Showing 1–50 of 99 results for author: White, P

Targeting low micro-roughness for 3D printed aluminium mirrors using a hot isostatic press

Authors: Carolyn Atkins, Younes Chahid, Gregory Lister, Rhys Tuck, Richard Kotlewski, Robert M. Snell, Elaine R. Livera, Mariam Faour, Iain Todd, Robert Deffley, James Shipley, Tom Walsh, Johannes Gardstam, Cyril Bourgenot, Paul White, Spencer Davies, Samuel Tammas-Williams

Abstract: Additive manufacturing (AM; 3D printing) in aluminium using laser powder bed fusion provides a new design space for lightweight mirror production. Printing layer-by-layer enables the use of intricate lattices for mass reduction, as well as organic shapes generated by topology optimisation, resulting in mirrors optimised for function as opposed to subtractive machining. However, porosity, a common… ▽ More Additive manufacturing (AM; 3D printing) in aluminium using laser powder bed fusion provides a new design space for lightweight mirror production. Printing layer-by-layer enables the use of intricate lattices for mass reduction, as well as organic shapes generated by topology optimisation, resulting in mirrors optimised for function as opposed to subtractive machining. However, porosity, a common AM defect, is present in printed aluminium and it is a result of the printing environment being either too hot or too cold, or gas entrapped bubbles within the aluminium powder. When present in an AM mirror substrates, porosity manifests as pits on the reflective surface, which increases micro-roughness and therefore scattered light. There are different strategies to reduce the impact of porosity: elimination during printing, coating the aluminium print in nickel phosphorous, or to apply a heat and pressure treatment to close the pores, commonly known as a hot isostatic press (HIP). This paper explores the application of HIP on printed aluminium substrates intended for mirror production using single point diamond turning (SPDT). The objective of the HIP is to reduce porosity whilst targeting a small grain growth within the aluminium, which is important in allowing the SPDT to generate surfaces with low micro-roughness. For this study, three disks, 50 mm diameter by 5 mm, were printed in AlSi10Mg at 0 deg, 45 deg, and 90 deg with respect to the build plate. X-ray computed tomography (XCT) was conducted before and after the HIP cycle to confirm the effectiveness of HIP to close porosity. The disks were SPDT and the micro-roughness evaluated. Mechanical testing and electron backscatter diffraction (EBSD) was used to quantify the mechanical strength and the grain size after HIP. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 14 pages, 8 figures, submitted to SPIE Astronomical Telescopes & Instrumentation, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI (Conference 13100, Paper 141)

Clustering-Based Validation Splits for Domain Generalisation

Authors: Andrea Napoli, Paul White

Abstract: This paper considers the problem of model selection under domain shift. In this setting, it is proposed that a high maximum mean discrepancy (MMD) between the training and validation sets increases the generalisability of selected models. A data splitting algorithm based on kernel k-means clustering, which maximises this objective, is presented. The algorithm leverages linear programming to contro… ▽ More This paper considers the problem of model selection under domain shift. In this setting, it is proposed that a high maximum mean discrepancy (MMD) between the training and validation sets increases the generalisability of selected models. A data splitting algorithm based on kernel k-means clustering, which maximises this objective, is presented. The algorithm leverages linear programming to control the size, label, and (optionally) group distributions of the splits, and comes with convergence guarantees. The technique consistently outperforms alternative splitting strategies across a range of datasets and training algorithms, for both domain generalisation (DG) and unsupervised domain adaptation (UDA) tasks. Analysis also shows the MMD between the training and validation sets to be strongly rank-correlated ($ρ=0.63$) with test domain accuracy, further substantiating the validity of this approach. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Grid-drawings of graphs in three-dimensions

Authors: Jozsef Balogh, Ethan Patrick White

Abstract: Using probabilistic methods, we obtain grid-drawings of graphs without crossings with low volume and small aspect ratio. We show that every $D$-degenerate graph on $n$ vertices can be drawn in $[m]^3$ where $m^3 = O(D^2 n\log n)$. In particular, every graph of bounded maximum degree can be drawn in a grid with volume $O(n \log n)$. Using probabilistic methods, we obtain grid-drawings of graphs without crossings with low volume and small aspect ratio. We show that every $D$-degenerate graph on $n$ vertices can be drawn in $[m]^3$ where $m^3 = O(D^2 n\log n)$. In particular, every graph of bounded maximum degree can be drawn in a grid with volume $O(n \log n)$. △ Less

Submitted 14 June, 2024; v1 submitted 2 April, 2024; originally announced April 2024.

MSC Class: 68R10

Improving Uniquely Decodable Codes in Binary Adder Channels

Authors: József Balogh, The Nguyen, Patric R. J. Ostergard, Ethan Patrick White, Michael Wigal

Abstract: We present a general method to modify existing uniquely decodable codes in the $T$-user binary adder channel. If at least one of the original constituent codes does not have average weight exactly half of the dimension, then our method produces a new set of constituent codes in a higher dimension, with a strictly higher rate. Using our method we improve the highest known rate for the $T$-user bina… ▽ More We present a general method to modify existing uniquely decodable codes in the $T$-user binary adder channel. If at least one of the original constituent codes does not have average weight exactly half of the dimension, then our method produces a new set of constituent codes in a higher dimension, with a strictly higher rate. Using our method we improve the highest known rate for the $T$-user binary adder channel for all $T \geq 2$. This information theory problem is equivalent to co-Sidon problems initiated by Lindstr{ö}m in the 1960s, and also the multi-set union-free problem. Our results improve the known lower bounds in these settings as well. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Comments: 8 pages

MSC Class: 05D40; 05C65; 05D05; 94A40; 05B10

On Axial Symmetry in Convex Bodies

Authors: Ritesh Goenka, Kenneth Moore, Wen Rui Sun, Ethan Patrick White

Abstract: For a two-dimensional convex body, the Kovner-Besicovitch measure of symmetry is defined as the volume ratio of the largest centrally symmetric body contained inside the body to the original body. A classical result states that the Kovner-Besicovitch measure is at least $2/3$ for every convex body and equals $2/3$ for triangles. Lassak showed that an alternative measure of symmetry, i.e., symmetry… ▽ More For a two-dimensional convex body, the Kovner-Besicovitch measure of symmetry is defined as the volume ratio of the largest centrally symmetric body contained inside the body to the original body. A classical result states that the Kovner-Besicovitch measure is at least $2/3$ for every convex body and equals $2/3$ for triangles. Lassak showed that an alternative measure of symmetry, i.e., symmetry about a line (axiality) has a value of at least $2/3$ for every convex body. However, the smallest known value of the axiality of a convex body is around $0.81584$, achieved by a convex quadrilateral. We show that every plane convex body has axiality at least $\frac{2}{41}(10 + 3 \sqrt{2}) \approx 0.69476$, thereby establishing a separation with the central symmetry measure. Moreover, we find a family of convex quadrilaterals with axiality approaching $\frac{1}{3}(\sqrt{2}+1) \approx 0.80474$. We also establish improved bounds for a ``folding" measure of axial symmetry for plane convex bodies. Finally, we establish improved bounds for a generalization of axiality to high-dimensional convex bodies. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Comments: 26 pages, 14 figures

MSC Class: 52A10; 52A38 (Primary) 52A20; 52A41 (Secondary)

An annotated bibliography for comparative prime number theory

Authors: Greg Martin, Pu Justin Scarfy Yang, Aram Bahrini, Prajeet Bajpai, Kübra Benli, Jenna Downey, Yuan Yuan Li, Xiaoxuan Liang, Amir Parvardi, Reginald Simpson, Ethan Patrick White, Chi Hoi Yip

Abstract: The goal of this annotated bibliography is to record every publication on the topic of comparative prime number theory together with a summary of its results. We use a unified system of notation for the quantities being studied and for the hypotheses under which results are obtained. We encourage feedback on this manuscript (see the end of Section~1 for details). The goal of this annotated bibliography is to record every publication on the topic of comparative prime number theory together with a summary of its results. We use a unified system of notation for the quantities being studied and for the hypotheses under which results are obtained. We encourage feedback on this manuscript (see the end of Section~1 for details). △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: 98 pages; supersedes "Comparative prime number theory: A survey" (arXiv:1202.3408)

MSC Class: 11N13 (11Y35)

Statement from the American Linear Collider Committee to the P5 subpanel

Authors: J. A. Bagger, S. Belomestnykh, P. C. Bhat, J. E. Brau, M. Demarteau, D. Denisov, S. Gori, P. D. Grannis, T. Junginger, A. J. Lankford, M. Liepe, T. W. Markiewicz, H. E. Montgomery, M. Perelstein, M. E. Peskin, J. Strube, A. P. White, G. W. Wilson

Abstract: This statement from the American Linear Collider Committee to the P5 subpanel has three purposes. It presents a brief summary of the case for an $e^+e^-$ Higgs factory that has emerged from Snowmass 2021. It highlights the special virtues of the ILC that are shared with other linear colliders but not with circular colliders. Finally, it calls attention to the resources available in the ILC White P… ▽ More This statement from the American Linear Collider Committee to the P5 subpanel has three purposes. It presents a brief summary of the case for an $e^+e^-$ Higgs factory that has emerged from Snowmass 2021. It highlights the special virtues of the ILC that are shared with other linear colliders but not with circular colliders. Finally, it calls attention to the resources available in the ILC White Paper for Snowmass (arXiv:2203.07622). The ALCC urges P5 to move the Higgs factory forward as a global project by assigning the idea of an $e^+e^-$ Higgs factory high priority, initiating a global discussion of the technology choice and cost sharing, and offering the option of siting the Higgs factory in the U.S. △ Less

Submitted 17 May, 2023; v1 submitted 20 April, 2023; originally announced April 2023.

