-
On-chip Kerr parametric oscillation with integrated heating for enhanced frequency tuning and control
Authors:
Jordan Stone,
Daron Westly,
Gregory Moille,
Kartik Srinivasan
Abstract:
Nonlinear microresonators can convert light from chip-integrated sources into new wavelengths within the visible and near-infrared spectrum. For most applications, such as the interrogation of quantum systems with specific transition wavelengths, tuning the frequency of converted light is critical. Nonetheless, demonstrations of wavelength conversion have mostly overlooked this metric. Here, we ap…
▽ More
Nonlinear microresonators can convert light from chip-integrated sources into new wavelengths within the visible and near-infrared spectrum. For most applications, such as the interrogation of quantum systems with specific transition wavelengths, tuning the frequency of converted light is critical. Nonetheless, demonstrations of wavelength conversion have mostly overlooked this metric. Here, we apply efficient integrated heaters to tune the idler frequency produced by Kerr optical parametric oscillation in a silicon-nitride microring across a continuous 1.5 terahertz range. Finally, we suppress idler frequency noise between DC and 5 kHz by several orders of magnitude using feedback to the heater drive.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Strong interactions between integrated microresonators and alkali atomic vapors: towards single-atom, single-photon operation
Authors:
Roy Zektzer,
Xiyuan Lu,
Khoi Tuan Hoang,
Rahul Shrestha,
Sharoon Austin,
Feng Zhou,
Ashish Chanana,
Glenn Holland,
Daron Westly,
Paul Lett,
Alexey V. Gorshkov,
Kartik Srinivasan
Abstract:
Cavity quantum electrodynamics (cQED), the interaction of a two-level system with a high quality factor (Q) cavity, is a foundational building block in different architectures for quantum computation, communication, and metrology. The strong interaction between the atom and the cavity enables single photon operation which is required for quantum gates and sources. Cold atoms, quantum dots, and col…
▽ More
Cavity quantum electrodynamics (cQED), the interaction of a two-level system with a high quality factor (Q) cavity, is a foundational building block in different architectures for quantum computation, communication, and metrology. The strong interaction between the atom and the cavity enables single photon operation which is required for quantum gates and sources. Cold atoms, quantum dots, and color centers in crystals are amongst the systems that have shown single photon operations, but they require significant physical infrastructure. Atomic vapors, on the other hand, require limited experimental infrastructure and are hence much easier to deploy outside a laboratory, but they produce an ensemble of moving atoms that results in short interaction times involving multiple atoms, which can hamper quantum operations. A solution to this issue can be found in nanophotonic cavities, where light-matter interaction is enhanced and the volume of operation is small, so that fast single-atom, single-photon operations are enabled. In this work, we study the interaction of an atomically-clad microring resonator (ACMRR) with different-sized ensembles of Rb atoms. We demonstrate strong coupling between an ensemble of ~50 atoms interacting with a high-quality factor (Q > 4 x 10^5) ACMRR, yielding a many-atom cooperativity C ~ 5.5. We continue to observe signatures of atom-photon interaction for a few (< 3) atoms, for which we observe saturation at the level of one intracavity photon. Further development of our platform, which includes integrated thermo-optic heaters to enable cavity tuning and stabilization, should enable the observation of interactions between single photons and single atoms.
△ Less
Submitted 5 April, 2024;
originally announced April 2024.
-
Broadband Visible Wavelength Microcomb Generation In Silicon Nitride Microrings Through Air-Clad Dispersion Engineering
Authors:
Gregory Moille,
Daron Westly,
Kartik Srinivasan
Abstract:
The development of broadband microresonator frequency combs at visible wavelengths is pivotal for the advancement of compact and fieldable optical atomic clocks and spectroscopy systems. Yet, their realization necessitates resonators with anomalous dispersion, an arduous task due to the prevailing normal dispersion regime of materials within the visible spectrum. In this work, we evince that silic…
▽ More
The development of broadband microresonator frequency combs at visible wavelengths is pivotal for the advancement of compact and fieldable optical atomic clocks and spectroscopy systems. Yet, their realization necessitates resonators with anomalous dispersion, an arduous task due to the prevailing normal dispersion regime of materials within the visible spectrum. In this work, we evince that silicon nitride microring resonators with air cladding on top and sides -- a deviation from the frequently employed silica-embedded resonators -- allows for the direct generation of broadband microcombs in the visible range. We experimentally demonstrate combs pumped at 1060~nm (283~THz) that reach wavelengths as short as 680~nm (440 THz), and combs pumped at 780~nm (384 THz) that reach wavelengths as short as 630 nm (475 THz). We further show through simulations that microcombs extending to wavelengths as low as 461 nm (650 THz) should be accessible in this platform.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Sub-Doppler spectroscopy of quantum systems through nanophotonic spectral translation of electro-optic light
Authors:
David A. Long,
Jordan R. Stone,
Yi Sun,
Daron Westly,
Kartik Srinivasan
Abstract:
An outstanding challenge for deployable quantum technologies is the availability of high-resolution laser spectroscopy at the specific wavelengths of ultranarrow transitions in atomic and solid-state quantum systems. Here, we demonstrate a powerful spectroscopic tool that synergistically combines high resolution with flexible wavelength access, by showing that nonlinear nanophotonics can be readil…
▽ More
An outstanding challenge for deployable quantum technologies is the availability of high-resolution laser spectroscopy at the specific wavelengths of ultranarrow transitions in atomic and solid-state quantum systems. Here, we demonstrate a powerful spectroscopic tool that synergistically combines high resolution with flexible wavelength access, by showing that nonlinear nanophotonics can be readily pumped with electro-optic frequency combs to enable highly coherent spectral translation with essentially no efficiency loss. Third-order (\c{hi}(3)) optical parametric oscillation in a silicon nitride microring enables nearly a million optical frequency comb pump teeth to be translated onto signal and idler beams; while the comb tooth spacing and bandwidth are adjustable through electro-optic control, the signal and idler carrier frequencies are widely tuneable through dispersion engineering. We then demonstrate the application of these devices to quantum systems, by performing sub-Doppler spectroscopy of the hyperfine transitions of a Cs atomic vapor with our electro-optically-driven Kerr nonlinear light source. The generality, robustness, and agility of this approach as well as its compatibility with photonic integration are expected to lead to its widespread applications in areas such as quantum sensing, telecommunications, and atomic clocks.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Scalable and Robust Beam Sha** Using Apodized Fish-bone Grating Couplers
Authors:
Chad Ropp,
Dhriti Maurya,
Alexander Yulaev,
Daron Westly,
Gregory Simelgor,
Vladimir Aksyuk
Abstract:
Efficient power coupling between on-chip guided and free-space optical modes requires precision spatial mode matching with apodized grating couplers. Yet, grating apodizations are often limited by the minimum feature size of the fabrication approach. This is especially challenging when small feature sizes are required to fabricate gratings at short wavelengths or to achieve weakly scattered light…
▽ More
Efficient power coupling between on-chip guided and free-space optical modes requires precision spatial mode matching with apodized grating couplers. Yet, grating apodizations are often limited by the minimum feature size of the fabrication approach. This is especially challenging when small feature sizes are required to fabricate gratings at short wavelengths or to achieve weakly scattered light for large-area gratings. Here, we demonstrate a fish-bone grating coupler for precision beam sha** and the generation of millimeter-scale beams at 461 nm wavelength. Our design decouples the minimum feature size from the minimum achievable optical scattering strength, allowing smooth turn-on and continuous control of the emission. Our approach is compatible with commercial foundry photolithography and has reduced sensitivity to both the resolution and the variability of the fabrication approach compared to subwavelength meta-gratings, which often require electron beam lithography.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Wavelength-Accurate Nonlinear Conversion through Wavenumber Selectivity in Photonic Crystal Resonators
