-
Real-time antiproton annihilation vertexing with sub-micron resolution
Authors:
M. Berghold,
D. Orsucci,
F. Guatieri,
S. Alfaro,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
A. Chehaimi,
G. Consolati,
M. Doser,
K. Eliaszuk,
R. Ferguson,
M. Germann,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova
, et al. (42 additional authors not shown)
Abstract:
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric…
▽ More
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}μm$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moiré deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Positronium laser cooling via the $1^3S$-$2^3P$ transition with a broadband laser pulse
Authors:
L. T. Glöggler,
N. Gusakova,
B. Rienäcker,
A. Camper,
R. Caravita,
S. Huck,
M. Volponi,
T. Wolz,
L. Penasa,
V. Krumins,
F. Gustafsson,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
F. Castelli,
R. Ciuryło,
D. Comparat,
G. Consolati,
M. Doser,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
S. Haider,
M. A. Janik
, et al. (27 additional authors not shown)
Abstract:
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground stat…
▽ More
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived $3^3P$ states. The second effect is the one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) K to 170(20) K. We demonstrate a 58(9) % increase in the coldest fraction of the Ps ensemble.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Modeling betatron radiation using particle-in-cell codes for plasma wakefield accelerator diagnostics
Authors:
M. Yadav,
C. Hansel,
B. Naranjo,
G. Andonian,
P. Manwani,
O. Apsimon,
C. P. Welsch,
J. B. Rosenzweig
Abstract:
The characterization of plasma wakefield acceleration experiments using emitted photons from betatron radiation requires numerical models in support of instrumentation of single-shot, double-differential angular-energy spectra. Precision characterization for relevant experiments necessitates covering a wide energy range extending from tens of keV through 10~GeV, with an angular resolution on the o…
▽ More
The characterization of plasma wakefield acceleration experiments using emitted photons from betatron radiation requires numerical models in support of instrumentation of single-shot, double-differential angular-energy spectra. Precision characterization for relevant experiments necessitates covering a wide energy range extending from tens of keV through 10~GeV, with an angular resolution on the order of $100 \;μ\text{rad}$. In this paper, we present a numerical model for betatron radiation from plasma accelerated beams, that are based on integration of Lienard Wiechert (LW) potentials for computed particle trajectories. The particle trajectories are generated in three different ways: first, by particle tracking through idealized fields in the blowout regime of PWFA; second, by obtaining trajectories from the Quasi-static Particle-in-Cell (PIC) code QuickPIC; and third, by obtaining trajectories from the full PIC code OSIRIS. We performed various benchmarks with analytical expressions and the PIC code EPOCH, which uses a Monte-Carlo QED radiation model. Finally, we present simulations of the expected betatron radiation for parameters from the Facility for Advanced Accelerator Experimental Tests II (FACET-II) PWFA and plasma photocathode experiments.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Exploring ultra-high-intensity wakefields in carbon nanotube arrays: an effective plasma-density approach
Authors:
A. Bonatto,
G. Xia,
O. Apsimon,
C. Bontoiu,
E. Kukstas,
V. Rodin,
M. Yadav,
C. P. Welsch,
J. Resta-López
Abstract:
Charged particle acceleration using solid-state nanostructures has attracted attention in recent years as a method of achieving ultra-high-gradient acceleration in the TV/m domain. More concretely, metallic hollow nanostructures could be suitable for particle acceleration through the excitation of wakefields by a laser or a high-intensity charged particle beam in a high-density solid-state plasma.…
▽ More
Charged particle acceleration using solid-state nanostructures has attracted attention in recent years as a method of achieving ultra-high-gradient acceleration in the TV/m domain. More concretely, metallic hollow nanostructures could be suitable for particle acceleration through the excitation of wakefields by a laser or a high-intensity charged particle beam in a high-density solid-state plasma. For instance, due to their special channelling properties as well as optoelectronic and thermo-mechanical properties, carbon nanotubes could be an excellent medium for this purpose. This article investigates the feasibility of generating ultra-high gradient acceleration using carbon nanotube arrays, modelled as solid-state plasmas in conventional particle-in-cell simulations performed in a two-dimensional axisymmetric quasi}-3D geometry. The generation of beam-driven plasma wakefields depending on different parameters of the solid structure is discussed in detail. Furthermore, by adopting an effective plasma-density approach, existing analytical expressions, originally derived for homogeneous plasmas, can be used to describe wakefields driven in periodic non-uniform plasmas.
