Showing 1–49 of 49 results for author: Wilson, R W

Upgrading the Submillimeter Array: wSMA and beyond

Authors: Paul K. Grimes, Garrett K. Keating, Raymond Blundell, Robert D. Christensen, Mark Gurwell, Attila Kovacs, Timothy Norton, Scott N. Paine, Ramprasad Rao, Edward C. -Y. Tong, Jonathan Weintroub, David Wilner, Robert W. Wilson, Lingzhen Zeng, Qizhou Zhang

Abstract: The Submillimeter Array (SMA) is an array of 8 antennas operating at millimeter and submillimeter wavelengths on Maunakea, Hawaii, operated by the Smithsonian Astrophysical Observatory and Academia Sinica Institute of Astronomy and Astrophysics, Taiwan. Over the past several years, we have been preparing a major upgrade to the SMA that will replace the aging original receiver cryostats and receive… ▽ More The Submillimeter Array (SMA) is an array of 8 antennas operating at millimeter and submillimeter wavelengths on Maunakea, Hawaii, operated by the Smithsonian Astrophysical Observatory and Academia Sinica Institute of Astronomy and Astrophysics, Taiwan. Over the past several years, we have been preparing a major upgrade to the SMA that will replace the aging original receiver cryostats and receiver cartridges with all new cryostats and new 230 and 345 GHz receiver designs. This wideband upgrade (wSMA) will also include significantly increased instantaneous bandwidth, improved sensitivity, and greater capabilities for dual frequency observations. In this paper, we will describe the wSMA receiver upgrade and status, as well as the future upgrades that will be enabled by the deployment of the wSMA receivers. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: To be published in the proceedings of SPIE Astronomical Telescopes + Instrumentation 2024, paper number 13096-122

Lens mass estimate in the Galactic disk extreme parallax microlensing event Gaia19dke

Authors: M. Maskoliūnas, Ł. Wyrzykowski, K. Howil, K. A. Rybicki, P. Zieliński, Z. Kaczmarek, K. Kruszyńska, M. Jabłońska, J. Zdanavičius, E. Pakštienė, V. Čepas, P. J. Mikołajczyk, R. Janulis, M. Gromadzki, N. Ihanec, R. Adomavičienė, K. Šiškauskaitė, M. Bronikowski, P. Sivak, A. Stankevičiūtė, M. Sitek, M. Ratajczak, U. Pylypenko, I. Gezer, S. Awiphan , et al. (52 additional authors not shown)

Abstract: We present the results of our analysis of Gaia19dke, an extraordinary microlensing event in the Cygnus constellation that was first spotted by the {\gaia} satellite. This event featured a strong microlensing parallax effect, which resulted in multiple peaks in the light curve. We conducted extensive photometric, spectroscopic, and high-resolution imaging follow-up observations to determine the mas… ▽ More We present the results of our analysis of Gaia19dke, an extraordinary microlensing event in the Cygnus constellation that was first spotted by the {\gaia} satellite. This event featured a strong microlensing parallax effect, which resulted in multiple peaks in the light curve. We conducted extensive photometric, spectroscopic, and high-resolution imaging follow-up observations to determine the mass and the nature of the invisible lensing object. Using the Milky Way priors on density and velocity of lenses, we found that the dark lens is likely to be located at a distance of $D_L =(3.05^{+4.10}_{-2.42})$kpc, and has a mass of $M_L =(0.51^{+3.07}_{-0.40}) M_\odot$. Based on its low luminosity and mass, we propose that the lens in Gaia19dke event is an isolated white dwarf. △ Less

Submitted 6 September, 2023; originally announced September 2023.

Comments: 16 pages, submitted to A&A

SHIMM: A Versatile Seeing Monitor for Astronomy

Authors: Saavidra Perera, Richard W. Wilson, Tim Butterley, James Osborn, Ollie J. D. Farley, Douglas J. Laidlaw

Abstract: Characterisation of atmospheric optical turbulence is crucial for the design and operation of modern ground-based optical telescopes. In particular, the effective application of adaptive optics correction on large and extremely large telescopes relies on a detailed knowledge of the prevailing atmospheric conditions, including the vertical profile of the optical turbulence strength and the atmosphe… ▽ More Characterisation of atmospheric optical turbulence is crucial for the design and operation of modern ground-based optical telescopes. In particular, the effective application of adaptive optics correction on large and extremely large telescopes relies on a detailed knowledge of the prevailing atmospheric conditions, including the vertical profile of the optical turbulence strength and the atmospheric coherence timescale. The Differential Image Motion Monitor (DIMM) has been employed as a facility seeing monitor at many astronomical observing sites across the world for several decades, providing a reliable estimate of the seeing angle. Here we present the Shack-Hartmann Image Motion Monitor (SHIMM), which is a development of the DIMM instrument, in that it exploits differential image motion measurements of bright target stars. However, the SHIMM employs a Shack-Hartmann wavefront sensor in place of the two-hole aperture mask utilised by the DIMM. This allows the SHIMM to provide an estimate of the seeing, unbiased by shot noise or scintillation effects. The SHIMM also produces a low-resolution (three-layer) measure of the vertical turbulence profile, as well as an estimate of the coherence timescale. The SHIMM is designed as a low-cost, portable, instrument. It is comprised of off-the-shelf components so that it is easy to duplicate and well-suited for comparisons of atmospheric conditions within and between different observing sites. Here, the SHIMM design and methodology for estimating key atmospheric parameters will be presented, as well as initial field test results with comparisons to the Stereo-SCIDAR instrument. △ Less

Submitted 28 February, 2023; originally announced March 2023.

Comments: Published in MNRAS

Journal ref: MNRAS, Volume 520, 2023, Pages 5475-5486

Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps

Authors: Daniel M. Levinstein, Saavidra Perera, Quinn M. Konopacky, Alex Madurowicz, Bruce Macintosh, Lisa Poyneer, Richard W. Wilson

Abstract: The Earth's turbulent atmosphere results in speckled and blurred images of astronomical objects when observed by ground based visible and near-infrared telescopes. Adaptive optics (AO) systems are employed to reduce these atmospheric effects by using wavefront sensors (WFS) and deformable mirrors. Some AO systems are not fast enough to correct for strong, fast, high turbulence wind layers leading… ▽ More The Earth's turbulent atmosphere results in speckled and blurred images of astronomical objects when observed by ground based visible and near-infrared telescopes. Adaptive optics (AO) systems are employed to reduce these atmospheric effects by using wavefront sensors (WFS) and deformable mirrors. Some AO systems are not fast enough to correct for strong, fast, high turbulence wind layers leading to the wind butterfly effect, or wind-driven halo, reducing contrast capabilities in coronagraphic images. Estimating the effective wind speed of the atmosphere allows us to calculate the atmospheric coherence time. This is not only an important parameter to understand for site characterization but could be used to help remove the wind butterfly in post processing. Here we present a method for estimating the atmospheric effective wind speed from spatio-temporal covariance maps generated from pseudo open-loop (POL) WFS data. POL WFS data is used as it aims to reconstruct the full wavefront information when operating in closed-loop. The covariance maps show how different atmospheric turbulent layers traverse the telescope. Our method successfully recovered the effective wind speed from simulated WFS data generated with the soapy python library. The simulated atmospheric turbulence profiles consist of two turbulent layers of ranging strengths and velocities. The method has also been applied to Gemini Planet Imager (GPI) AO WFS data. This gives insight into how the effective wind speed can affect the wind-driven halo seen in the AO image point spread function. In this paper, we will present results from simulated and GPI WFS data. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 7 pages, 6 figures

Journal ref: SPIE Proceedings Volume 12185, Adaptive Optics Systems VIII; 121855X (2022)

HiPERCAM: a quintuple-beam, high-speed optical imager on the 10.4-m Gran Telescopio Canarias

Authors: V. S. Dhillon, N. Bezawada, M. Black, S. D. Dixon, T. Gamble, X. Gao, D. M. Henry, P. Kerry, S. P. Littlefair, D. W. Lunney, T. R. Marsh, C. Miller, S. G. Parsons, R. P. Ashley, E. Breedt, A. Brown, M. J. Dyer, M. J. Green, I. Pelisoli, D. I. Sahman, J. Wild, D. J. Ives, L. Mehrgan, J. Stegmeier, C. M. Dubbeldam , et al. (14 additional authors not shown)

Abstract: HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$ nm) images simultaneously on its five CCD cameras, each of 3.1 arcmin (diagonal) field of view. The detectors in HiPERCAM are frame-transfer devices cooled ther… ▽ More HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$ nm) images simultaneously on its five CCD cameras, each of 3.1 arcmin (diagonal) field of view. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electrically to 183 K, thereby allowing both long-exposure, deep imaging of faint targets, as well as high-speed (over 1000 windowed frames per second) imaging of rapidly varying targets. A comparison-star pick-off system in the telescope focal plane increases the effective field of view to 6.7 arcmin for differential photometry. Combining HiPERCAM with the world's largest optical telescope enables the detection of astronomical sources to $g_s \sim 23$ in 1 s and $g_s \sim 28$ in 1 h. In this paper we describe the scientific motivation behind HiPERCAM, present its design, report on its measured performance, and outline some planned enhancements. △ Less

Submitted 21 July, 2021; originally announced July 2021.

Comments: 18 pages, 12 figures, 1 table, accepted for publication in Monthly Notices of the Royal Astronomical Society

Gaia Photometric Science Alerts

Authors: S. T. Hodgkin, D. L. Harrison, E. Breedt, T. Wevers, G. Rixon, A. Delgado, A. Yoldas, Z. Kostrzewa-Rutkowska, Ł. Wyrzykowski, M. van Leeuwen, N. Blagorodnova, H. Campbell, D. Eappachen, M. Fraser, N. Ihanec, S. E. Koposov, K. Kruszyńska, G. Marton, K. A. Rybicki, A. G. A. Brown, P. W. Burgess, G. Busso, S. Cowell, F. De Angeli, C. Diener , et al. (86 additional authors not shown)

Abstract: Since July 2014, the Gaia mission has been engaged in a high-spatial-resolution, time-resolved, precise, accurate astrometric, and photometric survey of the entire sky. Aims: We present the Gaia Science Alerts project, which has been in operation since 1 June 2016. We describe the system which has been developed to enable the discovery and publication of transient photometric events as seen by G… ▽ More Since July 2014, the Gaia mission has been engaged in a high-spatial-resolution, time-resolved, precise, accurate astrometric, and photometric survey of the entire sky. Aims: We present the Gaia Science Alerts project, which has been in operation since 1 June 2016. We describe the system which has been developed to enable the discovery and publication of transient photometric events as seen by Gaia. Methods: We outline the data handling, timings, and performances, and we describe the transient detection algorithms and filtering procedures needed to manage the high false alarm rate. We identify two classes of events: (1) sources which are new to Gaia and (2) Gaia sources which have undergone a significant brightening or fading. Validation of the Gaia transit astrometry and photometry was performed, followed by testing of the source environment to minimise contamination from Solar System objects, bright stars, and fainter near-neighbours. Results: We show that the Gaia Science Alerts project suffers from very low contamination, that is there are very few false-positives. We find that the external completeness for supernovae, $C_E=0.46$, is dominated by the Gaia scanning law and the requirement of detections from both fields-of-view. Where we have two or more scans the internal completeness is $C_I=0.79$ at 3 arcsec or larger from the centres of galaxies, but it drops closer in, especially within 1 arcsec. Conclusions: The per-transit photometry for Gaia transients is precise to 1 per cent at $G=13$, and 3 per cent at $G=19$. The per-transit astrometry is accurate to 55 milliarcseconds when compared to Gaia DR2. The Gaia Science Alerts project is one of the most homogeneous and productive transient surveys in operation, and it is the only survey which covers the whole sky at high spatial resolution (subarcsecond), including the Galactic plane and bulge. △ Less

Submitted 2 June, 2021; originally announced June 2021.

