-
Microresonator Kerr frequency combs with high conversion efficiency
Authors:
Xiaoxiao Xue,
Pei-Hsun Wang,
Yi Xuan,
Minghao Qi,
Andrew M. Weiner
Abstract:
Microresonator-based Kerr frequency comb (microcomb) generation can potentially revolutionize a variety of applications ranging from telecommunications to optical frequency synthesis. However, phase-locked microcombs have generally had low conversion efficiency limited to a few percent. Here we report experimental results that achieve ~30% conversion efficiency (~200 mW on-chip comb power excludin…
▽ More
Microresonator-based Kerr frequency comb (microcomb) generation can potentially revolutionize a variety of applications ranging from telecommunications to optical frequency synthesis. However, phase-locked microcombs have generally had low conversion efficiency limited to a few percent. Here we report experimental results that achieve ~30% conversion efficiency (~200 mW on-chip comb power excluding the pump) in the fiber telecommunication band with broadband mode-locked dark-pulse combs. We present a general analysis on the efficiency which is applicable to any phase-locked microcomb state. The effective coupling condition for the pump as well as the duty cycle of localized time-domain structures play a key role in determining the conversion efficiency. Our observation of high efficiency comb states is relevant for applications such as optical communications which require high power per comb line.
△ Less
Submitted 13 October, 2016; v1 submitted 4 October, 2016;
originally announced October 2016.
-
Single Shot Digital Holography Using Iterative Reconstruction with Alternating Updates of Amplitude and Phase
Authors:
Dennis J. Lee,
Charles A. Bouman,
Andrew M. Weiner
Abstract:
We present an image recovery approach to improve amplitude and phase reconstruction from single shot digital holograms, using iterative reconstruction with alternating updates. This approach allows the flexibility to apply different priors to amplitude and phase, improves phase reconstruction in image areas with low amplitudes, and does not require phase unwrap** for regularization. Phantom simu…
▽ More
We present an image recovery approach to improve amplitude and phase reconstruction from single shot digital holograms, using iterative reconstruction with alternating updates. This approach allows the flexibility to apply different priors to amplitude and phase, improves phase reconstruction in image areas with low amplitudes, and does not require phase unwrap** for regularization. Phantom simulations and experimental measurements of a grating sample both demonstrate that the proposed method helps to reduce noise and resolve finer features. The improved image reconstruction from this technique will benefit the many applications of digital holography.
△ Less
Submitted 2 October, 2016; v1 submitted 9 September, 2016;
originally announced September 2016.
-
Optical Phase Imaging Using Synthetic Aperture Illumination and Phase Retrieval
Authors:
Dennis J. Lee,
Andrew M. Weiner
Abstract:
We perform quantitative phase imaging using phase retrieval to implement synthetic aperture imaging. Compared to digital holography, the developed technique is simpler, less expensive, and more stable.
We perform quantitative phase imaging using phase retrieval to implement synthetic aperture imaging. Compared to digital holography, the developed technique is simpler, less expensive, and more stable.
△ Less
Submitted 5 September, 2016;
originally announced September 2016.
-
Second-harmonic assisted four-wave mixing in chip-based microresonator frequency comb generation
Authors:
Xiaoxiao Xue,
François Leo,
Yi Xuan,
Jose A. Jaramillo-Villegas,
Pei-Hsun Wang,
Daniel E. Leaird,
Miro Erkintalo,
Minghao Qi,
Andrew M. Weiner
Abstract:
Simultaneous Kerr comb formation and second-harmonic generation with on-chip microresonators can greatly facilitate comb self-referencing for optical clocks and frequency metrology. Moreover, the presence of both second- and third-order nonlinearities results in complex cavity dynamics that is of high scientific interest but is still far from well understood. Here, we demonstrate that the interact…
▽ More
Simultaneous Kerr comb formation and second-harmonic generation with on-chip microresonators can greatly facilitate comb self-referencing for optical clocks and frequency metrology. Moreover, the presence of both second- and third-order nonlinearities results in complex cavity dynamics that is of high scientific interest but is still far from well understood. Here, we demonstrate that the interaction between the fundamental and the second-harmonic waves can provide an entirely new way of phase-matching for four-wave mixing in optical microresonators, enabling the generation of optical frequency combs in the normal dispersion regime, under conditions where comb creation is ordinarily prohibited. We derive new coupled time-domain mean-field equations and obtain simulation results showing good qualitative agreement with our experimental observations. Our findings provide a novel way of overcoming the dispersion limit for simultaneous Kerr comb formation and second-harmonic generation, which might prove especially important in the near-visible to visible range where several atomic transitions commonly used for stabilization of optical clocks are located and where the large normal material dispersion is likely to dominate.