Comments: 6 pages

Improved estimates on the number of unit perimeter triangles

Authors: Ritesh Goenka, Kenneth Moore, Ethan Patrick White

Abstract: We obtain new upper and lower bounds on the number of unit perimeter triangles spanned by points in the plane. We also establish improved bounds in the special case where the point set is a section of the integer grid. We obtain new upper and lower bounds on the number of unit perimeter triangles spanned by points in the plane. We also establish improved bounds in the special case where the point set is a section of the integer grid. △ Less

Submitted 8 April, 2023; originally announced April 2023.

Comments: 8 pages, 1 figure

MSC Class: 52C10

Pointwise density estimation on metric spaces and applications in seismology

Authors: Galatia Cleanthous, Athanasios G. Georgiadis, Philip A. White

Abstract: We are studying the problem of estimating density in a wide range of metric spaces, including the Euclidean space, the sphere, the ball, and various Riemannian manifolds. Our framework involves a metric space with a doubling measure and a self-adjoint operator, whose heat kernel exhibits Gaussian behaviour. We begin by reviewing the construction of kernel density estimators and the related backgro… ▽ More We are studying the problem of estimating density in a wide range of metric spaces, including the Euclidean space, the sphere, the ball, and various Riemannian manifolds. Our framework involves a metric space with a doubling measure and a self-adjoint operator, whose heat kernel exhibits Gaussian behaviour. We begin by reviewing the construction of kernel density estimators and the related background information. As a novel result, we present a pointwise kernel density estimation for probability density functions that belong to general Hölder spaces. The study is accompanied by an application in Seismology. Precisely, we analyze a globally-indexed dataset of earthquake occurrence and compare the out-of-sample performance of several approximated kernel density estimators indexed on the sphere. △ Less

Submitted 31 March, 2023; originally announced April 2023.

Additive structure in convex translates

Authors: Gabriel Currier, Jozsef Solymosi, Ethan Patrick White

Abstract: Let $\mathcal{P}$ be a set of points in the plane, and $\mathcal{S}$ a strictly convex set of points. In this note, we show that if $\mathcal{P}$ contains many translates of $\mathcal{S}$, then these translates must come from a generalized arithmetic progression of low dimension. We also discuss an application to the unit distance conjecture. Let $\mathcal{P}$ be a set of points in the plane, and $\mathcal{S}$ a strictly convex set of points. In this note, we show that if $\mathcal{P}$ contains many translates of $\mathcal{S}$, then these translates must come from a generalized arithmetic progression of low dimension. We also discuss an application to the unit distance conjecture. △ Less

Submitted 27 February, 2023; originally announced February 2023.

MSC Class: 52C10; 52C30; 05D99

An almost-tight $L^2$ autoconvolution inequality

Authors: Ethan Patrick White

Abstract: Let $\mathcal{F}$ denote the set of functions $f \colon [-1/2,1/2] \to \mathbb{R}$ such that $\int f = 1$. We determine the value of $\inf_{f \in \mathcal{F}} \| f \ast f \|_2$ up to a 0.0014\% error, thereby making progress on a problem asked by Ben Green. Furthermore, we prove that a unique minimizer exists. As a corollary, we obtain improvements on the maximum size of $B_h[g]$ sets for… ▽ More Let $\mathcal{F}$ denote the set of functions $f \colon [-1/2,1/2] \to \mathbb{R}$ such that $\int f = 1$. We determine the value of $\inf_{f \in \mathcal{F}} \| f \ast f \|_2$ up to a 0.0014\% error, thereby making progress on a problem asked by Ben Green. Furthermore, we prove that a unique minimizer exists. As a corollary, we obtain improvements on the maximum size of $B_h[g]$ sets for $(g,h) \in \{ (2,2),(3,2),(4,2),(1,3),(1,4)\}$. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Comments: 18 pages, 1 figure, 1 table

MSC Class: 05A08; 11B13; 42A05; 90C25

Joint Multivariate and Functional Modeling for Plant Traits and Reflectances

Authors: Philip A. White, Michael F. Christensen, Henry Frye, Alan E. Gelfand, John A. Silander Jr

Abstract: The investigation of leaf-level traits in response to varying environmental conditions has immense importance for understanding plant ecology. Remote sensing technology enables measurement of the reflectance of plants to make inferences about underlying traits along environmental gradients. While much focus has been placed on understanding how reflectance and traits are related at the leaf-level,… ▽ More The investigation of leaf-level traits in response to varying environmental conditions has immense importance for understanding plant ecology. Remote sensing technology enables measurement of the reflectance of plants to make inferences about underlying traits along environmental gradients. While much focus has been placed on understanding how reflectance and traits are related at the leaf-level, the challenge of modelling the dependence of this relationship along environmental gradients has limited this line of inquiry. Here, we take up the problem of jointly modeling traits and reflectance given environment. Our objective is to assess not only response to environmental regressors but also dependence between trait levels and the reflectance spectrum in the context of this regression. This leads to joint modeling of a response vector of traits with reflectance arising as a functional response over the wavelength spectrum. To conduct this investigation, we employ a dataset from a global biodiversity hotspot, the Greater Cape Floristic Region in South Africa. △ Less

Submitted 1 October, 2022; originally announced October 2022.

Report of the Instrumentation Frontier Working Group for Snowmass 2021

Authors: Phillip S. Barbeau, Petra Merkel, **long Zhang, Darin Acosta, Anthony A. Affolder, Artur Apresyan, Marina Artuso, Vallary Bhopatkar, Stephen Butalla, Gabriella A. Carini, Thomas Cecil, Amy Connolly, C. Eric Dahl, Allison Deiana, Katherine Dunne, Carlos O. Escobar, Juan Estrada, Farah Fahim, James E. Fast, Maurice Garcia-Sciveres, Roxanne Guenette, Michael T. Hedges, Kent Irwin, Albrecht Karle, Wes Ketchum , et al. (20 additional authors not shown)

Abstract: Detector instrumentation is at the heart of scientific discoveries. Cutting edge technologies enable US particle physics to play a leading role worldwide. This report summarizes the current status of instrumentation for High Energy Physics (HEP), the challenges and needs of future experiments and indicates high priority research areas. The Snowmass Instrumentation Frontier studies detector technol… ▽ More Detector instrumentation is at the heart of scientific discoveries. Cutting edge technologies enable US particle physics to play a leading role worldwide. This report summarizes the current status of instrumentation for High Energy Physics (HEP), the challenges and needs of future experiments and indicates high priority research areas. The Snowmass Instrumentation Frontier studies detector technologies and Research and Development (R&D) needed for future experiments in collider physics, neutrino physics, rare and precision physics and at the cosmic frontier. It is divided into more or less diagonal areas with some overlap among a few of them. We lay out five high-level key messages that are geared towards ensuring the health and competitiveness of the US detector instrumentation community, and thus the entire particle physics landscape. △ Less

Submitted 3 November, 2022; v1 submitted 28 September, 2022; originally announced September 2022.

