-
Next-Generation Superconducting RF Technology based on Advanced Thin Film Technologies and Innovative Materials for Accelerator Enhanced Performance and Energy Reach
Authors:
A. - M. Valente-Feliciano,
C. Antoine,
S. Anlage,
G. Ciovati,
J. Delayen,
F. Gerigk,
A. Gurevich,
T. Junginger,
S. Keckert,
G. Keppe,
J. Knobloch,
T. Kubo,
O. Kugeler,
D. Manos,
C. Pira,
T. Proslier,
U. Pudasaini,
C. E. Reece,
R. A. Rimmer,
G. J. Rosaz,
T. Saeki,
R. Vaglio,
R. Valizadeh,
H. Vennekate,
W. Venturini Delsolaro
, et al. (3 additional authors not shown)
Abstract:
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generat…
▽ More
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generation thin-film based cavities. Nb on Cu cavities are developed to perform as good as or better than bulk Nb at reduced cost and with better thermal stability. Recent results showing improved accelerating field and dramatically reduced Q slope show their potential for many applications. The second research thrust is to develop cavities coated with materials that can operate at higher temperatures or sustain higher fields. Proof of principle has been established for the merit of Nb3Sn for SRF application. Research is now needed to further exploit the material and reach its full potential with novel deposition techniques. The third line of research is to push SRF performance beyond the capabilities of the superconductors alone with multilayered coatings. In parallel, developments are needed to provide quality substrates, cooling schemes and cryomodule design tailored to thin film cavities. Recent results in these three research thrusts suggest that SRF thin film technologies are at the eve of a technological revolution. For them to mature, active community support and sustained funding are needed to address fundamental developments supporting material deposition techniques, surface and RF research, technical challenges associated with scaling and industrialization. With dedicated and sustained investment, next-generation thin-film based cavities will become a reality with high performance and efficiency, facilitating energy sustainable science while enabling higher luminosity, and higher energy.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Mitigation of parasitic losses in the quadrupole resonator enabling direct measurements of low residual resistances of SRF samples
Authors:
S. Keckert,
W. Ackermann,
H. De Gersem,
X. Jiang,
A. Ö. Sezgin,
M. Vogel,
M. Wenskat,
R. Kleindienst,
J. Knobloch,
O. Kugeler,
D. Tikhonov
Abstract:
The quadrupole resonator (QPR) is a dedicated sample-test cavity for the RF characterization of superconducting samples in a wide temperature, RF field and frequency range. Its main purpose are high resolution measurements of the surface resistance with direct access to the residual resistance thanks to the low frequency of the first operating quadrupole mode. Besides the well-known high resolutio…
▽ More
The quadrupole resonator (QPR) is a dedicated sample-test cavity for the RF characterization of superconducting samples in a wide temperature, RF field and frequency range. Its main purpose are high resolution measurements of the surface resistance with direct access to the residual resistance thanks to the low frequency of the first operating quadrupole mode. Besides the well-known high resolution of the QPR, a bias of measurement data towards higher values has been observed, especially at higher harmonic quadrupole modes. Numerical studies show that this can be explained by parasitic RF losses on the adapter flange used to mount samples into the QPR. Coating several micrometer of niobium on those surfaces of the stainless steel flange that are exposed to the RF fields significantly reduced this bias, enabling a direct measurement of a residual resistance smaller than 5 n$Ω$ at 2 K and 413 MHz. A constant correction based on simulations was not feasible due to deviations from one measurement to another. However, this issue is resolved given these new results.
