Showing 1–50 of 64 results for author: Wietfeld, C

Phase-Based Breathing Rate Monitoring in Patient Rooms Using 6G Terahertz Technology

Authors: Simon Haeger, Akram Najjar, Caner Bektas, Dien Lessy, Mohammed El-Absi, Fawad Sheikh, Stefan Boecker, Thomas Kaiser, Christian Wietfeld

Abstract: The 6G standard aims to be an integral part of the future economy by providing high-performance communication and sensing services. At terahertz (THz) frequencies, indoor campus networks can offer the highest sensing quality. Health monitoring in hospitals is expected to be an application site for these. This work outlines a monostatic phase-based system for breathing rate monitoring. Our feasibil… ▽ More The 6G standard aims to be an integral part of the future economy by providing high-performance communication and sensing services. At terahertz (THz) frequencies, indoor campus networks can offer the highest sensing quality. Health monitoring in hospitals is expected to be an application site for these. This work outlines a monostatic phase-based system for breathing rate monitoring. Our feasibility study observes motion measurement accuracy down to the micrometer level. However, we also find that the patient's pose needs to be considered for generalized applicability. Thus, a solution that leverages multiple propagation paths and beam orientations is proposed. △ Less

Submitted 14 June, 2023; v1 submitted 25 May, 2023; originally announced May 2023.

Comments: 5 pages, 10 figures. Accepted for presentation in: 2023 6th IEEE International Workshop on Mobile Terahertz Systems (IWMTS), Bonn, Germany, July 2023

Lessons from Robot-Assisted Disaster Response Deployments by the German Rescue Robotics Center Task Force

Authors: Hartmut Surmann, Ivana Kruijff-Korbayova, Kevin Daun, Marius Schnaubelt, Oskar von Stryk, Manuel Patchou, Stefan Boecker, Christian Wietfeld, Jan Quenzel, Daniel Schleich, Sven Behnke, Robert Grafe, Nils Heidemann, Dominik Slomma

Abstract: Earthquakes, fire, and floods often cause structural collapses of buildings. The inspection of damaged buildings poses a high risk for emergency forces or is even impossible, though. We present three recent selected missions of the Robotics Task Force of the German Rescue Robotics Center, where both ground and aerial robots were used to explore destroyed buildings. We describe and reflect the miss… ▽ More Earthquakes, fire, and floods often cause structural collapses of buildings. The inspection of damaged buildings poses a high risk for emergency forces or is even impossible, though. We present three recent selected missions of the Robotics Task Force of the German Rescue Robotics Center, where both ground and aerial robots were used to explore destroyed buildings. We describe and reflect the missions as well as the lessons learned that have resulted from them. In order to make robots from research laboratories fit for real operations, realistic test environments were set up for outdoor and indoor use and tested in regular exercises by researchers and emergency forces. Based on this experience, the robots and their control software were significantly improved. Furthermore, top teams of researchers and first responders were formed, each with realistic assessments of the operational and practical suitability of robotic systems. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: 8 pages, 9 figures, PrePrint, Technical Report, German Rescue Robotic Center

System Modeling and Performance Evaluation of Predictive QoS for Future Tele-Operated Driving

Authors: Hendrik Schippers, Cedrik Schüler, Benjamin Sliwa, Christian Wietfeld

Abstract: Future Tele-operated Driving (ToD) applications place challenging Quality of Service (QoS) demands on existing mobile communication networks that are of highly important to comply with for safe operation. New remote control and platooning services will emerge and pose high data rate and latency requirements. One key enabler for these applications is the newly available 5G New Radio (NR) promising… ▽ More Future Tele-operated Driving (ToD) applications place challenging Quality of Service (QoS) demands on existing mobile communication networks that are of highly important to comply with for safe operation. New remote control and platooning services will emerge and pose high data rate and latency requirements. One key enabler for these applications is the newly available 5G New Radio (NR) promising higher bandwidth and lower latency than its predecessors. In addition to that, public 5G networks do not consistently deliver and do not guarantee the required data rates and latency of ToD. In this paper, we discuss the communication-related requirements of tele-operated driving. ToD is regarded as a complex system consisting of multiple research areas. One key aspect of ToD is the provision and maintenance of the required data rate for teleoperation by the mobile network. An in-advance prediction method of the end-to-end data rate based on so-called Radio Environmental Maps (REMs) is discussed. Furthermore, a novel approach improving the prediction accuracy is introduced and it features individually optimized REM layers. Finally, we analyze the implementation of tele-operated driving applications on a scaled vehicular platform combined with a cyber-physical test environment consisting of real and virtual objects. This approach enables large-scale testing of remote operation and autonomous applications. △ Less

Submitted 27 January, 2022; originally announced January 2022.

DRaGon: Mining Latent Radio Channel Information from Geographical Data Leveraging Deep Learning

Authors: Benjamin Sliwa, Melina Geis, Caner Bektas, Melisa Lopéz, Preben Mogensen, Christian Wietfeld

Abstract: Radio channel modeling is one of the most fundamental aspects in the process of designing, optimizing, and simulating wireless communication networks. In this field, long-established approaches such as analytical channel models and ray tracing techniques represent the de-facto standard methodologies. However, as demonstrated by recent results, there remains an untapped potential to innovate this r… ▽ More Radio channel modeling is one of the most fundamental aspects in the process of designing, optimizing, and simulating wireless communication networks. In this field, long-established approaches such as analytical channel models and ray tracing techniques represent the de-facto standard methodologies. However, as demonstrated by recent results, there remains an untapped potential to innovate this research field by enriching model-based approaches with machine learning techniques. In this paper, we present Deep RAdio channel modeling from GeOinformatioN (DRaGon) as a novel machine learning-enabled method for automatic generation of Radio Environmental Maps (REMs) from geographical data. For achieving accurate path loss prediction results, DRaGon combines determining features extracted from a three-dimensional model of the radio propagation environment with raw images of the receiver area within a deep learning model. In a comprehensive performance evaluation and validation campaign, we compare the accuracy of the proposed approach with real world measurements, ray tracing analyses, and well-known channel models. It is found that the combination of expert knowledge from the communications domain and the data analysis capabilities of deep learning allows to achieve a significantly higher prediction accuracy than the reference methods. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Machine Learning-Enabled Data Rate Prediction for 5G NSA Vehicle-to-Cloud Communications

Authors: Benjamin Sliwa, Hendrik Schippers, Christian Wietfeld

Abstract: In order to satisfy the ever-growing Quality of Service (QoS) requirements of innovative services, cellular communication networks are constantly evolving. Recently, the 5G NonStandalone (NSA) mode has been deployed as an intermediate strategy to deliver high-speed connectivity to early adopters of 5G by incorporating Long Term Evolution (LTE) network infrastructure. In addition to the technologic… ▽ More In order to satisfy the ever-growing Quality of Service (QoS) requirements of innovative services, cellular communication networks are constantly evolving. Recently, the 5G NonStandalone (NSA) mode has been deployed as an intermediate strategy to deliver high-speed connectivity to early adopters of 5G by incorporating Long Term Evolution (LTE) network infrastructure. In addition to the technological advancements, novel communication paradigms such as anticipatory mobile networking aim to achieve a more intelligent usage of the available network resources through exploitation of context knowledge. For this purpose, novel methods for proactive prediction of the end-to-end behavior are seen as key enablers. In this paper, we present a first empirical analysis of client-based end-to-end data rate prediction for 5G NSA vehicle-to-cloud communications. Although this operation mode is characterized by massive fluctuations of the observed data rate, the results show that conventional machine learning methods can utilize locally acquirable measurements for achieving comparably accurate estimations of the end-to-end behavior. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Modeling and Simulation of Reconfigurable Intelligent Surfaces for Hybrid Aerial and Ground-based Vehicular Communications

Authors: Karsten Heimann, Benjamin Sliwa, Manuel Patchou, Christian Wietfeld

Abstract: The requirements of vehicular communications grow with increasing level of automated driving and future applications of intelligent transportation systems (ITS). Beside the ever-increasing need for high capacity radio links, reliability and latency constraints challenge the mobile network supply. While for example the millimeter-wave spectrum and THz-bands offer a vast amount of radio resources, t… ▽ More The requirements of vehicular communications grow with increasing level of automated driving and future applications of intelligent transportation systems (ITS). Beside the ever-increasing need for high capacity radio links, reliability and latency constraints challenge the mobile network supply. While for example the millimeter-wave spectrum and THz-bands offer a vast amount of radio resources, their applicability is limited due to delicate radio channel conditions and signal propagation characteristics. Reconfigurable intelligent surfaces (RISs) as part of smart radio environments (SREs) of future ITS infrastructure promise improved radio link qualities by means of purposeful cultivation of passive reflections. With this, obstructed mmWave or THz beams can be guided around obstacles through RIS reflection paths to improve the otherwise limited coverage. In this article, application use cases of RIS-enhanced vehicular communications are proposed. Beside static deployments of RISs at exterior walls of buildings, unmanned aerial vehicles (UAV) could provide reflection capabilities on demand, while future vehicles could - in a visionary approach - consist of meta-material allowing for their opportunistic utilization within an enriched SRE. Results of a case study based on our multi-scale mobility and network simulation model clearly highlight the potential of RIS deployment for hybrid vehicular communication scenarios. Path loss and outage percentages can be reduced considerably. △ Less

Submitted 29 August, 2021; originally announced August 2021.