Comments: 53 pages, 0 figures, contribution to Snowmass 2021

Nonseparable Space-Time Stationary Covariance Functions on Networks cross Time

Authors: Emilio Porcu, Philip A. White, Marc G. Genton

Abstract: The advent of data science has provided an increasing number of challenges with high data complexity. This paper addresses the challenge of space-time data where the spatial domain is not a planar surface, a sphere, or a linear network, but a generalized network (termed a graph with Euclidean edges). Additionally, data are repeatedly measured over different temporal instants. We provide new classe… ▽ More The advent of data science has provided an increasing number of challenges with high data complexity. This paper addresses the challenge of space-time data where the spatial domain is not a planar surface, a sphere, or a linear network, but a generalized network (termed a graph with Euclidean edges). Additionally, data are repeatedly measured over different temporal instants. We provide new classes of nonseparable space-time stationary covariance functions where {\em space} can be a generalized network, a Euclidean tree, or a linear network, and where time can be linear or circular (seasonal). Because the construction principles are technical, we focus on illustrations that guide the reader through the construction of statistically interpretable examples. A simulation study demonstrates that we can recover the correct model when compared to misspecified models. In addition, our simulation studies show that we effectively recover simulation parameters. In our data analysis, we consider a traffic accident dataset that shows improved model performance based on covariance specifications and network-based metrics. △ Less

Submitted 5 August, 2022; originally announced August 2022.

Two-cardinal ideal operators and indescribability

Authors: Brent Cody, Philip White

Abstract: A well-known version of Rowbottom's theorem for supercompactness ultrafilters leads naturally to notions of two-cardinal Ramseyness and corresponding normal ideals introduced herein. Generalizing results of Baumgartner [7, 8], Feng [22] and the first author [16, 17], we study the hierarchies associated with a particular version of two-cardinal Ramseyness and a strong version of two-cardinal ineffa… ▽ More A well-known version of Rowbottom's theorem for supercompactness ultrafilters leads naturally to notions of two-cardinal Ramseyness and corresponding normal ideals introduced herein. Generalizing results of Baumgartner [7, 8], Feng [22] and the first author [16, 17], we study the hierarchies associated with a particular version of two-cardinal Ramseyness and a strong version of two-cardinal ineffability, as well as the relationships between these hierarchies and a natural notion of transfinite two-cardinal indescribability. △ Less

Submitted 17 June, 2024; v1 submitted 13 June, 2022; originally announced June 2022.

Comments: Made updates suggested by referee

MSC Class: 03E35; 03E55

Higgs Factory Considerations

Authors: J. A. Bagger, B. C. Barish, S. Belomestnykh, P. C. Bhat, J. E. Brau, M. Demarteau, D. Denisov, S. C. Eno, C. G. R. Geddes, P. D. Grannis, A. Hutton, A. J. Lankford, M. U. Liepe, D. B. MacFarlane, T. Markiewicz, H. E. Montgomery, J. R. Patterson, M. Perelstein, M. E. Peskin, M. C. Ross, J. Strube, A. P. White, G. W. Wilson

Abstract: We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena. We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena. △ Less

Submitted 17 March, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Impact of Side Chain Hydrophilicity on Packing, Swelling and Ion Interactions in Oxy-bithiophene Semiconductors

Authors: Nicholas Siemons, Drew Pearce, Camila Cendra, Hang Yu, Sachetan M. Tuladhar, Rawad K. Hallani, Rajendar Sheelamanthula, Garrett S. LeCroy, Lucas Siemons, Andrew J. P. White, Iain Mcculloch, Alberto Salleo, Jarvist M. Frost, Alexander Giovannitti, Jenny Nelson

Abstract: Exchanging hydrophobic alkyl-based side chains to hydrophilic glycol-based side chains is a widely adopted method for improving mixed-transport device performance, despite the impact on solid state packing and polymer-electrolyte interactions being poorly understood. Presented here is a Molecular Dynamics (MD) force field for modelling alkoxylated and glycolated polythiophenes. The force field is… ▽ More Exchanging hydrophobic alkyl-based side chains to hydrophilic glycol-based side chains is a widely adopted method for improving mixed-transport device performance, despite the impact on solid state packing and polymer-electrolyte interactions being poorly understood. Presented here is a Molecular Dynamics (MD) force field for modelling alkoxylated and glycolated polythiophenes. The force field is validated against known packing motifs for their monomer crystals. MD simulations, coupled with X-ray Diffraction (XRD), show that alkoxylated polythiophenes will pack with a `tilted stack' and straight interdigitating side chains, whilst their glycolated counterpart will pack with a `deflected stack' and an s-bend side chain configuration. MD simulations reveal water penetration pathways into the alkoxylated and glycolated crystals - through the π-stack and through the lamellar stack respectively. Finally, the two distinct ways tri-ethylene glycol polymers can bind to cations are revealed, showing the formation of a meta-stable single bound state, or an energetically deep double bound state, both with a strong side chain length dependance. The minimum energy pathways for the formation of the chelates are identified, showing the physical process through which cations can bind to one or two side chains of a glycolated polythiophene, with consequences for ion transport in bithiophene semiconductors. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Comments: 10 pages, 4 figures

Journal ref: Advanced Materials 34 (2022)

Erdős' minimum overlap problem

Authors: Ethan Patrick White

Abstract: We obtain a substantially improved lower bound for the minimum overlap problem asked by Erdős. Our approach uses elementary Fourier analysis to translate the problem to a convex optimization program. We obtain a substantially improved lower bound for the minimum overlap problem asked by Erdős. Our approach uses elementary Fourier analysis to translate the problem to a convex optimization program. △ Less

Submitted 14 January, 2022; originally announced January 2022.

Comments: 27 pages, 2 figures, 8 tables

MSC Class: 05A17; 42A16; 90C90

Updating the SiD Detector concept

Authors: M. Breidenbach, J. E. Brau, P. Burrows, T. Markiewicz, M. Stanitzki, J. Strube, A. P. White

Abstract: The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momen… ▽ More The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momentum resolution. The highly granular calorimeter system is optimized for Particle Flow application to achieve very good jet energy resolution over a wide range of energies. With a potential construction date of the ILC moving closer, it is now the time to review the design and technology decision that have been made during the DBD phase and reconsider them in the light of the recent technological advances. For each area of SiD development R&D topics and opportunities for participation will be discussed. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Asymptotics for the number of directions determined by $[n] \times [n]$ in $\mathbb{F}_p^2$

Authors: Greg Martin, Ethan Patrick White, Chi Hoi Yip

Abstract: Let $p$ be a prime and $n$ a positive integer such that $\sqrt{\frac p2} + 1 \leq n \leq \sqrt{p}$. For any arithmetic progression $A$ of length $n$ in $\mathbb{F}_p$, we establish an asymptotic formula for the number of directions determined by $A \times A \subset \mathbb{F}_p^2$. The key idea is to reduce the problem to counting the number of solutions to the bilinear Diophantine equation… ▽ More Let $p$ be a prime and $n$ a positive integer such that $\sqrt{\frac p2} + 1 \leq n \leq \sqrt{p}$. For any arithmetic progression $A$ of length $n$ in $\mathbb{F}_p$, we establish an asymptotic formula for the number of directions determined by $A \times A \subset \mathbb{F}_p^2$. The key idea is to reduce the problem to counting the number of solutions to the bilinear Diophantine equation $ad+bc=p$ in variables $1\le a,b,c,d\le n$; our asymptotic formula for the number of solutions is of independent interest. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 22 pages, 1 figure

MSC Class: 11D45; 11D09; 11B30; 11L05

Journal ref: Mathematika 68 (2022), no. 2, 511-534

Ookami: Deployment and Initial Experiences

Authors: Andrew Burford, Alan C. Calder, David Carlson, Barbara Chapman, Firat CoŞKun, Tony Curtis, Catherine Feldman, Robert J. Harrison, Yan Kang, Benjamin Michalow-Icz, Eric Raut, Eva Siegmann, Daniel G. Wood, Robert L. Deleon, Mathew Jones, Nikolay A. Simakov, Joseph P. White, Dossay Oryspayev

Abstract: Ookami is a computer technology testbed supported by the United States National Science Foundation. It provides researchers with access to the A64FX processor developed by Fujitsu in collaboration with RIKΞN for the Japanese path to exascale computing, as deployed in Fugaku, the fastest computer in the world. By focusing on crucial architectural details, the ARM-based, multi-core, 512-bit SIMD-vec… ▽ More Ookami is a computer technology testbed supported by the United States National Science Foundation. It provides researchers with access to the A64FX processor developed by Fujitsu in collaboration with RIKΞN for the Japanese path to exascale computing, as deployed in Fugaku, the fastest computer in the world. By focusing on crucial architectural details, the ARM-based, multi-core, 512-bit SIMD-vector processor with ultrahigh-bandwidth memory promises to retain familiar and successful programming models while achieving very high performance for a wide range of applications. We review relevant technology and system details, and the main body of the paper focuses on initial experiences with the hardware and software ecosystem for micro-benchmarks, mini-apps, and full applications, and starts to answer questions about where such technologies fit into the NSF ecosystem. △ Less

Submitted 16 June, 2021; originally announced June 2021.