Authors:
Jordan R. Stone,
Xiyuan Lu,
Gregory Moille,
Daron Westly,
Tahmid Rahman,
Kartik Srinivasan
Abstract:
Integrated nonlinear wavelength converters transfer optical energy from lasers or quantum emitters to other useful colors, but chromatic dispersion limits the range of achievable wavelength shifts. Moreover, because of geometric dispersion, fabrication tolerances reduce the accuracy with which devices produce specific target wavelengths. Here, we report nonlinear wavelength converters whose operat…
▽ More
Integrated nonlinear wavelength converters transfer optical energy from lasers or quantum emitters to other useful colors, but chromatic dispersion limits the range of achievable wavelength shifts. Moreover, because of geometric dispersion, fabrication tolerances reduce the accuracy with which devices produce specific target wavelengths. Here, we report nonlinear wavelength converters whose operation is not contingent on dispersion engineering; yet, the output wavelengths are controlled with high accuracy. In our scheme, coherent coupling between counter-propagating waves in a photonic crystal microresonator induces a photonic bandgap that isolates (in dispersion space) specific wavenumbers for nonlinear gain. We first demonstrate the wide applicability of this strategy to parametric nonlinear processes, by simulating its use in third harmonic generation, dispersive wave formation in Kerr microcombs, and four-wave mixing Bragg scattering. In experiments, we demonstrate Kerr optical parametric oscillators in which such wavenumber-selective coherent coupling designates the signal mode. As a result, differences between the targeted and realized signal wavelengths are <0.3 percent. Moreover, leveraging the bandgap-protected wavenumber selectivity, we continuously tune the output frequencies by nearly 300 GHz without compromising efficiency. Our results will bring about a paradigm shift in how microresonators are designed for nonlinear optics, and they make headway on the larger problem of building wavelength-accurate light sources using integrated photonics.
△ Less
Submitted 11 December, 2022;
originally announced December 2022.
-
Fourier synthesis dispersion engineering of photonic crystal microrings for broadband frequency combs
Authors:
Gregory Moille,
Xiyuan Lu,
Jordan Stone,
Daron Westly,
Kartik Srinivasan
Abstract:
Dispersion engineering of microring resonators is crucial for optical frequency comb applications, to achieve targeted bandwidths and powers of individual comb teeth. However, conventional microrings only present two geometric degrees of freedom -- width and thickness -- which limits the degree to which dispersion can be controlled. We present a technique where we tune individual resonance frequen…
▽ More
Dispersion engineering of microring resonators is crucial for optical frequency comb applications, to achieve targeted bandwidths and powers of individual comb teeth. However, conventional microrings only present two geometric degrees of freedom -- width and thickness -- which limits the degree to which dispersion can be controlled. We present a technique where we tune individual resonance frequencies for arbitrary dispersion tailoring. Using a photonic crystal microring resonator that induces coupling to both directions of propagation within the ring, we investigate an intuitive design based on Fourier synthesis. Here, the desired photonic crystal spatial profile is obtained through a Fourier relationship with the targeted modal frequency shifts, where each modal shift is determined based on the corresponding effective index modulation of the ring. Experimentally, we demonstrate several distinct dispersion profiles over dozens of modes in transverse magnetic polarization. In contrast, we find that the transverse electric polarization requires a more advanced model that accounts for the discontinuity of the field at the modulated interface. Finally, we present simulations showing arbitrary frequency comb spectral envelope tailoring using our Frequency synthesis approach.
△ Less
Submitted 11 July, 2023; v1 submitted 25 October, 2022;
originally announced October 2022.
-
Integrated Buried Heaters for Efficient Spectral Control of Air-Clad Microresonator Frequency Combs
Authors:
Gregory Moille,
Daron Westly,
Edgar F. Perez,
Meredith Metzler,
Gregory Simelgor,
Kartik Srinivasan
Abstract:
Integrated heaters are a basic ingredient within the photonics toolbox, in particular for microresonator frequency tuning through the thermo-refractive effect. Resonators that are fully embedded in a solid cladding (typically SiO\textsubscript{2}) allow for straightforward lossless integration of heater elements. However, air-clad resonators, which are of great interest for short wavelength disper…
▽ More
Integrated heaters are a basic ingredient within the photonics toolbox, in particular for microresonator frequency tuning through the thermo-refractive effect. Resonators that are fully embedded in a solid cladding (typically SiO\textsubscript{2}) allow for straightforward lossless integration of heater elements. However, air-clad resonators, which are of great interest for short wavelength dispersion engineering and direct interfacing with atomic/molecular systems, do not usually have similarly low loss and efficient integrated heater integration through standard fabrication. Here, we develop a new approach in which the integrated heater is embedded in SiO$_2$ below the waveguiding layer, enabling more efficient heating and more arbitrary routing of the heater traces than possible in a lateral configuration. We incorporate these buried heaters within a stoichiometric Si$_3$N$_4$ process flow that includes high-temperature ($>$1000~$^\circ$C) annealing. Microring resonators with a 1~THz free spectral range and quality factors near 10$^6$ are demonstrated, and the resonant modes are tuned by nearly 1.5~THz, a 5$\times$ improvement compared to equivalent devices with lateral heaters\greg{.} Finally, we demonstrate broadband dissipative Kerr soliton generation in this platform, and show how the heaters can be utilized to aid in bringing relevant lock frequencies within a detectable range.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Hybrid-mode-family Kerr optical parametric oscillation for robust coherent light generation on chip
Authors:
Feng Zhou,
Xiyuan Lu,
Ashutosh Rao,
Jordan Stone,
Gregory Moille,
Edgar Perez,
Daron Westly,
Kartik Srinivasan
Abstract:
Optical parametric oscillation (OPO) using the third-order nonlinearity ($χ^{(3)}$) in integrated photonics platforms is an emerging approach for coherent light generation, and has shown great promise in achieving broad spectral coverage with small device footprints and at low pump powers. However, current $χ^{(3)}$ nanophotonic OPO devices use pump, signal, and idler modes of the same transverse…
▽ More
Optical parametric oscillation (OPO) using the third-order nonlinearity ($χ^{(3)}$) in integrated photonics platforms is an emerging approach for coherent light generation, and has shown great promise in achieving broad spectral coverage with small device footprints and at low pump powers. However, current $χ^{(3)}$ nanophotonic OPO devices use pump, signal, and idler modes of the same transverse spatial mode family. As a result, such single-mode-family OPO (sOPO) is inherently sensitive in dispersion and can be challenging to scalably fabricate and implement. In this work, we propose to use different families of transverse spatial modes for pump, signal, and idler, which we term as hybrid-mode-family OPO (hOPO). We demonstrate its unprecedented robustness in dispersion versus device geometry, pump frequency, and temperature. Moreover, we show the capability of the hOPO scheme to generate a few milliwatts of output signal power with a power conversion efficiency of approximately 8 $\%$ and without competitive processes. The hOPO scheme is an important counterpoint to existing sOPO approaches, and is particularly promising as a robust method to generate coherent on-chip visible and infrared light sources.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
Exceptional points in lossy media enable decay-free wave propagation
