for the success of vision-based perception, prediction, and planning in autonomous driving. Observations from different angles enable the recovery of 3D object states from 2D image inputs if we can identify the same instance in different input frames. However, the dynamic nature of autonomous driving scenes leads to signific…
▽ More
Due to the lack of depth cues in images, multi-frame inputs are important for the success of vision-based perception, prediction, and planning in autonomous driving. Observations from different angles enable the recovery of 3D object states from 2D image inputs if we can identify the same instance in different input frames. However, the dynamic nature of autonomous driving scenes leads to significant changes in the appearance and shape of each instance captured by the camera at different time steps. To this end, we propose a novel contrastive learning algorithm, Cohere3D, to learn coherent instance representations in a long-term input sequence robust to the change in distance and perspective. The learned representation aids in instance-level correspondence across multiple input frames in downstream tasks. In the pretraining stage, the raw point clouds from LiDAR sensors are utilized to construct the long-term temporal correspondence for each instance, which serves as guidance for the extraction of instance-level representation from the vision-based bird's eye-view (BEV) feature map. Cohere3D encourages a consistent representation for the same instance at different frames but distinguishes between representations of different instances. We evaluate our algorithm by finetuning the pretrained model on various downstream perception, prediction, and planning tasks. Results show a notable improvement in both data efficiency and task performance.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
A 350-MHz Green Bank Telescope Survey of Unassociated Fermi LAT Sources: Discovery and Timing of Ten Millisecond Pulsars
Authors:
P. Bangale,
B. Bhattacharyya,
F. Camilo,
C. J. Clark,
I. Cognard,
M. E. DeCesar,
E. C. Ferrara,
P. Gentile,
L. Guillemot,
J. W. T. Hessels,
T. J. Johnson,
M. Kerr,
M. A. McLaughlin,
L. Nieder,
S. M. Ransom,
P. S. Ray,
M. S. E. Roberts,
J. Roy,
S. Sanpa-Arsa,
G. Theureau,
M. T. Wolff
Abstract:
We have searched for radio pulsations towards 49 Fermi Large Area Telescope (LAT) 1FGL Catalog $γ$-ray sources using the Green Bank Telescope at 350 MHz. We detected 18 millisecond pulsars (MSPs) in blind searches of the data; 10 of these were discoveries unique to our survey. Sixteen are binaries, with eight having short orbital periods $P_B < 1$ day. No radio pulsations from young pulsars were d…
▽ More
We have searched for radio pulsations towards 49 Fermi Large Area Telescope (LAT) 1FGL Catalog $γ$-ray sources using the Green Bank Telescope at 350 MHz. We detected 18 millisecond pulsars (MSPs) in blind searches of the data; 10 of these were discoveries unique to our survey. Sixteen are binaries, with eight having short orbital periods $P_B < 1$ day. No radio pulsations from young pulsars were detected, although three targets are coincident with apparently radio-quiet $γ$-ray pulsars discovered in LAT data. Here, we give an overview of the survey and present radio and $γ$-ray timing results for the 10 MSPs discovered. These include the only isolated MSP discovered in our survey and six short-$P_B$ binary MSPs. Of these, three have very low-mass companions ($M_c$ $\ll$ 0.1M$_{\odot}$) and hence belong to the class of black widow pulsars. Two have more massive, non-degenerate companions with extensive radio eclipses and orbitally modulated X-ray emission consistent with the redback class. Significant $γ$-ray pulsations have been detected from nine of the discoveries. This survey and similar efforts suggest that the majority of Galactic $γ$-ray sources at high Galactic latitudes are either MSPs or relatively nearby non-recycled pulsars, with the latter having on average a much smaller radio/$γ$-ray beaming ratio as compared to MSPs. It also confirms that past surveys suffered from an observational bias against finding short-$P_B$ MSP systems.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
Gaussian Process-Based Nonlinear Moving Horizon Estimation
Authors:
Tobias M. Wolff,
Victor G. Lopez,
Matthias A. Müller
Abstract:
In this paper, we propose a novel Gaussian process-based moving horizon estimation (MHE) framework for unknown nonlinear systems. In the proposed scheme, we take advantage of the properties of Gaussian processes. On the one hand, we approximate the system dynamics by the posterior means of the learned Gaussian processes (GPs). On the other hand, we exploit the posterior variances of the Gaussian p…
▽ More
In this paper, we propose a novel Gaussian process-based moving horizon estimation (MHE) framework for unknown nonlinear systems. In the proposed scheme, we take advantage of the properties of Gaussian processes. On the one hand, we approximate the system dynamics by the posterior means of the learned Gaussian processes (GPs). On the other hand, we exploit the posterior variances of the Gaussian processes to design the weighting matrices in the MHE cost function and account for the uncertainty in the learned system dynamics. The data collection and the tuning of the hyperparameters are done offline. We prove robust stability of the GP-based MHE scheme using a Lyapunov-based proof technique. Furthermore, as additional contribution, we analyze under which conditions incremental input/output-to-state stability (a nonlinear detectability notion) is preserved when approximating the system dynamics using, e.g., machine learning techniques. Finally, we illustrate the performance of the GP-based MHE scheme in a simulation case study and show how the chosen weighting matrices can lead to an improved performance compared to standard cost functions.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Mars 2020 Perseverance rover studies of the Martian atmosphere over Jezero from pressure measurements
Authors:
A. Sánchez-Lavega,
T. del Rio-Gaztelurrutia,
R. Hueso,
M. de la Torre Juárez,
G. M. Martínez,
A. -M. Harri,
M. Genzer,
M. Hieta,
J. Polkko,
J. A. Rodríguez-Manfredi,
M. T. Lemmon,
J. Pla-García,
D. Toledo,
A. Vicente-Retortillo,
Daniel Viúdez-Moreiras,
A. Munguira,
L. K. Tamppari,
C. Newman,
J. Gómez-Elvira,
S. Guzewich,
T. Bertrand,
V. Apéstigue,
I. Arruego,
M. Wolff,
D. Banfield
, et al. (2 additional authors not shown)
Abstract:
The pressure sensors on Mars rover Perseverance measure the pressure field in the Jezero crater on regular hourly basis starting in sol 15 after landing. The present study extends up to sol 460 encompassing the range of solar longitudes from Ls 13° - 241° (Martian Year (MY) 36). The data show the changing daily pressure cycle, the sol-to-sol seasonal evolution of the mean pressure field driven by…
▽ More
The pressure sensors on Mars rover Perseverance measure the pressure field in the Jezero crater on regular hourly basis starting in sol 15 after landing. The present study extends up to sol 460 encompassing the range of solar longitudes from Ls 13° - 241° (Martian Year (MY) 36). The data show the changing daily pressure cycle, the sol-to-sol seasonal evolution of the mean pressure field driven by the CO2 sublimation and deposition cycle at the poles, the characterization of up to six components of the atmospheric tides and their relationship to dust content in the atmosphere. They also show the presence of wave disturbances with periods 2-5 sols, exploring their baroclinic nature, short period oscillations (mainly at night-time) in the range 8-24 minutes that we interpret as internal gravity waves, transient pressure drops with duration 1-150 s produced by vortices, and rapid turbulent fluctuations. We also analyze the effects on pressure measurements produced by a regional dust storm over Jezero at Ls 155°.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Arithmetics-Based Decomposition of Numeral Words -- Arithmetic Conditions give the Unpacking Strategy
Authors:
Isidor Konrad Maier,
Matthias Wolff
Abstract:
In this paper we present a novel numeral decomposer that is designed to revert Hurford's Packing Strategy. The Packing Strategy is a model on how numeral words are formed out of smaller numeral words by recursion. The decomposer does not simply check decimal digits but it also works for numerals formed on base 20 or any other base or even combinations of different bases. All assumptions that we us…
▽ More
