Showing 1–17 of 17 results for author: White, J K

A hybrid volume-surface integral equation method for rapid electromagnetic simulations in MRI

Authors: Ilias I. Giannakopoulos, Georgy D. Guryev, José E. C. Serrallés, Jan Paška, Bei Zhang, Luca Daniel, Jacob K. White, Christopher M. Collins, Riccardo Lattanzi

Abstract: Objective: We developed a hybrid volume surface integral equation (VSIE) method based on domain decomposition to perform fast and accurate magnetic resonance imaging (MRI) simulations that include both remote and local conductive elements. Methods: We separated the conductive surfaces present in MRI setups into two domains and optimized electromagnetic (EM) modeling for each case. Specifically, in… ▽ More Objective: We developed a hybrid volume surface integral equation (VSIE) method based on domain decomposition to perform fast and accurate magnetic resonance imaging (MRI) simulations that include both remote and local conductive elements. Methods: We separated the conductive surfaces present in MRI setups into two domains and optimized electromagnetic (EM) modeling for each case. Specifically, interactions between the body and EM waves originating from local radiofrequency (RF) coils were modeled with the precorrected fast Fourier transform, whereas the interactions with remote conductive surfaces (RF shield, scanner bore) were modeled with a novel cross tensor train-based algorithm. We compared the hybrid- VSIE with other VSIE methods for realistic MRI simulation setups. Results: The hybrid-VSIE was the only practical method for simulation using 1 mm voxel isotropic resolution (VIR). For 2 mm VIR, our method could be solved at least 23 times faster and required 760 times lower memory than traditional VSIE methods. Conclusion: The hybrid-VSIE demonstrated a marked improvement in terms of convergence times of the numerical EM simulation compared to traditional approaches in multiple realistic MRI scenarios. Significance: The efficiency of the novel hybrid-VSIE method could enable rapid simulations of complex and comprehensive MRI setups. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Comments: 10 pages, 6 figures

Compression of volume-surface integral equation matrices via Tucker decomposition for magnetic resonance applications

Authors: Ilias I. Giannakopoulos, Georgy D. Guryev, Jose E. C. Serralles, Ioannis P. Georgakis, Luca Daniel, Jacob K. White, Riccardo Lattanzi

Abstract: In this work, we propose a method for the compression of the coupling matrix in volume\hyp surface integral equation (VSIE) formulations. VSIE methods are used for electromagnetic analysis in magnetic resonance imaging (MRI) applications, for which the coupling matrix models the interactions between the coil and the body. We showed that these effects can be represented as independent interactions… ▽ More In this work, we propose a method for the compression of the coupling matrix in volume\hyp surface integral equation (VSIE) formulations. VSIE methods are used for electromagnetic analysis in magnetic resonance imaging (MRI) applications, for which the coupling matrix models the interactions between the coil and the body. We showed that these effects can be represented as independent interactions between remote elements in 3D tensor formats, and subsequently decomposed with the Tucker model. Our method can work in tandem with the adaptive cross approximation technique to provide fast solutions of VSIE problems. We demonstrated that our compression approaches can enable the use of VSIE matrices of prohibitive memory requirements, by allowing the effective use of modern graphical processing units (GPUs) to accelerate the arising matrix\hyp vector products. This is critical to enable numerical MRI simulations at clinical voxel resolutions in a feasible computation time. In this paper, we demonstrate that the VSIE matrix\hyp vector products needed to calculate the electromagnetic field produced by an MRI coil inside a numerical body model with $1$ mm$^3$ voxel resolution, could be performed in $\sim 33$ seconds in a GPU, after compressing the associated coupling matrix from $\sim 80$ TB to $\sim 43$ MB. △ Less

Submitted 2 June, 2021; v1 submitted 10 March, 2021; originally announced March 2021.