Pushing the Limits: Resilience Testing for Mission-Critical Machine-Type Communication

Authors: Christian Arendt, Manuel Patchou, Stefan Böcker, Janis Tiemann, Christian Wietfeld

Abstract: Interdisciplinary application fields, such as automotive, industrial applications or field robotics show an increasing need for reliable and resilient wireless communication even under high load conditions. These mission-critical applications require dependable service quality characteristics in terms of latency and especially stability. Current deployments often use either wired links that lack t… ▽ More Interdisciplinary application fields, such as automotive, industrial applications or field robotics show an increasing need for reliable and resilient wireless communication even under high load conditions. These mission-critical applications require dependable service quality characteristics in terms of latency and especially stability. Current deployments often use either wired links that lack the flexibility to accommodate them, or wireless technologies that are susceptible to interference. Depending on the application and the surrounding environments, different technologies can meet the associated requirements and have to be tested deliberately to prevent unexpected system failure. To stress test these infrastructures in a reproducible and application-aware manner, we propose STING, a spatially distributed traffic and interference generation framework. STING is evaluated in a remote control test case of an Unmanned Ground Vehicle that serves as a scout in Search and Rescue missions. A significant impact of interference on the remote control quality of experience is shown in tests with different operators, which result in an 80% increase in completion time in our test scenario with high interference on the radio channel. With this case study, we have proven STING to be a reliable and reproducible way to asses resilience against interference of wireless machine-type communication use cases. Our concept can find use for any type of wireless technology, in unlicensed (e.g. Wi-Fi) as well as licensed bands (e.g. 5G). △ Less

Submitted 21 July, 2021; originally announced July 2021.

Towards Machine Learning-Enabled Context Adaption for Reliable Aerial Mesh Routing

Authors: Cedrik Schüler, Benjamin Sliwa, Christian Wietfeld

Abstract: In this paper, we present Context-Adaptive PARRoT (CA-PARRoT) as an extension of our previous work Predictive Ad-hoc Routing fueled by Reinforcement learning and Trajectory knowledge (PARRoT). Short-term effects, as occurring in urban surroundings, have shown to have a negative impact on the Reinforcement Learning (RL)-based routing process. Therefore, we add a timer-based compensation mechanism t… ▽ More In this paper, we present Context-Adaptive PARRoT (CA-PARRoT) as an extension of our previous work Predictive Ad-hoc Routing fueled by Reinforcement learning and Trajectory knowledge (PARRoT). Short-term effects, as occurring in urban surroundings, have shown to have a negative impact on the Reinforcement Learning (RL)-based routing process. Therefore, we add a timer-based compensation mechanism to the update process and introduce a hybrid Machine Learning (ML) approach to classify Radio Environment Prototypes (REPs) with a dedicated ML component and enable the protocol for autonomous context adaption. The performance of the novel protocol is evaluated in comprehensive network simulations considering different REPs and is compared to well-known established routing protocols for Mobile Ad-hoc Networks (MANETs). The results show, that CA-PARRoT is capable to compensate the challenges confronted with in different REPs and to improve its Key Performance Indicators (KPIs) up to 23% compared to PARRoT, and outperform established routing protocols by up to 50 %. △ Less

Submitted 13 July, 2021; originally announced July 2021.

Client-Based Intelligence for Resource Efficient Vehicular Big Data Transfer in Future 6G Network

Authors: Benjamin Sliwa, Rick Adam, Christian Wietfeld

Abstract: Vehicular big data is anticipated to become the "new oil" of the automotive industry which fuels the development of novel crowdsensing-enabled services. However, the tremendous amount of transmitted vehicular sensor data represents a massive challenge for the cellular network. A promising method for achieving relief which allows to utilize the existing network resources in a more efficient way is… ▽ More Vehicular big data is anticipated to become the "new oil" of the automotive industry which fuels the development of novel crowdsensing-enabled services. However, the tremendous amount of transmitted vehicular sensor data represents a massive challenge for the cellular network. A promising method for achieving relief which allows to utilize the existing network resources in a more efficient way is the utilization of intelligence on the end-edge-cloud devices. Through machine learning-based identification and exploitation of highly resource efficient data transmission opportunities, the client devices are able to participate in overall network resource optimization process. In this work, we present a novel client-based opportunistic data transmission method for delay-tolerant applications which is based on a hybrid machine learning approach: Supervised learning is applied to forecast the currently achievable data rate which serves as the metric for the reinforcement learning-based data transfer scheduling process. In addition, unsupervised learning is applied to uncover geospatially-dependent uncertainties within the prediction model. In a comprehensive real world evaluation in the public cellular networks of three German Mobile Network Operators (MNOs), we show that the average data rate can be improved by up to 223 % while simultaneously reducing the amount of occupied network resources by up to 89 %. As a side-effect of preferring more robust network conditions for the data transfer, the transmission-related power consumption is reduced by up to 73 %. The price to pay is an increased Age of Information (AoI) of the sensor data. △ Less

Submitted 17 February, 2021; originally announced February 2021.

A Low Cost Modular Radio Tomography System for Bicycle and Vehicle Detection and Classification

Authors: Marcus Haferkamp, Benjamin Sliwa, Christian Wietfeld

Abstract: The advancing deployment of ubiquitous Internet of Things (IoT)-powered vehicle detection and classification systems will successively turn the existing road infrastructure into a highly dynamical and interconnected Cyber-physical System (CPS). Though many different sensor systems have been proposed in recent years, these solutions can only meet a subset of requirements, including cost-efficiency,… ▽ More The advancing deployment of ubiquitous Internet of Things (IoT)-powered vehicle detection and classification systems will successively turn the existing road infrastructure into a highly dynamical and interconnected Cyber-physical System (CPS). Though many different sensor systems have been proposed in recent years, these solutions can only meet a subset of requirements, including cost-efficiency, robustness, accuracy, and privacy preservation. This paper provides a modular system approach that exploits radio tomography in terms of attenuation patterns and highly accurate channel information for reliable and robust detection and classification of different road users. Hereto, we use Wireless Local Area Network (WLAN) and Ultra-Wideband (UWB) transceiver modules providing either Channel State Information (CSI) or Channel Impulse Response (CIR) data. Since the proposed system utilizes off-the-shelf and power-efficient embedded systems, it allows for a cost-efficient ad-hoc deployment in existing road infrastructures. We have evaluated the proposed system's performance for cyclists and other motorized vehicles with an experimental live deployment. In this concern, the primary focus has been on the accurate detection of cyclists on a bicycle path. However, we also have conducted preliminary evaluation tests measuring different motorized vehicles using a similar system configuration as for the cyclists. In summary, the system achieves up to 100% accuracy for detecting cyclists and more than 98% classifying cyclists and cars. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Comments: 7 pages, 9 figures, 3 tables, Accepted for presentation in: 2021 Annual IEEE International Systems Conference (SysCon)

Flying Robots for Safe and Efficient Parcel Delivery Within the COVID-19 Pandemic

Authors: Manuel Patchou, Benjamin Sliwa, Christian Wietfeld

Abstract: The integration of small-scale Unmanned Aerial Vehicles (UAVs) into Intelligent Transportation Systems (ITSs) will empower novel smart-city applications and services. After the unforeseen outbreak of the COVID-19 pandemic, the public demand for delivery services has multiplied. Mobile robotic systems inherently offer the potential for minimizing the amount of direct human-to-human interactions wit… ▽ More The integration of small-scale Unmanned Aerial Vehicles (UAVs) into Intelligent Transportation Systems (ITSs) will empower novel smart-city applications and services. After the unforeseen outbreak of the COVID-19 pandemic, the public demand for delivery services has multiplied. Mobile robotic systems inherently offer the potential for minimizing the amount of direct human-to-human interactions with the parcel delivery process. The proposed system-of-systems consists of various complex aspects such as assigning and distributing delivery jobs, establishing and maintaining reliable communication links between the vehicles, as well as path planning and mobility control. In this paper, we apply a system-level perspective for identifying key challenges and promising solution approaches for modeling, analysis, and optimization of UAV-aided parcel delivery. We present a system-of-systems model for UAV-assisted parcel delivery to cope with higher capacity requirements induced by the COVID-19. To demonstrate the benefits of hybrid vehicular delivery, we present a case study focusing on the prioritization of time-critical deliveries such as medical goods. The results further confirm that the capacity of traditional delivery fleets can be upgraded with drone usage. Furthermore, we observe that the delay incurred by prioritizing time-critical deliveries can be compensated with drone deployment. Finally, centralized and decentralized communication approaches for data transmission inside hybrid delivery fleets are compared. △ Less

Submitted 19 January, 2021; originally announced January 2021.

PARRoT: Predictive Ad-hoc Routing Fueled by Reinforcement Learning and Trajectory Knowledge

Authors: Benjamin Sliwa, Cedrik Schüler, Manuel Patchou, Christian Wietfeld

Abstract: Swarms of collaborating Unmanned Aerial Vehicles (UAVs) that utilize ad-hoc networking technologies for coordinating their actions offer the potential to catalyze emerging research fields such as autonomous exploration of disaster areas, demanddriven network provisioning, and near field packet delivery in Intelligent Transportation Systems (ITSs). As these mobile robotic networks are characterized… ▽ More Swarms of collaborating Unmanned Aerial Vehicles (UAVs) that utilize ad-hoc networking technologies for coordinating their actions offer the potential to catalyze emerging research fields such as autonomous exploration of disaster areas, demanddriven network provisioning, and near field packet delivery in Intelligent Transportation Systems (ITSs). As these mobile robotic networks are characterized by high grades of relative mobility, existing routing protocols often fail to adopt their decision making to the implied network topology dynamics. For addressing these challenges, we present Predictive Ad-hoc Routing fueled by Reinforcement learning and Trajectory knowledge (PARRoT) as a novel machine learning-enabled routing protocol which exploits mobility control information for integrating knowledge about the future motion of the mobile agents into the routing process. The performance of the proposed routing approach is evaluated using comprehensive network simulation. In comparison to established routing protocols, PARRoT achieves a massively higher robustness and a significantly lower end-to-end latency. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Deep Learning-based Signal Strength Prediction Using Geographical Images and Expert Knowledge

Authors: Jakob Thrane, Benjamin Sliwa, Christian Wietfeld, Henrik Christiansen

Abstract: Methods for accurate prediction of radio signal quality parameters are crucial for optimization of mobile networks, and a necessity for future autonomous driving solutions. The power-distance relation of current empirical models struggles with describing the specific local geo-statistics that influence signal quality parameters. The use of empirical models commonly results in an over- or under-est… ▽ More Methods for accurate prediction of radio signal quality parameters are crucial for optimization of mobile networks, and a necessity for future autonomous driving solutions. The power-distance relation of current empirical models struggles with describing the specific local geo-statistics that influence signal quality parameters. The use of empirical models commonly results in an over- or under-estimation of the signal quality parameters and require additional calibration studies. In this paper, we present a novel model-aided deep learning approach for path loss prediction, which implicitly extracts radio propagation characteristics from top-view geographical images of the receiver location. In a comprehensive evaluation campaign, we apply the proposed method on an extensive real-world data set consisting of five different scenarios and more than 125.000 individual measurements. It is found that 1) the novel approach reduces the average prediction error by up to 53% in comparison to ray-tracing techniques, 2) A distance of 250-300 meters spanned by the images offer the necessary level of detail, 3) Predictions with a root-mean-squared error of approximately 6 dB is achieved across inherently different data sources. △ Less

Submitted 18 August, 2020; originally announced August 2020.