△ Less
Submitted 19 November, 2016; v1 submitted 10 July, 2016;
originally announced July 2016.
-
Frequency Comb Generation in 300 nm Thick SiN Concentric-Racetrack-Resonators: Overcoming the Material Dispersion Limit
Authors:
Sangsik Kim,
Kyunghun Han,
Cong Wang,
Jose A. Jaramillo-Villegas,
Xiaoxiao Xue,
Chengying Bao,
Yi Xuan,
Daniel E. Leaird,
Andrew M. Weiner,
Minghao Qi
Abstract:
Kerr nonlinearity based frequency combs and solitons have been generated from on-chip optical microresonators with high quality factors and global or local anomalous dispersion. However, fabrication of such resonators usually requires materials and/or processes that are not standard in semiconductor manufacturing facilities. Moreover, in certain frequency regimes such as visible and ultra-violet,…
▽ More
Kerr nonlinearity based frequency combs and solitons have been generated from on-chip optical microresonators with high quality factors and global or local anomalous dispersion. However, fabrication of such resonators usually requires materials and/or processes that are not standard in semiconductor manufacturing facilities. Moreover, in certain frequency regimes such as visible and ultra-violet, the large normal material dispersion makes it extremely difficult to achieve anomalous dispersion. Here we present a concentric racetrack-shaped resonator that achieves anomalous dispersion in a 300 nm thick silicon nitride film, suitable for semiconductor manufacturing but previously thought to result only in waveguides with high normal dispersion, a high intrinsic Q of 1.5 million, and a novel mode-selective coupling scheme that allows coherent combs to be generated. We also provide evidence suggestive of soliton-like pulse formation in the generated comb. Our method can achieve anomalous dispersion over moderately broad bandwidth for resonators at almost any wavelength while still maintaining material and process compatibility with high-volume semiconductor manufacturing.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Observation of Fermi-Pasta-Ulam Recurrence Induced by Breather Solitons in an Optical Microresonator
Authors:
Chengying Bao,
Jose A. Jaramillo-Villegas,
Yi Xuan,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We present, experimentally and numerically, the observation of Fermi-Pasta-Ulam recurrence induced by breather solitons in a high-Q SiN microresonator. Breather solitons can be excited by increasing the pump power at a relatively small pump phase detuning in microresonators. Out of phase power evolution is observed for groups of comb lines around the center of the spectrum compared to groups of li…
▽ More
We present, experimentally and numerically, the observation of Fermi-Pasta-Ulam recurrence induced by breather solitons in a high-Q SiN microresonator. Breather solitons can be excited by increasing the pump power at a relatively small pump phase detuning in microresonators. Out of phase power evolution is observed for groups of comb lines around the center of the spectrum compared to groups of lines in the spectral wings. The evolution of the power spectrum is not symmetric with respect to the spectrum center. Numerical simulations based on the generalized Lugiato-Lefever equation are in good agreement with the experimental results and unveil the role of stimulated Raman scattering in the symmetry breaking of the power spectrum evolution. Our results shows that optical microresonators can be exploited as a powerful platform for the exploration of soliton dynamics.
△ Less
Submitted 17 October, 2016; v1 submitted 21 June, 2016;
originally announced June 2016.
-
Intracavity characterization of micro-comb generation in the single-soliton regime
Authors:
Pei-Hsun Wang,
Jose A. Jaramillo-Villegas,
Yi Xuan,
Xiaoxiao Xue,
Chengying Bao,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output p…
▽ More
Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output power, our experiments reveal that inside the microcavity, most of the power is in the soliton. Time-domain measurements performed at the drop port provide information that directly reflects the intracavity field. Data confirm a train of bright, close to bandwidth-limited pulses, accompanied by a weak continuous wave (CW) background with a small phase shift relative to the comb.
△ Less
Submitted 10 March, 2016;
originally announced March 2016.
-
Recent Advances in Programmable Photonic-Assisted Ultrabroadband Radio-Frequency Arbitrary Waveform Generation
Authors:
Amir Rashidinejad,
Yihan Li,
Andrew M. Weiner
Abstract:
This paper reviews recent advances in photonic-assisted radio-frequency arbitrary waveform generation (RF-AWG), with emphasis on programmable ultrabroadband microwave and millimeter-wave waveforms. The key enabling components in these techniques are programmable optical pulse sha**, frequency-to-time map** via dispersive propagation, and high-speed photodetection. The main advantages and chall…
▽ More
This paper reviews recent advances in photonic-assisted radio-frequency arbitrary waveform generation (RF-AWG), with emphasis on programmable ultrabroadband microwave and millimeter-wave waveforms. The key enabling components in these techniques are programmable optical pulse sha**, frequency-to-time map** via dispersive propagation, and high-speed photodetection. The main advantages and challenges of several different photonic RF-AWG schemes are discussed. We further review some proof-of-concept demonstrations of ultrabroadband RF-AWG applications, including high-resolution ranging and ultrabroadband non-line-of-sight channel compensation. Finally, we present recent progress toward RF-AWG with increased time aperture and time-bandwidth product.
