Showing 1–13 of 13 results for author: Wiemer, S

Locating clustered seismicity using Distance Geometry Solvers: applications for sparse and single-borehole DAS networks

Authors: Katinka Tuinstra, Francesco Grigoli, Federica Lanza, Antonio Pio Rinaldi, Andreas Fichtner, Stefan Wiemer

Abstract: The determination of seismic event locations with sparse networks or single-borehole systems remains a significant challenge in observational seismology. Leveraging the advantages of the location approach HADES, which was initially developed for locating clustered seismicity recorded at two stations, we present here an improved version of the methodology: HADES-R. Where HADES previously needed a m… ▽ More The determination of seismic event locations with sparse networks or single-borehole systems remains a significant challenge in observational seismology. Leveraging the advantages of the location approach HADES, which was initially developed for locating clustered seismicity recorded at two stations, we present here an improved version of the methodology: HADES-R. Where HADES previously needed a minimum of 4 absolutely located master events, HADES-R solves a least-squares problem to find the relative inter-event distances in the cluster, and uses only a single master event to find the locations of all events, and subsequently applies rotational optimiser to find the cluster orientation. It can leverage iterative station combinations if multiple receivers are available, to describe the cluster shape and orientation uncertainty with a bootstrap approach. The improved method requires P- and S-phase arrival picks, a homogeneous velocity model, a single master event with a known location, and an estimate of the cluster width. The approach is benchmarked on the 2019 Ridgecrest sequence recorded at two stations, and applied to two seismic clusters at the FORGE geothermal test site, including a microseismic monitoring scenario with a DAS in a vertical borehole. Traditional procedures struggle in these settings due to the ill-posed network configuration. The azimuthal ambiguity in this scenario is partially overcome by assuming that all events belong to the same cluster around the master event and a cluster width estimate. We find the cluster shape in both cases, although the orientation remains uncertain. The method's ability to constrain the cluster shape and location with only one well-located event offers promising implications, especially for environments where limited or specialised instrumentation is in use. △ Less

Submitted 2 July, 2024; v1 submitted 28 September, 2023; originally announced September 2023.

Comments: This is a pre-copyedited, author-produced version of an article accepted for publication in Geophysical Journal International following peer review. The version of record is available online at: https://academic.oup.com/gji/article/238/2/661/7670630

Question-driven ensembles of flexible ETAS models

Authors: Leila Mizrahi, Shyam Nandan, William Savran, Stefan Wiemer, Yehuda Ben-Zion

Abstract: The development of new earthquake forecasting models is often motivated by one of the following complementary goals: to gain new insights into the governing physics and to produce improved forecasts quantified by objective metrics. Often, one comes at the cost of the other. Here, we propose a question-driven ensemble (QDE) modeling approach to address both goals. We first describe flexible ETAS mo… ▽ More The development of new earthquake forecasting models is often motivated by one of the following complementary goals: to gain new insights into the governing physics and to produce improved forecasts quantified by objective metrics. Often, one comes at the cost of the other. Here, we propose a question-driven ensemble (QDE) modeling approach to address both goals. We first describe flexible ETAS models in which we relax the assumptions of parametrically defined aftershock productivity and background earthquake rates during model calibration. Instead, both productivity and background rates are calibrated with data such that their variability is optimally represented by the model. Then we consider 64 QDE models in pseudo-prospective forecasting experiments for Southern California and Italy. QDE models are constructed by combining model parameters of different ingredient models, where the rules for how to combine parameters are defined by questions about the future seismicity. The QDE models can be interpreted as models which address different questions with different ingredient models. We find that certain models best address the same issues in both regions, and that QDE models can substantially outperform the standard ETAS and all ingredient models. The best performing QDE model is obtained through the combination of models allowing flexible background seismicity and flexible aftershock productivity, respectively, where the former parameterizes the spatial distribution of background earthquakes and the partitioning of seismicity into background events and aftershocks, and the latter is used to parameterize the spatio-temporal occurrence of aftershocks. △ Less

Submitted 16 December, 2022; v1 submitted 13 July, 2022; originally announced July 2022.