Authors:
Alexander Yulaev,
Sangsik Kim,
Qing Li,
Daron A. Westly,
Brian J. Roxworthy,
Kartik Srinivasan,
Vladimir A. Aksyuk
Abstract:
Waves entering a spatially uniform lossy medium typically undergo exponential decay, arising from either the energy loss of the Beer-Lambert-Bouguer transmission law or the evanescent penetration during reflection. Recently, exceptional point singularities in non-Hermitian systems have been linked to unconventional wave propagation, such as the predicted extremely spatially broad constant-intensit…
▽ More
Waves entering a spatially uniform lossy medium typically undergo exponential decay, arising from either the energy loss of the Beer-Lambert-Bouguer transmission law or the evanescent penetration during reflection. Recently, exceptional point singularities in non-Hermitian systems have been linked to unconventional wave propagation, such as the predicted extremely spatially broad constant-intensity guided modes. Despite such promises, the possibility of decay-free wave propagation in a purely lossy medium has been neither theoretically suggested nor experimentally realized until now. Here we discover and experimentally demonstrate decay-free wave propagation accompanied by a striking uniformly distributed energy loss across arbitrary thicknesses of a homogeneous periodically nanostructured waveguiding medium with exceptional points. Predicted by coupled-mode theory and supported by fully vectorial electromagnetic simulations, hundreds-of-waves deep penetration manifesting spatially constant radiation losses are experimentally observed in photonic slab waveguides. The uniform, decay-free radiative energy loss is measured across the entire structured waveguide region, regardless of its length. While the demonstrated constant-intensity radiation finds an immediate application for generating large, uniform and surface-normal free-space plane waves directly from the photonic chip surface, the uncovered decay-free wave phenomenon is universal and holds true across all domains supporting physical waves, opening new horizons for dispersion-engineered materials empowered by exceptional point physics.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Tailoring Broadband Kerr Soliton Microcombs via Post-Fabrication Tuning of the Geometric Dispersion
Authors:
Gregory Moille,
Daron Westly,
Ndubuisi George Orji,
Kartik Srinivasan
Abstract:
Geometric dispersion in integrated microresonators plays a major role in nonlinear optics applications, especially at short wavelengths, to compensate the natural material normal dispersion. Tailoring of geometric confinement allows for anomalous dispersion, which in particular enables the formation of microcombs which can be tuned into the dissipative Kerr soliton (DKS) regime. Due to processes l…
▽ More
Geometric dispersion in integrated microresonators plays a major role in nonlinear optics applications, especially at short wavelengths, to compensate the natural material normal dispersion. Tailoring of geometric confinement allows for anomalous dispersion, which in particular enables the formation of microcombs which can be tuned into the dissipative Kerr soliton (DKS) regime. Due to processes like soliton-induced dispersive wave generation, broadband DKS combs are particularly sensitive to higher-order dispersion, which in turn is sensitive to the ring dimensions at the nanometer-level. For microrings exhibiting a rectangular cross section, the ring width and thickness are the two main control parameters to achieve the targeted dispersion. The former can be easily varied through parameter variation within the lithography mask, yet the latter is defined by the film thickness during growth of the starting material stack, and can show a significant variation (few percent of the total thickness) over a single wafer. In this letter, we demonstrate that controlled dry-etching allows for fine tuning of the device layer (silicon nitride) thickness at the wafer level, allowing multi-project wafers targeting different wavelength bands, and post-fabrication trimming in air-clad ring devices. We demonstrate that such dry etching does not significantly affect either the silicon nitride surface roughness or the optical quality of the devices, thereby enabling fine tuning of the dispersion and the spectral shape of the resulting DKS states.
△ Less
Submitted 12 September, 2021;
originally announced September 2021.
-
Impact of Stoichiometric Silicon Nitride Growth Conditions on Dispersion Engineering of Broadband Microresonator Frequency Combs
Authors:
Gregory Moille,
Daron Westly,
Gregory Simelgor,
Kartik Srinivasan
Abstract:
Microresonator frequency combs, or microcombs, have gained wide appeal for their rich nonlinear physics and wide range of applications. Stoichiometric silicon nitride films grown via low-pressure chemical vapor deposition (LPCVD), in particular, are widely used in chip-integrated Kerr microcombs. Critical to such devices is the ability to control the microresonator dispersion, which has contributi…
▽ More
Microresonator frequency combs, or microcombs, have gained wide appeal for their rich nonlinear physics and wide range of applications. Stoichiometric silicon nitride films grown via low-pressure chemical vapor deposition (LPCVD), in particular, are widely used in chip-integrated Kerr microcombs. Critical to such devices is the ability to control the microresonator dispersion, which has contributions from both material refractive index dispersion and geometric confinement. Here, we show that modifications to the LPCVD growth conditions, specifically the ratio of the gaseous precursors, has a significant impact on material dispersion and hence the overall microresonator dispersion. In contrast to the many efforts focused on comparison between Si-rich films and stoichiometric (Si$_3$N$_4$) films, here we entirely focus on films that are within the nominally stoichiometric growth regime. We further show that microresonator geometric dispersion can be tuned to compensate for changes in the material dispersion.
△ Less
Submitted 7 September, 2021;
originally announced September 2021.
-
Traceable localization enables accurate integration of quantum emitters and photonic structures with high yield
Authors:
Craig R. Copeland,
Adam L. Pintar,
Ronald G. Dixson,
Ashish Chanana,
Kartik Srinivasan,
Daron A. Westly,
B. Robert Ilic,
Marcelo I. Davanco,
Samuel M. Stavis
Abstract:
Traceability to the International System of Units (SI) is fundamental to measurement accuracy and reliability. In this study, we demonstrate subnanometer traceability of localization microscopy, establishing a metrological foundation for the maturation and application of super-resolution methods. To do so, we create a master standard by measuring the positions of submicrometer apertures in an arra…
▽ More
Traceability to the International System of Units (SI) is fundamental to measurement accuracy and reliability. In this study, we demonstrate subnanometer traceability of localization microscopy, establishing a metrological foundation for the maturation and application of super-resolution methods. To do so, we create a master standard by measuring the positions of submicrometer apertures in an array by traceable atomic-force microscopy. We perform correlative measurements of this master standard by optical microscopy, calibrating scale factor and correcting aberration effects. We introduce the concept of a localization uncertainty field due to optical localization errors and scale factor uncertainty, with regions of position traceability to within a 68 % coverage interval of +/- 1 nm. These results enable localization metrology with high throughput, which we apply to measure working standards that we fabricate by electron-beam lithography, validating the accuracy of mean pitch and closing the loop for disseminating and integrating reference arrays. We then apply our novel methods to calibrate an optical microscope with a sample cryostat, accounting for thermal contraction by use of a submicrometer pillar array in silicon as a reference material and elucidating complex distortion. This new calibration enables the accurate integration of quantum emitters and photonic structures with high yield, as we demonstrate theoretically through simulations of the dependence of the Purcell factor of radiative enhancement on registration errors across a wide field. Our study illuminates the challenges and opportunities of achieving traceable localization for comparison of position data across lithography and microscopy systems, from ambient to cryogenic temperatures.
△ Less
Submitted 28 February, 2023; v1 submitted 18 June, 2021;
originally announced June 2021.