Comments: 13 pages, 11 figures

VoxCap: FFT-Accelerated and Tucker-Enhanced Capacitance Extraction Simulator for Voxelized Structures

Authors: Mingyu Wang, Cheng Qian, Jacob K. White, Abdulkadir C. Yucel

Abstract: VoxCap, a fast Fourier transform (FFT)-accelerated and Tucker-enhanced integral equation simulator for capacitance extraction of voxelized structures, is proposed. The VoxCap solves the surface integral equations (SIEs) for conductor and dielectric surfaces with three key attributes that make the VoxCap highly CPU and memory efficient for the capacitance extraction of the voxelized structures: (i)… ▽ More VoxCap, a fast Fourier transform (FFT)-accelerated and Tucker-enhanced integral equation simulator for capacitance extraction of voxelized structures, is proposed. The VoxCap solves the surface integral equations (SIEs) for conductor and dielectric surfaces with three key attributes that make the VoxCap highly CPU and memory efficient for the capacitance extraction of the voxelized structures: (i) VoxCap exploits the FFTs for accelerating the matrix-vector multiplications during the iterative solution of linear system of equations arising due to the discretization of SIEs. (ii) During the iterative solution, VoxCap uses a highly effective and memory-efficient preconditioner that reduces the number of iterations significantly. (iii) VoxCap employs Tucker decompositions to compress the block Toeplitz and circulant tensors, requiring the largest memory in the simulator. By doing so, it reduces the memory requirement of these tensors from hundreds of gigabytes to a few megabytes and the CPU time required to obtain Toeplitz tensors from tens of minutes (even hours) to a few seconds for very large scale problems. VoxCap is capable of accurately computing capacitance of arbitrarily shaped and large-scale voxelized structures on a desktop computer. △ Less

Submitted 26 August, 2020; v1 submitted 2 April, 2020; originally announced April 2020.

Magnetic-resonance-based electrical property map** using Global Maxwell Tomography with an 8-channel head coil at 7 Tesla: a simulation study

Authors: Ilias I. Giannakopoulos, José E. C. Serrallés, Luca Daniel, Daniel K. Sodickson, Athanasios G. Polimeridis, Jacob K. White, Riccardo Lattanzi

Abstract: Objective: Global Maxwell Tomography (GMT) is a recently introduced volumetric technique for noninvasive estimation of electrical properties (EP) from magnetic resonance measurements. Previous work evaluated GMT using ideal radiofrequency (RF) excitations. The aim of this simulation study was to assess GMT performance with a realistic RF coil. Methods: We designed a transmit-receive RF coil with… ▽ More Objective: Global Maxwell Tomography (GMT) is a recently introduced volumetric technique for noninvasive estimation of electrical properties (EP) from magnetic resonance measurements. Previous work evaluated GMT using ideal radiofrequency (RF) excitations. The aim of this simulation study was to assess GMT performance with a realistic RF coil. Methods: We designed a transmit-receive RF coil with $8$ decoupled channels for $7$T head imaging. We calculated the RF transmit field ($B_1^+$) inside heterogeneous head models for different RF shimming approaches, and used them as input for GMT to reconstruct EP for all voxels. Results: Coil tuning/decoupling remained relatively stable when the coil was loaded with different head models. Mean error in EP estimation changed from $7.5\%$ to $9.5\%$ and from $4.8\%$ to $7.2\%$ for relative permittivity and conductivity, respectively, when changing head model without re-tuning the coil. Results slightly improved when an SVD-based RF shimming algorithm was applied, in place of excitation with one coil at a time. Despite errors in EP, RF transmit field ($B_1^+$) and absorbed power could be predicted with less than $0.5\%$ error over the entire head. GMT could accurately detect a numerically inserted tumor. Conclusion: This work demonstrates that GMT can reliably reconstruct EP in realistic simulated scenarios using a tailored 8-channel RF coil design at $7$T. Future work will focus on construction of the coil and optimization of GMT's robustness to noise, to enable in-vivo GMT experiments. Significance: GMT could provide accurate estimations of tissue EP, which could be used as biomarkers and could enable patient-specific estimation of RF power deposition, which is an unsolved problem for ultra-high-field magnetic resonance imaging. △ Less

Submitted 20 March, 2020; originally announced March 2020.

