-
Euclid: Early Release Observations -- The intracluster light and intracluster globular clusters of the Perseus cluster
Authors:
M. Kluge,
N. A. Hatch,
M. Montes,
J. B. Golden-Marx,
A. H. Gonzalez,
J. -C. Cuillandre,
M. Bolzonella,
A. Lançon,
R. Laureijs,
T. Saifollahi,
M. Schirmer,
C. Stone,
A. Boselli,
M. Cantiello,
J. G. Sorce,
F. R. Marleau,
P. -A. Duc,
E. Sola,
M. Urbano,
S. L. Ahad,
Y. M. Bahé,
S. P. Bamford,
C. Bellhouse,
F. Buitrago,
P. Dimauro
, et al. (163 additional authors not shown)
Abstract:
We study the intracluster light (ICL) and intracluster globular clusters (ICGCs) in the nearby Perseus galaxy cluster using Euclid's EROs. By modelling the isophotal and iso-density contours, we map the distributions and properties of the ICL and ICGCs out to a radius of 600 kpc (~1/3 of the virial radius) from the brightest cluster galaxy (BCG). We find that the central 500 kpc of the Perseus clu…
▽ More
We study the intracluster light (ICL) and intracluster globular clusters (ICGCs) in the nearby Perseus galaxy cluster using Euclid's EROs. By modelling the isophotal and iso-density contours, we map the distributions and properties of the ICL and ICGCs out to a radius of 600 kpc (~1/3 of the virial radius) from the brightest cluster galaxy (BCG). We find that the central 500 kpc of the Perseus cluster hosts 70000$\pm$2800 GCs and $1.6\times10^{12}$ L$_\odot$ of diffuse light from the BCG+ICL in the near-infrared H$_E$. This accounts for 37$\pm$6% of the cluster's total stellar luminosity within this radius. The ICL and ICGCs share a coherent spatial distribution, suggesting a common origin or that a common potential governs their distribution. Their contours on the largest scales (>200 kpc) are offset from the BCG's core westwards by 60 kpc towards several luminous cluster galaxies. This offset is opposite to the displacement observed in the gaseous intracluster medium. The radial surface brightness profile of the BCG+ICL is best described by a double Sérsic model, with 68$\pm$4% of the H$_E$ light in the extended, outer component. The transition between these components occurs at ~50 kpc, beyond which the isophotes become increasingly elliptical and off-centred. The radial ICGC number density profile closely follows the BCG+ICL profile only beyond this 50 kpc radius, where we find an average of 60 GCs per $10^9$ M$_\odot$ of diffuse stellar mass. The BCG+ICL colour becomes increasingly blue with radius, consistent with the stellar populations in the ICL having subsolar metallicities [Fe/H]~-0.6. The colour of the ICL, and the specific frequency and luminosity function of the ICGCs suggest that the ICL+ICGCs were tidally stripped from the outskirts of massive satellites with masses of a few $\times10^{10}$ M$_\odot$, with an increasing contribution from dwarf galaxies at large radii.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid: Early Release Observations -- Dwarf galaxies in the Perseus galaxy cluster
Authors:
F. R. Marleau,
J. -C. Cuillandre,
M. Cantiello,
D. Carollo,
P. -A. Duc,
R. Habas,
L. K. Hunt,
P. Jablonka,
M. Mirabile,
M. Mondelin,
M. Poulain,
T. Saifollahi,
R. Sánchez-Janssen,
E. Sola,
M. Urbano,
R. Zöller,
M. Bolzonella,
A. Lançon,
R. Laureijs,
O. Marchal,
M. Schirmer,
C. Stone,
A. Boselli,
A. Ferré-Mateu,
N. A. Hatch
, et al. (171 additional authors not shown)
Abstract:
We make use of the unprecedented depth, spatial resolution, and field of view of the Euclid Early Release Observations of the Perseus galaxy cluster to detect and characterise the dwarf galaxy population in this massive system. The Euclid high resolution VIS and combined VIS+NIR colour images were visually inspected and dwarf galaxy candidates were identified. Their morphologies, the presence of n…
▽ More
We make use of the unprecedented depth, spatial resolution, and field of view of the Euclid Early Release Observations of the Perseus galaxy cluster to detect and characterise the dwarf galaxy population in this massive system. The Euclid high resolution VIS and combined VIS+NIR colour images were visually inspected and dwarf galaxy candidates were identified. Their morphologies, the presence of nuclei, and their globular cluster (GC) richness were visually assessed, complementing an automatic detection of the GC candidates. Structural and photometric parameters, including Euclid filter colours, were extracted from 2-dimensional fitting. Based on this analysis, a total of 1100 dwarf candidates were found across the image, with 638 appearing to be new identifications. The majority (96%) are classified as dwarf ellipticals, 53% are nucleated, 26% are GC-rich, and 6% show disturbed morphologies. A relatively high fraction of galaxies, 8%, are categorised as ultra-diffuse galaxies. The majority of the dwarfs follow the expected scaling relations. Globally, the GC specific frequency, S_N, of the Perseus dwarfs is intermediate between those measured in the Virgo and Coma clusters. While the dwarfs with the largest GC counts are found throughout the Euclid field of view, those located around the east-west strip, where most of the brightest cluster members are found, exhibit larger S_N values, on average. The spatial distribution of the dwarfs, GCs, and intracluster light show a main iso-density/isophotal centre displaced to the west of the bright galaxy light distribution. The ERO imaging of the Perseus cluster demonstrates the unique capability of Euclid to concurrently detect and characterise large samples of dwarfs, their nuclei, and their GC systems, allowing us to construct a detailed picture of the formation and evolution of galaxies over a wide range of mass scales and environments.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid: Early Release Observations -- Globular clusters in the Fornax galaxy cluster, from dwarf galaxies to the intracluster field
Authors:
T. Saifollahi,
K. Voggel,
A. Lançon,
Michele Cantiello,
M. A. Raj,
J. -C. Cuillandre,
S. S. Larsen,
F. R. Marleau,
A. Venhola,
M. Schirmer,
D. Carollo,
P. -A. Duc,
A. M. N. Ferguson,
L. K. Hunt,
M. Kümmel,
R. Laureijs,
O. Marchal,
A. A. Nucita,
R. F. Peletier,
M. Poulain,
M. Rejkuba,
R. Sánchez-Janssen,
M. Urbano,
Abdurro'uf,
B. Altieri
, et al. (174 additional authors not shown)
Abstract:
We present an analysis of Euclid observations of a 0.5 deg$^2$ field in the central region of the Fornax galaxy cluster that were acquired during the performance verification phase. With these data, we investigate the potential of Euclid for identifying GCs at 20 Mpc, and validate the search methods using artificial GCs and known GCs within the field from the literature. Our analysis of artificial…
▽ More
We present an analysis of Euclid observations of a 0.5 deg$^2$ field in the central region of the Fornax galaxy cluster that were acquired during the performance verification phase. With these data, we investigate the potential of Euclid for identifying GCs at 20 Mpc, and validate the search methods using artificial GCs and known GCs within the field from the literature. Our analysis of artificial GCs injected into the data shows that Euclid's data in $I_{\rm E}$ band is 80% complete at about $I_{\rm E} \sim 26.0$ mag ($M_{V\rm } \sim -5.0$ mag), and resolves GCs as small as $r_{\rm h} = 2.5$ pc. In the $I_{\rm E}$ band, we detect more than 95% of the known GCs from previous spectroscopic surveys and GC candidates of the ACS Fornax Cluster Survey, of which more than 80% are resolved. We identify more than 5000 new GC candidates within the field of view down to $I_{\rm E}$ mag, about 1.5 mag fainter than the typical GC luminosity function turn-over magnitude, and investigate their spatial distribution within the intracluster field. We then focus on the GC candidates around dwarf galaxies and investigate their numbers, stacked luminosity distribution and stacked radial distribution. While the overall GC properties are consistent with those in the literature, an interesting over-representation of relatively bright candidates is found within a small number of relatively GC-rich dwarf galaxies. Our work confirms the capabilities of Euclid data in detecting GCs and separating them from foreground and background contaminants at a distance of 20 Mpc, particularly for low-GC count systems such as dwarf galaxies.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid: Early Release Observations -- Deep anatomy of nearby galaxies
Authors:
L. K. Hunt,
F. Annibali,
J. -C. Cuillandre,
A. M. N. Ferguson,
P. Jablonka,
S. S. Larsen,
F. R. Marleau,
E. Schinnerer,
M. Schirmer,
C. Stone,
C. Tortora,
T. Saifollahi,
A. Lançon,
M. Bolzonella,
S. Gwyn,
M. Kluge,
R. Laureijs,
D. Carollo,
M. L. M. Collins,
P. Dimauro,
P. -A. Duc,
D. Erkal,
J. M. Howell,
C. Nally,
E. Saremi
, et al. (174 additional authors not shown)
Abstract:
Euclid is poised to make significant advances in the study of nearby galaxies in the local Universe. Here we present a first look at 6 galaxies observed for the Nearby Galaxy Showcase as part of the Euclid Early Release Observations acquired between August and November, 2023. These targets, 3 dwarf galaxies (HolmbergII, IC10, NGC6822) and 3 spirals (IC342, NGC2403, NGC6744), range in distance from…
▽ More
Euclid is poised to make significant advances in the study of nearby galaxies in the local Universe. Here we present a first look at 6 galaxies observed for the Nearby Galaxy Showcase as part of the Euclid Early Release Observations acquired between August and November, 2023. These targets, 3 dwarf galaxies (HolmbergII, IC10, NGC6822) and 3 spirals (IC342, NGC2403, NGC6744), range in distance from about 0.5 Mpc to 8.8 Mpc. Our assessment of the surface brightness depths in the stacked Euclid images confirms previous estimates in 100 arcsec^2 regions of 1sigma=30.5 mag/arcsec^2 for VIS, but slightly deeper than previous estimates for NISP with 1sigma=29.2-29.4 mag/arcsec^2. By combining Euclid HE, YE, and IE into RGB images, we illustrate the large field-of-view covered by a single Reference Observing Sequence, together with exquisite detail on parsec scales in these nearby galaxies. Radial surface brightness and color profiles demonstrate galaxy colors in agreement with stellar population synthesis models. Standard stellar photometry selection techniques find approximately 1.3 million stars across the 6 galaxy fields. Euclid's resolved stellar photometry allows us to constrain the star-formation histories of these galaxies, by disentangling the distributions of young stars, as well as asymptotic giant branch and red giant branch stellar populations. We finally examine 2 galaxies individually for surrounding satellite systems. Our analysis of the ensemble of dwarf satellites around NGC6744 reveals a new galaxy, EDwC1, a nucleated dwarf spheroidal at the end of a spiral arm. Our new census of the globular clusters around NGC2403 yields 9 new star-cluster candidates, 8 of which with colors indicative of evolved stellar populations. In summary, our investigation of the 6 Showcase galaxies demonstrates that Euclid is a powerful probe of the anatomy of nearby galaxies [abridged].