-
Surface-Normal Free-Space Beam Projection via Slow-Light Standing Wave Resonances in Extra-Large Near-Zero Index Grating Couplers
Authors:
Alexander Yulaev,
Daron A. Westly,
Vladimir A. Aksyuk
Abstract:
On-chip grating couplers directly connect photonic circuits to free-space light. The commonly used photonic gratings have been specialized for small areas, specific intensity profiles and non-vertical beam projection. This falls short of the precise and flexible wavefront control over large beam areas needed to empower emerging integrated miniaturized optical systems that leverage volumetric light…
▽ More
On-chip grating couplers directly connect photonic circuits to free-space light. The commonly used photonic gratings have been specialized for small areas, specific intensity profiles and non-vertical beam projection. This falls short of the precise and flexible wavefront control over large beam areas needed to empower emerging integrated miniaturized optical systems that leverage volumetric light matter interactions, including trap**, cooling, and interrogation of atoms, bio- and chemi- sensing and complex free-space interconnect. The large coupler size challenges general inverse design techniques, and solutions obtained by them are often difficult to physically understand and generalize. Here by posing the problem to a carefully constrained computational inverse design algorithm capable of large area structures, we discover a qualitatively new class of grating couplers. The numerically found solutions can be understood as coupling an incident photonic slab mode to a spatially extended slow-light (near-zero refractive index) region, backed by a Bragg reflector. The structure forms a spectrally broad standing wave resonance at the target wavelength, radiating vertically into free space. A reflection-less adiabatic transition critically couples the incident photonic mode to the resonance, and the numerically optimized lower cladding provides 70 $\%$ overall theoretical conversion efficiency. We have experimentally validated efficient surface normal collimated emission of $\approx$ 90 $μ$m full width at half maximum Gaussian at the thermally tunable operating wavelength of $\approx$ 780 nm. The variable-mesh-deformation inverse design approach scales to extra-large photonic devices, while directly implementing the fabrication constraints. The deliberate choice of smooth parametrization resulted in a novel type of solution, which is both efficient and physically comprehensible.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Integrated photonic interposers for processing octave-spanning microresonator frequency combs
Authors:
Ashutosh Rao,
Gregory Moille,
Xiyuan Lu,
Daron A. Westly,
Davide Sacchetto,
Michael Geiselmann,
Michael Zervas,
Scott B. Papp,
John Bowers,
Kartik Srinivasan
Abstract:
Microcombs - optical frequency combs generated in microresonators - have advanced tremendously in the last decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs offer the prospect of fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power…
▽ More
Microcombs - optical frequency combs generated in microresonators - have advanced tremendously in the last decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs offer the prospect of fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, this goal has been consistently hindered by the use of bulk free-space and fiber-optic components to process microcombs, limiting form factors to the table-top. Here, we address this challenge by introducing an integrated photonics interposer architecture to process microcombs and replace discrete components. Taking microcomb-based optical frequency synthesis in the telecom C-band around 1550 nm as our target application, we develop an interposer architecture that collects, routes, and interfaces octave-wide optical signals between photonic chiplets and heterogeneously integrated devices that constitute the synthesizer. We have implemented the octave spanning spectral filtering of a microcomb, central to the interposer, in the popular silicon nitride photonic platform, and have confirmed the requisite performance of the individual elements of the interposer. Moreover, we show that the thick silicon nitride needed for bright dissipative Kerr soliton generation can be integrated with the comparatively thin silicon nitride interposer layer through octave-bandwidth adiabatic evanescent coupling, indicating a path towards future system-level consolidation. Our interposer architecture addresses the immediate need for on-chip microcomb processing to successfully miniaturize microcomb systems. As microcombs and integrated devices evolve, our approach can be readily adapted to other metrology-grade applications based on optical atomic clocks and high-precision navigation and spectroscopy.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
A universal frequency engineering tool for microcavity nonlinear optics: multiple selective mode splitting of whispering-gallery resonances
Authors:
Xiyuan Lu,
Ashutosh Rao,
Gregory Moille,
Daron A. Westly,
Kartik Srinivasan
Abstract:
Whispering-gallery microcavities have been used to realize a variety of efficient parametric nonlinear optical processes through the enhanced light-matter interaction brought about by supporting multiple high quality factor and small modal volume resonances. Critical to such studies is the ability to control the relative frequencies of the cavity modes, so that frequency matching is achieved to sa…
▽ More
Whispering-gallery microcavities have been used to realize a variety of efficient parametric nonlinear optical processes through the enhanced light-matter interaction brought about by supporting multiple high quality factor and small modal volume resonances. Critical to such studies is the ability to control the relative frequencies of the cavity modes, so that frequency matching is achieved to satisfy energy conservation. Typically this is done by tailoring the resonator cross-section. Doing so modifies the frequencies of all of the cavity modes, that is, the global dispersion profile, which may be undesired, for example, in introducing competing nonlinear processes.Here, we demonstrate a frequency engineering tool, termed multiple selective mode splitting (MSMS), that is independent of the global dispersion and instead allows targeted and independent control of the frequencies of multiple cavity modes. In particular, we show controllable frequency shifts up to 0.8 nm, independent control of the splitting of up to five cavity modes with optical quality factors $\gtrsim 10^5$, and strongly suppressed frequency shifts for untargeted modes. The MSMS technique can be broadly applied to a wide variety of nonlinear optical processes across different material platforms, and can be used to both selectively enhance processes of interestand suppress competing unwanted processes.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
On-chip optical parametric oscillation into the visible: generating red, orange, yellow, and green from a near-infrared pump
Authors:
Xiyuan Lu,
Gregory Moille,
Ashutosh Rao,
Daron Westly,
Kartik Srinivasan
Abstract:
Optical parametric oscillation (OPO) in a microresonator is promising as an efficient and scalable approach to on-chip coherent visible light generation. However, so far only red light at < 420 THz (near the edge of the visible band) has been reported. In this work, we demonstrate on-chip OPO covering > 130 THz of the visible spectrum, including red, orange, yellow, and green wavelengths. In parti…
▽ More
Optical parametric oscillation (OPO) in a microresonator is promising as an efficient and scalable approach to on-chip coherent visible light generation. However, so far only red light at < 420 THz (near the edge of the visible band) has been reported. In this work, we demonstrate on-chip OPO covering > 130 THz of the visible spectrum, including red, orange, yellow, and green wavelengths. In particular, using a pump laser that is scanned 5 THz in the near-infrared from 386 THz to 391 THz, the signal is tuned from the near-infrared at 395 THz to the visible at 528 THz, while the idler is tuned from the near-infrared at 378 THz to the infrared at 254 THz. The widest signal-idler separation we demonstrate of 274 THz corresponds to more than an octave span and is the widest demonstrated for a nanophotonic OPO to date. Our work is a clear demonstration of how nonlinear nanophotonics can transform light from readily accessible compact near-infrared lasers to targeted visible wavelengths of interest, which is crucial for field-level deployment of spectroscopy and metrology systems.
△ Less
Submitted 26 March, 2020;
originally announced March 2020.