Embracing Data Incompleteness for Better Earthquake Forecasting

Authors: Leila Mizrahi, Shyam Nandan, Stefan Wiemer

Abstract: We propose two methods to calibrate the parameters of the epidemic-type aftershock sequence (ETAS) model based on expectation maximization (EM) while accounting for temporal variation of catalog completeness. The first method allows for model calibration on long-term earthquake catalogs with temporal variation of the completeness magnitude, $m_c$. This calibration technique is beneficial for long-… ▽ More We propose two methods to calibrate the parameters of the epidemic-type aftershock sequence (ETAS) model based on expectation maximization (EM) while accounting for temporal variation of catalog completeness. The first method allows for model calibration on long-term earthquake catalogs with temporal variation of the completeness magnitude, $m_c$. This calibration technique is beneficial for long-term probabilistic seismic hazard assessment (PSHA), which is often based on a mixture of instrumental and historical catalogs. The second method generalizes the concept of $m_c$, considering rate- and magnitude-dependent detection probability, and allows for self-consistent estimation of ETAS parameters and high-frequency detection incompleteness. With this approach, we aim to address the potential biases in parameter calibration due to short-term aftershock incompleteness, embracing incompleteness instead of avoiding it. Using synthetic tests, we show that both methods can accurately invert the parameters of simulated catalogs. We then use them to estimate ETAS parameters for California using the earthquake catalog since 1932. To explore how model calibration, inclusion of small events, and accounting for short-term incompleteness affect earthquakes' predictability, we systematically compare variants of ETAS models based on the second approach in pseudo-prospective forecasting experiments for California. Our proposed model significantly outperforms the ETAS null model, with decreasing information gain for increasing target magnitude threshold. We find that the ability to include small earthquakes for simulation of future scenarios is the primary driver of the improvement and that accounting for incompleteness is necessary. Our results have significant implications for our understanding of earthquake interaction mechanisms and the future of seismicity forecasting. △ Less

Submitted 1 December, 2021; v1 submitted 3 May, 2021; originally announced May 2021.

The Effect of Declustering on the Size Distribution of Mainshocks

Authors: Leila Mizrahi, Shyam Nandan, Stefan Wiemer

Abstract: Declustering aims to divide earthquake catalogs into independent events (mainshocks), and dependent (clustered) events, and is an integral component of many seismicity studies, including seismic hazard assessment. We assess the effect of declustering on the frequency-magnitude distribution of mainshocks. In particular, we examine the dependence of the b-value of declustered catalogs on the choice… ▽ More Declustering aims to divide earthquake catalogs into independent events (mainshocks), and dependent (clustered) events, and is an integral component of many seismicity studies, including seismic hazard assessment. We assess the effect of declustering on the frequency-magnitude distribution of mainshocks. In particular, we examine the dependence of the b-value of declustered catalogs on the choice of declustering approach and algorithm-specific parameters. Using the catalog of earthquakes in California since 1980, we show that the b-value decreases by up to 30% due to declustering with respect to the undeclustered catalog. The extent of the reduction is highly dependent on the declustering method and parameters applied. We then reproduce a similar effect by declustering synthetic earthquake catalogs with known b-value, which have been generated using an Epidemic-Type Aftershock Sequence (ETAS) model. Our analysis suggests that the observed decrease in b-value must, at least partially, arise from the application of the declustering algorithm on the catalog, rather than from differences in the nature of mainshocks versus fore- or aftershocks. We conclude that declustering should be considered as a potential source of bias in seismicity and hazard studies. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Forecasting the full distribution of earthquake numbers is fair, robust and better