The Best of Both Worlds: Hybrid Data-Driven and Model-Based Vehicular Network Simulation

Authors: Benjamin Sliwa, Manuel Patchou, Christian Wietfeld

Abstract: The analysis of the end-to-end behavior of novel mobile communication methods in concrete evaluation scenarios frequently results in a methodological dilemma: Real world measurement campaigns are highly time-consuming and lack of a controllable environment, the derivation of analytical models is often not possible due to the immense system complexity, system-level network simulations imply simplif… ▽ More The analysis of the end-to-end behavior of novel mobile communication methods in concrete evaluation scenarios frequently results in a methodological dilemma: Real world measurement campaigns are highly time-consuming and lack of a controllable environment, the derivation of analytical models is often not possible due to the immense system complexity, system-level network simulations imply simplifications that result in significant derivations to the real world observations. In this paper, we present a hybrid simulation approach which brings together model-based mobility simulation, multi-dimensional Radio Environmental Maps (REMs) for efficient maintenance of radio propagation data, and Data-driven Network Simulation (DDNS) for fast and accurate analysis of the end-to-end behavior of mobile networks. For the validation, we analyze an opportunistic vehicular data transfer use-case and compare the proposed method to real world measurements and a corresponding simulation setup in Network Simulator 3 (ns-3). In comparison to the latter, the proposed method is not only able to better mimic the real world behavior, it also achieves a 300 times higher computational efficiency. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Acting Selfish for the Good of All: Contextual Bandits for Resource-Efficient Transmission of Vehicular Sensor Data

Authors: Benjamin Sliwa, Rick Adam, Christian Wietfeld

Abstract: as a novel client-based method for resource-efficient opportunistic transmission of delay-tolerant vehicular sensor data. BS-CB applies a hybrid approach which brings together all major machine learning disciplines - supervised, unsupervised, and reinforcement learning - in order to autonomously schedule vehicular sensor data transmissions with respect to the expected resource efficiency. Within a… ▽ More as a novel client-based method for resource-efficient opportunistic transmission of delay-tolerant vehicular sensor data. BS-CB applies a hybrid approach which brings together all major machine learning disciplines - supervised, unsupervised, and reinforcement learning - in order to autonomously schedule vehicular sensor data transmissions with respect to the expected resource efficiency. Within a comprehensive real world performance evaluation in the public cellular networks of three Mobile Network Operators (MNOs), it is found that 1) The average uplink data rate is improved by 125%-195% 2) The apparently selfish goal of data rate optimization reduces the amount of occupied cell resources by 84%-89% 3) The average transmission-related power consumption can be reduced by 53%-75% 4) The price to pay is an additional buffering delay due to the opportunistic medium access strategy. △ Less

Submitted 20 July, 2020; originally announced July 2020.

White Paper on Critical and Massive Machine Type Communication Towards 6G

Authors: Nurul Huda Mahmood, Stefan Böcker, Andrea Munari, Federico Clazzer, Ingrid Moerman, Konstantin Mikhaylov, Onel Lopez, Ok-Sun Park, Eric Mercier, Hannes Bartz, Riku Jäntti, Ravikumar Pragada, Yihua Ma, Elina Annanperä, Christian Wietfeld, Martin Andraud, Gianluigi Liva, Yan Chen, Eduardo Garro, Frank Burkhardt, Hirley Alves, Chen-Feng Liu, Yalcin Sadi, Jean-Baptiste Dore, Eunah Kim , et al. (6 additional authors not shown)

Abstract: The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transfor… ▽ More The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transformation of the society. However, it is evident that some of the more demanding requirements cannot be fully supported by 5G networks. Alongside, further development of the society towards 2030 will give rise to new and more stringent requirements on wireless connectivity in general, and MTC in particular. Driven by the societal trends towards 2030, the next generation (6G) will be an agile and efficient convergent network serving a set of diverse service classes and a wide range of key performance indicators (KPI). This white paper explores the main drivers and requirements of an MTC-optimized 6G network, and discusses the following six key research questions: - Will the main KPIs of 5G continue to be the dominant KPIs in 6G; or will there emerge new key metrics? - How to deliver different E2E service mandates with different KPI requirements considering joint-optimization at the physical up to the application layer? - What are the key enablers towards designing ultra-low power receivers and highly efficient sleep modes? - How to tackle a disruptive rather than incremental joint design of a massively scalable waveform and medium access policy for global MTC connectivity? - How to support new service classes characterizing mission-critical and dependable MTC in 6G? - What are the potential enablers of long term, lightweight and flexible privacy and security schemes considering MTC device requirements? △ Less

Submitted 4 May, 2020; v1 submitted 29 April, 2020; originally announced April 2020.

Comments: White paper by http://www.6GFlagship.com

6G White Paper on Machine Learning in Wireless Communication Networks

Authors: Samad Ali, Walid Saad, Nandana Rajatheva, Kapseok Chang, Daniel Steinbach, Benjamin Sliwa, Christian Wietfeld, Kai Mei, Hamid Shiri, Hans-Jürgen Zepernick, Thi My Chinh Chu, Ijaz Ahmad, Jyrki Huusko, Jaakko Suutala, Shubhangi Bhadauria, Vimal Bhatia, Rangeet Mitra, Saidhiraj Amuru, Robert Abbas, Baohua Shao, Michele Capobianco, Guanghui Yu, Maelick Claes, Teemu Karvonen, Mingzhe Chen , et al. (2 additional authors not shown)

Abstract: The focus of this white paper is on machine learning (ML) in wireless communications. 6G wireless communication networks will be the backbone of the digital transformation of societies by providing ubiquitous, reliable, and near-instant wireless connectivity for humans and machines. Recent advances in ML research has led enable a wide range of novel technologies such as self-driving vehicles and v… ▽ More The focus of this white paper is on machine learning (ML) in wireless communications. 6G wireless communication networks will be the backbone of the digital transformation of societies by providing ubiquitous, reliable, and near-instant wireless connectivity for humans and machines. Recent advances in ML research has led enable a wide range of novel technologies such as self-driving vehicles and voice assistants. Such innovation is possible as a result of the availability of advanced ML models, large datasets, and high computational power. On the other hand, the ever-increasing demand for connectivity will require a lot of innovation in 6G wireless networks, and ML tools will play a major role in solving problems in the wireless domain. In this paper, we provide an overview of the vision of how ML will impact the wireless communication systems. We first give an overview of the ML methods that have the highest potential to be used in wireless networks. Then, we discuss the problems that can be solved by using ML in various layers of the network such as the physical layer, medium access layer, and application layer. Zero-touch optimization of wireless networks using ML is another interesting aspect that is discussed in this paper. Finally, at the end of each section, important research questions that the section aims to answer are presented. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Simulating Hybrid Aerial- and Ground-based Vehicular Networks with ns-3 and LIMoSim

Authors: Benjamin Sliwa, Manuel Patchou, Karsten Heimann, Christian Wietfeld

Abstract: Integrating Unmanned Aerial Vehicles (UAVs) into future Intelligent Transportation Systems (ITSs) allows to exploit their unique mobility potentials for improving the performance of services such as near-field parcel delivery, dynamic network provisioning, and aerial sensing. In order to provide a controllable environment for the methodological performance analysis, simulation frameworks need to s… ▽ More Integrating Unmanned Aerial Vehicles (UAVs) into future Intelligent Transportation Systems (ITSs) allows to exploit their unique mobility potentials for improving the performance of services such as near-field parcel delivery, dynamic network provisioning, and aerial sensing. In order to provide a controllable environment for the methodological performance analysis, simulation frameworks need to support ground- and aerial-based mobility as well as the involved communication technologies. In this paper, we present the open source Lightweight ICT-centric Mobility Simulation (LIMoSim) framework for simulating hybrid vehicular networks within Network Simulator 3 (ns-3). LIMoSim implements a shared codebase coupling approach which integrates all required components in a single simulation process. The low-level mobility behaviors rely on well-known analytical models. Different case studies discussing cutting-edge communication technologies such as Cellular Vehicle-to-Everything (C-V2X) and millimeter Wave (mmWave) are presented in order to illustrate how the proposed framework can be integrated into ns-3-based network simulation setups. △ Less

Submitted 22 March, 2020; originally announced March 2020.

The Channel as a Traffic Sensor: Vehicle Detection and Classification based on Radio Fingerprinting

Authors: Benjamin Sliwa, Niko Piatkowski, Christian Wietfeld

Abstract: Ubiquitously deployed Internet of Things (IoT)- based automatic vehicle classification systems will catalyze data-driven traffic flow optimization in future smart cities and will transform the road infrastructure itself into a dynamically sensing Cyber-physical System (CPS). Although a wide range of different traffic sensing systems has been proposed, the existing solutions are not yet able to sim… ▽ More Ubiquitously deployed Internet of Things (IoT)- based automatic vehicle classification systems will catalyze data-driven traffic flow optimization in future smart cities and will transform the road infrastructure itself into a dynamically sensing Cyber-physical System (CPS). Although a wide range of different traffic sensing systems has been proposed, the existing solutions are not yet able to simultaneously satisfy the multitude of requirements, e.g., accuracy, robustness, cost-efficiency, and privacy preservation. In this paper, we present a novel approach, which exploits radio fingerprints - multidimensional attenuation patterns of wireless signals - for accurate and robust vehicle detection and classification. The proposed system can be deployed in a highly cost-efficient manner as it relies on off-the-shelf embedded devices which are installed into existing delineator posts. In a comprehensive field evaluation campaign, the performance of the radio fingerprinting-based approach is analyzed within an experimental live deployment on a German highway, where it is able to achieve a binary classification success ratio of more than 99% and an overall accuracy of 93.83% for a classification task with seven different classes. △ Less

Submitted 25 March, 2020; v1 submitted 22 March, 2020; originally announced March 2020.