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid: Early Release Observations -- A glance at free-floating new-born planets in the sigma Orionis cluster
Authors:
E. L. Martín,
M. {Ž}erjal,
H. Bouy,
D. Martin-Gonzalez,
S. Mu{ň}oz Torres,
D. Barrado,
J. Olivares,
A. Pérez-Garrido,
P. Mas-Buitrago,
P. Cruz,
E. Solano,
M. R. Zapatero Osorio,
N. Lodieu,
V. J. S. Béjar,
J. -Y. Zhang,
C. del Burgo,
N. Huélamo,
R. Laureijs,
A. Mora,
T. Saifollahi,
J. -C. Cuillandre,
M. Schirmer,
R. Tata,
S. Points,
N. Phan-Bao
, et al. (153 additional authors not shown)
Abstract:
We provide an early assessment of the imaging capabilities of the Euclid space mission to probe deeply into nearby star-forming regions and associated very young open clusters, and in particular to check to what extent it can shed light on the new-born free-floating planet population. This paper focuses on a low-reddening region observed in just one Euclid pointing where the dust and gas has been…
▽ More
We provide an early assessment of the imaging capabilities of the Euclid space mission to probe deeply into nearby star-forming regions and associated very young open clusters, and in particular to check to what extent it can shed light on the new-born free-floating planet population. This paper focuses on a low-reddening region observed in just one Euclid pointing where the dust and gas has been cleared out by the hot sigma Orionis star. One late-M and six known spectroscopically confirmed L-type substellar members in the sigma Orionis cluster are used as benchmarks to provide a high-purity procedure to select new candidate members with Euclid. The exquisite angular resolution and depth delivered by the Euclid instruments allow us to focus on bona-fide point sources. A cleaned sample of sigma Orionis cluster substellar members has been produced and the initial mass function (IMF) has been estimated by combining Euclid and Gaia data. Our sigma Orionis substellar IMF is consistent with a power-law distribution with no significant steepening at the planetary-mass end. No evidence of a low-mass cutoff is found down to about 4 Jupiter masses at the young age (3 Myr) of the sigma Orionis open cluster.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid: Early Release Observations -- Programme overview and pipeline for compact- and diffuse-emission photometry
Authors:
J. -C. Cuillandre,
E. Bertin,
M. Bolzonella,
H. Bouy,
S. Gwyn,
S. Isani,
M. Kluge,
O. Lai,
A. Lançon,
D. A. Lang,
R. Laureijs,
T. Saifollahi,
M. Schirmer,
C. Stone,
Abdurro'uf,
N. Aghanim,
B. Altieri,
F. Annibali,
H. Atek,
P. Awad,
M. Baes,
E. Bañados,
D. Barrado,
S. Belladitta,
V. Belokurov
, et al. (240 additional authors not shown)
Abstract:
The Euclid ERO showcase Euclid's capabilities in advance of its main mission, targeting 17 astronomical objects, from galaxy clusters, nearby galaxies, globular clusters, to star-forming regions. A total of 24 hours observing time was allocated in the early months of operation, engaging the scientific community through an early public data release. We describe the development of the ERO pipeline t…
▽ More
The Euclid ERO showcase Euclid's capabilities in advance of its main mission, targeting 17 astronomical objects, from galaxy clusters, nearby galaxies, globular clusters, to star-forming regions. A total of 24 hours observing time was allocated in the early months of operation, engaging the scientific community through an early public data release. We describe the development of the ERO pipeline to create visually compelling images while simultaneously meeting the scientific demands within months of launch, leveraging a pragmatic, data-driven development strategy. The pipeline's key requirements are to preserve the image quality and to provide flux calibration and photometry for compact and extended sources. The pipeline's five pillars are: removal of instrumental signatures; astrometric calibration; photometric calibration; image stacking; and the production of science-ready catalogues for both the VIS and NISP instruments. We report a PSF with a full width at half maximum of 0.16" in the optical and 0.49" in the three NIR bands. Our VIS mean absolute flux calibration is accurate to about 1%, and 10% for NISP due to a limited calibration set; both instruments have considerable colour terms. The median depth is 25.3 and 23.2 AB mag with a SNR of 10 for galaxies, and 27.1 and 24.5 AB mag at an SNR of 5 for point sources for VIS and NISP, respectively. Euclid's ability to observe diffuse emission is exceptional due to its extended PSF nearly matching a pure diffraction halo, the best ever achieved by a wide-field, high-resolution imaging telescope. Euclid offers unparalleled capabilities for exploring the LSB Universe across all scales, also opening a new observational window in the NIR. Median surface-brightness levels of 29.9 and 28.3 AB mag per square arcsec are achieved for VIS and NISP, respectively, for detecting a 10 arcsec x 10 arcsec extended feature at the 1 sigma level.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid. I. Overview of the Euclid mission
Authors:
Euclid Collaboration,
Y. Mellier,
Abdurro'uf,
J. A. Acevedo Barroso,
A. Achúcarro,
J. Adamek,
R. Adam,
G. E. Addison,
N. Aghanim,
M. Aguena,
V. Ajani,
Y. Akrami,
A. Al-Bahlawan,
A. Alavi,
I. S. Albuquerque,
G. Alestas,
G. Alguero,
A. Allaoui,
S. W. Allen,
V. Allevato,
A. V. Alonso-Tetilla,
B. Altieri,
A. Alvarez-Candal,
A. Amara,
L. Amendola
, et al. (1086 additional authors not shown)
Abstract:
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14…
▽ More
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Influence of the downstream blade sweep on cross-flow turbine performance
Authors:
Abigale Snortland,
Aidan Hunt,
Owen Williams,
Brian Polagye
Abstract:
Cross-flow turbine blades encounter a relatively undisturbed inflow for the first half of each rotational cycle ("upstream sweep") and then pass through their own wake for the latter half ("downstream sweep"). While most research on cross-flow turbine optimization focuses on the power-generating upstream sweep, we use singled-bladed turbine experiments to show that the downstream sweep strongly af…
▽ More
Cross-flow turbine blades encounter a relatively undisturbed inflow for the first half of each rotational cycle ("upstream sweep") and then pass through their own wake for the latter half ("downstream sweep"). While most research on cross-flow turbine optimization focuses on the power-generating upstream sweep, we use singled-bladed turbine experiments to show that the downstream sweep strongly affects time-averaged performance. We find that power generation from the upstream sweep continues to increase beyond the optimal tip-speed ratio. In contrast, the power consumption from the downstream sweep begins to increase approximately linearly beyond the optimal tip-speed ratio due in part to an increasingly unfavorable orientation of lift and drag relative to the rotation direction as well as high tangential blade velocities. Downstream power degradation increases faster than upstream power generation, indicating the downstream sweep strongly influences the optimal tip-speed ratio. In addition, particle image velocimetry data is obtained inside the turbine swept area at three tip-speed ratios. This illuminates the mechanisms underpinning the observed performance degradation in the downstream sweep and motivates an analytical model for a limited case with high induction. Performance results are shown to be consistent across 55 unique combinations of chord-to-radius ratio, preset pitch angle, and Reynolds number, underscoring the general relevance of the downstream sweep.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Object classification with Convolutional Neural Networks: from KiDS to Euclid
Authors:
G. A. Verdoes Kleijn,
C. A. Marocico,
Y. Mzayek,
M. Pöntinen,
M. Granvik,
O. Williams,
J. T. A. de Jong,
T. Saifollahi,
L. Wang,
B. Margalef-Bentabol,
A. La Marca,
B. Chowdhary Nagam,
L. V. E. Koopmans,
E. A. Valentijn
Abstract:
Large-scale imaging surveys have grown about 1000 times faster than the number of astronomers in the last 3 decades. Using Artificial Intelligence instead of astronomer's brains for interpretative tasks allows astronomers to keep up with the data. We give a progress report on using Convolutional Neural Networks (CNNs) to classify three classes of rare objects (galaxy mergers, strong gravitational…
▽ More
Large-scale imaging surveys have grown about 1000 times faster than the number of astronomers in the last 3 decades. Using Artificial Intelligence instead of astronomer's brains for interpretative tasks allows astronomers to keep up with the data. We give a progress report on using Convolutional Neural Networks (CNNs) to classify three classes of rare objects (galaxy mergers, strong gravitational lenses and asteroids) in the Kilo-Degree Survey (KiDS) and the Euclid Survey.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Euclid: Identifying the reddest high-redshift galaxies in the Euclid Deep Fields with gradient-boosted trees
Authors:
T. Signor,
G. Rodighiero,
L. Bisigello,
M. Bolzonella,
K. I. Caputi,
E. Daddi,
G. De Lucia,
A. Enia,
L. Gabarra,
C. Gruppioni,
A. Humphrey,
F. La Franca,
C. Mancini,
L. Pozzetti,
S. Serjeant,
L. Spinoglio,
S. E. van Mierlo,
S. Andreon,
N. Auricchio,
M. Baldi,
S. Bardelli,
P. Battaglia,
R. Bender,
C. Bodendorf,
D. Bonino
, et al. (116 additional authors not shown)
Abstract:
Dusty, distant, massive ($M_*\gtrsim 10^{11}\,\rm M_\odot$) galaxies are usually found to show a remarkable star-formation activity, contributing on the order of $25\%$ of the cosmic star-formation rate density at $z\approx3$--$5$, and up to $30\%$ at $z\sim7$ from ALMA observations. Nonetheless, they are elusive in classical optical surveys, and current near-infrared surveys are able to detect th…
▽ More
Dusty, distant, massive ($M_*\gtrsim 10^{11}\,\rm M_\odot$) galaxies are usually found to show a remarkable star-formation activity, contributing on the order of $25\%$ of the cosmic star-formation rate density at $z\approx3$--$5$, and up to $30\%$ at $z\sim7$ from ALMA observations. Nonetheless, they are elusive in classical optical surveys, and current near-infrared surveys are able to detect them only in very small sky areas. Since these objects have low space densities, deep and wide surveys are necessary to obtain statistically relevant results about them. Euclid will be potentially capable of delivering the required information, but, given the lack of spectroscopic features at these distances within its bands, it is still unclear if it will be possible to identify and characterize these objects. The goal of this work is to assess the capability of Euclid, together with ancillary optical and near-infrared data, to identify these distant, dusty and massive galaxies, based on broadband photometry. We used a gradient-boosting algorithm to predict both the redshift and spectral type of objects at high $z$. To perform such an analysis we make use of simulated photometric observations derived using the SPRITZ software. The gradient-boosting algorithm was found to be accurate in predicting both the redshift and spectral type of objects within the Euclid Deep Survey simulated catalog at $z>2$. In particular, we study the analog of HIEROs (i.e. sources with $H-[4.5]>2.25$), combining Euclid and Spitzer data at the depth of the Deep Fields. We found that the dusty population at $3\lesssim z\lesssim 7$ is well identified, with a redshift RMS and OLF of only $0.55$ and $8.5\%$ ($H_E\leq26$), respectively. Our findings suggest that with Euclid we will obtain meaningful insights into the role of massive and dusty galaxies in the cosmic star-formation rate over time.