Authors: Shyam Nandan, Guy Ouillon, Didier Sornette, Stefan Wiemer

Abstract: Forecasting the full distribution of the number of earthquakes is revealed to be inherently superior to forecasting their mean. Forecasting the full distribution of earthquake numbers is also shown to yield robust projections in the presence of "surprise" large earthquakes, which in the past have strongly deteriorated the scores of existing models. We show this with pseudo-prospective experiments… ▽ More Forecasting the full distribution of the number of earthquakes is revealed to be inherently superior to forecasting their mean. Forecasting the full distribution of earthquake numbers is also shown to yield robust projections in the presence of "surprise" large earthquakes, which in the past have strongly deteriorated the scores of existing models. We show this with pseudo-prospective experiments on synthetic as well as real data from the Advanced National Seismic System (ANSS) database for California, with earthquakes with magnitude larger than 2.95 that occurred between the period 1971-2016. Our results call in question the testing methodology of the Collaboratory for the study of earthquake predictability (CSEP), which amounts to assuming a Poisson distribution of earthquake numbers, which is known to be a poor representation of the heavy-tailed distribution of earthquake numbers. Using a spatially varying ETAS model, we demonstrate a remarkable stability of the forecasting performance, when using the full distribution of earthquake numbers for the forecasts, even in the presence of large earthquakes such as Mw 7.1 Hector Mine, Mw 7.2 El Mayor-Cucapah, Mw 6.6 Sam Simeon earthquakes, or in the presence of intense swarm activity in Northwest Nevada in 2014. While our results have been derived for ETAS type models, we propose that all earthquake forecasting models of any type should embrace the full distribution of earthquake numbers, such that their true forecasting potential is revealed. △ Less

Submitted 17 March, 2019; originally announced March 2019.

Forecasting the rates of future aftershocks of all generations is essential to develop better earthquake forecast models

Authors: Shyam Nandan, Guy Ouillon, Didier Sornette, Stefan Wiemer

Abstract: Currently, one of the best performing and most popular earthquake forecasting models rely on the working hypothesis that: "locations of past background earthquakes reveal the probable location of future seismicity". As an alternative, we present a class of smoothed seismicity models (SSMs) based on the principles of the Epidemic Type Aftershock Sequence (ETAS) model, which forecast the location, t… ▽ More Currently, one of the best performing and most popular earthquake forecasting models rely on the working hypothesis that: "locations of past background earthquakes reveal the probable location of future seismicity". As an alternative, we present a class of smoothed seismicity models (SSMs) based on the principles of the Epidemic Type Aftershock Sequence (ETAS) model, which forecast the location, time and magnitude of all future earthquakes using the estimates of the background seismicity rate and the rates of future aftershocks of all generations. Using the Californian earthquake catalog, we formulate six controlled pseudo-prospective experiments with different combination of three target magnitude thresholds: 2.95, 3.95 or 4.95 and two forecasting time horizons: 1 or 5 year. In these experiments, we compare the performance of:(1) ETAS model with spatially homogenous parameters or GETAS (2) ETAS model with spatially variable parameters or SVETAS (3) three declustering based SSMs (4) a simple SSM based on undeclustered data and (5) a model based on strain rate data, in forecasting the location and magnitude of all (undeclustered) target earthquakes during many testing periods. In all conducted experiments, the SVETAS model comes out with consistent superiority compared to all the competing models. Consistently better performance of SVETAS model with respect to declustering based SSMs highlights the importance of forecasting the future aftershocks of all generations for develo** better earthquake forecasting models. Among the two ETAS models themselves, accounting for the optimal spatial variation of the parameters leads to strong and statistically significant improvements in forecasting performance. △ Less

Submitted 17 March, 2019; originally announced March 2019.

