Showing 1–36 of 36 results for author: Wilkins, J

Two vs. Four-Channel Sound Event Localization and Detection

Authors: Julia Wilkins, Magdalena Fuentes, Luca Bondi, Shabnam Ghaffarzadegan, Ali Abavisani, Juan Pablo Bello

Abstract: Sound event localization and detection (SELD) systems estimate both the direction-of-arrival (DOA) and class of sound sources over time. In the DCASE 2022 SELD Challenge (Task 3), models are designed to operate in a 4-channel setting. While beneficial to further the development of SELD systems using a multichannel recording setup such as first-order Ambisonics (FOA), most consumer electronics devi… ▽ More Sound event localization and detection (SELD) systems estimate both the direction-of-arrival (DOA) and class of sound sources over time. In the DCASE 2022 SELD Challenge (Task 3), models are designed to operate in a 4-channel setting. While beneficial to further the development of SELD systems using a multichannel recording setup such as first-order Ambisonics (FOA), most consumer electronics devices rarely are able to record using more than two channels. For this reason, in this work we investigate the performance of the DCASE 2022 SELD baseline model using three audio input representations: FOA, binaural, and stereo. We perform a novel comparative analysis illustrating the effect of these audio input representations on SELD performance. Crucially, we show that binaural and stereo (i.e. 2-channel) audio-based SELD models are still able to localize and detect sound sources laterally quite well, despite overall performance degrading as less audio information is provided. Further, we segment our analysis by scenes containing varying degrees of sound source polyphony to better understand the effect of audio input representation on localization and detection performance as scene conditions become increasingly complex. △ Less

Submitted 23 September, 2023; originally announced September 2023.

Bridging High-Quality Audio and Video via Language for Sound Effects Retrieval from Visual Queries

Authors: Julia Wilkins, Justin Salamon, Magdalena Fuentes, Juan Pablo Bello, Oriol Nieto

Abstract: Finding the right sound effects (SFX) to match moments in a video is a difficult and time-consuming task, and relies heavily on the quality and completeness of text metadata. Retrieving high-quality (HQ) SFX using a video frame directly as the query is an attractive alternative, removing the reliance on text metadata and providing a low barrier to entry for non-experts. Due to the lack of HQ audio… ▽ More Finding the right sound effects (SFX) to match moments in a video is a difficult and time-consuming task, and relies heavily on the quality and completeness of text metadata. Retrieving high-quality (HQ) SFX using a video frame directly as the query is an attractive alternative, removing the reliance on text metadata and providing a low barrier to entry for non-experts. Due to the lack of HQ audio-visual training data, previous work on audio-visual retrieval relies on YouTube (in-the-wild) videos of varied quality for training, where the audio is often noisy and the video of amateur quality. As such it is unclear whether these systems would generalize to the task of matching HQ audio to production-quality video. To address this, we propose a multimodal framework for recommending HQ SFX given a video frame by (1) leveraging large language models and foundational vision-language models to bridge HQ audio and video to create audio-visual pairs, resulting in a highly scalable automatic audio-visual data curation pipeline; and (2) using pre-trained audio and visual encoders to train a contrastive learning-based retrieval system. We show that our system, trained using our automatic data curation pipeline, significantly outperforms baselines trained on in-the-wild data on the task of HQ SFX retrieval for video. Furthermore, while the baselines fail to generalize to this task, our system generalizes well from clean to in-the-wild data, outperforming the baselines on a dataset of YouTube videos despite only being trained on the HQ audio-visual pairs. A user study confirms that people prefer SFX retrieved by our system over the baseline 67% of the time both for HQ and in-the-wild data. Finally, we present ablations to determine the impact of model and data pipeline design choices on downstream retrieval performance. Please visit our project website to listen to and view our SFX retrieval results. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Comments: WASPAA 2023. Project page: https://juliawilkins.github.io/sound-effects-retrieval-from-video/. 4 pages, 2 figures, 2 tables

Critical Perspectives: A Benchmark Revealing Pitfalls in PerspectiveAPI

Authors: Lorena Piedras, Lucas Rosenblatt, Julia Wilkins

Abstract: Detecting "toxic" language in internet content is a pressing social and technical challenge. In this work, we focus on PERSPECTIVE from Jigsaw, a state-of-the-art tool that promises to score the "toxicity" of text, with a recent model update that claims impressive results (Lees et al., 2022). We seek to challenge certain normative claims about toxic language by proposing a new benchmark, Selected… ▽ More Detecting "toxic" language in internet content is a pressing social and technical challenge. In this work, we focus on PERSPECTIVE from Jigsaw, a state-of-the-art tool that promises to score the "toxicity" of text, with a recent model update that claims impressive results (Lees et al., 2022). We seek to challenge certain normative claims about toxic language by proposing a new benchmark, Selected Adversarial SemanticS, or SASS. We evaluate PERSPECTIVE on SASS, and compare to low-effort alternatives, like zero-shot and few-shot GPT-3 prompt models, in binary classification settings. We find that PERSPECTIVE exhibits troubling shortcomings across a number of our toxicity categories. SASS provides a new tool for evaluating performance on previously undetected toxic language that avoids common normative pitfalls. Our work leads us to emphasize the importance of questioning assumptions made by tools already in deployment for toxicity detection in order to anticipate and prevent disparate harms. △ Less

Submitted 4 January, 2023; originally announced January 2023.

ACM Class: I.2.7

Journal ref: NLP for Positive Impact at EMNLP 2022

Modelling the filtration efficiency of a woven fabric: The role of multiple lengthscales

Authors: Ioatzin Rios de Anda, Jake W. Wilkins, Joshua F. Robinson, C. Patrick Royall, Richard P. Sear

Abstract: During the COVID-19 pandemic, many millions have worn masks made of woven fabric, to reduce the risk of transmission of COVID-19. Masks are essentially air filters worn on the face, that should filter out as many of the dangerous particles as possible. Here the dangerous particles are the droplets containing virus that are exhaled by an infected person. Woven fabric is unlike the material used in… ▽ More During the COVID-19 pandemic, many millions have worn masks made of woven fabric, to reduce the risk of transmission of COVID-19. Masks are essentially air filters worn on the face, that should filter out as many of the dangerous particles as possible. Here the dangerous particles are the droplets containing virus that are exhaled by an infected person. Woven fabric is unlike the material used in standard air filters. Woven fabric consists of fibres twisted together into yarns that are then woven into fabric. There are therefore two lengthscales: the diameters of: (i) the fibre and (ii) the yarn. Standard air filters have only (i). To understand how woven fabrics filter, we have used confocal microscopy to take three dimensional images of woven fabric. We then used the image to perform Lattice Boltzmann simulations of the air flow through fabric. With this flow field we calculated the filtration efficiency for particles a micrometre and larger in diameter. In agreement with experimental measurements by others, we find that for particles in this size range, filtration efficiency is low. For particles with a diameter of 1.5 micrometres our estimated efficiency is in the range 2.5 to 10%. The low efficiency is due to most of the air flow being channelled through relatively large (tens of micrometres across) inter-yarn pores. So we conclude that fabric is expected to filter poorly due to the hierarchical structure of woven fabrics. △ Less

Submitted 17 January, 2022; v1 submitted 6 October, 2021; originally announced October 2021.