Comments: 12 pages, 18 figures

Preconditioning the discrete dipole approximation

Authors: Samuel P. Groth, Athanasios G. Polimeridis, Jacob K. White

Abstract: The discrete dipole approximation (DDA) is a popular numerical method for calculating the scattering properties of atmospheric ice crystals. The standard DDA formulation involves the uniform discretization of the underlying volume integral equation, leading to a linear system with a block-Toeplitz Toeplitz-block matrix. This structure permits a matrix-vector product to be performed with… ▽ More The discrete dipole approximation (DDA) is a popular numerical method for calculating the scattering properties of atmospheric ice crystals. The standard DDA formulation involves the uniform discretization of the underlying volume integral equation, leading to a linear system with a block-Toeplitz Toeplitz-block matrix. This structure permits a matrix-vector product to be performed with $\mathcal{O}(n\log n)$ complexity via the fast-Fourier transform (FFT). Thus, in principle, the system can be solved rapidly using an iterative method. However, it is well known that the convergence of iterative methods becomes increasing slow as the optical size and refractive index of the scattering obstacle are increased. In this paper, we present a preconditioning strategy based on the multi-level circulant preconditioner of Chan and Olkin and assess its performance for improving this rate of convergence. In particular, we approximate the system matrix by a block-circulant circulant-block matrix which can be inverted rapidly using the FFT. We present numerical results for scattering by hexagonal ice prisms demonstrating that this serves as an effective preconditioning strategy, reducing simulation times by orders of magnitude in many cases. A Matlab implementation of this work is freely available online. △ Less

Submitted 23 March, 2019; originally announced March 2019.

Circulant preconditioning in the volume integral equation method for silicon photonics

Authors: Samuel P. Groth, Athanasios G. Polimeridis, Alexandra Tambova, Jacob K. White

Abstract: Recently, the volume integral equation (VIE) approach has been proposed as an efficient simulation tool for silicon photonics applications [J. Lightw. Technol. 36, 3765 (2018)]. However, for the high-frequency and strong contrast problems arising in photonics, the convergence of iterative solvers for the solution of the linear system can be extremely slow. The uniform discretization of the volume… ▽ More Recently, the volume integral equation (VIE) approach has been proposed as an efficient simulation tool for silicon photonics applications [J. Lightw. Technol. 36, 3765 (2018)]. However, for the high-frequency and strong contrast problems arising in photonics, the convergence of iterative solvers for the solution of the linear system can be extremely slow. The uniform discretization of the volume integral operator leads to a three-level Toeplitz matrix, which is well suited to preconditioning via its circulant approximation. In this paper, we describe an effective circulant preconditioning strategy based on the multi-level circulant preconditioner of Chan and Olkin [Numer. Algorithms 6, 89 (1994)]. We show that this approach proves ideal in the canonical photonics problem of propagation within a uniform waveguide, in which the flow is unidirectional. For more complex photonics structures, such as Bragg gratings, directional couplers, and disk resonators, we generalize our preconditioning strategy via geometrical partitioning (leading to a block-diagonal circulant preconditioner) and homogenization (for inhomogeneous structures). Finally, we introduce a novel memory reduction technique enabling the preconditioner's memory footprint to remain manageable, even for extremely long structures. The range of numerical results we present demonstrates that the preconditioned VIE is fast and has great utility for the numerical exploration of prototype photonics devices. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Adiabatic absorbers in photonics simulations with the volume integral equation method

Authors: Alexandra Tambova, Samuel P. Groth, Jacob K. White, Athanasios G. Polimeridis