In this paper we present a novel numeral decomposer that is designed to revert Hurford's Packing Strategy. The Packing Strategy is a model on how numeral words are formed out of smaller numeral words by recursion. The decomposer does not simply check decimal digits but it also works for numerals formed on base 20 or any other base or even combinations of different bases. All assumptions that we use are justified with Hurford's Packing Strategy. The decomposer reads through the numeral. When it finds a sub-numeral, it checks arithmetic conditions to decide whether or not to unpack the sub-numeral. The goal is to unpack those numerals that can sensibly be substituted by similar numerals. E.g., in 'twenty-seven thousand and two hundred and six' it should unpack 'twenty-seven' and 'two hundred and six', as those could each be sensibly replaced by any numeral from 1 to 999. Our most used condition is: If S is a substitutable sub-numeral of a numeral N, then 2*value(S) < value(N). We have tested the decomposer on numeral systems in 254 different natural languages. We also developed a reinforcement learning algorithm based on the decomposer. Both algorithms' code and the results are open source on GitHub.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
An area growth argument for null mean curvature flow along the standard de Sitter lightcone
Authors:
Markus Wolff
Abstract:
We consider null mean curvature flow along the standard lightcone in the de Sitter spacetime. This flow was first studied by Roesch--Scheuer along null hypersurfaces for the detection of MOTS, and independently by the author in the specific case of the standard Minkowski lightcone. Similar to the Minkowski case, null mean curvature flow along the de Sitter lightcone can be related to $2d$-Ricci fl…
▽ More
We consider null mean curvature flow along the standard lightcone in the de Sitter spacetime. This flow was first studied by Roesch--Scheuer along null hypersurfaces for the detection of MOTS, and independently by the author in the specific case of the standard Minkowski lightcone. Similar to the Minkowski case, null mean curvature flow along the de Sitter lightcone can be related to $2d$-Ricci flow for surfaces of genus $0$ by an appropriate rescaling. Building on this rescaling procedure, we analyse singularity formation, asymptotic behavior and ancient solutions to the flow.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
How to Do Machine Learning with Small Data? -- A Review from an Industrial Perspective
Authors:
Ivan Kraljevski,
Yong Chul Ju,
Dmitrij Ivanov,
Constanze Tschöpe,
Matthias Wolff
Abstract:
Artificial intelligence experienced a technological breakthrough in science, industry, and everyday life in the recent few decades. The advancements can be credited to the ever-increasing availability and miniaturization of computational resources that resulted in exponential data growth. However, because of the insufficient amount of data in some cases, employing machine learning in solving compl…
▽ More
Artificial intelligence experienced a technological breakthrough in science, industry, and everyday life in the recent few decades. The advancements can be credited to the ever-increasing availability and miniaturization of computational resources that resulted in exponential data growth. However, because of the insufficient amount of data in some cases, employing machine learning in solving complex tasks is not straightforward or even possible. As a result, machine learning with small data experiences rising importance in data science and application in several fields. The authors focus on interpreting the general term of "small data" and their engineering and industrial application role. They give a brief overview of the most important industrial applications of machine learning and small data. Small data is defined in terms of various characteristics compared to big data, and a machine learning formalism was introduced. Five critical challenges of machine learning with small data in industrial applications are presented: unlabeled data, imbalanced data, missing data, insufficient data, and rare events. Based on those definitions, an overview of the considerations in domain representation and data acquisition is given along with a taxonomy of machine learning approaches in the context of small data.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Minimalist Grammar: Construction without Overgeneration
Authors:
Isidor Konrad Maier,
Johannes Kuhn,
Jesse Beisegel,
Markus Huber-Liebl,
Matthias Wolff
Abstract:
In this paper we give instructions on how to write a minimalist grammar (MG). In order to present the instructions as an algorithm, we use a variant of context free grammars (CFG) as an input format. We can exclude overgeneration, if the CFG has no recursion, i.e. no non-terminal can (indirectly) derive to a right-hand side containing itself. The constructed MGs utilize licensors/-ees as a special…
▽ More
In this paper we give instructions on how to write a minimalist grammar (MG). In order to present the instructions as an algorithm, we use a variant of context free grammars (CFG) as an input format. We can exclude overgeneration, if the CFG has no recursion, i.e. no non-terminal can (indirectly) derive to a right-hand side containing itself. The constructed MGs utilize licensors/-ees as a special way of exception handling. A CFG format for a derivation $A\_eats\_B\mapsto^* peter\_eats\_apples$, where $A$ and $B$ generate noun phrases, normally leads to overgeneration, e.\,g., $i\_eats\_apples$. In order to avoid overgeneration, a CFG would need many non-terminal symbols and rules, that mainly produce the same word, just to handle exceptions. In our MGs however, we can summarize CFG rules that produce the same word in one item and handle exceptions by a proper distribution of licensees/-ors. The difficulty with this technique is that in most generations the majority of licensees/-ors is not needed, but still has to be triggered somehow. We solve this problem with $ε$-items called \emph{adapters}.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Families of non time-symmetric initial data sets and Penrose-like energy inequalities
Authors:
Armando J. Cabrera Pacheco,
Markus Wolff
Abstract:
Motivated by solving the constraint equations in the evolutionary form suggested by Rácz, we propose a family of asymptotically flat initial data sets which are "asymptotically spherically symmetric" at infinity. Within this family, we obtain Penrose-like energy estimates and establish the existence of solutions for the constraint equations in the spherical symmetric and totally umbilic cases.
Motivated by solving the constraint equations in the evolutionary form suggested by Rácz, we propose a family of asymptotically flat initial data sets which are "asymptotically spherically symmetric" at infinity. Within this family, we obtain Penrose-like energy estimates and establish the existence of solutions for the constraint equations in the spherical symmetric and totally umbilic cases.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
On effects of the null energy condition on totally umbilic hypersurfaces in a class of static spacetimes
Authors:
Markus Wolff
Abstract:
We study the effects of the null energy condition on totally umbilic hypersurfaces in a class of static spacetimes, both in the spacelike and the timelike case, respectively. In the spacelike case, we study totally umbilic warped product graphs and give a full characterization of embedded surfaces with constant spacetime mean curvature using an Alexandrov Theorem by Brendle and Borghini--Fogagnolo…
▽ More
We study the effects of the null energy condition on totally umbilic hypersurfaces in a class of static spacetimes, both in the spacelike and the timelike case, respectively. In the spacelike case, we study totally umbilic warped product graphs and give a full characterization of embedded surfaces with constant spacetime mean curvature using an Alexandrov Theorem by Brendle and Borghini--Fogagnolo--Pinamonti. In the timelike case, we achieve a characterization of photon surfaces with constant umbilicity factor similar to a result by Cederbaum--Galloway.
△ Less
Submitted 10 January, 2024; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Some new perspectives on the Kruskal--Szekeres extension with applications to photon surfaces
Authors:
Carla Cederbaum,
Markus Wolff
Abstract:
It is a well-known fact that the Schwarzschild spacetime admits a maximal spacetime extension in null coordinates which extends the exterior Schwarzschild region past the Killing horizon, called the Kruskal-Szekeres extension. This method of extending the Schwarzschild spacetime was later generalized by Brill-Hayward to a class of spacetimes of "profile $h$" across non-degenerate Killing horizons.…
▽ More
It is a well-known fact that the Schwarzschild spacetime admits a maximal spacetime extension in null coordinates which extends the exterior Schwarzschild region past the Killing horizon, called the Kruskal-Szekeres extension. This method of extending the Schwarzschild spacetime was later generalized by Brill-Hayward to a class of spacetimes of "profile $h$" across non-degenerate Killing horizons. Circumventing analytical subtleties in their approach, we reconfirm this fact by reformulating the problem as an ODE, and showing that the ODE admits a solution if and only if the naturally arising Killing horizon is non-degenerate. Notably, this approach lends itself to discussing regularity across the horizon for non-smooth metrics.
