-
Towards improved property prediction of two-dimensional (2D) materials using many-body Quantum Monte Carlo methods
Authors:
Daniel Wines,
Jeonghwan Ahn,
Anouar Benali,
Paul R. C. Kent,
Jaron T. Krogel,
Yongkyung Kwon,
Lubos Mitas,
Fernando A. Reboredo,
Brenda Rubenstein,
Kayahan Saritas,
Hyeondeok Shin,
Ivan Štich,
Can Ataca
Abstract:
The field of two-dimensional (2D) materials has grown dramatically in the last two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computation applications. These 2D structures, which are often exfoliated from layered van der Waals (vdW) materials, possess highly inhomogeneous electron densities and can possess short- and…
▽ More
The field of two-dimensional (2D) materials has grown dramatically in the last two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computation applications. These 2D structures, which are often exfoliated from layered van der Waals (vdW) materials, possess highly inhomogeneous electron densities and can possess short- and long-range electron correlations. The complexities of 2D materials make them challenging to study with standard mean-field electronic structure methods such as density functional theory (DFT), which relies on approximations for the unknown exchange-correlation functional. In order to overcome the limitations of DFT, highly accurate many-body electronic structure approaches such as Diffusion Monte Carlo (DMC) can be utilized. In the past decade, DMC has been used to calculate accurate magnetic, electronic, excitonic, and topological properties in addition to accurately capturing interlayer interactions and cohesion and adsorption energetics of 2D materials. This approach has been applied to 2D systems of wide interest including graphene, phosphorene, MoS$_2$, CrI$_3$, VSe$_2$, GaSe, GeSe, borophene, and several others. In this review article, we highlight some successful recent applications of DMC to 2D systems for improved property predictions beyond standard DFT.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Data-driven Design of High Pressure Hydride Superconductors using DFT and Deep Learning
Authors:
Daniel Wines,
Kamal Choudhary
Abstract:
The observation of superconductivity in hydride-based materials under ultrahigh pressures (for example, H$_3$S and LaH$_{10}$) has fueled the interest in a more data-driven approach to discovering new high-pressure hydride superconductors. In this work, we performed density functional theory (DFT) calculations to predict the critical temperature ($T_c$) of over 900 hydride materials under a pressu…
▽ More
The observation of superconductivity in hydride-based materials under ultrahigh pressures (for example, H$_3$S and LaH$_{10}$) has fueled the interest in a more data-driven approach to discovering new high-pressure hydride superconductors. In this work, we performed density functional theory (DFT) calculations to predict the critical temperature ($T_c$) of over 900 hydride materials under a pressure range of (0 to 500) GPa, where we found 122 dynamically stable structures with a $T_c$ above MgB$_2$ (39 K). To accelerate screening, we trained a graph neural network (GNN) model to predict $T_c$ and demonstrated that a universal machine learned force-field can be used to relax hydride structures under arbitrary pressures, with significantly reduced cost. By combining DFT and GNNs, we can establish a more complete map of hydrides under pressure.
△ Less
Submitted 31 May, 2024; v1 submitted 19 December, 2023;
originally announced December 2023.
-
Modeling Chemical Exfoliation of Non-van der Waals Chromium Sulfides by Machine Learning Interatomic Potentials and Monte Carlo Simulations
Authors:
Akram Ibrahim,
Daniel Wines,
Can Ataca
Abstract:
The chemical exfoliation of non-van der Waals (vdW) materials to ultrathin nanosheets remains a formidable challenge. This difficulty arises from the strong preference of these materials to engage in three-dimensional chemical bonding, resulting in uncontrolled atomic migration into the vdW gaps during cation deintercalation from the bulk structure, ultimately leading to unpredictable structural d…
▽ More
The chemical exfoliation of non-van der Waals (vdW) materials to ultrathin nanosheets remains a formidable challenge. This difficulty arises from the strong preference of these materials to engage in three-dimensional chemical bonding, resulting in uncontrolled atomic migration into the vdW gaps during cation deintercalation from the bulk structure, ultimately leading to unpredictable structural disorder. We propose a generic framework using neural network potentials (NNPs) to accurately model the widespread nonstoichiometric environments resulting from disordered atomic migrations during exfoliation of non-vdW materials. We apply our framework to investigate the crystal structures and phase transformations occurring during the exfoliation of non-vdW nonstoichiometric Cr$_{(1-x)}$S systems, a compelling material category with substantial potential for two-dimensional (2D) magnetic applications. The efficacy of the NNP outperforms the conventional cluster expansion, exhibiting superior accuracy and transferability to unexplored crystal structures and compositions. By employing the NNP in simulated annealing optimizations, we predict low-energy Cr$_{(1-x)}$S structures anticipated to result from experimental synthesis. A notable structural transition is discerned at the Cr$_{0.5}$S composition, with half of the Cr atoms preferentially migrating to vdW gaps. This aligns with experimental observations in the chemical exfoliation of 2D CrS$_2$, and emphasizes the vital role of excess Cr atoms beyond the Cr/S = $1/2$ composition ratio in stabilizing vdW gaps. Additionally, we utilize the NNP in a vacancy diffusion Monte Carlo simulation to illustrate the impact of lateral compressive strains in catalyzing the formation of vdW gaps within non-vdW CrS$_2$ slabs. This provides a direct pathway for more facile exfoliation of ultrathin nanosheets from non-vdW materials through strain engineering.