Comments: 14 pages, 11 figures

Journal ref: Physics of Fluids 34, 033301 (2022)

Image Processing Failure and Deep Learning Success in Lawn Measurement

Authors: J. Wilkins, M. V. Nguyen, B. Rahmani

Abstract: Lawn area measurement is an application of image processing and deep learning. Researchers have been used hierarchical networks, segmented images and many other methods to measure lawn area. Methods effectiveness and accuracy varies. In this project Image processing and deep learning methods has been compared to find the best way to measure the lawn area. Three Image processing methods using OpenC… ▽ More Lawn area measurement is an application of image processing and deep learning. Researchers have been used hierarchical networks, segmented images and many other methods to measure lawn area. Methods effectiveness and accuracy varies. In this project Image processing and deep learning methods has been compared to find the best way to measure the lawn area. Three Image processing methods using OpenCV has been compared to Convolutional Neural network which is one of the most famous and effective deep learning methods. We used Keras and TensorFlow to estimate the lawn area. Convolutional Neural Network or shortly CNN shows very high accuracy (94-97%) for this purpose. In image processing methods, Thresholding with 80-87% accuracy and Edge detection are effective methods to measure the lawn area but Contouring with 26-31% accuracy does not calculate the lawn area successfully. We may conclude that deep learning methods especially CNN could be the best detective method comparing to image processing and other deep learning techniques. △ Less

Submitted 21 April, 2020; originally announced April 2020.

Ab initio based empirical potential applied to tungsten at high pressure

Authors: Robert C. Ehemann, Jeremy W. Nicklas, Hyoungki Park, John W. Wilkins

Abstract: Density-functional theory forces, stresses and energies comprise a database from which the optimal parameters of a spline-based empirical potential combining Stillinger-Weber and modified embedded-atom forms are determined. Accuracy of the potential is demonstrated by predictions of ideal shear, stacking fault, vacancy migration, elastic constants and phonons all between 0 and 100 GPa. Consistency… ▽ More Density-functional theory forces, stresses and energies comprise a database from which the optimal parameters of a spline-based empirical potential combining Stillinger-Weber and modified embedded-atom forms are determined. Accuracy of the potential is demonstrated by predictions of ideal shear, stacking fault, vacancy migration, elastic constants and phonons all between 0 and 100 GPa. Consistency with existing models and experiments is demonstrated by application to screw dislocation core structure and deformation twinning in a tungsten nanorod. Lastly, the potential is used to study the high-pressure bcc to fcc phase transition. △ Less

Submitted 15 February, 2017; originally announced February 2017.

Journal ref: Phys. Rev. B 95, 184101 (2017)

Strong Federations: An Interoperable Blockchain Solution to Centralized Third-Party Risks

Authors: Johnny Dilley, Andrew Poelstra, Jonathan Wilkins, Marta Piekarska, Ben Gorlick, Mark Friedenbach

Abstract: Bitcoin, the first peer-to-peer electronic cash system, opened the door to permissionless, private, and trustless transactions. Attempts to repurpose Bitcoin's underlying blockchain technology have run up against fundamental limitations to privacy, faithful execution, and transaction finality. We introduce \emph{Strong Federations}: publicly verifiable, Byzantine-robust transaction networks that f… ▽ More Bitcoin, the first peer-to-peer electronic cash system, opened the door to permissionless, private, and trustless transactions. Attempts to repurpose Bitcoin's underlying blockchain technology have run up against fundamental limitations to privacy, faithful execution, and transaction finality. We introduce \emph{Strong Federations}: publicly verifiable, Byzantine-robust transaction networks that facilitate movement of any asset between disparate markets, without requiring third-party trust. \emph{Strong Federations} enable commercial privacy, with support for transactions where asset types and amounts are opaque, while remaining publicly verifiable. As in Bitcoin, execution fidelity is cryptographically enforced; however, \emph{Strong Federations} significantly lower capital requirements for market participants by reducing transaction latency and improving interoperability. To show how this innovative solution can be applied today, we describe \emph{\liquid}: the first implementation of \emph{Strong Federations} deployed in a Financial Market. △ Less

Submitted 30 January, 2017; v1 submitted 16 December, 2016; originally announced December 2016.

On the universal structure of human lexical semantics

Authors: Hye** Youn, Logan Sutton, Eric Smith, Cristopher Moore, Jon F. Wilkins, Ian Maddieson, William Croft, Tanmoy Bhattacharya

Abstract: How universal is human conceptual structure? The way concepts are organized in the human brain may reflect distinct features of cultural, historical, and environmental background in addition to properties universal to human cognition. Semantics, or meaning expressed through language, provides direct access to the underlying conceptual structure, but meaning is notoriously difficult to measure, let… ▽ More How universal is human conceptual structure? The way concepts are organized in the human brain may reflect distinct features of cultural, historical, and environmental background in addition to properties universal to human cognition. Semantics, or meaning expressed through language, provides direct access to the underlying conceptual structure, but meaning is notoriously difficult to measure, let alone parameterize. Here we provide an empirical measure of semantic proximity between concepts using cross-linguistic dictionaries. Across languages carefully selected from a phylogenetically and geographically stratified sample of genera, translations of words reveal cases where a particular language uses a single polysemous word to express concepts represented by distinct words in another. We use the frequency of polysemies linking two concepts as a measure of their semantic proximity, and represent the pattern of such linkages by a weighted network. This network is highly uneven and fragmented: certain concepts are far more prone to polysemy than others, and there emerge naturally interpretable clusters loosely connected to each other. Statistical analysis shows such structural properties are consistent across different language groups, largely independent of geography, environment, and literacy. It is therefore possible to conclude the conceptual structure connecting basic vocabulary studied is primarily due to universal features of human cognition and language use. △ Less

Submitted 29 April, 2015; originally announced April 2015.