Comments: 14 pages, 7 figures, PEARC '21: Practice and Experience in Advanced Research Computing, July 18--22, 2021, Boston, MA, USA

RandCrowns: A Quantitative Metric for Imprecisely Labeled Tree Crown Delineation

Authors: Dylan Stewart, Alina Zare, Sergio Marconi, Ben G. Weinstein, Ethan P. White, Sarah J. Graves, Stephanie A. Bohlman, Aditya Singh

Abstract: Supervised methods for object delineation in remote sensing require labeled ground-truth data. Gathering sufficient high quality ground-truth data is difficult, especially when targets are of irregular shape or difficult to distinguish from background or neighboring objects. Tree crown delineation provides key information from remote sensing images for forestry, ecology, and management. However, t… ▽ More Supervised methods for object delineation in remote sensing require labeled ground-truth data. Gathering sufficient high quality ground-truth data is difficult, especially when targets are of irregular shape or difficult to distinguish from background or neighboring objects. Tree crown delineation provides key information from remote sensing images for forestry, ecology, and management. However, tree crowns in remote sensing imagery are often difficult to label and annotate due to irregular shape, overlap** canopies, shadowing, and indistinct edges. There are also multiple approaches to annotation in this field (e.g., rectangular boxes vs. convex polygons) that further contribute to annotation imprecision. However, current evaluation methods do not account for this uncertainty in annotations, and quantitative metrics for evaluation can vary across multiple annotators. In this paper, we address these limitations by develo** an adaptation of the Rand index for weakly-labeled crown delineation that we call RandCrowns. Our new RandCrowns evaluation metric provides a method to appropriately evaluate delineated tree crowns while taking into account imprecision in the ground-truth delineations. The RandCrowns metric reformulates the Rand index by adjusting the areas over which each term of the index is computed to account for uncertain and imprecise object delineation labels. Quantitative comparisons to the commonly used intersection over union method shows a decrease in the variance generated by differences among multiple annotators. Combined with qualitative examples, our results suggest that the RandCrowns metric is more robust for scoring target delineations in the presence of uncertainty and imprecision in annotations that are inherent to tree crown delineation. △ Less

Submitted 20 October, 2021; v1 submitted 5 May, 2021; originally announced May 2021.

Spatial Functional Data Modeling of Plant Reflectances

Authors: Philip A. White, Henry Frye, Michael F. Christensen, Alan E. Gelfand, John A. Silander Jr

Abstract: Plant reflectance spectra - the profile of light reflected by leaves across different wavelengths - supply the spectral signature for a species at a spatial location to enable estimation of functional and taxonomic diversity for plants. We consider leaf spectra as "responses" to be explained spatially. These spectra/reflectances are functions over a wavelength band that respond to the environment.… ▽ More Plant reflectance spectra - the profile of light reflected by leaves across different wavelengths - supply the spectral signature for a species at a spatial location to enable estimation of functional and taxonomic diversity for plants. We consider leaf spectra as "responses" to be explained spatially. These spectra/reflectances are functions over a wavelength band that respond to the environment. Our motivating data are gathered for several families from the Cape Floristic Region (CFR) in South Africa and lead us to develop rich novel spatial models that can explain spectra for genera within families. Wavelength responses for an individual leaf are viewed as a function of wavelength, leading to functional data modeling. Local environmental features become covariates. We introduce wavelength - covariate interaction since the response to environmental regressors may vary with wavelength, so may variance. Formal spatial modeling enables prediction of reflectances for genera at unobserved locations with known environmental features. We incorporate spatial dependence, wavelength dependence, and space-wavelength interaction (in the spirit of space-time interaction). We implement out-of-sample validation to select a best model, discovering that the model features listed above are all informative for the functional data analysis. We then supply interpretation of the results under the selected model. △ Less

Submitted 25 March, 2021; v1 submitted 5 February, 2021; originally announced February 2021.

Comments: 20 pages main manuscript, 20 pages supplement

Flexible Validity Conditions for the Multivariate Matérn Covariance in any Spatial Dimension and for any Number of Components

Authors: Xavier Emery, Emilio Porcu, Philip White

Abstract: This paper addresses the problem of finding parametric constraints that ensure the validity of the multivariate Mat{é}rn covariance for modeling the spatial correlation structure of coregionalized variables defined in an Euclidean space. To date, much attention has been given to the bivariate setting, while the multivariate setting has been explored to a limited extent only. The existing condition… ▽ More This paper addresses the problem of finding parametric constraints that ensure the validity of the multivariate Mat{é}rn covariance for modeling the spatial correlation structure of coregionalized variables defined in an Euclidean space. To date, much attention has been given to the bivariate setting, while the multivariate setting has been explored to a limited extent only. The existing conditions often imply severe restrictions on the upper bounds for the collocated correlation coefficients, which makes the multivariate Mat{é}rn model appealing for the case of weak spatial cross-dependence only. We provide a collection of sufficient validity conditions for the multivariate Mat{é}rn covariance that allows for more flexible parameterizations than those currently available, and prove that one can attain considerably higher upper bounds for the collocated correlation coefficients in comparison with our competitors. We conclude with an illustration on a trivariate geochemical data set and show that our enlarged parametric space yields better fitting performances. △ Less

Submitted 3 January, 2022; v1 submitted 11 January, 2021; originally announced January 2021.

On the number of distinct roots of a lacunary polynomial over finite fields

Authors: Jozsef Solymosi, Ethan P. White, Chi Hoi Yip

Abstract: We obtain new upper bounds on the number of distinct roots of lacunary polynomials over finite fields. Our focus will be on polynomials for which there is a large gap between consecutive exponents in the monomial expansion. We obtain new upper bounds on the number of distinct roots of lacunary polynomials over finite fields. Our focus will be on polynomials for which there is a large gap between consecutive exponents in the monomial expansion. △ Less

Submitted 23 August, 2020; originally announced August 2020.

Comments: 16 pages, 3 figures

MSC Class: 11T06

Journal ref: Finite Fields Appl. 72 (2021), 101820, 16 pp

Difference Necklaces

Authors: Ethan P. White, Richard K. Guy, Renate Scheidler

Abstract: An $(a,b)$-difference necklace of length $n$ is a circular arrangement of the integers $0, 1, 2, \ldots , n-1$ such that any two neighbours have absolute difference $a$ or $b$. We prove that, subject to certain conditions on $a$ and $b$, such arrangements exist, and provide recurrence relations for the number of $(a,b)$-difference necklaces for $( a, b ) = ( 1, 2 )$, $( 1, 3 )$, $( 2, 3 )$ and… ▽ More An $(a,b)$-difference necklace of length $n$ is a circular arrangement of the integers $0, 1, 2, \ldots , n-1$ such that any two neighbours have absolute difference $a$ or $b$. We prove that, subject to certain conditions on $a$ and $b$, such arrangements exist, and provide recurrence relations for the number of $(a,b)$-difference necklaces for $( a, b ) = ( 1, 2 )$, $( 1, 3 )$, $( 2, 3 )$ and $( 1, 4 )$. Using techniques similar to those employed for enumerating Hamiltonian cycles in certain families of graphs, we obtain these explicit recurrence relations and prove that the number of $(a,b)$-difference necklaces of length $n$ satisfies a linear recurrence relation for all permissible values $a$ and $b$. Our methods generalize to necklaces where an arbitrary number of differences is allowed. △ Less

Submitted 26 June, 2020; originally announced June 2020.

Comments: 32 pages, 20 figures, 4 tables

MSC Class: 11B37; 05C30; 05C45; 11Y55

Improving Piecewise Linear Snow Density Models through Hierarchical Spatial and Orthogonal Functional Smoothing

Authors: Philip White, Durban Keeler, Daniel Sheanshang, Summer Rupper

Abstract: Snow density estimates as a function of depth are used for understanding climate processes, evaluating water accumulation trends in polar regions, and estimating glacier mass balances. The common and interpretable physically-derived differential equation models for snow density are piecewise linear as a function of depth (on a transformed scale); thus, they can fail to capture important data featu… ▽ More Snow density estimates as a function of depth are used for understanding climate processes, evaluating water accumulation trends in polar regions, and estimating glacier mass balances. The common and interpretable physically-derived differential equation models for snow density are piecewise linear as a function of depth (on a transformed scale); thus, they can fail to capture important data features. Moreover, the differential equation parameters show strong spatial autocorrelation. To address these issues, we allow the parameters of the physical model, including random change points over depth, to vary spatially. We also develop a framework for functionally smoothing the physically-motivated model. To preserve inference on the interpretable physical model, we project the smoothing function into the physical model's spatially varying null space. The proposed spatially and functionally smoothed snow density model better fits the data while preserving inference on physical parameters. Using this model, we find significant spatial variation in the parameters that govern snow densification. △ Less

Submitted 21 June, 2021; v1 submitted 16 June, 2020; originally announced June 2020.