We will discuss applications to the study of photon surfaces, extending results by Cederbaum-Galloway and Cederbaum-Jahns-Vičánek-Martínez beyond the Killing horizon. In particular, our analysis asserts that photon surfaces approaching the Killing horizon must necessarily cross it.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Model predictive control for the prescription of antithyroid agents
Authors:
Maylin Menzel,
Tobias M. Wolff,
Johannes W. Dietrich,
Matthias A. Müller
Abstract:
Although hyperthyroidism is a common disease, the pharmaceutical therapy is based on a trial-and-error approach. We extend a mathematical model of the pituitary-thyroid feedback loop such that the intake of one antithyroid agent, namely methimazole (MMI), can be considered and use a model predictive control (MPC) scheme to determine suitable dosages.
Although hyperthyroidism is a common disease, the pharmaceutical therapy is based on a trial-and-error approach. We extend a mathematical model of the pituitary-thyroid feedback loop such that the intake of one antithyroid agent, namely methimazole (MMI), can be considered and use a model predictive control (MPC) scheme to determine suitable dosages.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
GEANN: Scalable Graph Augmentations for Multi-Horizon Time Series Forecasting
Authors:
Sitan Yang,
Malcolm Wolff,
Shankar Ramasubramanian,
Vincent Quenneville-Belair,
Ronak Metha,
Michael W. Mahoney
Abstract:
Encoder-decoder deep neural networks have been increasingly studied for multi-horizon time series forecasting, especially in real-world applications. However, to forecast accurately, these sophisticated models typically rely on a large number of time series examples with substantial history. A rapidly growing topic of interest is forecasting time series which lack sufficient historical data -- oft…
▽ More
Encoder-decoder deep neural networks have been increasingly studied for multi-horizon time series forecasting, especially in real-world applications. However, to forecast accurately, these sophisticated models typically rely on a large number of time series examples with substantial history. A rapidly growing topic of interest is forecasting time series which lack sufficient historical data -- often referred to as the ``cold start'' problem. In this paper, we introduce a novel yet simple method to address this problem by leveraging graph neural networks (GNNs) as a data augmentation for enhancing the encoder used by such forecasters. These GNN-based features can capture complex inter-series relationships, and their generation process can be optimized end-to-end with the forecasting task. We show that our architecture can use either data-driven or domain knowledge-defined graphs, scaling to incorporate information from multiple very large graphs with millions of nodes. In our target application of demand forecasting for a large e-commerce retailer, we demonstrate on both a small dataset of 100K products and a large dataset with over 2 million products that our method improves overall performance over competitive baseline models. More importantly, we show that it brings substantially more gains to ``cold start'' products such as those newly launched or recently out-of-stock.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
A De Lellis-Müller type estimate on the Minkowski lightcone
Authors:
Markus Wolff
Abstract:
We prove an analogue statement to an estimate by De Lellis-Müller in $\mathbb{R}^3$ on the standard Minkowski lightcone. More precisely, we show that under some additional assumptions, any spacelike cross section of the standard lightcone is $W^{2,2}$-close to a round surface provided the trace-free part of a scalar second fundamental form $A$ is sufficiently small in $L^2$. To determine the corre…
▽ More
We prove an analogue statement to an estimate by De Lellis-Müller in $\mathbb{R}^3$ on the standard Minkowski lightcone. More precisely, we show that under some additional assumptions, any spacelike cross section of the standard lightcone is $W^{2,2}$-close to a round surface provided the trace-free part of a scalar second fundamental form $A$ is sufficiently small in $L^2$. To determine the correct intrinsically round cross section of reference, we define an associated $4$-vector, which transforms equivariantly under Lorentz transformations in the restricted Lorentz group. A key step in the proof consists of a geometric, scaling invariant estimate, and we give two different proofs. One utilizes a recent characterization of singularity models of null mean curvature flow along the standard lightcone by the author, while the other is heavily inspired by an almost-Schur lemma by De Lellis-Top**.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Probing spectral and timing properties of the X-ray pulsar RX J0440.9+4431 in the giant outburst of 2022-2023
Authors:
Manoj Mandal,
Rahul Sharma,
Sabyasachi Pal,
G. K. Jaisawal,
Keith C. Gendreau,
Mason Ng,
Andrea Sanna,
Christian Malacaria,
Francesco Tombesi,
E. C. Ferrara,
Craig B. Markwardt,
Michael T. Wolff,
Joel B. Coley
Abstract:
The X-ray pulsar RX J0440.9+4431 went through a giant outburst in 2022 and reached a record-high flux of 2.3 Crab, as observed by Swift/BAT. We study the evolution of different spectral and timing properties of the source using NICER observations. The pulse period is found to decrease from 208 s to 205 s, and the pulse profile evolves significantly with energy and luminosity. The hardness ratio an…
▽ More
The X-ray pulsar RX J0440.9+4431 went through a giant outburst in 2022 and reached a record-high flux of 2.3 Crab, as observed by Swift/BAT. We study the evolution of different spectral and timing properties of the source using NICER observations. The pulse period is found to decrease from 208 s to 205 s, and the pulse profile evolves significantly with energy and luminosity. The hardness ratio and hardness intensity diagram (HID) show remarkable evolution during the outburst. The HID turns towards the diagonal branch from the horizontal branch above a transition (critical) luminosity, suggesting the presence of two accretion modes. Each NICER spectrum can be described using a cutoff power law with a blackbody component and a Gaussian at 6.4 keV. At higher luminosities, an additional Gaussian at 6.67 keV is used. The observed photon index shows negative and positive correlations with X-ray flux below and above the critical luminosity, respectively. The evolution of spectral and timing parameters suggests a possible change in the emission mechanism and beaming pattern of the pulsar depending on the spectral transition to sub- and super-critical accretion regimes. Based on the critical luminosity, the magnetic field of the neutron star can be estimated in the order of 10$^{12}$ or 10$^{13}$ G, assuming different theoretical models. Moreover, the observed iron emission line evolves from a narrow to a broad feature with luminosity. Two emission lines originating from neutral and highly ionized Fe atoms were evident in the spectra around 6.4 keV and 6.67 keV (higher luminosities).
△ Less
Submitted 14 September, 2023; v1 submitted 31 May, 2023;
originally announced June 2023.
-
Robust Stability of Gaussian Process Based Moving Horizon Estimation
Authors:
Tobias M. Wolff,
Victor G. Lopez,
Matthias A. Müller
Abstract:
In this paper, we introduce a Gaussian process based moving horizon estimation (MHE) framework. The scheme is based on offline collected data and offline hyperparameter optimization. In particular, compared to standard MHE schemes, we replace the mathematical model of the system by the posterior mean of the Gaussian process. To account for the uncertainty of the learned model, we exploit the poste…
▽ More
In this paper, we introduce a Gaussian process based moving horizon estimation (MHE) framework. The scheme is based on offline collected data and offline hyperparameter optimization. In particular, compared to standard MHE schemes, we replace the mathematical model of the system by the posterior mean of the Gaussian process. To account for the uncertainty of the learned model, we exploit the posterior variance of the learned Gaussian process in the weighting matrices of the cost function of the proposed MHE scheme. We prove practical robust exponential stability of the resulting estimator using a recently proposed Lyapunov-based proof technique. Finally, the performance of the Gaussian process based MHE scheme is illustrated via a nonlinear system.