△ Less
Submitted 8 March, 2023; v1 submitted 23 October, 2022;
originally announced October 2022.
-
Machine learning-based analysis of experimental electron beams and gamma energy distributions
Authors:
M. Yadav,
M. Oruganti,
S. Zhang,
B. Naranjo,
G. Andonian,
Y. Zhuang,
Ö. Apsimon,
C. P. Welsch,
J. B. Rosenzweig
Abstract:
The photon flux resulting from high-energy electron beam interactions with high field systems, such as in the upcoming FACET-II experiments at SLAC National Accelerator Laboratory, may give deep insight into the electron beam's underlying dynamics at the interaction point. Extraction of this information is an intricate process, however. To demonstrate how to approach this challenge with modern met…
▽ More
The photon flux resulting from high-energy electron beam interactions with high field systems, such as in the upcoming FACET-II experiments at SLAC National Accelerator Laboratory, may give deep insight into the electron beam's underlying dynamics at the interaction point. Extraction of this information is an intricate process, however. To demonstrate how to approach this challenge with modern methods, this paper utilizes data from simulated plasma wakefield acceleration-derived betatron radiation experiments and high-field laser-electron-based radiation production to determine reliable methods of reconstructing key beam and interaction properties. For these measurements, recovering the emitted 200 keV to 10 GeV photon energy spectra from two advanced spectrometers now being commissioned requires testing multiple methods to finalize a pipeline from their responses to incident electron beam information. In each case, we compare the performance of: neural networks, which detect patterns between data sets through repeated training; maximum likelihood estimation (MLE), a statistical technique used to determine unknown parameters from the distribution of observed data; and a hybrid approach combining the two. Further, in the case of photons with energies above 30 MeV, we also examine the efficacy of QR decomposition, a matrix decomposition method. The betatron radiation and the high-energy photon cases demonstrate the effectiveness of a hybrid ML-MLE approach, while the high-field electrodynamics interaction and the low-energy photon cases showcased the machine learning (ML) model's efficiency in the presence of noise. As such, while there is utility in all the methods, the ML-MLE hybrid approach proves to be the most generalizable.
△ Less
Submitted 23 September, 2023; v1 submitted 24 September, 2022;
originally announced September 2022.
-
Characterization of a supersonic gas jet for charged particle beam profile monitor
Authors:
H. D. Zhang,
A. Salehilashkajani,
O. Sedlacek,
C. P. Welsch
Abstract:
In present work, we report an experimental method to measure the density and distribution of a supersonic gas jet used for charged particle beam profile monitoring. The density of the gas jet used in this monitor was in the range of $10^{14}$ - $10^{17}$ molecules/$m^3$.
In present work, we report an experimental method to measure the density and distribution of a supersonic gas jet used for charged particle beam profile monitoring. The density of the gas jet used in this monitor was in the range of $10^{14}$ - $10^{17}$ molecules/$m^3$.
△ Less
Submitted 6 September, 2022; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Analysis of Proton Bunch Parameters in the AWAKE Experiment
Authors:
V. Hafych,
A. Caldwell,
R. Agnello,
C. C. Ahdida,
M. Aladi,
M. C. Amoedo Goncalves,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
P. N. Burrows,
B. Buttenschön,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
A. Dexter,
S. Doebert
, et al. (63 additional authors not shown)
Abstract:
A precise characterization of the incoming proton bunch parameters is required to accurately simulate the self-modulation process in the Advanced Wakefield Experiment (AWAKE). This paper presents an analysis of the parameters of the incoming proton bunches used in the later stages of the AWAKE Run 1 data-taking period. The transverse structure of the bunch is observed at multiple positions along t…
▽ More
A precise characterization of the incoming proton bunch parameters is required to accurately simulate the self-modulation process in the Advanced Wakefield Experiment (AWAKE). This paper presents an analysis of the parameters of the incoming proton bunches used in the later stages of the AWAKE Run 1 data-taking period. The transverse structure of the bunch is observed at multiple positions along the beamline using scintillating or optical transition radiation screens. The parameters of a model that describes the bunch transverse dimensions and divergence are fitted to represent the observed data using Bayesian inference. The analysis is tested on simulated data and then applied to the experimental data.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Simulation and Experimental Study of Proton Bunch Self-Modulation in Plasma with Linear Density Gradients