Comments: 26 pages, 26 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 652, A76 (2021)

Limitations imposed by optical turbulence profile structure and evolution on tomographic reconstruction for the ELT

Authors: O. J. D. Farley, J. Osborn, T. Morris, T. Fusco, B. Neichel, C. Correia, R. W. Wilson

Abstract: The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These… ▽ More The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These changes can be due to the unpredictable evolution of turbulent layers on meteorological timescales as short as minutes. Here we investigate the effect of changing atmospheric conditions on the quality of tomographic reconstruction by coupling fast analytical adaptive optics simulation to a large database of 10 691 high resolution turbulence profiles measured over two years by the Stereo-SCIDAR instrument at ESO Paranal, Chile. This work represents the first investigation of these effects with a large, statistically significant sample of turbulence profiles. The statistical nature of the study allows us to assess not only the degradation and variability in tomographic error with a set of system parameters (e.g. number of layers, temporal update period) but also the required parameters to meet some error threshold. In the most challenging conditions where the profile is rapidly changing, these parameters must be far more tightly constrained in order to meet this threshold. By providing estimates of these constraints for a wide range of system geometries as well as the impact of different temporal optimisation strategies we may assist the designers of tomographic AO for the ELT to dimension their systems. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Comments: 13 pages, 13 figures. Accepted MNRAS March 2020

Characterisation of the ground layer of turbulence at Paranal using a robotic SLODAR system

Authors: T. Butterley, R. W. Wilson, M. Sarazin, C. M. Dubbeldam, J. Osborn, P. Clark

Abstract: We describe the implementation of a robotic SLODAR instrument at the Cerro Paranal observatory. The instrument measures the vertical profile of the optical atmospheric turbulence strength, in 8 resolution elements, to a maximum altitude ranging between 100 m and 500 m. We present statistical results of measurements of the turbulence profile on a total of 875 nights between 2014 and 2018. The verti… ▽ More We describe the implementation of a robotic SLODAR instrument at the Cerro Paranal observatory. The instrument measures the vertical profile of the optical atmospheric turbulence strength, in 8 resolution elements, to a maximum altitude ranging between 100 m and 500 m. We present statistical results of measurements of the turbulence profile on a total of 875 nights between 2014 and 2018. The vertical profile of the ground layer of turbulence is very varied, but in the median case most of the turbulence strength in the ground layer is concentrated within the first 50 m altitude, with relatively weak turbulence at higher altitudes up to 500 m. We find good agreement between measurements of the seeing angle from the SLODAR and from the Paranal DIMM seeing monitor, and also for seeing values extracted from the Shack-Hartmann active optics sensor of VLT UT1, adjusting for the height of each instrument above ground level. The SLODAR data suggest that a median improvement in the seeing angle from 0.689 arcsec to 0.481 arcsec at wavelength 500 nm would be obtained by fully correcting the ground-layer turbulence between the height of the UTs (taken as 10 m) and altitude 500 m. △ Less

Submitted 10 December, 2019; originally announced December 2019.

Atmospheric Scintillation Noise in Ground-Based Exoplanet Photometry

Authors: D. Föhring, R. W. Wilson, J. Osborn, V. S. Dhillon

Abstract: Atmospheric scintillation caused by optical turbulence in the Earth's atmosphere can be the dominant source of noise in ground-based photometric observations of bright targets, which is a particular concern for ground-based exoplanet transit photometry. We demonstrate the implications of atmospheric scintillation for exoplanet transit photometry through contemporaneous turbulence profiling and tra… ▽ More Atmospheric scintillation caused by optical turbulence in the Earth's atmosphere can be the dominant source of noise in ground-based photometric observations of bright targets, which is a particular concern for ground-based exoplanet transit photometry. We demonstrate the implications of atmospheric scintillation for exoplanet transit photometry through contemporaneous turbulence profiling and transit observations. We find a strong correlation between measured intensity variations and scintillation determined through optical turbulence profiling. This correlation indicates that turbulence profiling can be used to accurately model the amount of scintillation noise present in photometric observations on another telescope at the same site. We examine the conditions under which scintillation correction would be beneficial for transit photometry through turbulence profiling, and find that for the atmosphere of La Palma, scintillation dominates for bright targets of magnitude above $V\sim10.1$ mag for a 0.5~m telescope, and at $V\sim11.7$ mag for a 4.2 m telescope under median atmospheric conditions. Through Markov-chain Monte Carlo methods we examine the effect of scintillation noise on the uncertainty of the measured exoplanet parameters, and determine the regimes where scintillation correction is especially beneficial. The ability to model the amount of noise in observations due to scintillation, given an understanding of the atmosphere, is a crucial test for our understanding of scintillation and the overall noise budget of our observations. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Comments: Accepted for publication in MNRAS. 12 pages, 13 figures

Identifying optical turbulence profiles for realistic tomographic error in adaptive optics

Authors: O. J. D. Farley, J. Osborn, T. Morris, T. Fusco, B. Neichel, C. Correia, R. W. Wilson

Abstract: For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conve… ▽ More For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conventionally, a small number of reference profiles are used to obtain this error in simulation however these profiles are not constructed to be representative in terms of tomographic error. It is therefore unknown whether these simulations are providing realistic performance estimates. Here, we employ analytical adaptive optics simulation that drastically reduces computation times to compute tomographic error for 10 691 measurements of the turbulence profile gathered by the Stereo-SCIDAR instrument at ESO Paranal. We assess for the first time the impact of the profile on tomographic error in a statistical manner. We find, in agreement with previous work, that the tomographic error is most directly linked with the distribution of turbulence into discrete, stratified layers. Reference profiles are found to provide mostly higher tomographic error than expected, which we attribute to the fact that these profiles are primarily composed of averages of many measurements resulting in unrealistic, continuous distributions of turbulence. We propose that a representative profile should be defined with respect to a particular system, and that as such simulations with a large statistical sample of profiles must be an important step in the design process. △ Less

Submitted 8 June, 2019; originally announced June 2019.

Comments: Accepted MNRAS June 2019

The PDS 110 observing campaign - photometric and spectroscopic observations reveal eclipses are aperiodic

Authors: Hugh P. Osborn, Matthew Kenworthy, Joseph E. Rodriguez, Ernst J. W. de Mooij, Grant M. Kennedy, Howard Relles, Edward Gomez, Michael Hippke, Massimo Banfi, Lorenzo Barbieri, Igor Becker, Paul Benni, Perry Berlind, Allyson Bieryla, Giacomo Bonnoli, Hubert Boussier, Stephen Brincat, John Briol, Matthew Burleigh, Tim Butterley, Michael L. Calkins, Paul Chote, Simona Ciceri, Marc Deldem, Vik S. Dhillon , et al. (49 additional authors not shown)

Abstract: PDS 110 is a young disk-hosting star in the Orion OB1A association. Two dimming events of similar depth and duration were seen in 2008 (WASP) and 2011 (KELT), consistent with an object in a closed periodic orbit. In this paper we present data from a ground-based observing campaign designed to measure the star both photometrically and spectroscopically during the time of predicted eclipse in Septem… ▽ More PDS 110 is a young disk-hosting star in the Orion OB1A association. Two dimming events of similar depth and duration were seen in 2008 (WASP) and 2011 (KELT), consistent with an object in a closed periodic orbit. In this paper we present data from a ground-based observing campaign designed to measure the star both photometrically and spectroscopically during the time of predicted eclipse in September 2017. Despite high-quality photometry, the predicted eclipse did not occur, although coherent structure is present suggesting variable amounts of stellar flux or dust obscuration. We also searched for RV oscillations caused by any hypothetical companion and can rule out close binaries to 0.1 $M_\odot$. A search of Sonneberg plate archive data also enabled us to extend the photometric baseline of this star back more than 50 years, and similarly does not re-detect any deep eclipses. Taken together, they suggest that the eclipses seen in WASP and KELT photometry were due to aperiodic events. It would seem that PDS 110 undergoes stochastic dimmings that are shallower and shorter-duration than those of UX Ori variables, but may have a similar mechanism. △ Less

Submitted 23 January, 2019; originally announced January 2019.

Comments: Accepted to MNRAS; 12 pages, 7 figures; Supplementary photometric data in zipped latex source as all_photometry.csv

Full orbital solution for the binary system in the northern Galactic disc microlensing event Gaia16aye

Authors: Łukasz Wyrzykowski, P. Mróz, K. A. Rybicki, M. Gromadzki, Z. Kołaczkowski, M. Zieliński, P. Zieliński, N. Britavskiy, A. Gomboc, K. Sokolovsky, S. T. Hodgkin, L. Abe, G. F. Aldi, A. AlMannaei, G. Altavilla, A. Al Qasim, G. C. Anupama, S. Awiphan, E. Bachelet, V. Bakıs, S. Baker, S. Bartlett, P. Bendjoya, K. Benson, I. F. Bikmaev , et al. (160 additional authors not shown)

Abstract: Gaia16aye was a binary microlensing event discovered in the direction towards the northern Galactic disc and was one of the first microlensing events detected and alerted to by the Gaia space mission. Its light curve exhibited five distinct brightening episodes, reaching up to I=12 mag, and it was covered in great detail with almost 25,000 data points gathered by a network of telescopes. We presen… ▽ More Gaia16aye was a binary microlensing event discovered in the direction towards the northern Galactic disc and was one of the first microlensing events detected and alerted to by the Gaia space mission. Its light curve exhibited five distinct brightening episodes, reaching up to I=12 mag, and it was covered in great detail with almost 25,000 data points gathered by a network of telescopes. We present the photometric and spectroscopic follow-up covering 500 days of the event evolution. We employed a full Keplerian binary orbit microlensing model combined with the motion of Earth and Gaia around the Sun to reproduce the complex light curve. The photometric data allowed us to solve the microlensing event entirely and to derive the complete and unique set of orbital parameters of the binary lensing system. We also report on the detection of the first-ever microlensing space-parallax between the Earth and Gaia located at L2. The properties of the binary system were derived from microlensing parameters, and we found that the system is composed of two main-sequence stars with masses 0.57$\pm$0.05 $M_\odot$ and 0.36$\pm$0.03 $M_\odot$ at 780 pc, with an orbital period of 2.88 years and an eccentricity of 0.30. We also predict the astrometric microlensing signal for this binary lens as it will be seen by Gaia as well as the radial velocity curve for the binary system. Events such as Gaia16aye indicate the potential for the microlensing method of probing the mass function of dark objects, including black holes, in directions other than that of the Galactic bulge. This case also emphasises the importance of long-term time-domain coordinated observations that can be made with a network of heterogeneous telescopes. △ Less

Submitted 28 October, 2019; v1 submitted 22 January, 2019; originally announced January 2019.