△ Less
Submitted 14 June, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Diurnal and Seasonal Map** of Martian Ices With EMIRS
Authors:
Aurélien Stcherbinine,
Christopher S. Edwards,
Michael D. Smith,
Michael J. Wolff,
Christopher Haberle,
Eman Al Tunaiji,
Nathan M. Smith,
Kezman Saboi,
Saadat Anwar,
Lucas Lange,
Philip R. Christensen
Abstract:
Condensation and sublimation of ices at the surface of the planet is a key part of both the Martian H$_2$O and CO$_2$ cycles, either from a seasonal or diurnal aspect. While most of the ice is located within the polar caps, surface frost is known to be formed during nighttime down to equatorial latitudes. Here, we use data from the Emirates Mars Infrared Spectrometer (EMIRS) onboard the Emirates M…
▽ More
Condensation and sublimation of ices at the surface of the planet is a key part of both the Martian H$_2$O and CO$_2$ cycles, either from a seasonal or diurnal aspect. While most of the ice is located within the polar caps, surface frost is known to be formed during nighttime down to equatorial latitudes. Here, we use data from the Emirates Mars Infrared Spectrometer (EMIRS) onboard the Emirates Mars Mission (EMM) to monitor the diurnal and seasonal evolution of the ices at the surface of Mars over almost one Martian year. The unique local time coverage provided by the instrument allows us to observe the apparition of equatorial CO$_2$ frost in the second half of the Martian night around the equinoxes, to its sublimation at sunrise.
△ Less
Submitted 27 June, 2023; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Treating Hyperthyroidism: Model Predictive Control for the Prescription of Antithyroid Agents
Authors:
Tobias M. Wolff,
Maylin Menzel,
Johannes W. Dietrich,
Matthias A. Müller
Abstract:
In this work, we propose an approach to determine the dosages of antithyroid agents to treat hyperthyroid patients. Instead of relying on a trial-and-error approach as it is commonly done in clinical practice, we suggest to determine the dosages by means of a model predictive control (MPC) scheme. To this end, we extend a mathematical model of the pituitary-thyroid feedback loop such that the inta…
▽ More
In this work, we propose an approach to determine the dosages of antithyroid agents to treat hyperthyroid patients. Instead of relying on a trial-and-error approach as it is commonly done in clinical practice, we suggest to determine the dosages by means of a model predictive control (MPC) scheme. To this end, we extend a mathematical model of the pituitary-thyroid feedback loop such that the intake of methimazole, a common antithyroid agent, can be considered. Based on this extension, we develop an MPC scheme to determine suitable dosages. In numerical simulations, we consider scenarios in which (i) patients are affected by Graves' disease and take the medication orally, (ii) patients are additionally affected by high intrathyroidal iodide concentrations and take the medication orally and, (iii) patients suffering from a life-threatening thyrotoxicosis, in which the medication is usually given intravenously. Our results suggest that determining the medication dosages by means of an MPC scheme is a promising alternative to the currently applied trial-and-error approach.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
A Generalized Analytical Model For Thermal And Bulk Comptonization In Accretion-Powered X-Ray Pulsars
Authors:
Peter A. Becker,
Michael T. Wolff
Abstract:
We develop a new theoretical model describing the formation of the radiation spectrum in accretion-powered X-ray pulsars as a result of bulk and thermal Comptonization of photons in the accretion column. The new model extends the previous model developed by the authors in four ways: (1) we utilize a conical rather than cylindrical geometry; (2) the radiation components emitted from the column wall…
▽ More
We develop a new theoretical model describing the formation of the radiation spectrum in accretion-powered X-ray pulsars as a result of bulk and thermal Comptonization of photons in the accretion column. The new model extends the previous model developed by the authors in four ways: (1) we utilize a conical rather than cylindrical geometry; (2) the radiation components emitted from the column wall and the column top are computed separately; (3) the model allows for a non-zero impact velocity at the stellar surface; and (4) the velocity profile of the gas merges with Newtonian free-fall far from the star. We show that these extensions allow the new model to simulate sources over a wide range of accretion rates. The model is based on a rigorous mathematical approach in which we obtain an exact series solution for the Green's function describing the reprocessing of monochromatic seed photons. Emergent spectra are then computed by convolving the Green's function with bremsstrahlung, cyclotron, and blackbody photon sources. The range of the new model is demonstrated via applications to the high-luminosity source Her X-1, and the low-luminosity source X Per. The new model suggests that the observed increase in spectral hardness associated with increasing luminosity in Her X-1 may be due to a decrease in the surface impact velocity, which increases the $P$d$V$ work done on the radiation field by the gas.
△ Less
Submitted 25 November, 2022;
originally announced November 2022.
-
Revealing the role of tin fluoride additive in narrow bandgap Pb-Sn perovskites for highly efficient flexible all-perovskite tandem cells
Authors:
Johnpaul K. Pious,
Yannick Zwirner,
Huagui Lai,
Selina Olthof,
Quentin Jeangros,
Evgeniia Gilshtein,
Radha K. Kothandaraman,
Kerem Artuk,
Philipp Wechsler,
Cong Chen,
Christian M. Wolff,
Dewei Zhao,
Ayodhya. N. Tiwari,
Fan Fu
Abstract:
Tin fluoride (SnF2) is an indispensable additive for high-efficiency Pb-Sn perovskite solar cells (PSCs). However, the spatial distribution of SnF2 in the perovskite absorber is seldom investigated while essential for a comprehensive understanding of the exact role of the SnF2 additive. Herein, we revealed the spatial distribution of SnF2 additive and made structure-optoelectronic properties-flexi…
▽ More
Tin fluoride (SnF2) is an indispensable additive for high-efficiency Pb-Sn perovskite solar cells (PSCs). However, the spatial distribution of SnF2 in the perovskite absorber is seldom investigated while essential for a comprehensive understanding of the exact role of the SnF2 additive. Herein, we revealed the spatial distribution of SnF2 additive and made structure-optoelectronic properties-flexible photovoltaic performance correlation. We observed the chemical transformation of SnF2 to a fluorinated oxy-phase on the Pb-Sn perovskite film surface, due to its rapid oxidation. In addition, at the buried perovskite interface, we detected and visualized the accumulation of F- ions. We found that the photoluminescence quantum yield of Pb-Sn perovskite reached the highest value with 10 mol% SnF2 in the precursor solution. When integrating the optimized absorber in flexible devices, we obtained the flexible Pb-Sn perovskite narrow bandgap (1.24 eV) solar cells with an efficiency of 18.5% and demonstrated 23.1%-efficient flexible 4-terminal all-perovskite tandem cells.
△ Less
Submitted 24 October, 2022;
originally announced October 2022.
-
Robust Data-Driven Moving Horizon Estimation for Linear Discrete-Time Systems
Authors:
Tobias M. Wolff,
Victor G. Lopez,
Matthias A. Müller
Abstract:
In this paper, a robust data-driven moving horizon estimation (MHE) scheme for linear time-invariant discrete-time systems is introduced. The scheme solely relies on offline collected data without employing any system identification step. We prove practical robust exponential stability for the setting where both the online measurements and the offline collected data are corrupted by non-vanishing…
▽ More
In this paper, a robust data-driven moving horizon estimation (MHE) scheme for linear time-invariant discrete-time systems is introduced. The scheme solely relies on offline collected data without employing any system identification step. We prove practical robust exponential stability for the setting where both the online measurements and the offline collected data are corrupted by non-vanishing and bounded noise. The behavior of the novel robust data-driven MHE scheme is illustrated by means of simulation examples and compared to a standard model-based MHE scheme, where the model is identified using the same offline data as for the data-driven MHE scheme.