Using phase data from MR temperature imaging to visualize anatomy during MRI-guided focused ultrasound neurosurgery

Authors: Nathan McDannold, P. Jason White, G. Rees Cosgrove

Abstract: Neurosurgery targets in the thalamus can be challenging to identify during transcranial MRI-guided focused ultrasound (MRgFUS) thermal ablation due to poor image quality. They also neighbor structures that can result in side effects if damaged. Here we demonstrate that the phase data obtained during MRgFUS for MR temperature imaging (MRTI) contains anatomic information that could be useful in guid… ▽ More Neurosurgery targets in the thalamus can be challenging to identify during transcranial MRI-guided focused ultrasound (MRgFUS) thermal ablation due to poor image quality. They also neighbor structures that can result in side effects if damaged. Here we demonstrate that the phase data obtained during MRgFUS for MR temperature imaging (MRTI) contains anatomic information that could be useful in guiding this procedure. This approach was evaluated in 68 thalamotomies for essential tremor (ET). We found that we could readily visualize the red nucleus and subthalamic nucleus, and those nuclei were consistently aligned with the sonication target coordinates. We also could consistently visualize the internal capsule, which needs to be protected from thermal damage to prevent side effects. Preliminary results from four pallidotomies in Parkinson's disease patients suggest that this approach might also be useful in visualizing the optic tract in addition to the internal capsule. Overall, this approach can visualize anatomic landmarks that may be useful to refine atlas-based targeting for MRgFUS. Since the same data is used for MRTI and anatomic visualization, there are no errors induced by registration to previously obtained planning images or image distortion, and no additional time is needed. △ Less

Submitted 22 May, 2020; originally announced May 2020.

On the directions determined by a Cartesian product in an affine Galois plane

Authors: Daniel Di Benedetto, Jozsef Solymosi, Ethan P. White

Abstract: We prove that the number of directions contained in a set of the form $A \times B \subset AG(2,p)$, where $p$ is prime, is at least $|A||B| - \min\{|A|,|B|\} + 2$. Here $A$ and $B$ are subsets of $GF(p)$ each with at least two elements and $|A||B| <p$. This bound is tight for an infinite class of examples. Our main tool is the use of the Rédei polynomial with Szőnyi's extension. As an application… ▽ More We prove that the number of directions contained in a set of the form $A \times B \subset AG(2,p)$, where $p$ is prime, is at least $|A||B| - \min\{|A|,|B|\} + 2$. Here $A$ and $B$ are subsets of $GF(p)$ each with at least two elements and $|A||B| <p$. This bound is tight for an infinite class of examples. Our main tool is the use of the Rédei polynomial with Szőnyi's extension. As an application of our main result, we obtain an upper bound on the clique number of a Paley graph, matching the current best bound obtained recently by Hanson and Petridis. △ Less

Submitted 23 June, 2020; v1 submitted 20 January, 2020; originally announced January 2020.

Comments: 8 pages

MSC Class: 11T06

Hierarchical Integrated Spatial Process Modeling of Monotone West Antarctic Snow Density Curves

Authors: Philip A. White, Durban G. Keeler, Summer Rupper

Abstract: Snow density estimates below the surface, used with airplane-acquired ice-penetrating radar measurements, give a site-specific history of snow water accumulation. Because it is infeasible to drill snow cores across all of Antarctica to measure snow density and because it is critical to understand how climatic changes are affecting the world's largest freshwater reservoir, we develop methods that e… ▽ More Snow density estimates below the surface, used with airplane-acquired ice-penetrating radar measurements, give a site-specific history of snow water accumulation. Because it is infeasible to drill snow cores across all of Antarctica to measure snow density and because it is critical to understand how climatic changes are affecting the world's largest freshwater reservoir, we develop methods that enable snow density estimation with uncertainty in regions where snow cores have not been drilled. In inland West Antarctica, snow density increases monotonically as a function of depth, except for possible micro-scale variability or measurement error, and it cannot exceed the density of ice. We present a novel class of integrated spatial process models that allow interpolation of monotone snow density curves. For computational feasibility, we construct the space-depth process through kernel convolutions of log-Gaussian spatial processes. We discuss model comparison, model fitting, and prediction. Using this model, we extend estimates of snow density beyond the depth of the original core and estimate snow density curves where snow cores have not been drilled. Along flight lines with ice-penetrating radar, we use interpolated snow density curves to estimate recent water accumulation and find predominantly decreasing water accumulation over recent decades. △ Less

Submitted 19 July, 2021; v1 submitted 15 January, 2020; originally announced January 2020.

Journal ref: the Annals of Applied Statistics 2021, Vol. 15, No. 2, 556-571

Predicting skull lesions after clinical transcranial MRI-guided focused ultrasound with acoustic and thermal simulations

Authors: Nathan McDannold, P. Jason White, Rees Cosgrove

Abstract: Transcranial MRI-guided focused ultrasound (TcMRgFUS) thermal ablation is a noninvasive functional neurosurgery technique. Previous reports have shown that bone marrow damage in the skull can occur at high acoustic energies. While this damage is asymptomatic, it would be desirable to avoid it. Here we examined whether acoustic and thermal simulations can predict where the thermal lesions in the sk… ▽ More Transcranial MRI-guided focused ultrasound (TcMRgFUS) thermal ablation is a noninvasive functional neurosurgery technique. Previous reports have shown that bone marrow damage in the skull can occur at high acoustic energies. While this damage is asymptomatic, it would be desirable to avoid it. Here we examined whether acoustic and thermal simulations can predict where the thermal lesions in the skull might occur. Post-treatment imaging was obtained at 3-15 months after 40 clinical TcMRgFUS procedures, and skull lesions were observed after 16/40 treatments. The presence for lesions was predicted by the acoustic energy with a threshold of 18.1-21.1 kJ (maximum acoustic energy) and 97-112 kJ (total acoustic energy). The size and degree of the lesions was not always predicted by the acoustic en-ergy used during treatment alone. In contrast, the heating estimated by the acoustic and thermal simulations was pre-dictive of the lesion extent. The lesions appeared in areas that were predicted to have high temperatures, and when thin slice T2-weighted imaging was obtained at 3-15 months, an excellent agreement was observed between the predictions and lesion locations. While more work is needed to validate the absolute temperatures measurements in and around the skull, being able to predict the locations and onset for skull lesions could allow for better distribution of the acoustic energy over the skull. Understanding skull ab-sorption characteristics of TcMRgFUS could also be useful in optimizing transcranial focusing. △ Less

Submitted 29 November, 2019; originally announced December 2019.

Scale-up of room-temperature constructive quantum interference from single molecules to self-assembled molecular-electronic films

Authors: Xintai Wang, Troy L. R. Bennett, Ali Ismael, Luke A. Wilkinson, Joseph Hamill, Andrew J. P. White, Iain M. Grace, Tim Albrecht, Benjamin J. Robinson, Nicholas J. Long, Lesley F. Cohen, Colin J. Lambert

Abstract: The realization of self-assembled molecular-electronic films, whose room-temperature transport properties are controlled by quantum interference (QI), is an essential step in the scale-up QI effects from single molecules to parallel arrays of molecules. Recently, the effect of destructive QI (DQI) on the electrical conductance of self-assembled monolayers (SAMs) has been investigated. Here, throug… ▽ More The realization of self-assembled molecular-electronic films, whose room-temperature transport properties are controlled by quantum interference (QI), is an essential step in the scale-up QI effects from single molecules to parallel arrays of molecules. Recently, the effect of destructive QI (DQI) on the electrical conductance of self-assembled monolayers (SAMs) has been investigated. Here, through a combined experimental and theoretical investigation, we demonstrate chemical control of different forms of constructive QI (CQI) in cross-plane transport through SAMs and assess its influence on cross-plane thermoelectricity in SAMs. It is known that the electrical conductance of single molecules can be controlled in a deterministic manner, by chemically varying their connectivity to external electrodes. Here, by employing synthetic methodologies to vary the connectivity of terminal anchor groups around aromatic anthracene cores, and by forming SAMs of the resulting molecules, we clearly demonstrate that this signature of CQI can be translated into SAM-on-gold molecular films. We show that the conductance of vertical molecular junctions formed from anthracene-based molecules with two different connectivities differ by a factor of approximately 16, in agreement with theoretical predictions for their conductance ratio based on constructive QI effects within the core. We also demonstrate that for molecules with thiol anchor groups, the Seebeck coefficient of such films is connectivity dependent and with an appropriate choice of connectivity can be boosted by ~50%. This demonstration of QI and its influence on thermoelectricity in SAMs represents a critical step towards functional ultra-thin-film devices for future thermoelectric and molecular-scale electronics applications. △ Less

Submitted 11 November, 2019; originally announced November 2019.