Authors:
P. I. Morales Guzmán,
P. Muggli,
R. Agnello,
C. C. Ahdida,
M. Aladi,
M. C. Amoedo Goncalves,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
F. Braunmüller,
P. N. Burrows,
B. Buttenschön,
A. Caldwell,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter
, et al. (66 additional authors not shown)
Abstract:
We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported in arXiv:2007.14894v2: with negative gradients, the charge of the modulated bunch is lower than with positive gradients. In addition, the bunch modulation frequency vari…
▽ More
We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported in arXiv:2007.14894v2: with negative gradients, the charge of the modulated bunch is lower than with positive gradients. In addition, the bunch modulation frequency varies with gradient. Simulation results show that dephasing of the wakefields with respect to the relativistic protons along the plasma is the main cause for the loss of charge. The study of the modulation frequency reveals details about the evolution of the self-modulation process along the plasma. In particular for negative gradients, the modulation frequency across time-resolved images of the bunch indicates the position along the plasma where protons leave the wakefields. Simulations and experimental results are in excellent agreement.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Medipix3 for dosimetry and real-time beam monitoring: first tests at a 60 MeV proton therapy facility
Authors:
J. S. L. Yap,
N. J. S. Bal,
A. Kacperek,
J. Resta López,
C. P. Welsch
Abstract:
Charged particle therapy (CPT) is an advanced modality of radiation therapy which has grown rapidly worldwide, driven by recent developments in technology and methods of delivery. To ensure safe and high quality treatments, various instruments are used for a range of different measurements such as for quality assurance, monitoring and dosimetry purposes. With the emergence of new and enhanced deli…
▽ More
Charged particle therapy (CPT) is an advanced modality of radiation therapy which has grown rapidly worldwide, driven by recent developments in technology and methods of delivery. To ensure safe and high quality treatments, various instruments are used for a range of different measurements such as for quality assurance, monitoring and dosimetry purposes. With the emergence of new and enhanced delivery techniques, systems with improved capabilities are needed to exceed existing performance limitations of conventional tools. The Medipix3 is a hybrid pixel detector able to count individual protons with millisecond time resolution at clinical flux with near instant readout and count rate linearity. The system has previously demonstrated use in medical and other applications, showing wide versatility and potential for particle therapy. In this work we present measurements of the Medipix3 detector in the 60 MeV ocular proton therapy beamline at the Clatterbridge Cancer Centre, UK. The beam current and lateral beam profiles were evaluated at multiple positions in the treatment line and compared with EBT3 Gafchromic film. The recorded count rate linearity and temporal analysis of the beam structure was measured with Medipix3 across the full range of available beam intensities, up to $3.12 \times 10^{10}$ protons/s. We explore the capacity of Medipix3 to provide non-reference measurements and its applicability as a tool for dosimetry and beam monitoring for CPT. This is the first known time the performance of the Medipix3 detector technology has been tested within a clinical, high proton flux environment.
△ Less
Submitted 15 September, 2021; v1 submitted 5 July, 2021;
originally announced July 2021.
-
Transition between Instability and Seeded Self-Modulation of a Relativistic Particle Bunch in Plasma
Authors:
F. Batsch,
P. Muggli,
R. Agnello,
C. C. Ahdida,
M. C. Amoedo Goncalves,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
P. Blanchard,
F. Braunmüller,
P. N. Burrows,
B. Buttenschön,
A. Caldwell,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
H. L. Deubner,
S. Doebert,
J. Farmer
, et al. (72 additional authors not shown)
Abstract:
We use a relativistic ionization front to provide various initial transverse wakefield amplitudes for the self-modulation of a long proton bunch in plasma. We show experimentally that, with sufficient initial amplitude ($\ge(4.1\pm0.4)$ MV/m), the phase of the modulation along the bunch is reproducible from event to event, with 3 to 7% (of 2$π$) rms variations all along the bunch. The phase is not…
▽ More
We use a relativistic ionization front to provide various initial transverse wakefield amplitudes for the self-modulation of a long proton bunch in plasma. We show experimentally that, with sufficient initial amplitude ($\ge(4.1\pm0.4)$ MV/m), the phase of the modulation along the bunch is reproducible from event to event, with 3 to 7% (of 2$π$) rms variations all along the bunch. The phase is not reproducible for lower initial amplitudes. We observe the transition between these two regimes. Phase reproducibility is essential for deterministic external injection of particles to be accelerated.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Experimental study of extended timescale dynamics of a plasma wakefield driven by a self-modulated proton bunch
