-
Power handling in a highly-radiative negative triangularity pilot plant
Authors:
M. A. Miller,
D. Arnold,
M. Wigram,
A. O. Nelson,
J. Witham,
G. Rutherford,
H. Choudhury,
C. Cummings,
C. Paz-Soldan,
D. G. Whyte
Abstract:
This work explores power handling solutions for high-field, highly-radiative negative triangularity (NT) reactors based around the MANTA concept \cite{rutherford_manta_2024}. The divertor design is kept as simple as possible, opting for a standard divertor with standard leg length. FreeGS is used to create an equilibrium for the boundary region, prioritizing a short outer leg length of only…
▽ More
This work explores power handling solutions for high-field, highly-radiative negative triangularity (NT) reactors based around the MANTA concept \cite{rutherford_manta_2024}. The divertor design is kept as simple as possible, opting for a standard divertor with standard leg length. FreeGS is used to create an equilibrium for the boundary region, prioritizing a short outer leg length of only $\sim$50 cm ($\sim$40\% of the minor radius). The UEDGE code package is used for the boundary plasma solution, to track plasma temperatures and fluxes to the divertor targets. It is found that for $P_\mathrm{SOL}$ = 25 MW and $n_\mathrm{sep} = 0.96 \times 10^{20}$ m$^{-3}$, conditions consistent with initial core transport modeling, little additional power mitigation is necessary. For external impurity injection of just 0.13\% Ne, the peak heat flux density at the more heavily loaded outer targets falls to 7.8 MW/m$^{2}$, while the electron temperature $T_\mathrm{e}$ remains just under 5 eV. Scans around the parameter space reveal that even at densities lower than in the primary operating scenario, $P_\mathrm{SOL}$ can be increased up to 50 MW, so long as a slightly higher fraction of extrinsic radiator is used. With less than 1\% neon (Ne) impurity content, the divertor still experiences less than 10 MW/m$^{2}$ at the outer target. Design of the plasma-facing components includes a close-fitting vacuum vessel with a tungsten inner surface as well as FLiBe-carrying cooling channels fashioned into the VV wall directly behind the divertor targets. For the seeded heat flux profile, Ansys Fluent heat transfer simulations estimate that the outer target temperature remains at just below 1550\degree C. Initial sco** of advanced divertor designs shows that for an X-divertor, detachment of the outer target becomes much simpler, and plasma fluxes to the targets drop considerably with only 0.01\% Ne content.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
MANTA: A Negative-Triangularity NASEM-Compliant Fusion Pilot Plant
Authors:
MANTA Collaboration,
G. Rutherford,
H. S. Wilson,
A. Saltzman,
D. Arnold,
J. L. Ball,
S. Benjamin,
R. Bielajew,
N. de Boucaud,
M. Calvo-Carrera,
R. Chandra,
H. Choudhury,
C. Cummings,
L. Corsaro,
N. DaSilva,
R. Diab,
A. R. Devitre,
S. Ferry,
S. J. Frank,
C. J. Hansen,
J. Jerkins,
J. D. Johnson,
P. Lunia,
J. van de Lindt,
S. Mackie
, et al. (16 additional authors not shown)
Abstract:
The MANTA (Modular Adjustable Negative Triangularity ARC-class) design study investigated how negative-triangularity (NT) may be leveraged in a compact, fusion pilot plant (FPP) to take a ``power-handling first" approach. The result is a pulsed, radiative, ELM-free tokamak that satisfies and exceeds the FPP requirements described in the 2021 National Academies of Sciences, Engineering, and Medicin…
▽ More
The MANTA (Modular Adjustable Negative Triangularity ARC-class) design study investigated how negative-triangularity (NT) may be leveraged in a compact, fusion pilot plant (FPP) to take a ``power-handling first" approach. The result is a pulsed, radiative, ELM-free tokamak that satisfies and exceeds the FPP requirements described in the 2021 National Academies of Sciences, Engineering, and Medicine report ``Bringing Fusion to the U.S. Grid". A self-consistent integrated modeling workflow predicts a fusion power of 450 MW and a plasma gain of 11.5 with only 23.5 MW of power to the scrape-off layer (SOL). This low $P_\text{SOL}$ together with impurity seeding and high density at the separatrix results in a peak heat flux of just 2.8 MW/m$^{2}$. MANTA's high aspect ratio provides space for a large central solenoid (CS), resulting in ${\sim}$15 minute inductive pulses. In spite of the high B fields on the CS and the other REBCO-based magnets, the electromagnetic stresses remain below structural and critical current density