Comments: Press embargo in place until publication

Journal ref: PNAS 113 7 1766-1771 (2016)

Comparison of polynomial approximations to speed up planewave-based quantum Monte Carlo calculations

Authors: William D. Parker, C. J. Umrigar, Dario Alfè, Richard G. Hennig, John W. Wilkins

Abstract: The computational cost of quantum Monte Carlo (QMC) calculations of realistic periodic systems depends strongly on the method of storing and evaluating the many-particle wave function. Previous work [A. J. Williamson et al., Phys. Rev. Lett. 87, 246406 (2001); D. Alfè and M. J. Gillan, Phys. Rev. B 70, 161101 (2004)] has demonstrated the reduction of the O(N^3) cost of evaluating the Slater determ… ▽ More The computational cost of quantum Monte Carlo (QMC) calculations of realistic periodic systems depends strongly on the method of storing and evaluating the many-particle wave function. Previous work [A. J. Williamson et al., Phys. Rev. Lett. 87, 246406 (2001); D. Alfè and M. J. Gillan, Phys. Rev. B 70, 161101 (2004)] has demonstrated the reduction of the O(N^3) cost of evaluating the Slater determinant with planewaves to O(N^2) using localized basis functions. We compare four polynomial approximations as basis functions -- interpolating Lagrange polynomials, interpolating piecewise-polynomial-form (pp-) splines, and basis-form (B-) splines (interpolating and smoothing). All these basis functions provide a similar speedup relative to the planewave basis. The pp-splines have eight times the memory requirement of the other methods. To test the accuracy of the basis functions, we apply them to the ground state structures of Si, Al, and MgO. The polynomial approximations differ in accuracy most strongly for MgO and smoothing B-splines most closely reproduce the planewave value for of the variational Monte Carlo energy. Using separate approximations for the Laplacian of the orbitals increases the accuracy sufficiently to justify the increased memory requirement, making smoothing B-splines, with separate approximation for the Laplacian, the preferred choice for approximating planewave-represented orbitals in QMC calculations. △ Less

Submitted 30 October, 2014; v1 submitted 24 September, 2013; originally announced September 2013.

Essential Circles and Gromov-Hausdorff Convergence of Covers

Authors: Conrad Plaut, Jay Wilkins

Abstract: We give various applications of essential circles (introduced in an earlier paper by the authors) in a compact geodesic space X. Essential circles completely determine the homotopy critical spectrum of X, which we show is precisely 2/3 the covering spectrum of Sormani-Wei. We use finite collections of essential circles to define "circle covers," which extend and contain as special cases the delta-… ▽ More We give various applications of essential circles (introduced in an earlier paper by the authors) in a compact geodesic space X. Essential circles completely determine the homotopy critical spectrum of X, which we show is precisely 2/3 the covering spectrum of Sormani-Wei. We use finite collections of essential circles to define "circle covers," which extend and contain as special cases the delta-covers of Sormani and Wei (equivalently the epsilon-covers of the authors); the constructions are metric adaptations of those utilized by Berestovskii-Plaut in the construction of entourage covers of uniform spaces. We show that, unlike delta- and epsilon-covers, circle covers are in a sense closed with respect to Gromov-Hausdorff convergence, and we prove a finiteness theorem concerning their deck groups that does not hold for covering maps in general. This allows us to completely understand the structure of Gromov-Hausdorff limits of delta-covers. Also, we use essential circles to strengthen a theorem of E. Cartan by finding a new (even for compact Riemannian manifolds) finite set of generators of the fundamental group of a semilocally simply connected compact geodesic space. We conjecture that there is always a generating set of this sort having minimal cardinality among all generating sets. △ Less

Submitted 21 January, 2014; v1 submitted 2 April, 2013; originally announced April 2013.

Comments: 26 pages

The Revised and Uniform Fundamental Groups and Universal Covers of Geodesic Spaces

Authors: Jay Wilkins

Abstract: Sormani and Wei proved in 2004 that a compact geodesic space has a categorical universal cover if and only if its covering/critical spectrum is finite. We add to this several equivalent conditions pertaining to the geometry and topology of the revised and uniform fundamental groups. We show that a compact geodesic space X has a universal cover if and only if the following hold: 1) its revised and… ▽ More Sormani and Wei proved in 2004 that a compact geodesic space has a categorical universal cover if and only if its covering/critical spectrum is finite. We add to this several equivalent conditions pertaining to the geometry and topology of the revised and uniform fundamental groups. We show that a compact geodesic space X has a universal cover if and only if the following hold: 1) its revised and uniform fundamental groups are finitely presented, or, more generally, countable; 2) its revised fundamental group is discrete as a quotient of the topological fundamental group. In the process, we classify the topological singularities in X, and we show that the above conditions imply closed liftings of all sufficiently small path loops to all covers of X, generalizing the traditional semilocally simply connected property. A geodesic space with this new property is called semilocally r-simply connected, and X has a universal cover if and only if it satisfies this condition. We then introduce a topology on the fundamental group called the covering topology, with respect to which the fundamental group is always a topological group. We establish several connections between properties of the covering topology, the existence of simply connected and universal covers, and geometries on the fundamental group. △ Less

Submitted 16 August, 2012; originally announced August 2012.

Comments: 28 pages

MSC Class: 54E45 (Primary) 57M10; 54H11; 20F38 (Secondary)

Journal ref: Topology and its Applications 160 (2013), no. 6, 812 - 835

Magnetic states and optical properties of single-layer carbon-doped hexagonal boron nitride

Authors: Hyoungki Park, Amita Wadehra, John W. Wilkins, Antonio H. Castro Neto

Abstract: We show that carbon-doped hexagonal boron nitride (h-BN) has extraordinary properties with many possible applications. We demonstrate that the substitution-induced impurity states, associated with carbon atoms, and their interactions dictate the electronic structure and properties of C-doped h-BN. Furthermore, we show that stacking of localized impurity states in small C clusters embedded in h-BN… ▽ More We show that carbon-doped hexagonal boron nitride (h-BN) has extraordinary properties with many possible applications. We demonstrate that the substitution-induced impurity states, associated with carbon atoms, and their interactions dictate the electronic structure and properties of C-doped h-BN. Furthermore, we show that stacking of localized impurity states in small C clusters embedded in h-BN forms a set of discrete energy levels in the wide gap of h-BN. The electronic structures of these C clusters have a plethora of applications in optics, magneto-optics, and opto-electronics. △ Less

Submitted 15 May, 2012; originally announced May 2012.