Authors:
J. Chappell,
E. Adli,
R. Agnello,
M. Aladi,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
P. N. Burrows,
B. Buttenschön,
A. Caldwell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
L. H. Deubner,
A. Dexter,
G. P. Djotyan,
S. Doebert
, et al. (74 additional authors not shown)
Abstract:
Plasma wakefield dynamics over timescales up to 800 ps, approximately 100 plasma periods, are studied experimentally at the Advanced Wakefield Experiment (AWAKE). The development of the longitudinal wakefield amplitude driven by a self-modulated proton bunch is measured using the external injection of witness electrons that sample the fields. In simulation, resonant excitation of the wakefield cau…
▽ More
Plasma wakefield dynamics over timescales up to 800 ps, approximately 100 plasma periods, are studied experimentally at the Advanced Wakefield Experiment (AWAKE). The development of the longitudinal wakefield amplitude driven by a self-modulated proton bunch is measured using the external injection of witness electrons that sample the fields. In simulation, resonant excitation of the wakefield causes plasma electron trajectory crossing, resulting in the development of a potential outside the plasma boundary as electrons are transversely ejected. Trends consistent with the presence of this potential are experimentally measured and their dependence on wakefield amplitude are studied via seed laser timing scans and electron injection delay scans.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Proton beam defocusing in AWAKE: comparison of simulations and measurements
Authors:
A. A. Gorn,
M. Turner,
E. Adli,
R. Agnello,
M. Aladi,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
P. N. Burrows,
B. Buttenschon,
A. Caldwell,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
L. H. Deubner,
A. Dexter
, et al. (74 additional authors not shown)
Abstract:
In 2017, AWAKE demonstrated the seeded self-modulation (SSM) of a 400 GeV proton beam from the Super Proton Synchrotron (SPS) at CERN. The angular distribution of the protons deflected due to SSM is a quantitative measure of the process, which agrees with simulations by the two-dimensional (axisymmetric) particle-in-cell code LCODE. Agreement is achieved for beam populations between $10^{11}$ and…
▽ More
In 2017, AWAKE demonstrated the seeded self-modulation (SSM) of a 400 GeV proton beam from the Super Proton Synchrotron (SPS) at CERN. The angular distribution of the protons deflected due to SSM is a quantitative measure of the process, which agrees with simulations by the two-dimensional (axisymmetric) particle-in-cell code LCODE. Agreement is achieved for beam populations between $10^{11}$ and $3 \times 10^{11}$ particles, various plasma density gradients ($-20 ÷20\%$) and two plasma densities ($2\times 10^{14} \text{cm}^{-3}$ and $7 \times 10^{14} \text{cm}^{-3}$). The agreement is reached only in the case of a wide enough simulation box (at least five plasma wavelengths).
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
-
Experimental observation of proton bunch modulation in a plasma, at varying plasma densities
Authors:
E. Adli,
A. Ahuja,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
D. Barrientos,
M. M. Barros,
J. Batkiewicz,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
B. Biskup,
A. Boccardi,
T. Bogey,
T. Bohl,
C. Bracco,
F. Braunmüller,
S. Burger,
G. Burt,
S. Bustamante,
B. Buttenschön,
A. Caldwell,
M. Cascella,
J. Chappell
, et al. (87 additional authors not shown)
Abstract:
We give direct experimental evidence for the observation of the full transverse self-modulation of a relativistic proton bunch propagating through a dense plasma. The bunch exits the plasma with a density modulation resulting from radial wakefield effects with a period reciprocal to the plasma frequency. We show that the modulation is seeded by using an intense laser pulse co-propagating with the…
▽ More
We give direct experimental evidence for the observation of the full transverse self-modulation of a relativistic proton bunch propagating through a dense plasma. The bunch exits the plasma with a density modulation resulting from radial wakefield effects with a period reciprocal to the plasma frequency. We show that the modulation is seeded by using an intense laser pulse co-propagating with the proton bunch which creates a relativistic ionization front within the bunch. We show by varying the plasma density over one order of magnitude that the modulation period scales with the expected dependence on the plasma density.
△ Less
Submitted 1 April, 2019; v1 submitted 12 September, 2018;
originally announced September 2018.