△ Less
Submitted 5 April, 2024; v1 submitted 7 February, 2024;
originally announced February 2024.
-
Zeta potential and nanodiamond self assembly assisted diamond growth on lithium niobate and lithium tantalate single crystal
Authors:
Soumen Mandal,
Karsten Arts,
David Morgan,
Zhuohui Chen,
Oliver A. Williams
Abstract:
This study focuses on the self-assembly and subsequent diamond growth on SiO$_2$ buffered lithium niobate (LiNbO$_3$) and lithium tantalate (LiTaO$_3$) single crystals. The zeta-potential of LNO and LTO single crystal were measured as a function of pH. They were found to be negative in the pH range 3.5-9.5. The isoelectric point for LNO was found to be at pH $\sim$ 2.91 and that of LTO to be at pH…
▽ More
This study focuses on the self-assembly and subsequent diamond growth on SiO$_2$ buffered lithium niobate (LiNbO$_3$) and lithium tantalate (LiTaO$_3$) single crystals. The zeta-potential of LNO and LTO single crystal were measured as a function of pH. They were found to be negative in the pH range 3.5-9.5. The isoelectric point for LNO was found to be at pH $\sim$ 2.91 and that of LTO to be at pH $\sim$ 3.20. X-ray photoelectron spectroscopy performed on the surfaces show presence of oxygen groups which may be responsible for the negative zeta potential of the crystals. Self-assembly of nanodiamond particles on LTO and LNO, using nanodiamond colloid, were studied. As expected, high nanodiamond density was seen when self-assembly was done using a positively charged nanodiamond particles. Diamond growth was attempted on the nanodiamond coated substrates but they were found to be unsuitable for direct growth due to disintegration of substrates in diamond growth conditions.. A $\sim$100nm thick silicon dioxide layer was deposited on the crystals, followed by nanodiamond self assembly and diamond growth. Thin diamond films were successfully grown on both coated crystals. The diamond quality was analysed by Raman spectroscopy and atomic force microscopy.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Equation-Free Computations as DDDAS Protocols for Bifurcation Studies: A Granular Chain Example
Authors:
M. O. Williams,
Y. M. Psarellis,
D. Pozharskiy,
C. Chong,
F. Li,
J. Yang,
P. G. Kevrekidis,
I. G. Kevrekidis
Abstract:
This chapter discusses the development and implementation of algorithms based on Equation-Free/Dynamic Data Driven Applications Systems (EF/DDDAS) protocols for the computer-assisted study of the bifurcation structure of complex dynamical systems, such as those that arise in biology (neuronal networks, cell populations), multiscale systems in physics, chemistry and engineering, and system modeling…
▽ More
This chapter discusses the development and implementation of algorithms based on Equation-Free/Dynamic Data Driven Applications Systems (EF/DDDAS) protocols for the computer-assisted study of the bifurcation structure of complex dynamical systems, such as those that arise in biology (neuronal networks, cell populations), multiscale systems in physics, chemistry and engineering, and system modeling in the social sciences. An illustrative example demonstrates the experimental realization of a chain of granular particles (a so-called engineered granular chain). In particular, the focus is on the detection/stability analysis of time-periodic, spatially localized structures referred to as "dark breathers". Results in this chapter highlight, both experimentally and numerically, that the number of breathers can be controlled by varying the frequency as well as the amplitude of an "out of phase" actuation, and that a "snaking" structure in the bifurcation diagram (computed through standard, model-based numerical methods for dynamical systems) is also recovered through the EF/DDDAS methods operating on a black-box simulator. The EF/DDDAS protocols presented here are, therefore, a step towards general purpose protocols for performing detailed bifurcation analyses directly on laboratory experiments, not only on their mathematical models, but also on measured data.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Cycle-to-cycle variations in cross-flow turbine performance and flow fields
Authors:
Abigale Snortland,
Isabel Scherl,
Brian Polagye,
Owen Williams
Abstract:
Cross-flow turbine performance and flow fields exhibit cycle-to-cycle variations, though this is often implicitly neglected through time- and phase-averaging. This variability could potentially arise from a variety of mechanisms -- inflow fluctuations, the stochastic nature of dynamic stall, and cycle-to-cycle hysteresis -- each of which have different implications for our understanding of cross-f…
▽ More
Cross-flow turbine performance and flow fields exhibit cycle-to-cycle variations, though this is often implicitly neglected through time- and phase-averaging. This variability could potentially arise from a variety of mechanisms -- inflow fluctuations, the stochastic nature of dynamic stall, and cycle-to-cycle hysteresis -- each of which have different implications for our understanding of cross-flow turbine dynamics. In this work, the extent and sources of cycle-to-cycle variability for both the flow fields and performance are explored experimentally under two, contrasting operational conditions. Flow fields, obtained through two-dimensional planar particle image velocimetry inside the turbine swept area, are examined in concert with simultaneously measured performance. Correlations between flow-field and performance variability are established by an unsupervised hierarchical flow-field clustering pipeline. This features a principal component analysis (PCA) pre-processor that allows for clustering based on all the dynamics present in the high-dimensional flow-field data in an interpretable, low-dimensional subspace that is weighted by contribution to overall velocity variance. We find that the flow-field clusters and their associated performance are correlated primarily with inflow fluctuations, despite relatively low turbulence intensity, that drive variations in the timing of the dynamic stall process. Further, we find no evidence of substantial cycle-to-cycle hysteresis. Clustering reveals persistent correlations between performance and flow-field variability during the upstream portion of the turbine rotation. The approach employed here provides a more comprehensive picture of cross-flow turbine flow fields and performance than aggregate, statistical representations.
△ Less
Submitted 5 December, 2023; v1 submitted 6 February, 2023;
originally announced February 2023.
-
Long Spin Coherence and Relaxation Times in Nanodiamonds Milled from Polycrystalline $^{12}$C Diamond
Authors:
James E March,
Benjamin D Wood,
Colin J Stephen,
Laura Durán Fervenza,
Ben G Breeze,
Soumen Mandal,
Andrew M Edmonds,
Daniel J Twitchen,
Matthew L Markham,
Oliver A Williams,
Gavin W Morley
Abstract:
The negatively charged nitrogen-vacancy centre (NV$^-$) in diamond has been utilized in a wide variety of sensing applications. The centre's long spin coherence and relaxation times ($T_2^*$, $T_2$ and $T_1$) at room temperature are crucial to this, as they often limit sensitivity. Using NV$^-$ centres in nanodiamonds allows for operations in environments inaccessible to bulk diamond, such as intr…
▽ More
The negatively charged nitrogen-vacancy centre (NV$^-$) in diamond has been utilized in a wide variety of sensing applications. The centre's long spin coherence and relaxation times ($T_2^*$, $T_2$ and $T_1$) at room temperature are crucial to this, as they often limit sensitivity. Using NV$^-$ centres in nanodiamonds allows for operations in environments inaccessible to bulk diamond, such as intracellular sensing. We report long spin coherence and relaxation times at room temperature for single NV$^-$ centres in isotopically-purified polycrystalline ball-milled nanodiamonds. Using a spin-locking pulse sequence, we observe spin coherence times, $T_2$, up 786 $\pm$ 200 $μ$s. We also measure $T_2^*$ times up to 2.06 $\pm$ 0.24 $μ$s and $T_1$ times up to 4.32 $\pm$ 0.60 ms. Scanning electron microscopy and atomic force microscopy measurements show that the diamond containing the NV$^{-}$ centre with the longest $T_1$ time is smaller than 100 nm. EPR measurements give an N$_{s}$$^{0}$ concentration of 0.15 $\pm$ 0.02 ppm for the nanodiamond sample.
△ Less
Submitted 20 April, 2023; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Superconducting boron doped nanocrystalline diamond microwave coplanar resonator
Authors:
Jerome A. Cuenca,
Thomas Brien,
Soumen Mandal,
Scott Manifold,
Simon Doyle,
Adrian Porch,
Georgina M. Klemencic,
Oliver A. Williams
Abstract:
A superconducting boron doped nanocrystalline diamond (B-NCD) coplanar waveguide resonator (CPR) is presented for kinetic inductance ($L_k$) and penetration depth ($λ_{\rm{L}}$) measurements at microwave frequencies of 0.4 to 1.2 GHz and at temperatures below 3 K. Using a simplified effective medium CPR approach, this work demonstrates that thin granular B-NCD films ($t\approx $ 500 nm) on Si have…
▽ More
A superconducting boron doped nanocrystalline diamond (B-NCD) coplanar waveguide resonator (CPR) is presented for kinetic inductance ($L_k$) and penetration depth ($λ_{\rm{L}}$) measurements at microwave frequencies of 0.4 to 1.2 GHz and at temperatures below 3 K. Using a simplified effective medium CPR approach, this work demonstrates that thin granular B-NCD films ($t\approx $ 500 nm) on Si have a large penetration depth ($λ_{\rm{L}}\approx 4.3$ to 4.4 $μ$m), and therefore an associated high kinetic inductance ($L_{k,\square} \approx $ 670 to 690 pH/$\square$). These values are much larger than those typically obtained for films on single crystal diamond which is likely due to the significant granularity of the nanocrystalline films. Based on the measured Q factors of the structure, the calculated surface resistance in this frequency range is found to be as low as $\approx$ 2 to 4 $μΩ$ at $T<2$ K, demonstrating the potential for granular B-NCD for high quality factor superconducting microwave resonators and highly sensitive kinetic inductance detectors.
△ Less
Submitted 27 February, 2022;
originally announced February 2022.