△ Less
Submitted 10 December, 2023; v1 submitted 9 August, 2023;
originally announced August 2023.
-
JARVIS-Leaderboard: A Large Scale Benchmark of Materials Design Methods
Authors:
Kamal Choudhary,
Daniel Wines,
Kangming Li,
Kevin F. Garrity,
Vishu Gupta,
Aldo H. Romero,
Jaron T. Krogel,
Kayahan Saritas,
Addis Fuhr,
Panchapakesan Ganesh,
Paul R. C. Kent,
Keqiang Yan,
Yuchao Lin,
Shuiwang Ji,
Ben Blaiszik,
Patrick Reiser,
Pascal Friederich,
Ankit Agrawal,
Pratyush Tiwary,
Eric Beyerle,
Peter Minch,
Trevor David Rhone,
Ichiro Takeuchi,
Robert B. Wexler,
Arun Mannodi-Kanakkithodi
, et al. (13 additional authors not shown)
Abstract:
Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform…
▽ More
Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard
△ Less
Submitted 26 March, 2024; v1 submitted 20 June, 2023;
originally announced June 2023.
-
Recent progress in the JARVIS infrastructure for next-generation data-driven materials design
Authors:
Daniel Wines,
Ramya Gurunathan,
Kevin F. Garrity,
Brian DeCost,
Adam J. Biacchi,
Francesca Tavazza,
Kamal Choudhary
Abstract:
The Joint Automated Repository for Various Integrated Simulations (JARVIS) infrastructure at the National Institute of Standards and Technology (NIST) is a large-scale collection of curated datasets and tools with more than 80000 materials and millions of properties. JARVIS uses a combination of electronic structure, artificial intelligence (AI), advanced computation and experimental methods to ac…
▽ More
The Joint Automated Repository for Various Integrated Simulations (JARVIS) infrastructure at the National Institute of Standards and Technology (NIST) is a large-scale collection of curated datasets and tools with more than 80000 materials and millions of properties. JARVIS uses a combination of electronic structure, artificial intelligence (AI), advanced computation and experimental methods to accelerate materials design. Here we report some of the new features that were recently included in the infrastructure such as: 1) doubling the number of materials in the database since its first release, 2) including more accurate electronic structure methods such as Quantum Monte Carlo, 3) including graph neural network-based materials design, 4) development of unified force-field, 5) development of a universal tight-binding model, 6) addition of computer-vision tools for advanced microscopy applications, 7) development of a natural language processing tool for text-generation and analysis, 8) debuting a large-scale benchmarking endeavor, 9) including quantum computing algorithms for solids, 10) integrating several experimental datasets and 11) staging several community engagement and outreach events. New classes of materials, properties, and workflows added to the database include superconductors, two-dimensional (2D) magnets, magnetic topological materials, metal-organic frameworks, defects, and interface systems. The rich and reliable datasets, tools, documentation, and tutorials make JARVIS a unique platform for modern materials design. JARVIS ensures openness of data and tools to enhance reproducibility and transparency and to promote a healthy and collaborative scientific environment.
△ Less
Submitted 25 October, 2023; v1 submitted 19 May, 2023;
originally announced May 2023.