Journal ref: IEEE Internet of Things Journal 2020

LIMITS: Lightweight Machine Learning for IoT Systems with Resource Limitations

Authors: Benjamin Sliwa, Nico Piatkowski, Christian Wietfeld

Abstract: Exploiting big data knowledge on small devices will pave the way for building truly cognitive Internet of Things (IoT) systems. Although machine learning has led to great advancements for IoT-based data analytics, there remains a huge methodological gap for the deployment phase of trained machine learning models. For given resource-constrained platforms such as Microcontroller Units (MCUs), model… ▽ More Exploiting big data knowledge on small devices will pave the way for building truly cognitive Internet of Things (IoT) systems. Although machine learning has led to great advancements for IoT-based data analytics, there remains a huge methodological gap for the deployment phase of trained machine learning models. For given resource-constrained platforms such as Microcontroller Units (MCUs), model choice and parametrization are typically performed based on heuristics or analytical models. However, these approaches are only able to provide rough estimates of the required system resources as they do not consider the interplay of hardware, compiler specific optimizations, and code dependencies. In this paper, we present the novel open source framework LIghtweight Machine learning for IoT Systems (LIMITS), which applies a platform-in-the-loop approach explicitly considering the actual compilation toolchain of the target IoT platform. LIMITS focuses on high level tasks such as experiment automation, platform-specific code generation, and sweet spot determination. The solid foundations of validated low-level model implementations are provided by the coupled well-established data analysis framework Waikato Environment for Knowledge Analysis (WEKA). We apply and validate LIMITS in two case studies focusing on cellular data rate prediction and radio-based vehicle classification, where we compare different learning models and real world IoT platforms with memory constraints from 16 kB to 4 MB and demonstrate its potential to catalyze the development of machine learning enabled IoT systems. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Towards Cooperative Data Rate Prediction for Future Mobile and Vehicular 6G Networks

Authors: Benjamin Sliwa, Robert Falkenberg, Christian Wietfeld

Abstract: Machine learning-based data rate prediction is one of the key drivers for anticipatory mobile networking with applications such as dynamic Radio Access Technology (RAT) selection, opportunistic data transfer, and predictive caching. User Equipment (UE)-based prediction approaches that rely on passive measurements of network quality indicators have successfully been applied to forecast the throughp… ▽ More Machine learning-based data rate prediction is one of the key drivers for anticipatory mobile networking with applications such as dynamic Radio Access Technology (RAT) selection, opportunistic data transfer, and predictive caching. User Equipment (UE)-based prediction approaches that rely on passive measurements of network quality indicators have successfully been applied to forecast the throughput of vehicular data transmissions. However, the achievable prediction accuracy is limited as the UE is unaware of the current network load. To overcome this issue, we propose a cooperative data rate prediction approach which brings together knowledge from the client and network domains. In a real world proof-of-concept evaluation, we utilize the Software Defined Radio (SDR)-based control channel sniffer FALCON in order to mimic the behavior of a possible network-assisted information provisioning within future 6G networks. The results show that the proposed cooperative prediction approach is able to reduce the average prediction error by up to 30%. With respect to the ongoing standardization efforts regarding the implementation of intelligence for network management, we argue that future 6G networks should go beyond network-focused approaches and actively provide load information to the UEs in order to fuel pervasive machine learning and catalyze UE-based network optimization techniques. △ Less

Submitted 26 January, 2020; originally announced January 2020.

A Reinforcement Learning Approach for Efficient Opportunistic Vehicle-to-Cloud Data Transfer

Authors: Benjamin Sliwa, Christian Wietfeld

Abstract: Vehicular crowdsensing is anticipated to become a key catalyst for data-driven optimization in the Intelligent Transportation System (ITS) domain. Yet, the expected growth in massive Machine-type Communication (mMTC) caused by vehicle-to-cloud transmissions will confront the cellular network infrastructure with great capacity-related challenges. A cognitive way for achieving relief without introdu… ▽ More Vehicular crowdsensing is anticipated to become a key catalyst for data-driven optimization in the Intelligent Transportation System (ITS) domain. Yet, the expected growth in massive Machine-type Communication (mMTC) caused by vehicle-to-cloud transmissions will confront the cellular network infrastructure with great capacity-related challenges. A cognitive way for achieving relief without introducing additional physical infrastructure is the application of opportunistic data transfer for delay-tolerant applications. Hereby, the clients schedule their data transmissions in a channel-aware manner in order to avoid retransmissions and interference with other cell users. In this paper, we introduce a novel approach for this type of resourceaware data transfer which brings together supervised learning for network quality prediction with reinforcement learningbased decision making. The performance evaluation is carried out using data-driven network simulation and real world experiments in the public cellular networks of multiple Mobile Network Operators (MNOs) in different scenarios. The proposed transmission scheme significantly outperforms state-of-the-art probabilistic approaches in most scenarios and achieves data rate improvements of up to 181% in uplink and up to 270% in downlink transmission direction in comparison to conventional periodic data transfer. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Data-driven Network Simulation for Performance Analysis of Anticipatory Vehicular Communication Systems

Authors: Benjamin Sliwa, Christian Wietfeld

Abstract: The provision of reliable connectivity is envisioned as a key enabler for future autonomous driving. Anticipatory communication techniques have been proposed for proactively considering the properties of the highly dynamic radio channel within the communication systems themselves. Since real world experiments are highly time-consuming and lack a controllable environment, performance evaluations an… ▽ More The provision of reliable connectivity is envisioned as a key enabler for future autonomous driving. Anticipatory communication techniques have been proposed for proactively considering the properties of the highly dynamic radio channel within the communication systems themselves. Since real world experiments are highly time-consuming and lack a controllable environment, performance evaluations and parameter studies for novel anticipatory vehicular communication systems are typically carried out based on network simulations. However, due to the required simplifications and the wide range of unknown parameters (e.g., Mobile Network Operator (MNO)-specific configurations of the network infrastructure), the achieved results often differ significantly from the behavior in real world evaluations. In this paper, we present Data-driven Network Simulation (DDNS) as a novel data-driven approach for analyzing and optimizing anticipatory vehicular communication systems. Different machine learning models are combined for achieving a close to reality representation of the analyzed system's behavior. In a proof of concept evaluation focusing on opportunistic vehicular data transfer, the proposed method is validated against field measurements and system-level network simulation. In contrast to the latter, DDNS does not only provide massively faster result generation, it also achieves a significantly better representation of the real world behavior due to implicit consideration of cross-layer dependencies by the machine learning approach. △ Less

Submitted 28 November, 2019; v1 submitted 25 November, 2019; originally announced November 2019.

Journal ref: IEEE Access (2019)

Unmanned Aerial Vehicles in Logistics: Efficiency Gains and Communication Performance of Hybrid Combinations of Ground and Aerial Vehicles

Authors: Manuel Patchou, Benjamin Sliwa, Christian Wietfeld

Abstract: Unmanned Aerial Vehicles (UAVs) have drastically gained popularity in various Intelligent Transportation System (ITS) applications to improve the safety and efficiency of transportation systems. In this context, the combination of ground vehicles, such as delivery trucks, with drones to assist in the last mile pick-up and delivery of the parcels has been recently proposed. While aerial vehicles pr… ▽ More Unmanned Aerial Vehicles (UAVs) have drastically gained popularity in various Intelligent Transportation System (ITS) applications to improve the safety and efficiency of transportation systems. In this context, the combination of ground vehicles, such as delivery trucks, with drones to assist in the last mile pick-up and delivery of the parcels has been recently proposed. While aerial vehicles promise increased efficiency based on flexible routes and parallelized operation, highly reliable wireless communication is also required for the control and coordination of potentially many drones acting in a self-organized way. In this paper, we analyze the improvements procured by drone usage in parcel delivery compared to traditional delivery and propose a simulation framework to further quantify the efficiency gains of the parcel delivery logistics and to analyze the performance of different wireless communications options. To this end, we consider a heterogeneous vehicle routing problem with various constraints. We consider two approaches regarding the dispatching and recovery of drones and evaluate their benefits as opposed to parcel delivery with a classic truck only. Furthermore, we compare two networking technologies for enabling coordination of the self-organizing teams of drones with a realistically modeled environment: one approach relying on base station oriented Long Term Evolution (LTE) vs. a more decentralized Cellular Vehicle-to-Everything (C-V2X) solution. The results show time savings of nearly 40% can be achieved through drone usage and that the negative impact of urban shadowing on network communications in the base station oriented LTE approach can be compensated by leveraging decentralized C-V2X communications △ Less

Submitted 7 November, 2019; v1 submitted 23 October, 2019; originally announced October 2019.

Robust Cellular Communications for Unmanned Aerial Vehicles in Maritime Search and Rescue

Authors: Philipp Gorczak, Caner Bektas, Fabian Kurtz, Thomas Lübcke, Christian Wietfeld

Abstract: Unmanned aerial vehicles (UAV) are a promising technology for fast, large scale survey operations such as maritime search and rescue (SAR). However, providing reliable communications over long distances remains a challenge. Cellular technology such as Long Term Evolution (LTE) is designed to perform well in the presence of fast-moving clients and highly dynamic channel conditions. Yet, its generic… ▽ More Unmanned aerial vehicles (UAV) are a promising technology for fast, large scale survey operations such as maritime search and rescue (SAR). However, providing reliable communications over long distances remains a challenge. Cellular technology such as Long Term Evolution (LTE) is designed to perform well in the presence of fast-moving clients and highly dynamic channel conditions. Yet, its generic medium access mechanisms make it hard to support low-latency uplink traffic, which is needed for real-time command and control and similar applications. In this paper, we introduce an unmanned aerial system for maritime SAR, supported via an LTE data link. To mitigate drawbacks in uplink channel access, we develop a resource-guaranteed scheme based on persistent scheduling, using an open-source LTE stack. The approach is evaluated with a laboratory setup using software-defined radio modules. Measurements are taken on the application layer, using real-world telemetry data generated by an autopilot system in the presence of high bandwidth background traffic. Evaluations demonstrate that our system fulfills UAV requirements in terms of latency and reliability. Latency is further reduced to 6 ms on average and a 99.9th percentile of 10 ms by application-aware overprovisioning for mission-critical traffic and users. △ Less

Submitted 29 July, 2019; originally announced July 2019.