-
Acceleration of electrons in the plasma wakefield of a proton bunch
Authors:
The AWAKE Collaboration,
E. Adli,
A. Ahuja,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
D. Barrientos,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
T. Bohl,
C. Bracco,
F. Braunmueller,
G. Burt,
B. Buttenschoen,
A. Caldwell,
M. Cascella,
J. Chappell,
E. Chevallay,
M. Chung,
D. Cooke,
H. Damerau,
L. Deacon,
L. H. Deubner
, et al. (69 additional authors not shown)
Abstract:
High energy particle accelerators have been crucial in providing a deeper understanding of fundamental particles and the forces that govern their interactions. In order to increase the energy or reduce the size of the accelerator, new acceleration schemes need to be developed. Plasma wakefield acceleration, in which the electrons in a plasma are excited, leading to strong electric fields, is one s…
▽ More
High energy particle accelerators have been crucial in providing a deeper understanding of fundamental particles and the forces that govern their interactions. In order to increase the energy or reduce the size of the accelerator, new acceleration schemes need to be developed. Plasma wakefield acceleration, in which the electrons in a plasma are excited, leading to strong electric fields, is one such promising novel acceleration technique. Pioneering experiments have shown that an intense laser pulse or electron bunch traversing a plasma, drives electric fields of 10s GV/m and above. These values are well beyond those achieved in conventional RF accelerators which are limited to ~0.1 GV/m. A limitation of laser pulses and electron bunches is their low stored energy, which motivates the use of multiple stages to reach very high energies. The use of proton bunches is compelling, as they have the potential to drive wakefields and accelerate electrons to high energy in a single accelerating stage. The long proton bunches currently available can be used, as they undergo self-modulation, a particle-plasma interaction which longitudinally splits the bunch into a series of high density microbunches, which then act resonantly to create large wakefields. The AWAKE experiment at CERN uses intense bunches of protons, each of energy 400 GeV, with a total bunch energy of 19 kJ, to drive a wakefield in a 10 m long plasma. Bunches of electrons are injected into the wakefield formed by the proton microbunches. This paper presents measurements of electrons accelerated up to 2 GeV at AWAKE. This constitutes the first demonstration of proton-driven plasma wakefield acceleration. The potential for this scheme to produce very high energy electron bunches in a single accelerating stage means that the results shown here are a significant step towards the development of future high energy particle accelerators.
△ Less
Submitted 11 October, 2018; v1 submitted 29 August, 2018;
originally announced August 2018.
-
Study of ultra-high gradient acceleration in carbon nanotube arrays
Authors:
J. Resta-López,
A. Alexandrova,
V. Rodin,
Y. Wei,
C. P. Welsch,
Y. Li,
G. Xia,
Y. Zhao
Abstract:
Solid-state based wakefield acceleration of charged particles was previously proposed to obtain extremely high gradients on the order of 1-10 TeV/m. In recent years the possibility of using either metallic or carbon nanotube structures is attracting new attention. The use of carbon nanotubes would allow us to accelerate and channel particles overcoming many of the limitations of using natural crys…
▽ More
Solid-state based wakefield acceleration of charged particles was previously proposed to obtain extremely high gradients on the order of 1-10 TeV/m. In recent years the possibility of using either metallic or carbon nanotube structures is attracting new attention. The use of carbon nanotubes would allow us to accelerate and channel particles overcoming many of the limitations of using natural crystals, e.g. channeling aperture restrictions and thermal-mechanical robustness issues. In this paper, we propose a potential proof of concept experiment using carbon nanotube arrays, assuming the beam parameters and conditions of accelerator facilities already available, such as CLEAR at CERN and CLARA at Daresbury. The acceleration performance of carbon nanotube arrays is investigated by using a 2D Particle-In-Cell (PIC) model based on a multi-hollow plasma. Optimum experimental beam parameters and system layout are discussed.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
AWAKE readiness for the study of the seeded self-modulation of a 400\,GeV proton bunch
Authors:
P. Muggli,
E. Adli,
R. Apsimon,
F. Asmus,
R. Baartman,
A. -M. Bachmann,
M. Barros Marin,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
B. Biskup,
A. Boccardi,
T. Bogey,
T. Bohl,
C. Bracco,
F. Braunmuller,
S. Burger,
G. Burt,
S. Bustamante,
B. Buttenschon,
A. Butterworth,