-
Inverse Design of Next-generation Superconductors Using Data-driven Deep Generative Models
Authors:
Daniel Wines,
Tian Xie,
Kamal Choudhary
Abstract:
Finding new superconductors with a high critical temperature ($T_c$) has been a challenging task due to computational and experimental costs. We present a diffusion model inspired by the computer vision community to generate new superconductors with unique structures and chemical compositions. Specifically, we used a crystal diffusion variational autoencoder (CDVAE) along with atomistic line graph…
▽ More
Finding new superconductors with a high critical temperature ($T_c$) has been a challenging task due to computational and experimental costs. We present a diffusion model inspired by the computer vision community to generate new superconductors with unique structures and chemical compositions. Specifically, we used a crystal diffusion variational autoencoder (CDVAE) along with atomistic line graph neural network (ALIGNN) pretrained models and the Joint Automated Repository for Various Integrated Simulations (JARVIS) superconducting database of density functional theory (DFT) calculations to generate new superconductors with a high success rate. We started with a DFT dataset of $\approx$1000 superconducting materials to train the diffusion model. We used the model to generate 3000 new structures, which along with pre-trained ALIGNN screening results in 61 candidates. For the top candidates, we performed DFT calculations for validation. Such approaches go beyond the funnel-like materials design approaches and allow for the inverse design of next-generation materials.
△ Less
Submitted 27 July, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
A Quantum Monte Carlo study of the structural, energetic, and magnetic properties of two-dimensional (2D) H and T phase VSe$_2$
Authors:
Daniel Wines,
Juha Tiihonen,
Kayahan Saritas,
Jaron Krogel,
Can Ataca
Abstract:
Previous works have controversially claimed near-room temperature ferromagnetism in two-dimensional (2D) VSe$_2$, with conflicting results throughout the literature. These discrepancies in magnetic properties between both phases (T and H phase) of 2D VSe$_2$ are most likely due to the structural parameters being coupled to the magnetic properties. Specifically, both phases have a close lattice mat…
▽ More
Previous works have controversially claimed near-room temperature ferromagnetism in two-dimensional (2D) VSe$_2$, with conflicting results throughout the literature. These discrepancies in magnetic properties between both phases (T and H phase) of 2D VSe$_2$ are most likely due to the structural parameters being coupled to the magnetic properties. Specifically, both phases have a close lattice match and similar total energies, which makes it difficult to determine which phase is being observed experimentally. In this study, we used a combination of density functional theory (DFT), highly accurate diffusion Monte Carlo (DMC) and a surrogate Hessian line-search optimization technique to resolve the previously reported discrepancy in structural parameters and relative phase stability. With DMC accuracy, we determined the freestanding geometry of both phases and constructed a phase diagram. Our findings demonstrate the successes of the DMC method coupled with the surrogate Hessian structural optimization technique when applied to a 2D magnetic system.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
High-Throughput DFT-Based Discovery of Next Generation Two-Dimensional (2D) Superconductors
Authors:
Daniel Wines,
Kamal Choudhary,
Adam J. Biacchi,
Kevin F. Garrity,
Francesca Tavazza
Abstract:
High-throughput density functional theory (DFT) calculations allow for a systematic search for conventional superconductors. With the recent interest in two-dimensional (2D) superconductors, we used a high-throughput workflow to screen over 1,000 2D materials in the JARVIS-DFT database and performed electron-phonon coupling calculations, using the McMillan-Allen-Dynes formula to calculate the supe…
▽ More
High-throughput density functional theory (DFT) calculations allow for a systematic search for conventional superconductors. With the recent interest in two-dimensional (2D) superconductors, we used a high-throughput workflow to screen over 1,000 2D materials in the JARVIS-DFT database and performed electron-phonon coupling calculations, using the McMillan-Allen-Dynes formula to calculate the superconducting transition temperature ($T_c$) for 165 of them. Of these 165 materials, we identify 34 dynamically stable structures with transition temperatures above 5 K, including materials such as W$_2$N$_3$, NbO$_2$, ZrBrO, TiClO, NaSn$_2$S$_4$, Mg$_2$B$_4$C$_2$ and the previously unreported Mg$_2$B$_4$N$_2$ ($T_c$ = 21.8 K). Finally, we performed experiments to determine the $T_c$ of selected layered superconductors (2H-NbSe$_2$, 2H-NbS$_2$, ZrSiS, FeSe) and discuss the measured results within the context of our DFT results. We aim that the outcome of this workflow can guide future computational and experimental studies of new and emerging 2D superconductors by providing a roadmap of high-throughput DFT data.