△ Less
Submitted 28 February, 2024; v1 submitted 17 October, 2022;
originally announced October 2022.
-
Automorphisms of some variants of fine graphs
Authors:
Frédéric Le Roux,
Maxime Wolff
Abstract:
Recently Bowden, Hensel and Webb defined the fine curve graph for surfaces, extending the notion of curve graphs for the study of homeomorphism or diffeomorphism groups of surfaces. Later Long, Margalit, Pham, Verberne and Yao proved that for a closed surface of genus $g\geqslant 2$, the automorphism group of the fine graph is naturally isomorphic to the homeomorphism group of the surface. We exte…
▽ More
Recently Bowden, Hensel and Webb defined the fine curve graph for surfaces, extending the notion of curve graphs for the study of homeomorphism or diffeomorphism groups of surfaces. Later Long, Margalit, Pham, Verberne and Yao proved that for a closed surface of genus $g\geqslant 2$, the automorphism group of the fine graph is naturally isomorphic to the homeomorphism group of the surface. We extend this result to the torus case $g=1$; in fact our method works for more general surfaces, compact or not, orientable or not. We also discuss the case of a smooth version of the fine graph.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
InSight Pressure Data Recalibration, and Its Application to the Study of Long-Term Pressure Changes on Mars
Authors:
L. Lange,
F. Forget,
D. Banfield,
M. Wolff,
A. Spiga,
E. Millour,
D. Viúdez-Moreiras,
A. Bierjon,
S. Piqueux,
C. Newman,
J. Pla-García,
W. B. Banerdt
Abstract:
Observations of the South Polar Residual Cap suggest a possible erosion of the cap, leading to an increase of the global mass of the atmosphere. We test this assumption by making the first comparison between Viking 1 and InSight surface pressure data, which were recorded 40 years apart. Such a comparison also allows us to determine changes in the dynamics of the seasonal ice caps between these two…
▽ More
Observations of the South Polar Residual Cap suggest a possible erosion of the cap, leading to an increase of the global mass of the atmosphere. We test this assumption by making the first comparison between Viking 1 and InSight surface pressure data, which were recorded 40 years apart. Such a comparison also allows us to determine changes in the dynamics of the seasonal ice caps between these two periods. To do so, we first had to recalibrate the InSight pressure data because of their unexpected sensitivity to the sensor temperature. Then, we had to design a procedure to compare distant pressure measurements. We propose two surface pressure interpolation methods at the local and global scale to do the comparison. The comparison of Viking and InSight seasonal surface pressure variations does not show changes larger than +-8 Pa in the CO2 cycle. Such conclusions are supported by an analysis of Mars Science Laboratory (MSL) pressure data. Further comparisons with images of the south seasonal cap taken by the Viking 2 orbiter and MARCI camera do not display significant changes in the dynamics of this cap over a 40 year period. Only a possible larger extension of the North Cap after the global storm of MY 34 is observed, but the physical mechanisms behind this anomaly are not well determined. Finally, the first comparison of MSL and InSight pressure data suggests a pressure deficit at Gale crater during southern summer, possibly resulting from a large presence of dust suspended within the crater.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
The Radius of PSR J0740+6620 from NICER with NICER Background Estimates
Authors:
Tuomo Salmi,
Serena Vinciguerra,
Devarshi Choudhury,
Thomas E. Riley,
Anna L. Watts,
Ronald A. Remillard,
Paul S. Ray,
Slavko Bogdanov,
Sebastien Guillot,
Zaven Arzoumanian,
Cecilia Chirenti,
Alexander J. Dittmann,
Keith C. Gendreau,
Wynn C. G. Ho,
M. Coleman Miller,
Sharon M. Morsink,
Zorawar Wadiasingh,
Michael T. Wolff
Abstract:
We report a revised analysis for the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, studied previously with joint fits to NICER and XMM-Newton data by Riley et al. (2021) and Miller et al. (2021). We perform a similar Bayesian estimation for the pulse-profile model parameters, except that instead of fitting simultaneously the XMM-Newton data, we use the bes…
▽ More
We report a revised analysis for the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, studied previously with joint fits to NICER and XMM-Newton data by Riley et al. (2021) and Miller et al. (2021). We perform a similar Bayesian estimation for the pulse-profile model parameters, except that instead of fitting simultaneously the XMM-Newton data, we use the best available NICER background estimates to constrain the number of photons detected from the source. This approach eliminates any potential issues in the cross-calibration between these two instruments, providing thus an independent check of the robustness of the analysis. The obtained neutron star parameter constraints are compatible with the already published results, with a slight dependence on how conservative the imposed background limits are. A tighter lower limit causes the inferred radius to increase, and a tighter upper limit causes it to decrease. We also extend the study of the inferred emission geometry to examine the degree of deviation from antipodality of the hot regions. We show that there is a significant offset to an antipodal spot configuration, mainly due to the non-half-cycle azimuthal separation of the two emitting spots. The offset angle from the antipode is inferred to be above 25 degrees with 84% probability. This seems to exclude a centered-dipolar magnetic field in PSR J0740+6620.
△ Less
Submitted 13 January, 2023; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Impact of the coagulation of dust particles on Mars during the 2018 global dust storm
Authors:
Tanguy Bertrand,
Melinda Kahre,
Richard Urata,
Anni Määttänen,
Franck Montmessin,
John Wilson,
Mike Wolff
Abstract:
Coagulation of particles occurs when two particles collide and stick together. In the Martian atmosphere, dust coagulation would increase the effective particle size, as small particles accrete to larger particles. Murphy et al. (1990) showed that Brownian coagulation of dust in the Martian atmosphere was not significant, due to the low dust particle mixing ratios, while Montmessin et al. (2002) a…
▽ More
Coagulation of particles occurs when two particles collide and stick together. In the Martian atmosphere, dust coagulation would increase the effective particle size, as small particles accrete to larger particles. Murphy et al. (1990) showed that Brownian coagulation of dust in the Martian atmosphere was not significant, due to the low dust particle mixing ratios, while Montmessin et al. (2002) and Fedorova et al. (2014) showed that it mostly involves particle radii smaller than 0.1 um. However, the effects of coagulation have never been explored in 3D, during a global dust storm, i.e. in presence of larger numbers of small particles. Here we revisit this issue by using the NASA Ames Mars Global Climate Model (MGCM) to investigate the temporal and spatial changes in dust particle sizes during the 2018 global storm due to coagulation and the overall impact of these processes on Mars' climate. Our parameterization for coagulation includes the effect of Brownian motion, Brownian diffusion enhancement, and gravitational collection. We show that Brownian motion and Brownian diffusion enhancement dominate gravitational collection. The impact of coagulation is significant during the storm, with coagulation rates increased by a factor of 10 compared to non-storm conditions. The effective particle radius can be increased by a factor of 2 due to coagulation, leading to a 20K colder atmosphere above 30 km altitude. Overall, our parameterization improves the representation of the decay phase of the storm relative to observations. The process remains significant outside the storm period if large numbers of submicron-sized particles are involved. It may be possible, in GCMs, to lift larger amounts of submicron-sized particles from the surface without excess dust buildup in the atmosphere, thus improving the agreement with some of the observations without diverging from the observed column opacities.
△ Less
Submitted 1 September, 2022; v1 submitted 25 August, 2022;
originally announced August 2022.