A. Caldwell,
M. Cascella,
E. Chevallay
, et al. (82 additional authors not shown)
Abstract:
AWAKE is a proton-driven plasma wakefield acceleration experiment. % We show that the experimental setup briefly described here is ready for systematic study of the seeded self-modulation of the 400\,GeV proton bunch in the 10\,m-long rubidium plasma with density adjustable from 1 to 10$\times10^{14}$\,cm$^{-3}$. % We show that the short laser pulse used for ionization of the rubidium vapor propag…
▽ More
AWAKE is a proton-driven plasma wakefield acceleration experiment. % We show that the experimental setup briefly described here is ready for systematic study of the seeded self-modulation of the 400\,GeV proton bunch in the 10\,m-long rubidium plasma with density adjustable from 1 to 10$\times10^{14}$\,cm$^{-3}$. % We show that the short laser pulse used for ionization of the rubidium vapor propagates all the way along the column, suggesting full ionization of the vapor. % We show that ionization occurs along the proton bunch, at the laser time and that the plasma that follows affects the proton bunch. %
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
Beam Dynamics Studies and Design Optimisation of New Low Energy Antiproton Facilities
Authors:
Javier Resta-Lopez,
James R. Hunt,
Carsten P. Welsch
Abstract:
Antiprotons, stored and cooled at low energies in a storage ring or at rest in traps, are highly desirable for the investigation of a large number of basic questions on fundamental interactions. This includes the static structure of antiprotonic atomic systems and the time-dependent quantum dynamics of correlated systems. The Antiproton Decelerator (AD) at CERN is currently the worlds only low ene…
▽ More
Antiprotons, stored and cooled at low energies in a storage ring or at rest in traps, are highly desirable for the investigation of a large number of basic questions on fundamental interactions. This includes the static structure of antiprotonic atomic systems and the time-dependent quantum dynamics of correlated systems. The Antiproton Decelerator (AD) at CERN is currently the worlds only low energy antiproton factory dedicated to antimatter experiments. New antiproton facilities, such as the Extra Low ENergy Antiproton ring (ELENA) at CERN and the Ultra-low energy Storage Ring (USR) at FLAIR, will open unique possibilities. They will provide cooled, high quality beams of extra-low energy antiprotons at intensities exceeding those achieved presently at the AD by factors of ten to one hundred. These facilities, operating in the energy regime between 100 keV down to 20 keV, face several design and beam dynamics challenges, for example nonlinearities, space charge and scattering effects limiting beam life time. Detailed investigations into the low energy and long term beam dynamics have been carried out to address many of those challenges towards the design optimisation. Results from these studies are presented in this contribution, showing some examples for ELENA.
△ Less
Submitted 21 June, 2016;
originally announced June 2016.
-
AWAKE, The Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN
Authors:
E. Gschwendtner,
E. Adli,
L. Amorim,
R. Apsimon,
R. Assmann,
A. -M. Bachmann,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
R. Bingham,
B. Biskup,
T. Bohl,
C. Bracco,
P. N. Burrows,
G. Burt,
B. Buttenschon,
A. Butterworth,
A. Caldwell,
M. Cascella,
E. Chevallay,
S. Cipiccia,
H. Damerau,
L. Deacon,
P. Dirksen
, et al. (66 additional authors not shown)
Abstract:
The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton be…
▽ More
The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton beam bunches from the SPS. The first experiments will focus on the self-modulation instability of the long (rms ~12 cm) proton bunch in the plasma. These experiments are planned for the end of 2016. Later, in 2017/2018, low energy (~15 MeV) electrons will be externally injected to sample the wakefields and be accelerated beyond 1 GeV. The main goals of the experiment will be summarized. A summary of the AWAKE design and construction status will be presented.
△ Less
Submitted 17 December, 2015;
originally announced December 2015.
-
Path to AWAKE: Evolution of the concept
Authors:
A. Caldwell,
E. Adli,
L. Amorim,
R. Apsimon,
T. Argyropoulos,
R. Assmann,
A. -M. Bachmann,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
R. Bingham,
B. Biskup,
T. Bohl,
C. Bracco,
P. N. Burrows,
G. Burt,
B. Buttenschon,
A. Butterworth,
M. Cascella,
S. Chattopadhyay,
E. Chevallay,
S. Cipiccia,
H. Damerau,
L. Deacon
, et al. (96 additional authors not shown)
Abstract:
This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experi…
▽ More
This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in [1].
△ Less
Submitted 29 November, 2015;
originally announced November 2015.