△ Less
Submitted 13 October, 2015;
originally announced October 2015.
-
Normal-dispersion Microcombs Enabled by Controllable Mode Interactions
Authors:
Xiaoxiao Xue,
Yi Xuan,
Pei-Hsun Wang,
Yang Liu,
Dan E. Leaird,
Minghhao Qi,
Andrew M. Weiner
Abstract:
We demonstrate a scheme incorporating dual coupled microresonators through which mode interactions are intentionally introduced and controlled for Kerr frequency comb (microcomb) generation in the normal dispersion region. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings controlled via an on-chip microheater. Our results show fo…
▽ More
We demonstrate a scheme incorporating dual coupled microresonators through which mode interactions are intentionally introduced and controlled for Kerr frequency comb (microcomb) generation in the normal dispersion region. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings controlled via an on-chip microheater. Our results show for the first time that mode interactions can be programmably tuned to facilitate broadband normal-dispersion microcombs. The proposed scheme increases freedom in microresonator design and may make it possible to generate microcombs in an extended wavelength range (e.g., in the visible) where normal material dispersion is likely to dominate.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Deterministic single soliton generation and compression in microring resonators avoiding the chaotic region
Authors:
Jose A. Jaramillo-Villegas,
Xiaoxiao Xue,
Pei-Hsun Wang,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
A path within the parameter space of detuning and pump power is demonstrated in order to obtain a single cavity soliton (CS) with certainty in SiN microring resonators in the anomalous dispersion regime. Once the single CS state is reached, it is possible to continue a path to compress it, broadening the corresponding single free spectral range (FSR) Kerr frequency comb. The first step to achieve…
▽ More
A path within the parameter space of detuning and pump power is demonstrated in order to obtain a single cavity soliton (CS) with certainty in SiN microring resonators in the anomalous dispersion regime. Once the single CS state is reached, it is possible to continue a path to compress it, broadening the corresponding single free spectral range (FSR) Kerr frequency comb. The first step to achieve this goal is to identify the stable regions in the parameter space via numerical simulations of the Lugiato-Lefever equation (LLE). Later, using this identification, we define a path from the stable modulation instability (SMI) region to the stable cavity solitons (SCS) region avoiding the chaotic and unstable regions.
△ Less
Submitted 19 May, 2015; v1 submitted 13 January, 2015;
originally announced January 2015.
-
Retrieving the Complex Intracavity Pump Field of a Kerr Comb from the Through Port Data
Authors:
Xiaoxiao Xue,
Yi Xuan,
Yang Liu,
Pei-Hsun Wang,
Steven Chen,
Jian Wang,
Dan E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
A method of retrieving the complex intracavity pump field from the through port is proposed, and verified through characterizing the time-domain waveform of a mode-locked comb related to dark soliton formation in a normal-dispersion microresonator.
A method of retrieving the complex intracavity pump field from the through port is proposed, and verified through characterizing the time-domain waveform of a mode-locked comb related to dark soliton formation in a normal-dispersion microresonator.
△ Less
Submitted 4 June, 2014;
originally announced June 2014.
-
Investigation of Mode Coupling in Normal Dispersion Silicon Nitride Microresonators for Kerr Frequency Comb Generation
Authors:
Yang Liu,
Yi Xuan,
Xiaoxiao Xue,
Pei-Hsun Wang,
Steven Chen,
Andrew J. Metcalf,
Jian Wang,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Kerr frequency combs generated from microresonators are the subject of intense study. Most research employs microresonators with anomalous dispersion, for which modulation instability is believed to play a key role in initiation of the comb. Comb generation in normal dispersion microresonators has also been reported but is less well understood. Here we report a detailed investigation of few-moded,…
▽ More
Kerr frequency combs generated from microresonators are the subject of intense study. Most research employs microresonators with anomalous dispersion, for which modulation instability is believed to play a key role in initiation of the comb. Comb generation in normal dispersion microresonators has also been reported but is less well understood. Here we report a detailed investigation of few-moded, normal dispersion silicon nitride microresonators, showing that mode coupling can strongly modify the local dispersion, even changing its sign. We demonstrate a link between mode coupling and initiation of comb generation by showing experimentally, for the first time to our knowledge, pinning of one of the initial comb sidebands near a mode crossing frequency. Associated with this route to comb formation, we observe direct generation of coherent, bandwidth-limited pulses at repetition rates down to 75 GHz, without the need to first pass through a chaotic state.