Discrete Homotopy Theory and Critical Values of Metric Spaces

Authors: Jim Conant, Victoria Curnutte, Corey Jones, Conrad Plaut, Kristen Pueschel, Maria Walpole, Jay Wilkins

Abstract: Utilizing the discrete homotopy methods developed for uniform spaces by Berestovskii-Plaut, we define the critical spectrum Cr(X) of a metric space, generalizing to the non-geodesic case the covering spectrum defined by Sormani-Wei and the homotopy critical spectrum defined by Plaut-Wilkins. If X is geodesic, Cr(X) is the same as the homotopy critical spectrum, which differs from the covering spec… ▽ More Utilizing the discrete homotopy methods developed for uniform spaces by Berestovskii-Plaut, we define the critical spectrum Cr(X) of a metric space, generalizing to the non-geodesic case the covering spectrum defined by Sormani-Wei and the homotopy critical spectrum defined by Plaut-Wilkins. If X is geodesic, Cr(X) is the same as the homotopy critical spectrum, which differs from the covering spectrum by a factor of 3/2. The latter two spectra are known to be discrete for compact geodesic spaces, and correspond to the values at which certain special covering maps, called delta-covers (Sormani-Wei) or epsilon-covers (Plaut-Wilkins), change equivalence type. In this paper we initiate the study of these ideas for non-geodesic spaces, motivated by the need to understand the extent to which the accompanying covering maps are topological invariants. We show that discreteness of the critical spectrum for general metric spaces can fail in several ways, which we classify. The "newcomer" critical values for compact, non-geodesic spaces are completely determined by the homotopy critical values and refinement critical values, the latter of which can, in many cases, be removed by changing the metric in a bi-Lipschitz way. △ Less

Submitted 13 September, 2013; v1 submitted 13 May, 2012; originally announced May 2012.

Comments: 5 figures, 23 pages. This third version includes updated references, additions to the introduction that further motivate the investigation of the critical spectrum for non-geodesic spaces, and an answer to a question posed by the authors in the first version regarding the topological relevance of refinement critical values

MSC Class: 54E45 (Primary); 54G20; 53C23 (Secondary)

Discrete homotopies and the fundamental group

Authors: Conrad Plaut, Jay Wilkins

Abstract: We generalize and strengthen the theorem of Gromov that every compact Riemannian manifold of diameter at most D has a set of generators g_1,...,g_k of length at most 2D and relators of the form g_ig_m = g_j . In particular, we obtain an explicit bound for the number k of generators in terms of the number "short loops" at every point and the number of balls required to cover a given semilocally sim… ▽ More We generalize and strengthen the theorem of Gromov that every compact Riemannian manifold of diameter at most D has a set of generators g_1,...,g_k of length at most 2D and relators of the form g_ig_m = g_j . In particular, we obtain an explicit bound for the number k of generators in terms of the number "short loops" at every point and the number of balls required to cover a given semilocally simply connected geodesic space. As a consequence we obtain a fundamental group finiteness theorem (new even for Riemannian manifolds) that implies the fundamental group finiteness theorems of Anderson and Shen-Wei. Our theorem requires no curvature bounds, nor lower bounds on volume or 1-systole. We use the method of discrete homotopies introduced by the first author and V. N. Berestovskii. Central to the proof is the notion of the homotopy critical spectrum that is closely related to the covering and length spectra. Discrete methods also allow us to strengthen and simplify the proofs of some results of Sormani-Wei about the covering spectrum. △ Less

Submitted 5 May, 2012; originally announced May 2012.

MSC Class: 53C23

Journal ref: Adv. Math. 232 (2013), 271 - 294

Phase Space Wannier Functions in Electronic Structure Calculations

Authors: D. J. Sullivan, J. J. Rehr, J. W. Wilkins, K. G. Wilson

Abstract: We consider the applicability of phase space Wannier functions" to electronic structure calculations. These generalized Wannier functions are analogous to localized plane waves and constitute a complete, orthonormal set which is exponentially localized both in position and momentum space. Their properties are described and an illustrative application to bound states in one dimension is presented.… ▽ More We consider the applicability of phase space Wannier functions" to electronic structure calculations. These generalized Wannier functions are analogous to localized plane waves and constitute a complete, orthonormal set which is exponentially localized both in position and momentum space. Their properties are described and an illustrative application to bound states in one dimension is presented. Criteria for choosing basis set size and lattice constant are discussed based on semi-classical, phase space considerations. Convergence of the ground state energy with respect to basis size is evaluated. Comparison with plane-waves basis sets indicates that the number of phase space Wannier functions needed for convergence can be signicantly smaller in three dimensions. PACS: 71.10.+x, 71.50.+t △ Less

Submitted 20 July, 2010; originally announced July 2010.

Comments: Ohio State U. Preprint, November 1989

Band offsets of semiconductor heterostructures: a hybrid density functional study

Authors: Amita Wadehra, Jeremy W. Nicklas, John W. Wilkins

Abstract: We demonstrate the accuracy of the hybrid functional HSE06 for computing band offsets of semiconductor alloy heterostructures. The highlight of this study is the computation of conduction band offsets with a reliability that has eluded standard density functional theory. A high-quality special quasirandom structure models an infinite random pseudobinary alloy for constructing heterostructures alon… ▽ More We demonstrate the accuracy of the hybrid functional HSE06 for computing band offsets of semiconductor alloy heterostructures. The highlight of this study is the computation of conduction band offsets with a reliability that has eluded standard density functional theory. A high-quality special quasirandom structure models an infinite random pseudobinary alloy for constructing heterostructures along the (001) growth direction. Our excellent results for a variety of heterostructures establish HSE06's relevance to band engineering of high-performance electrical and optoelectronic devices. △ Less

Submitted 15 July, 2010; originally announced July 2010.

Comments: 3 pages, 2 figures

Accuracy of Quantum Monte Carlo Methods for Point Defects in Solids

Authors: William D. Parker, John W. Wilkins, Richard G. Hennig

Abstract: Quantum Monte Carlo approaches such as the diffusion Monte Carlo (DMC) method are among the most accurate many-body methods for extended systems. Their scaling makes them well suited for defect calculations in solids. We review the various approximations needed for DMC calculations of solids and the results of previous DMC calculations for point defects in solids. Finally, we present estimates of… ▽ More Quantum Monte Carlo approaches such as the diffusion Monte Carlo (DMC) method are among the most accurate many-body methods for extended systems. Their scaling makes them well suited for defect calculations in solids. We review the various approximations needed for DMC calculations of solids and the results of previous DMC calculations for point defects in solids. Finally, we present estimates of how approximations affect the accuracy of calculations for self-interstitial formation energies in silicon and predict DMC values of 4.4(1), 5.1(1) and 4.7(1) eV for the X, T and H interstitial defects, respectively, in a 16(+1)-atom supercell. △ Less

Submitted 16 June, 2010; originally announced June 2010.

