-
Self-driven oscillation in Coulomb blockaded suspended carbon nanotubes
Authors:
Kyle Willick,
Jonathan Baugh
Abstract:
Suspended carbon nanotubes are known to support self-driven oscillations due to electromechanical feedback under certain conditions, including low temperatures and high mechanical quality factors. Prior reports identified signatures of such oscillations in Kondo or high-bias transport regimes. Here, we observe self-driven oscillations that give rise to significant conduction in normally Coulomb-bl…
▽ More
Suspended carbon nanotubes are known to support self-driven oscillations due to electromechanical feedback under certain conditions, including low temperatures and high mechanical quality factors. Prior reports identified signatures of such oscillations in Kondo or high-bias transport regimes. Here, we observe self-driven oscillations that give rise to significant conduction in normally Coulomb-blockaded low-bias transport. Using a master equation model, the self-driving is shown to result from strongly energy-dependent electron tunneling, and the dependencies of transport features on bias, gate voltage, and temperature are well reproduced.
△ Less
Submitted 26 May, 2020; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Understanding resonant charge transport through weakly coupled single-molecule junctions
Authors:
James O. Thomas,
Bart Limburg,
Jakub K. Sowa,
Kyle Willick,
Jonathan Baugh,
G. Andrew D. Briggs,
Erik M. Gauger,
Harry L. Anderson,
Jan A. Mol
Abstract:
Off-resonant charge transport through molecular junctions has been extensively studied since the advent of single-molecule electronics and it is now well understood within the framework of the non-interacting Landauer approach. Conversely, gaining a qualitative and quantitative understanding of the resonant transport regime has proven more elusive. Here, we study resonant charge transport through…
▽ More
Off-resonant charge transport through molecular junctions has been extensively studied since the advent of single-molecule electronics and it is now well understood within the framework of the non-interacting Landauer approach. Conversely, gaining a qualitative and quantitative understanding of the resonant transport regime has proven more elusive. Here, we study resonant charge transport through graphene-based zinc-porphyrin junctions. We experimentally demonstrate an inadequacy of the non-interacting Landauer theory as well as the conventional single-mode Franck-Condon model. Instead, we model the overall charge transport as a sequence of non-adiabatic electron transfers, the rates of which depend on both outer and inner-sphere vibrational interactions. We show that the transport properties of our molecular junctions are determined by a combination of electron-electron and electron-vibrational coupling, and are sensitive to the interactions with the wider local environment. Furthermore, we assess the importance of nuclear tunnelling and examine the suitability of semi-classical Marcus theory as a description of charge transport in molecular devices.
△ Less
Submitted 1 October, 2019; v1 submitted 18 December, 2018;
originally announced December 2018.
-
Network architecture for a topological quantum computer in silicon
Authors:
Brandon Buonacorsi,
Zhenyu Cai,
Eduardo B. Ramirez,
Kyle S. Willick,
Sean M. Walker,
Jiahao Li,
Benjamin D. Shaw,
Xiaosi Xu,
Simon C. Benjamin,
Jonathan Baugh
Abstract:
A design for a large-scale surface code quantum processor based on a node/network approach is introduced for semiconductor quantum dot spin qubits. The minimal node contains only 7 quantum dots, and nodes are separated on the micron scale, creating useful space for wiring interconnects and integration of conventional transistor circuits. Entanglement is distributed between neighbouring nodes by lo…
▽ More
A design for a large-scale surface code quantum processor based on a node/network approach is introduced for semiconductor quantum dot spin qubits. The minimal node contains only 7 quantum dots, and nodes are separated on the micron scale, creating useful space for wiring interconnects and integration of conventional transistor circuits. Entanglement is distributed between neighbouring nodes by loading spin singlets locally and then shuttling one member of the pair through a linear array of empty dots. Each node contains one data qubit, two ancilla qubits, and additional dots to facilitate electron shuttling and measurement of the ancillas. A four-node GHZ state is realized by sharing three internode singlets followed by local gate operations and ancilla measurements. Further local operations and measurements produce an X or Z stabilizer on four data qubits, which is the fundamental operation of the surface code. Electron shuttling is simulated using a simplified gate electrode geometry without explicit barrier gates, and demonstrates that adiabatic transport is possible on timescales that do not present a speed bottleneck to the processor. An important shuttling error in a clean system is uncontrolled phase rotation due to the modulation of the electronic g-factor during transport, owing to the Stark effect. This error can be reduced by appropriate electrostatic tuning of the stationary electron's g-factor. Using reasonable noise models, we estimate error thresholds with respect to single and two-qubit gate fidelities as well as singlet dephasing errors during shuttling. A twirling protocol transforms the non-Pauli noise associated with exchange gate operations into Pauli noise, making it possible to use the Gottesman-Knill theorem to efficiently simulate large codes.
△ Less
Submitted 26 November, 2018; v1 submitted 25 July, 2018;
originally announced July 2018.