-
Efficient photo-induced second harmonic generation in silicon photonics
Authors:
Xiyuan Lu,
Gregory Moille,
Ashutosh Rao,
Daron Westly,
Kartik Srinivasan
Abstract:
Silicon photonics lacks a second-order nonlinear optical response in general because the typical constituent materials are centro-symmetric and lack inversion symmetry, which prohibits second-order nonlinear processes such as second harmonic generation (SHG). Here, for the first time, we realize efficient SHG in a silicon-based optical microresonator by combining a strong photo-induced effective s…
▽ More
Silicon photonics lacks a second-order nonlinear optical response in general because the typical constituent materials are centro-symmetric and lack inversion symmetry, which prohibits second-order nonlinear processes such as second harmonic generation (SHG). Here, for the first time, we realize efficient SHG in a silicon-based optical microresonator by combining a strong photo-induced effective second-order nonlinearity with resonant enhancement and perfect-phase matching. We show a record-high conversion efficiency of 2,500 %/W, which is 2 to 4 orders of magnitude larger than previous works. In particular, our devices realize mW-level SHG output powers with > 20 % power conversion efficiency. This demonstration is a major breakthrough in realizing efficient second-order nonlinear processes in silicon photonics, and paves the way for integrated self-referencing of Kerr frequency combs for compact optical frequency synthesis and optical clock technologies.
△ Less
Submitted 26 March, 2020;
originally announced March 2020.
-
Milliwatt-threshold visible-telecom optical parametric oscillation using silicon nanophotonics
Authors:
Xiyuan Lu,
Gregory Moille,
Anshuman Singh,
Qing Li,
Daron A. Westly,
Ashutosh Rao,
Su-Peng Yu,
Travis C. Briles,
Tara Drake,
Scott B. Papp,
Kartik Srinivasan
Abstract:
The on-chip creation of coherent light at visible wavelengths is crucial to field-level deployment of spectroscopy and metrology systems. Although on-chip lasers have been implemented in specific cases, a general solution that is not restricted by limitations of specific gain media has not been reported. Here, we propose creating visible light from an infrared pump by widely-separated optical para…
▽ More
The on-chip creation of coherent light at visible wavelengths is crucial to field-level deployment of spectroscopy and metrology systems. Although on-chip lasers have been implemented in specific cases, a general solution that is not restricted by limitations of specific gain media has not been reported. Here, we propose creating visible light from an infrared pump by widely-separated optical parametric oscillation (OPO) using silicon nanophotonics. The OPO creates signal and idler light in the 700 nm and 1300 nm bands, respectively, with a 900 nm pump. It operates at a threshold power of (0.9 +/- 0.1) mW, over 50x smaller than other widely-separated microcavity OPO works, which have only been reported in the infrared. This low threshold enables direct pum** without need of an intermediate optical amplifier. We further show how the device design can be modified to generate 780 nm and 1500 nm light with a similar power efficiency. Our nanophotonic OPO shows distinct advantages in power efficiency, operation stability, and device scalability, and is a major advance towards flexible on-chip generation of coherent visible light.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
Broadband Resonator-Waveguide Coupling for Efficient Extraction of Octave Spanning Microcombs
Authors:
Gregory Moille,
Qing Li,
Travis C. Briles,
Su-Peng Yu,
Tara Drake,
Xiyuan Lu,
Ashutosh Rao,
Daron Westly,
Scott B. Papp,
Kartik Srinivasan
Abstract:
Frequency combs spanning over an octave have been successfully demonstrated in Kerr nonlinear microresonators on-chip. These micro-combs rely on both engineered dispersion, to enable generation of frequency components across the octave, and on engineered coupling, to efficiently extract the generated light into an access waveguide while maintaining a close to critically-coupled pump. The latter is…
▽ More
Frequency combs spanning over an octave have been successfully demonstrated in Kerr nonlinear microresonators on-chip. These micro-combs rely on both engineered dispersion, to enable generation of frequency components across the octave, and on engineered coupling, to efficiently extract the generated light into an access waveguide while maintaining a close to critically-coupled pump. The latter is challenging as the spatial overlap between the access waveguide and the ring modes decays with frequency. This leads to strong coupling variation across the octave, with poor extraction at short wavelengths. Here, we investigate how a waveguide wrapped around a portion of the resonator, in a pulley scheme, can improve extraction of octave-spanning microcombs, in particular at short wavelengths. We use coupled mode theory to predict the performance of the pulley couplers, and demonstrate good agreement with experimental measurements. Using an optimal pulley coupling design, we demonstrate a 20~dB improvement in extraction at short wavelengths compared to straight waveguide coupling.
△ Less
Submitted 20 September, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Kerr Microresonator Soliton Frequency Combs at Cryogenic Temperatures
Authors:
Gregory Moille,
Xiyuan Lu,
Ashutosh Rao,
Qing Li,
Daron A. Westly,
Leonardo Ranzani,
Scott B. Papp,
Mohammad Soltani,
Kartik Srinivasan
Abstract:
We present measurements of silicon nitride nonlinear microresonators and frequency comb generation at cryogenic temperatures as low as 7~K. The resulting two orders of magnitude reduction in the thermo-refractive coefficient relative to room-temperature enables direct access to single bright Kerr soliton states through adiabatic frequency tuning of the pump laser while remaining in thermal equilib…
▽ More
We present measurements of silicon nitride nonlinear microresonators and frequency comb generation at cryogenic temperatures as low as 7~K. The resulting two orders of magnitude reduction in the thermo-refractive coefficient relative to room-temperature enables direct access to single bright Kerr soliton states through adiabatic frequency tuning of the pump laser while remaining in thermal equilibrium. Our experimental results, supported by theoretical modeling, show that single solitons are easily accessible at temperatures below 60~K for the microresonator device under study. We further demonstrate that the cryogenic temperature primarily impacts the thermo-refractive coefficient. Other parameters critical to the generation of solitons, such as quality factor, dispersion, and effective nonlinearity, are unaltered. Finally, we discuss the potential improvement in thermo-refractive noise resulting from cryogenic operation. The results of this study open up new directions in advancing chip-scale frequency comb optical clocks and metrology at cryogenic temperatures.
△ Less
Submitted 27 September, 2019; v1 submitted 15 June, 2019;
originally announced June 2019.