Journal ref: Phys. Status Solidi B 248, 267 (2011)

Phase transformation in Si from semiconducting diamond to metallic beta-Sn phase in QMC and DFT under hydrostatic and anisotropic stress

Authors: R. G. Hennig, A. Wadehra, K. P. Driver, W. D. Parker, C. J. Umrigar, J. W. Wilkins

Abstract: Silicon undergoes a phase transition from the semiconducting diamond phase to the metallic beta-Sn phase under pressure. We use quantum Monte Carlo calculations to predict the transformation pressure and compare the results to density functional calculations employing the LDA, PBE, PW91, WC, AM05, PBEsol and HSE06 exchange-correlation functionals. Diffusion Monte Carlo predicts a transition pressu… ▽ More Silicon undergoes a phase transition from the semiconducting diamond phase to the metallic beta-Sn phase under pressure. We use quantum Monte Carlo calculations to predict the transformation pressure and compare the results to density functional calculations employing the LDA, PBE, PW91, WC, AM05, PBEsol and HSE06 exchange-correlation functionals. Diffusion Monte Carlo predicts a transition pressure of 14.0 +- 1.0 GPa slightly above the experimentally observed transition pressure range of 11.3 to 12.6 GPa. The HSE06 hybrid functional predicts a transition pressure of 12.4 GPa in excellent agreement with experiments. Exchange-correlation functionals using the local-density approximation and generalized-gradient approximations result in transition pressures ranging from 3.5 to 10.0 GPa, well below the experimental values. The transition pressure is sensitive to stress anisotropy. Anisotropy in the stress along any of the cubic axes of the diamond phase of silicon lowers the equilibrium transition pressure and may explain the discrepancy between the various experimental values as well as the small overestimate of the quantum Monte Carlo transition pressure. △ Less

Submitted 16 June, 2010; originally announced June 2010.

Journal ref: Phys. Rev. B 82, 014101 (2010)

Accurate Ab-initio Predictions of III-V Direct-Indirect Band Gap Crossovers

Authors: Jeremy W. Nicklas, John W. Wilkins

Abstract: We report the compositional dependence of the electronic band structure for a range of III-V alloys. Density functional theory with the PBE functional is insufficient to mimic the electronic gap energies at different symmetry points of the Brillouin zone. The HSE hybrid functional with screened exchange accurately reproduces the experimental band gaps and, more importantly, the alloy concentration… ▽ More We report the compositional dependence of the electronic band structure for a range of III-V alloys. Density functional theory with the PBE functional is insufficient to mimic the electronic gap energies at different symmetry points of the Brillouin zone. The HSE hybrid functional with screened exchange accurately reproduces the experimental band gaps and, more importantly, the alloy concentration of the direct-indirect gap crossovers for the III-V alloys studied here: AlGaAs, InAlAs, AlInP, InGaP, and GaAsP. △ Less

Submitted 18 May, 2010; originally announced May 2010.

Comments: 3 pages, 2 figures

Force-matched embedded-atom method potential for niobium

Authors: Michael R. Fellinger, Hyoungki Park, John W. Wilkins

Abstract: Large-scale simulations of plastic deformation and phase transformations in alloys require reliable classical interatomic potentials. We construct an embedded-atom method potential for niobium as the first step in alloy potential development. Optimization of the potential parameters to a well-converged set of density-functional theory (DFT) forces, energies, and stresses produces a reliable and tr… ▽ More Large-scale simulations of plastic deformation and phase transformations in alloys require reliable classical interatomic potentials. We construct an embedded-atom method potential for niobium as the first step in alloy potential development. Optimization of the potential parameters to a well-converged set of density-functional theory (DFT) forces, energies, and stresses produces a reliable and transferable potential for molecular dynamics simulations. The potential accurately describes properties related to the fitting data, and also produces excellent results for quantities outside the fitting range. Structural and elastic properties, defect energetics, and thermal behavior compare well with DFT results and experimental data, e.g., DFT surface energies are reproduced with less than 4% error, generalized stacking-fault energies differ from DFT values by less than 15%, and the melting temperature is within 2% of the experimental value. △ Less

Submitted 23 April, 2010; v1 submitted 10 March, 2010; originally announced March 2010.

Comments: 17 pages, 13 figures, 7 tables

Journal ref: M. R. Fellinger, H. Park, and J. W. Wilkins, Phys. Rev. B 81, 144119 (2010)

Quantum Monte Carlo for minerals at high pressure: Phase stability, equations of state, and elasticity of silica

Authors: K. P. Driver, R. E. Cohen, Zhigang Wu, B. Militzer, P. López Ríos, M. D. Towler, R. J. Needs, J. W. Wilkins

Abstract: Silica is an abundant component of the Earth whose crystalline polymorphs play key roles in its structure and dynamics. As the simplest silicates, understanding pure silica is a prerequisite to understanding the rocky part of the Earth, its majority. First principle density functional theory (DFT) methods have often been used to accurately predict properties of silicates. Here, we study silica w… ▽ More Silica is an abundant component of the Earth whose crystalline polymorphs play key roles in its structure and dynamics. As the simplest silicates, understanding pure silica is a prerequisite to understanding the rocky part of the Earth, its majority. First principle density functional theory (DFT) methods have often been used to accurately predict properties of silicates. Here, we study silica with quantum Monte Carlo (QMC), which until now was not computationally possible for such complex materials, and find that QMC overcomes the failures of DFT. QMC is a benchmark method that does not rely on density functionals, but rather explicitly treats the electrons and their interactions via a stochastic solution of Schrodinger's equation. Using ground state QMC plus phonons within the quasiharmonic approximation from density functional perturbation theory, we obtain the thermal pressure and equations of state of silica phases up to Earth's core-mantle boundary. Our results provide the most well-constrained equations of state and phase boundaries available for silica. QMC indicates a transition to the most dense alpha-PbO2 structure above the core-insulating D" layer, suggesting the absence of significant free silica in the bulk lower mantle, which has been assumed but never proven. We also find an accurate shear elastic constant and its geophysically important softening with pressure. △ Less

Submitted 12 January, 2010; originally announced January 2010.