△ Less
Submitted 23 May, 2014;
originally announced May 2014.
-
Rapidly reconfigurable radio-frequency arbitrary waveforms synthesized on a CMOS photonic chip
Authors:
Jian Wang,
Hao Shen,
Li Fan,
Rui Wu,
Ben Niu,
Leo T. Varghese,
Yi Xuan,
Daniel E. Leaird,
Xi Wang,
Fuwan Gan,
Andrew M. Weiner,
Minghao Qi
Abstract:
Photonic methods of radio-frequency waveform generation and processing provide performance and flexibility over electronic methods due to the ultrawide bandwidth offered by the optical carriers. However, they suffer from lack of integration and slow reconfiguration speed. Here we propose an architecture of integrated photonic RF waveform generation and processing, and implement it on a silicon chi…
▽ More
Photonic methods of radio-frequency waveform generation and processing provide performance and flexibility over electronic methods due to the ultrawide bandwidth offered by the optical carriers. However, they suffer from lack of integration and slow reconfiguration speed. Here we propose an architecture of integrated photonic RF waveform generation and processing, and implement it on a silicon chip fabricated in a semiconductor manufacturing foundry. Our device can generate programmable RF bursts or continuous waveforms with only the light source, electrical drives/controls and detectors being off chip. It turns on and off an individual pulse in the RF burst within 4 nanoseconds, achieving a reconfiguration speed three orders of magnitude faster than thermal tuning. The on-chip optical delay elements offers an integrated approach to accurately manipulate individual RF waveform features without constrains set by the speed and timing jitter of electronics, and should find broad applications ranging from high-speed wireless to defense electronics.
△ Less
Submitted 11 April, 2014;
originally announced April 2014.
-
Mode interaction aided excitation of dark solitons in microresonators constructed of normal dispersion waveguides
Authors:
Xiaoxiao Xue,
Yi Xuan,
Yang Liu,
Pei-Hsun Wang,
Steven Chen,
Jian Wang,
Dan E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Kerr frequency combs from microresonators are now extensively investigated as a potentially portable technology for a variety of applications. Most studies employ anomalous dispersion microresonators that support modulational instability for comb initiation, and mode-locking transitions resulting in coherent bright soliton-like pulse generation have been reported. However, some experiments show co…
▽ More
Kerr frequency combs from microresonators are now extensively investigated as a potentially portable technology for a variety of applications. Most studies employ anomalous dispersion microresonators that support modulational instability for comb initiation, and mode-locking transitions resulting in coherent bright soliton-like pulse generation have been reported. However, some experiments show comb generation in normal dispersion microresonators; simulations suggest the formation of dark pulse temporal profiles. Excitation of dark pulse solutions is difficult due to the lack of modulational instability in the effective blue-detuned pum** region; an excitation pathway has been demonstrated neither in experiment nor in simulation. Here we report experiments in which dark pulse combs are formed by mode-interaction-aided excitation; for the first time, a mode-locking transition is observed in the normal dispersion regime. The excitation pathway proposed is also supported by simulations.
△ Less
Submitted 16 August, 2015; v1 submitted 10 April, 2014;
originally announced April 2014.
-
Optical frequency comb technology for ultra-broadband radio-frequency photonics
Authors:
Victor Torres-Company,
Andrew M. Weiner
Abstract:
The outstanding phase-noise performance of optical frequency combs has led to a revolution in optical synthesis and metrology, covering a myriad of applications, from molecular spectroscopy to laser ranging and optical communications. However, the ideal characteristics of an optical frequency comb are application dependent. In this review, the different techniques for the generation and processing…
▽ More
The outstanding phase-noise performance of optical frequency combs has led to a revolution in optical synthesis and metrology, covering a myriad of applications, from molecular spectroscopy to laser ranging and optical communications. However, the ideal characteristics of an optical frequency comb are application dependent. In this review, the different techniques for the generation and processing of high-repetition-rate (>10 GHz) optical frequency combs with technologies compatible with optical communication equipment are covered. Particular emphasis is put on the benefits and prospects of this technology in the general field of radio-frequency photonics, including applications in high-performance microwave photonic filtering, ultra-broadband coherent communications, and radio-frequency arbitrary waveform generation.
△ Less
Submitted 11 March, 2014;
originally announced March 2014.