-
Deep Learning-Assisted Co-registration of Full-Spectral Autofluorescence Lifetime Microscopic Images with H&E-Stained Histology Images
Authors:
Qiang Wang,
Susan Fernandes,
Gareth O. S. Williams,
Neil Finlayson,
Ahsan R. Akram,
Kevin Dhaliwal,
James R. Hopgood,
Marta Vallejo
Abstract:
Autofluorescence lifetime images reveal unique characteristics of endogenous fluorescence in biological samples. Comprehensive understanding and clinical diagnosis rely on co-registration with the gold standard, histology images, which is extremely challenging due to the difference of both images. Here, we show an unsupervised image-to-image translation network that significantly improves the succ…
▽ More
Autofluorescence lifetime images reveal unique characteristics of endogenous fluorescence in biological samples. Comprehensive understanding and clinical diagnosis rely on co-registration with the gold standard, histology images, which is extremely challenging due to the difference of both images. Here, we show an unsupervised image-to-image translation network that significantly improves the success of the co-registration using a conventional optimisation-based regression network, applicable to autofluorescence lifetime images at different emission wavelengths. A preliminary blind comparison by experienced researchers shows the superiority of our method on co-registration. The results also indicate that the approach is applicable to various image formats, like fluorescence intensity images. With the registration, stitching outcomes illustrate the distinct differences of the spectral lifetime across an unstained tissue, enabling macro-level rapid visual identification of lung cancer and cellular-level characterisation of cell variants and common types. The approach could be effortlessly extended to lifetime images beyond this range and other staining technologies.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Compressible Boundary Layer Velocity Transformation Based on a Generalized Form of the Total Stress
Authors:
Han Lee,
Pino Martin,
Owen Williams
Abstract:
The effects of density and viscosity fluctuations on the total stress balance are identified and used to create a new mean velocity transformation for compressible boundary layers. This work is enabled by an extensive database of direct numerical simulations that incorporate wall-cooling, semi-local Reynolds numbers ranging from 800 to 34000, and Mach numbers up to 12. The role, significance and p…
▽ More
The effects of density and viscosity fluctuations on the total stress balance are identified and used to create a new mean velocity transformation for compressible boundary layers. This work is enabled by an extensive database of direct numerical simulations that incorporate wall-cooling, semi-local Reynolds numbers ranging from 800 to 34000, and Mach numbers up to 12. The role, significance and physical mechanisms connecting density and viscosity fluctuations to the momentum balance and to the viscous, turbulent and total stresses are presented,allowing the creation of generalized formulations. We identify the significant properties that thus-far have been neglected in the derivation of velocity transformations: (1) the Machinvariance of the near-wall momentum balance for the generalized total stress, and (2) the Mach-invariance of the relative contributions from the generalized viscous and Reynolds stresses to the total stress. The proposed velocity transformation integrates both properties into a single transformation equation and successfully demonstrates a collapsing of all currently considered compressible cases onto the incompressible law of the wall, within the bounds of reported slope and intercept for incompressible data. Based on the physics embedded in the two scaling properties, the success of the newly proposed transformation is attributed to considering the effects of the viscous stress and turbulent stresses as well as mean and fluctuating density viscosity in a single transformation form.
△ Less
Submitted 24 February, 2023; v1 submitted 27 December, 2021;
originally announced December 2021.
-
Long Spin Coherence Times of Nitrogen Vacancy Centres in Milled Nanodiamonds
Authors:
B. D. Wood,
G. A. Stimpson,
J. E. March,
Y. N. D. Lekhai,
C. J. Stephen,
B. L. Green,
A. C. Frangeskou,
L. Ginés,
S. Mandal,
O. A. Williams,
G. W. Morley
Abstract:
Nanodiamonds containing negatively charged nitrogen vacancy centres (${\text{NV}}^{-}$) have applications as localized sensors in biological material and have been proposed as a platform to probe the macroscopic limits of spatial superposition and the quantum nature of gravity. A key requirement for these applications is to obtain nanodiamonds containing ${\text{NV}}^{-}$ with long spin coherence…
▽ More
Nanodiamonds containing negatively charged nitrogen vacancy centres (${\text{NV}}^{-}$) have applications as localized sensors in biological material and have been proposed as a platform to probe the macroscopic limits of spatial superposition and the quantum nature of gravity. A key requirement for these applications is to obtain nanodiamonds containing ${\text{NV}}^{-}$ with long spin coherence times. Using milling to fabricate nanodiamonds processes the full 3D volume of the bulk material at once, unlike etching, but has, up to now, limited ${\text{NV}}^{-}$ spin coherence times. Here, we use natural isotopic abundance nanodiamonds produced by ${\text{Si}}_{3}{\text{N}}_{4}$ ball milling of bulk diamond grown by chemical vapour deposition with an average single substitutional nitrogen concentration of $121 ~\text{ppb}$. We show that the electron spin coherence times of ${\text{NV}}^{-}$ centres in these nanodiamonds can exceed $400 ~μ\text{s}$ at room temperature with dynamical decoupling. Scanning electron microscopy provides images of the specific nanodiamonds containing ${\text{NV}}^{-}$ for which a spin coherence time was measured.
△ Less
Submitted 3 May, 2022; v1 submitted 3 December, 2021;
originally announced December 2021.
-
Microwave plasma modelling in clamshell chemical vapour deposition diamond reactors
Authors:
Jerome A. Cuenca,
Soumen Mandal,
Evan L. H. Thomas,
Oliver A. Williams
Abstract:
A microwave plasma model of a chemical vapour deposition (CVD) reactor is presented for understanding spatial heteroepitaxial growth of polycrystalline diamond on Si. This work is based on the TM0(n>1)p clamshell style reactor (Seki Diamond/ASTEX SDS 6K, Carat CTS6U, ARDIS-100 style) whereby a simplified H_2 plasma model is used to show the radial variation in growth rate over small samples with d…
▽ More
A microwave plasma model of a chemical vapour deposition (CVD) reactor is presented for understanding spatial heteroepitaxial growth of polycrystalline diamond on Si. This work is based on the TM0(n>1)p clamshell style reactor (Seki Diamond/ASTEX SDS 6K, Carat CTS6U, ARDIS-100 style) whereby a simplified H_2 plasma model is used to show the radial variation in growth rate over small samples with different sample holders. The model uses several steps: an electromagnetic (EM) eigenfrequency solution, a frequency-transient EM/plasma fluid solution and transient a heat transfer solution at low and high microwave power density. Experimental growths provide model validation with characterisation using Raman spectroscopy and scanning electron microscopy. This work demonstrates that shallow holders result in non-uniform diamond films, with a radial variation akin to the electron density and temperature distribution at the wafer surface. For the same process conditions, greater homogeneity is observed for taller holders, however, if the height is too extreme, the diamond quality reduces. From a modelling perspective, EM solutions are limited but useful for examining electric field focusing at the sample edges, resulting in accelerated diamond growth. For better accuracy, plasma fluid and heat transfer solutions are imperative for modelling spatial growth variation.
△ Less
Submitted 22 November, 2021; v1 submitted 19 November, 2021;
originally announced November 2021.
-
Positron Driven High-Field Terahertz Waves in Dielectric Material
Authors:
N. Majernik,
G. Andonian,
O. B. Williams,
B. D. O'Shea,
P. D. Hoang,
C. Clarke,
M. J. Hogan,
V. Yakimenko,
J. B. Rosenzweig
Abstract:
Advanced acceleration methods based on wakefields generated by high energy electron bunches passing through dielectric-based structures have demonstrated $>$GV/m fields, paving the first steps on a path to applications such as future compact linear colliders. For a collider scenario, it is desirable that, in contrast to plasmas, wakefields in dielectrics do not behave differently for positron and…
▽ More
Advanced acceleration methods based on wakefields generated by high energy electron bunches passing through dielectric-based structures have demonstrated $>$GV/m fields, paving the first steps on a path to applications such as future compact linear colliders. For a collider scenario, it is desirable that, in contrast to plasmas, wakefields in dielectrics do not behave differently for positron and electron bunches. In this Letter, we present measurements of large amplitude fields excited by positron bunches with collider-relevant parameters (energy 20 GeV, and $0.7 \times 10^{10}$ particles per bunch) in a 0.4 THz, cylindrically symmetric dielectric structure. Interferometric measurements of emitted coherent Cerenkov radiation permit spectral characterization of the positron-generated wakefields, which are compared to those excited by electron bunches. Statistical equivalence tests are incorporated to show the charge-sign invariance of the induced wakefield spectra. Transverse effects on positron beams resulting from off-axis excitation are examined and found to be consistent with the known linear response of the DWA system. The results are supported by numerical simulations and demonstrate high-gradient wakefield excitation in dielectrics for positron beams.
△ Less
Submitted 5 November, 2021;
originally announced November 2021.
-
Modeling Betatron Radiation Diagnostics for E-310 -- Trojan Horse
Authors:
M. Yadav,
C. Hansel,
Y. Zhuang,
B. Naranjo,
N. Majernik,
A. Perera,
Y. Sakai,
G. Andonian,
O. Williams,
P. Manwani,
J. Resta-Lopez,
O. Apsimon,
C. Welsch,
B. Hidding,
J. Rosenzweig
Abstract:
The E-310 experiment at the Facility for Advanced Accelerator Experimental Tests II (FACET-II) at SLAC National Accelerator Laboratory aims to demonstrate the creation of high brightness beams from a plasma photocathode. Betatron radiation will be measured by a Compton spectrometer, currently under development at UCLA, to provide single-shot, nondestructive beam diagnostics. We give a brief overvi…
▽ More
The E-310 experiment at the Facility for Advanced Accelerator Experimental Tests II (FACET-II) at SLAC National Accelerator Laboratory aims to demonstrate the creation of high brightness beams from a plasma photocathode. Betatron radiation will be measured by a Compton spectrometer, currently under development at UCLA, to provide single-shot, nondestructive beam diagnostics. We give a brief overview of this spectrometer as well as double differential spectrum reconstruction from the spectrometer image and beam parameter reconstruction from this double differential spectrum. We discuss three models for betatron radiation: an idealized particle tracking code which computes radiation from Liénard-Wiechert potentials, a quasi-static particle-in-cell (PIC) code which computes radiation from Liénard-Wiechert potentials, and a full PIC code which computes radiation using a Monte Carlo QED method. Spectra computed by the three models for a simple case are compared.
△ Less
Submitted 30 June, 2021;
originally announced July 2021.
-
Contact resistance of various metallisation schemes to superconducting boron doped diamond between 1.9 and 300 K
Authors:
Scott A. Manifold,
Georgina Klemencic,
Evan L. H. Thomas,
Soumen Mandal,
Henry Bland,
Sean R. Giblin,
Oliver A. Williams
Abstract:
Diamond is a material that offers potential in numerous device applications. In particular, highly boron doped diamond is attractive due to its superconductivity and high Young's Modulus. The fabrication of stable, low resistance, ohmic contacts is essential to ensure proper device function. Previous work has established the efficacy of several methods of forming suitable contacts to diamond at ro…
▽ More
Diamond is a material that offers potential in numerous device applications. In particular, highly boron doped diamond is attractive due to its superconductivity and high Young's Modulus. The fabrication of stable, low resistance, ohmic contacts is essential to ensure proper device function. Previous work has established the efficacy of several methods of forming suitable contacts to diamond at room temperature and above, including carbide forming and carbon soluble metallisation schemes. Herein, the stability of several contact schemes (Ti, Cr, Mo, Ta and Pd) to highly boron doped nanocrystalline diamond was verified down to the cryogenic temperatures with modified Transmission Line Model (TLM) measurements. While all contact schemes remained ohmic, a significant temperature dependency is noted at Tc and at the lowest temperatures the contact resistances ranged from Ti/Pt/Au with ${(8.83 \pm 0.10)\times 10^{-4} \:Ω.cm}$ to Ta/Pt/Au with ${(8.07 \pm 0.62) \times 10^{-6} \:Ω.cm}$.
△ Less
Submitted 6 May, 2021;
originally announced May 2021.