Comments: 20 pages, 4 figures, 1 table

Journal ref: PNAS 107, 9519, (2010)

Classical potential describes martensitic phase transformations between the $α$, $β$ and $ω$ titanium phases

Authors: R. G. Hennig, T. J. Lenosky, D. R. Trinkle, S. P. Rudin, J. W. Wilkins

Abstract: A description of the martensitic transformations between the $α$, $β$ and $ω$ phases of titanium that includes nucleation and growth requires an accurate classical potential. Optimization of the parameters of a modified embedded atom potential to a database of density-functional calculations yields an accurate and transferable potential as verified by comparison to experimental and density funct… ▽ More A description of the martensitic transformations between the $α$, $β$ and $ω$ phases of titanium that includes nucleation and growth requires an accurate classical potential. Optimization of the parameters of a modified embedded atom potential to a database of density-functional calculations yields an accurate and transferable potential as verified by comparison to experimental and density functional data for phonons, surface and stacking fault energies and energy barriers for homogeneous martensitic transformations. Molecular dynamics simulations map out the pressure-temperature phase diagram of titanium. For this potential the martensitic phase transformation between $α$ and $β$ appears at ambient pressure and 1200 K, between $α$ and $ω$ at ambient conditions, between $β$ and $ω$ at 1200 K and pressures above 8 GPa, and the triple point occurs at 8GPa and 1200 K. Molecular dynamics explorations of the dynamics of the martensitic $α-ω$ transformation show a fast-moving interface with a low interfacial energy of 30 meV/Å$^2$. The potential is applicable to the study of defects and phase transformations of Ti. △ Less

Submitted 12 June, 2007; originally announced June 2007.

Comments: 10 pages, 6 figures

Effects of morphology on phonons of nanoscopic silver grains

Authors: Gustavo A. Narvaez, Jeongnim Kim, John W. Wilkins

Abstract: The morphology of nanoscopic Ag grains significantly affects the phonons. Atomistic simulations show that realistic nanograin models display complex vibrational properties. (1) Single-crystalline grains. Nearly-pure torsional and radial phonons appear at low frequencies. For low-energy, faceted models, the breathing mode and acoustic gap (lowest frequency) are about 10% lower than predicted by e… ▽ More The morphology of nanoscopic Ag grains significantly affects the phonons. Atomistic simulations show that realistic nanograin models display complex vibrational properties. (1) Single-crystalline grains. Nearly-pure torsional and radial phonons appear at low frequencies. For low-energy, faceted models, the breathing mode and acoustic gap (lowest frequency) are about 10% lower than predicted by elasticity theory (ET) for a continuum sphere of the same volume. The sharp edges and the atomic lattice split the ET-acoustic-gap quintet into a doublet and triplet. The surface protrusions associated with nearly spherical, high-energy models produce a smaller acoustic gap and a higher vibrational density of states (DOS) at frequencies ν<2 THz. (2) Twined icosahedra. In contrast to the single-crystal case, the inherent strain produce a larger acoustic gap, while the core atoms yield a DOS tail extending beyond the highest frequency of single-crystalline grains. (3) Mark's decahedra, in contrast to (1) and (2), do not have a breathing mode; although twined and strained, do not exhibit a high-frequency tail in the DOS. (4) Irregular nanograins. Grain boundaries and surface disorder yield non-degenerate phonon frequencies, and significantly smaller acoustic gap. Only these nanograins exhibit a low-frequency ν^2 DOS in the interval 1-2 THz. △ Less

Submitted 15 October, 2005; v1 submitted 13 June, 2005; originally announced June 2005.

Comments: Version published in Phys. Rev. B

Journal ref: Phys. Rev. B 72, 155411 (2005)

Fast Diffusion Mechanism of Silicon Tri-interstitial Defects

Authors: Yaojun A. Du, Stephen A. Barr, Kaden R. A. Hazzard, Thomas J. Lenosky, Richard G. Hennig, John W. Wilkins

Abstract: We reveal the microscopic self-diffusion process of compact tri-interstitials in silicon using a combination of molecular dynamics and nudged elastic band methods. We find that the compact tri-interstitial moves by a collective displacement, involving both translation and rotation, of five atoms in a screw-like motion along $[111]$ directions. The elucidation of this pathway demonstrates the uti… ▽ More We reveal the microscopic self-diffusion process of compact tri-interstitials in silicon using a combination of molecular dynamics and nudged elastic band methods. We find that the compact tri-interstitial moves by a collective displacement, involving both translation and rotation, of five atoms in a screw-like motion along $[111]$ directions. The elucidation of this pathway demonstrates the utility of combining tight-binding molecular dynamics with \textit{ab initio} density functional calculations to probe diffusion mechanisms. Using density functional theory to obtain diffusion barriers and the prefactor, we calculate a diffusion constant of $ 4 \cdot 10^{-5} \exp (- 0.49 {\rm eV} / k_{B} T) {\rm cm^2/s} $. Because of the low diffusion barrier, $I_{3}^{b}$ diffusion may be an important process under conditions such as ion implantation that creates excess interstitials, hence favoring formation of interstitial clusters. △ Less

Submitted 18 June, 2005; v1 submitted 18 March, 2005; originally announced March 2005.

An Empirical Tight-Binding Model for Titanium Phase Transformations

Authors: D. R. Trinkle, M. D. Jones, R. G. Hennig, S. P. Rudin, R. C. Albers, J. W. Wilkins

Abstract: For a previously published study of the titanium hcp (alpha) to omega (omega) transformation, a tight-binding model was developed for titanium that accurately reproduces the structural energies and electron eigenvalues from all-electron density-functional calculations. We use a fitting method that matches the correctly symmetrized wavefuctions of the tight-binding model to those of the density-f… ▽ More For a previously published study of the titanium hcp (alpha) to omega (omega) transformation, a tight-binding model was developed for titanium that accurately reproduces the structural energies and electron eigenvalues from all-electron density-functional calculations. We use a fitting method that matches the correctly symmetrized wavefuctions of the tight-binding model to those of the density-functional calculations at high symmetry points. The structural energies, elastic constants, phonon spectra, and point-defect energies predicted by our tight-binding model agree with density-functional calculations and experiment. In addition, a modification to the functional form is implemented to overcome the "collapse problem" of tight-binding, necessary for phase transformation studies and molecular dynamics simulations. The accuracy, transferability and efficiency of the model makes it particularly well suited to understanding structural transformations in titanium. △ Less

Submitted 26 February, 2005; originally announced February 2005.