-
Efficient telecom-to-visible spectral translation through ultra-low power nonlinear nanophotonics
Authors:
Xiyuan Lu,
Gregory Moille,
Qing Li,
Daron A. Westly,
Anshuman Singh,
Ashutosh Rao,
Su-Peng Yu,
Travis C. Briles,
Scott B. Papp,
Kartik Srinivasan
Abstract:
The ability to spectrally translate lightwave signals in a compact, low-power platform is at the heart of the promise of nonlinear nanophotonic technologies. For example, a device to link the telecommunications band with visible and short near-infrared wavelengths can enable a connection between high-performance chip-integrated lasers based on scalable nanofabrication technology with atomic system…
▽ More
The ability to spectrally translate lightwave signals in a compact, low-power platform is at the heart of the promise of nonlinear nanophotonic technologies. For example, a device to link the telecommunications band with visible and short near-infrared wavelengths can enable a connection between high-performance chip-integrated lasers based on scalable nanofabrication technology with atomic systems used for time and frequency metrology. While second-order nonlinear (χ^(2)) systems are the natural approach for bridging such large spectral gaps, here we show that third-order nonlinear (chi^(3)) systems, despite their typically much weaker nonlinear response, can realize spectral translation with unprecedented performance. By combining resonant enhancement with nanophotonic mode engineering in a silicon nitride microring resonator, we demonstrate efficient spectral translation of a continuous-wave signal from the telecom band (~ 1550 nm) to the visible band (~ 650 nm) through cavity-enhanced four-wave mixing. We achieve such translation over a wide spectral range >250 THz with a translation efficiency of (30.1 +/- 2.8) % and using an ultra-low pump power of (329 +/- 13) uW. The translation efficiency projects to (274 +/- 28) % at 1 mW and is more than an order of magnitude larger than what has been achieved in current nanophotonic devices.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Photonic integration of an optical atomic clock
Authors:
Z. L. Newman,
V. Maurice,
T. E. Drake,
J. R. Stone,
T. C. Briles,
D. T. Spencer,
C. Fredrick,
Q. Li,
D. Westly,
B. R. Ilic,
B. Shen,
M. -G. Suh,
K. Y. Yang,
C. Johnson,
D. M. S. Johnson,
L. Hollberg,
K. Vahala,
K. Srinivasan,
S. A. Diddams,
J. Kitching,
S. B. Papp,
M. T Hummon
Abstract:
Laboratory optical atomic clocks achieve remarkable accuracy (now counted to 18 digits or more), opening possibilities to explore fundamental physics and enable new measurements. However, their size and use of bulk components prevent them from being more widely adopted in applications that require precision timing. By leveraging silicon-chip photonics for integration and to reduce component size a…
▽ More
Laboratory optical atomic clocks achieve remarkable accuracy (now counted to 18 digits or more), opening possibilities to explore fundamental physics and enable new measurements. However, their size and use of bulk components prevent them from being more widely adopted in applications that require precision timing. By leveraging silicon-chip photonics for integration and to reduce component size and complexity, we demonstrate a compact optical-clock architecture. Here a semiconductor laser is stabilized to an optical transition in a microfabricated rubidium vapor cell, and a pair of interlocked Kerr-microresonator frequency combs provide fully coherent optical division of the clock laser to generate an electronic 22 GHz clock signal with a fractional frequency instability of one part in 10^13. These results demonstrate key concepts of how to use silicon-chip devices in future portable and ultraprecise optical clocks.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.
-
A Kerr-microresonator optical clockwork
Authors:
Tara E. Drake,
Travis C. Briles,
Daryl T. Spencer,
Jordan R. Stone,
David R. Carlson,
Daniel D. Hickstein,
Qing Li,
Daron Westly,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
Kerr microresonators generate interesting and useful fundamental states of electromagnetic radiation through nonlinear interactions of continuous-wave (CW) laser light. Using photonic-integration techniques, functional devices with low noise, small size, low-power consumption, scalable fabrication, and heterogeneous combinations of photonics and electronics can be realized. Kerr solitons, which st…
▽ More
Kerr microresonators generate interesting and useful fundamental states of electromagnetic radiation through nonlinear interactions of continuous-wave (CW) laser light. Using photonic-integration techniques, functional devices with low noise, small size, low-power consumption, scalable fabrication, and heterogeneous combinations of photonics and electronics can be realized. Kerr solitons, which stably circulate in a Kerr microresonator, have emerged as a source of coherent, ultrafast pulse trains and ultra-broadband optical-frequency combs. Using the f-2f technique, Kerr combs support carrier-envelope-offset phase stabilization for optical synthesis and metrology. In this paper, we introduce a Kerr-microresonator optical clockwork based on optical-frequency division (OFD), which is a powerful technique to transfer the fractional-frequency stability of an optical clock to a lower frequency electronic clock signal. The clockwork presented here is based on a silicon-nitride (Si$_3$N$_4$) microresonator that supports an optical-frequency comb composed of soliton pulses at 1 THz repetition rate. By electro-optic phase modulation of the entire Si$_3$N$_4$ comb, we arbitrarily generate additional CW modes between the Si$_3$N$_4$ comb modes; operationally, this reduces the pulse train repetition frequency and can be used to implement OFD to the microwave domain. Our experiments characterize the residual frequency noise of this Kerr-microresonator clockwork to one part in $10^{17}$, which opens the possibility of using Kerr combs with high performance optical clocks. In addition, the photonic integration and 1 THz resolution of the Si$_3$N$_4$ frequency comb makes it appealing for broadband, low-resolution liquid-phase absorption spectroscopy, which we demonstrate with near infrared measurements of water, lipids, and organic solvents.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.
-
Tunable mid-infrared generation via wide-band four wave mixing in silicon nitride waveguides
Authors:
Abijith Kowligy,
Daniel Hickstein,
Alex Lind,
David Carlson,
Henry Timmers,
Nima Nader,
Daniel Maser,
Daron Westly,
Kartik Srinivasan,
Scott Papp,
Scott Diddams
Abstract:
We experimentally demonstrate wide-band (>100 THz) frequency down-conversion of near-infrared (NIR) femtosecond-scale pulses from an Er:fiber laser to the mid-infrared (MIR) using four-wave-mixing (FWM) in photonic-chip silicon-nitride waveguides. The engineered dispersion in the nanophotonic geometry, along with the wide transparency range of silicon nitride, enables large-detuning FWM phase-matc…
▽ More
We experimentally demonstrate wide-band (>100 THz) frequency down-conversion of near-infrared (NIR) femtosecond-scale pulses from an Er:fiber laser to the mid-infrared (MIR) using four-wave-mixing (FWM) in photonic-chip silicon-nitride waveguides. The engineered dispersion in the nanophotonic geometry, along with the wide transparency range of silicon nitride, enables large-detuning FWM phase-matching and results in tunable MIR from 2.6-3.6 um on a single chip with 100-pJ-scale pump-pulse energies. Additionally, we observe > 20 dB broadband parametric gain for the NIR pulses when the FWM process is operated in a frequency up-conversion configuration. Our results demonstrate how integrated photonic circuits could realize multiple nonlinear optical phenomena on the same chip and lead to engineered synthesis of broadband, tunable, and coherent light across the NIR and MIR wavelength bands from fiber-based pumps.
△ Less
Submitted 8 July, 2018;
originally announced July 2018.
-
Self-organized nonlinear gratings for ultrafast nanophotonics
Authors:
Daniel D. Hickstein,
David R. Carlson,
Haridas Mundoor,
Jacob B. Khurgin,
Kartik Srinivasan,
Daron Westly,
Abijith Kowligy,
Ivan Smalyukh,
Scott A. Diddams,
Scott B. Papp
Abstract:
Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond puls…
▽ More
Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond pulses propagating through nanophotonic waveguides, providing simultaneous group-velocity matching and quasi-phase-matching for second harmonic generation. We record the first direct microscopy images of photo-induced nonlinear gratings, and demonstrate how these waveguides enable simultaneous $χ^{(2)}$ and $χ^{(3)}$ nonlinear processes, which we utilize to stabilize a laser frequency comb. Finally, we derive the equations that govern self-organized grating formation for femtosecond pulses and explain the crucial role of group-velocity matching. In the future, such nanophotonic waveguides could enable scalable, reconfigurable nonlinear optical systems.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Chip-integrated visible-telecom photon pair sources for quantum communication
Authors:
Xiyuan Lu,
Qing Li,
Daron A. Westly,
Gregory Moille,
Anshuman Singh,
Vikas Anant,
Kartik Srinivasan
Abstract:
Photon pair sources are fundamental building blocks for quantum entanglement and quantum communication. Recent studies in silicon photonics have documented promising characteristics for photon pair sources within the telecommunications band, including sub-milliwatt optical pump power, high spectral brightness, and high photon purity. However, most quantum systems suitable for local operations, suc…
▽ More
Photon pair sources are fundamental building blocks for quantum entanglement and quantum communication. Recent studies in silicon photonics have documented promising characteristics for photon pair sources within the telecommunications band, including sub-milliwatt optical pump power, high spectral brightness, and high photon purity. However, most quantum systems suitable for local operations, such as storage and computation, support optical transitions in the visible or short near-infrared bands. In comparison to telecommunications wavelengths, the significantly higher optical attenuation in silica at such wavelengths limits the length scale over which optical-fiber-based quantum communication between such local nodes can take place. One approach to connect such systems over fiber is through a photon pair source that can bridge the visible and telecom bands, but an appropriate source, which should produce narrow-band photon pairs with a high signal-to-noise ratio, has not yet been developed in an integrated platform. Here, we demonstrate a nanophotonic visible-telecom photon pair source for the first time, using high quality factor silicon nitride resonators to generate bright photon pairs with an unprecedented coincidence-to-accidental ratio (CAR) up to (3800 +/- 200). We further demonstrate dispersion engineering of the microresonators to enable the connection of different species of trapped atoms/ions, defect centers, and quantum dots to the telecommunications bands for future quantum communication systems.