Comments: IEEE International Symposium on Safety, Security, and Rescue Robotics

FALCON: An accurate real-time monitor for client-based mobile network data analytics

Authors: Robert Falkenberg, Christian Wietfeld

Abstract: Network data analysis is the fundamental basis for the development of methods to increase service quality in mobile networks. This requires accurate data of the current load in the network. The control channel analysis is a way to monitor the resource allocations and the throughput of all active subscribers in a public mobile radio cell. Previous open-source approaches require either ideal radio c… ▽ More Network data analysis is the fundamental basis for the development of methods to increase service quality in mobile networks. This requires accurate data of the current load in the network. The control channel analysis is a way to monitor the resource allocations and the throughput of all active subscribers in a public mobile radio cell. Previous open-source approaches require either ideal radio conditions or long-term observations in order to obtain reliable data. Otherwise, the revealed information is polluted by spurious assignments with random content. In this paper, we present a new open-source instrument for Fast Analysis of LTE Control channels (FALCON), which combines a novel shortcut-decoding approach with the most reliable techniques known to us to reduce the aforementioned requirements significantly. Long-term field measurements reveal that FALCON reduces errors in average by three orders of magnitude compared to currently the best approach. FALCON allows observations at locations with interference and enables mobile applications with single short-term tracking of the local load situation. It is compatible with numerous software defined radios and can be used on standard computers for a reliable real-time analysis. △ Less

Submitted 4 March, 2020; v1 submitted 23 July, 2019; originally announced July 2019.

Comments: Accepted for presentation in: GLOBECOM 2019 - 2019 IEEE Global Communications Conference

Journal ref: 2019 IEEE Global Communications Conference (GLOBECOM)

Performance Analysis of C-V2X Mode 4 Communication Introducing an Open-Source C-V2X Simulator

Authors: Fabian Eckermann, Moritz Kahlert, Christian Wietfeld

Abstract: Autonomous vehicles, on the ground and in the air, are the next big evolution in human mobility. While autonomous driving in highway scenarios is already possible using only the vehicles sensors, the complex scenarios of big cities with all its different traffic participants is still a vision. Cellular Vehicle-to-Everything (C-V2X) communication is a necessary enabler of this vision and and an eme… ▽ More Autonomous vehicles, on the ground and in the air, are the next big evolution in human mobility. While autonomous driving in highway scenarios is already possible using only the vehicles sensors, the complex scenarios of big cities with all its different traffic participants is still a vision. Cellular Vehicle-to-Everything (C-V2X) communication is a necessary enabler of this vision and and an emerging field of interest in today's research. However, to the best of our knowledge open source simulators essential for open research do not exist yet. In this work we present our open source C-V2X mode 4 simulator based on the discrete-event network simulator ns-3. To analyze the performance of C-V2X mode 4 using our simulator, we created a worst case scenario and the 3GPP reference Manhattan grid scenario using the microscopic traffic simulator SUMO. We also added the WINNER+ B1 channel model to ns-3, as this is also used by 3GPP. Our results show, that C-V2X is scalable to 250 vehicles within a worst case scenario on a playground of 100 m x 100 m, with respect to the LTE rel. 14 V2X requirements. For the more realistic Manhattan grid scenario, the performance is better, as to be expected. We also analyzed the Packet Inter-Reception time with an outcome of max. 100 ms for more than 99 % of all transmissions. In addition, we investigated the impact of the Resource Reservation Period and the Resource Reselection Probability on the system's Packet Reception Ratio. △ Less

Submitted 23 July, 2019; originally announced July 2019.

Lightweight Simulation of Hybrid Aerial- and Ground-based Vehicular Communication Networks

Authors: Benjamin Sliwa, Manuel Patchou, Christian Wietfeld

Abstract: Cooperating small-scale Unmanned Aerial Vehicles (UAVs) will open up new application fields within next-generation Intelligent Transportation Sytems (ITSs), e.g., airborne near field delivery. In order to allow the exploitation of the potentials of hybrid vehicular scenarios, reliable and efficient bidirectional communication has to be guaranteed in highly dynamic environments. For addressing thes… ▽ More Cooperating small-scale Unmanned Aerial Vehicles (UAVs) will open up new application fields within next-generation Intelligent Transportation Sytems (ITSs), e.g., airborne near field delivery. In order to allow the exploitation of the potentials of hybrid vehicular scenarios, reliable and efficient bidirectional communication has to be guaranteed in highly dynamic environments. For addressing these novel challenges, we present a lightweight framework for integrated simulation of aerial and ground-based vehicular networks. Mobility and communication are natively brought together using a shared codebase coupling approach, which catalyzes the development of novel context-aware optimization methods that exploit interdependencies between both domains. In a proof-of-concept evaluation, we analyze the exploitation of UAVs as local aerial sensors as well as aerial base stations. In addition, we compare the performance of Long Term Evolution (LTE) and Cellular Vehicle-to-Everything (C-V2X) for connecting the ground- and air-based vehicles. △ Less

Submitted 22 November, 2019; v1 submitted 21 June, 2019; originally announced June 2019.

Journal ref: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall)

Boosting Vehicle-to-cloud Communication by Machine Learning-enabled Context Prediction

Authors: Benjamin Sliwa, Robert Falkenberg, Thomas Liebig, Nico Piatkowski, Christian Wietfeld

Abstract: The exploitation of vehicles as mobile sensors acts as a catalyst for novel crowdsensing-based applications such as intelligent traffic control and distributed weather forecast. However, the massive increases in Machine-type Communication (MTC) highly stress the capacities of the network infrastructure. With the system-immanent limitation of resources in cellular networks and the resource competit… ▽ More The exploitation of vehicles as mobile sensors acts as a catalyst for novel crowdsensing-based applications such as intelligent traffic control and distributed weather forecast. However, the massive increases in Machine-type Communication (MTC) highly stress the capacities of the network infrastructure. With the system-immanent limitation of resources in cellular networks and the resource competition between human cell users and MTC, more resource-efficient channel access methods are required in order to improve the coexistence of the different communicating entities. In this paper, we present a machine learning-enabled transmission scheme for client-side opportunistic data transmission. By considering the measured channel state as well as the predicted future channel behavior, delay-tolerant MTC is performed with respect to the anticipated resource-efficiency. The proposed mechanism is evaluated in comprehensive field evaluations in public Long Term Evolution (LTE) networks, where it is able to increase the mean data rate by 194% while simultaneously reducing the average power consumption by up to 54%. △ Less

Submitted 19 July, 2019; v1 submitted 23 April, 2019; originally announced April 2019.

Journal ref: IEEE Transactions on Intelligent Transportation Systems, 2019

Towards Data-driven Simulation of End-to-end Network Performance Indicators

Authors: Benjamin Sliwa, Christian Wietfeld

Abstract: Novel vehicular communication methods are mostly analyzed simulatively or analytically as real world performance tests are highly time-consuming and cost-intense. Moreover, the high number of uncontrollable effects makes it practically impossible to reevaluate different approaches under the exact same conditions. However, as these methods massively simplify the effects of the radio environment and… ▽ More Novel vehicular communication methods are mostly analyzed simulatively or analytically as real world performance tests are highly time-consuming and cost-intense. Moreover, the high number of uncontrollable effects makes it practically impossible to reevaluate different approaches under the exact same conditions. However, as these methods massively simplify the effects of the radio environment and various cross-layer interdependencies, the results of end-to-end indicators (e.g., the resulting data rate) often differ significantly from real world measurements. In this paper, we present a data-driven approach that exploits a combination of multiple machine learning methods for modeling the end-to-end behavior of network performance indicators within vehicular networks. The proposed approach can be exploited for fast and close to reality evaluation and optimization of new methods in a controllable environment as it implicitly considers cross-layer dependencies between measurable features. Within an example case study for opportunistic vehicular data transfer, the proposed approach is validated against real world measurements and a classical system-level network simulation setup. Although the proposed method does only require a fraction of the computation time of the latter, it achieves a significantly better match with the real world evaluations. △ Less

Submitted 21 November, 2019; v1 submitted 23 April, 2019; originally announced April 2019.

Journal ref: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall)

Empirical Analysis of Client-based Network Quality Prediction in Vehicular Multi-MNO Networks

Authors: Benjamin Sliwa, Christian Wietfeld

Abstract: Multi-Mobile Network Operator (MNO) networking is a promising method to exploit the joint force of multiple available cellular data connections within vehicular networks. By applying anticipatory communication principles, data transmissions can dynamically utilize the mobile network with the highest estimated network performance in order to achieve improvements in data rate, resource efficiency, a… ▽ More Multi-Mobile Network Operator (MNO) networking is a promising method to exploit the joint force of multiple available cellular data connections within vehicular networks. By applying anticipatory communication principles, data transmissions can dynamically utilize the mobile network with the highest estimated network performance in order to achieve improvements in data rate, resource efficiency, and reliability. In this paper, we present the results of a comprehensive real-world measurement campaign in public cellular networks in different scenarios and analyze the performance of online data rate prediction based on multiple machine learning models and data aggregation strategies. It is shown that multi-MNO approaches are able to achieve significant benefits for all considered network quality and end-to-end indicators even in the presence of a single dominant MNO. However, the analysis points out that anticipatory multi-MNO communication requires the consideration of MNO-specific machine learning models since the impact of the different features is highly depending on the configuration of the network infrastructure. △ Less

Submitted 21 November, 2019; v1 submitted 23 April, 2019; originally announced April 2019.