-
Investigation of Mode Interaction in Optical Microresonators for Kerr Frequency Comb Generation
Authors:
Yang Liu,
Yi Xuan,
Xiaoxiao Xue,
Pei-Hsun Wang,
Andrew J. Metcalf,
Steve Chen,
Minghao Qi,
Andrew M. Weiner
Abstract:
Mode interaction in silicon nitride micro-resonators is investigated. We provide clear experimental evidence of mode interaction between two family modes and mode interaction is demonstrated to be the cause of the comb generation in resonators with normal dispersion.
Mode interaction in silicon nitride micro-resonators is investigated. We provide clear experimental evidence of mode interaction between two family modes and mode interaction is demonstrated to be the cause of the comb generation in resonators with normal dispersion.
△ Less
Submitted 23 February, 2014;
originally announced February 2014.
-
Tunable Frequency Comb Generation from a Microring with a Thermal Heater
Authors:
Xiaoxiao Xue,
Yi Xuan,
Pei-Hsun Wang,
Jian Wang,
Dan E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We demonstrate a novel comb tuning method for microresonator-based Kerr comb generators. Continuously tunable, low-noise, and coherent comb generation is achieved in a CMOS-compatible silicon nitride microring resonator.
We demonstrate a novel comb tuning method for microresonator-based Kerr comb generators. Continuously tunable, low-noise, and coherent comb generation is achieved in a CMOS-compatible silicon nitride microring resonator.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Coherent Frequency Comb Generation in a Silicon Nitride Microresonator with Anomalous Dispersion
Authors:
Pei-Hsun Wang,
Yi Xuan,
Jian Wang,
Xiaoxiao Xue,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We observe a transition to a coherent-comb state in a SiN-microresonator with anomalous dispersion. Although ~300 fs pulse trains are generated after line-by-line sha**, the intensity within the microring does not appear to be pulse-like.
We observe a transition to a coherent-comb state in a SiN-microresonator with anomalous dispersion. Although ~300 fs pulse trains are generated after line-by-line sha**, the intensity within the microring does not appear to be pulse-like.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Drop-port study of microresonator frequency combs: power transfer and time-domain characterization
Authors:
Pei-Hsun Wang,
Yi Xuan,
Li Fan,
Leo Tom Varghese,
Jian Wang,
Yang Liu,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We use a drop-port geometry to study power transfer in silicon nitride on-chip microresonator frequency comb generators. In sharp contrast with the traditional transmission geometry, we observe smooth output spectra with comparable powers in the pump and adjacent comb lines. An observation of saturation in the drop-port output power is explained semi-empirically by introducing pump saturation into…
▽ More
We use a drop-port geometry to study power transfer in silicon nitride on-chip microresonator frequency comb generators. In sharp contrast with the traditional transmission geometry, we observe smooth output spectra with comparable powers in the pump and adjacent comb lines. An observation of saturation in the drop-port output power is explained semi-empirically by introducing pump saturation into a coupling of modes model. Autocorrelation measurements are performed on the drop-port output, without the need to filter out or suppress the strong pump line as is necessary in thru-port experiments. Passively mode-locked pulses are observed with a normal dispersion microcavity.
△ Less
Submitted 6 August, 2013; v1 submitted 31 May, 2013;
originally announced May 2013.
-
Observation of Correlation between Route to Formation, Coherence, Noise, and Communication Performance of Kerr Combs
Authors:
Pei-Hsun Wang,
Fahmida Ferdous,
Houxun Miao,
Jian Wang,
Daniel E. Leaird,
Kartik Srinivasan,
Lei Chen,
Vladimir Aksyuk,
Andrew M. Weiner
Abstract:
Microresonator optical frequency combs based on cascaded four-wave mixing are potentially attractive as a multi-wavelength source for on-chip optical communications. In this paper we compare time domain coherence, radio-frequency (RF) intensity noise, and individual line optical communications performance for combs generated from two different silicon nitride microresonators. The comb generated by…
▽ More
Microresonator optical frequency combs based on cascaded four-wave mixing are potentially attractive as a multi-wavelength source for on-chip optical communications. In this paper we compare time domain coherence, radio-frequency (RF) intensity noise, and individual line optical communications performance for combs generated from two different silicon nitride microresonators. The comb generated by one microresonator forms directly with lines spaced by a single free spectral range (FSR) and exhibits high coherence, low noise, and excellent 10 Gbit/s optical communications results. The comb generated by the second microresonator forms initially with multiple FSR line spacing, with additional lines later filling to reach single FSR spacing. This comb exhibits degraded coherence, increased intensity noise, and severely degraded communications performance. This study is to our knowledge the first to simultaneously investigate and observe a correlation between the route to comb formation, the coherence, noise, and optical communications performance of a Kerr comb.