-
A Two Martian Years Survey of Water Ice Clouds on Mars with ACS onboard TGO
Authors:
Aurélien Stcherbinine,
Franck Montmessin,
Mathieu Vincendon,
Michael J. Wolff,
Margaux Vals,
Oleg Kovablev,
Anna Fedorova,
Alexander Trokhimovskiy,
Gaetan Lacombe,
Lucio Baggio
Abstract:
The middle infrared (MIR) channel of the Atmospheric Chemistry Suite (ACS) instrument onboard the ExoMars Trace Gas Orbiter (TGO) ESA-Roscosmos mission has performed Solar occultation measurements of the Martian atmosphere in the 2.3-4.2 $μ$m spectral range since March 2018, which now covers two Martian Years (MY). We use the methodology previously developed for the study of the MY 34 Global Dust…
▽ More
The middle infrared (MIR) channel of the Atmospheric Chemistry Suite (ACS) instrument onboard the ExoMars Trace Gas Orbiter (TGO) ESA-Roscosmos mission has performed Solar occultation measurements of the Martian atmosphere in the 2.3-4.2 $μ$m spectral range since March 2018, which now covers two Martian Years (MY). We use the methodology previously developed for the study of the MY 34 Global Dust Storm (GDS) (Stcherbinine et al., 2020) to monitor the properties (effective radii, extinction, altitude) of the Martian water ice clouds over the first two Martian years covered by ACS-MIR. The observations encompass the period $L_s$ = 163° in MY 34 to $L_s$ = 181° in MY 36. We determine that the typical altitude of the clouds varies by 20 to 40 km between the summer and winter, with a maximum extension up to 80 km during summer in the midlatitudes. Similarly, we also note that for a limited temporal range, the altitude of the clouds also varies by 20 to 40 km between the polar regions and the midlatitudes. We also compare observations acquired during the MY 34 GDS to observations from the same period in MY 35, using that latter as a reference to characterize the effects of this GDS on the clouds' properties. In addition, we compare our retrievals with the predictions of the Mars Planetary Climate Model (PCM), which shows a reasonable agreement overall for the altitude of the clouds, although the model usually predicts lower altitudes for the top of the clouds.
△ Less
Submitted 12 January, 2023; v1 submitted 23 August, 2022;
originally announced August 2022.
-
On the evolution of hypersurfaces along their inverse spacetime mean curvature
Authors:
Gerhard Huisken,
Markus Wolff
Abstract:
We construct weak solutions for the evolution of hypersurfaces along their inverse space-time mean curvature in asymptotically flat maximal initial data sets. As the speed of the new flow is given by a space-time invariant, it can detect both future- and past-trapped apparent horizons. The weak solution extends concepts developed by Huisken-Ilmanen for inverse mean curvature flow and by Moore for…
▽ More
We construct weak solutions for the evolution of hypersurfaces along their inverse space-time mean curvature in asymptotically flat maximal initial data sets. As the speed of the new flow is given by a space-time invariant, it can detect both future- and past-trapped apparent horizons. The weak solution extends concepts developed by Huisken-Ilmanen for inverse mean curvature flow and by Moore for inverse null mean curvature flow.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
The discovery of the 528.6 Hz accreting millisecond X-ray pulsar MAXI J1816-195
Authors:
Peter Bult,
Diego Altamirano,
Zaven Arzoumanian,
Deepto Chakrabarty,
Jérôme Chenevez,
Elizabeth C. Ferrara,
Keith C. Gendreau,
Sebastien Guillot,
Tolga Güver,
Wataru Iwakiri,
Gaurava K. Jaisawal,
Giulio C. Mancuso,
Christian Malacaria,
Mason Ng,
Andrea Sanna,
Tod E. Strohmayer,
Zorawar Wadiasingh,
Michael T. Wolff
Abstract:
We present the discovery of 528.6 Hz pulsations in the new X-ray transient MAXI J1816-195. Using NICER, we observed the first recorded transient outburst from the neutron star low-mass X-ray binary MAXI J1816-195 over a period of 28 days. From a timing analysis of the 528.6 Hz pulsations, we find that the binary system is well described as a circular orbit with an orbital period of 4.8 hours and a…
▽ More
We present the discovery of 528.6 Hz pulsations in the new X-ray transient MAXI J1816-195. Using NICER, we observed the first recorded transient outburst from the neutron star low-mass X-ray binary MAXI J1816-195 over a period of 28 days. From a timing analysis of the 528.6 Hz pulsations, we find that the binary system is well described as a circular orbit with an orbital period of 4.8 hours and a projected semi-major axis of 0.26 light-seconds for the pulsar, which constrains the mass of the donor star to $0.10-0.55 M_\odot$. Additionally, we observed 15 thermonuclear X-ray bursts showing a gradual evolution in morphology over time, and a recurrence time as short as 1.4 hours. We did not detect evidence for photospheric radius expansion, placing an upper limit on the source distance of 8.6 kpc.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
-
Scaling waveguide-integrated superconducting nanowire single-photon detector solutions to large numbers of independent optical channels
Authors:
Matthias Häußler,
Robin Terhaar,
Martin A. Wolff,
Helge Gehring,
Fabian Beutel,
Wladick Hartmann,
Nicolai Walter,
Max Tillmann,
Mahdi Ahangarianabhari,
Michael Wahl,
Tino Röhlicke,
Hans-Jürgen Rahn,
Wolfram H. P. Pernice,
Carsten Schuck
Abstract:
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here we show how a scalable number of waveguide-integr…
▽ More
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art photon counting performance with up to 60 % system detection efficiency and down to 26.0 ps timing accuracy for individually addressable detectors. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing and imaging applications.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Ultrafast quantum key distribution using fully parallelized quantum channels
Authors:
Robin Terhaar,
Jasper Rödiger,
Matthias Häußler,
Michael Wahl,
Helge Gehring,
Martin A. Wolff,
Fabian Beutel,
Wladick Hartmann,
Nicolai Walter,
Jonas Hanke,
Peter Hanne,
Nino Walenta,
Maximilian Diedrich,
Nicolas Perlot,
Max Tillmann,
Tino Röhlicke,
Mahdi Ahangarianabhari,
Carsten Schuck,
Wolfram H. P. Pernice
Abstract:
The field of quantum information processing offers secure communication protected by the laws of quantum mechanics and is on the verge of finding wider application for information transfer of sensitive data. To overcome the obstacle of inadequate cost-efficiency, extensive research is being done on the many components required for high data throughput using quantum key distribution (QKD). Aiming f…
▽ More
The field of quantum information processing offers secure communication protected by the laws of quantum mechanics and is on the verge of finding wider application for information transfer of sensitive data. To overcome the obstacle of inadequate cost-efficiency, extensive research is being done on the many components required for high data throughput using quantum key distribution (QKD). Aiming for an application-oriented solution, we report on the realization of a multichannel QKD system for plug-and-play high-bandwidth secure communication at telecom wavelength. For this purpose, a rack-sized multichannel superconducting nanowire single photon detector (SNSPD) system, as well as a highly parallelized time-correlated single photon counting (TCSPC) unit have been developed and linked to an FPGA-controlled QKD evaluation setup allowing for continuous operation and achieving high secret key rates using a coherent-one-way protocol.
△ Less
Submitted 19 July, 2022; v1 submitted 15 July, 2022;
originally announced July 2022.