△ Less
Submitted 10 February, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Systematic DFT+U and Quantum Monte Carlo benchmark of magnetic two-dimensional (2D) CrX$_3$ (X = I, Br, Cl, F)
Authors:
Daniel Wines,
Kamal Choudhary,
Francesca Tavazza
Abstract:
The search for two-dimensional (2D) magnetic materials has attracted a great deal of attention because of the experimental synthesis of 2D CrI$_3$, which has a measured Curie temperature of 45 K. Often times, these monolayers have a higher degree of electron correlation and require more sophisticated methods beyond density functional theory (DFT). Diffusion Monte Carlo (DMC) is a correlated electr…
▽ More
The search for two-dimensional (2D) magnetic materials has attracted a great deal of attention because of the experimental synthesis of 2D CrI$_3$, which has a measured Curie temperature of 45 K. Often times, these monolayers have a higher degree of electron correlation and require more sophisticated methods beyond density functional theory (DFT). Diffusion Monte Carlo (DMC) is a correlated electronic structure method that has been demonstrated successful for calculating the electronic and magnetic properties of a wide variety of 2D and bulk systems, since it has a weaker dependence on the Hubbard parameter (U) and density functional. In this study we designed a workflow that combines DFT+U and DMC in order to treat 2D correlated magnetic systems. We chose monolayer CrX$_3$ (X = I, Br, Cl, F), with a stronger focus on CrI$_3$ and CrBr$_3$, as a case study due to the fact that they have been experimentally realized and have a finite critical temperature. With this DFT+U and DMC workflow and the analytical method of Torelli and Olsen, we estimated an upper bound of 43.56 K for the T$_c$ of CrI$_3$ and 20.78 K for the T$_c$ of CrBr$_3$, in addition to analyzing the spin densities and magnetic properties with DMC and DFT+U. We expect that running this workflow for a well-known material class will aid in the future discovery and characterization of lesser known and more complex correlated 2D magnetic materials.
△ Less
Submitted 13 January, 2023; v1 submitted 21 September, 2022;
originally announced September 2022.
-
The intrinsic ferromagnetism of two-dimensional (2D) MnO$_2$ revisited: A many-body Quantum Monte Carlo and DFT+U study
Authors:
Daniel Wines,
Kayahan Saritas,
Can Ataca
Abstract:
Monolayer MnO$_2$ is one of the few predicted two-dimensional (2D) ferromagnets that has been experimentally synthesized and is commercially available. The Mermin-Wagner theorem states that magnetic order in a 2D material cannot persist unless magnetic anisotropy (MA) is present and perpendicular to the plane, which permits a finite critical temperature. Previous computational studies have predict…
▽ More
Monolayer MnO$_2$ is one of the few predicted two-dimensional (2D) ferromagnets that has been experimentally synthesized and is commercially available. The Mermin-Wagner theorem states that magnetic order in a 2D material cannot persist unless magnetic anisotropy (MA) is present and perpendicular to the plane, which permits a finite critical temperature. Previous computational studies have predicted the magnetic ordering and Curie temperature of 2D MnO$_2$ with DFT+U (Density Funtional Theory + Hubbard U correction), with the results having a strong dependence on the Hubbard U parameter. Diffusion Monte Carlo (DMC) is a correlated electronic structure method that has had demonstrated success for the electronic and magnetic properties of a variety of 2D and bulk systems since it has a weaker dependence on the starting Hubbard parameter and density functional. In this study, we used DMC and DFT+U to calculate the magnetic properties of monolayer MnO$_2$. We found that the ferromagnetic ordering is more favorable than antiferromagnetic and determined a statistical bound on the magnetic exchange parameter ($J$). In addition, we performed spin-orbit MA energy calculations using DFT+U and using our DMC and DFT+U parameters along with the analytical model of Torelli and Olsen, we estimated an upper bound of 28.8 K for the critical temperature of MnO$_2$. These QMC results intend to serve as an accurate theoretical benchmark, necessary for the realization and development of future 2D magnetic devices. These results also demonstrate the need for accurate methodologies to predict magnetic properties of correlated 2D materials.