-
Non-linear propagation effects of intense femtosecond pulses on low order harmonics in solids
Authors:
Mukhtar Hussain,
Gareth O Williams,
Tayyab Imran,
Marta Fajardo
Abstract:
The non-linear propagation of the intense near-infrared (NIR) driving field in wide bandgap materials pose a challenge and an opportunity to control the spectral properties of high harmonic generation (HHG) in solids. Here, we have investigated the non-linear propagation effects of the ultrafast intense near-infrared (NIR) driving field at 800 nm of 40 fs pulse duration operating at a repetition r…
▽ More
The non-linear propagation of the intense near-infrared (NIR) driving field in wide bandgap materials pose a challenge and an opportunity to control the spectral properties of high harmonic generation (HHG) in solids. Here, we have investigated the non-linear propagation effects of the ultrafast intense near-infrared (NIR) driving field at 800 nm of 40 fs pulse duration operating at a repetition rate of 1 kHz focused on the wide bandgap dielectrics such as MgO, Chromium (Cr) doped MgO (Cr: MgO), Sapphire (Sa) crystals and fused silica (FS). Furthermore, we have generated second and third harmonic (TH) in these materials to explore the non-linear response at a strong field. To quantify the non-linear propagation effects, low-order harmonics have been generated in reflection and compared with the harmonics generated in transmission. We observe spectral shifts and broadening of the driving field spectrum which is imprinted on the harmonics. We attribute these effects to strong photoionization, generation of free-carrier density and self-phase modulation effects. We have also studied the polarization dependence of second harmonic generation (SHG) and TH in FS. The linear polarization dependence of below bandgap harmonics in FS and Sa generated in reflection demonstrated the sharp anisotropy than in transmission. This work shows the sensitivity to control the spectral profile of harmonics by manipulating the driving field, showing the possibility of new tailored solid-state XUV sources for optical diagnostics.
△ Less
Submitted 21 April, 2021;
originally announced April 2021.
-
Surface zeta potential and diamond growth on gallium oxide single crystal
Authors:
Soumen Mandal,
Karsten Arts,
Harm C. M. Knoops,
Jerome Cuenca,
Georgina Klemencic,
Oliver A. Williams
Abstract:
In this work a strategy to grow diamond on $β$-Ga$_2$O$_3$ has been presented. The $ζ$-potential of the $β$-Ga$_2$O$_3$ substrate was measured and it was found to be negative with an isoelectric point at pH $\sim$ 4.6. The substrates were seeded with mono-dispersed diamond solution for growth of diamond. The seeded substrates were etched when exposed to diamond growth plasma and globules of galliu…
▽ More
In this work a strategy to grow diamond on $β$-Ga$_2$O$_3$ has been presented. The $ζ$-potential of the $β$-Ga$_2$O$_3$ substrate was measured and it was found to be negative with an isoelectric point at pH $\sim$ 4.6. The substrates were seeded with mono-dispersed diamond solution for growth of diamond. The seeded substrates were etched when exposed to diamond growth plasma and globules of gallium could be seen on the surface. To overcome the problem $\sim$100 nm of SiO$_2$ and Al$_2$O$_3$ were deposited using atomic layer deposition. The nanodiamond seeded SiO$_2$ layer was effective in protecting the $β$-Ga$_2$O$_3$ substrate and thin diamond layers could be grown. In contrast Al$_2$O$_3$ layers were damaged when exposed to diamond growth plasma. The thin diamond layers were characterised with scanning electron microscopy and Raman spectroscopy. Raman spectroscopy revealed the diamond layer to be under compressive stress of 1.3 -- 2.8GPa.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Spectral control of high order harmonics through non-linear propagation effects
Authors:
M. Hussain,
S. Kaassamani,
T. Auguste,
W. Boutu,
D. Gauthier,
M. Kholodtsova,
J-T. Gomes,
L. Lavoute,
D. Gaponov,
N. Ducros,
S. Fevrier,
R. Nicolas,
T. Imran,
G. O. Williams,
M. Fajardo,
H. Merdji
Abstract:
High harmonic generation (HHG) in crystals has revealed a wealth of perspectives such as all-optical map** of the electronic band structure, ultrafast quantum information and the creation of novel all-solid-state attosecond sources. Significant efforts have been made to understand the microscopic aspects of HHG in crystals, whereas the macroscopic effects, such as non-linear propagation effects…
▽ More
High harmonic generation (HHG) in crystals has revealed a wealth of perspectives such as all-optical map** of the electronic band structure, ultrafast quantum information and the creation of novel all-solid-state attosecond sources. Significant efforts have been made to understand the microscopic aspects of HHG in crystals, whereas the macroscopic effects, such as non-linear propagation effects of the driving pulse inside the dense solid media and its impact on the HHG process is often overlooked. In this work, we study macroscopic effects by comparing two materials with distinct optical properties, silicon (Si) and zinc oxide (ZnO). By scanning the focal position of 85 fs, 2.123 $μ$m wavelength pulses inside the crystals (Z-scan) we reveal spectral shifts in the generated harmonics. We interpret the overall blueshift of the emitted harmonic spectrum as an imprint of the driving field spectral modulation occurring during the propagation inside the crystal. This is supported with numerical simulations. This study demonstrates that through manipulation of the fundamental driving field through non-linear propagation effects, precise control of the emitted HHG spectrum in solids can be realised. This method could offer a robust way to tailor HHG spectra for a range of spectroscopic applications.
△ Less
Submitted 21 March, 2021;
originally announced March 2021.
-
Thermal stress modelling of diamond on GaN/III-Nitride membranes
Authors:
Jerome A. Cuenca,
Matthew D. Smith,
Daniel E. Field,
Fabien C-P. Massabuau,
Soumen Mandal,
James Pomeroy,
David J. Wallis,
Rachel A. Oliver,
Iain Thayne,
Martin Kuball,
Oliver A. Williams
Abstract:
Diamond heat-spreaders for gallium nitride (GaN) devices currently depend upon a robust wafer bonding process. Bonding-free membrane methods demonstrate potential, however, chemical vapour deposition (CVD) of diamond directly onto a III-nitride (III-N) heterostructure membrane induces significant thermal stresses. In this work, these thermal stresses are investigated using an analytical approach,…
▽ More
Diamond heat-spreaders for gallium nitride (GaN) devices currently depend upon a robust wafer bonding process. Bonding-free membrane methods demonstrate potential, however, chemical vapour deposition (CVD) of diamond directly onto a III-nitride (III-N) heterostructure membrane induces significant thermal stresses. In this work, these thermal stresses are investigated using an analytical approach, a numerical model and experimental validation. The thermal stresses are caused by the mismatch in the coefficient of thermal expansion (CTE) between the GaN/III-N stack, silicon (Si) and the diamond from room temperature to CVD growth temperatures. Simplified analytical wafer bow models underestimate the membrane bow for small sizes while numerical models replicate the stresses and bows with increased accuracy using temperature gradients. The largest tensile stress measured using Raman spectroscopy at room temperature was approximately 1.0 $\pm0.2$ GPa while surface profilometry shows membrane bows as large as \SI{58}{\micro\metre}. This large bow is caused by additional stresses from the Si frame in the initial heating phase which are held in place by the diamond and highlights challenges for any device fabrication using contact lithography. However, the bow can be reduced if the membrane is pre-stressed to become flat at CVD temperatures. In this way, a sufficient platform to grow diamond on GaN/III-N structures without wafer bonding can be realised.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Phase Slips and Metastability in Granular Boron-doped Nanocrystalline Diamond Microbridges
Authors:
G. M. Klemencic,
D. T. S. Perkins,
J. M. Fellows,
C. M. Muirhead,
R. A. Smith,
S. Mandal,
S. Manifold,
M. Salman,
S. R. Giblin,
O. A. Williams
Abstract:
A phase slip is a localized disturbance in the coherence of a superconductor allowing an abrupt 2$π$ phase shift. Phase slips are a ubiquitous feature of one-dimensional superconductors and also have an analogue in two-dimensions. Here we present electrical transport measurements on boron-doped nanocrystalline diamond (BNCD) microbridges where, despite their three-dimensional macroscopic geometry,…
▽ More
A phase slip is a localized disturbance in the coherence of a superconductor allowing an abrupt 2$π$ phase shift. Phase slips are a ubiquitous feature of one-dimensional superconductors and also have an analogue in two-dimensions. Here we present electrical transport measurements on boron-doped nanocrystalline diamond (BNCD) microbridges where, despite their three-dimensional macroscopic geometry, we find clear evidence of phase slippage in both the resistance-temperature and voltage-current characteristics. We attribute this behavior to the unusual microstructure of BNCD. We argue that the columnar crystal structure of BNCD forms an intrinsic Josephson junction array that supports a line of phase slippage across the microbridge. The voltage-state in these bridges is metastable and we demonstrate the ability to switch deterministically between different superconducting states by applying electromagnetic noise pulses. This metastability is remarkably similar to that observed in $δ$-MoN nanowires, but with a vastly greater response voltage.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Sensitivity of the SHiP experiment to dark photons decaying to a pair of charged particles
Authors:
SHiP Collaboration,
C. Ahdida,
A. Akmete,
R. Albanese,
A. Alexandrov,
A. Anokhina,
S. Aoki,
G. Arduini,
E. Atkin,
N. Azorskiy,
J. J. Back,
A. Bagulya,
F. Baaltasar Dos Santos,
A. Baranov,
F. Bardou,
G. J. Barker,
M. Battistin,
J. Bauche,
A. Bay,
V. Bayliss,
G. Bencivenni,
A. Y. Berdnikov,
Y. A. Berdnikov,
M. Bertani,
C. Betancourt
, et al. (309 additional authors not shown)
Abstract:
Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different pro…
▽ More
Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different production mechanisms are simulated, with the dark photons decaying to pairs of visible fermions, including both leptons and quarks. Exclusion contours are presented and compared with those of past experiments. The SHiP detector is expected to have a unique sensitivity for m$_{γ^{\mathrm{D}}}$ ranging between 0.8 and 3.3$^{+0.2}_{-0.5}$ GeV, and $\varepsilon^2$ ranging between $10^{-11}$ and $10^{-17}$.
△ Less
Submitted 1 March, 2021; v1 submitted 10 November, 2020;
originally announced November 2020.