Abstract: This paper describes the implementation and performance of adiabatic absorbing layers in an FFT-accelerated volume integral equation (VIE) method for simulating truncated nanophotonics structures. At the truncation sites, we place absorbing regions in which the conductivity is increased gradually in order to minimize reflections. In the continuous setting, such adiabatic absorbers have been shown… ▽ More This paper describes the implementation and performance of adiabatic absorbing layers in an FFT-accelerated volume integral equation (VIE) method for simulating truncated nanophotonics structures. At the truncation sites, we place absorbing regions in which the conductivity is increased gradually in order to minimize reflections. In the continuous setting, such adiabatic absorbers have been shown via coupled-mode theory to produce reflections that diminish at a rate related to the smoothness of the absorption profile function. The VIE formulation we employ relies on uniform discretizations of the geometry over which the continuously varying fields and material properties are represented by piecewise constant functions. Such a discretization enables the acceleration of the method via the FFT and, furthermore, the introduction of varying absorption can be performed in a straightforward manner without compromising this speedup. We demonstrate that, in spite of the crude discrete approximation to the smooth absorption profiles, our approach recovers the theoretically predicted reflection behavior of adiabatic absorbers. We thereby show that the FFT-accelerated VIE method is an effective and fast simulation tool for nanophotonics simulations. △ Less

Submitted 16 March, 2018; originally announced March 2018.

Parameter Insensitivity in ADMM-Preconditioned Solution of Saddle-Point Problems

Authors: Richard Y. Zhang, Jacob K. White

Abstract: We consider the solution of linear saddle-point problems, using the alternating direction method-of-multipliers (ADMM) as a preconditioner for the generalized minimum residual method (GMRES). We show, using theoretical bounds and empirical results, that ADMM is made remarkably insensitive to the parameter choice with Krylov subspace acceleration. We prove that ADMM-GMRES can consistently converge,… ▽ More We consider the solution of linear saddle-point problems, using the alternating direction method-of-multipliers (ADMM) as a preconditioner for the generalized minimum residual method (GMRES). We show, using theoretical bounds and empirical results, that ADMM is made remarkably insensitive to the parameter choice with Krylov subspace acceleration. We prove that ADMM-GMRES can consistently converge, irrespective of the exact parameter choice, to an $ε$-accurate solution of a $κ$-conditioned problem in $O(κ^{2/3}\logε^{-1})$ iterations. The accelerated method is applied to randomly generated problems, as well as the Newton direction computation for the interior-point solution of semidefinite programs in the SDPLIB test suite. The empirical results confirm this parameter insensitivity, and suggest a slightly improved iteration bound of $O(\sqrtκ\logε^{-1})$. △ Less

Submitted 27 April, 2016; v1 submitted 5 February, 2016; originally announced February 2016.

Comments: 20 pages, 8 figures

GMRES-Accelerated ADMM for Quadratic Objectives

Authors: Richard Y. Zhang, Jacob K. White

Abstract: We consider the sequence acceleration problem for the alternating direction method-of-multipliers (ADMM) applied to a class of equality-constrained problems with strongly convex quadratic objectives, which frequently arise as the Newton subproblem of interior-point methods. Within this context, the ADMM update equations are linear, the iterates are confined within a Krylov subspace, and the Genera… ▽ More We consider the sequence acceleration problem for the alternating direction method-of-multipliers (ADMM) applied to a class of equality-constrained problems with strongly convex quadratic objectives, which frequently arise as the Newton subproblem of interior-point methods. Within this context, the ADMM update equations are linear, the iterates are confined within a Krylov subspace, and the General Minimum RESidual (GMRES) algorithm is optimal in its ability to accelerate convergence. The basic ADMM method solves a $κ$-conditioned problem in $O(\sqrtκ)$ iterations. We give theoretical justification and numerical evidence that the GMRES-accelerated variant consistently solves the same problem in $O(κ^{1/4})$ iterations for an order-of-magnitude reduction in iterations, despite a worst-case bound of $O(\sqrtκ)$ iterations. The method is shown to be competitive against standard preconditioned Krylov subspace methods for saddle-point problems. The method is embedded within SeDuMi, a popular open-source solver for conic optimization written in MATLAB, and used to solve many large-scale semidefinite programs with error that decreases like $O(1/k^{2})$, instead of $O(1/k)$, where $k$ is the iteration index. △ Less

Submitted 28 August, 2018; v1 submitted 22 January, 2016; originally announced January 2016.