△ Less
Submitted 16 March, 2022; v1 submitted 21 December, 2021;
originally announced December 2021.
-
A pathway towards high throughput Quantum Monte Carlo simulations for alloys: A case study of two-dimensional (2D) $GaS_xSe_{1-x}$
Authors:
Daniel Wines,
Kayahan Saritas,
Can Ataca
Abstract:
The study of alloys using computational methods has been a difficult task due to the usually unknown stoichiometry and local atomic ordering of the different structures experimentally. In order to combat this, first-principles methods have been coupled with statistical methods such as the Cluster Expansion formalism in order to construct the energy hull diagram, which helps to determine if an allo…
▽ More
The study of alloys using computational methods has been a difficult task due to the usually unknown stoichiometry and local atomic ordering of the different structures experimentally. In order to combat this, first-principles methods have been coupled with statistical methods such as the Cluster Expansion formalism in order to construct the energy hull diagram, which helps to determine if an alloyed structure can exist in nature. Traditionally, density functional theory (DFT) has been used in such workflows. In this work we propose to use chemically accurate many-body variational Monte Carlo (VMC) and diffusion Monte Carlo (DMC) methods to construct the energy hull diagram of an alloy system, due to the fact that such methods have a weaker dependence on the starting wavefunction and density functional, scale similarly to DFT with the number of electrons, and have had demonstrated success for a variety of materials. To carry out these simulations in a high-throughput manner, we propose a method called Jastrow sharing, which involves recycling the optimized Jastrow parameters between alloys with different stoichiometries. We show that this eliminates the need for extra VMC Jastrow optimization calculations and results in a significant computational cost savings (on average 1/4 savings of total computational time). Since it is a novel post-transition metal chalcogenide alloy series that has been synthesized in its few-layer form, we used monolayer $GaS_xSe_{1-x}$ as a case study for our workflow. By extensively testing our Jastrow sharing procedure for monolayer $GaS_xSe_{1-x}$ and quantifying the cost savings, we demonstrate how a pathway towards chemically accurate high-throughput simulations of alloys can be achieved using many-body VMC and DMC methods.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
A first-principles Quantum Monte Carlo study of two-dimensional (2D) GaSe
Authors:
Daniel Wines,
Kayahan Saritas,
Can Ataca
Abstract:
Two-dimensional (2D) post-transition metal chalcogenides (PTMC) have attracted attention due to their suitable band gaps and lower exciton binding energies, making them more appropriate for electronic, optical and water-splitting devices than graphene and monolayer transition metal dichalcogenides (TMDs). Of the predicted 2D PTMCs, GaSe has been reliably synthesized and experimentally characterize…
▽ More
Two-dimensional (2D) post-transition metal chalcogenides (PTMC) have attracted attention due to their suitable band gaps and lower exciton binding energies, making them more appropriate for electronic, optical and water-splitting devices than graphene and monolayer transition metal dichalcogenides (TMDs). Of the predicted 2D PTMCs, GaSe has been reliably synthesized and experimentally characterized. Despite this fact, quantities such as lattice parameters and band character vary significantly depending on which density functional theory (DFT) functional is used. Although many-body perturbation theory (GW approximation) has been used to correct the electronic structure and obtain the excited state properties of 2D GaSe, and solving the Bethe-Salpeter equation (BSE) has been used to find the optical gap, we find that the results depend strongly on the starting wavefunction. In attempt to correct these discrepancies, we employed the many-body Diffusion Monte Carlo (DMC) method to calculate the ground and excited state properties of GaSe because DMC has a weaker dependence on the trial wavefunction. We benchmark these results with available experimental data, DFT [local-density approximation, Perdew-Burke-Ernzerhof (PBE), strongly constrained and appropriately normed (SCAN) meta-GGA, and hybrid (HSE06) functionals] and GW-BSE (using PBE and SCAN wavefunctions) results. Our findings confirm monolayer GaSe is an indirect gap semiconductor (Gamma-M) with a quasiparticle electronic gap in close agreement with experiment and low exciton binding energy. We also benchmark the optimal lattice parameter, cohesive energy and ground state charge density with DMC and various DFT methods. We aim to present a terminal theoretical benchmark for pristine monolayer GaSe, which will aide in the further study of 2D PTMCs using DMC methods.
△ Less
Submitted 20 October, 2020; v1 submitted 27 July, 2020;
originally announced July 2020.