Generalized Evolutionary Point Processes: Model Specifications and Model Comparison

Authors: Philip A. White, Alan E. Gelfand

Abstract: Generalized evolutionary point processes offer a class of point process models that allows for either excitation or inhibition based upon the history of the process. In this regard, we propose modeling which comprises generalization of the nonlinear Hawkes process. Working within a Bayesian framework, model fitting is implemented through Markov chain Monte Carlo. This entails discussion of computa… ▽ More Generalized evolutionary point processes offer a class of point process models that allows for either excitation or inhibition based upon the history of the process. In this regard, we propose modeling which comprises generalization of the nonlinear Hawkes process. Working within a Bayesian framework, model fitting is implemented through Markov chain Monte Carlo. This entails discussion of computation of the likelihood for such point patterns. Furthermore, for this class of models, we discuss strategies for model comparison. Using simulation, we illustrate how well we can distinguish these models from point pattern specifications with conditionally independent event times, e.g., Poisson processes. Specifically, we demonstrate that these models can correctly identify true relationships (i.e., excitation or inhibition/control). Then, we consider a novel extension of the log Gaussian Cox process that incorporates evolutionary behavior and illustrate that our model comparison approach prefers the evolutionary log Gaussian Cox process compared to simpler models. We also examine a real dataset consisting of violent crime events from the 11th police district in Chicago from the year 2018. This data exhibits strong daily seasonality and changes across the year. After we account for these data attributes, we find significant but mild self-excitation, implying that event occurrence increases the intensity of future events. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Journal ref: Methodology and Computing in Applied Probability (2020+)

An element-wise approach for simulating transcranial MRI-guided focused ultrasound thermal ablation

Authors: Nathan McDannold, P. Jason White, Rees Cosgrove

Abstract: This work explored an element-wise approach to model transcranial MRI-guided focused ultrasound (TcMRgFUS) thermal ablation, a noninvasive approach to neurosurgery. Each element of the phased array transducer was simulated individually and could be simultaneously loaded into computer memory, allowing for rapid calculation of the pressure field for different phase offsets used for beam steering and… ▽ More This work explored an element-wise approach to model transcranial MRI-guided focused ultrasound (TcMRgFUS) thermal ablation, a noninvasive approach to neurosurgery. Each element of the phased array transducer was simulated individually and could be simultaneously loaded into computer memory, allowing for rapid calculation of the pressure field for different phase offsets used for beam steering and aberration correction. We simulated the pressure distribution for 431 sonications in 32 patients, applied the phase and magnitude values used during treatment, and estimated the resulting temperature rise. We systematically varied the relationship between CT-derived skull density and the acoustic attenuation and sound speed to obtain the best agreement between the predictions and MR temperature imaging (MRTI). The optimization was validated with simulations of 396 sonications from 40 additional treatments. After optimization, the predicted and measured heating agreed well (R2: 0.74 patients 1-32; 0.71 patients 33-72). The dimensions and obliquity of the heating in the simulated temperature maps correlated well with the MRTI (R2: 0.62, 0.74 respectively), but the measured heating was more spatially diffuse. The energy needed to achieve ablation varied by an order of magnitude (3.3-36.1 kJ). While this element-wise approach requires more computation time up front, it can be performed in parallel. It allows for rapid calculation of the three-dimensional heating at the focus for different phase and magnitude values on the array. We also show how this approach can be used to optimize the relationship between CT-derived skull density and acoustic properties. While the relationships found here need further validation in a larger patient population, these results demonstrate the promise of this approach to model TcMRgFUS. △ Less

Submitted 5 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. Research 1, 033205 (2019)

The performance of the partially overlap** samples t-tests at the limits

Authors: Ben Derrick, Deirdre Toher, Paul White

Abstract: This note includes an assessment of the partially overlap** samples t-tests in scenarios where elements of the test are at their extremes, including where only one sample contains independent observations This note includes an assessment of the partially overlap** samples t-tests in scenarios where elements of the test are at their extremes, including where only one sample contains independent observations △ Less

Submitted 3 June, 2019; originally announced June 2019.

Multivariate Functional Data Modeling with Time-varying Clustering

Authors: Philip A. White, Alan E. Gelfand

Abstract: We consider the situation where multivariate functional data has been collected over time at each of a set of sites. Our illustrative setting is bivariate, monitoring ozone and PM$_{10}$ levels as a function of time over the course of a year at a set of monitoring sites. The data we work with is from 24 monitoring sites in Mexico City which record hourly ozone and PM$_{10}$ levels. We use the data… ▽ More We consider the situation where multivariate functional data has been collected over time at each of a set of sites. Our illustrative setting is bivariate, monitoring ozone and PM$_{10}$ levels as a function of time over the course of a year at a set of monitoring sites. The data we work with is from 24 monitoring sites in Mexico City which record hourly ozone and PM$_{10}$ levels. We use the data for the year 2017. Hence, we have 48 functions to work with. Our objective is to implement model-based clustering of the functions across the sites. Using our example, such clustering can be considered for ozone and PM$_{10}$ individually or jointly. It may occur differentially for the two pollutants. More importantly for us, we allow that such clustering can vary with time. We model the multivariate functions across sites using a multivariate Gaussian process. With many sites and several functions at each site, we use dimension reduction to provide a stochastic process specification for the distribution of the collection of multivariate functions over the say $n$ sites. Furthermore, to cluster the functions, either individually by component or jointly with all components, we use the Dirichlet process which enables shared labeling of the functions across the sites. Specifically, we cluster functions based on their response to exogenous variables. Though the functions arise in continuous time, clustering in continuous time is extremely computationally demanding and not of practical interest. Therefore, we employ a partitioning of the time scale to capture time-varying clustering. △ Less

Submitted 1 May, 2019; v1 submitted 25 April, 2019; originally announced April 2019.

Journal ref: TEST (2020+)

On rigidity of unit-bar frameworks

Authors: Jozsef Solymosi, Ethan White

Abstract: We show the existence of infinitesimally rigid bipartite unit-bar frameworks in $\mathbb{R}^d$. We also construct unit-bar frameworks with girth up to 12 that are infinitesimally rigid in the plane. This answers problems proposed by Maehara. We show the existence of infinitesimally rigid bipartite unit-bar frameworks in $\mathbb{R}^d$. We also construct unit-bar frameworks with girth up to 12 that are infinitesimally rigid in the plane. This answers problems proposed by Maehara. △ Less

Submitted 12 August, 2018; originally announced August 2018.

Comments: Python code included in ancillary files

MSC Class: 52C10; 52C25

Modeling Daily Seasonality of Mexico City Ozone using Nonseparable Covariance Models on Circles Cross Time

Authors: Philip A. White, Emilio Porcu

Abstract: Mexico City tracks ground-level ozone levels to assess compliance with national ambient air quality standards and to prevent environmental health emergencies. Ozone levels show distinct daily patterns, within the city, and over the course of the year. To model these data, we use covariance models over space, circular time, and linear time. We review existing models and develop new classes of nonse… ▽ More Mexico City tracks ground-level ozone levels to assess compliance with national ambient air quality standards and to prevent environmental health emergencies. Ozone levels show distinct daily patterns, within the city, and over the course of the year. To model these data, we use covariance models over space, circular time, and linear time. We review existing models and develop new classes of nonseparable covariance models of this type, models appropriate for quasi-periodic data collected at many locations. With these covariance models, we use nearest-neighbor Gaussian processes to predict hourly ozone levels at unobserved locations in April and May, the peak ozone season, to infer compliance to Mexican air quality standards and to estimate respiratory health risk associated with ozone. Predicted compliance with air quality standards and estimated respiratory health risk vary greatly over space and time. In some regions, we predict exceedance of national standards for more than a third of the hours in April and May. On many days, we predict that nearly all of Mexico City exceeds nationally legislated ozone thresholds at least once. In peak regions, we estimate respiratory risk for ozone to be 55% higher on average than the annual average risk and as much at 170% higher on some days. △ Less

Submitted 15 July, 2018; originally announced July 2018.