△ Less
Submitted 27 October, 2021; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Why Monday never wins -- An Example of the Secretary Problem
Authors:
Peter Blum,
Marc Wenskat
Abstract:
We analyzed the winning statistics of the German TV show 'Das Perfekte Dinner', a competition where the contestants rate each other. We did a comparison of the original and the celebrity version of the show and also implemented a rescaling of the points to reduce the influences of subjective grading. We found that there is a strong dependency of the winning rate on the position of performing, not…
▽ More
We analyzed the winning statistics of the German TV show 'Das Perfekte Dinner', a competition where the contestants rate each other. We did a comparison of the original and the celebrity version of the show and also implemented a rescaling of the points to reduce the influences of subjective grading. We found that there is a strong dependency of the winning rate on the position of performing, not only for the first, but for all candidates. Furthermore, we concluded that there is a positive bias in giving points, after the contestants have already cooked. The comparison with a simpler optimizing strategy, the so called secretary problem, showed a lot of similarities.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
Vacancy-Hydrogen Interaction in Niobium during Low-Temperature Baking
Authors:
Marc Wenskat,
Jakub Cizek,
Maciej Oskar Liedke,
Maik Butterling,
Christopher Bate,
Peter Hausild,
Eric Hirschmann,
Andreas Wagner,
Hans Weise
Abstract:
A recently discovered modified low-temperature baking leads to reduced surface losses and an increase of the accelerating gradient of superconducting TESLA shape cavities. We will show that the dynamics of vacancy-hydrogen complexes at low-temperature baking lead to a suppression of lossy nanohydrides at 2\,K and thus a significant enhancement of accelerator performance. Utilizing Doppler broadeni…
▽ More
A recently discovered modified low-temperature baking leads to reduced surface losses and an increase of the accelerating gradient of superconducting TESLA shape cavities. We will show that the dynamics of vacancy-hydrogen complexes at low-temperature baking lead to a suppression of lossy nanohydrides at 2\,K and thus a significant enhancement of accelerator performance. Utilizing Doppler broadening Positron Annihilation Spectroscopy, Positron Annihilation Lifetime Spectroscopy and instrumented nanoindentation, samples made from European XFEL niobium sheets were investigated. We studied the evolution of vacancies in bulk samples and in the sub-surface region and their interaction with hydrogen at different temperature levels during {\it in-situ} and {\it ex-situ} annealing.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Multi-objective design optimization of a Quadrupole Resonator under uncertainties
Authors:
Piotr Putek,
Shahnam Gorgi Zadeh,
Marc Wenskat,
Ursula van Rienen
Abstract:
For a precise determination of the radio frequency (RF) properties of superconducting materials, a calorimetric measurement is carried out with the aid of a so-called Quadrupole Resonator (QPR). This procedure is affected by certain systematic measurement errors with various sources of uncertainties. In this paper, to reduce the impact of geometrical uncertainties on the measurement bias, the modi…
▽ More
For a precise determination of the radio frequency (RF) properties of superconducting materials, a calorimetric measurement is carried out with the aid of a so-called Quadrupole Resonator (QPR). This procedure is affected by certain systematic measurement errors with various sources of uncertainties. In this paper, to reduce the impact of geometrical uncertainties on the measurement bias, the modified steepest descent method is used for the multi-objective shape optimization of a QPR {in terms of an expectation measure}. Thereby, variations of geometrical parameters are modeled by the Polynomial Chaos (PC) expansion technique. Then, the resulting Maxwell's eigenvalue problem with random input data is solved using the PC-based stochastic collocation method (PC-SCM). Furthermore, to assess the contribution of the particular geometrical parameters, the variance-based sensitivity analysis is proposed. This allows for modifying the steepest descent algorithm, which results in reducing the computational load needed to find optimal solutions. Finally, optimization results in the form of an efficient approximation of the Pareto front for a three dimensional (3D) model of the QPR are shown.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
First Attempts in Automated Defect Recognition in Superconducting Radio-Frequency Cavities
Authors:
Marc Wenskat
Abstract:
The inner surface of superconducting cavities plays a crucial role to achieve highest accelerating fields. The industrial fabrication of cavities for the European X-Ray Free Electron Laser (EXFEL) and the International Linear Collider (ILC) HiGrade Research Project allowed for an investigation of this interplay with a large sample on different cavities undergoing a standardized procedure. For the…
▽ More
The inner surface of superconducting cavities plays a crucial role to achieve highest accelerating fields. The industrial fabrication of cavities for the European X-Ray Free Electron Laser (EXFEL) and the International Linear Collider (ILC) HiGrade Research Project allowed for an investigation of this interplay with a large sample on different cavities undergoing a standardized procedure. For the serial inspection of the inner surface, the optical inspection robot OBACHT was constructed and to analyze the large amount of data, represented in the images of the inner surface, an image processing and analysis code was developed. New variables to describe the cavity surface were obtained. Two approaches using these variables and images to automatically detect defects has been implemented and tested. In addition, a decision-tree based approach of classifying defect free surfaces regarding their accelerating performance was tested and found to be physically valid.