Autonomous decision-making against induced seismicity in deep fluid injections

Authors: Arnaud Mignan, Marco Broccardo, Stefan Wiemer, Domenico Giardini

Abstract: The rise in the frequency of anthropogenic earthquakes due to deep fluid injections is posing serious economic, societal, and legal challenges to geo-energy and waste-disposal projects. We propose an actuarial approach to mitigate this risk, first by defining an autonomous decision-making process based on an adaptive traffic light system (ATLS) to stop risky injections, and second by quantifying a… ▽ More The rise in the frequency of anthropogenic earthquakes due to deep fluid injections is posing serious economic, societal, and legal challenges to geo-energy and waste-disposal projects. We propose an actuarial approach to mitigate this risk, first by defining an autonomous decision-making process based on an adaptive traffic light system (ATLS) to stop risky injections, and second by quantifying a "cost of public safety" based on the probability of an injection-well being abandoned. The ATLS underlying statistical model is first confirmed to be representative of injection-induced seismicity, with examples taken from past reservoir stimulation experiments (mostly from Enhanced Geothermal Systems, EGS). Then the decision strategy is formalized: Being integrable, the model yields a closed-form ATLS solution that maps a risk-based safety standard or norm to an earthquake magnitude not to exceed during stimulation. Finally, the EGS levelized cost of electricity (LCOE) is reformulated in terms of null expectation, with the cost of abandoned injection-well implemented. We find that the price increase to mitigate the increased seismic risk in populated areas can counterbalance the heat credit. However this "public safety cost" disappears if buildings are based on earthquake-resistant designs or if a more relaxed risk safety standard or norm is chosen. △ Less

Submitted 22 March, 2018; originally announced March 2018.

Comments: 8 pages, 4 figures, conference (International Symposium on Energy Geotechnics, 26-28 September 2018, Lausanne, Switzerland)

Journal ref: Energy Geotechnics, A. Ferrari and L. Laloui (Eds.), SEG 2018, SSGG, pp. 369-376, 2019

Hierarchical Bayesian modeling of fluid-induced seismicity

Authors: Marco Broccardo, Arnaud Mignan, Stefan Wiemer, Bozidar Stojadinovic, Domenico Giardini

Abstract: In this study, we present a Bayesian hierarchical framework to model fluid-induced seismicity. The framework is based on a non-homogeneous Poisson process (NHPP) with a fluid-induced seismicity rate proportional to the rate of injected fluid. The fluid-induced seismicity rate model depends upon a set of physically meaningful parameters, and has been validated for six fluid-induced case studies. In… ▽ More In this study, we present a Bayesian hierarchical framework to model fluid-induced seismicity. The framework is based on a non-homogeneous Poisson process (NHPP) with a fluid-induced seismicity rate proportional to the rate of injected fluid. The fluid-induced seismicity rate model depends upon a set of physically meaningful parameters, and has been validated for six fluid-induced case studies. In line with the vision of hierarchical Bayesian modeling, the rate parameters are considered as random variables. We develop both the Bayesian inference and updating rules, which are used to develop a probabilistic forecasting model. We tested the Basel 2006 fluid-induced seismic case study to prove that the hierarchical Bayesian model offers a suitable framework to coherently encode both epistemic uncertainty and aleatory variability. Moreover, it provides a robust and consistent short-term seismic forecasting model suitable for online risk quantification and mitigation. △ Less

Submitted 24 November, 2017; originally announced November 2017.

Comments: 20 pages, 4 figures, Geophysical Research Letters 2017

Objective Estimation of Spatially Variable Parameters of Epidemic Type Aftershock Sequence Model: Application to California

Authors: Shyam Nandan, Guy Ouillon, Stefan Wiemer, Didier Sornette

Abstract: The ETAS model is widely employed to model the spatio-temporal distribution of earthquakes, generally using spatially invariant parameters. We propose an efficient method for the estimation of spatially varying parameters, using the Expectation-Maximization (EM) algorithm and spatial Voronoi tessellation ensembles. We use the Bayesian Information Criterion (BIC) to rank inverted models given their… ▽ More The ETAS model is widely employed to model the spatio-temporal distribution of earthquakes, generally using spatially invariant parameters. We propose an efficient method for the estimation of spatially varying parameters, using the Expectation-Maximization (EM) algorithm and spatial Voronoi tessellation ensembles. We use the Bayesian Information Criterion (BIC) to rank inverted models given their likelihood and complexity and select the best models to finally compute an ensemble model at any location. Using a synthetic catalog, we also check that the proposed method correctly inverts the known parameters. We apply the proposed method to earthquakes included in the ANSS catalog that occurred within the time period 1981-2015 in a spatial polygon around California. The results indicate a significant spatial variation of the ETAS parameters. We find that the efficiency of earthquakes to trigger future ones (quantified by the branching ratio) positively correlates with surface heat flow. In contrast, the rate of earthquakes triggered by far-field tectonic loading or background seismicity rate shows no such correlation, suggesting the relevance of triggering possibly through fluid-induced activation. Furthermore, the branching ratio and background seismicity rate are found to be uncorrelated with hypocentral depths, indicating that the seismic coupling remains invariant of hypocentral depths in the study region. Additionally, triggering seems to be mostly dominated by small earthquakes. Consequently, the static stress change studies should not only focus on the Coulomb stress changes caused by specific moderate to large earthquakes but also account for the secondary static stress changes caused by smaller earthquakes. △ Less

Submitted 27 June, 2017; originally announced June 2017.