Journal ref: Environmetrics. 2019;e2558

Non-separable Nearest-Neighbor Gaussian Process Model for Antarctic Surface Mass Balance and Ice Core Site Selection

Authors: Philip A. White, C. Shane Reese, William F. Christensen, Summer Rupper

Abstract: Surface mass balance (SMB) is an important factor in the estimation of sea level change, and data are collected to estimate models for prediction of SMB over the Antarctic ice sheets. Using a quality-controlled aggregate dataset of SMB field measurements with significantly more observations than previous analyses, a fully Bayesian nearest-neighbor Gaussian process model is posed to estimate Antarc… ▽ More Surface mass balance (SMB) is an important factor in the estimation of sea level change, and data are collected to estimate models for prediction of SMB over the Antarctic ice sheets. Using a quality-controlled aggregate dataset of SMB field measurements with significantly more observations than previous analyses, a fully Bayesian nearest-neighbor Gaussian process model is posed to estimate Antarctic SMB and propose new field measurement locations. A corresponding Antarctic SMB map is rendered using this model and is compared with previous estimates. A prediction uncertainty map is created to identify regions of high SMB uncertainty. The model estimates net SMB to be 2345 Gton $\text{yr}^{-1}$, with 95% credible interval (2273,2413) Gton $\text{yr}^{-1}$. Overall, these results suggest lower Antarctic SMB than previously reported. Using the model's uncertainty quantification, we propose 25 new measurement sites for field study utilizing a design to minimize integrated mean squared error. △ Less

Submitted 14 July, 2018; originally announced July 2018.

Journal ref: Environmetrics. 2019;e2579

Towards a Complete Picture of Stationary Covariance Functions on Spheres Cross Time

Authors: Philip White, Emilio Porcu

Abstract: With the advent of wide-spread global and continental-scale spatiotemporal datasets, increased attention has been given to covariance functions on spheres over time. This paper provides results for stationary covariance functions of random fields defined over $d$-dimensional spheres cross time. Specifically, we provide a bridge between the characterization in \cite{berg-porcu} for covariance funct… ▽ More With the advent of wide-spread global and continental-scale spatiotemporal datasets, increased attention has been given to covariance functions on spheres over time. This paper provides results for stationary covariance functions of random fields defined over $d$-dimensional spheres cross time. Specifically, we provide a bridge between the characterization in \cite{berg-porcu} for covariance functions on spheres cross time and Gneiting's lemma \citep{gneiting2002} that deals with planar surfaces. We then prove that there is a valid class of covariance functions similar in form to the Gneiting class of space-time covariance functions \citep{gneiting2002} that replaces the squared Euclidean distance with the great circle distance. Notably, the provided class is shown to be positive definite on every $d$-dimensional sphere cross time, while the Gneiting class is positive definite over $\R^d \times \R$ for fixed $d$ only. In this context, we illustrate the value of our adapted Gneiting class by comparing examples from this class to currently established nonseparable covariance classes using out-of-sample predictive criteria. These comparisons are carried out on two climate reanalysis datasets from the National Centers for Environmental Prediction and National Center for Atmospheric Research. For these datasets, we show that examples from our covariance class have better predictive performance than competing models. △ Less

Submitted 13 June, 2019; v1 submitted 11 July, 2018; originally announced July 2018.

Journal ref: The Electronic Journal of Statistics, 13(2), 2566-2594, (2019)

Pollution State Modeling for Mexico City

Authors: Philip A. White, Alan E. Gelfand, Eliane R. Rodrigues, Guadalupe Tzintzun

Abstract: Ground-level ozone and particulate matter pollutants are associated with a variety of health issues and increased mortality. For this reason, Mexican environmental agencies regulate pollutant levels. In addition, Mexico City defines pollution emergencies using thresholds that rely on regional maxima for ozone and particulate matter with diameter less than 10 micrometers ($\text{PM}_{10}$). To pred… ▽ More Ground-level ozone and particulate matter pollutants are associated with a variety of health issues and increased mortality. For this reason, Mexican environmental agencies regulate pollutant levels. In addition, Mexico City defines pollution emergencies using thresholds that rely on regional maxima for ozone and particulate matter with diameter less than 10 micrometers ($\text{PM}_{10}$). To predict local pollution emergencies and to assess compliance to Mexican ambient air quality standards, we analyze hourly ozone and $\text{PM}_{10}$ measurements from 24 stations across Mexico City from 2017 using a bivariate spatiotemporal model. Using this model, we predict future pollutant levels using current weather conditions and recent pollutant concentrations. Using hourly pollutant projections, we predict regional maxima needed to estimate the probability of future pollution emergencies. We discuss how predicted compliance to legislated pollution limits varies across regions within Mexico City in 2017. We find that predicted probability of pollution emergencies is limited to a few time periods. In contrast, we show that predicted exceedance of Mexican ambient air quality standards is a common, nearly daily occurrence. △ Less

Submitted 10 July, 2018; originally announced July 2018.

Journal ref: J. R. Stat. Soc. A., 182(3), 1039-1060 (2019)

The Two Faces of Capacitance: New Interpretations for Electrical Impedance Measurements of Perovskite Solar Cells and Their Relation to Hysteresis

Authors: Daniel A. Jacobs, He** Shen, Florian Pfeffer, Jun Peng, Thomas P. White, Fiona J. Beck, Kylie R. Catchpole

Abstract: Perovskite solar cells are notorious for exhibiting transient behaviour not seen in conventional inorganic semiconductor devices. Significant inroads have been made into understanding this fact in terms of rapid ion migration, now a well-established property of the prototype photovoltaic perovskite MAPbI$_3$ and strongly implicated in the newer mixed compositions. Here we study the manifestations… ▽ More Perovskite solar cells are notorious for exhibiting transient behaviour not seen in conventional inorganic semiconductor devices. Significant inroads have been made into understanding this fact in terms of rapid ion migration, now a well-established property of the prototype photovoltaic perovskite MAPbI$_3$ and strongly implicated in the newer mixed compositions. Here we study the manifestations of ion migration in frequency-domain small-signal measurements, focusing on the popular technique of Electrical Impedance Spectroscopy (EIS). We provide new interpretations for a variety of previously puzzling features, including giant photo-induced low-frequency capacitance and negative capacitance in a variety of forms. We show that these apparently strange measurements can be rationalized by the splitting of AC current into two components, one associated with charge-storage, and the other with the quasi-steady-state recombination current of electrons and holes. The latter contribution to the capacitance can take either a positive or a negative sign, and is potentially very large when slow, voltage-sensitive processes such as ion migration are at play. Using numerical drift-diffusion semiconductor models, we show that giant photo-induced capacitance, inductive loop features, and low-frequency negative capacitance all emerge naturally as consequences of ion migration via its coupling to quasi-steady-state electron and hole currents. In doing so, we unify the understanding of EIS measurements with the comparably well-developed theory of rate dependent current-voltage (I-V) measurements in perovskite cells. Comparing the two techniques, we argue that EIS is more suitable for quantifying I-V hysteresis than conventional methods based on I-V sweeps, and demonstrate this application on a variety of cell types. △ Less

Submitted 4 December, 2018; v1 submitted 2 July, 2018; originally announced July 2018.

Comments: Fixed typos and amended the axes on Figure 3 for clarity

Effect of Meltdown and Spectre Patches on the Performance of HPC Applications

Authors: Nikolay A. Simakov, Martins D. Innus, Matthew D. Jones, Joseph P. White, Steven M. Gallo, Robert L. DeLeon, Thomas R. Furlani

Abstract: In this work we examine how the updates addressing Meltdown and Spectre vulnerabilities impact the performance of HPC applications. To study this we use the application kernel module of XDMoD to test the performance before and after the application of the vulnerability patches. We tested the performance difference for multiple application and benchmarks including: NWChem, NAMD, HPCC, IOR, MDTest a… ▽ More In this work we examine how the updates addressing Meltdown and Spectre vulnerabilities impact the performance of HPC applications. To study this we use the application kernel module of XDMoD to test the performance before and after the application of the vulnerability patches. We tested the performance difference for multiple application and benchmarks including: NWChem, NAMD, HPCC, IOR, MDTest and IMB. The results show that although some specific functions can have performance decreased by as much as 74%, the majority of individual metrics indicates little to no decrease in performance. The real-world applications show a 2-3% decrease in performance for single node jobs and a 5-11% decrease for parallel multi node jobs. △ Less

Submitted 16 January, 2018; v1 submitted 12 January, 2018; originally announced January 2018.