Comments: 31 pages, 7 figures. Accepted for publication in SIAM Journal on Optimization (SIOPT)

Journal ref: SIAM J. Optim., 28(4): 3025-3056. 2018

Fluctuating volume-current formulation of electromagnetic fluctuations in inhomogeneous media: incandecence and luminescence in arbitrary geometries

Authors: Athanasios G. Polimeridis, M. T. Homer Reid, Weiliang **, Steven G. Johnson, Jacob K. White, Alejandro W. Rodriguezz

Abstract: We describe a fluctuating volume--current formulation of electromagnetic fluctuations that extends our recent work on heat exchange and Casimir interactions between arbitrarily shaped homogeneous bodies [Phys. Rev. B. 88, 054305] to situations involving incandescence and luminescence problems, including thermal radiation, heat transfer, Casimir forces, spontaneous emission, fluorescence, and Raman… ▽ More We describe a fluctuating volume--current formulation of electromagnetic fluctuations that extends our recent work on heat exchange and Casimir interactions between arbitrarily shaped homogeneous bodies [Phys. Rev. B. 88, 054305] to situations involving incandescence and luminescence problems, including thermal radiation, heat transfer, Casimir forces, spontaneous emission, fluorescence, and Raman scattering, in inhomogeneous media. Unlike previous scattering formulations based on field and/or surface unknowns, our work exploits powerful techniques from the volume--integral equation (VIE) method, in which electromagnetic scattering is described in terms of volumetric, current unknowns throughout the bodies. The resulting trace formulas (boxed equations) involve products of well-studied VIE matrices and describe power and momentum transfer between objects with spatially varying material properties and fluctuation characteristics. We demonstrate that thanks to the low-rank properties of the associatedmatrices, these formulas are susceptible to fast-trace computations based on iterative methods, making practical calculations tractable. We apply our techniques to study thermal radiation, heat transfer, and fluorescence in complicated geometries, checking our method against established techniques best suited for homogeneous bodies as well as applying it to obtain predictions of radiation from complex bodies with spatially varying permittivities and/or temperature profiles. △ Less

Submitted 19 May, 2015; originally announced May 2015.

Journal ref: Phys. Rev. B 92, 134202 (2015)

On the Computation of Power in Volume Integral Equation Formulations

Authors: A. G. Polimeridis, M. T. H. Reid, S. G. Johnson, J. K. White, A. W. Rodriguez

Abstract: We present simple and stable formulas for computing power (including absorbed/radiated, scattered and extinction power) in current-based volume integral equation formulations. The proposed formulas are given in terms of vector-matrix-vector products of quantities found solely in the associated linear system. In addition to their efficiency, the derived expressions can guarantee the positivity of t… ▽ More We present simple and stable formulas for computing power (including absorbed/radiated, scattered and extinction power) in current-based volume integral equation formulations. The proposed formulas are given in terms of vector-matrix-vector products of quantities found solely in the associated linear system. In addition to their efficiency, the derived expressions can guarantee the positivity of the computed power. We also discuss the application of Poynting's theorem for the case of sources immersed in dissipative materials. The formulas are validated against results obtained both with analytical and numerical methods for scattering and radiation benchmark cases. △ Less

Submitted 12 September, 2014; v1 submitted 27 June, 2014; originally announced June 2014.

Generalized Taylor-Duffy Method for Efficient Evaluation of Galerkin Integrals in Boundary-Element Method Computations