Comments: accepted for publication in A&A, 24 pages, 10 figures, tables with the data will be available electronically

Journal ref: A&A 633, A98 (2020)

Optimizing the accuracy and efficiency of optical turbulence profiling using adaptive optics telemetry for extremely large telescopes

Authors: Douglas J Laidlaw, James Osborn, Timothy J Morris, Alastair G Basden, Olivier Beltramo-Martin, Timothy Butterley, Eric Gendron, Andrew P Reeves, Gérard Rousset, Matthew J Townson, Richard W Wilson

Abstract: Advanced adaptive optics (AO) instruments on ground-based telescopes require accurate knowledge of the atmospheric turbulence strength as a function of altitude. This information assists point spread function reconstruction, AO temporal control techniques and is required by wide-field AO systems to optimize the reconstruction of an observed wavefront. The variability of the atmosphere makes it imp… ▽ More Advanced adaptive optics (AO) instruments on ground-based telescopes require accurate knowledge of the atmospheric turbulence strength as a function of altitude. This information assists point spread function reconstruction, AO temporal control techniques and is required by wide-field AO systems to optimize the reconstruction of an observed wavefront. The variability of the atmosphere makes it important to have a measure of the optical turbulence profile in real time. This measurement can be performed by fitting an analytically generated covariance matrix to the cross-covariance of Shack-Hartmann wavefront sensor (SHWFS) centroids. In this study we explore the benefits of reducing cross-covariance data points to a covariance map region of interest (ROI). A technique for using the covariance map ROI to measure and compensate for SHWFS misalignments is also introduced. We compare the accuracy of covariance matrix and map ROI optical turbulence profiling using both simulated and on-sky data from CANARY, an AO demonstrator on the 4.2 m William Herschel telescope, La Palma. On-sky CANARY results are compared to contemporaneous profiles from Stereo-SCIDAR - a dedicated high-resolution optical turbulence profiler. It is shown that the covariance map ROI optimizes the accuracy of AO telemetry optical turbulence profiling. In addition, we show that the covariance map ROI reduces the fitting time for an extremely large telescope-scale system by a factor of 72. The software package we developed to collect all of the presented results is now open source. △ Less

Submitted 17 January, 2019; originally announced January 2019.

Journal ref: Published in MNRAS, 483, 4, 4341-4353, 2018

Representative optical turbulence profiles for ESO Paranal by hierarchical clustering

Authors: O. J. D. Farley, J. Osborn, T. Morris, M. Sarazin, T. Butterley, M. J. Townson, P. Jia, R. W. Wilson

Abstract: Knowledge of the optical turbulence profile is important in adaptive optics (AO) systems, particularly tomographic AO systems such as those to be employed by the next generation of 40 m class extremely large telescopes (ELTs). Site characterisation and monitoring campaigns have produced large quantities of turbulence profiling data for sites around the world. However AO system design and performan… ▽ More Knowledge of the optical turbulence profile is important in adaptive optics (AO) systems, particularly tomographic AO systems such as those to be employed by the next generation of 40 m class extremely large telescopes (ELTs). Site characterisation and monitoring campaigns have produced large quantities of turbulence profiling data for sites around the world. However AO system design and performance characterisation is dependent on Monte-Carlo simulations that cannot make use of these large datasets due to long computation times. Here we address the question of how to reduce these large datasets into small sets of profiles that can feasibly be used in such Monte-Carlo simulations, whilst minimising the loss of information inherent in this effective compression of the data. We propose hierarchical clustering to partition the dataset according to the structure of the turbulence profiles and extract a single profile from each cluster. This method is applied to the Stereo-SCIDAR dataset from ESO Paranal containing over 10000 measurements of the turbulence profile from 83 nights. We present two methods of extracting turbulence profiles from the clusters, resulting in two sets of 18 profiles providing subtly different descriptions of the variability across the entire dataset. For generality we choose integrated parameters of the turbulence to measure the representativeness of our profiles and compare to others. Using these criterion we also show that such variability is difficult to capture with small sets of profiles associated with integrated turbulence parameters such as seeing. △ Less

Submitted 20 September, 2018; originally announced September 2018.

Comments: Accepted MNRAS September 2018

Optical turbulence profiling with Stereo-SCIDAR for VLT and ELT

Authors: J. Osborn, R. W. Wilson, M. Sarazin, T. Butterley, A. Chacón, F. Derie, O. J. D. Farley, X. Haubois, D. Laidlaw, M. LeLouarn, E. Masciadri, J. Milli, J. Navarrete, M. J. Townson

Abstract: Knowledge of the Earth's atmospheric optical turbulence is critical for astronomical instrumentation. Not only does it enable performance verification and optimisation of existing systems but it is required for the design of future instruments. As a minimum this includes integrated astro-atmospheric parameters such as seeing, coherence time and isoplanatic angle, but for more sophisticated systems… ▽ More Knowledge of the Earth's atmospheric optical turbulence is critical for astronomical instrumentation. Not only does it enable performance verification and optimisation of existing systems but it is required for the design of future instruments. As a minimum this includes integrated astro-atmospheric parameters such as seeing, coherence time and isoplanatic angle, but for more sophisticated systems such as wide field adaptive optics enabled instrumentation the vertical structure of the turbulence is also required. Stereo-SCIDAR is a technique specifically designed to characterise the Earth's atmospheric turbulence with high altitude resolution and high sensitivity. Together with ESO, Durham University has commissioned a Stereo-SCIDAR instrument at Cerro Paranal, Chile, the site of the Very Large Telescope (VLT), and only 20~km from the site of the future Extremely Large Telescope (ELT). Here we provide results from the first 18 months of operation at ESO Paranal including instrument comparisons and atmospheric statistics. Based on a sample of 83 nights spread over 22 months covering all seasons, we find the median seeing to be 0.64" with 50% of the turbulence confined to an altitude below 2 km and 40% below 600 m. The median coherence time and isoplanatic angle are found as 4.18 ms and 1.75" respectively. A substantial campaign of inter-instrument comparison was also undertaken to assure the validity of the data. The Stereo-SCIDAR profiles (optical turbulence strength and velocity as a function of altitude) have been compared with the Surface-Layer SLODAR, MASS-DIMM and the ECMWF weather forecast model. The correlation coefficients are between 0.61 (isoplanatic angle) and 0.84 (seeing). △ Less

Submitted 7 June, 2018; originally announced June 2018.

Journal ref: Published in MNRAS, 478, 1, 825-834, 2018 https://academic.oup.com/mnras/article-abstract/478/1/825/4987879

The SUrvey for Pulsars and Extragalactic Radio Bursts II: New FRB discoveries and their follow-up

Authors: S. Bhandari, E. F. Keane, E. D. Barr, A. Jameson, E. Petroff, S. Johnston, M. Bailes, N. D. R. Bhat, M. Burgay, S. Burke-Spolaor, M. Caleb, R. P. Eatough, C. Flynn, J. A. Green, F. Jankowski, M. Kramer, V. Venkatraman Krishnan, V. Morello, A. Possenti, B. Stappers, C. Tiburzi, W. van Straten, I. Andreoni, T. Butterley, P. Chandra , et al. (25 additional authors not shown)

Abstract: We report the discovery of four Fast Radio Bursts (FRBs) in the ongoing SUrvey for Pulsars and Extragalactic Radio Bursts (SUPERB) at the Parkes Radio Telescope: FRBs 150610, 151206, 151230 and 160102. Our real-time discoveries have enabled us to conduct extensive, rapid multi-messenger follow-up at 12 major facilities sensitive to radio, optical, X-ray, gamma-ray photons and neutrinos on time sca… ▽ More We report the discovery of four Fast Radio Bursts (FRBs) in the ongoing SUrvey for Pulsars and Extragalactic Radio Bursts (SUPERB) at the Parkes Radio Telescope: FRBs 150610, 151206, 151230 and 160102. Our real-time discoveries have enabled us to conduct extensive, rapid multi-messenger follow-up at 12 major facilities sensitive to radio, optical, X-ray, gamma-ray photons and neutrinos on time scales ranging from an hour to a few months post-burst. No counterparts to the FRBs were found and we provide upper limits on afterglow luminosities. None of the FRBs were seen to repeat. Formal fits to all FRBs show hints of scattering while their intrinsic widths are unresolved in time. FRB 151206 is at low Galactic latitude, FRB 151230 shows a sharp spectral cutoff, and FRB 160102 has the highest dispersion measure (DM = $2596.1\pm0.3$ pc cm$^{-3}$) detected to date. Three of the FRBs have high dispersion measures (DM >$1500$ pc cm$^{-3}$), favouring a scenario where the DM is dominated by contributions from the Intergalactic Medium. The slope of the Parkes FRB source counts distribution with fluences $>2$ Jyms is $α=-2.2^{+0.6}_{-1.2}$ and still consistent with a Euclidean distribution ($α=-3/2$). We also find that the all-sky rate is $1.7^{+1.5}_{-0.9}\times10^3$FRBs/($4π$ sr)/day above $\sim2$ Jyms and there is currently no strong evidence for a latitude-dependent FRB sky-rate. △ Less

Submitted 21 November, 2017; originally announced November 2017.

Comments: 21 pages, 8 figures and accepted for publication in MNRAS

Turbulence velocity profiling for high sensitivity and vertical-resolution atmospheric characterization with Stereo-SCIDAR

Authors: J. Osborn, T. Butterley, M. J. Townson, A. P. Reeves, T. J. Morris, R. W. Wilson

Abstract: As telescopes become larger, into the era of ~40 m Extremely Large Telescopes, the high- resolution vertical profile of the optical turbulence strength is critical for the validation, optimization and operation of optical systems. The velocity of atmospheric optical turbulence is an important parameter for several applications including astronomical adaptive optics systems. Here, we compare the ve… ▽ More As telescopes become larger, into the era of ~40 m Extremely Large Telescopes, the high- resolution vertical profile of the optical turbulence strength is critical for the validation, optimization and operation of optical systems. The velocity of atmospheric optical turbulence is an important parameter for several applications including astronomical adaptive optics systems. Here, we compare the vertical profile of the velocity of the atmospheric wind above La Palma by means of a comparison of Stereo-SCIntillation Detection And Ranging (Stereo- SCIDAR) with the Global Forecast System models and nearby balloon-borne radiosondes. We use these data to validate the automated optical turbulence velocity identification from the Stereo-SCIDAR instrument mounted on the 2.5 m Isaac Newton Telescope, La Palma. By comparing these data we infer that the turbulence velocity and the wind velocity are consistent and that the automated turbulence velocity identification of the Stereo-SCIDAR is precise. The turbulence velocities can be used to increase the sensitivity of the turbulence strength profiles, as weaker turbulence that may be misinterpreted as noise can be detected with a velocity vector. The turbulence velocities can also be used to increase the altitude resolution of a detected layer, as the altitude of the velocity vectors can be identified to a greater precision than the native resolution of the system. We also show examples of complex velocity structure within a turbulent layer caused by wind shear at the interface of atmospheric zones. △ Less

Submitted 10 January, 2017; originally announced January 2017.