-
A primary electron beam facility at CERN -- eSPS Conceptual design report
Authors:
M. Aicheler,
T. Akesson,
F. Antoniou,
A. Arnalich,
P. A. Arrutia Sota,
P. Bettencourt Moniz Cabral,
D. Bozzini,
M. Brugger,
O. Brunner,
P. N. Burrows,
R. Calaga,
M. J. Capstick,
R. Corsini,
S. Doebert,
L. A. Dougherty,
Y. Dutheil,
L. A. Dyks,
O. Etisken,
L. Evans,
A. Farricker,
R. Fernandez Ortega,
M. A. Fraser,
J. Gall,
S. J. Gessner,
B. Goddard
, et al. (30 additional authors not shown)
Abstract:
The design of a primary electron beam facility at CERN is described. The study has been carried out within the framework of the wider Physics Beyond Colliders study. It re-enables the Super Proton Synchrotron (SPS) as an electron accelerator, and leverages the development invested in Compact Linear Collider (CLIC) technology for its injector and as an accelerator research and development infrastru…
▽ More
The design of a primary electron beam facility at CERN is described. The study has been carried out within the framework of the wider Physics Beyond Colliders study. It re-enables the Super Proton Synchrotron (SPS) as an electron accelerator, and leverages the development invested in Compact Linear Collider (CLIC) technology for its injector and as an accelerator research and development infrastructure. The facility would be relevant for several of the key priorities in the 2020 update of the European Strategy for Particle Physics, such as an electron-positron Higgs factory, accelerator R\&D, dark sector physics, and neutrino physics. In addition, it could serve experiments in nuclear physics. The electron beam delivered by this facility would provide access to light dark matter production significantly beyond the targets predicted by a thermal dark matter origin, and for natures of dark matter particles that are not accessible by direct detection experiments. It would also enable electro-nuclear measurements crucial for precise modelling the energy dependence of neutrino-nucleus interactions, which is needed to precisely measure neutrino oscillations as a function of energy. The implementation of the facility is the natural next step in the development of X-band high-gradient acceleration technology, a key technology for compact and cost-effective electron/positron linacs. It would also become the only facility with multi-GeV drive bunches and truly independent electron witness bunches for plasma wakefield acceleration. A second phase capable to deliver positron witness bunches would make it a complete facility for plasma wakefield collider studies. [...]
△ Less
Submitted 21 December, 2020; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Simulations of Intracycle Angular Velocity Control for a Cross-Flow Turbine
Authors:
Mukul Dave,
Benjamin Strom,
Abigale Snortland,
Owen Williams,
Brian Polagye,
Jennifer A. Franck
Abstract:
Straight-bladed cross-flow turbines are computationally explored for harvesting energy in wind and water currents. One challenge for cross-flow turbines is the transient occurrence of high apparent angles of attack on the blades that reduces efficiency due to flow separation. This paper explores kinematic manipulation of the apparent angle of attack through intracycle control of the angular veloci…
▽ More
Straight-bladed cross-flow turbines are computationally explored for harvesting energy in wind and water currents. One challenge for cross-flow turbines is the transient occurrence of high apparent angles of attack on the blades that reduces efficiency due to flow separation. This paper explores kinematic manipulation of the apparent angle of attack through intracycle control of the angular velocity. Using an unsteady Reynolds-averaged Navier-Stokes (URANS) model at moderate Reynolds numbers, the kinematics and associated flow physics are explored for confined and unconfined configurations. The computations demonstrate an increase in turbine efficiency up to 54%, very closely matching the benefits shown by previous intracycle control experiments. Simulations display the time-evolution of angle of attack and flow velocity relative to the blade, which are modified with sinusoidal angular velocity such that the peak torque generation aligns with the peak angular velocity. With optimal kinematics in a confined flow there is minimal flow separation during peak power generation, however there is a large trailing edge vortex (TEV) shed as the torque decreases. The unconfined configuration has more prominent flow separation and is more susceptible to Reynolds number, resulting in a 41% increase in power generation under the same kinematic conditions as the confined flow.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
The shape of memory in temporal networks
Authors:
Oliver E. Williams,
Lucas Lacasa,
Ana P. Millán,
Vito Latora
Abstract:
Temporal networks are widely used models for describing the architecture of complex systems. Network memory -- that is the dependence of a temporal network's structure on its past -- has been shown to play a prominent role in diffusion, epidemics and other processes occurring over the network, and even to alter its community structure. Recent works have proposed to estimate the length of memory in…
▽ More
Temporal networks are widely used models for describing the architecture of complex systems. Network memory -- that is the dependence of a temporal network's structure on its past -- has been shown to play a prominent role in diffusion, epidemics and other processes occurring over the network, and even to alter its community structure. Recent works have proposed to estimate the length of memory in a temporal network by using high-order Markov models. Here we show that network memory is inherently multidimensional and cannot be meaningfully reduced to a single scalar quantity. Accordingly, we introduce a mathematical framework for defining and efficiently estimating the microscopic shape of memory, which fully characterises how the activity of each link intertwines with the activities of all other links. We validate our methodology on a wide range of synthetic models of temporal networks with tuneable memory, and subsequently study the heterogeneous shapes of memory emerging in various real-world networks.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
SND@LHC
Authors:
SHiP Collaboration,
C. Ahdida,
A. Akmete,
R. Albanese,
A. Alexandrov,
M. Andreini,
A. Anokhina,
S. Aoki,
G. Arduini,
E. Atkin,
N. Azorskiy,
J. J. Back,
A. Bagulya,
F. Baaltasar Dos Santos,
A. Baranov,
F. Bardou,
G. J. Barker,
M. Battistin,
J. Bauche,
A. Bay,
V. Bayliss,
G. Bencivenni,
A. Y. Berdnikov,
Y. A. Berdnikov,
M. Bertani
, et al. (319 additional authors not shown)
Abstract:
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)…
▽ More
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
SPS Beam Dump Facility -- Comprehensive Design Study
Authors:
C. Ahdida,
R. G. Alia,
G. Arduini,
A. Arnalich,
P. Avigni,
F. Bardou,
M. Battistin,
J. Bauche,
M. Brugger,
J. Busom,
M. Calviani,
M. Casolino,
N. Colonna,
L. Dougherty,
Y. Dutheil,
E. Fornasiere,
M. A. Fraser,
L. Gatignon,
J. Gall,
S. Gilardoni,
B. Goddard,
J-L. Grenard,
D. Grenier,
C. Hessler,
R. Jacobsson
, et al. (23 additional authors not shown)
Abstract:
The proposed Beam Dump Facility (BDF) is foreseen to be located at the North Area of the SPS. It is designed to be able to serve both beam dump like and fixed target experiments. The SPS and the new facility would offer unique possibilities to enter a new era of exploration at the intensity frontier. Possible options include searches for very weakly interacting particles predicted by Hidden Sector…
▽ More
The proposed Beam Dump Facility (BDF) is foreseen to be located at the North Area of the SPS. It is designed to be able to serve both beam dump like and fixed target experiments. The SPS and the new facility would offer unique possibilities to enter a new era of exploration at the intensity frontier. Possible options include searches for very weakly interacting particles predicted by Hidden Sector models, and flavour physics measurements. In the first instance, exploitation of the facility, in beam dump mode, is envisaged to be for the Search for Hidden Particle (SHiP) experiment.
Following the first evaluation of the BDF in 2014-2016, CERN management launched a Comprehensive Design Study over three years for the facility. The BDF study team has since executed an in-depth feasibility study of proton delivery to target, the target complex, and the underground experimental area, including prototy** of key sub-systems and evaluations of the radiological aspects and safety. A first iteration of detailed integration and civil engineering studies have been performed in order to produce a realistic schedule and cost. This document gives a detailed overview of the proposed facility together with the results of the studies, and draws up a possible road map for a three-year Technical Design Report phase, followed by a 5 to 6 year construction phase.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
High-Throughput Detection and Manipulation of Single Nitrogen-Vacancy Center's Charge in Nanodiamonds
Authors:
Maabur Sow,
Horst Steuer,
Sanmi Adekanye,
Laia Ginés,
Soumen Mandal,
Barak Gilboa,
Oliver A. Williams,
Jason M. Smith,
Achillefs N. Kapanidis
Abstract:
The fluorescent nitrogen-vacancy (NV) defect in diamond has remarkable photophysical properties, including high photostability, which allows stable fluorescence emission for hours; as a result, there has been much interest in using nanodiamonds (NDs) for quantum optics and biological imaging. Such applications have been limited by the complexity and heterogeneity of ND photophysics. Photophysics o…
▽ More
The fluorescent nitrogen-vacancy (NV) defect in diamond has remarkable photophysical properties, including high photostability, which allows stable fluorescence emission for hours; as a result, there has been much interest in using nanodiamonds (NDs) for quantum optics and biological imaging. Such applications have been limited by the complexity and heterogeneity of ND photophysics. Photophysics of the NV center in NDs have been studied before, but the lack of a sensitive and high-throughput method has limited the characterization of NDs. Here is reported a systematic analysis of NDs using two-color wide-field epifluorescence imaging coupled to high-throughput single-particle detection of single NVs in NDs with sizes down to 5-10 nm. By using fluorescence intensity ratios, the charge conversion of single NV center (NV- or NV0) is observed and the lifetimes of different NV charge states in NDs is measured. The discovery of reversible manipulation of NV charge states by pH is also presented. In addition to provide another mechanism to control the NV charge state in nanodiamonds, our findings open the possibility to perform pH nanosensing with a non-photobleachable probe.
△ Less
Submitted 29 September, 2019;
originally announced September 2019.
-
Non-Markovian temporal networks with auto- and cross-correlated link dynamics
Authors:
Oliver E. Williams,
Piero Mazzarisi,
Fabrizio Lillo,
Vito Latora
Abstract:
Many of the biological, social and man-made networks around us are inherently dynamic, with their links switching on and off over time. The evolution of these networks is often non-Markovian, and the dynamics of their links correlated. Hence, to accurately model these networks, predict their evolution, and understand how information and other quantities propagate over them, the inclusion of both m…
▽ More
Many of the biological, social and man-made networks around us are inherently dynamic, with their links switching on and off over time. The evolution of these networks is often non-Markovian, and the dynamics of their links correlated. Hence, to accurately model these networks, predict their evolution, and understand how information and other quantities propagate over them, the inclusion of both memory and dynamical dependencies between links is key. We here introduce a general class of models of temporal networks based on discrete autoregressive processes. As a case study we concentrate on a specific model within this class, generating temporal networks with a specified underlying backbone, and with precise control over the dynamical dependencies between links and the strength and length of their memories. In this network model the presence of each link is influenced by its own past activity and the past activities of other links, as specified by a coupling matrix, which directly controls the causal relations and correlations among links. We propose a method for estimating the models parameters and how to deal with heterogeneity and time-varying patterns, showing how the model allows for a more realistic description of real world temporal networks and also to predict their evolution. We then investigate the role that memory and correlations in link dynamics have on processes occurring over a temporal network by studying the speed of a spreading process, as measured by the time it takes for diffusion to reach equilibrium. Through both numerical simulations and analytical results, we are able to separate the roles of autocorrelations and neighbourhood correlations in link dynamics, showing that the speed of diffusion is non-monotonically dependent on the memory length, and that correlations among neighbouring links can speed up the spreading process, while autocorrelations slow it down.
△ Less
Submitted 22 July, 2021; v1 submitted 17 September, 2019;
originally announced September 2019.