Journal ref: IEEE 90th Vehicular Technology Conference (VTC2019-Fall)

Towards Resilient 5G: Lessons Learned from Experimental Evaluations of LTE Uplink Jamming

Authors: Felix Girke, Fabian Kurtz, Nils Dorsch, Christian Wietfeld

Abstract: Energy, water, health, transportation and emergency services act as backbones for our society. Aiming at high degrees of efficiency, these systems are increasingly automated, depending on communication systems. However, this makes these Critical Infrastructures (CI) prone to cyber attacks, resulting in data leaks, reduced performance or even total system failure. Beyond a survey of existing vulner… ▽ More Energy, water, health, transportation and emergency services act as backbones for our society. Aiming at high degrees of efficiency, these systems are increasingly automated, depending on communication systems. However, this makes these Critical Infrastructures (CI) prone to cyber attacks, resulting in data leaks, reduced performance or even total system failure. Beyond a survey of existing vulnerabilities, we provide an experimental evaluation of targeted uplink jamming against LTE's air interface. Primarily, our implementations of smart attacks on the LTE Physical Uplink Control Channel (PUCCH), the Physical Uplink Shared Channel (PUSCH) as well as on the radio access procedure are outlined and tested. In exploiting the unencrypted resource assignment process, these attacks are able to target and jam specific UE resources, effectively denying uplink access. Evaluation results reveal the criticality of such attacks, severely destabilizing CI, while minimizing attacker exposure. Finally we derive possible mitigations and recommendations for 5G stakeholders, which serve to improve the robustness of mission critical communications and enable the design of resilient next generation mobile networks. △ Less

Submitted 26 March, 2019; originally announced March 2019.

Comments: 6 pages, 6 figures, Accepted by IEEE International Conference on Communications 2019 (ICC 2019), Wireless Physical Layer Security Workshop

System-of-Systems Modeling, Analysis and Optimization of Hybrid Vehicular Traffic

Authors: Benjamin Sliwa, Thomas Liebig, Tim Vranken, Michael Schreckenberg, Christian Wietfeld

Abstract: While the development of fully autonomous vehicles is one of the major research fields in the Intelligent Transportation Systems (ITSs) domain, the upcoming longterm transition period - the hybrid vehicular traffic - is often neglected. However, within the next decades, automotive systems with heterogeneous autonomy levels will share the same road network, resulting in new problems for traffic man… ▽ More While the development of fully autonomous vehicles is one of the major research fields in the Intelligent Transportation Systems (ITSs) domain, the upcoming longterm transition period - the hybrid vehicular traffic - is often neglected. However, within the next decades, automotive systems with heterogeneous autonomy levels will share the same road network, resulting in new problems for traffic management systems and communication network infrastructure providers. In this paper, we identify key challenges of the upcoming hybrid traffic scenario and present a system-of-systems model, which brings together approaches and methods from traffic modeling, data science, and communication engineering in order to allow data-driven traffic flow optimization. The proposed model consists of data acquisition, data transfer, data analysis, and data exploitation and exploits real world sensor data as well as simulative optimization methods. Based on the results of multiple case studies, which focus on individual challenges (e.g., resource-efficient data transfer and dynamic routing of vehicles), we point out approaches for using the existing infrastructure with a higher grade of efficiency. △ Less

Submitted 21 November, 2019; v1 submitted 10 January, 2019; originally announced January 2019.

Journal ref: 2019 IEEE International Systems Conference (SysCon)

Performance Evaluation and Optimization of B.A.T.M.A.N. V Routing for Aerial and Ground-based Mobile Ad-hoc Networks

Authors: Benjamin Sliwa, Stefan Falten, Christian Wietfeld

Abstract: The provision of reliable and efficient end-to-end communication within ground- and air-based mobile mesh networks is a major challenge for routing protocols due to the mobility-related dynamics of the channel properties and the resulting mesh network topology. In this paper, we evaluate the performance of the novel Better Approach To Mobile Adhoc Networking (B.A.T.M.A.N.) V routing protocol for v… ▽ More The provision of reliable and efficient end-to-end communication within ground- and air-based mobile mesh networks is a major challenge for routing protocols due to the mobility-related dynamics of the channel properties and the resulting mesh network topology. In this paper, we evaluate the performance of the novel Better Approach To Mobile Adhoc Networking (B.A.T.M.A.N.) V routing protocol for vehicular mesh networks and propose a mobility-predictive extension that explicitly addresses highly dynamic communication networks. In order to enable large-scale simulative analysis, we present an open source simulation model, which is validated by field experiments. Within a comprehensive evaluation campaign in Vehicle-to-Everything (V2X) and Unmanned Aerial Vehicle (UAV) scenarios, it is shown that the predictive B.A.T.M.A.N. V-based approach is significantly better suited for maintaining reliable connectivity within highly mobile mesh networks than established routing protocols. △ Less

Submitted 21 November, 2019; v1 submitted 8 January, 2019; originally announced January 2019.

Journal ref: 2019 IEEE 89th Vehicular Technology Conference (VTC2019-Spring)

Enabling Hard Service Guarantees in Software-Defined Smart Grid Infrastructures

Authors: Nils Dorsch, Fabian Kurtz, Christian Wietfeld

Abstract: Information and Communication Technology (ICT) infrastructures play a key role in the evolution from traditional power systems to Smart Grids. Increasingly fluctuating power flows, sparked by the transition towards sustainable energy generation, become a major issue for power grid stability. To deal with this challenge, future Smart Grids require precise monitoring and control, which in turn deman… ▽ More Information and Communication Technology (ICT) infrastructures play a key role in the evolution from traditional power systems to Smart Grids. Increasingly fluctuating power flows, sparked by the transition towards sustainable energy generation, become a major issue for power grid stability. To deal with this challenge, future Smart Grids require precise monitoring and control, which in turn demand for reliable, real-time capable and cost-efficient communications. For this purpose, we propose applying Software-Defined Networking (SDN) to handle the manifold requirements of Smart Grid communications. To achieve reliability, our approach encompasses fast recovery after failures in the communication network and dynamic service-aware network (re-)configuration. Network Calculus (NC) logic is embedded into our SDN controller for meeting latency requirements imposed by the standard IEC 61850 of the International Electrotechnical Committee (IEC). Thus, routing provides delay-optimal paths under consideration of existing cross traffic. Also, continuous latency bound compliance is ensured by combining NC delay supervision with means of flexible reconfiguration. For evaluation we consider the well-known Nordic 32 test system, on which we map a corresponding communication network in both experiment and emulation. The described functionalities are validated, employing realistic IEC 61850 transmissions and distributed control traffic. Our results show that hard service guarantees can be ensured with the help of the proposed SDN solution. On this basis, we derive extremely time critical services, which must not be subjected to flexible reconfiguration. △ Less

Submitted 18 October, 2018; originally announced October 2018.

Comments: 63 pages, 17 figures

Journal ref: Computer Networks, Volume 147, 24 December 2018, Pages 112-131

Exploiting Map Topology Knowledge for Context-predictive Multi-interface Car-to-cloud Communication

Authors: Benjamin Sliwa, Johannes Pillmann, Maximilian Klaß, Christian Wietfeld

Abstract: While the automotive industry is currently facing a contest among different communication technologies and paradigms about predominance in the connected vehicles sector, the diversity of the various application requirements makes it unlikely that a single technology will be able to fulfill all given demands. Instead, the joint usage of multiple communication technologies seems to be a promising ca… ▽ More While the automotive industry is currently facing a contest among different communication technologies and paradigms about predominance in the connected vehicles sector, the diversity of the various application requirements makes it unlikely that a single technology will be able to fulfill all given demands. Instead, the joint usage of multiple communication technologies seems to be a promising candidate that allows benefiting from characteristical strengths (e.g., using low latency direct communication for safety-related messaging). Consequently, dynamic network interface selection has become a field of scientific interest. In this paper, we present a cross-layer approach for context-aware transmission of vehicular sensor data that exploits mobility control knowledge for scheduling the transmission time with respect to the anticipated channel conditions for the corresponding communication technology. The proposed multi-interface transmission scheme is evaluated in a comprehensive simulation study, where it is able to achieve significant improvements in data rate and reliability. △ Less

Submitted 3 July, 2018; originally announced July 2018.

Journal ref: 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall)

Leveraging the Channel as a Sensor: Real-time Vehicle Classification Using Multidimensional Radio-fingerprinting

Authors: Benjamin Sliwa, Nico Piatkowski, Marcus Haferkamp, Dennis Dorn, Christian Wietfeld

Abstract: Upcoming Intelligent Transportation Systems (ITSs) will transform roads from static resources to dynamic Cyber Physical Systems (CPSs) in order to satisfy the requirements of future vehicular traffic in smart city environments. Up-to-date information serves as the basis for changing street directions as well as guiding individual vehicles to a fitting parking slot. In this context, not only abstra… ▽ More Upcoming Intelligent Transportation Systems (ITSs) will transform roads from static resources to dynamic Cyber Physical Systems (CPSs) in order to satisfy the requirements of future vehicular traffic in smart city environments. Up-to-date information serves as the basis for changing street directions as well as guiding individual vehicles to a fitting parking slot. In this context, not only abstract indicators like traffic flow and density are required, but also data about mobility parameters and class information of individual vehicles. Consequently, accurate and reliable systems that are capable of providing these kinds of information in real-time are highly demanded. In this paper, we present a system for classifying vehicles based on their radio-fingerprints which applies cutting-edge machine learning models and can be non-intrusively installed into the existing road infrastructure in an ad-hoc manner. In contrast to other approaches, it is able to provide accurate classification results without causing privacy-violations or being vulnerable to challenging weather conditions. Moreover, it is a promising candidate for large-scale city deployments due to its cost-efficient installation and maintenance properties. The proposed system is evaluated in a comprehensive field evaluation campaign within an experimental live deployment on a German highway, where it is able to achieve a binary classification success ratio of more than 99% and an overall accuracy of 89.15% for a fine-grained classification task with nine different classes. △ Less

Submitted 2 July, 2018; originally announced July 2018.