Comments: Published in MNRAS, 464, 3998-4007, 2017

Journal ref: MNRAS 464, 3998-4007, 2017

Hunting For Eclipses: High Speed Observations of Cataclysmic Variables

Authors: Liam K Hardy, Martin J McAllister, Vik S Dhillon, Stuart P Littlefair, Madelon C P Bours, Elme Breedt, Tim Butterley, Anurak Chakpor, Puji Irawati, Paul Kerry, Tom R Marsh, Steven G Parsons, Chris D J Savoury, Richard W Wilson, Patrick A Woudt

Abstract: We present new time-resolved photometry of 74 cataclysmic variables (CVs), 47 of which are eclipsing. 13 of these eclipsing systems are newly discovered. For all 47 eclipsing systems we show high cadence (1-20 seconds) light curves obtained with the high-speed cameras ultracam and ultraspec. We provide new or refined ephemerides, and supply mid-eclipse times for all observed eclipses. We assess th… ▽ More We present new time-resolved photometry of 74 cataclysmic variables (CVs), 47 of which are eclipsing. 13 of these eclipsing systems are newly discovered. For all 47 eclipsing systems we show high cadence (1-20 seconds) light curves obtained with the high-speed cameras ultracam and ultraspec. We provide new or refined ephemerides, and supply mid-eclipse times for all observed eclipses. We assess the potential for light curve modelling of all 47 eclipsing systems to determine their system parameters, finding 20 systems which appear to be suitable for future study. △ Less

Submitted 23 November, 2016; originally announced November 2016.

Comments: 33 pages (incl 17 pages appendices), 37 figures (incl 25 in appendices), accepted on 22nd November 2016 for publication in MNRAS

SWARM: A 32 GHz Correlator and VLBI Beamformer for the Submillimeter Array

Authors: Rurik A. Primiani, Kenneth H. Young, André Young, Nimesh Patel, Robert W. Wilson, Laura Vertatschitsch, Billie B. Chitwood, Ranjani Srinivasan, David MacMahon, Jonathan Weintroub

Abstract: A 32 GHz bandwidth VLBI capable correlator and phased array has been designed and deployed at the Smithsonian Astrophysical Observatory's Submillimeter Array (SMA). The SMA Wideband Astronomical ROACH2 Machine (SWARM) integrates two instruments: a correlator with 140 kHz spectral resolution across its full 32 GHz band, used for connected interferometric observations, and a phased array summer used… ▽ More A 32 GHz bandwidth VLBI capable correlator and phased array has been designed and deployed at the Smithsonian Astrophysical Observatory's Submillimeter Array (SMA). The SMA Wideband Astronomical ROACH2 Machine (SWARM) integrates two instruments: a correlator with 140 kHz spectral resolution across its full 32 GHz band, used for connected interferometric observations, and a phased array summer used when the SMA participates as a station in the Event Horizon Telescope (EHT) Very Long Baseline Interferometry (VLBI) array. For each SWARM quadrant, Reconfigurable Open Architecture Computing Hardware (ROACH2) units shared under open source from the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) are equipped with a pair of ultra-fast Analog-to- Digital Converters (ADCs), a Field Programmable Gate Array (FPGA) processor, and eight 10 Gigabit Ethernet ports. A VLBI data recorder interface designated the SWARM Digital Back End, or SDBE, is implemented with a ninth ROACH2 per quadrant, feeding four Mark6 VLBI recorders with an aggregate recording rate of 64 Gbps. This paper describes the design and implementation of SWARM, as well as its deployment at SMA with reference to verification and science data. △ Less

Submitted 8 November, 2016; originally announced November 2016.

Comments: 21 pages, 12 figures, pdflatex, accepted for publication in the Journal of Astronomical Instrumentation

Flares, wind and nebulae: the 2015 December mini-outburst of V404 Cygni

Authors: T. Muñoz-Darias, J. Casares, D. Mata Sánchez, R. P. Fender, M. Armas Padilla, K. Mooley, L. Hardy, P. A. Charles, G. Ponti, S. E. Motta, V. S. Dhillon, P. Gandhi, F. Jiménez-Ibarra, T. Butterley, S. Carey, K. J. B. Grainge, J. Hickish, S. P. Littlefair, Y. C. Perrott, N. Razavi-Ghods, C. Rumsey, A. M. M. Scaife, P. F. Scott, D. J. Titterington, R. W. Wilson

Abstract: After more than 26 years in quiescence, the black hole transient V404 Cyg went into a luminous outburst in June 2015, and additional activity was detected in late December of the same year. Here, we present an optical spectroscopic follow-up of the December mini-outburst, together with X-ray, optical and radio monitoring that spanned more than a month. Strong flares with gradually increasing inten… ▽ More After more than 26 years in quiescence, the black hole transient V404 Cyg went into a luminous outburst in June 2015, and additional activity was detected in late December of the same year. Here, we present an optical spectroscopic follow-up of the December mini-outburst, together with X-ray, optical and radio monitoring that spanned more than a month. Strong flares with gradually increasing intensity are detected in the three spectral ranges during the ~10 days following the Swift trigger. Our optical spectra reveal the presence of a fast outflowing wind, as implied by the detection of a P-Cyg profile (He I - 5876 A) with a terminal velocity of ~2500 km/s. Nebular-like spectra -- with an H_alpha equivalent width of ~500 A -- are also observed. All these features are similar to those seen during the main June 2015 outburst. Thus, the fast optical wind simultaneous with the radio jet is most likely present in every V404 Cyg outburst. Finally, we report on the detection of a strong radio flare in late January 2016, when X-ray and optical monitoring had stopped due to Sun constraints. △ Less

Submitted 26 October, 2016; originally announced October 2016.

Comments: To be published in MNRAS Letters

Long-Term Photometry of IC 348 with the YETI Network

Authors: D. J. Fritzewski, M. Kitze, M. Mugrauer, R. Neuhäuser, C. Adam, C. Briceño, S. Buder, T. Butterley, W. -P. Chen, B. Dinçel, V. S. Dhillon, R. Errmann, Z. Garai, H. F. W. Gilbert, C. Ginski, J. Greif, L. K. Hardy, J. Hernández, P. C. Huang, A. Kellerer, E. Kundra, S. P. Littlefair, M. Mallonn, C. Marka, A. Pannicke , et al. (7 additional authors not shown)

Abstract: We present long-term photometric observations of the young open cluster IC 348 with a baseline time-scale of 2.4 yr. Our study was conducted with several telescopes from the Young Exoplanet Transit Initiative (YETI) network in the Bessel $R$ band to find periodic variability of young stars. We identified 87 stars in IC 348 to be periodically variable; 33 of them were unreported before. Additionall… ▽ More We present long-term photometric observations of the young open cluster IC 348 with a baseline time-scale of 2.4 yr. Our study was conducted with several telescopes from the Young Exoplanet Transit Initiative (YETI) network in the Bessel $R$ band to find periodic variability of young stars. We identified 87 stars in IC 348 to be periodically variable; 33 of them were unreported before. Additionally, we detected 61 periodic non-members of which 41 are new discoveries. Our wide field of view was the key to those numerous newly found variable stars. The distribution of rotation periods in IC 348 has always been of special interest. We investigate it further with our newly detected periods but we cannot find a statistically significant bimodality. We also report the detection of a close eclipsing binary in IC 348 composed of a low-mass stellar component ($M \gtrsim 0.09\,\mathrm{M}_{\odot}$) and a K0 pre-main sequence star ($M \approx 2.7\,\mathrm{M}_{\odot}$). Furthermore, we discovered three detached binaries among the background stars in our field of view and confirmed the period of a fourth one. △ Less

Submitted 21 July, 2016; originally announced July 2016.

Comments: Accepted for publication in MNRAS, 23 pages, 16 figures, 5 tables

HiPERCAM: A high-speed, quintuple-beam CCD camera for the study of rapid variability in the Universe

Authors: V. S. Dhillon, T. R. Marsh, N. Bezawada, M. Black, S. Dixon, T. Gamble, D. Henry, P. Kerry, S. P. Littlefair, D. W. Lunney, T. Morris, J. Osborn, R. W. Wilson

Abstract: HiPERCAM is a high-speed camera for the study of rapid variability in the Universe. The project is funded by a 3.5MEuro European Research Council Advanced Grant. HiPERCAM builds on the success of our previous instrument, ULTRACAM, with very significant improvements in performance thanks to the use of the latest technologies. HiPERCAM will use 4 dichroic beamsplitters to image simultaneously in 5 o… ▽ More HiPERCAM is a high-speed camera for the study of rapid variability in the Universe. The project is funded by a 3.5MEuro European Research Council Advanced Grant. HiPERCAM builds on the success of our previous instrument, ULTRACAM, with very significant improvements in performance thanks to the use of the latest technologies. HiPERCAM will use 4 dichroic beamsplitters to image simultaneously in 5 optical channels covering the u'g'r'i'z' bands. Frame rates of over 1000 per second will be achievable using an ESO CCD controller (NGC), with every frame GPS timestamped. The detectors are custom-made, frame-transfer CCDs from e2v, with 4 low-noise (2.5e-) outputs, mounted in small thermoelectrically-cooled heads operated at 180 K, resulting in virtually no dark current. The two reddest CCDs will be deep-depletion devices with anti-etaloning, providing high quantum efficiencies across the red part of the spectrum with no fringing. The instrument will also incorporate scintillation noise correction via the conjugate-plane photometry technique. The opto-mechanical chassis will make use of additive manufacturing techniques in metal to make a light-weight, rigid and temperature-invariant structure. First light is expected on the 4.2m William Herschel Telescope on La Palma in 2017 (on which the field of view will be 10' with a 0.3"/pixel scale), with subsequent use planned on the 10.4m Gran Telescopio Canarias on La Palma (on which the field of view will be 4' with a 0.11"/pixel scale) and the 3.5m New Technology Telescope in Chile. △ Less

Submitted 29 June, 2016; originally announced June 2016.

Comments: 9 pages, 8 figures, 1 table, SPIE Astronomical Telescopes and Instrumentation, Edinburgh (26 June - 1 July, 2016)

Long-term eclipse timing of white dwarf binaries: an observational hint of a magnetic mechanism at work

Authors: M. C. P. Bours, T. R. Marsh, S. G. Parsons, V. S. Dhillon, R. P. Ashley, J. P. Bento, E. Breedt, T. Butterley, C. Caceres, C. M. Copperwheat, L. K. Hardy, J. J. Hermes, P. Irawati, P. Kerry, D. Kilkenny, S. P. Littlefair, M. J. McAllister, S. Rattanasoon, D. I. Sahman, M. Vuckovic, R. W. Wilson

Abstract: We present a long-term programme for timing the eclipses of white dwarfs in close binaries to measure apparent and/or real variations in their orbital periods. Our programme includes 67 close binaries, both detached and semi-detached and with M-dwarfs, K-dwarfs, brown dwarfs or white dwarfs secondaries. In total, we have observed more than 650 white dwarf eclipses. We use this sample to search for… ▽ More We present a long-term programme for timing the eclipses of white dwarfs in close binaries to measure apparent and/or real variations in their orbital periods. Our programme includes 67 close binaries, both detached and semi-detached and with M-dwarfs, K-dwarfs, brown dwarfs or white dwarfs secondaries. In total, we have observed more than 650 white dwarf eclipses. We use this sample to search for orbital period variations and aim to identify the underlying cause of these variations. We find that the probability of observing orbital period variations increases significantly with the observational baseline. In particular, all binaries with baselines exceeding 10 yrs, with secondaries of spectral type K2 -- M5.5, show variations in the eclipse arrival times that in most cases amount to several minutes. In addition, among those with baselines shorter than 10 yrs, binaries with late spectral type (>M6), brown dwarf or white dwarf secondaries appear to show no orbital period variations. This is in agreement with the so-called Applegate mechanism, which proposes that magnetic cycles in the secondary stars can drive variability in the binary orbits. We also present new eclipse times of NN Ser, which are still compatible with the previously published circumbinary planetary system model, although only with the addition of a quadratic term to the ephemeris. Finally, we conclude that we are limited by the relatively short observational baseline for many of the binaries in the eclipse timing programme, and therefore cannot yet draw robust conclusions about the cause of orbital period variations in evolved, white dwarf binaries. △ Less

Submitted 2 June, 2016; originally announced June 2016.