△ Less
Submitted 27 October, 2012;
originally announced October 2012.
-
Probing Within Partially Coherent Microcavity Frequency Combs via Optical Pulse Sha**
Authors:
Fahmida Ferdous,
Houxun Miao,
Pei-Hsun Wang,
Daniel E. Leaird,
Kartik Srinivasan,
Lei Chen,
Vladimir Aksyuk,
Andrew M. Weiner
Abstract:
Recent investigations of microcavity frequency combs based on cascaded four-wave mixing have revealed a link between the evolution of the optical spectrum and the observed temporal coherence. Here we study a silicon nitride microresonator for which the initial four-wave mixing sidebands are spaced by multiple free spectral ranges (FSRs) from the pump, then fill in to yield a comb with single FSR s…
▽ More
Recent investigations of microcavity frequency combs based on cascaded four-wave mixing have revealed a link between the evolution of the optical spectrum and the observed temporal coherence. Here we study a silicon nitride microresonator for which the initial four-wave mixing sidebands are spaced by multiple free spectral ranges (FSRs) from the pump, then fill in to yield a comb with single FSR spacing, resulting in partial coherence. By using a pulse shaper to select and manipulate the phase of various subsets of spectral lines, we are able to probe the structure of the coherence within the partially coherent comb. Our data demonstrate strong variation in the degree of mutual coherence between different groups of lines and provide support for a simple model of partially coherent comb formation.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
A Silicon Optical Transistor
Authors:
Leo T. Varghese,
Li Fan,
Jian Wang,
Fuwan Gan,
Ben Niu,
Yi Xuan,
Andrew M. Weiner,
Minghao Qi
Abstract:
A fundamental road block for all-optical information processing is the difficulty in realizing a silicon optical transistor with the ability to provide optical gain, input output isolation and buffer action. In this work, we demonstrate an all-optical transistor using optical nonlinearity in microrings. By using weak light to control strong light, we observed an On/Off ratio up to 20 dB. It can co…
▽ More
A fundamental road block for all-optical information processing is the difficulty in realizing a silicon optical transistor with the ability to provide optical gain, input output isolation and buffer action. In this work, we demonstrate an all-optical transistor using optical nonlinearity in microrings. By using weak light to control strong light, we observed an On/Off ratio up to 20 dB. It can compensate losses in other optical devices and provide fan-out capability. The device is ultra compact and is compatible with current complementary metal-oxide-semiconductor (CMOS) processing.
△ Less
Submitted 24 April, 2012;
originally announced April 2012.
-
Comb-Based Radio-Frequency Photonic Filters with Rapid Tunability and High Selectivity
Authors:
V. R. Supradeepa,
Christopher M. Long,
Rui Wu,
Fahmida Ferdous,
Ehsan Hamidi,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Photonic technologies have received considerable attention for enhancement of radio-frequency (RF) electrical systems, including high-frequency analog signal transmission, control of phased arrays, analog-to-digital conversion, and signal processing. Although the potential of radio-frequency photonics for implementation of tunable electrical filters over broad RF bandwidths has been much discussed…
▽ More
Photonic technologies have received considerable attention for enhancement of radio-frequency (RF) electrical systems, including high-frequency analog signal transmission, control of phased arrays, analog-to-digital conversion, and signal processing. Although the potential of radio-frequency photonics for implementation of tunable electrical filters over broad RF bandwidths has been much discussed, realization of programmable filters with highly selective filter lineshapes and rapid reconfigurability has faced significant challenges. A new approach for RF photonic filters based on frequency combs offers a potential route to simultaneous high stopband attenuation, fast tunability, and bandwidth reconfiguration. In one configuration tuning of the RF passband frequency is demonstrated with unprecedented (~40 ns) speed by controlling the optical delay between combs. In a second, fixed filter configuration, cascaded four-wave mixing simultaneously broadens and smoothes comb spectra, resulting in Gaussian RF filter lineshapes exhibiting extremely high (>60 dB) main lobe to sidelobe suppression ratio and (>70 dB) stopband attenuation.
△ Less
Submitted 25 June, 2012; v1 submitted 3 May, 2011;
originally announced May 2011.
-
Gaussian-shaped Optical Frequency Comb Generation for Microwave Photonic Filtering
Authors:
Rui Wu,
Christopher M. Long,
Ehsan Hamidi,
V. R. Supradeepa,
Min Hyup Song,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Using only electro-optic modulators, we generate a 41-line 10-GHz Gaussian-shaped optical frequency comb. We use this comb to demonstrate apodized microwave photonic filters with greater than 43-dB sidelobe suppression without the need for a pulse shaper.