Journal ref: 2018 21st International Conference on Intelligent Transportation Systems (ITSC)

Performance Analysis of Unsupervised LTE Device-to-Device (D2D) Communication

Authors: Fabian Eckermann, Julian Freudenthal, Christian Wietfeld

Abstract: Cellular network technology based device-to-device communication attracts increasing attention for use cases such as the control of autonomous vehicles on the ground and in the air. LTE provides device-to-device communication options, however, the configuration options are manifold (leading to 150+ possible combinations) and therefore the ideal combination of parameters is hard to find. Depending… ▽ More Cellular network technology based device-to-device communication attracts increasing attention for use cases such as the control of autonomous vehicles on the ground and in the air. LTE provides device-to-device communication options, however, the configuration options are manifold (leading to 150+ possible combinations) and therefore the ideal combination of parameters is hard to find. Depending on the use case, either throughput, reliability or latency constraints may be the primary concern of the service provider. In this work we analyze the impact of different configuration settings of unsupervised LTE device-to-device (sidelink) communication on the system performance. Using a simulative approach we vary the length of the PSCCH period and the number of PSCCH subframes and determine the impact of different combinations of those parameters on the resulting latency, reliability and the interarrival times of the received packets. Furthermore we examine the system limitations by a scalability analysis. In this context, we propose a modified HARQ process to mitigate scalability constraints. Our results show that the proposed reduced HARQ retransmission probability can increase the system performance regarding latency and interarrival times as well as the packet transmission reliability for higher channel utilization. △ Less

Submitted 25 June, 2018; originally announced June 2018.

Machine Learning Based Uplink Transmission Power Prediction for LTE and Upcoming 5G Networks using Passive Downlink Indicators

Authors: Robert Falkenberg, Benjamin Sliwa, Nico Piatkowski, Christian Wietfeld

Abstract: Energy-aware system design is an important optimization task for static and mobile Internet of Things (IoT)-based sensor nodes, especially for highly resource-constrained vehicles such as mobile robotic systems. For 4G/5G-based cellular communication systems, the effective transmission power of uplink data transmissions is of crucial importance for the overall system power consumption. Unfortunate… ▽ More Energy-aware system design is an important optimization task for static and mobile Internet of Things (IoT)-based sensor nodes, especially for highly resource-constrained vehicles such as mobile robotic systems. For 4G/5G-based cellular communication systems, the effective transmission power of uplink data transmissions is of crucial importance for the overall system power consumption. Unfortunately, this information is usually hidden within off-the-shelf modems and mobile handsets and can therefore not be exploited for enabling green communication. Moreover, the dynamic transmission power control behavior of the mobile device is not even explicitly modeled in most of the established simulation frameworks. In this paper, we present a novel machine learning-based approach for forecasting the resulting uplink transmission power used for data transmissions based on the available passive network quality indicators and application-level information. The model is derived from comprehensive field measurements of drive tests performed in a public cellular network and can be parameterized for integrating all measurements a given target platform is able to provide into the prediction process. In a comparison of three different machine learning methods, Random-Forest models thoroughly performed best with a mean average error of 3.166 dB. As the absolute sum of errors converges towards zero and falls below 1 dB after 28 predictions in average, the approach is well-suited for long-term power estimations. △ Less

Submitted 19 February, 2020; v1 submitted 18 June, 2018; originally announced June 2018.

Journal ref: 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall)

Performance comparison of dynamic vehicle routing methods for minimizing the global dwell time in upcoming smart cities

Authors: Tim Vranken, Benjamin Sliwa, Christian Wietfeld, Michael Schreckenberg

Abstract: Traffic jams in urban scenarios are often caused by bottlenecks related to the street topology and road infrastructure, e.g. traffic lights and merging of lanes. Instead of addressing traffic flow optimization in a static way by extending the road capacity through constructing additional streets, upcoming smart cities will exploit the availability of modern communication technologies to dynamicall… ▽ More Traffic jams in urban scenarios are often caused by bottlenecks related to the street topology and road infrastructure, e.g. traffic lights and merging of lanes. Instead of addressing traffic flow optimization in a static way by extending the road capacity through constructing additional streets, upcoming smart cities will exploit the availability of modern communication technologies to dynamically change the mobility behavior of individual vehicles. The underlying overall goal is to minimize the total dwell time of the vehicles within the road network. In this paper, different bottleneck-aware methods for dynamic vehicle routing are compared in comprehensive simulations. As a realistic evaluation scenario, the inner city of Dusseldorf is modeled and the mobility behavior of the cars is represented based on real-world traffic flow data. The simulation results show, that the consideration of bottlenecks in a routing method decreased the average travel time by around 23%. Based on these results a new routing method is created which further reduces the average travel time by around 10%. The simulations further show, that the implementation of dynamic lanes in inner cities most of the time only shift traffic congestion to following bottlenecks without reducing the travel times. △ Less

Submitted 17 May, 2018; originally announced May 2018.

Journal ref: 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall)

Payload-size and Deadline-aware Scheduling for Upcoming 5G Networks: Experimental Validation in High-load Scenarios

Authors: Stefan Monhof, Marcus Haferkamp, Benjamin Sliwa, Christian Wietfeld

Abstract: High data rates, low latencies, and a widespread availability are the key properties why current cellular network technologies are used for many different applications. However, the coexistence of different data traffic types in the same 4G/5G-based public mobile network results in a significant growth of interfering data traffic competing for transmission. Particularly in the context of time-crit… ▽ More High data rates, low latencies, and a widespread availability are the key properties why current cellular network technologies are used for many different applications. However, the coexistence of different data traffic types in the same 4G/5G-based public mobile network results in a significant growth of interfering data traffic competing for transmission. Particularly in the context of time-critical and highly dynamic Cyber Physical Systems (CPS) and Vehicle-to-Everything (V2X) applications, the compliance with deadlines and therefore the efficient allocation of scarce mobile radio resources is of high importance. Hence, scheduling solutions are required offering a good trade-off between the compliance with deadlines and a spectrum-efficient allocation of resources in mobile networks. In this paper, we present the results of an experimental validation of the Payload-size and Deadline-aware (PayDA) scheduling algorithm using a Software-Defined Radio (SDR)-based eNodeB. The results of the experimental validation prove the high efficiency of the proposed PayDA scheduling algorithm for time-critical applications in both miscellaneous and homogeneous data traffic scenarios. △ Less

Submitted 26 June, 2018; v1 submitted 17 May, 2018; originally announced May 2018.

Machine learning based context-predictive car-to-cloud communication using multi-layer connectivity maps for upcoming 5G networks

Authors: Benjamin Sliwa, Thomas Liebig, Robert Falkenberg, Johannes Pillmann, Christian Wietfeld

Abstract: While cars were only considered as means of personal transportation for a long time, they are currently transcending to mobile sensor nodes that gather highly up-to-date information for crowdsensing-enabled big data services in a smart city context. Consequently, upcoming 5G communication networks will be confronted with massive increases in Machine-type Communication (MTC) and require resource-ef… ▽ More While cars were only considered as means of personal transportation for a long time, they are currently transcending to mobile sensor nodes that gather highly up-to-date information for crowdsensing-enabled big data services in a smart city context. Consequently, upcoming 5G communication networks will be confronted with massive increases in Machine-type Communication (MTC) and require resource-efficient transmission methods in order to optimize the overall system performance and provide interference-free coexistence with human data traffic that is using the same public cellular network. In this paper, we bring together mobility prediction and machine learning based channel quality estimation in order to improve the resource-efficiency of car-to-cloud data transfer by scheduling the transmission time of the sensor data with respect to the anticipated behavior of the communication context. In a comprehensive field evaluation campaign, we evaluate the proposed context-predictive approach in a public cellular network scenario where it is able to increase the average data rate by up to 194% while simultaneously reducing the mean uplink power consumption by up to 54%. △ Less

Submitted 23 June, 2018; v1 submitted 17 May, 2018; originally announced May 2018.

Journal ref: 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall)

The AutoMat CVIM - A Scalable Data Model for Automotive Big Data Marketplaces

Authors: Johannes Pillmann, Benjamin Sliwa, Christian Wietfeld

Abstract: In the past years, connectivity has been introduced in automotive production series, enabling vehicles as highly mobile Internet of Things sensors and participants. The Horizon 2020 research project AutoMat addressed this scenario by building a vehicle big data marketplace in order to leverage and exploit crowd-sourced sensor data, a so far unexcavated treasure. As part of this project the Common… ▽ More In the past years, connectivity has been introduced in automotive production series, enabling vehicles as highly mobile Internet of Things sensors and participants. The Horizon 2020 research project AutoMat addressed this scenario by building a vehicle big data marketplace in order to leverage and exploit crowd-sourced sensor data, a so far unexcavated treasure. As part of this project the Common Vehicle Information Model (CVIM) as harmonized data model has been developed. The CVIM allows a common understanding and generic representation, brand-independent throughout the whole data value and processing chain. The demonstrator consists of CVIM vehicle sensor data, which runs through the different components of the whole AutoMat vehicle big data processing pipeline. Finally, at the example of a traffic measurement service the data of a whole vehicle fleet is aggregated and evaluated. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Resource-efficient Transmission of Vehicular Sensor Data Using Context-aware Communication

Authors: Benjamin Sliwa, Thomas Liebig, Robert Falkenberg, Johannes Pillmann, Christian Wietfeld

Abstract: Upcoming Intelligent Traffic Control Systems (ITSCs) will base their optimization processes on crowdsensing data obtained for cars that are used as mobile sensor nodes. In conclusion, public cellular networks will be confronted with massive increases in Machine-Type Communication (MTC) and will require efficient communication schemes to minimize the interference of Internet of Things (IoT) data tr… ▽ More Upcoming Intelligent Traffic Control Systems (ITSCs) will base their optimization processes on crowdsensing data obtained for cars that are used as mobile sensor nodes. In conclusion, public cellular networks will be confronted with massive increases in Machine-Type Communication (MTC) and will require efficient communication schemes to minimize the interference of Internet of Things (IoT) data traffic with human communication. In this demonstration, we present an Open Source framework for context-aware transmission of vehicular sensor data that exploits knowledge about the characteristics of the transmission channel for leveraging connectivity hotspots, where data transmissions can be performed with a high grade if resource efficiency. At the conference, we will present the measurement application for acquisition and live-visualization of the required network quality indicators and show how the transmission scheme performs in real-world vehicular scenarios based on measurement data obtained from field experiments. △ Less

Submitted 16 April, 2018; originally announced April 2018.