-
Efficient continuous wave noise spectroscopy beyond weak coupling
Authors:
Kyle Willick,
Daniel K. Park,
Jonathan Baugh
Abstract:
The optimization of quantum control for physical qubits relies on accurate noise characterization. Probing the spectral density $S(ω)$ of semi-classical phase noise using a spin interacting with a continuous-wave (CW) resonant excitation field has recently gained attention. CW noise spectroscopy protocols have been based on the generalized Bloch equations (GBE) or the filter function formalism, as…
▽ More
The optimization of quantum control for physical qubits relies on accurate noise characterization. Probing the spectral density $S(ω)$ of semi-classical phase noise using a spin interacting with a continuous-wave (CW) resonant excitation field has recently gained attention. CW noise spectroscopy protocols have been based on the generalized Bloch equations (GBE) or the filter function formalism, assuming weak coupling to a Markovian bath. However, this standard protocol can substantially underestimate $S(ω)$ at low frequencies when the CW pulse amplitude becomes comparable to $S(ω)$. Here, we derive the coherence decay function more generally by extending it to higher orders in the noise strength and discarding the Markov approximation. Numerical simulations show that this provides a more accurate description of the spin dynamics compared to a simple exponential decay, especially on short timescales. Exploiting these results, we devise a protocol that uses an experiment at a single CW pulse amplitude to extend the spectral range over which $S(ω)$ can be reliably determined to $ω=0$.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
Fast measurement of carbon nanotube resonator amplitude with a heterojunction bipolar transistor
Authors:
Kyle Willick,
Xiaowu Tang,
Jonathan Baugh
Abstract:
Carbon nanotube (CNT) electromechanical resonators have demonstrated unprecedented sensitivities for detecting small masses and forces. The detection speed in a cryogenic setup is usually limited by the CNT contact resistance and parasitic capacitance. We report the use of a heterojunction bipolar transistor (HBT) amplifying circuit near the device to measure the mechanical amplitude at microsecon…
▽ More
Carbon nanotube (CNT) electromechanical resonators have demonstrated unprecedented sensitivities for detecting small masses and forces. The detection speed in a cryogenic setup is usually limited by the CNT contact resistance and parasitic capacitance. We report the use of a heterojunction bipolar transistor (HBT) amplifying circuit near the device to measure the mechanical amplitude at microsecond timescales. A Coulomb rectification scheme, in which the probe signal is at much lower frequency than the mechanical drive signal, allows investigation of the strongly non-linear regime. The behaviour of transients in both the linear and non-linear regimes is observed and modeled by including Duffing and non-linear dam** terms in a harmonic oscillator equation. We show that the non-linear regime can result in faster mechanical response times, on the order of 10 microseconds for the device and circuit presented, potentially enabling the magnetic moments of single molecules to be measured within their spin relaxation and dephasing timescales.
△ Less
Submitted 10 July, 2017;
originally announced July 2017.
-
Sensitive Magnetic Force Detection with a Carbon Nanotube Resonator
Authors:
Kyle Willick,
Chris Haapamaki,
Jonathan Baugh
Abstract:
We propose a technique for sensitive magnetic point force detection using a suspended carbon nanotube (CNT) mechanical resonator combined with a magnetic field gradient generated by a ferromagnetic gate electrode. Numerical calculations of the mechanical resonance frequency show that single Bohr magneton changes in the magnetic state of an individual magnetic molecule grafted to the CNT can transl…
▽ More
We propose a technique for sensitive magnetic point force detection using a suspended carbon nanotube (CNT) mechanical resonator combined with a magnetic field gradient generated by a ferromagnetic gate electrode. Numerical calculations of the mechanical resonance frequency show that single Bohr magneton changes in the magnetic state of an individual magnetic molecule grafted to the CNT can translate to detectable frequency shifts, on the order of a few kHz. The dependences of the resonator response to device parameters such as length, tension, CNT diameter, and gate voltage are explored and optimal operating conditions are identified. A signal-to-noise analysis shows that in principle, magnetic switching at the level of a single Bohr magneton can be read out in a single shot on timescales as short as 10 microseconds. This force sensor should enable new studies of spin dynamics in isolated single molecule magnets, free from the crystalline or ensemble settings typically studied.
△ Less
Submitted 26 February, 2014;
originally announced February 2014.
-
Magnetoconductance signatures of subband structure in semiconductor nanowires
Authors:
Gregory W. Holloway,
Daryoush Shiri,
Chris M. Haapamaki,
Kyle Willick,
Grant Watson,
Ray R. LaPierre,
Jonathan Baugh
Abstract:
The radial confining potential in a semiconductor nanowire plays a key role in determining its quantum transport properties. Previous reports have shown that an axial magnetic field induces flux-periodic conductance oscillations when the electronic states are confined to a shell. This effect is due to the coupling of orbital angular momentum to the magnetic flux. Here, we perform calculations of t…
▽ More
The radial confining potential in a semiconductor nanowire plays a key role in determining its quantum transport properties. Previous reports have shown that an axial magnetic field induces flux-periodic conductance oscillations when the electronic states are confined to a shell. This effect is due to the coupling of orbital angular momentum to the magnetic flux. Here, we perform calculations of the energy level structure, and consequently the conductance, for more general cases ranging from a flat potential to strong surface band bending. The transverse states are not confined to a shell, but are distributed across the nanowire. It is found that, in general, the subband energy spectrum is aperiodic as a function of both gate voltage and magnetic field. In principle, this allows for precise identification of the occupied subbands from the magnetoconductance patterns of quasi-ballistic devices. The aperiodicity becomes more apparent as the potential flattens. A quantitative method is introduced for matching features in the conductance data to the subband structure resulting from a particular radial potential, where a functional form for the potential is used that depends on two free parameters. Finally, a short-channel InAs nanowire FET device is measured at low temperature in search of conductance features that reveal the subband structure. Features are identified and shown to be consistent with three specific subbands. The experiment is analyzed in the context of the weak localization regime, however, we find that the subband effects predicted for ballistic transport should remain visible when back scattering dominates over interband scattering, as is expected for this device.
△ Less
Submitted 17 November, 2014; v1 submitted 23 May, 2013;
originally announced May 2013.