A Workload Analysis of NSF's Innovative HPC Resources Using XDMoD

Authors: Nikolay A. Simakov, Joseph P. White, Robert L. DeLeon, Steven M. Gallo, Matthew D. Jones, Jeffrey T. Palmer, Benjamin Plessinger, Thomas R. Furlani

Abstract: Workload characterization is an integral part of performance analysis of high performance computing (HPC) systems. An understanding of workload properties sheds light on resource utilization and can be used to inform performance optimization both at the software and system configuration levels. It can provide information on how computational science usage modalities are changing that could potenti… ▽ More Workload characterization is an integral part of performance analysis of high performance computing (HPC) systems. An understanding of workload properties sheds light on resource utilization and can be used to inform performance optimization both at the software and system configuration levels. It can provide information on how computational science usage modalities are changing that could potentially aid holistic capacity planning for the wider HPC ecosystem. Here, we report on the results of a detailed workload analysis of the portfolio of supercomputers comprising the NSF Innovative HPC program in order to characterize its past and current workload and look for trends to understand the nature of how the broad portfolio of computational science research is being supported and how it is changing over time. The workload analysis also sought to illustrate a wide variety of usage patterns and performance requirements for jobs running on these systems. File system performance, memory utilization and the types of parallelism employed by users (MPI, threads, etc) were also studied for all systems for which job level performance data was available. △ Less

Submitted 12 January, 2018; originally announced January 2018.

Comments: 93 pages, 82 figures, 19 tables

MSC Class: 68M14; 68M20; 68U20 ACM Class: I.6.3; J.2; J.3; J.4; J.5; K.6.4

An Inverse Normal Transformation Solution for the comparison of two samples that contain both paired observations and independent observations

Authors: Ben Derrick, Paul White, Deirdre Toher

Abstract: Inverse normal transformations applied to the partially overlap** samples t-tests by Derrick et.al. (2017) are considered for their Type I error robustness and power. The inverse normal transformation solutions proposed in this paper are shown to maintain Type I error robustness. For increasing degrees of skewness they also offer improved power relative to the parametric partially overlap** sa… ▽ More Inverse normal transformations applied to the partially overlap** samples t-tests by Derrick et.al. (2017) are considered for their Type I error robustness and power. The inverse normal transformation solutions proposed in this paper are shown to maintain Type I error robustness. For increasing degrees of skewness they also offer improved power relative to the parametric partially overlap** samples t-tests. The power when using inverse normal transformation solutions are comparable to rank based non-parametric solutions. △ Less

Submitted 1 August, 2017; originally announced August 2017.

Comments: Inverse Normal Transformations Partially overlap** samples

Workload Analysis of Blue Waters

Authors: Matthew D. Jones, Joseph P. White, Martins Innus, Robert L. DeLeon, Nikolay Simakov, Jeffrey T. Palmer, Steven M. Gallo, Thomas R. Furlani, Michael Showerman, Robert Brunner, Andry Kot, Gregory Bauer, Brett Bode, Jeremy Enos, William Kramer

Abstract: Blue Waters is a Petascale-level supercomputer whose mission is to enable the national scientific and research community to solve "grand challenge" problems that are orders of magnitude more complex than can be carried out on other high performance computing systems. Given the important and unique role that Blue Waters plays in the U.S. research portfolio, it is important to have a detailed unders… ▽ More Blue Waters is a Petascale-level supercomputer whose mission is to enable the national scientific and research community to solve "grand challenge" problems that are orders of magnitude more complex than can be carried out on other high performance computing systems. Given the important and unique role that Blue Waters plays in the U.S. research portfolio, it is important to have a detailed understanding of its workload in order to guide performance optimization both at the software and system configuration level as well as inform architectural balance tradeoffs. Furthermore, understanding the computing requirements of the Blue Water's workload (memory access, IO, communication, etc.), which is comprised of some of the most computationally demanding scientific problems, will help drive changes in future computing architectures, especially at the leading edge. With this objective in mind, the project team carried out a detailed workload analysis of Blue Waters. △ Less

Submitted 2 March, 2017; originally announced March 2017.

Comments: 107 pages, >100 figures (figure sizes reduced to save space, contact authors for version with full resolution)

MSC Class: 68M14; 68M20; 68U20 ACM Class: I.6.3; J.2; J.3; J.4; J.5; K.6.4

Modeling Efficiency of Foreign Aid Allocation in Malawi

Authors: Philip A. White, Candace Berrett, E. Shannon Neeley-Tass, Michael G. Findley

Abstract: The Open Aid Malawi initiative has collected an unprecedented database that identifies as much location-specific information as possible for each of over 2500 individual foreign aid donations to Malawi since 2003. Ensuring efficient use and distribution of that aid is important to donors and to Malawi citizens. However, because of individual donor goals and difficulty in tracking donor coordinatio… ▽ More The Open Aid Malawi initiative has collected an unprecedented database that identifies as much location-specific information as possible for each of over 2500 individual foreign aid donations to Malawi since 2003. Ensuring efficient use and distribution of that aid is important to donors and to Malawi citizens. However, because of individual donor goals and difficulty in tracking donor coordination, determining presence or absence of efficient aid allocation is difficult. We compare several Bayesian spatial generalized linear mixed models to relate aid allocation to various economic indicators within seven donation sectors. We find that the spatial gamma regression model best predicts current aid allocation. Using this model, first we use inferences on coefficients to examine whether or not there is evidence of efficient aid allocation within each sector. Second, we use this model to determine a more efficient aid allocation scenario and compare this scenario to the current allocation to provide insight for future aid donations. △ Less

Submitted 1 November, 2017; v1 submitted 9 August, 2016; originally announced August 2016.

Journal ref: The American Statistician, 73(4), 385-399, (2018)

Total absorption of visible light in ultra-thin weakly-absorbing semiconductor gratings

Authors: Björn C. P. Sturmberg, Teck K. Chong, Duk-Yong Choi, Thomas P. White, Lindsay C. Botten, Kokou B. Dossou, Christopher G. Poulton, Kylie R. Catchpole, Ross C. McPhedran, C. Martijn de Sterke

Abstract: The perfect absorption of light in subwavelength thickness layers generally relies on exotic materials, metamaterials or thick metallic gratings. Here we demonstrate that total light absorption can be achieved in ultra-thin gratings composed of conventional materials, including relatively weakly-absorbing semiconductors, which are compatible with optoelectronic applications such as photodetectors… ▽ More The perfect absorption of light in subwavelength thickness layers generally relies on exotic materials, metamaterials or thick metallic gratings. Here we demonstrate that total light absorption can be achieved in ultra-thin gratings composed of conventional materials, including relatively weakly-absorbing semiconductors, which are compatible with optoelectronic applications such as photodetectors and optical modulators. We fabricate a 41 nm thick antimony sulphide grating structure that has a measured absorptance of A = 99.3% at a visible wavelength of 591 nm, in excellent agreement with theory. We infer that the absorption within the grating is A = 98.7%, with only A = 0.6% within the silver mirror. A planar reference sample absorbs A = 7.7% at this wavelength. △ Less

Submitted 15 February, 2016; originally announced February 2016.

Observation of nonlinear thermal optical dynamics in a chalcogenide nanobeam cavity

Authors: Yue Sun, Thomas P. White, Duk-Yong Choi, Andrey A. Sukhorukov

Abstract: We present a theoretical and experimental analysis of nonlinear thermo-optic effects in suspended chalcogenide glass nanobeam cavities. We measure the power dependent resonance peaks and characterise the dynamic nonlinear thermo-optic response of the cavity under modulated light input. Several distinct nonlinear characteristics are identified, including a modified spectral response containing peri… ▽ More We present a theoretical and experimental analysis of nonlinear thermo-optic effects in suspended chalcogenide glass nanobeam cavities. We measure the power dependent resonance peaks and characterise the dynamic nonlinear thermo-optic response of the cavity under modulated light input. Several distinct nonlinear characteristics are identified, including a modified spectral response containing periodic fringes, a critical wavelength jump and saturated time delay for modulation frequency faster than the thermal characteristic time. We reveal that the coupling to a parasitic Fabry-Perot cavity enables isolated thermal equilibrium states resulting in the discontinuous thermo-optic critical point. △ Less

Submitted 8 February, 2016; originally announced February 2016.

Comments: 4 figures and 1 table

The SiD Detector for the International Linear Collider

Authors: Andrew P. White

Abstract: The SiD Detector is one of two validated detector designs for the future International Linear Collider. SiD features a compact, cost-constrained design for precision Higgs couplings determination, and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a 5 Tesla central solenoidal field, provides excellent moment… ▽ More The SiD Detector is one of two validated detector designs for the future International Linear Collider. SiD features a compact, cost-constrained design for precision Higgs couplings determination, and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a 5 Tesla central solenoidal field, provides excellent momentum resolution. The highly granular calorimeter system is optimized for Particle Flow application to achieve very good jet energy resolution over a wide range of energies. Details of the proposed implementation of the SiD subsystems, as driven by the physics requirements, will be given. The shared interaction point, push-pull mechanism, will be described, together with the estimated timeline for construction. △ Less

Submitted 31 October, 2015; originally announced November 2015.

Comments: 9 pages, 10 figures, APS DPF Conference 2015