Authors: M. T. Homer Reid, Steven G. Johnson, Jacob K. White

Abstract: We present a generic technique, automated by computer-algebra systems and available as open-source software \cite{scuff-em}, for efficient numerical evaluation of a large family of singular and nonsingular 4-dimensional integrals over triangle-product domains, such as those arising in the boundary-element method (BEM) of computational electromagnetism. To date, practical implementation of BEM solv… ▽ More We present a generic technique, automated by computer-algebra systems and available as open-source software \cite{scuff-em}, for efficient numerical evaluation of a large family of singular and nonsingular 4-dimensional integrals over triangle-product domains, such as those arising in the boundary-element method (BEM) of computational electromagnetism. To date, practical implementation of BEM solvers has often required the aggregation of multiple disparate integral-evaluation schemes to treat all of the distinct types of integrals needed for a given BEM formulation; in contrast, our technique allows many different types of integrals to be handled by the \emph{same} algorithm and the same code implementation. Our method is a significant generalization of the Taylor--Duffy approach \cite{Taylor2003,Duffy1982}, which was originally presented for just a single type of integrand; in addition to generalizing this technique to a broad class of integrands, we also achieve a significant improvement in its efficiency by showing how the \emph{dimension} of the final numerical integral may often be reduced by one. In particular, if $n$ is the number of common vertices between the two triangles, in many cases we can reduce the dimension of the integral from $4-n$ to $3-n$, obtaining a closed-form analytical result for $n=3$ (the common-triangle case). △ Less

Submitted 19 July, 2014; v1 submitted 5 December, 2013; originally announced December 2013.

Comments: Revised version containing a rearrangement of the text and updates to figures

Journal ref: IEEE Transactions on Antennas and Propagation 63 1 (2015) 195-209

On the use of rational-function fitting methods for the solution of 2D Laplace boundary-value problems

Authors: Amit Hochman, Yehuda Leviatan, Jacob K. White

Abstract: A computational scheme for solving 2D Laplace boundary-value problems using rational functions as the basis functions is described. The scheme belongs to the class of desingularized methods, for which the location of singularities and testing points is a major issue that is addressed by the proposed scheme, in the context of the 2D Laplace equation. Well-established rational-function fitting techn… ▽ More A computational scheme for solving 2D Laplace boundary-value problems using rational functions as the basis functions is described. The scheme belongs to the class of desingularized methods, for which the location of singularities and testing points is a major issue that is addressed by the proposed scheme, in the context of the 2D Laplace equation. Well-established rational-function fitting techniques are used to set the poles, while residues are determined by enforcing the boundary conditions in the least-squares sense at the nodes of rational Gauss-Chebyshev quadrature rules. Numerical results show that errors approaching the machine epsilon can be obtained for sharp and almost sharp corners, nearly-touching boundaries, and almost-singular boundary data. We show various examples of these cases in which the method yields compact solutions, requiring fewer basis functions than the Nyström method, for the same accuracy. A scheme for solving fairly large-scale problems is also presented. △ Less

Submitted 29 June, 2012; v1 submitted 7 December, 2011; originally announced December 2011.

Estimating Reaction Rate Parameters in Cell Signaling Pathways Using Extreme Decomposition and Belief Propagation Tailored for Data-Rich Cases

Authors: Tri Hieu Nim, Le Luo, Marie-Véronique Clément, Jacob K. White, Lisa Tucker-Kellogg

Abstract: Motivation: Modeling biological signaling networks using ordinary differential equations (ODEs) has proven to be a powerful technique for generating insight into cellular dynamics, but it typically requires estimating rate parameters based on experimentally observed concentrations. New measurement methods can measure concentrations for all molecular species in a pathway, which creates a new opport… ▽ More Motivation: Modeling biological signaling networks using ordinary differential equations (ODEs) has proven to be a powerful technique for generating insight into cellular dynamics, but it typically requires estimating rate parameters based on experimentally observed concentrations. New measurement methods can measure concentrations for all molecular species in a pathway, which creates a new opportunity to decompose the optimization of rate parameters. Results: In contrast with conventional methods that minimize the disagreement between simulated and observed concentrations, the BPPE method fits a spline curve through the observed concentration points, and then matches the derivatives of the spline-curve to the production and consumption of each species. Whereas traditional methods follow the ODEs exactly and then attempt to match the data, BPPE follows the data exactly and then attempts to match the ODEs. The new objective function is an extreme decomposition of the problem because each factor in the function is enforcing the equality of one ODE at one timeslice. A "loopy belief propagation" algorithm solves this factorized approximation of the parameter estimation problem providing systematic coverage of the search space and unique asymptotic behavior; the run time is polynomial in the number of molecules and timepoints, but exponential in the degree of the biochemical network. The implementation is a global-local hybrid optimization, and we compare with the performance of local, global, and hybrid methods. BPPE is demonstrated for a novel model of Akt activation dynamics including redox-mediated inactivation of PTEN. Availability: Software and supplementary information are available at http://webbppe.nus.edu.sg:8080/opal2/WebBPPE . Contact: [email protected] . Keywords: probabilistic graphical models, physico-chemical modeling, systems biology, signal transduction. △ Less

Submitted 4 March, 2011; originally announced March 2011.