-
Driving in Real Life with Inverse Reinforcement Learning
Authors:
Tung Phan-Minh,
Forbes Howington,
Ting-Sheng Chu,
Sang Uk Lee,
Momchil S. Tomov,
Nanxiang Li,
Caglayan Dicle,
Samuel Findler,
Francisco Suarez-Ruiz,
Robert Beaudoin,
Bo Yang,
Sammy Omari,
Eric M. Wolff
Abstract:
In this paper, we introduce the first learning-based planner to drive a car in dense, urban traffic using Inverse Reinforcement Learning (IRL). Our planner, DriveIRL, generates a diverse set of trajectory proposals, filters these trajectories with a lightweight and interpretable safety filter, and then uses a learned model to score each remaining trajectory. The best trajectory is then tracked by…
▽ More
In this paper, we introduce the first learning-based planner to drive a car in dense, urban traffic using Inverse Reinforcement Learning (IRL). Our planner, DriveIRL, generates a diverse set of trajectory proposals, filters these trajectories with a lightweight and interpretable safety filter, and then uses a learned model to score each remaining trajectory. The best trajectory is then tracked by the low-level controller of our self-driving vehicle. We train our trajectory scoring model on a 500+ hour real-world dataset of expert driving demonstrations in Las Vegas within the maximum entropy IRL framework. DriveIRL's benefits include: a simple design due to only learning the trajectory scoring function, relatively interpretable features, and strong real-world performance. We validated DriveIRL on the Las Vegas Strip and demonstrated fully autonomous driving in heavy traffic, including scenarios involving cut-ins, abrupt braking by the lead vehicle, and hotel pickup/dropoff zones. Our dataset will be made public to help further research in this area.
△ Less
Submitted 7 June, 2022;
originally announced June 2022.
-
Ricci flow on surfaces along the standard lightcone in the $3+1$-Minkowski spacetime
Authors:
Markus Wolff
Abstract:
Identifying any conformally round metric on the $2$-sphere with a unique cross section on the standard lightcone in the $3+1$-Minkowski spacetime, we gain a new perspective on $2d$-Ricci flow on topological spheres. It turns out that in this setting, Ricci flow is equivalent to a null mean curvature flow first studied by Roesch--Scheuer along null hypersurfaces. Exploiting this equivalence, we can…
▽ More
Identifying any conformally round metric on the $2$-sphere with a unique cross section on the standard lightcone in the $3+1$-Minkowski spacetime, we gain a new perspective on $2d$-Ricci flow on topological spheres. It turns out that in this setting, Ricci flow is equivalent to a null mean curvature flow first studied by Roesch--Scheuer along null hypersurfaces. Exploiting this equivalence, we can translate well-known results from $2d$-Ricci flow first proven by Hamilton into a full classification of the singularity models for null mean curvature flow in the Minkowski lightcone. Conversely, we obtain a new proof of Hamilton's classical result using only the maximum principle.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Transcendental Julia sets of positive finite Lebesgue measure
Authors:
Mareike Wolff
Abstract:
We show that there exists a transcendental entire function whose Julia set has positive finite Lebesgue measure.
We show that there exists a transcendental entire function whose Julia set has positive finite Lebesgue measure.
△ Less
Submitted 23 April, 2022;
originally announced April 2022.
-
Transitivity of normal subgroups of the map** class group on character varieties
Authors:
Julien Marché,
Maxime Wolff
Abstract:
We prove that the action of any non-trivial normal subgroup of the map** class group of a surface of genus $g\geqslant 2$ is almost minimal on the character variety $X(π_1Σ_g,{\rm SU}_2)$: the orbit of almost every point is dense.
We prove that the action of any non-trivial normal subgroup of the map** class group of a surface of genus $g\geqslant 2$ is almost minimal on the character variety $X(π_1Σ_g,{\rm SU}_2)$: the orbit of almost every point is dense.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Most Hitchin representations are strongly dense
Authors:
D. D. Long,
A. W. Reid,
M. Wolff
Abstract:
We prove that generic Hitchin representations are strongly dense: every pair of non commuting elements in their image generate a Zariski-dense subgroup of SL_n(R). The proof uses a theorem of Rapinchuk, Benyash-Krivetz and Chernousov, to show that the set of Hitchin representations is Zariski-dense in the variety of representations of a surface group in SL_n(R).
We prove that generic Hitchin representations are strongly dense: every pair of non commuting elements in their image generate a Zariski-dense subgroup of SL_n(R). The proof uses a theorem of Rapinchuk, Benyash-Krivetz and Chernousov, to show that the set of Hitchin representations is Zariski-dense in the variety of representations of a surface group in SL_n(R).
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Discovery, Timing, and Multiwavelength Observations of the Black Widow Millisecond Pulsar PSR J1555-2908
Authors:
Paul S. Ray,
Lars Nieder,
Colin J. Clark,
Scott M. Ransom,
H. Thankful Cromartie,
Dale A. Frail,
Kunal P. Mooley,
Huib Intema,
Preshanth Jagannathan,
Paul Demorest,
Kevin Stovall,
Jules P. Halpern,
Julia Deneva,
Sebastien Guillot,
Matthew Kerr,
Samuel J. Swihart,
Philippe Bruel,
Ben W. Stappers,
Andrew Lyne,
Mitch Mickaliger,
Fernando Camilo,
Elizabeth C. Ferrara,
Michael T. Wolff,
P. F. Michelson
Abstract:
We report the discovery of PSR J1555-2908, a 1.79 ms radio and gamma-ray pulsar in a 5.6 hr binary system with a minimum companion mass of 0.052 $M_\odot$. This fast and energetic ($\dot E = 3 \times 10^{35}$ erg/s) millisecond pulsar was first detected as a gamma-ray point source in Fermi LAT sky survey observations. Guided by a steep spectrum radio point source in the Fermi error region, we perf…
▽ More
We report the discovery of PSR J1555-2908, a 1.79 ms radio and gamma-ray pulsar in a 5.6 hr binary system with a minimum companion mass of 0.052 $M_\odot$. This fast and energetic ($\dot E = 3 \times 10^{35}$ erg/s) millisecond pulsar was first detected as a gamma-ray point source in Fermi LAT sky survey observations. Guided by a steep spectrum radio point source in the Fermi error region, we performed a search at 820 MHz with the Green Bank Telescope that first discovered the pulsations. The initial radio pulse timing observations provided enough information to seed a search for gamma-ray pulsations in the LAT data, from which we derive a timing solution valid for the full Fermi mission. In addition to the radio and gamma-ray pulsation discovery and timing, we searched for X-ray pulsations using NICER but no significant pulsations were detected. We also obtained time-series r-band photometry that indicates strong heating of the companion star by the pulsar wind. Material blown off the heated companion eclipses the 820 MHz radio pulse during inferior conjunction of the companion for ~10% of the orbit, which is twice the angle subtended by its Roche lobe in an edge-on system.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Accreting on the edge: a luminosity-dependent cyclotron line in the Be/X-ray Binary 2S 1553-542 accompanied by accretion regimes transition
Authors:
Christian Malacaria,
Yash Bhargava,
Joel B. Coley,
Lorenzo Ducci,
Pragati Pradhan,
Ralf Ballhausen,
Felix Fuerst,
Nazma Islam,
Gaurava K. Jaisawal,
Peter Jenke,
Peter Kretschmar,
Ingo Kreykenbohm,
Katja Pottschmidt,
Ekaterina Sokolova-Lapa,
Rudiger Staubert,
Joern Wilms,
Colleen A. Wilson-Hodge,
Michael T. Wolff
Abstract:
Accreting X-ray pulsars (XRPs) undergo luminous X-ray outbursts during which the luminosity-dependent spectral and timing features of the neutron star's emission can be analyzed in detail, thus shedding light on the accretion regime at work. We took advantage of a monitoring campaign performed with NuSTAR, Swift/XRT, AstroSat and NICER, to follow the Be/X-ray Binary 2S 1553-542 along one of its ra…
▽ More
Accreting X-ray pulsars (XRPs) undergo luminous X-ray outbursts during which the luminosity-dependent spectral and timing features of the neutron star's emission can be analyzed in detail, thus shedding light on the accretion regime at work. We took advantage of a monitoring campaign performed with NuSTAR, Swift/XRT, AstroSat and NICER, to follow the Be/X-ray Binary 2S 1553-542 along one of its rare outbursts and trace its spectral and timing evolution. We report the discovery of a luminosity-dependent cyclotron line energy for the first time in this source. The pulse profiles and pulsed fraction also show variability along the outburst, consistently with the interpretation that the source transitions from the sub-critical to the super-critical accretion regime, separated by a critical luminosity of L$_{crit}\approx4\times10^{37}$ erg/s.