△ Less
Submitted 18 June, 2019;
originally announced June 2019.
-
Automated Optical Inspection and Image Analysis of Superconducting Radio-Frequency Cavities
Authors:
Marc Wenskat
Abstract:
The inner surface of superconducting cavities plays a crucial role to achieve highest accelerating fields and low losses. For an investigation of this inner surface of more than 100 cavities within the cavity fabrication for the European XFEL and the ILC HiGrade Research Project, an optical inspection robot OBACHT was constructed. To analyze up to 2325 images per cavity, an image processing and an…
▽ More
The inner surface of superconducting cavities plays a crucial role to achieve highest accelerating fields and low losses. For an investigation of this inner surface of more than 100 cavities within the cavity fabrication for the European XFEL and the ILC HiGrade Research Project, an optical inspection robot OBACHT was constructed. To analyze up to 2325 images per cavity, an image processing and analysis code was developed and new variables to describe the cavity surface were obtained. The accuracy of this code is up to 97% and the PPV 99% within the resolution of 15.63 $μ\mathrm{m}$. The optical obtained surface roughness is in agreement with standard profilometric methods. The image analysis algorithm identified and quantified vendor specific fabrication properties as the electron beam welding speed and the different surface roughness due to the different chemical treatments. In addition, a correlation of $ρ= -0.93$ with a significance of $6\,σ$ between an obtained surface variable and the maximal accelerating field was found.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Optical Surface Properties and their RF Limitations of European XFEL Cavities
Authors:
Marc Wenskat
Abstract:
The inner surface of superconducting cavities plays a crucial role to achieve highest accelerating fields and low losses. The industrial fabrication of cavities for the European X-Ray Free Electron Laser (XFEL) and the International Linear Collider (ILC) HiGrade Research Project allowed for an investigation of this interplay. For the serial inspection of the inner surface, the optical inspection r…
▽ More
The inner surface of superconducting cavities plays a crucial role to achieve highest accelerating fields and low losses. The industrial fabrication of cavities for the European X-Ray Free Electron Laser (XFEL) and the International Linear Collider (ILC) HiGrade Research Project allowed for an investigation of this interplay. For the serial inspection of the inner surface, the optical inspection robot OBACHT was constructed and to analyze the large amount of data, represented in the images of the inner surface, an image processing and analysis code was developed and new variables to describe the cavity surface were obtained. This quantitative analysis identified vendor specific surface properties which allow to perform a quality control and assurance during the production. In addition, a strong negative correlation of $ρ= -0.93$ with a significance of $6\,σ$ of the integrated grain boundary area $\sum{\mathrm{A}}$ versus the maximal achievable accelerating field $\mathrm{E_{acc,max}}$ has been found.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Analysis of the cool down related cavity performance of the European XFEL vertical acceptance tests
Authors:
Marc Wenskat,
Jörn Schaffran
Abstract:
It has been reported that the cool down dynamics across $T_c$ has a significant influence on the observed quality factors $Q_0$ of a cavity, which is most likely due to trapped flux. In this document we show the results of the investigation if such a correlation can be observed during the European XFEL cavity production.
It has been reported that the cool down dynamics across $T_c$ has a significant influence on the observed quality factors $Q_0$ of a cavity, which is most likely due to trapped flux. In this document we show the results of the investigation if such a correlation can be observed during the European XFEL cavity production.
△ Less
Submitted 13 September, 2017; v1 submitted 21 September, 2016;
originally announced September 2016.