Novel Common Vehicle Information Model (CVIM) for Future Automotive Vehicle Big Data Marketplaces

Authors: Johannes Pillmann, Christian Wietfeld, Adrian Zarcula, Thomas Raugust, Daniel Calvo Alonso

Abstract: Even though connectivity services have been introduced in many of the most recent car models, access to vehicle data is currently limited due to its proprietary nature. The European project AutoMat has therefore developed an open Marketplace providing a single point of access for brand-independent vehicle data. Thereby, vehicle sensor data can be leveraged for the design and implementation of enti… ▽ More Even though connectivity services have been introduced in many of the most recent car models, access to vehicle data is currently limited due to its proprietary nature. The European project AutoMat has therefore developed an open Marketplace providing a single point of access for brand-independent vehicle data. Thereby, vehicle sensor data can be leveraged for the design and implementation of entirely new services even beyond trafficrelated applications (such as hyper-local traffic forecasts). This paper presents the architecture for a Vehicle Big Data Marketplace as enabler of cross-sectorial and innovative vehicle data services. Therefore, the novel Common Vehicle Information Model (CVIM) is defined as an open and harmonized data model, allowing the aggregation of brand-independent and generic data sets. Within this work the realization of a prototype CVIM and Marketplace implementation is presented. The two use-cases of local weather prediction and road quality measurements are introduced to show the applicability of the AutoMat concept and prototype to non-automotive application △ Less

Submitted 21 February, 2018; originally announced February 2018.

Journal ref: Intelligent Vehicles Symposium (IV), 2017 IEEE

tinyLTE: Lightweight, Ad-Hoc Deployable Cellular Network for Vehicular Communication

Authors: Fabian Eckermann, Philipp Gorczak, Christian Wietfeld

Abstract: The application of LTE technology has evolved from infrastructure-based deployments in licensed bands to new use cases covering ad hoc, device-to-device communications and unlicensed band operation. Vehicular communication is an emerging field of particular interest for LTE, covering in our understanding both automotive (cars) as well as unmanned aerial vehicles. Existing commercial equipment is d… ▽ More The application of LTE technology has evolved from infrastructure-based deployments in licensed bands to new use cases covering ad hoc, device-to-device communications and unlicensed band operation. Vehicular communication is an emerging field of particular interest for LTE, covering in our understanding both automotive (cars) as well as unmanned aerial vehicles. Existing commercial equipment is designed for infrastructure making it unsuitable for vehicular applications requiring low weight and unlicensed band support (e.g. 5.9 GHz ITS-band). In this work, we present tinyLTE, a system design which provides fully autonomous, multi-purpose and ultra-compact LTE cells by utilizing existing open source eNB and EPC implementations. Due to its small form factor and low weight, the tinyLTE system enables mobile deployment on board of cars and drones as well as smooth integration with existing roadside infrastructure. Additionally, the standalone design allows for systems to be chained in a multi-hop configuration. The paper describes the lean and low-cost design concept and implementation followed by a performance evaluation for single and two-hop configurations at 5.9 GHz. The results from both lab and field experiments validate the feasibility of the tinyLTE approach and demonstrate its potential to even support real-time vehicular applications (e.g. with a lowest average end-to-end latency of around 7 ms in the lab experiment). △ Less

Submitted 26 February, 2018; originally announced February 2018.

Journal ref: 2018 IEEE 87th Vehicular Technology Conference (VTC Spring)

Empirical evaluation of predictive channel-aware transmission for resource efficient car-to-cloud communication

Authors: Johannes Pillmann, Benjamin Sliwa, Christian Kastin, Christian Wietfeld

Abstract: Nowadays vehicles are by default equipped with communication hardware. This enables new possibilities of connected services, like vehicles serving as highly mobile sensor platforms in the Internet of Things (IoT) context. Hereby, cars need to upload and transfer their data via a mobile communication network into the cloud for further evaluation. As wireless resources are limited and shared by all… ▽ More Nowadays vehicles are by default equipped with communication hardware. This enables new possibilities of connected services, like vehicles serving as highly mobile sensor platforms in the Internet of Things (IoT) context. Hereby, cars need to upload and transfer their data via a mobile communication network into the cloud for further evaluation. As wireless resources are limited and shared by all users, data transfers need to be conducted efficiently. Within the scope of this work three car-to-cloud data transmission algorithms Channel-Aware Transmission (CAT), predictive CAT (pCAT) and a periodic scheme are evaluated in an empirical setup. CAT leverages channel quality measurements to start data uploads preferably when the channel quality is good. CAT's extension pCAT uses past measurements in addition to estimate future channel conditions. For the empirical evaluation, a research vehicle was equipped with a measurement platform. On test drives along a reference route vehicle sensor data was collected and subsequently uploaded to a cloud server via a Long Term Evolution (LTE) network. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Journal ref: Vehicular Networking Conference (VNC), 2017 IEEE

Car-to-Cloud Communication Traffic Analysis Based on the Common Vehicle Information Model

Authors: Johannes Pillmann, Benjamin Sliwa, Jens Schmutzler, Christoph Ide, Christian Wietfeld

Abstract: Although connectivity services have been introduced already today in many of the most recent car models, the potential of vehicles serving as highly mobile sensor platform in the Internet of Things (IoT) has not been sufficiently exploited yet. The European AutoMat project has therefore defined an open Common Vehicle Information Model (CVIM) in combination with a cross-industry, cloud-based big da… ▽ More Although connectivity services have been introduced already today in many of the most recent car models, the potential of vehicles serving as highly mobile sensor platform in the Internet of Things (IoT) has not been sufficiently exploited yet. The European AutoMat project has therefore defined an open Common Vehicle Information Model (CVIM) in combination with a cross-industry, cloud-based big data marketplace. Thereby, vehicle sensor data can be leveraged for the design of entirely new services even beyond traffic-related applications (such as localized weather forecasts). This paper focuses on the prediction of the achievable data rate making use of an analytical model based on empirical measurements. For an in-depth analysis, the CVIM has been integrated in a vehicle traffic simulator to produce CVIM-complaint data streams as a result of the individual behavior of each vehicle (speed, brake activity, steering activity, etc.). In a next step, a simulation of vehicle traffic in a realistically modeled, large-area street network has been used in combination with a cellular Long Term Evolution (LTE) network to determine the cumulated amount of data produced within each network cell. As a result, a new car-to-cloud communication traffic model has been derived, which quantifies the data rate of aggregated car-to-cloud data producible by vehicles depending on the current traffic situations (free flow and traffic jam). The results provide a reference for network planning and resource scheduling for car-to-cloud type services in the context of smart cities. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Journal ref: Vehicular Technology Conference (VTC Spring), 2017 IEEE 85th

System-in-the-loop Design Space Exploration for Efficient Communication in Large-scale IoT-based Warehouse Systems

Authors: Robert Falkenberg, Jens Drenhaus, Benjamin Sliwa, Christian Wietfeld

Abstract: Instead of treating inventory items as static resources, future intelligent warehouses will transcend containers to Cyber Physical Systems (CPS) that actively and autonomously participate in the optimization of the logistical processes. Consequently, new challenges that are system-immanent for the massive Internet of Things (IoT) context, such as channel access in a shared communication medium, ha… ▽ More Instead of treating inventory items as static resources, future intelligent warehouses will transcend containers to Cyber Physical Systems (CPS) that actively and autonomously participate in the optimization of the logistical processes. Consequently, new challenges that are system-immanent for the massive Internet of Things (IoT) context, such as channel access in a shared communication medium, have to be addressed. In this paper, we present a multi-methodological system model that brings together testbed experiments for measuring real hardware properties and simulative evaluations for large-scale considerations. As an example case study, we will particularly focus on parametrization of the 802.15.4-based radio communication system, which has to be energy-efficient due to scarce amount of harvested energy, but avoid latencies for the maintenance of scalability of the overlaying warehouse system. The results show, that a modification of the initial backoff time can lead to both, energy and time savings in the order of 50% compared to the standard. △ Less

Submitted 12 June, 2018; v1 submitted 8 February, 2018; originally announced February 2018.

Journal ref: 2018 Annual IEEE International Systems Conference (SysCon)

Radio-based Traffic Flow Detection and Vehicle Classification for Future Smart Cities

Authors: Marcus Haferkamp, Manar Al-Askary, Dennis Dorn, Benjamin Sliwa, Lars Habel, Michael Schreckenberg, Christian Wietfeld

Abstract: Intelligent Transportation Systems (ITSs) providing vehicle-related statistical data are one of the key components for future smart cities. In this context, knowledge about the current traffic flow is used for travel time reduction and proactive jam avoidance by intelligent traffic control mechanisms. In addition, the monitoring and classification of vehicles can be used in the field of smart park… ▽ More Intelligent Transportation Systems (ITSs) providing vehicle-related statistical data are one of the key components for future smart cities. In this context, knowledge about the current traffic flow is used for travel time reduction and proactive jam avoidance by intelligent traffic control mechanisms. In addition, the monitoring and classification of vehicles can be used in the field of smart parking systems. The required data is measured using networks with a wide range of sensors. Nevertheless, in the context of smart cities no existing solution for traffic flow detection and vehicle classification is able to guarantee high classification accuracy, low deployment and maintenance costs, low power consumption and a weather-independent operation while respecting privacy. In this paper, we propose a radiobased approach for traffic flow detection and vehicle classification using signal attenuation measurements and machine learning algorithms. The results of comprehensive measurements in the field prove its high classification success rate of about 99%. △ Less

Submitted 21 February, 2018; v1 submitted 10 January, 2018; originally announced January 2018.

Journal ref: Vehicular Technology Conference (VTC Spring), 2017 IEEE 85th