Comments: 9 pages, 8 figures, 5 tables

Journal ref: Phys. Rev. B 73, 094123 (2006)

Impurities block the alpha to omega martensitic transformation in titanium

Authors: R. G. Hennig, D. R. Trinkle, J. Bouchet, S. G. Srinivasan, R. C. Albers, J. W. Wilkins

Abstract: The onset and kinetics of martensitic transformations are controlled by impurities trapped during the transformation. For the alpha to omega transformation in Ti, ab initio methods yield the changes in both the relative stability of and energy barrier between the phases. Using the recently discovered transformation pathway, we study interstitial O, N, C; substitutional Al and V; and Ti interstit… ▽ More The onset and kinetics of martensitic transformations are controlled by impurities trapped during the transformation. For the alpha to omega transformation in Ti, ab initio methods yield the changes in both the relative stability of and energy barrier between the phases. Using the recently discovered transformation pathway, we study interstitial O, N, C; substitutional Al and V; and Ti interstitials and vacancies. The resulting microscopic picture explains the observations, specifically the suppression of the transformation in A-70 and Ti-6Al-4V titanium alloys. △ Less

Submitted 5 September, 2003; originally announced September 2003.

Comments: 4 pages, 2 figures, 2 tables

Journal ref: Nature Materials 4, 129 (2005)

A New Mechanism for the Alpha to Omega Martensitic Transformation in Pure Titanium

Authors: D. R. Trinkle, R. G. Hennig, S. G. Srinivasan, D. M. Hatch, M. D. Jones, H. T. Stokes, R. C. Albers, J. W. Wilkins

Abstract: We propose a new direct mechanism for the pressure driven alpha to omega martensitic transformation in pure titanium. A systematic algorithm enumerates all possible mechanisms whose energy barriers are evaluated. A new, homogeneous mechanism emerges with a barrier at least four times lower than other mechanisms. This mechanism remains favorable in a simple nucleation model. We propose a new direct mechanism for the pressure driven alpha to omega martensitic transformation in pure titanium. A systematic algorithm enumerates all possible mechanisms whose energy barriers are evaluated. A new, homogeneous mechanism emerges with a barrier at least four times lower than other mechanisms. This mechanism remains favorable in a simple nucleation model. △ Less

Submitted 7 January, 2003; originally announced January 2003.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 91, 025701 (2003)

Electron-hole correlations in semiconductor quantum dots with tight-binding wave functions

Authors: Seungwon Lee, Lars Jonsson, John W. Wilkins, Garnett W. Bryant, Gerhard Klimeck

Abstract: The electron-hole states of semiconductor quantum dots are investigated within the framework of empirical tight-binding descriptions for Si, as an example of an indirect gap material, and InAs and CdSe as examples of typical III-V and II-VI direct-gap materials. The electron-hole Coulomb interaction is largely insensitive to both the real-space description of the atomic basis orbitals and differ… ▽ More The electron-hole states of semiconductor quantum dots are investigated within the framework of empirical tight-binding descriptions for Si, as an example of an indirect gap material, and InAs and CdSe as examples of typical III-V and II-VI direct-gap materials. The electron-hole Coulomb interaction is largely insensitive to both the real-space description of the atomic basis orbitals and different ways of optimizing the tight-binding parameters. Tight-binding parameters that are optimized to give the best effective masses significantly improve the energies of the excitonic states due to the better single-particle energies. However, the Coulomb interaction does not vary much between different parameterizations. In addition, the sensitivity of the Coulomb interaction to the choice of atomic or bitals decreases with increasing dot size. Quantitatively, tight-binding treatments of correlation effects are reliable for dots with radii larger than 15--20 angstrom. The calculated excitonic gaps are in good agreement with recent photoluminescence data for Si and CdSe but agree less well for InAs. Further, the effective range of the electron-hole exchange interaction is investigated in detail. In quantum dots of the direct-gap materials InAs and CdSe, the exchange interaction can be long-ranged, extending over the whole dot when there is no local (onsite) orthogonality between the electron and hole wave functions. By contrast, for Si quantum dots the extra phase factor due to the indirect gap effectively limits the range to about 15 angstrom, independent of the dot size. △ Less

Submitted 14 November, 2000; originally announced November 2000.

Comments: 13 pages, 8 figures

Thermally activated reorientation of di-interstitial defects in silicon

Authors: J. Kim, F. Kirchhoff, W. G. Aulbur, J. W. Wilkins, F. S. Khan, G. Kresse

Abstract: We propose a di-interstitial model for the P6 center commonly observed in ion implanted silicon. The di-interstitial structure and transition paths between different defect orientations can explain the thermally activated transition of the P6 center from low-temperature C1h to room-temperature D2d symmetry. The activation energy for the defect reorientation determined by ab initio calculations i… ▽ More We propose a di-interstitial model for the P6 center commonly observed in ion implanted silicon. The di-interstitial structure and transition paths between different defect orientations can explain the thermally activated transition of the P6 center from low-temperature C1h to room-temperature D2d symmetry. The activation energy for the defect reorientation determined by ab initio calculations is 0.5 eV in agreement with the experiment. Our di-interstitial model establishes a link between point defects and extended defects, di-interstitials providing the nuclei for the growth. △ Less

Submitted 1 April, 1999; originally announced April 1999.

Comments: 12 pages, REVTeX, Four figures, submitted to Phys. Rev. Lett

Extended Si defects

Authors: Jeongnim Kim, John W. Wilkins, Furrukh S. Khan, Andrew Canning

Abstract: We perform total energy calculations based on the tight-binding Hamiltonian scheme (i) to study the structural properties and energetics of the extended {311} defects depending upon their dimensions and interstitial concentrations and (ii) to find possible mechanisms of interstitial capture by and release from the {311} defects. The generalized orbital-based linear-scaling method implemented on… ▽ More We perform total energy calculations based on the tight-binding Hamiltonian scheme (i) to study the structural properties and energetics of the extended {311} defects depending upon their dimensions and interstitial concentrations and (ii) to find possible mechanisms of interstitial capture by and release from the {311} defects. The generalized orbital-based linear-scaling method implemented on Cray-T3D is used for supercell calculations of large scale systems containing more than 1000 Si atoms. △ Less

Submitted 19 November, 1996; originally announced November 1996.