limits. Iterative optimization of neutron shielding and tritium breeding blanket yield tritium self-sufficiency with a breeding ratio of 1.15, a blanket power multiplication factor of 1.11, toroidal field coil lifetimes of $3100 \pm 400$ MW-yr, and poloidal field coil lifetimes of at least $890 \pm 40$ MW-yr. Following balance of plant modeling, MANTA is projected to generate 90 MW of net electricity at an electricity gain factor of ${\sim}2.4$. Systems-level economic analysis estimates an overnight cost of US\$3.4 billion, meeting the NASEM FPP requirement that this first-of-a-kind be less than US\$5 billion. The toroidal field coil cost and replacement time are the most critical upfront and lifetime cost drivers, respectively.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Materials for Fusion Energy: Key Challenges and Guiding Principles for Develo** Under High Design Uncertainty
Authors:
David Cohen-Tanugi,
Myles G. Stapelberg,
Michael P. Short,
Sara E. Ferry,
Dennis G. Whyte,
Zachary S. Hartwig,
Tonio Buonassisi
Abstract:
Fusion energy is at an important inflection point in its development: multiple government agencies and private companies are now planning fusion pilot plants to deliver electricity to the grid in the next decade. However, realizing fusion as a technically and economically viable energy source depends on develo** and qualifying materials that can withstand the extreme environment inside a fusion…
▽ More
Fusion energy is at an important inflection point in its development: multiple government agencies and private companies are now planning fusion pilot plants to deliver electricity to the grid in the next decade. However, realizing fusion as a technically and economically viable energy source depends on develo** and qualifying materials that can withstand the extreme environment inside a fusion power plant. This Perspective seeks to engage the materials science community in this effort. We first outline the principal materials challenges and research opportunities for fusion. Next, we argue that fusion is distinct from other energy applications with respect to materials, not just in the magnitude and complexity of the technical challenges but also in the present level of uncertainty in materials design requirements. To address this, we finally propose a research framework based on an iterative co-evolution of materials science and fusion power plant design requirements.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Radiative pulsed L-mode operation in ARC-class reactors
Authors:
S. J. Frank,
C. J. Perks,
A. O. Nelson,
T. Qian,
S. **,
A. J. Cavallaro,
A. Rutkowski,
A. H. Reiman,
J. P. Freidberg,
P. Rodriguez-Fernandez,
D. G. Whyte
Abstract:
A new ARC-class, highly-radiative, pulsed, L-mode, burning plasma scenario is developed and evaluated as a candidate for future tokamak reactors. Pulsed inductive operation alleviates the stringent current drive requirements of steady-state reactors, and operation in L-mode affords ELM-free access to $\sim90\%$ core radiation fractions, significantly reducing the divertor power handling requiremen…
▽ More
A new ARC-class, highly-radiative, pulsed, L-mode, burning plasma scenario is developed and evaluated as a candidate for future tokamak reactors. Pulsed inductive operation alleviates the stringent current drive requirements of steady-state reactors, and operation in L-mode affords ELM-free access to $\sim90\%$ core radiation fractions, significantly reducing the divertor power handling requirements. In this configuration the fusion power density can be maximized despite L-mode confinement by utilizing high-field to increase plasma densities and current. This allows us to obtain high gain in robust scenarios in compact devices with $P_\mathrm{fus} > 1000\,$MW despite low confinement. We demonstrate the feasibility of such scenarios here; first by showing that they avoid violating 0-D tokamak limits, and then by performing self-consistent integrated simulations of flattop operation including neoclassical and turbulent transport, magnetic equilibrium, and RF current drive models. Finally we examine the potential effect of introducing negative triangularity with a 0-D model. Our results show high-field radiative pulsed L-mode scenarios are a promising alternative to the typical steady state advanced tokamak scenarios which have dominated tokamak reactor development.
△ Less
Submitted 9 September, 2022; v1 submitted 18 July, 2022;
originally announced July 2022.