△ Less
Submitted 10 May, 2018;
originally announced May 2018.
-
Phased-Locked Two-Color Single Soliton Microcombs in Dispersion-Engineered Si3N4 Resonators
Authors:
Gregory Moille,
Qing Li,
Sangsik Kim,
Daron Westly,
Kartik Srinivasan
Abstract:
We propose and theoretically investigate a dispersion-engineered Si3N4 microring resonator, based on a cross-section containing a partially-etched trench, that supports phase-locked, two-color soliton microcomb states. These soliton states consist of a single circulating intracavity pulse with a modulated envelope that sits on a continuous wave background. Such temporal waveforms produce a frequen…
▽ More
We propose and theoretically investigate a dispersion-engineered Si3N4 microring resonator, based on a cross-section containing a partially-etched trench, that supports phase-locked, two-color soliton microcomb states. These soliton states consist of a single circulating intracavity pulse with a modulated envelope that sits on a continuous wave background. Such temporal waveforms produce a frequency comb whose spectrum is spread over two widely-spaced spectral windows, each exhibiting a squared hyperbolic secant envelope, with the two windows phase-locked to each other via Cherenkov radiation. The first spectral window is centered around the 1550 nm pump, while the second spectral window is tailored based on straightforward geometric control, and can be centered as short as 750 nm and as long as 3000 nm. We numerically analyze the robustness of the design to parameter variation, and consider its implications to self-referencing and visible wavelength comb generation.
△ Less
Submitted 25 March, 2018;
originally announced March 2018.
-
Photonic waveguide mode to free-space Gaussian beam extreme mode converter
Authors:
Sangsik Kim,
Daron A. Westly,
Brian J. Roxworthy,
Qing Li,
Alexander Yulaev,
Kartik Srinivasan,
Vladimir A. Aksyuk
Abstract:
Integration of photonic chips with atomic, micromechanical, chemical and biological systems can advance science and open many possibilities in chip-scale devices and technology. Compact photonic structures for direct coupling of light between high-index single-mode waveguides and arbitrary free-space modes spanning hundreds of waves in cross-section would eliminate bulky optical components and ena…
▽ More
Integration of photonic chips with atomic, micromechanical, chemical and biological systems can advance science and open many possibilities in chip-scale devices and technology. Compact photonic structures for direct coupling of light between high-index single-mode waveguides and arbitrary free-space modes spanning hundreds of waves in cross-section would eliminate bulky optical components and enable integration of photonics into many new applications requiring wide beams, structured light and centimeter-scale propagation distances with low diffraction-limited losses. Conventional fiber-coupling approaches do not scale well for accurate, low-loss coupling across the extremely large mode scale mismatch ($\approx10^6$ times in modal area). Here we present an extreme mode converter that can transform the photonic waveguide mode to the diffraction-limited, free-space Gaussian beam, with a beam waist of about $160~μ$m. Using two identical converters, we demonstrate a grating-to-grating coupling that couples the radiating beam back to the chip through a mirror reflection in free-space. Operating at 780~nm for integration with chip-scale atomic vapor cell cavities, our design can be adapted for visible, telecommunication or other wavelengths. Furthermore, other types of beams can be implemented by using the 2-stage expansion approach presented in this paper.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Fully self-referenced frequency comb consuming 5 Watts of electrical power
Authors:
Paritosh Manurkar,
Edgar F. Perez,
Daniel D. Hickstein,
David R. Carlson,
Jeff Chiles,
Daron A. Westly,
Esther Baumann,
Scott A. Diddams,
Nathan R. Newbury,
Kartik Srinivasan,
Scott B. Papp,
Ian Coddington
Abstract:
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fibe…
▽ More
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fiber oscillator/amplifier pumped by two 250-mW passively-cooled pump diodes that consume less than 5 W of electrical power. The temperature tuning of the oscillator, necessary to stabilize the repetition rate in the presence of environmental temperature changes, is achieved by resistive heating of a section of gold-palladium-coated fiber within the laser cavity. By heating only the small thermal mass of the fiber, the repetition rate is tuned over 4.2 kHz (corresponding to an effective temperature change of 4.2 °C) with a fast time constant of 0.5 s, at a low power consumption of 0.077 W/°C, compared to 2.5 W/°C in the conventional 200-MHz comb design.
△ Less
Submitted 18 September, 2018; v1 submitted 7 February, 2018;
originally announced February 2018.
-
Kerr-microresonator solitons for accurate carrier-envelope-frequency stabilization
Authors:
Travis C. Briles,
Jordan R. Stone,
Tara E. Drake,
Daryl T. Spencer,
Connor Frederick,
Qing Li,
Daron A. Westly,
B. Robert Illic,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
Carrier-envelope phase stabilization of optical pulses enables exquisitely precise measurements by way of direct optical-frequency synthesis, absolute optical-to-microwave phase conversion, and control of ultrafast waveforms. We report such phase stabilization for Kerr-microresonator frequency combs integrated on silicon chips, and verify their fractional-frequency inaccuracy at <3x10-16. Our work…
▽ More
Carrier-envelope phase stabilization of optical pulses enables exquisitely precise measurements by way of direct optical-frequency synthesis, absolute optical-to-microwave phase conversion, and control of ultrafast waveforms. We report such phase stabilization for Kerr-microresonator frequency combs integrated on silicon chips, and verify their fractional-frequency inaccuracy at <3x10-16. Our work introduces an interlocked Kerr-comb configuration comprised of one silicon-nitride and one silica microresonator, which feature nearly harmonic repetition frequencies and can be generated with one laser. These frequency combs support an ultrafast-laser regime with few-optical-cycle, 1-picosecond-period soliton pulses and a total dispersive-wave-enhanced bandwidth of 170 THz, while providing a stable phase-link between the optical and microwave domains. To accommodate low-power and mobile application platforms, our phase-locked frequency-comb system operates with <250 mW of chip-coupled power. Our work establishes Kerr-microresonator combs as a viable technology for applications like optical-atomic timekee**, optical synthesis, and related directions.
△ Less
Submitted 20 November, 2017; v1 submitted 16 November, 2017;
originally announced November 2017.