Comments: 16 pages, 12 figures

Nonlinear looped band structure of Bose-Einstein condensates in an optical lattice

Authors: Silvio B. Koller, Elizabeth A. Goldschmidt, Roger C. Brown, Robert Wyllie, Ryan W. Wilson, James, V. Porto

Abstract: We study experimentally the stability of excited, interacting states of bosons in a double-well optical lattice in regimes where the nonlinear interactions are expected to induce "swallowtail" looped band structure. By carefully preparing different initial coherent states and observing their subsequent decay, we observe distinct decay rates that provide direct evidence for multivalued, looped band… ▽ More We study experimentally the stability of excited, interacting states of bosons in a double-well optical lattice in regimes where the nonlinear interactions are expected to induce "swallowtail" looped band structure. By carefully preparing different initial coherent states and observing their subsequent decay, we observe distinct decay rates that provide direct evidence for multivalued, looped band structure. The double well lattice both stabilizes the looped band structure and allows for dynamic preparation of different initial states, including states within the loop structure. We confirm our state preparation procedure with dynamic Gross-Pitaevskii calculations. The excited loop states are found to be more stable than dynamically unstable ground states, but decay faster than expected based on a mean-field stability calculation, indicating the importance of correlations beyond a mean field description. △ Less

Submitted 10 May, 2016; originally announced May 2016.

Comments: 6 pages, 6 figures

Journal ref: Phys. Rev. A 94, 063634 (2016)

Search for transiting exoplanets and variable stars in the open cluster NGC 7243

Authors: Z. Garai, T. Pribulla, L. Hambálek, R. Errmann, Ch. Adam, S. Buder, T. Butterley, V. S. Dhillon, B. Dincel, H. Gilbert, Ch. Ginski, L. K. Hardy, A. Kellerer, M. Kitze, E. Kundra, S. P. Littlefair, M. Mugrauer, J. Nedoroščík, R. Neuhäuser, A. Pannicke, S. Raetz, J. G. Schmidt, T. O. B. Schmidt, M. Seeliger, M. Vaňko , et al. (1 additional authors not shown)

Abstract: We report results of the first five observing campaigns for the open stellar cluster NGC 7243 in the frame of project Young Exoplanet Transit Initiative (YETI). The project focuses on the monitoring of young and nearby stellar clusters, with the aim to detect young transiting exoplanets, and to study other variability phenomena on time-scales from minutes to years. After five observing campaigns a… ▽ More We report results of the first five observing campaigns for the open stellar cluster NGC 7243 in the frame of project Young Exoplanet Transit Initiative (YETI). The project focuses on the monitoring of young and nearby stellar clusters, with the aim to detect young transiting exoplanets, and to study other variability phenomena on time-scales from minutes to years. After five observing campaigns and additional observations during 2013 and 2014, a clear and repeating transit-like signal was detected in the light curve of J221550.6+495611. Furthermore, we detected and analysed 37 new eclipsing binary stars in the studied region. The best fit parameters and light curves of all systems are given. Finally, we detected and analysed 26 new, presumably pulsating variable stars in the studied region. The follow-up investigation of these objects, including spectroscopic measurements of the exoplanet candidate, is currently planned. △ Less

Submitted 18 January, 2016; originally announced January 2016.

Comments: 25 pages, AN accepted

pt5m - a 0.5m robotic telescope on La Palma

Authors: L. K. Hardy, T. Butterley, V. S. Dhillon, S. P. Littlefair, R. W. Wilson

Abstract: pt5m is a 0.5m robotic telescope located on the roof of the 4.2m William Herschel Telescope (WHT) building, at the Roque de los Muchachos Observatory, La Palma. Using a 5-position filter wheel and CCD detector, and bespoke control software, pt5m provides a high quality robotic observing facility. The telescope first began robotic observing in 2012, and is now contributing to transient follow-up an… ▽ More pt5m is a 0.5m robotic telescope located on the roof of the 4.2m William Herschel Telescope (WHT) building, at the Roque de los Muchachos Observatory, La Palma. Using a 5-position filter wheel and CCD detector, and bespoke control software, pt5m provides a high quality robotic observing facility. The telescope first began robotic observing in 2012, and is now contributing to transient follow-up and time-resolved astronomical studies. In this paper we present the scientific motivation behind pt5m, as well as the specifications and unique features of the facility. We also present an example of the science we have performed with pt5m, where we measure the radius of the transiting exoplanet WASP-33b. We find a planetary radius of 1.603 +/- 0.014 R(J). △ Less

Submitted 29 September, 2015; originally announced September 2015.

Comments: 11 pages including 3 tables and 9 figures. Accepted for publication in MNRAS, September 2015

Total eclipse of the heart: The AM CVn Gaia14aae / ASSASN-14cn

Authors: H. C. Campbell, T. R. Marsh, M. Fraser, S. T. Hodgkin, E. de Miguel, B. T. Gänsicke, D. Steeghs, A. Hourihane, E. Breedt, S. P. Littlefair, S. E. Koposov, L. Wyrzykowski, G. Altavilla, N. Blagorodnova, G. Clementini, G. Damljanovic, A. Delgado, M. Dennefeld, A. J. Drake, J. Fernández-Hernández, G. Gilmore, R. Gualandi, A. Hamanowicz, B. Handzlik, L. K. Hardy , et al. (60 additional authors not shown)

Abstract: We report the discovery and characterisation of a deeply eclipsing AM CVn-system, Gaia14aae (= ASSASN-14cn). Gaia14aae was identified independently by the All-Sky Automated Survey for Supernovae (ASAS-SN; Shappee et al. 2014) and by the Gaia Science Alerts project, during two separate outbursts. A third outburst is seen in archival Pan-STARRS-1 (PS1; Schlafly et al. 2012; Tonry et al. 2012; Magnie… ▽ More We report the discovery and characterisation of a deeply eclipsing AM CVn-system, Gaia14aae (= ASSASN-14cn). Gaia14aae was identified independently by the All-Sky Automated Survey for Supernovae (ASAS-SN; Shappee et al. 2014) and by the Gaia Science Alerts project, during two separate outbursts. A third outburst is seen in archival Pan-STARRS-1 (PS1; Schlafly et al. 2012; Tonry et al. 2012; Magnier et al. 2013) and ASAS-SN data. Spectroscopy reveals a hot, hydrogen-deficient spectrum with clear double-peaked emission lines, consistent with an accreting double degenerate classification. We use follow-up photometry to constrain the orbital parameters of the system. We find an orbital period of 49.71 min, which places Gaia14aae at the long period extremum of the outbursting AM CVn period distribution. Gaia14aae is dominated by the light from its accreting white dwarf. Assuming an orbital inclination of 90 degrees for the binary system, the contact phases of the white dwarf lead to lower limits of 0.78 M solar and 0.015 M solar on the masses of the accretor and donor respectively and a lower limit on the mass ratio of 0.019. Gaia14aae is only the third eclipsing AM CVn star known, and the first in which the WD is totally eclipsed. Using a helium WD model, we estimate the accretor's effective temperature to be 12900+-200 K. The three out-burst events occurred within 4 months of each other, while no other outburst activity is seen in the previous 8 years of Catalina Real-time Transient Survey (CRTS; Drake et al. 2009), Pan-STARRS-1 and ASAS-SN data. This suggests that these events might be rebrightenings of the first outburst rather than individual events. △ Less

Submitted 16 July, 2015; originally announced July 2015.

Comments: 9

Atmospheric Scintillation in Astronomical Photometry

Authors: J. Osborn, D. Föhring, V. S. Dhillon, R. W. Wilson

Abstract: Scintillation noise due to the Earth's turbulent atmosphere can be a dominant noise source in high-precision astronomical photometry when observing bright targets from the ground. Here we describe the phenomenon of scintillation from its physical origins to its effect on photometry. We show that Young's (1967) scintillation-noise approximation used by many astronomers tends to underestimate the me… ▽ More Scintillation noise due to the Earth's turbulent atmosphere can be a dominant noise source in high-precision astronomical photometry when observing bright targets from the ground. Here we describe the phenomenon of scintillation from its physical origins to its effect on photometry. We show that Young's (1967) scintillation-noise approximation used by many astronomers tends to underestimate the median scintillation noise at several major observatories around the world. We show that using median atmospheric optical turbulence profiles, which are now available for most sites, provides a better estimate of the expected scintillation noise and that real-time turbulence profiles can be used to precisely characterise the scintillation noise component of contemporaneous photometric measurements. This will enable a better understanding and calibration of photometric noise sources and the effectiveness of scintillation correction techniques. We also provide new equations for calculating scintillation noise, including for extremely large telescopes where the scintillation noise will actually be lower than previously thought. These equations highlight the fact that scintillation noise and shot noise have the same dependence on exposure time and so if an observation is scintillation limited, it will be scintillation limited for all exposure times. The ratio of scintillation noise to shot noise is also only weakly dependent on telescope diameter and so a bigger telescope may not yield a reduction in fractional scintillation noise. △ Less

Submitted 23 June, 2015; originally announced June 2015.

Comments: 11 pages, 12 figures, accepted in MNRAS

Stereo-SCIDAR: Optical turbulence profiling with high sensitivity using a modified SCIDAR instrument

Authors: H. W. Shepherd, J. Osborn, R. W. Wilson, T. Butterley, R. Avila, V. S. Dhillon, T. J. Morris

Abstract: The next generation of adaptive optics (AO) systems will require tomographic reconstruction techniques to map the optical refractive index fluctuations, generated by the atmospheric turbulence, along the line of sight to the astronomical target. These systems can be enhanced with data from an external atmospheric profiler. This is important for Extremely Large Telescope scale tomography. Here we p… ▽ More The next generation of adaptive optics (AO) systems will require tomographic reconstruction techniques to map the optical refractive index fluctuations, generated by the atmospheric turbulence, along the line of sight to the astronomical target. These systems can be enhanced with data from an external atmospheric profiler. This is important for Extremely Large Telescope scale tomography. Here we propose a new instrument which utilises the generalised SCIntillation Detection And Ranging (SCIDAR) technique to allow high sensitivity vertical profiles of the atmospheric optical turbulence and wind velocity profile above astronomical observatories. The new approach, which we refer to as 'Stereo-SCIDAR', uses a stereoscopic system with the scintillation pattern from each star of a double-star target incident on a separate detector. Separating the pupil images for each star has several advantages including: increased magnitude difference tolerance for the target stars; negating the need for re-calibration due to the normalisation errors usually associated with SCIDAR; an increase of at least a factor of two in the signal-to-noise ratio of the cross-covariance function and hence the profile for equal magnitude target stars and up to a factor of 16 improvement for targets of 3 magnitudes difference; and easier real-time reconstruction of the wind-velocity profile. Theoretical response functions are calculated for the instrument, and the performance is investigated using a Monte-Carlo simulation. The technique is demonstrated using data recorded at the 2.5 m Nordic Optical Telescope and the 1.0 m Jacobus Kapteyn Telescope, both on La Palma. △ Less

Submitted 12 December, 2013; originally announced December 2013.