Using only electro-optic modulators, we generate a 41-line 10-GHz Gaussian-shaped optical frequency comb. We use this comb to demonstrate apodized microwave photonic filters with greater than 43-dB sidelobe suppression without the need for a pulse shaper.
△ Less
Submitted 21 April, 2011; v1 submitted 20 April, 2011;
originally announced April 2011.
-
Spectral Line-by-Line Pulse Sha** of an On-Chip Microresonator Frequency Comb
Authors:
Fahmida Ferdous,
Houxun Miao,
Daniel E. Leaird,
Kartik Srinivasan,
Jian Wang,
Lei Chen,
Leo Tom Varghese,
A. M. Weiner
Abstract:
We report, for the first time to the best of our knowledge, spectral phase characterization and line-by-line pulse sha** of an optical frequency comb generated by nonlinear wave mixing in a microring resonator. Through programmable pulse sha** the comb is compressed into a train of near-transform-limited pulses of \approx 300 fs duration (intensity full width half maximum) at 595 GHz repetitio…
▽ More
We report, for the first time to the best of our knowledge, spectral phase characterization and line-by-line pulse sha** of an optical frequency comb generated by nonlinear wave mixing in a microring resonator. Through programmable pulse sha** the comb is compressed into a train of near-transform-limited pulses of \approx 300 fs duration (intensity full width half maximum) at 595 GHz repetition rate. An additional, simple example of optical arbitrary waveform generation is presented. The ability to characterize and then stably compress the frequency comb provides new data on the stability of the spectral phase and suggests that random relative frequency shifts due to uncorrelated variations of frequency dependent phase are at or below the 100 microHertz level.
△ Less
Submitted 11 March, 2011;
originally announced March 2011.
-
Bandwidth scaling and spectral flatness enhancement of optical frequency combs from phase modulated continuous-wave lasers using cascaded four-wave mixing
Authors:
V. R. Supradeepa,
Andrew M. Weiner
Abstract:
We introduce a new cascaded four-wave mixing technique which scales up the bandwidth of frequency combs generated by phase modulation of a continuous wave laser while simultaneously enhancing the spectral flatness. As a result we demonstrate a 10 GHz frequency comb with over 100 lines in a 10-dB bandwidth in which a record 75 lines are within a flatness of 1-dB. The cascaded four-wave mixing proce…
▽ More
We introduce a new cascaded four-wave mixing technique which scales up the bandwidth of frequency combs generated by phase modulation of a continuous wave laser while simultaneously enhancing the spectral flatness. As a result we demonstrate a 10 GHz frequency comb with over 100 lines in a 10-dB bandwidth in which a record 75 lines are within a flatness of 1-dB. The cascaded four-wave mixing process increases the bandwidth of the initial comb generated by modulation of a CW laser by a factor of five. The broadband comb has approximately quadratic spectral phase, which is compensated upon propagation in single mode fiber, resulting in a 10 GHz train of 940 fs pulses
△ Less
Submitted 9 November, 2012; v1 submitted 12 October, 2010;
originally announced October 2010.
-
Generation of very flat optical frequency combs from continuous-wave lasers using cascaded intensity and phase modulators driven by tailored radio frequency waveforms
Authors:
Rui Wu,
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by t…
▽ More
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by the power handling capability of the phase modulator, and this can be scaled without compromising the spectral flatness. Furthermore, the spectral phase of the generated combs in our scheme is almost purely quadratic which, as we will demonstrate, allows for very high quality pulse compression using only single mode fiber.
△ Less
Submitted 23 September, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
New Aspects of Temporal Dispersion in High Resolution Fourier Pulse Sha**: A Quantitative Description with Virtually Imaged Phased Array Pulse Shapers
Authors:
V. R. Supradeepa,
Ehsan Hamidi,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We report new aspects of temporal dispersion in Fourier pulse shapers which contain spectral dispersers with a nonlinear frequency to space map**. These effects are particularly important in high resolution operation since high resolution dispersers typically exhibit pronounced nonlinear angular dispersion over relatively small bandwidths. In this paper we present a general discussion of the new…
▽ More
We report new aspects of temporal dispersion in Fourier pulse shapers which contain spectral dispersers with a nonlinear frequency to space map**. These effects are particularly important in high resolution operation since high resolution dispersers typically exhibit pronounced nonlinear angular dispersion over relatively small bandwidths. In this paper we present a general discussion of the new effects followed by quantitative analysis and experimental verification for pulse shapers which utilize a virtually imaged phased array (VIPA) as the spectral disperser. Compared to the well known 4f configuration, our results demonstrate a substantial modification to the placement of the optical components required to obtain zero temporal dispersion. Furthermore, spectral phase variations associated with nonzero dispersion coupled with contributions from multiple diffraction orders are shown to give rise to a dramatic new spectral interference effect, which can be used to monitor temporal dispersion purely in the spectral domain. We expect the effects we present in this paper to become prominent even for more conventional diffraction grating based pulse shapers for bandwidths sufficiently large that nonlinear spectral map** becomes strong.