-
Conceptual design study for heat exhaust management in the ARC fusion pilot plant
Authors:
A. Q. Kuang,
N. M. Cao,
A. J. Creely,
C. A. Dennett,
J. Hecla,
B. LaBombard,
R. A. Tinguely,
E. A. Tolman,
H. Hoffman,
M. Major,
J. Ruiz Ruiz,
D. Brunner,
P. Grover,
C. Laughman,
B. N. Sorbom,
D. G. Whyte
Abstract:
The ARC pilot plant conceptual design study has been extended beyond its initial scope [B. N. Sorbom et al., FED 100 (2015) 378] to explore options for managing ~525 MW of fusion power generated in a compact, high field (B_0 = 9.2 T) tokamak that is approximately the size of JET (R_0 = 3.3 m). Taking advantage of ARC's novel design - demountable high temperature superconductor toroidal field (TF)…
▽ More
The ARC pilot plant conceptual design study has been extended beyond its initial scope [B. N. Sorbom et al., FED 100 (2015) 378] to explore options for managing ~525 MW of fusion power generated in a compact, high field (B_0 = 9.2 T) tokamak that is approximately the size of JET (R_0 = 3.3 m). Taking advantage of ARC's novel design - demountable high temperature superconductor toroidal field (TF) magnets, poloidal magnetic field coils located inside the TF, and vacuum vessel (VV) immersed in molten salt FLiBe blanket - this follow-on study has identified innovative and potentially robust power exhaust management solutions.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnets
Authors:
B. N. Sorbom,
J. Ball,
T. R. Palmer,
F. J. Mangiarotti,
J. M. Sierchio,
P. Bonoli,
C. Kasten,
D. A. Sutherland,
H. S. Barnard,
C. B. Haakonsen,
J. Goh,
C. Sung,
D. G. Whyte
Abstract:
The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 200-250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) supercon…
▽ More
The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 200-250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) superconducting toroidal field coils, which have joints to enable disassembly. This allows the vacuum vessel to be replaced quickly, mitigating first wall survivability concerns, and permits a single device to test many vacuum vessel designs and divertor materials. The design point has a plasma fusion gain of Q_p~13.6, yet is fully non-inductive, with a modest bootstrap fraction of only ~63%. Thus ARC offers a high power gain with relatively large external control of the current profile. This highly attractive combination is enabled by the ~23 T peak field on coil with newly available REBCO superconductor technology. External current drive is provided by two innovative inboard RF launchers using 25 MW of lower hybrid and 13.6 MW of ion cyclotron fast wave power. The resulting efficient current drive provides a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing fluorine lithium beryllium (FLiBe) molten salt. The liquid blanket is low-risk technology and provides effective neutron moderation and shielding, excellent heat removal, and a tritium breeding ratio >= 1.1. The large temperature range over which FLiBe is liquid permits blanket operation at 900 K with single phase fluid cooling and a high-efficiency Brayton cycle, allowing for net electricity generation when operating ARC as a Pilot power plant.
△ Less
Submitted 16 August, 2015; v1 submitted 10 September, 2014;
originally announced September 2014.
-
The Madison plasma dynamo experiment: a facility for studying laboratory plasma astrophysics
Authors:
C. M. Cooper,
J. Wallace,
M. Brookhart,
M. Clark,
C. Collins,
W. X. Ding,
K. Flanagan,
I. Khalzov,
Y. Li,
J. Milhone,
M. Nornberg,
P. Nonn,
D. Weisberg,
D. G. Whyte,
E. Zweibel,
C. B. Forest
Abstract:
The Madison plasma dynamo experiment (MPDX) is a novel, versatile, basic plasma research device designed to investigate flow driven magnetohydrodynamic (MHD) instabilities and other high-$β$ phenomena with astrophysically relevant parameters. A 3 m diameter vacuum vessel is lined with 36 rings of alternately oriented 4000 G samarium cobalt magnets which create an axisymmetric multicusp that contai…
▽ More
The Madison plasma dynamo experiment (MPDX) is a novel, versatile, basic plasma research device designed to investigate flow driven magnetohydrodynamic (MHD) instabilities and other high-$β$ phenomena with astrophysically relevant parameters. A 3 m diameter vacuum vessel is lined with 36 rings of alternately oriented 4000 G samarium cobalt magnets which create an axisymmetric multicusp that contains $\sim$14 m$^{3}$ of nearly magnetic field free plasma that is well confined and highly ionized $(>50\%)$. At present, 8 lanthanum hexaboride (LaB$_6$) cathodes and 10 molybdenum anodes are inserted into the vessel and biased up to 500 V, drawing 40 A each cathode, ionizing a low pressure Ar or He fill gas and heating it. Up to 100 kW of electron cyclotron heating (ECH) power is planned for additional electron heating. The LaB$_6$ cathodes are positioned in the magnetized edge to drive toroidal rotation through ${\bf J}\times{\bf B}$ torques that propagate into the unmagnetized core plasma. Dynamo studies on MPDX require a high magnetic Reynolds number $Rm > 1000$, and an adjustable fluid Reynolds number $10< Re <1000$, in the regime where the kinetic energy of the flow exceeds the magnetic energy ($M_A^2=($v$/$v$_A)^2 > 1$). Initial results from MPDX are presented along with a 0-dimensional power and particle balance model to predict the viscosity and resistivity to achieve dynamo action.
△ Less
Submitted 7 January, 2014; v1 submitted 31 October, 2013;
originally announced October 2013.