Comments: 11 pages, 11 figures, accepted by MNRAS 27/11/13

Journal ref: MNRAS, 437(4), 3568-3577, 2013

Finding compact hot subdwarf binaries in the Galactic disc

Authors: T. Kupfer, S. Geier, A. Faye McLeod, P. J. Groot, K. Verbeek, V. Schaffenroth, U. Heber, C. Heuser, E. Ziegerer, R. Østensen, P. Nemeth, V. S. Dhillon, T. Butterley, S. P. Littlefair, R. W. Wilson, J. H. Telting, A. Shporer, B. J. Fulton

Abstract: We started a new project which aims to find compact hot subdwarf binaries at low Galactic latitudes. Targets are selected from several photometric surveys and a spectroscopic follow-up campaign to find radial velocity variations on timescales as short as tens of minutes has been started. Once radial variations are detected phase-resolved spectroscopy is obtained to measure the radial velocity curv… ▽ More We started a new project which aims to find compact hot subdwarf binaries at low Galactic latitudes. Targets are selected from several photometric surveys and a spectroscopic follow-up campaign to find radial velocity variations on timescales as short as tens of minutes has been started. Once radial variations are detected phase-resolved spectroscopy is obtained to measure the radial velocity curve and the mass function of the system. The observing strategy is described and the discovery of two short period hot subdwarf binaries is presented. UVEXJ032855.25+503529.8 contains a hot subdwarf B star (sdB) orbited by a cool M-dwarf in a P=0.11017 days orbit. The lightcurve shows a strong reflection effect but no eclipses are visible. HS 1741+2133 is a short period (P=0.20 days) sdB most likely with a white dwarf (WD) companion. △ Less

Submitted 12 August, 2013; v1 submitted 11 August, 2013; originally announced August 2013.

Comments: 8 pages and 5 figures; to be published in the proceedings of the Sixth Meeting on Hot Subdwarf Stars and Related Objects

ULTRACAM z'-band Detection of the Secondary Eclipse of WASP-12b

Authors: D. Föhring, V. S. Dhillon, Nikku Madhusudhan, T. R. Marsh, C. M. Copperwheat, S. P. Littlefair, Richard W. Wilson

Abstract: We present z'-band secondary eclipse photometry of the highly irradiated hot Jupiter WASP-12b using ULTRACAM on the 4.2m William Herschel Telescope. We measure a decrease in flux of δ= 0.130+/-0.013% during the passage of the planet behind the star, which is significantly deeper than the previous measurement at this wavelength (0.082+/-0.015%, López-Morales et al. 2010). Our secondary eclipse is b… ▽ More We present z'-band secondary eclipse photometry of the highly irradiated hot Jupiter WASP-12b using ULTRACAM on the 4.2m William Herschel Telescope. We measure a decrease in flux of δ= 0.130+/-0.013% during the passage of the planet behind the star, which is significantly deeper than the previous measurement at this wavelength (0.082+/-0.015%, López-Morales et al. 2010). Our secondary eclipse is best fit with a mid-eclipse phase, φ, that is compatible with a circular orbit φ= 0.501+/-0.002, in agreement with previous results (Croll et al. 2011). In combination with existing data, our eclipse depth measurement allows us to constrain the characteristics of the planet's atmosphere, which is consistent with a carbon-rich model, with no evidence for a strong thermal inversion. If the difference in eclipse depth reported here compared to that of López-Morales et al. (2010) is of physical origin, as opposed to due to systematics, it may be caused by temporal variability in the flux, due to atmospheric dynamics. △ Less

Submitted 1 August, 2013; originally announced August 2013.

Comments: 6 pages, 4 figures, Accepted by MNRAS

The Digital Motion Control System for the Submillimeter Array Antennas

Authors: T. R. Hunter, R. W. Wilson, R. Kimberk, P. S. Leiker, N. A. Patel, R. Blundell, R. D. Christensen, A. R. Diven, J. Maute, R. J. Plante, P. Riddle, K. H. Young

Abstract: We describe the design and performance of the digital servo and motion control system for the 6-meter diameter parabolic antennas of the Submillimeter Array (SMA) on Mauna Kea, Hawaii. The system is divided into three nested layers operating at a different, appropriate bandwidth. (1) A rack-mounted, real-time Unix system runs the position loop which reads the high resolution azimuth and elevation… ▽ More We describe the design and performance of the digital servo and motion control system for the 6-meter diameter parabolic antennas of the Submillimeter Array (SMA) on Mauna Kea, Hawaii. The system is divided into three nested layers operating at a different, appropriate bandwidth. (1) A rack-mounted, real-time Unix system runs the position loop which reads the high resolution azimuth and elevation encoders and sends velocity and acceleration commands at 100 Hz to a custom-designed servo control board (SCB). (2) The microcontroller-based SCB reads the motor axis tachometers and implements the velocity loop by sending torque commands to the motor amplifiers at 558 Hz. (3) The motor amplifiers implement the torque loop by monitoring and sending current to the three-phase brushless drive motors at 20 kHz. The velocity loop uses a traditional proportional-integral-derivative (PID) control algorithm, while the position loop uses only a proportional term and implements a command shaper based on the Gauss error function. Calibration factors and software filters are applied to the tachometer feedback prior to the application of the servo gains in the torque computations. All of these parameters are remotely adjustable in software. The three layers of the control system monitor each other and are capable of shutting down the system safely if a failure or anomaly occurs. The Unix system continuously relays antenna status to the central observatory computer via reflective memory. In each antenna, a Palm Vx hand controller displays system status and allows full local control of the drives in an intuitive touchscreen user interface. It can also be connected outside the cabin for convenience during antenna reconfigurations. Excellent tracking performance (0.3 arcsec rms) is achieved with this system. It has been in reliable operation on 8 antennas for over 10 years and has required minimal maintenance. △ Less

Submitted 18 March, 2013; originally announced March 2013.

Comments: Accepted for publication in the Journal for Astronomical Instrumentation, 31 pages, 9 figures

Journal ref: Journal of Astronomical Instrumentation, Volume 2, Issue 1, id. 1350002-219, September 2013

A J-band detection of the sub-stellar mass donor in SDSS J1433+1011

Authors: S. P. Littlefair, C. D., J. Savoury, V. S. Dhillon, T. R. Marsh, B. T. Gaensicke, T. Butterley, R. W. Wilson, J. Southworth, C. A. Watson

Abstract: We present time-resolved J-band spectroscopy of the short period cataclysmic variable SDSS J143317.78+101123.3. We detect absorption lines from the sub-stellar donor star in this system, which contributes 38 +/- 5% to the J-band light. From the relative strengths of the absorption lines in the J-band, we estimate the spectral type of the donor star to be L2 +/- 1. These data are the first spectros… ▽ More We present time-resolved J-band spectroscopy of the short period cataclysmic variable SDSS J143317.78+101123.3. We detect absorption lines from the sub-stellar donor star in this system, which contributes 38 +/- 5% to the J-band light. From the relative strengths of the absorption lines in the J-band, we estimate the spectral type of the donor star to be L2 +/- 1. These data are the first spectroscopic detection of a confirmed sub-stellar donor in a cataclysmic variable, and the spectral type is consistent with that expected from semi-empirical evolutionary models. Using skew map**, we have been able to derive an estimate for the radial velocity of the donor of Kd = 520 +/- 60 km/s. This value is consistent with, though much less precise than, predictions from mass determinations found via photometric fitting of the eclipse light curves. △ Less

Submitted 4 March, 2013; originally announced March 2013.

Comments: 6 pages, 4 figures. Accepted for publication in Monthly Notices of the Royal Astronomical Society

A Multi-Baseline 12 GHz Atmospheric Phase Interferometer with One Micron Path Length Sensitivity

Authors: Robert S. Kimberk, Todd R. Hunter, Patrick S. Leiker, Raymond Blundell, George U. Nystrom, Glen R. Petitpas, John Test, Robert W. Wilson, Paul Yamaguchi, Kenneth H. Young

Abstract: We have constructed a five station 12 GHz atmospheric phase interferometer (API) for the Submillimeter Array (SMA) located near the summit of Mauna Kea, Hawaii. Operating at the base of unoccupied SMA antenna pads, each station employs a commercial low noise mixing block coupled to a 0.7 m off-axis satellite dish which receives a broadband, white noise-like signal from a geostationary satellite. T… ▽ More We have constructed a five station 12 GHz atmospheric phase interferometer (API) for the Submillimeter Array (SMA) located near the summit of Mauna Kea, Hawaii. Operating at the base of unoccupied SMA antenna pads, each station employs a commercial low noise mixing block coupled to a 0.7 m off-axis satellite dish which receives a broadband, white noise-like signal from a geostationary satellite. The signals are processed by an analog correlator to produce the phase delays between all pairs of stations with projected baselines ranging from 33 to 261 m. Each baseline's amplitude and phase is measured continuously at a rate of 8 kHz, processed, averaged and output at 10 Hz. Further signal processing and data reduction is accomplished with a Linux computer, including the removal of the diurnal motion of the target satellite. The placement of the stations below ground level with an environmental shield combined with the use of low temperature coefficient, buried fiber optic cables provides excellent system stability. The sensitivity in terms of rms path length is 1.3 microns which corresponds to phase deviations of about 1 degree of phase at the highest operating frequency of the SMA. The two primary data products are: (1) standard deviations of observed phase over various time scales, and (2) phase structure functions. These real-time statistical data measured by the API in the direction of the satellite provide an estimate of the phase front distortion experienced by the concurrent SMA astronomical observations. The API data also play an important role, along with the local opacity measurements and weather predictions, in hel** to plan the scheduling of science observations on the telescope. △ Less

Submitted 31 May, 2012; originally announced June 2012.

Comments: 23 pages, 10 figures, accepted for publication in the Journal of Astronomical Instrumentation

Journal ref: Journal of Astronomical Instrumentation, Volume 1, Issue 1, id. 1250002-1860, December 2012

Design and Performance of a Digital Phase Lock Loop for Gunn Oscillators

Authors: Todd R. Hunter, Robert Kimberk, Patrick Steve Leiker, Cheuk-Yu Edward Tong, Robert W. Wilson

Abstract: The digital phase lock loop described in this paper has been in use on the Submillimeter Array (SMA) front-end receivers for over a decade and has been a key element in obtaining all of the high quality images that have been published from this telescope over the years. The technical achievements enabled by these devices include the first phase closure observations in the 690 GHz band, the first a… ▽ More The digital phase lock loop described in this paper has been in use on the Submillimeter Array (SMA) front-end receivers for over a decade and has been a key element in obtaining all of the high quality images that have been published from this telescope over the years. The technical achievements enabled by these devices include the first phase closure observations in the 690 GHz band, the first attempts at band-to-band phase transfer at submillimeter wavelengths, and the first successful demonstration of interferometry using a fully photonic millimeter-wave local oscillator. Copies of these devices are also in place at the Caltech Submillimeter Observatory and the James Clerk Maxwell Telescope in support of the eSMA project and submillimeter VLBI experiments. Additional units of this design were used by the Princeton Millimeter Interferometer and the Microwave Anisotropy Telescope. In total, over three dozen units have been constructed and used in astronomical studies. In this paper, we briefly describe the background theory, design, performance, and calibration steps, and provide useful testing and repair information. △ Less

Submitted 7 January, 2011; originally announced January 2011.