Comments: 31 pages, LaTeX file, and 8 figures in postscript files, submitted to PRB

Optical conductivity associated with solitons in the Peierls state as modified by zero-point-motion disorder

Authors: Kihong Kim, John W. Wilkins

Abstract: We extend previous work to consider the effect of the soliton on the density of states and conductivity of quasi-one-dimensional Peierls systems with quantum lattice fluctuations, modeled by a random static disorder. Two features have been verified over an order of magnitude variation in the disorder. (1) The soliton density of states and the leading edges of both the soliton-to-band and the ban… ▽ More We extend previous work to consider the effect of the soliton on the density of states and conductivity of quasi-one-dimensional Peierls systems with quantum lattice fluctuations, modeled by a random static disorder. Two features have been verified over an order of magnitude variation in the disorder. (1) The soliton density of states and the leading edges of both the soliton-to-band and the band-to-band conductivities have universal scaling forms. (2) The soliton-to-band conductivity has the remarkable feature that the leading edge is accurately predicted by the joint density of states while the trailing edge tracks the rigid-lattice conductivity. Or, in other words, disorder dominates the leading edge, while matrix element effects are predominant for the trailing edge. △ Less

Submitted 4 March, 1996; originally announced March 1996.

Prediction of an undimerized, insulating, antiferromagnetic ground-state in halogen-bridged linear-chain Ni compounds

Authors: V. I. Anisimov, R. C. Albers, J. M. Wills, M. Alouani, J. W. Wilkins

Abstract: A parameter-free, mean-field, multi-orbital Hubbard model with nonspherical Coulomb and exchange interactions, implemented around all-electron local-density approximation (LDA) calculations, correctly predicts the band-gap energy, the absence of dimerization, and the antiferromagnetic ground state of halogen-bridged linear-chain Ni compounds. This approach also reproduces the insulating ground s… ▽ More A parameter-free, mean-field, multi-orbital Hubbard model with nonspherical Coulomb and exchange interactions, implemented around all-electron local-density approximation (LDA) calculations, correctly predicts the band-gap energy, the absence of dimerization, and the antiferromagnetic ground state of halogen-bridged linear-chain Ni compounds. This approach also reproduces the insulating ground state and dimerization in PtX linear-chain compounds in agreement with experiment and previous calculations. Three "ps" figures are included at the end of the RevTex file and compressed using uufiles. △ Less

Submitted 24 July, 1995; originally announced July 1995.

Comments: 11 RevTex pages and three ps figures. Paper accepted by PRB Rapid Comm

Alouani {\it et al.} Reply to Comment on Tuning of the CDW in MX Chains

Authors: M. Alouani, J. W. Wilkins, R. C. Albers, J. M. Wills

Abstract: This is a reply to J. T. Gammel's Comment (9404047) on Tuning of the CDW in MX Chains. We show that while the harmonic elastic energy can fit a small region around zero dimerization, it is insufficient to treat the large amplitude CDW of the MX systems which was the main physics of our Letter (Phys. Rev. Lett. {\bf 71}, 1415 (1993)). We also stress that \underline{anharmonic} elastic potentials… ▽ More This is a reply to J. T. Gammel's Comment (9404047) on Tuning of the CDW in MX Chains. We show that while the harmonic elastic energy can fit a small region around zero dimerization, it is insufficient to treat the large amplitude CDW of the MX systems which was the main physics of our Letter (Phys. Rev. Lett. {\bf 71}, 1415 (1993)). We also stress that \underline{anharmonic} elastic potentials are {\it essential} to explain the charge-density-wave systematics of an entire class of MX material. △ Less

Submitted 10 August, 1994; originally announced August 1994.

Comments: RevTex + 2 uuencoded postscript figures

Universal subgap optical conductivity in quasi-one-dimensional Peierls systems

Authors: Kihong Kim, Ross H. McKenzie, John W. Wilkins

Abstract: Quasi-one-dimensional Peierls systems with quantum and thermal lattice fluctuations can be modeled by a Dirac-type equation with a Gaussian-correlated off-diagonal disorder. A powerful new method gives the exact disorder-averaged Green function used to compute the optical conductivity. The strong subgap tail of the conductivity has a universal scaling form. The frequency and temperature dependen… ▽ More Quasi-one-dimensional Peierls systems with quantum and thermal lattice fluctuations can be modeled by a Dirac-type equation with a Gaussian-correlated off-diagonal disorder. A powerful new method gives the exact disorder-averaged Green function used to compute the optical conductivity. The strong subgap tail of the conductivity has a universal scaling form. The frequency and temperature dependence of the calculated spectrum agrees with experiments on KCP(Br) and trans-polyacetylene. △ Less

Submitted 11 November, 1993; originally announced November 1993.

Comments: 11 pages (+ 3 figures), LATEX (REVTEX 3.0)

Tuning of the CDW in the Halogen-Bridged Transition-Metal Linear-Chain Compounds

Authors: M. Alouani, J. W. Wilkins, R. C. Albers, J. M. Wills

Abstract: Local-density-approximation calculations are used to show that the metal-metal distance along the chains controls the charge-density wave (CDW) in halogen-bridged transition-metal linear-chain (MX) compounds. The strength of the CDW can be understood in terms of a two band Su-Schrieffer-Heeger model if a hard-core ion-ion repulsion potential is also added. We predict a second-order phase transit… ▽ More Local-density-approximation calculations are used to show that the metal-metal distance along the chains controls the charge-density wave (CDW) in halogen-bridged transition-metal linear-chain (MX) compounds. The strength of the CDW can be understood in terms of a two band Su-Schrieffer-Heeger model if a hard-core ion-ion repulsion potential is also added. We predict a second-order phase transition from an insulating to a semi-metallic ground state and explain trends in dimerization, bond-length ratios, band gaps, and Raman breathing modes in terms of the metal-metal distance. Three "ps" figures are included at the end of the file. △ Less

Submitted 18 August, 1993; originally announced August 1993.

Comments: 13 pages

Zero Frequency Current Noise for the Double Tunnel Junction Coulomb Blockade

Authors: Selman Hershfield, John H. Davies, Per Hyldgaard, Christopher J. Stanton, John W. Wilkins

Abstract: We compute the zero frequency current noise numerically and in several limits analytically for the coulomb blockade problem consisting of two tunnel junctions connected in series. At low temperatures over a wide range of voltages, capacitances, and resistances it is shown that the noise measures the variance in the number of electrons in the region between the two tunnel junctions. The average c… ▽ More We compute the zero frequency current noise numerically and in several limits analytically for the coulomb blockade problem consisting of two tunnel junctions connected in series. At low temperatures over a wide range of voltages, capacitances, and resistances it is shown that the noise measures the variance in the number of electrons in the region between the two tunnel junctions. The average current, on the other hand, only measures the mean number of electrons. Thus, the noise provides additional information about transport in these devices which is not available from measuring the current alone. △ Less

Submitted 20 July, 1992; originally announced July 1992.

Comments: 33 pages, 10 figures