-
A plasma wakefield acceleration experiment using CLARA beam
Authors:
G. Xia,
D. Angal-Kalinin,
J. Clarke,
J. Smith,
E. Cormier-Michel,
J. Jones,
P. H. Williams,
J. W. Mckenzie,
B. L. Militsyn,
K. Hanahoe,
O. Mete,
A. Aimidula,
C. P. Welsch
Abstract:
We propose a Plasma Accelerator Research Station (PARS) based at proposed FEL test facility CLARA (Compact Linear Accelerator for Research and Applications) at Daresbury Laboratory. The idea is to use the relativistic electron beam from CLARA, to investigate some key issues in electron beam transport and in electron beam driven plasma wakefield acceleration, e.g. high gradient plasma wakefield exc…
▽ More
We propose a Plasma Accelerator Research Station (PARS) based at proposed FEL test facility CLARA (Compact Linear Accelerator for Research and Applications) at Daresbury Laboratory. The idea is to use the relativistic electron beam from CLARA, to investigate some key issues in electron beam transport and in electron beam driven plasma wakefield acceleration, e.g. high gradient plasma wakefield excitation driven by a relativistic electron bunch, two bunch experiment for CLARA beam energy doubling, high transformer ratio, long bunch self-modulation and some other advanced beam dynamics issues. This paper presents the feasibility studies of electron beam transport to meet the requirements for beam driven wakefield acceleration and presents the plasma wakefield simulation results based on CLARA beam parameters. Other possible experiments which can be conducted at the PARS beam line are also discussed.
△ Less
Submitted 24 April, 2014;
originally announced April 2014.
-
Annihilation of low energy antiprotons in silicon
Authors:
S. Aghion,
O. Ahlén,
A. S. Belov,
G. Bonomi,
P. Bräunig,
J. Bremer,
R. S. Brusa,
G. Burghart,
L. Cabaret,
M. Caccia,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
R. Ferragut,
A. Fontana,
P. Genova
, et al. (34 additional authors not shown)
Abstract:
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straig…
▽ More
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$%$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations.
We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeV
△ Less
Submitted 11 March, 2014; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Prospects for measuring the gravitational free-fall of antihydrogen with emulsion detectors
Authors:
AEgIS Collaboration,
S. Aghion,
O. Ahlén,
C. Amsler,
A. Ariga,
T. Ariga,
A. S. Belov,
G. Bonomi,
P. Bräunig,
J. Bremer,
R. S. Brusa,
L. Cabaret,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
A. Ereditato
, et al. (46 additional authors not shown)
Abstract:
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the…
▽ More
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the time of flight. Nuclear emulsions can measure the annihilation vertex of antihydrogen atoms with a precision of about 1 - 2 microns r.m.s. We present here results for emulsion detectors operated in vacuum using low energy antiprotons from the CERN antiproton decelerator. We compare with Monte Carlo simulations, and discuss the impact on the AEgIS project.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Design of a novel electrostatic ion storage ring at KACST
Authors:
M. O. A. El Ghazaly,
S. M. Alshammari,
C. P. Welsch,
H. H. Alharbi
Abstract:
A new electrostatic storage ring for beams at energies up to 30keV.q is currently under development at the National Centre for Mathematics and Physics (NCMP), King Abdulaziz City for Science and Technology (KACST). The ring design is based on the existing electrostatic storage rings, but stretches significantly beyond them in that it shall form the core of a unique flexible experimental facility a…
▽ More
A new electrostatic storage ring for beams at energies up to 30keV.q is currently under development at the National Centre for Mathematics and Physics (NCMP), King Abdulaziz City for Science and Technology (KACST). The ring design is based on the existing electrostatic storage rings, but stretches significantly beyond them in that it shall form the core of a unique flexible experimental facility at KACST. The lattice of this ring has been designed in a way that enables the use of state-of-the-art experimental methods to study electron-ion, laser-ion, and ion-neutral beams interactions. The lattice design also allows for a future upgrade of the ring to a double storage ring structure that would enable ion-ion beam interactions to be performed. In this paper, we present the design of this ring with a focus on beam dynamics calculations for the 7o single-bend racetrack layout. The study is principally based on the SIMION8 program. We complemented this study further by using purpose-written routine and MAD-X simulation code. An in-depth investigation into beam stability under consideration of non-linear field components in the electrostatic optical elements, is presented. Finally, different working points and stability regions are discussed.
△ Less
Submitted 22 February, 2013;
originally announced February 2013.