Comments: 19 pages, 6 figures. This is mostly a superset of SMA technical memo #143 but with a new introduction and additional citations

Report number: SMA-TM-143

An Interferometric Spectral-line Survey of IRC+10216 in the 345 GHz Band

Authors: Nimesh A. Patel, Ken H. Young, Carl A. Gottlieb, Patrick Thaddeus, Robert W. Wilson, Karl M. Menten, Mark J. Reid, Michael C. McCarthy, Jose Cernicharo, **hua He, Sandra Bruenken, Dinh V. Trung, Eric Keto

Abstract: We report a spectral-line survey of the extreme carbon star IRC+10216 carried out between 293.9 and 354.8 GHz with the Submillimeter Array. A total of 442 lines were detected, more than 200 for the first time; 149 are unassigned. Maps at an angular resolution of ~3" were obtained for each line. A substantial new population of narrow lines with an expansion velocity of ~4 km/s (i.e. ~ 30% of the te… ▽ More We report a spectral-line survey of the extreme carbon star IRC+10216 carried out between 293.9 and 354.8 GHz with the Submillimeter Array. A total of 442 lines were detected, more than 200 for the first time; 149 are unassigned. Maps at an angular resolution of ~3" were obtained for each line. A substantial new population of narrow lines with an expansion velocity of ~4 km/s (i.e. ~ 30% of the terminal velocity) was detected. Most of these are attributed to rotational transitions within vibrationally excited states, emitted from energy levels above the v=0, J=0 ground state with excitation energy of 1000-3000 K. Emission from these lines appears to be centered on the star with an angular extent of <1". We use multiple transitions detected in several molecules to derive physical conditions in this inner envelope of IRC+10216. △ Less

Submitted 27 December, 2010; originally announced December 2010.

Comments: 90 pages, 13 figures. Accepted for publication in ApJSS

Conjugate-plane photometry: Reducing scintillation in ground-based photometry

Authors: James Osborn, Richard W. Wilson, V. S. Dhillon, Remy Avila, Gordon D. Love

Abstract: High precision fast photometry from ground-based observatories is a challenge due to intensity fluctuations (scintillation) produced by the Earth's atmosphere. Here we describe a method to reduce the effects of scintillation by a combination of pupil reconjugation and calibration using a comparison star. Because scintillation is produced by high altitude turbulence, the range of angles over which… ▽ More High precision fast photometry from ground-based observatories is a challenge due to intensity fluctuations (scintillation) produced by the Earth's atmosphere. Here we describe a method to reduce the effects of scintillation by a combination of pupil reconjugation and calibration using a comparison star. Because scintillation is produced by high altitude turbulence, the range of angles over which the scintillation is correlated is small and therefore simple correction by a comparison star is normally impossible. We propose reconjugating the telescope pupil to a high dominant layer of turbulence, then apodizing it before calibration with a comparison star. We find by simulation that given a simple atmosphere with a single high altitude turbulent layer and a strong surface layer a reduction in the intensity variance by a factor of ~30 is possible. Given a more realistic atmosphere as measured by SCIDAR at San Pedro Mártir we find that on a night with a strong high altitude layer we can expect the median variance to be reduced by a factor of 11. By reducing the scintillation noise we will be able to detect much smaller changes in brightness. If we assume a 2 m telescope and an exposure time of 30 seconds a reduction in the scintillation noise from 0.78 mmag to 0.21 mmag is possible, which will enable the routine detection of, for example, the secondary transits of extrasolar planets from the ground. △ Less

Submitted 27 September, 2010; originally announced September 2010.

Comments: 9 pages, 15 figures

Journal ref: MNRAS, 411 (2), 1223-1230, 2011

Detection of Vibrationally Excited CO in IRC+10216

Authors: Nimesh A. Patel, Ken H. Young, Sandra Brünken, Karl M. Menten, Patrick Thaddeus, Robert W. Wilson

Abstract: Using the Submillimeter Array we have detected the J=3-2 and 2-1 rotational transitions from within the first vibrationally excited state of CO toward the extreme carbon star IRC+10216 (CW Leo). The emission remains spatially unresolved with an angular resolution of ~2" and, given that the lines originate from energy levels that are ~3100 K above the ground state, almost certainly originates fro… ▽ More Using the Submillimeter Array we have detected the J=3-2 and 2-1 rotational transitions from within the first vibrationally excited state of CO toward the extreme carbon star IRC+10216 (CW Leo). The emission remains spatially unresolved with an angular resolution of ~2" and, given that the lines originate from energy levels that are ~3100 K above the ground state, almost certainly originates from a much smaller (~10^{14} cm) sized region close to the stellar photosphere. Thermal excitation of the lines requires a gas density of ~10^{9} cm^{-3}, about an order of magnitude higher than the expected gas density based previous infrared observations and models of the inner dust shell of IRC+10216. △ Less

Submitted 28 November, 2008; originally announced November 2008.

Comments: Accepted for publication in ApJ Letters

Submillimeter narrow emission lines from the inner envelope of IRC+10216

Authors: Nimesh A. Patel, Ken H. Young, Sandra Brünken, Robert W. Wilson, Patrick Thaddeus, Karl M. Menten, Mark Reid, Michael C. McCarthy, Dinh-V-Trung, Carl A. Gottlieb, Abigail Hedden

Abstract: A spectral-line survey of IRC+10216 in the 345 GHz band has been undertaken with the Submillimeter Array. Although not yet completed, it has already yielded a fairly large sample of narrow molecular emission lines with line-widths indicating expansion velocities of ~4 km/s, less than 3 times the well-known value of the terminal expansion velocity (14.5 km/s) of the outer envelope. Five of these… ▽ More A spectral-line survey of IRC+10216 in the 345 GHz band has been undertaken with the Submillimeter Array. Although not yet completed, it has already yielded a fairly large sample of narrow molecular emission lines with line-widths indicating expansion velocities of ~4 km/s, less than 3 times the well-known value of the terminal expansion velocity (14.5 km/s) of the outer envelope. Five of these narrow lines have now been identified as rotational transitions in vibrationally excited states of previously detected molecules: the v=1, J=17--16 and J=19--18 lines of Si34S and 29SiS and the v=2, J=7--6 line of CS. Maps of these lines show that the emission is confined to a region within ~60 AU of the star, indicating that the narrow-line emission is probing the region of dust-formation where the stellar wind is still being accelerated. △ Less

Submitted 13 November, 2008; originally announced November 2008.

Comments: 5 pages, 5 figures, Accepted for publication in ApJ

Journal ref: Astrophys.J.692:1205-1210,2009

Molecules in G1.6-0.025 - 'Hot' Chemistry in the Absence of Star Formation at the Periphery of the Galactic Center Region

Authors: Karl M. Menten, Robert W. Wilson, Silvia Leurini, Peter Schilke

Abstract: We present molecular line map** of the Giant Molecular Cloud G1.6-0.025, which is located at the high longitude end of the Central Molecular Zone of our Galaxy. We assess the degree of star formation activity in that region using several tracers and find very little. We made a large scale, medium (2') resolution map in the J = 2-1 transition of SiO for which we find clumpy emission over a ~0.8… ▽ More We present molecular line map** of the Giant Molecular Cloud G1.6-0.025, which is located at the high longitude end of the Central Molecular Zone of our Galaxy. We assess the degree of star formation activity in that region using several tracers and find very little. We made a large scale, medium (2') resolution map in the J = 2-1 transition of SiO for which we find clumpy emission over a ~0.8 x 0.3 degree-sized region stretching along the Galactic plane. Toward selected positions we also took spectra in the easy to excite J_k=2_k-1_k quartet of CH3OH and the CS 2-1 line. Throughout the cloud these \meth lines are, remarkably, several times stronger than, both, the CS and the SiO lines. The large widths of all the observed lines, similar to values generally found in the Galactic center, indicate a high degree of turbulence. Several high LSR velocity clumps that have 0-80 km/s higher velocities than the bulk of the molecular cloud appear at the same projected position as "normal" velocity material; this may indicate cloud-cloud collisions. Statistical equilibrium modeling of the CH3OH lines observed by us and others yield relatively high densities and moderate temperatures for a representative dual velocity position. We find 8 10^4 cm-3/30 K for material in the G1.6-0.025 cloud and a higher temperature (190 K), but a 50% lower density in a high velocity clump projected on the same location. Several scenarios are discussed in which shock chemistry might enhance the CH3OH and SiO abundances in G1.6-0.025 and elsewhere in the Central Molecular Zone. △ Less

Submitted 13 February, 2009; v1 submitted 15 October, 2008; originally announced October 2008.

Comments: 51 pages incl. 9 figures and 6 Tables, ApJ (in press)

Journal ref: Astrophys.J.692:47-60,2009

Cosmology from Antarctica

Authors: Robert W. Wilson, Antony A. Stark

Abstract: Observation of the CMB is central to observational cosmology, and the Antarctic Plateau is an exceptionally good site for this work. The first attempt at CMB observations from the Plateau was an expedition to the South Pole in December 1986 by the Radio Physics Research group at Bell Laboratories. Sky noise and opacity were measured. The results were sufficiently encouraging that in the Austral… ▽ More Observation of the CMB is central to observational cosmology, and the Antarctic Plateau is an exceptionally good site for this work. The first attempt at CMB observations from the Plateau was an expedition to the South Pole in December 1986 by the Radio Physics Research group at Bell Laboratories. Sky noise and opacity were measured. The results were sufficiently encouraging that in the Austral summer of 1988-1989, three CMB groups participated in the "Cucumber" campaign, where a temporary site dedicated to CMB anisotropy measurements was set up 2 km from South Pole Station. Winter-time observations became possible with the establishment in 1990 of the Center for Astrophysical Research in Antarctica (CARA), a National Science Foundation Science and Technology Center. CARA developed year-round observing facilities in the "Dark Sector", a section of Amundsen-Scott South Pole Station dedicated to astronomical observations. CARA scientists fielded several astronomical instruments: AST/RO, SPIREX, White Dish, Python, Viper, ACBAR, and DASI. By 2001, data from CARA, together with BOOMERANG, a CMB experiment on a long-duration balloon launched from McMurdo Station on the coast of Antarctica, showed clear evidence that the overall geometry of the Universe is flat, as opposed to being positively or negatively curved. In 2002, the DASI group reported the detection of polarization in the CMB. These observations strongly support the concordance model of cosmology, where the dynamics of a flat Universe are dominated by forces exerted by the Dark Energy and Dark Matter. The South Pole Telescope (SPT) is a newly-operational 10 m diameter offset telescope designed to rapidly measure anisotropies on scales much smaller than 1 degree. △ Less

Submitted 3 October, 2008; originally announced October 2008.

Comments: For publication in "Smithsonian at the Poles", proceedings of Smithsonian IPY conference

LOLAS: an optical turbulence profiler in the atmospheric boundary layer with extreme altitude-resolution

Authors: R. Avila, J. L. Aviles, R. W. Wilson, M. Chun, T. Butterley, E. Carrasco

Abstract: We report the development and first results of an instrument called Low Layer Scidar (LOLAS) which is aimed at the measurement of optical-turbulence profiles in the atmospheric boundary layer with high altitude-resolution. The method is based on the Generalized Scidar (GS) concept, but unlike the GS instruments which need a 1- m or larger telescope, LOLAS is implemented on a dedicated 40-cm tele… ▽ More We report the development and first results of an instrument called Low Layer Scidar (LOLAS) which is aimed at the measurement of optical-turbulence profiles in the atmospheric boundary layer with high altitude-resolution. The method is based on the Generalized Scidar (GS) concept, but unlike the GS instruments which need a 1- m or larger telescope, LOLAS is implemented on a dedicated 40-cm telescope, making it an independent instrument. The system is designed for widely separated double-star targets, which enables the high altitude-resolution. Using a 20000-separation double- star, we have obtained turbulence profiles with unprecedented 12-m resolution. The system incorporates necessary novel algorithms for autoguiding, autofocus and image stabilisation. The results presented here were obtained at Mauna Kea Observatory. They show LOLAS capabilities but cannot be considered as representative of the site. A forthcoming paper will be devoted to the site characterisation. The instrument was built as part of the Ground Layer Turbulence Monitoring Campaign on Mauna Kea for Gemini Observatory. △ Less

Submitted 30 May, 2008; originally announced May 2008.