Comments: 11 pages, 9 figures, 1 table

Calculation of nonzero-temperature Casimir forces in the time domain

Authors: Kai Pan, Alexander P. McCauley, Alejandro W. Rodriguez, M. T. Homer Reid, Jacob K. White, Steven G. Johnson

Abstract: We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against… ▽ More We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against analytical and numerical frequency-domain calculations, and show a surprising high-temperature disappearance of a non-monotonic behavior previously demonstrated in a piston-like geometry. △ Less

Submitted 21 November, 2010; originally announced November 2010.

Comments: 5 pages, 2 figures, submitted to Physical Review A Rapid Communication

A novel boundary element method using surface conductive absorbers for full-wave analysis of 3-D nanophotonics

Authors: Lei Zhang, Jung Hoon Lee, Ardavan Oskooi, Amit Hochman, Jacob K. White, Steven G. Johnson

Abstract: Fast surface integral equation (SIE) solvers seem to be ideal approaches for simulating 3-D nanophotonic devices, as these devices generate fields both in an interior channel and in the infinite exterior domain. However, many devices of interest, such as optical couplers, have channels that can not be terminated without generating reflections. Generating absorbers for these channels is a new prob… ▽ More Fast surface integral equation (SIE) solvers seem to be ideal approaches for simulating 3-D nanophotonic devices, as these devices generate fields both in an interior channel and in the infinite exterior domain. However, many devices of interest, such as optical couplers, have channels that can not be terminated without generating reflections. Generating absorbers for these channels is a new problem for SIE methods, as the methods were initially developed for problems with finite surfaces. In this paper we show that the obvious approach for eliminating reflections, making the channel mildly conductive outside the domain of interest, is inaccurate. We describe a new method, in which the absorber has a gradually increasing surface conductivity; such an absorber can be easily incorporated in fast integral equation solvers. Numerical experiments from a surface-conductivity modified FFT-accelerated PMCHW-based solver are correlated with analytic results, demonstrating that this new method is orders of magnitude more effective than a volume absorber, and that the smoothness of the surface conductivity function determines the performance of the absorber. In particular, we show that the magnitude of the transition reflection is proportional to 1/L^(2d+2), where L is the absorber length and d is the order of the differentiability of the surface conductivity function. △ Less

Submitted 28 April, 2010; originally announced April 2010.

Comments: 10 pages

Synchronization and multi-mode dynamics of mutually coupled semiconductor lasers

Authors: Claudio R. Mirasso, Miroslav Kolesik, Marcelo Matus, J. K. White, Jerome V. Moloney

Abstract: Dynamics of coupled semiconductor lasers is investigated by numerical simulations. A realistic laser simulation engine is used to study the synchronization and dynamical regime in two mutually coupled Fabry-Perot and/or DFB lasers. Both, single- and multi-mode operation regimes are studied with emphasis on the role of the multiple laser-cavity modes. Our findings indicate that the two laser sync… ▽ More Dynamics of coupled semiconductor lasers is investigated by numerical simulations. A realistic laser simulation engine is used to study the synchronization and dynamical regime in two mutually coupled Fabry-Perot and/or DFB lasers. Both, single- and multi-mode operation regimes are studied with emphasis on the role of the multiple laser-cavity modes. Our findings indicate that the two laser synchronize within each laser-cavity mode, while the synchronization across different cavity modes is significantly weaker. △ Less

Submitted 20 April, 2001; originally announced April 2001.

Comments: 5 pages (PS) and 6 Figures. Also available at http://www.imedea.uib.es/PhysDept/publicationsDB/date.html