-
Quasi-phase-matched supercontinuum-generation in photonic waveguides
Authors:
Daniel D. Hickstein,
Grace C. Kerber,
David R. Carlson,
Lin Chang,
Daron Westly,
Kartik Srinivasan,
Abijith Kowligy,
John E. Bowers,
Scott A. Diddams,
Scott B. Papp
Abstract:
Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally…
▽ More
Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally demonstrate quasi-phase-matched supercontinuum to the TE20 and TE00 waveguide modes, which enhances the intensity of the SCG in specific spectral regions by as much as 20 dB. We utilize higher-order quasi-phase-matching (up to the 16th order) to enhance the intensity in numerous locations across the spectrum. Quasi-phase-matching adds a unique dimension to the design-space for SCG waveguides, allowing the spectrum to be engineered for specific applications.
△ Less
Submitted 7 December, 2017; v1 submitted 10 October, 2017;
originally announced October 2017.
-
An Integrated-Photonics Optical-Frequency Synthesizer
Authors:
Daryl T. Spencer,
Tara Drake,
Travis C. Briles,
Jordan Stone,
Laura C. Sinclair,
Connor Fredrick,
Qing Li,
Daron Westly,
B. Robert Ilic,
Aaron Bluestone,
Nicolas Volet,
Tin Komljenovic,
Lin Chang,
Seung Hoon Lee,
Dong Yoon Oh,
Myoung-Gyun Suh,
Ki Youl Yang,
Martin H. P. Pfeiffer,
Tobias J. Kippenberg,
Erik Norberg,
Luke Theogarajan,
Kerry Vahala,
Nathan R. Newbury,
Kartik Srinivasan,
John E. Bowers
, et al. (2 additional authors not shown)
Abstract:
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated…
▽ More
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while step** the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
-
Versatile silicon-waveguide supercontinuum for coherent mid-infrared spectroscopy
Authors:
Nima Nader,
Daniel L. Maser,
Flavio C. Cruz,
Abijith Kowligy,
Henry Timmers,
Jeff Chiles,
Connor Fredrick,
Daron A. Westly,
Sae Woo Nam,
Richard P. Mirin,
Jeffrey M. Shainline,
Scott A. Diddams
Abstract:
Infrared spectroscopy is a powerful tool for basic and applied science. The molecular spectral fingerprints in the 3 um to 20 um region provide a means to uniquely identify molecular structure for fundamental spectroscopy, atmospheric chemistry, trace and hazardous gas detection, and biological microscopy. Driven by such applications, the development of low-noise, coherent laser sources with broad…
▽ More
Infrared spectroscopy is a powerful tool for basic and applied science. The molecular spectral fingerprints in the 3 um to 20 um region provide a means to uniquely identify molecular structure for fundamental spectroscopy, atmospheric chemistry, trace and hazardous gas detection, and biological microscopy. Driven by such applications, the development of low-noise, coherent laser sources with broad, tunable coverage is a topic of great interest. Laser frequency combs possess a unique combination of precisely defined spectral lines and broad bandwidth that can enable the above-mentioned applications. Here, we leverage robust fabrication and geometrical dispersion engineering of silicon nanophotonic waveguides for coherent frequency comb generation spanning 70 THz in the mid-infrared (2.5 um to 6.2 um). Precise waveguide fabrication provides significant spectral broadening and engineered spectra targeted at specific mid-infrared bands. We use this coherent light source for dual-comb spectroscopy at 5 um.
△ Less
Submitted 12 July, 2017;
originally announced July 2017.
-
Self-referenced frequency combs using high-efficiency silicon-nitride waveguides
Authors:
David R. Carlson,
Daniel D. Hickstein,
Alex Lind,
Stefan Droste,
Daron Westly,
Nima Nader,
Ian Coddington,
Nathan R. Newbury,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octave…
▽ More
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octaves of spectral broadening with incident energies of only 110 pJ. Following supercontinuum generation, self-referencing is accomplished by mixing 780-nm dispersive-wave light with the frequency-doubled output of the fiber laser. In addition, at higher optical powers, we demonstrate f-to-3f self-referencing directly from the waveguide output by the interference of simultaneous supercontinuum and third harmonic generation, without the use of an external doubling crystal or interferometer. These hybrid comb systems combine the performance of fiber-laser frequency combs with the high nonlinearity and compactness of photonic waveguides, and should lead to low-cost, fully stabilized frequency combs for portable and space-borne applications.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Photonic-chip supercontinuum with tailored spectra for precision frequency metrology
Authors:
David Carlson,
Daniel Hickstein,
Alexander Lind,
Judith Olson,
Richard Fox,
Roger Brown,
Andrew Ludlow,
Qing Li,
Daron Westly,
Holly Leopardi,
Tara Fortier,
Kartik Srinivasan,
Scott Diddams,
Scott Papp
Abstract:
Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applica…
▽ More
Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applications in frequency metrology and precision spectroscopy, it is desirable to not only support self-referencing, but also to generate low-noise combs with customizable broadband spectra. In this work, we demonstrate dispersion-engineered waveguides based on silicon nitride that are designed to meet these goals and enable precision optical metrology experiments across large wavelength spans. We perform a clock comparison measurement and report a clock-limited relative frequency instability of $3.8\times10^{-15}$ at $τ= 2$ seconds between a 1550 nm cavity-stabilized reference laser and NIST's calcium atomic clock laser at 657 nm using a two-octave waveguide-supercontinuum comb.
△ Less
Submitted 13 February, 2017; v1 submitted 10 February, 2017;
originally announced February 2017.
-
Stably accessing octave-spanning microresonator frequency combs in the soliton regime
Authors:
Qing Li,
Travis C. Briles,
Daron A. Westly,
Tara E. Drake,
Jordan R. Stone,
B. Robert Ilic,
Scott A. Diddams,
Scott B. Papp,
Kartik Srinivasan
Abstract:
Microresonator frequency combs can be an enabling technology for optical frequency synthesis and timekee** in low size, weight, and power architectures. Such systems require comb operation in low-noise, phase-coherent states such as solitons, with broad spectral bandwidths (e.g., octave-spanning) for self-referencing to detect the carrier-envelope offset frequency. However, stably accessing such…
▽ More
Microresonator frequency combs can be an enabling technology for optical frequency synthesis and timekee** in low size, weight, and power architectures. Such systems require comb operation in low-noise, phase-coherent states such as solitons, with broad spectral bandwidths (e.g., octave-spanning) for self-referencing to detect the carrier-envelope offset frequency. However, stably accessing such states is complicated by thermo-optic dispersion. For example, in the Si3N4 platform, precisely dispersion-engineered structures can support broadband operation, but microsecond thermal time constants have necessitated fast pump power or frequency control to stabilize the solitons. In contrast, here we consider how broadband soliton states can be accessed with simple pump laser frequency tuning, at a rate much slower than the thermal dynamics. We demonstrate octave-spanning soliton frequency combs in Si3N4 microresonators, including the generation of a multi-soliton state with a pump power near 40 mW and a single-soliton state with a pump power near 120 mW. We also develop a simplified two-step analysis to explain how these states are accessed in a thermally stable way without fast control of the pump laser, and outline the required thermal properties for such operation. Our model agrees with experimental results as well as numerical simulations based on a Lugiato-Lefever equation that incorporates thermo-optic dispersion. Moreover, it also explains an experimental observation that a member of an adjacent mode family on the red-detuned side of the pump mode can mitigate the thermal requirements for accessing soliton states.
△ Less
Submitted 28 November, 2016;
originally announced November 2016.