Validating induced seismicity forecast models - Induced Seismicity Test Bench

Authors: Eszter Kiraly-Proag, J. Douglas Zechar, Valentin Gischig, Stefan Wiemer, Dimitrios Karvounis, Joseph Doetsch

Abstract: Induced earthquakes often accompany fluid injection, and the seismic hazard they pose threatens various underground engineering projects. Models to monitor and control induced seismic hazard with traffic light systems should be probabilistic, forward-looking, and updated as new data arrive. In this study, we propose an Induced Seismicity Test Bench to test and rank such models; this test bench can… ▽ More Induced earthquakes often accompany fluid injection, and the seismic hazard they pose threatens various underground engineering projects. Models to monitor and control induced seismic hazard with traffic light systems should be probabilistic, forward-looking, and updated as new data arrive. In this study, we propose an Induced Seismicity Test Bench to test and rank such models; this test bench can be used for model development, model selection, and ensemble model building. We apply the test bench to data from the Basel 2006 and Soultz-sous-Forêts 2004 geothermal stimulation projects, and we assess forecasts from two models: Shapiro and Smoothed Seismicity (SaSS) and Hydraulics and Seismics (HySei). These models incorporate a different mix of physics-based elements and stochastic representation of the induced sequences. Our results show that neither model is fully superior to the other. Generally, HySei forecasts the seismicity rate better after shut-in, but is only mediocre at forecasting the spatial distribution. On the other hand, SaSS forecasts the spatial distribution better and gives better seismicity rate estimates before shut-in. The shut-in phase is a difficult moment for both models in both reservoirs: the models tend to underpredict the seismicity rate around, and shortly after, shut-in. △ Less

Submitted 9 September, 2016; originally announced September 2016.

Comments: http://onlinelibrary.wiley.com/doi/10.1002/2016JB013236/abstract

Systematic Assessment of the Static Stress-Triggering Hypothesis using Inter-earthquake Time Statistics

Authors: Shyam Nandan, Guy Ouillon, Jochen Woessner, Didier Sornette, Stefan Wiemer

Abstract: A likely source of earthquake clustering is static stress transfer between individual events. Previous attempts to quantify the role of static stress for earthquake triggering generally considered only the stress changes caused by large events, and often discarded data uncertainties. We conducted a robust two-fold empirical test of the static stress change hypothesis by accounting for all events o… ▽ More A likely source of earthquake clustering is static stress transfer between individual events. Previous attempts to quantify the role of static stress for earthquake triggering generally considered only the stress changes caused by large events, and often discarded data uncertainties. We conducted a robust two-fold empirical test of the static stress change hypothesis by accounting for all events of magnitude M>=2.5 and their location and focal mechanism uncertainties provided by catalogs for Southern California between 1981 and 2010, first after resolving the focal plane ambiguity and second after randomly choosing one of the two nodal planes. For both cases, we find compelling evidence supporting the static triggering with stronger evidence after resolving the focal plane ambiguity above significantly small (about 10 Pa) but consistently observed stress thresholds. The evidence for the static triggering hypothesis is robust with respect to the choice of the friction coefficient, Skempton's coefficient and magnitude threshold. Weak correlations between the Coulomb Index (fraction of earthquakes that received positive Coulomb stress change) and the coefficient of friction indicate that the role of normal stress in triggering is rather limited. Last but not the least, we determined that the characteristic time for the loss of the stress change memory of a single event is nearly independent of the amplitude of the Coulomb stress change and varies between ~95 and ~180 days implying that forecasts based on static stress changes will have poor predictive skills beyond times that are larger than a few hundred days on average. △ Less

Submitted 28 February, 2016; originally announced February 2016.