-
Thick adherent diamond films on AlN with low thermal barrier resistance
Authors:
Soumen Mandal,
Jerome Cuenca,
Fabien Massabuau,
Chao Yuan,
Henry Bland,
James W. Pomeroy,
David Wallis,
Tim Batten,
David Morgan,
Rachel Oliver,
Martin Kuball,
Oliver A. Williams
Abstract:
Growth of $>$100 $μ$m thick diamond layer adherent on aluminium nitride is presented in this work. While thick films failed to adhere on untreated AlN films, hydrogen/nitrogen plasma treated AlN films retained the thick diamond layers. Clear differences in zeta potential measurement confirms the surface modification due to hydrogen/nitrogen plasma treatment. Areal Raman maps showed an increase in…
▽ More
Growth of $>$100 $μ$m thick diamond layer adherent on aluminium nitride is presented in this work. While thick films failed to adhere on untreated AlN films, hydrogen/nitrogen plasma treated AlN films retained the thick diamond layers. Clear differences in zeta potential measurement confirms the surface modification due to hydrogen/nitrogen plasma treatment. Areal Raman maps showed an increase in non-diamond carbon in the initial layers of diamond grown on pre-treated AlN. The presence of non-diamond carbon has minimal effect on the interface between diamond and AlN. The surfaces studied with x-ray photoelectron spectroscopy (XPS) revealed a clear distinction between pre-treated and untreated samples. The surface aluminium goes from nitrogen rich environment to an oxygen rich environment after pre-treatment. Cross section transmission electron microscopy shows a clean interface between diamond and AlN. Thermal barrier resistance between diamond and AlN was found to be in the range of 16 m$^2$K/GW which is a large improvement on the current state-of-the-art.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
Dielectric spectroscopy of hydrogenated hexagonal boron nitride ceramics
Authors:
Jerome A. Cuenca,
Soumen Mandal,
Malcolm Snowball,
Adrian Porch,
Oliver A. Williams
Abstract:
Hexagonal boron nitride (h-BN) is a critical material for 2D electronic devices for graphene and has attracted a considerable amount of attention owing to its structural similarity and semiconducting property. However, modifying its wide-band gap is a challenge. Hydrogenation is a potential method of altering the electrical properties, although is seldom experimentally measured. Here, the complex…
▽ More
Hexagonal boron nitride (h-BN) is a critical material for 2D electronic devices for graphene and has attracted a considerable amount of attention owing to its structural similarity and semiconducting property. However, modifying its wide-band gap is a challenge. Hydrogenation is a potential method of altering the electrical properties, although is seldom experimentally measured. Here, the complex permittivity of h-BN after various hydrogen treatments have been investigated. For untreated h-BN, a frequency independent dielectric constant was measured ($\sim4.2 \pm0.2$) and an immeasurably low dielectric loss, demonstrating the ideal dielectric nature of h-BN across the $10^3$ to $10^{10}$ Hz range. However, after atomic H-plasma treatment in a microwave chemical vapour deposition (CVD) reactor, the complex permittivity amplifies dramatically, introducing dielectric dispersion through Debye-type dielectric relaxations ($\varepsilon_{\textrm{s}}\approx20\pm2$, $\varepsilon_{\infty}\approx4.2\pm0.2$) and a percolating long range conductivity ($\sim0.32$ mS/m). Annealing in molecular hydrogen at similar CVD temperatures showed minimal effect. Raman spectroscopy also detected minimal change in all samples, implying the increase is not due to other phases. This leads to the experimental conclusion that hydrogenation, through atomic H-plasma treatment, results in a moderate increase in room temperature electrical conductivity, an associated finite dielectric loss factor. The potential as a tunable wide-band gap semiconductor is highlighted however for insulating dielectric substrate applications, microwave CVD may destroy these desirable properties.
△ Less
Submitted 11 November, 2019; v1 submitted 14 June, 2019;
originally announced June 2019.
-
Robust Principal Component Analysis for Modal Decomposition of Corrupt Fluid Flows
Authors:
Isabel Scherl,
Benjamin Strom,
Jessica K. Shang,
Owen Williams,
Brian L. Polagye,
Steven L. Brunton
Abstract:
Modal analysis techniques are used to identify patterns and develop reduced-order models in a variety of fluid applications. However, experimentally acquired flow fields may be corrupted with incorrect and missing entries, which may degrade modal decomposition. Here we use robust principal component analysis (RPCA) to improve the quality of flow field data by leveraging global coherent structures…
▽ More
Modal analysis techniques are used to identify patterns and develop reduced-order models in a variety of fluid applications. However, experimentally acquired flow fields may be corrupted with incorrect and missing entries, which may degrade modal decomposition. Here we use robust principal component analysis (RPCA) to improve the quality of flow field data by leveraging global coherent structures to identify and replace spurious data points. RPCA is a robust variant of principal component analysis (PCA), also known as proper orthogonal decomposition (POD) in fluids, that decomposes a data matrix into the sum of a low-rank matrix containing coherent structures and a sparse matrix of outliers and corrupt entries. We apply RPCA filtering to a range of fluid simulations and experiments of varying complexities and assess the accuracy of low-rank structure recovery. First, we analyze direct numerical simulations of flow past a circular cylinder at Reynolds number 100 with artificial outliers, alongside similar PIV measurements at Reynolds number 413. Next, we apply RPCA filtering to a turbulent channel flow simulation from the Johns Hopkins Turbulence database, demonstrating that dominant coherent structures are preserved in the low-rank matrix. Finally, we investigate PIV measurements behind a two-bladed cross-flow turbine that exhibits both broadband and coherent phenomena. In all cases, we find that RPCA filtering extracts dominant coherent structures and identifies and fills in incorrect or missing measurements. The performance is particularly striking when flow fields are analyzed using dynamic mode decomposition, which is sensitive to noise and outliers.
△ Less
Submitted 13 December, 2019; v1 submitted 16 May, 2019;
originally announced May 2019.
-
Superconducting boron doped nanocrystalline diamond on boron nitride ceramics
Authors:
Soumen Mandal,
Henry A. Bland,
Jerome A. Cuenca,
Malcolm Snowball,
Oliver A. Williams
Abstract:
In this work we have demonstrated the growth of nanocrystalline diamond on boron nitride ceramic. We measured the zeta potential of the ceramics to select the diamond seeds. Diamond was then grown on the seeded ceramics using a microwave chemical vapour deposition system. A clear difference was found between the samples which were seeded with nanodiamond and the ones not seeded before growth. Rama…
▽ More
In this work we have demonstrated the growth of nanocrystalline diamond on boron nitride ceramic. We measured the zeta potential of the ceramics to select the diamond seeds. Diamond was then grown on the seeded ceramics using a microwave chemical vapour deposition system. A clear difference was found between the samples which were seeded with nanodiamond and the ones not seeded before growth. Raman spectroscopy confirmed the excellent quality of the diamond film. Dielectric measurements showed an increase in the dielectric constant of the material after diamond growth. The diamond was also doped with boron to make it superconducting. The film had a transition temperature close to 3.4K. Similar strategies can be applied for growth of diamond on other types of ceramics.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
Controlling the nonlinear optical properties of MgO by tailoring the electronic structure
Authors:
Mukhtar Hussain,
Hugo Pires,
Willem Boutu,
Dominik Franz,
Rana Nicolas,
Tayyab Imran,
Hamed Merdji,
Marta Fajardo,
Gareth Oisin Williams
Abstract:
The study of the non-linear response of matter to high electric fields has recently encompassed harmonic generation in solids at near-infrared (NIR) driving wavelengths. Interest has been driven by the prospect of ultrafast signal processing and all-optical map** of electron wave-functions in solids. Engineering solid-state band structures to control the non-linear process has already been highl…
▽ More
The study of the non-linear response of matter to high electric fields has recently encompassed harmonic generation in solids at near-infrared (NIR) driving wavelengths. Interest has been driven by the prospect of ultrafast signal processing and all-optical map** of electron wave-functions in solids. Engineering solid-state band structures to control the non-linear process has already been highlighted theoretically. Here, we show experimentally for the first time that second harmonic generation (SHG) can be enhanced by do** crystals of magnesium oxide (MgO) with chromium (Cr) atoms. We show that the degree of enhancement depends non-linearly on dopant concentration. The SHG efficiency is shown to increase when Cr dopants are introduced into pure MgO. A physical picture of the effect of Cr dopants is aided by density functional theory (DFT) calculations of the electronic structure for pure and doped samples. This work shows an unambiguous enhancement of the SHG efficiency by modifying the electronic structure. The observed effects are consistent with an electronic structure that facilitates the surface induced SHG and demonstrates a minimal angular dependence. This work highlights the potential of manipulating the electronic structure of solids to control or test theories of their non-linear optical response.
△ Less
Submitted 13 January, 2020; v1 submitted 5 April, 2019;
originally announced April 2019.
-
Impact of free electron degeneracy on collisional rates in plasmas
Authors:
Gareth O. Williams,
H. -K. Chung,
S. Künzel,
V. Hilbert,
U. Zastrau,
H. Scott,
S. Daboussi,
B. Iwan,
A. I. Gonzalez,
W. Boutu,
H. J. Lee,
B. Nagler,
E. Granados,
E. Galtier,
P. Heimann,
B. Barbrel,
R. W. Lee,
B. I. Cho,
P. Renaudin,
H. Merdji,
Ph. Zeitoun,
M. Fajardo
Abstract:
Degenerate plasmas, in which quantum effects dictate the behavior of free electrons, are ubiquitous on earth and throughout space. Transitions between bound and free electron states determine basic plasma properties, yet the effects of degeneracy on these transitions have only been theorized. Here, we use an x-ray free electron laser to create and characterize a degenerate plasma. We observe a cor…
▽ More
Degenerate plasmas, in which quantum effects dictate the behavior of free electrons, are ubiquitous on earth and throughout space. Transitions between bound and free electron states determine basic plasma properties, yet the effects of degeneracy on these transitions have only been theorized. Here, we use an x-ray free electron laser to create and characterize a degenerate plasma. We observe a core electron fluorescence spectrum that cannot be reproduced by models that ignore free electron degeneracy.We show that degeneracy acts to restrict the available electron energy states, thereby slowing the rate of transitions to and from the continuum. We couple degeneracy and bound electron dynamics in an existing collisional-radiative code, which agrees well with observations. The impact of the shape of the cross section, and hence the magnitude of the correction due to degeneracy, is also discussed. This study shows that degeneracy in plasmas can significantly influence experimental observables such as the emission spectra, and that these effects can be included parametrically in well-established atomic physics codes. This work narrows the gap in understanding between the condensed-matter and plasma phases, which coexist in myriad scenarios.