Comments: 7 pages, 9 figures, in press in MNRAS

Elevation angle dependence of the SMA antenna focus position

Authors: Satoki Matsushita, Masao Saito, Kazushi Sakamoto, Todd R. Hunter, Nimesh A. Patel, Tirupati K. Sridharan, Robert W. Wilson

Abstract: We report the measurement results and compensation of the antenna elevation angle dependences of the Sub-millimeter Array (SMA) antenna characteristics. Without optimizing the subreflector (focus) positions as a function of the antenna elevation angle, antenna beam patterns show lopsided sidelobes, and antenna efficiencies show degradations. The sidelobe level increases and the antenna efficienc… ▽ More We report the measurement results and compensation of the antenna elevation angle dependences of the Sub-millimeter Array (SMA) antenna characteristics. Without optimizing the subreflector (focus) positions as a function of the antenna elevation angle, antenna beam patterns show lopsided sidelobes, and antenna efficiencies show degradations. The sidelobe level increases and the antenna efficiencies decrease about 1% and a few %, respectively, for every 10 degrees change in the elevation angle at the measured frequency of 237 GHz. We therefore obtained the optimized subreflector positions for X (azimuth), Y (elevation), and Z (radio optics) focus axes at various elevation angles for all the eight SMA antennas. The X axis position does not depend on the elevation angle. The Y and Z axes positions depend on the elevation angles, and are well fitted with a simple function for each axis with including a gravity term (cosine and sine of elevation, respectively). In the optimized subreflector positions, the antenna beam patterns show low level symmetric sidelobe of at most a few %, and the antenna efficiencies stay constant at any antenna elevation angles. Using one set of fitted functions for all antennas, the SMA is now operating with real-time focusing, and showing constant antenna characteristics at any given elevation angle. △ Less

Submitted 21 June, 2006; originally announced June 2006.

Comments: 10 pages, 6 figures; to appear in the Proceedings of SPIE Vol. 6275 "Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III"

Journal ref: Proc.SPIE Int.Soc.Opt.Eng. 6275:62751W,2006

A Shack-Hartmann wavefront sensor projected onto the sky with reduced focal anisoplanatism

Authors: T. Butterley, G. D. Love, R. W. Wilson, R. M. Myers, T. J. Morris

Abstract: A method for producing a laser guide star wavefront sensor for adaptive optics with reduced focal anisoplanatism is presented. A theoretical analysis and numerical simulations have been carried out and the results are presented. The technique, named SPLASH (Sky-Projected Laser Array Shack-Hartmann), is shown to suffer considerably less from focal anisoplanatism than a conventional laser guide st… ▽ More A method for producing a laser guide star wavefront sensor for adaptive optics with reduced focal anisoplanatism is presented. A theoretical analysis and numerical simulations have been carried out and the results are presented. The technique, named SPLASH (Sky-Projected Laser Array Shack-Hartmann), is shown to suffer considerably less from focal anisoplanatism than a conventional laser guide star system. The method is potentially suitable for large telescope apertures (~8m), and possibly for extremely large telescopes. △ Less

Submitted 10 February, 2006; originally announced February 2006.

Comments: 8 pages, 5 figures, accepted for publication in MNRAS

Journal ref: Mon.Not.Roy.Astron.Soc.368:837-843,2006

Acceleration of adaptive optics simulations using programmable logic

Authors: A. G. Basden, F. Assemat, T. Butterley, D. Geng, C. D. Saunter, R. W. Wilson

Abstract: Numerical Simulation is an essential part of the design and optimisation of astronomical adaptive optics systems. Simulations of adaptive optics are computationally expensive and the problem scales rapidly with telescope aperture size, as the required spatial order of the correcting system increases. Practical realistic simulations of AO systems for extremely large telescopes are beyond the capa… ▽ More Numerical Simulation is an essential part of the design and optimisation of astronomical adaptive optics systems. Simulations of adaptive optics are computationally expensive and the problem scales rapidly with telescope aperture size, as the required spatial order of the correcting system increases. Practical realistic simulations of AO systems for extremely large telescopes are beyond the capabilities of all but the largest of modern parallel supercomputers. Here we describe a more cost effective approach through the use of hardware acceleration using field programmable gate arrays. By transferring key parts of the simulation into programmable logic, large increases in computational bandwidth can be expected. We show that the calculation of wavefront sensor image centroids can be accelerated by a factor of four by transferring the algorithm into hardware. Implementing more demanding parts of the adaptive optics simulation in hardware will lead to much greater performance improvements, of up to 1000 times. △ Less

Submitted 3 October, 2005; originally announced October 2005.

Comments: 6 pages accepted by MNRAS

Journal ref: Mon.Not.Roy.Astron.Soc.364:1413-1418,2005

Receiver control for the Submillimeter Array

Authors: T. R. Hunter, R. W. Wilson, R. Kimberk, P. S. Leiker, R. D. Christensen

Abstract: Efficient operation of a submillimeter interferometer requires remote (preferably automated) control of mechanically tuned local oscillators, phase-lock loops, mixers, optics, calibration vanes and cryostats. The present control system for these aspects of the Submillimeter Array (SMA) will be described. Distributed processing forms the underlying architecture and the software is split between har… ▽ More Efficient operation of a submillimeter interferometer requires remote (preferably automated) control of mechanically tuned local oscillators, phase-lock loops, mixers, optics, calibration vanes and cryostats. The present control system for these aspects of the Submillimeter Array (SMA) will be described. Distributed processing forms the underlying architecture and the software is split between hardware platforms in a leader/follower arrangement. In each antenna cabin, a serial network of up to ten independent 80C196 microcontroller boards attaches to the real-time PowerPC computer (running LynxOS). A multi-threaded, gcc-compiled leader program on the PowerPC accepts top-level requests via remote procedure calls (RPC), subsequently dispatches tuning commands to the relevant follower microcontrollers, and regularly reports the system status to optical-fiber-based reflective memory for common access by the telescope monitor and error reporting system. All serial communication occurs asynchronously via encoded, variable-length packets. The microcontrollers respond to the requested commands and queries by accessing non-volatile, rewriteable lookup-tables (when appropriate) and executing embedded software that operates additional electronic devices (DACs, ADCs, etc.). Since various receiver hardware components require linear or rotary motion, each microcontroller also implements a position servo via a one-millisecond interrupt service routine which drives a DC-motor/encoder combination that remains standard across each subsystem. △ Less

Submitted 7 July, 2020; v1 submitted 26 September, 2005; originally announced September 2005.

Comments: 13 pages, 4 figures, 19 references, from a talk presented at the SPIE Conference on Advanced Telescope and Instrumentation Control Software II, 27-28 August 2002 in Waikoloa, HI. The text was revised on July 7, 2020 to provide a more accurate description of the distributed software by using a non-racially-based terminology of leader/follower. A few new references were also added

Journal ref: 2002SPIE.4848..206H

Facility class Rayleigh beacon AO system for the 4.2m William Herschel Telescope

Authors: R. G. M. Rutten, P. Clark, R. M. Myers, R. W. Wilson, R. G. Bingham, E. Emsellem, T. Gregory, R. A. Humphreys, J. H. Knapen, G. Moretto, S. L. Morris, G. Talbot

Abstract: A rationale is presented for the use of a relatively low-altitude Rayleigh Laser Guide Star to provide partial adaptive optics correction across a large fraction of the sky on the 4.2m William Herschel Telescope. The scientific motivation is highlighted and supported by model calculations. An overview the technical implementation of the system is presented. A rationale is presented for the use of a relatively low-altitude Rayleigh Laser Guide Star to provide partial adaptive optics correction across a large fraction of the sky on the 4.2m William Herschel Telescope. The scientific motivation is highlighted and supported by model calculations. An overview the technical implementation of the system is presented. △ Less

Submitted 7 August, 2002; originally announced August 2002.

Comments: 10 pages, 3 figures, to be published in 2002 SPIE Conference proceedings

Diffraction-limited 800nm imaging with the 2.56m Nordic Optical Telescope

Authors: J. E. Baldwin, R. N. Tubbs, G. C. Cox, C. D. Mackay, R. W. Wilson, M. I. Andersen

Abstract: A quantitative assessment is presented of diffraction-limited stellar images with Strehl ratios of 0.25-0.30 obtained by selection of short-exposure CCD images of stars brighter than +6m at 810nm with the Nordic Optical Telescope. A quantitative assessment is presented of diffraction-limited stellar images with Strehl ratios of 0.25-0.30 obtained by selection of short-exposure CCD images of stars brighter than +6m at 810nm with the Nordic Optical Telescope. △ Less

Submitted 23 January, 2001; originally announced January 2001.

Comments: Accepted by A&A 23rd Jan 2001 (submitted 7th Dec 2000)

Report number: AA Cm083

Journal ref: Astron.Astrophys.368:L1-L4,2001

The Antarctic Submillimeter Telescope and Remote Observatory (AST/RO)

Authors: Antony A. Stark, John Bally, Simon P. Balm, T. M. Bania, Alberto D. Bolatto, Richard A. Chamberlin, Gregory Engargiola, Maohai Huang, James G. Ingalls, Karl Jacobs, James M. Jackson, Jacob W. Kooi, Adair P. Lane, K. -Y. Lo, Rodney D. Marks, Christopher L. Martin, Dennis Mumma, Roopesh Ojha, Rudolf Schieder, Johannes Staguhn, Juergen Stutzki, Christopher K. Walker, Robert W. Wilson, Gregory A. Wright, Xiaolei Zhang , et al. (2 additional authors not shown)

Abstract: AST/RO, a 1.7 m diameter telescope for astronomy and aeronomy studies at wavelengths between 200 and 2000 microns, was installed at the South Pole during the 1994-1995 Austral summer. The telescope operates continuously through the Austral winter, and is being used primarily for spectroscopic studies of neutral atomic carbon and carbon monoxide in the interstellar medium of the Milky Way and the… ▽ More AST/RO, a 1.7 m diameter telescope for astronomy and aeronomy studies at wavelengths between 200 and 2000 microns, was installed at the South Pole during the 1994-1995 Austral summer. The telescope operates continuously through the Austral winter, and is being used primarily for spectroscopic studies of neutral atomic carbon and carbon monoxide in the interstellar medium of the Milky Way and the Magellanic Clouds. The South Pole environment is unique among observatory sites for unusually low wind speeds, low absolute humidity, and the consistent clarity of the submillimeter sky. Four heterodyne receivers, an array receiver, three acousto-optical spectrometers, and an array spectrometer are installed. A Fabry-Perot spectrometer using a bolometric array and a Terahertz receiver are in development. Telescope pointing, focus, and calibration methods as well as the unique working environment and logistical requirements of the South Pole are described. △ Less

Submitted 15 December, 2000; v1 submitted 16 August, 2000; originally announced August 2000.

Comments: 57 pages, 15 figures. Submitted to PASP