Adaptively Smoothed Seismicity Earthquake Forecasts for Italy

Authors: M. J. Werner, A. Helmstetter, D. D. Jackson, Y. Y. Kagan, S. Wiemer

Abstract: We present a model for estimating the probabilities of future earthquakes of magnitudes m > 4.95 in Italy. The model, a slightly modified version of the one proposed for California by Helmstetter et al. (2007) and Werner et al. (2010), approximates seismicity by a spatially heterogeneous, temporally homogeneous Poisson point process. The temporal, spatial and magnitude dimensions are entirely deco… ▽ More We present a model for estimating the probabilities of future earthquakes of magnitudes m > 4.95 in Italy. The model, a slightly modified version of the one proposed for California by Helmstetter et al. (2007) and Werner et al. (2010), approximates seismicity by a spatially heterogeneous, temporally homogeneous Poisson point process. The temporal, spatial and magnitude dimensions are entirely decoupled. Magnitudes are independently and identically distributed according to a tapered Gutenberg-Richter magnitude distribution. We estimated the spatial distribution of future seismicity by smoothing the locations of past earthquakes listed in two Italian catalogs: a short instrumental catalog and a longer instrumental and historical catalog. The bandwidth of the adaptive spatial kernel is estimated by optimizing the predictive power of the kernel estimate of the spatial earthquake density in retrospective forecasts. When available and trustworthy, we used small earthquakes m>2.95 to illuminate active fault structures and likely future epicenters. By calibrating the model on two catalogs of different duration to create two forecasts, we intend to quantify the loss (or gain) of predictability incurred when only a short but recent data record is available. Both forecasts, scaled to five and ten years, were submitted to the Italian prospective forecasting experiment of the global Collaboratory for the Study of Earthquake Predictability (CSEP). An earlier forecast from the model was submitted by Helmstetter et al. (2007) to the Regional Earthquake Likelihood Model (RELM) experiment in California, and, with over half of the five-year experiment over, the forecast performs better than its competitors. △ Less

Submitted 28 June, 2010; v1 submitted 23 March, 2010; originally announced March 2010.

Comments: revised manuscript. 22 pages, 3 figures, 2 tables

Journal ref: Annals of Geophysics, 53(3), 107-116, 2010

Retrospective Evaluation of the Five-Year and Ten-Year CSEP-Italy Earthquake Forecasts

Authors: M. J. Werner, J. D. Zechar, W. Marzocchi, S. Wiemer

Abstract: On 1 August 2009, the global Collaboratory for the Study of Earthquake Predictability (CSEP) launched a prospective and comparative earthquake predictability experiment in Italy. The goal of the CSEP-Italy experiment is to test earthquake occurrence hypotheses that have been formalized as probabilistic earthquake forecasts over temporal scales that range from days to years. In the first round of f… ▽ More On 1 August 2009, the global Collaboratory for the Study of Earthquake Predictability (CSEP) launched a prospective and comparative earthquake predictability experiment in Italy. The goal of the CSEP-Italy experiment is to test earthquake occurrence hypotheses that have been formalized as probabilistic earthquake forecasts over temporal scales that range from days to years. In the first round of forecast submissions, members of the CSEP-Italy Working Group presented eighteen five-year and ten-year earthquake forecasts to the European CSEP Testing Center at ETH Zurich. We considered the twelve time-independent earthquake forecasts among this set and evaluated them with respect to past seismicity data from two Italian earthquake catalogs. In this article, we present the results of tests that measure the consistency of the forecasts with the past observations. Besides being an evaluation of the submitted time-independent forecasts, this exercise provided insight into a number of important issues in predictability experiments with regard to the specification of the forecasts, the performance of the tests, and the trade-off between the robustness of results and experiment duration. We conclude with suggestions for the future design of earthquake predictability experiments. △ Less

Submitted 22 July, 2010; v1 submitted 4 March, 2010; originally announced March 2010.

Comments: 43 pages, 8 figures, 4 tables