-
Experimental evidence for electric surface resistance in niobium
Authors:
Tobias Junginger,
Sarah Aull,
Wolfgang Weingarten,
Carsten P. Welsch
Abstract:
Identifying the loss mechanisms of niobium cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate current limitations. For several cavities an increasing surface resistance above a threshold field, saturating at higher field has been observed. Measurements on samples give evidence that this effect is caused by t…
▽ More
Identifying the loss mechanisms of niobium cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate current limitations. For several cavities an increasing surface resistance above a threshold field, saturating at higher field has been observed. Measurements on samples give evidence that this effect is caused by the surface electric field. The measured temperature and frequency dependence is consistent with a model that accounts for these losses by interface tunnel exchange between localized states in oxides formed along grain boundaries and the adjacent superconductor.
△ Less
Submitted 23 November, 2017; v1 submitted 12 February, 2013;
originally announced February 2013.
-
Beam Halo Imaging with a Digital Optical Mask
Authors:
H. D. Zhang,
R. B. Fiorito,
A. G. Shkvarunets,
R. A. Kishek,
C. P. Welsch
Abstract:
Beam halo is an important factor in any high intensity accelerator. It can cause difficulties in the control of the beam, emittance growth, particle loss and even damage to the accelerator. It is therefore essential to understand the mechanisms of halo formation and its dynamics in order to control and minimize its effects. Experimental measurement of the halo distribution is an important tool for…
▽ More
Beam halo is an important factor in any high intensity accelerator. It can cause difficulties in the control of the beam, emittance growth, particle loss and even damage to the accelerator. It is therefore essential to understand the mechanisms of halo formation and its dynamics in order to control and minimize its effects. Experimental measurement of the halo distribution is an important tool for such studies. In this paper, we present a new adaptive masking method that we have developed to image beam halo, which uses a digital micro-mirror-array device (DMD). This method has been thoroughly investigated in the laboratory using laser and white light sources, and with real beams produced by the University of Maryland Electron Ring (UMER). A high dynamic range ~10(5) has been demonstrated with this new method and recent studies indicate that this number can be exceeded for more intense beams by at least an order of magnitude. The method is flexible, easy to setup and can be used at any accelerator or light source. We present the results of our measurements of the performance of the method and images of beam halos produced under various experimental conditions.
△ Less
Submitted 10 March, 2012;
originally announced March 2012.
-
Development of Rebunching Cavities at IAP
Authors:
C. P. Welsch,
K. -U. Kuehnel,
A. Schempp
Abstract:
A focus of work at IAP has been the development and optimization of spiral loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These cavities feature a high efficiency, a compact design and a big variety of possible fields of application. They find use both as bunchers and post accelerators to vary the final energy of the beam. In comparison to other available designs, the a…
▽ More
A focus of work at IAP has been the development and optimization of spiral loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These cavities feature a high efficiency, a compact design and a big variety of possible fields of application. They find use both as bunchers and post accelerators to vary the final energy of the beam. In comparison to other available designs, the advantage of these structures lies in their small size. Furthermore they can easily be tuned to the required resonance frequency by varying the length of the spiral. Due to the small size of the cavities the required budget can also be kept low. Here, two slightly different types of spiral loaded cavities, which were built for the REX-ISOLDE project at CERN and the intensity upgrade program at GSI are being discussed.
△ Less
Submitted 28 July, 2000;
originally announced July 2000.
-
Development of rebunching cavities at IAP
Authors:
C. P. Welsch,
K. U. Kuehnel,
A. Schempp
Abstract:
A focus of work at IAP has been the development and optimization of spiral loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These cavities feature a high efficiency, a compact design and a big variety of possible fields of application. They find use both as bunchers and post accelerators to vary the final energy of the beam. In comparison to other available designs, the a…
▽ More
A focus of work at IAP has been the development and optimization of spiral loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These cavities feature a high efficiency, a compact design and a big variety of possible fields of application. They find use both as bunchers and post accelerators to vary the final energy of the beam. In comparison to other available designs, the advantage of these structures lies in their small size. Furthermore they can easily be tuned to the required resonance frequency by varying the length of the spiral. Due to the small size of the cavities the required budget can also be kept low. Here, two slightly different types of spiral loaded cavities, which were built for the REX-ISOLDE project at CERN and the intensity upgrade program at GSI are being discussed.
△ Less
Submitted 17 August, 2000; v1 submitted 26 July, 2000;
originally announced July 2000.