△ Less
Submitted 6 February, 2022; v1 submitted 27 January, 2022;
originally announced January 2022.
-
Signal Strength and Noise Drive Feature Preference in CNN Image Classifiers
Authors:
Max Wolff,
Stuart Wolff
Abstract:
Feature preference in Convolutional Neural Network (CNN) image classifiers is integral to their decision making process, and while the topic has been well studied, it is still not understood at a fundamental level. We test a range of task relevant feature attributes (including shape, texture, and color) with varying degrees of signal and noise in highly controlled CNN image classification experime…
▽ More
Feature preference in Convolutional Neural Network (CNN) image classifiers is integral to their decision making process, and while the topic has been well studied, it is still not understood at a fundamental level. We test a range of task relevant feature attributes (including shape, texture, and color) with varying degrees of signal and noise in highly controlled CNN image classification experiments using synthetic datasets to determine feature preferences. We find that CNNs will prefer features with stronger signal strength and lower noise irrespective of whether the feature is texture, shape, or color. This provides guidance for a predictive model for task relevant feature preferences, demonstrates pathways for bias in machine models that can be avoided with careful controls on experimental setup, and suggests that comparisons between how humans and machines prefer task relevant features in vision classification tasks should be revisited. Code to reproduce experiments in this paper can be found at \url{https://github.com/mwolff31/signal_preference}.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Self-assembly and percolation in magnetic colloids
Authors:
Hauke Carstensen,
Anne Krämer,
Vassilios Kapaklis,
Max Wolff
Abstract:
We study the self-assembly of branching-chain networks and crystals in a binary colloidal system with tunable interactions. The particle positions are extracted from microscope images and order parameters are extracted by image processing and statistical analysis. With these, we construct phase diagrams with respect to particle density, ratio and interaction. In order to draw a more complete pictu…
▽ More
We study the self-assembly of branching-chain networks and crystals in a binary colloidal system with tunable interactions. The particle positions are extracted from microscope images and order parameters are extracted by image processing and statistical analysis. With these, we construct phase diagrams with respect to particle density, ratio and interaction. In order to draw a more complete picture, we complement the experiments with computer simulations. We establish a region in the phase diagram, where bead ratios and interactions are symmetric, promoting percolated structures.
△ Less
Submitted 11 May, 2022; v1 submitted 29 December, 2021;
originally announced December 2021.
-
Data-Based Moving Horizon Estimation for Linear Discrete-Time Systems
Authors:
Tobias M. Wolff,
Victor G. Lopez,
Matthias A. Müller
Abstract:
This paper introduces a data-based moving horizon estimation (MHE) scheme for linear time-invariant discrete-time systems. The scheme solely relies on collected data without employing any system identification step. Robust global exponential stability of the data-based MHE is proven under standard assumptions for the case where the online output measurements are corrupted by some non-vanishing mea…
▽ More
This paper introduces a data-based moving horizon estimation (MHE) scheme for linear time-invariant discrete-time systems. The scheme solely relies on collected data without employing any system identification step. Robust global exponential stability of the data-based MHE is proven under standard assumptions for the case where the online output measurements are corrupted by some non-vanishing measurement noise. A simulation example illustrates the behavior of the data-based MHE scheme.
△ Less
Submitted 28 April, 2022; v1 submitted 9 November, 2021;
originally announced November 2021.
-
Fitting strategies of accretion column models and application to the broadband spectrum of Cen X-3
Authors:
Philipp Thalhammer,
Matthias Bissinger,
Ralf Ballhausen,
Katja Pottschmidt,
Michael T. Wolff,
Jakob Stierhof,
Ekaterina Sokolova-Lapa,
Felix Fürst,
Christian Malacaria,
Amy Gottlieb,
Diana M. Marcu-Cheatham,
Peter A. Becker,
Jörn Wilms
Abstract:
Due to the complexity of modeling the radiative transfer inside the accretion columns of neutron star binaries, their X-ray spectra are still commonly described with phenomenological models, for example, a cutoff power law. While the behavior of these models is well understood and they allow for a comparison of different sources and studying source behavior, the extent to which the underlying phys…
▽ More
Due to the complexity of modeling the radiative transfer inside the accretion columns of neutron star binaries, their X-ray spectra are still commonly described with phenomenological models, for example, a cutoff power law. While the behavior of these models is well understood and they allow for a comparison of different sources and studying source behavior, the extent to which the underlying physics can be derived from the model parameters is very limited. During recent years, several physically motivated spectral models have been developed to overcome these limitations. Their application, however, is generally computationally much more expensive and they require a high number of parameters which are difficult to constrain. Previous works have presented an analytical solution to the radiative transfer equation inside the accretion column assuming a velocity profile that is linear in the optical depth. An implementation of this solution that is both fast and accurate enough to be fitted to observed spectra is available as a model in XSPEC. The main difficulty of this implementation is that some solutions violate energy conservation and therefore have to be rejected by the user. We propose a novel fitting strategy that ensures energy conservation during the $χ^2$-minimization which simplifies the application of the model considerably. We demonstrate this approach as well a study of possible parameter degeneracies with a comprehensive Markov-chain Monte Carlo analysis of the complete parameter space for a combined NuSTAR and Swift/XRT dataset of Cen X-3. The derived accretion-flow structure features a small column radius of $\sim$63 m and a spectrum dominated by bulk-Comptonization of bremsstrahlung seed photons, in agreement with previous studies.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
Multimodal Trajectory Prediction Conditioned on Lane-Graph Traversals
Authors:
Nachiket Deo,
Eric M. Wolff,
Oscar Beijbom
Abstract:
Accurately predicting the future motion of surrounding vehicles requires reasoning about the inherent uncertainty in driving behavior. This uncertainty can be loosely decoupled into lateral (e.g., kee** lane, turning) and longitudinal (e.g., accelerating, braking). We present a novel method that combines learned discrete policy rollouts with a focused decoder on subsets of the lane graph. The po…
▽ More
Accurately predicting the future motion of surrounding vehicles requires reasoning about the inherent uncertainty in driving behavior. This uncertainty can be loosely decoupled into lateral (e.g., kee** lane, turning) and longitudinal (e.g., accelerating, braking). We present a novel method that combines learned discrete policy rollouts with a focused decoder on subsets of the lane graph. The policy rollouts explore different goals given current observations, ensuring that the model captures lateral variability. Longitudinal variability is captured by our latent variable model decoder that is conditioned on various subsets of the lane graph. Our model achieves state-of-the-art performance on the nuScenes motion prediction dataset, and qualitatively demonstrates excellent scene compliance. Detailed ablations highlight the importance of the policy rollouts and the decoder architecture.
△ Less
Submitted 15 September, 2021; v1 submitted 28 June, 2021;
originally announced June 2021.