△ Less
Submitted 23 September, 2010; v1 submitted 26 April, 2010;
originally announced April 2010.
-
Reconfigurable all-diffractive optical filters using phase-only spatial light modulators
Authors:
Gladys Minguez-Vega,
V. R. Supradeepa,
Omel Mendoza-Yero,
Andrew M. Weiner
Abstract:
We demonstrate a reconfigurable optical filter implemented using a phase-only two-dimensional liquid crystal on silicon spatial light modulator. To achieve this we utilize two different approaches leading to two different configurations in the modulator. The first one, based on a spatially patterned diffractive lens permits to obtain the desired spectrum along the optical axis and, in the second o…
▽ More
We demonstrate a reconfigurable optical filter implemented using a phase-only two-dimensional liquid crystal on silicon spatial light modulator. To achieve this we utilize two different approaches leading to two different configurations in the modulator. The first one, based on a spatially patterned diffractive lens permits to obtain the desired spectrum along the optical axis and, in the second one, based on a generalized spectrometer, it is found outside of the optical axis. Experimental results show good agreement with the theory and indicate the validity of this technique.
△ Less
Submitted 23 September, 2010; v1 submitted 16 April, 2010;
originally announced April 2010.
-
Self-referenced characterization of optical frequency combs and arbitrary waveforms using a simple, linear, zero-delay implementation of spectral shearing interferometry
Authors:
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing two different high repetition rate (~10 GHz) frequency comb sources, generated respectively by strong external and intracavity phase modulation of a continuous-w…
▽ More
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing two different high repetition rate (~10 GHz) frequency comb sources, generated respectively by strong external and intracavity phase modulation of a continuous-wave laser. This technique is easy to implement, requiring only an intensity modulator and an optical spectrum analyzer (OSA), and is demonstrated to work at average power levels down to 100nW (10aJ/pulse at 10 GHz). By exploiting the long coherence lengths of these frequency combs and the self-referenced nature of the measurement, we also demonstrate a simple single-ended measurement of dispersion and dispersion slope in long lengths of fiber (>25km).
△ Less
Submitted 23 September, 2010; v1 submitted 31 October, 2009;
originally announced November 2009.
-
Fast Characterization of Dispersion and Dispersion Slope of Optical Fiber Links using Spectral Interferometry with Frequency Combs
Authors:
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous spectral interferometry experiments limited to fiber lengths of meters, the long coherence length and the periodic delay properties of frequency combs, coupled w…
▽ More
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous spectral interferometry experiments limited to fiber lengths of meters, the long coherence length and the periodic delay properties of frequency combs, coupled with fast data acquisition, enable spectral interferometric characterization of fibers longer by several orders of magnitude. We expect that our method will be useful to recently proposed lightwave techniques like coherent WDM and to coherent modulation formats by providing a real time monitoring capability for the link dispersion. Another area of application would be in stabilization of systems which perform frequency and timing distribution over long fiber links using stabilized optical frequency combs.
△ Less
Submitted 1 February, 2010; v1 submitted 23 July, 2009;
originally announced July 2009.
-
Single Shot Amplitude and Phase Characterization of Optical Arbitrary Waveforms
Authors:
V. R. Supradeepa,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Using a time-gated dual quadrature spectral interferometry technique, for the first time we demonstrate single-shot characterization of both spectral amplitude and phase of ~1THz bandwidth optical arbitrary waveforms generated from a 10 GHz frequency comb. Our measurements provide a temporal resolution of 1ps over a record length of 100ps. Singleshot characterization becomes particularly relevan…
▽ More
Using a time-gated dual quadrature spectral interferometry technique, for the first time we demonstrate single-shot characterization of both spectral amplitude and phase of ~1THz bandwidth optical arbitrary waveforms generated from a 10 GHz frequency comb. Our measurements provide a temporal resolution of 1ps over a record length of 100ps. Singleshot characterization becomes particularly relevant when waveform synthesis operations are updated at the repetition rate of the comb allowing creation of potentially infinite record length waveforms. We first demonstrate unambiguous single shot retrieval using rapidly updating waveforms. We then perform additional single-shot measurements of static user-defined waveforms generated via line-by-line pulse sha**.
△ Less
Submitted 31 July, 2009; v1 submitted 14 July, 2009;
originally announced July 2009.