△ Less
Submitted 6 January, 2020; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Quantitative analysis of the interaction between a dc SQUID and an integrated micromechanical doubly clamped cantilever
Authors:
Majdi Salman,
Georgina M Klemencic,
Soumen Mandal,
Scott Manifold,
Luqman Mustafa,
Oliver A Williams,
Sean R Giblin
Abstract:
Based on the superconducting quantum interference device (SQUID) equations described by the resistively- and capacitively-shunted junction model coupled to the equation of motion of a damped harmonic oscillator, we provide simulations to quantitatively describe the interaction between a dc SQUID and an integrated doubly clamped cantilever. We have chosen to investigate an existing experimental con…
▽ More
Based on the superconducting quantum interference device (SQUID) equations described by the resistively- and capacitively-shunted junction model coupled to the equation of motion of a damped harmonic oscillator, we provide simulations to quantitatively describe the interaction between a dc SQUID and an integrated doubly clamped cantilever. We have chosen to investigate an existing experimental configuration and have explored the motion of the cantilever and the reaction of the SQUID as a function of the voltage-flux $V(Φ)$ characteristics. We clearly observe the Lorentz force back-action interaction and demonstrate how a sharp transition state drives the system into a nonlinear-like regime, and modulates the cantilever displacement amplitude, simply by tuning the SQUID parameters.
△ Less
Submitted 8 February, 2019;
originally announced February 2019.
-
Quantifying and predicting success in show business
Authors:
Oliver E. Williams,
Lucas Lacasa,
Vito Latora
Abstract:
Recent studies in the science of success have shown that the highest-impact works of scientists or artists happen randomly and uniformly over the individual's career. Yet in certain artistic endeavours, such as acting in films and TV, having a job is perhaps the most important achievement: success is simply making a living. By analysing a large online database of information related to films and t…
▽ More
Recent studies in the science of success have shown that the highest-impact works of scientists or artists happen randomly and uniformly over the individual's career. Yet in certain artistic endeavours, such as acting in films and TV, having a job is perhaps the most important achievement: success is simply making a living. By analysing a large online database of information related to films and television we are able to study the success of those working in the entertainment industry. We first support our initial claim, finding that two in three actors are "one-hit wonders". In addition we find that, in agreement with previous works, activity is clustered in hot streaks, and the percentage of careers where individuals are active is unpredictable. However, we also discover that productivity in show business has a range of distinctive features, which are predictable. We unveil the presence of a rich-get-richer mechanism underlying the assignment of jobs, with a Zipf law emerging for total productivity. We find that productivity tends to be highest at the beginning of a career and that the location of the "annus mirabilis" -- the most productive year of an actor -- can indeed be predicted. Based on these stylized signatures we then develop a machine learning method which predicts, with up to 85% accuracy, whether the annus mirabilis of an actor has yet passed or if better days are still to come. Finally, our analysis is performed on both actors and actresses separately, and we reveal measurable and statistically significant differences between these two groups across different metrics, thereby providing compelling evidence of gender bias in show business.
△ Less
Submitted 5 January, 2019;
originally announced January 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Superconducting Diamond on Silicon Nitride for Device Applications
Authors:
Henry A. Bland,
Evan L. H. Thomas,
Georgina M. Klemencic,
Soumen Mandal,
Andreas Papageorgiou,
Tyrone G. Jones,
Oliver A. Williams
Abstract:
Chemical vapour deposition (CVD) grown nanocrystalline diamond is an attractive material for the fabrication of devices. For some device architectures, optimisation of its growth on silicon nitride is essential. Here, the effects of three pre-growth surface treatments, often employed as cleaning methods of silicon nitride, were investigated. Such treatments provide control over the surface charge…
▽ More
Chemical vapour deposition (CVD) grown nanocrystalline diamond is an attractive material for the fabrication of devices. For some device architectures, optimisation of its growth on silicon nitride is essential. Here, the effects of three pre-growth surface treatments, often employed as cleaning methods of silicon nitride, were investigated. Such treatments provide control over the surface charge of the substrate through modification of the surface functionality, allowing for the optimisation of electrostatic diamond seeding densities. Zeta potential measurements and X-ray photoelectron spectroscopy (XPS) were used to analyse the silicon nitride surface following each treatment. Exposing silicon nitride to an oxygen plasma offered optimal surface conditions for the electrostatic self-assembly of a hydrogen-terminated diamond nanoparticle monolayer. The subsequent growth of boron-doped nanocrystalline diamond thin films on modified silicon nitride substrates under CVD conditions produced coalesced films for oxygen plasma and solvent treatments, whilst pin-holing of the diamond film was observed following RCA-1 treatment. The sharpest superconducting transition was observed for diamond grown on oxygen plasma treated silicon nitride, demonstrating it to be of the least structural disorder. Modifications to the substrate surface optimise the seeding and growth processes for the fabrication of diamond on silicon nitride devices.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
Effects of memory on spreading processes in non-Markovian temporal networks
Authors:
Oliver E. Williams,
Fabrizio Lillo,
Vito Latora
Abstract:
Many biological, social and man-made systems are better described in terms of temporal networks, i.e. networks whose links are only present at certain points in time, rather than by static ones. In particular, it has been found that non-Markovianity is a necessary ingredient to capture the non-trivial temporal patterns of real-world networks. However, our understanding of how memory can affect the…
▽ More
Many biological, social and man-made systems are better described in terms of temporal networks, i.e. networks whose links are only present at certain points in time, rather than by static ones. In particular, it has been found that non-Markovianity is a necessary ingredient to capture the non-trivial temporal patterns of real-world networks. However, our understanding of how memory can affect the properties of dynamical processes taking place over temporal networks is still very limited, being especially constrained to the case of short-term memory. Here, by introducing a model for temporal networks in which we can precisely control the link density and the strength and length of memory for each link, we unveil the role played by memory on the dynamics of epidemic spreading processes. Surprisingly, we find that the average spreading time in our temporal networks is often non-monotonically dependent on the length of the memory, and that the optimal value of the memory length which maximizes the spreading time depends on the strength of the memory and on the density of links in the network. Through analytical arguments we then explore the effect that changing the number and length of network paths connecting any two nodes has on the value of optimal memory.
△ Less
Submitted 9 October, 2018;
originally announced October 2018.
-
Production of Metal-free Diamond Nanoparticles
Authors:
Laia Ginés,
Soumen Mandal,
David John Morgan,
Ryan Lewis,
Phil Davies,
Paola Borri,
Gavin Morley,
Oliver A. Williams
Abstract:
In this paper, the controlled production of high quality metal-free diamond nanoparticles is demonstrated. Milling with tempered steel is shown to leave behind iron oxide contamination which is difficult to remove. Milling with SiN alleviates this issue but generates more non diamond carbon. Thus the choice of milling materials is critically determined by the acceptable contaminants in the ultimat…
▽ More
In this paper, the controlled production of high quality metal-free diamond nanoparticles is demonstrated. Milling with tempered steel is shown to leave behind iron oxide contamination which is difficult to remove. Milling with SiN alleviates this issue but generates more non diamond carbon. Thus the choice of milling materials is critically determined by the acceptable contaminants in the ultimate application. The removal of metal impurities, present in all commercially available nanoparticles, will open new possibilities towards the production of customised diamond nanoparticles, covering the most demanding quantum applications.
△ Less
Submitted 20 August, 2018;
originally announced August 2018.
-
Strongly inhomogeneous distribution of spectral properties of silicon-vacancy color centers in nanodiamonds
Authors:
Sarah Lindner,
Alexander Bommer,
Andreas Muzha,
Anke Krueger,
Laia Gines,
Soumen Mandal,
Oliver Williams,
Elisa Londero,
Adam Gali,
Christoph Becher
Abstract:
The silicon-vacancy (SiV) color center in diamond is a solid-state single photon emitter and spin quantum bit suited as a component in quantum devices. Here, we show that the SiV center in nanodiamond exhibits a strongly inhomogeneous distribution with regard to the center wavelengths and linewidths of the zero-phonon-line (ZPL) emission at room temperature. We find that the SiV centers separate i…
▽ More
The silicon-vacancy (SiV) color center in diamond is a solid-state single photon emitter and spin quantum bit suited as a component in quantum devices. Here, we show that the SiV center in nanodiamond exhibits a strongly inhomogeneous distribution with regard to the center wavelengths and linewidths of the zero-phonon-line (ZPL) emission at room temperature. We find that the SiV centers separate in two clusters: one group exhibits ZPLs with center wavelengths within a narrow range of approximatly 730 nm to 742 nm and broad linewidths between 5 nm and 17 nm, whereas the second group comprises a very broad distribution of center wavelengths between 715 nm and 835 nm, but narrow linewidths from below 1 nm up to 4 nm. Supported by ab initio Kohn-Sham density functional theory calculations we show that the ZPL shifts of the first group are consistently explained by strain in the diamond lattice. Further, we suggest, that the second group showing the strongly inhomogeneous distribution of center wavelengths might be comprised of modified SiV centers. Whereas single photon emission is demonstrated for SiV centers of both clusters, we show that emitters from different clusters show different spectroscopic features such as variations of the phonon sideband spectra and different blinking dynamics.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
A simple, space constrained NIRIM type reactor for chemical vapour deposition of diamond
Authors:
Evan L. H. Thomas,
Laia Gines,
Soumen Mandal,
Georgina M. Klemencic,
Oliver A. Williams
Abstract:
In this paper the design of a simple, space constrained chemical vapour deposition reactor for diamond growth is detailed. Based on the design by NIRIM, the reactor is composed of a quartz discharge tube placed within a 2.45 GHz waveguide to create the conditions required for metastable growth of diamond. Utilising largely off-the-shelf components and a modular design, the reactor allows for easy…
▽ More
In this paper the design of a simple, space constrained chemical vapour deposition reactor for diamond growth is detailed. Based on the design by NIRIM, the reactor is composed of a quartz discharge tube placed within a 2.45 GHz waveguide to create the conditions required for metastable growth of diamond. Utilising largely off-the-shelf components and a modular design, the reactor allows for easy modification, repair, and cleaning between growth runs. The elements of the reactor design are laid out with the CAD files, parts list, and control files made easily available to enable replication. Finally, the quality of nanocrystalline diamond films produced are studied with SEM and Raman spectroscopy, with the observation of clear faceting and a large diamond fraction suggesting the design offers deposition of diamond with minimal complexity.
△ Less
Submitted 26 March, 2018;
originally announced March 2018.
-
Observation of a superconducting glass state in granular superconducting diamond
Authors:
G. M. Klemencic,
J. M. Fellows,
J. M. Werrell,
S. Mandal,
S. R. Giblin,
R. A. Smith,
O. A. Williams
Abstract:
The magnetic field dependence of the superconductivity in nanocrystalline boron doped diamond thin films is reported. Evidence of a glass state in the phase diagram is presented, as demonstrated by electrical resistance and magnetic relaxation measurements. The position of the phase boundary in the H-T plane is determined from resistance data by detailed fitting to zero-dimensional fluctuation con…
▽ More
The magnetic field dependence of the superconductivity in nanocrystalline boron doped diamond thin films is reported. Evidence of a glass state in the phase diagram is presented, as demonstrated by electrical resistance and magnetic relaxation measurements. The position of the phase boundary in the H-T plane is determined from resistance data by detailed fitting to zero-dimensional fluctuation conductivity theory. This allows determination of the boundary between resistive and non-resistive behavior to be made with greater precision than the standard ad hoc onset/midpoint/offset criterion.
△ Less
Submitted 5 March, 2018;
originally announced March 2018.